APRISAXE-MIB-4RF

1183 objects

MIB for the AprisaXE project

Imported Objects

APRISAXE-TC-4RF	AprisaXE2WireSignalState AprisaXE4WInputLevel AprisaXE4WOutputLevel AprisaXE4WRxGain AprisaXE4WTxGain AprisaXEAdcVoltage AprisaXEAdpcmCompression AprisaXEAlarmMapping AprisaXEAlarmOutput AprisaXEAlarmPolarity AprisaXEAlarmSource AprisaXEAlarmType AprisaXECardType AprisaXECCActivationStatus AprisaXEChannelControlType AprisaXEConnectionID AprisaXEDataStatus AprisaXEDbValue AprisaXEDefaultAction AprisaXEEthernetFrameRate AprisaXEEthernetGroup AprisaXEEthernetGrouping AprisaXEEthernetPortNumber AprisaXEEthernetPortPriority AprisaXEEthernetPrioQueueMapping AprisaXEEthernetPrioQueueScheduling AprisaXEFXOCountry AprisaXEFXOInputLevel AprisaXEFXOOutputLevel AprisaXEFXSInputLevel AprisaXEFXSOutputLevel AprisaXEFXSPathMute AprisaXEFXSPMLevel AprisaXEHardwareVersion AprisaXEHssSerialMode AprisaXEInterfaceCnxnType AprisaXEIQData AprisaXEPcmLaw AprisaXEPcmMode AprisaXEPortNumber AprisaXEPSCActiveRadio AprisaXEPSCActiveTx AprisaXEQuadJetConnectionType AprisaXEQuadJetLineEncoding AprisaXEQuadJetLoopbacks AprisaXEQuadJetMultiframeEnable AprisaXEQuadJetTrafficType AprisaXEQuadJetWaveFormShapers AprisaXESerialEquipmentMode AprisaXESignalState AprisaXESlotNumber AprisaXETdmBus AprisaXETdmPortType
COMMON-TC-4RF	FourRFAlarmEnabled FourRFAlarmPresent FourRFAlarmSeverity FourRFAlarmStatus FourRFChannelWidth FourRFClockSource FourRFErrorCounter FourRFFanStatus FourRFFrequency FourRFHardwareVersion FourRFImageVersion FourRFLoopback FourRFMHSBCommand FourRFMHSBStatus FourRFModulationType FourRFNetworkClockSelect FourRFNetworkClockStatus FourRFProcessResultType FourRFRfBand FourRFRSSI FourRFSerialNumber FourRFSNR FourRFTemperature FourRFTxPower
MIB-4RF	fourRFModules
PRODUCTS-MIB-4RF	-- 4RF Specific imports fourRFAprisaXE
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	-- Standard imports MODULE-IDENTITY Counter32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString TEXTUAL-CONVENTION

OID	Name	Access	Status	Description
1.3.6.1.4.1.14817.2.5	IdentityfourRFAprisaXEModule			MIB for the AprisaXE project
1.3.6.1.4.1.14817.7.3.1	IdentityaprisaXEConfig		current	The root of the OID sub-tree for the AprisaXE product configuration.
1.3.6.1.4.1.14817.7.3.1.1	IdentityaprisaXEGroups		current	The root of the OID sub-tree for the AprisaXE object groups.
1.3.6.1.4.1.14817.7.3.1.1.1	GroupaprisaXETerminalGroup		current	The AprisaXE terminal settings group.
1.3.6.1.4.1.14817.7.3.1.1.6	GroupaprisaXEPerformanceGroup		current	The AprisaXE terminal performance group.
1.3.6.1.4.1.14817.7.3.1.1.11	GroupaprisaXEExternalAlarm1Group		current	The AprisaXE first external alarm input group.
1.3.6.1.4.1.14817.7.3.1.1.12	GroupaprisaXEExternalAlarmOutputOneGroup		current	The AprisaXE first external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.13	GroupaprisaXEExternalAlarmOutputTwoGroup		current	The AprisaXE second external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.14	GroupaprisaXEExternalAlarmOutputThreeGroup		current	The AprisaXE third external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.15	GroupaprisaXEExternalAlarmOutputFourGroup		current	The AprisaXE fourth external alarm output group.
1.3.6.1.4.1.14817.7.3.1.1.16	GroupaprisaXEExternalAlarm2Group		current	The AprisaXE second external alarm input group.
1.3.6.1.4.1.14817.7.3.1.1.17	GroupaprisaXEExternalAlarmsGroup		current	The AprisaXE general external alarm details group.
1.3.6.1.4.1.14817.7.3.1.1.21	GroupaprisaXERemoteAlarmGroup		obsolete	The AprisaXE remote alarm status group. This group has been replaced by the now mappable external alarm output OIDs aprisaXEExternalAlarmOutputXXXGroup.
1.3.6.1.4.1.14817.7.3.1.1.23	GroupaprisaXEMHSBGroup		current	The aprisaXE MHSB group.
1.3.6.1.4.1.14817.7.3.1.1.26	GroupaprisaXEFanGroup		current	The AprisaXE fan status group.
1.3.6.1.4.1.14817.7.3.1.1.32	GroupaprisaXEAlarmControlGroup		current	The AprisaXE alarm control group.
1.3.6.1.4.1.14817.7.3.1.1.36	GroupaprisaXETransmitterGroup		current	The AprisaXE transmitter settings group.
1.3.6.1.4.1.14817.7.3.1.1.46	GroupaprisaXETReceiverGroup		current	The AprisaXE Receiver settings group.
1.3.6.1.4.1.14817.7.3.1.1.53	GroupaprisaXEModemGroup		current	The AprisaXE Modem settings group.
1.3.6.1.4.1.14817.7.3.1.1.56	GroupaprisaXEForwardPowerHiAlarmsGroup		obsolete	The AprisaXE forward power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.61	GroupaprisaXEForwardPowerLoAlarmsGroup		obsolete	The AprisaXE forward power low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.66	GroupaprisaXEReversePowerHiAlarmsGroup		obsolete	The AprisaXE reverse power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.71	GroupaprisaXEReversePowerLoAlarmsGroup		obsolete	The AprisaXE reverse power too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.76	GroupaprisaXETxPaTempAlarmsGroup		obsolete	The AprisaXE transmitter temperature too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.81	GroupaprisaXETxPaTempWarnAlarmsGroup		obsolete	The AprisaXE transmitter temperature warning alarm group.
1.3.6.1.4.1.14817.7.3.1.1.86	GroupaprisaXETxAgcHiAlarmsGroup		obsolete	The AprisaXE transmitter AGC too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.91	GroupaprisaXETxAgcLoAlarmsGroup		obsolete	The AprisaXE transmitter AGC too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.96	GroupaprisaXETxVtuneHiAlarmsGroup		obsolete	The AprisaXE transmitter VTUNE too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.101	GroupaprisaXETxVtuneLoAlarmsGroup		obsolete	The AprisaXE transmitter VTUNE too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.106	GroupaprisaXETx5VDigHiAlarmsGroup		obsolete	The AprisaXE transmitter 5V digital voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.111	GroupaprisaXETx5VDigLoAlarmsGroup		obsolete	The AprisaXE transmitter 5V digital voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.116	GroupaprisaXETx7VRfHiAlarmsGroup		obsolete	The AprisaXE transmitter 7V RF voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.121	GroupaprisaXETx7VRfLoAlarmsGroup		obsolete	The AprisaXE transmitter 7V RF voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.126	GroupaprisaXETx9VHiAlarmsGroup		obsolete	The AprisaXE transmitter 9V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.131	GroupaprisaXETx9VLoAlarmsGroup		obsolete	The AprisaXE transmitter 9V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.136	GroupaprisaXETx11VHiAlarmsGroup		obsolete	The AprisaXE transmitter 11V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.141	GroupaprisaXETx11VLoAlarmsGroup		obsolete	The AprisaXE transmitter 11V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.146	GroupaprisaXETx28VHiAlarmsGroup		obsolete	The AprisaXE transmitter 28V voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.151	GroupaprisaXETx28VLoAlarmsGroup		obsolete	The AprisaXE transmitter 28V voltage too low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.152	GroupaprisaXEReturnLossHiAlarmsGroup		current	The AprisaXE reverse power too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.153	GroupaprisaXETxSynthOutOfLockAlarmsGroup		current	The AprisaXE TX Synth out of lock alarm group.
1.3.6.1.4.1.14817.7.3.1.1.161	GroupaprisaXERxSynthOutOfLockAlarmsGroup		current	The AprisaXE Synth out of lock alarm group.
1.3.6.1.4.1.14817.7.3.1.1.166	GroupaprisaXERx12VAlarmsGroup		current	The AprisaXE 12V supply alarm group.
1.3.6.1.4.1.14817.7.3.1.1.171	GroupaprisaXERx3V3HiAlarmsGroup		obsolete	The AprisaXE 3.3V supply high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.176	GroupaprisaXERx3V3LoAlarmsGroup		obsolete	The AprisaXE 3.3V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.181	GroupaprisaXERx5VHiAlarmsGroup		obsolete	The AprisaXE 5V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.186	GroupaprisaXERx5VLoAlarmsGroup		obsolete	The AprisaXE 5V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.191	GroupaprisaXERx9VHiAlarmsGroup		obsolete	The AprisaXE 9V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.196	GroupaprisaXERx9VLoAlarmsGroup		obsolete	The AprisaXE 9V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.201	GroupaprisaXERxNeg1V5HiAlarmsGroup		obsolete	The AprisaXE Neg 1.5V supply High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.206	GroupaprisaXERxNeg1V5LoAlarmsGroup		obsolete	The AprisaXE Neg 1.5V supply low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.211	GroupaprisaXERxAgcHiAlarmsGroup		obsolete	The AprisaXE AGC high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.216	GroupaprisaXERxAgcLoAlarmsGroup		obsolete	The AprisaXE AGC low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.221	GroupaprisaXERxRssiHiAlarmsGroup		current	The AprisaXE RSSI High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.226	GroupaprisaXERxRssiLoAlarmsGroup		current	The AprisaXE RSSI low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.231	GroupaprisaXERxVtuneHiAlarmsGroup		obsolete	The AprisaXE Vtune High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.236	GroupaprisaXERxVtuneLoAlarmsGroup		obsolete	The AprisaXE Vtune low alarm group.
1.3.6.1.4.1.14817.7.3.1.1.241	GroupaprisaXERxEEAlarmsGroup		current	The AprisaXE EEPROM alarm group.
1.3.6.1.4.1.14817.7.3.1.1.250	GroupaprisaXETxADCChZeroHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Zero voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.251	GroupaprisaXETxADCChZeroLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Zero voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.252	GroupaprisaXETxADCChOneHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch One voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.253	GroupaprisaXETxADCChOneLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch One voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.254	GroupaprisaXETxADCChTwoHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Two voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.255	GroupaprisaXETxADCChTwoLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Two voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.256	GroupaprisaXETxADCChThreeHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Three voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.257	GroupaprisaXETxADCChThreeLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Three voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.258	GroupaprisaXETxADCChFourHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Four voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.259	GroupaprisaXETxADCChFourLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Four voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.260	GroupaprisaXETxADCChFiveHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Five voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.261	GroupaprisaXETxADCChFiveLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Five voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.262	GroupaprisaXETxADCChSixHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Six voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.263	GroupaprisaXETxADCChSixLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Six voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.264	GroupaprisaXETxADCChSevenHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Seven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.265	GroupaprisaXETxADCChSevenLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Seven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.266	GroupaprisaXETxADCChEightHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Eight voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.267	GroupaprisaXETxADCChEightLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Eight voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.268	GroupaprisaXETxADCChNineHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Nine voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.269	GroupaprisaXETxADCChNineLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Nine voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.270	GroupaprisaXETxADCChTenHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Ten voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.271	GroupaprisaXETxADCChTenLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Ten voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.272	GroupaprisaXETxADCChElevenHiAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Eleven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.273	GroupaprisaXETxADCChElevenLoAlarmsGroup		current	The aprisaXETx transmitter ADC Ch Eleven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.275	GroupaprisaXERxADCChZeroHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Zero voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.276	GroupaprisaXERxADCChZeroLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Zero voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.277	GroupaprisaXERxADCChOneHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch One voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.278	GroupaprisaXERxADCChOneLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch One voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.279	GroupaprisaXERxADCChTwoHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Two voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.280	GroupaprisaXERxADCChTwoLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Two voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.281	GroupaprisaXERxADCChThreeHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Three voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.282	GroupaprisaXERxADCChThreeLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Three voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.283	GroupaprisaXERxADCChFourHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Four voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.284	GroupaprisaXERxADCChFourLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Four voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.285	GroupaprisaXERxADCChFiveHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Five voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.286	GroupaprisaXERxADCChFiveLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Five voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.287	GroupaprisaXERxADCChSixHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Six voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.288	GroupaprisaXERxADCChSixLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Six voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.289	GroupaprisaXERxADCChSevenHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Seven voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.290	GroupaprisaXERxADCChSevenLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Seven voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.291	GroupaprisaXERxADCChEightHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Eight voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.292	GroupaprisaXERxADCChEightLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Eight voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.293	GroupaprisaXERxADCChNineHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Nine voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.294	GroupaprisaXERxADCChNineLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Nine voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.295	GroupaprisaXERxADCChTenHiAlarmsGroup		current	The aprisaXERx receiver ADC Ch Ten voltage too high alarm group.
1.3.6.1.4.1.14817.7.3.1.1.296	GroupaprisaXERxADCChTenLoAlarmsGroup		current	The aprisaXERx receiver ADC Ch Ten voltage too High alarm group.
1.3.6.1.4.1.14817.7.3.1.1.300	GroupaprisaXESoftwareUpgradeControlGroup		current	The Aprisa XE software upgrade group.
1.3.6.1.4.1.14817.7.3.1.1.305	GroupaprisaXEHSDParameterCompareGroup		current	The AprisaXE HSD Parameter Comparison group.
1.3.6.1.4.1.14817.7.3.1.2	IdentityaprisaXEObjects		current	The root of the OID sub-tree for the AprisaXE product objects.
1.3.6.1.4.1.14817.7.3.1.2.1	NodeaprisaXETerminal
1.3.6.1.4.1.14817.7.3.1.2.1.4	ScalaraprisaXETerminalRfChannelWidth	read-write	current	The terminal RF channel width, the options are: 20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz, 400kHz, 500kHz, 800kHz, 1MHz, 1.25MHz, 1.75…
1.3.6.1.4.1.14817.7.3.1.2.1.5	ScalaraprisaXETerminalRSSI	read-only	current	The terminal RSSI in dBm.
1.3.6.1.4.1.14817.7.3.1.2.1.6	ScalaraprisaXETerminalModulationState	read-write	current	The terminal modulation state.
1.3.6.1.4.1.14817.7.3.1.2.1.7	ScalaraprisaXETerminalClockReference	read-write	current	The terminal clock reference configuration: automatic - manual -
1.3.6.1.4.1.14817.7.3.1.2.1.8	ScalaraprisaXETerminalClockSource	read-write	current	The terminal clock source configuration: network - clocking is recovered from the synchronous network to which the terminal is connected. link - clocking is re…
1.3.6.1.4.1.14817.7.3.1.2.1.9	ScalaraprisaXETerminalAlarmStatus	read-only	current	The terminal alarm status, this reflects the overall status of the terminal. This will match the colour of the front panel control LED. The states used are noA…
1.3.6.1.4.1.14817.7.3.1.2.1.10	ScalaraprisaXETerminalRxAlarmStatus	read-only	current	The terminal alarm status, this reflects the overall RX status of the terminal. This will match the colour of the front panel RX LED. The states used are noAla…
1.3.6.1.4.1.14817.7.3.1.2.1.11	ScalaraprisaXETerminalTxAlarmStatus	read-only	current	The terminal alarm status, this reflects the overall TX status of the terminal. This will match the colour of the front panel TX LED. The states used are noAla…
1.3.6.1.4.1.14817.7.3.1.2.1.12	ScalaraprisaXETerminalBandwidth	read-only	current	This returns the total bandwidth available over the link in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.13	ScalaraprisaXEMotherboardSerialNumber	read-only	current	The unique serial number for the motherboard.
1.3.6.1.4.1.14817.7.3.1.2.1.14	ScalaraprisaXETerminalAllocatedBandwidth	read-only	current	This returns the total bandwidth allocated over the link in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.15	ScalaraprisaXETerminalLoopbackBandwidth	read-only	current	This returns the total loopback bandwidth allocated in kbps.
1.3.6.1.4.1.14817.7.3.1.2.1.16	ScalaraprisaXETerminalNetworkClockPrimaryStatus	read-only	current	This returns the status of the network clock primary source.
1.3.6.1.4.1.14817.7.3.1.2.1.17	ScalaraprisaXETerminalNetworkClockSecondaryStatus	read-only	current	This returns the status of the network clock secondary source.
1.3.6.1.4.1.14817.7.3.1.2.1.18	ScalaraprisaXETerminalNetworkClockCommand	read-write	current	Forces a change in the active network clock.
1.3.6.1.4.1.14817.7.3.1.2.1.19	ScalaraprisaXETerminalStartupComplete	read-only	current	Indicates whether the terminal startup sequence is complete.
1.3.6.1.4.1.14817.7.3.1.2.1.20	ScalaraprisaXETerminalImageAlarmClear	read-write	current	Indicates whether the terminal startup sequence is complete.
1.3.6.1.4.1.14817.7.3.1.2.1.21	ScalaraprisaXETerminalMuxStatus	read-only	obsolete	This indicates if the terminal is operating in Mux mode.
1.3.6.1.4.1.14817.7.3.1.2.1.22	ScalaraprisaXETerminalBootloaderDataVersion	read-only	current	This indicates the data version of the shared data field in the bootloader.
1.3.6.1.4.1.14817.7.3.1.2.1.23	ScalaraprisaXETerminalUploadFailAlarmClear	read-write	current	Used to clear a current Upload Failure Alarm.
1.3.6.1.4.1.14817.7.3.1.2.1.24	ScalaraprisaXETerminalEquipmentType	read-only	current	This indicates what type of equipment the terminal is.
1.3.6.1.4.1.14817.7.3.1.2.6	NodeaprisaXEPerformance
1.3.6.1.4.1.14817.7.3.1.2.6.1	ScalaraprisaXECorrectableErrorCount	read-only	current	The terminal correctable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.2	ScalaraprisaXEUncorrectableErrorCount	read-only	current	The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.3	ScalaraprisaXEModemSNR	read-only	current	The modem signal to noise ratio.
1.3.6.1.4.1.14817.7.3.1.2.6.4	ScalaraprisaXETxPacketCount	read-only	current	The terminal transmitted ethernet packet count (to link).
1.3.6.1.4.1.14817.7.3.1.2.6.5	ScalaraprisaXERxPacketCount	read-only	current	The terminal received ethernet packet count (from link).
1.3.6.1.4.1.14817.7.3.1.2.6.6	ScalaraprisaXERxPacketErrorCount	read-only	current	The terminal received ethernet packet error count (from link).
1.3.6.1.4.1.14817.7.3.1.2.6.7	ScalaraprisaXEErrorCounterCommand	read-write	current	Forces reset, freeze or unfreeze the error counters.
1.3.6.1.4.1.14817.7.3.1.2.6.8	ScalaraprisaXEErrorFreeSeconds	read-only	current	The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.9	ScalaraprisaXEErroredSeconds	read-only	current	The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.10	ScalaraprisaXEBERExponent	read-only	current	The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.11	ScalaraprisaXEPscSysUncorrectableErrorCount	read-only	current	The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.12	ScalaraprisaXEPscSysErrorFreeSeconds	read-only	current	The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.13	ScalaraprisaXEPscSysErroredSeconds	read-only	current	The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.14	ScalaraprisaXEPscSysBERExponent	read-only	current	The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.15	ScalaraprisaXEPscRadioAUncorrectableErrorCount	read-only	current	The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.16	ScalaraprisaXEPscRadioAErrorFreeSeconds	read-only	current	The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.17	ScalaraprisaXEPscRadioAErroredSeconds	read-only	current	The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.18	ScalaraprisaXEPscRadioABERExponent	read-only	current	The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.19	ScalaraprisaXEPscRadioBUncorrectableErrorCount	read-only	current	The terminal uncorrectable error count.
1.3.6.1.4.1.14817.7.3.1.2.6.20	ScalaraprisaXEPscRadioBErrorFreeSeconds	read-only	current	The number of Error Free Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.21	ScalaraprisaXEPscRadioBErroredSeconds	read-only	current	The number of Errored Seconds for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.6.22	ScalaraprisaXEPscRadioBBERExponent	read-only	current	The exponent of the Bit Error Rate for the terminal.
1.3.6.1.4.1.14817.7.3.1.2.11	NodeaprisaXEExternalAlarms
1.3.6.1.4.1.14817.7.3.1.2.11.1	NodeaprisaXEExternalAlarm1
1.3.6.1.4.1.14817.7.3.1.2.11.1.1	ScalaraprisaXEExternalAlarm1Status	read-only	current	The status of the first external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.1.2	ScalaraprisaXEExternalAlarm1Severity	read-write	current	The severity of the first external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.1.3	ScalaraprisaXEExternalAlarm1Enabled	read-write	current	Indicates whether the first external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.11.1.4	ScalaraprisaXEExternalAlarm1Mapping	read-write	current	This defines how the first external alarm input is mapped to the remote alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.1.5	ScalaraprisaXEExternalAlarm1Description	read-write	current	A description (user defined) for the external alarm.
1.3.6.1.4.1.14817.7.3.1.2.11.2	NodeaprisaXEExternalAlarm2
1.3.6.1.4.1.14817.7.3.1.2.11.2.1	ScalaraprisaXEExternalAlarm2Status	read-only	current	The status of the second external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.2.2	ScalaraprisaXEExternalAlarm2Severity	read-write	current	The severity of the second external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.2.3	ScalaraprisaXEExternalAlarm2Enabled	read-write	current	Indicates whether the second external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.11.2.4	ScalaraprisaXEExternalAlarm2Mapping	read-write	current	This defines how the second external alarm input is mapped to the remote alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.2.5	ScalaraprisaXEExternalAlarm2Description	read-write	current	A description (user defined) for the external alarm.
1.3.6.1.4.1.14817.7.3.1.2.11.3	ScalaraprisaXEExternalAlarmPolarity	read-write	current	Indicates the polarity used to indicate the presence of an alarm at an external alarm input.
1.3.6.1.4.1.14817.7.3.1.2.11.4	ScalaraprisaXEExternalAlarmOutputPolarity	read-write	current	Indicates the polarity used to indicate the presence of an alarm at an external alarm output, this may be different from the input polarity.
1.3.6.1.4.1.14817.7.3.1.2.11.5	NodeaprisaXEExternalAlarmOutputOne
1.3.6.1.4.1.14817.7.3.1.2.11.5.1	ScalaraprisaXEExternalAlarmOutputOneStatus	read-only	current	The status of the first external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.5.2	ScalaraprisaXEExternalAlarmOutputOneMapping	read-write	current	This defines how the first external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.6	NodeaprisaXEExternalAlarmOutputTwo
1.3.6.1.4.1.14817.7.3.1.2.11.6.1	ScalaraprisaXEExternalAlarmOutputTwoStatus	read-only	current	The status of the second external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.6.2	ScalaraprisaXEExternalAlarmOutputTwoMapping	read-write	current	This defines how the second external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.7	NodeaprisaXEExternalAlarmOutputThree
1.3.6.1.4.1.14817.7.3.1.2.11.7.1	ScalaraprisaXEExternalAlarmOutputThreeStatus	read-only	current	The status of the third external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.7.2	ScalaraprisaXEExternalAlarmOutputThreeMapping	read-write	current	This defines how the third external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.11.8	NodeaprisaXEExternalAlarmOutputFour
1.3.6.1.4.1.14817.7.3.1.2.11.8.1	ScalaraprisaXEExternalAlarmOutputFourStatus	read-only	current	The status of the fourth external alarm output.
1.3.6.1.4.1.14817.7.3.1.2.11.8.2	ScalaraprisaXEExternalAlarmOutputFourMapping	read-write	current	This defines how the fourth external alarm output is mapped to the alarms.
1.3.6.1.4.1.14817.7.3.1.2.16	NodeaprisaXERemoteAlarms
1.3.6.1.4.1.14817.7.3.1.2.16.1	ScalaraprisaXEMajorRemoteAlarmStatus	read-only	obsolete	The status of the remote major alarm.
1.3.6.1.4.1.14817.7.3.1.2.16.2	ScalaraprisaXEMajorRemoteAlarmOutput	read-write	obsolete	This defines how the remote major alarm is mapped to the external alarm outputs.
1.3.6.1.4.1.14817.7.3.1.2.16.10	ScalaraprisaXEMinorRemoteAlarmStatus	read-only	obsolete	The status of the remote minor alarm.
1.3.6.1.4.1.14817.7.3.1.2.16.11	ScalaraprisaXEMinorRemoteAlarmOutput	read-write	obsolete	This defines how the remote minor alarm is mapped to the external alarm outputs.
1.3.6.1.4.1.14817.7.3.1.2.19	NodeaprisaXEMHSB
1.3.6.1.4.1.14817.7.3.1.2.19.1	ScalaraprisaXEMHSBStatus	read-only	current	The state of an MHSB configured terminal.
1.3.6.1.4.1.14817.7.3.1.2.19.2	ScalaraprisaXEMHSBEnable	read-write	current	Set the terminal into Monitored Hot Standby Mode.
1.3.6.1.4.1.14817.7.3.1.2.19.3	ScalaraprisaXEMHSBCommand	read-write	current	Commands to apply while in MHSB mode.
1.3.6.1.4.1.14817.7.3.1.2.19.4	ScalaraprisaXEMHSBTerminalSelect	read-write	current	Configure terminal as terminal A or terminal B of an MHSB pair.
1.3.6.1.4.1.14817.7.3.1.2.19.5	ScalaraprisaXEMHSBSwitchoverStatus	read-only	current	Status of the alarm reflecting if a switchover has occurred.
1.3.6.1.4.1.14817.7.3.1.2.21	NodeaprisaXEFans
1.3.6.1.4.1.14817.7.3.1.2.21.1	ScalaraprisaXEFan1Status	read-only	current	The status of the fan one.
1.3.6.1.4.1.14817.7.3.1.2.21.2	ScalaraprisaXEFan2Status	read-only	current	The status of the fan two.
1.3.6.1.4.1.14817.7.3.1.2.21.3	ScalaraprisaXEFanEnable	read-write	current	Turn the fans on or off.
1.3.6.1.4.1.14817.7.3.1.2.26	TableaprisaXEAlarmTable	not-accessible	current	This table stores the currently active alarms. Up to 500 separate alarms will be stored in the table.
1.3.6.1.4.1.14817.7.3.1.2.26.1	RowaprisaXEAlarmEntry	not-accessible	current	The table entry index specification, just the alarm index.
1.3.6.1.4.1.14817.7.3.1.2.26.1.1	ColumnaprisaXEAlarmIndex	read-only	current	The index into the alarm table.
1.3.6.1.4.1.14817.7.3.1.2.26.1.2	ColumnaprisaXEAlarmSlot	read-only	current	The number of the slot generating the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.3	ColumnaprisaXEAlarmSource	read-only	current	The source of the alarm, a card type or external.
1.3.6.1.4.1.14817.7.3.1.2.26.1.4	ColumnaprisaXEAlarmPort	read-only	current	The source port of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.5	ColumnaprisaXEAlarmSeverity	read-only	current	The severity of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.6	ColumnaprisaXEAlarmType	read-only	current	The type of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.26.1.7	ColumnaprisaXEAlarmTime	read-only	current	The time that the alarm occurred.
1.3.6.1.4.1.14817.7.3.1.2.31	TableaprisaXEAlarmHistoryTable	not-accessible	current	This table stores a history of the alarms as they become active and cleared.
1.3.6.1.4.1.14817.7.3.1.2.31.1	RowaprisaXEAlarmHistoryEntry	not-accessible	current	The table entry index specification, just the alarm index.
1.3.6.1.4.1.14817.7.3.1.2.31.1.1	ColumnaprisaXEAlarmHistoryIndex	read-only	current	The index into the alarm history table.
1.3.6.1.4.1.14817.7.3.1.2.31.1.2	ColumnaprisaXEAlarmHistorySlot	read-only	current	The number of the slot generating the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.3	ColumnaprisaXEAlarmHistorySource	read-only	current	The source of the alarm, a card type or external.
1.3.6.1.4.1.14817.7.3.1.2.31.1.4	ColumnaprisaXEAlarmHistoryPort	read-only	current	The source port of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.5	ColumnaprisaXEAlarmHistorySeverity	read-only	current	The severity of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.6	ColumnaprisaXEAlarmHistoryType	read-only	current	The type of the alarm.
1.3.6.1.4.1.14817.7.3.1.2.31.1.7	ColumnaprisaXEAlarmHistoryPresent	read-only	current	Indicates whether the alarm is present or not.
1.3.6.1.4.1.14817.7.3.1.2.31.1.8	ColumnaprisaXEAlarmHistoryTime	read-only	current	The time that the alarm state change occurred.
1.3.6.1.4.1.14817.7.3.1.2.32	NodeaprisaXEAlarmControl
1.3.6.1.4.1.14817.7.3.1.2.32.1	ScalaraprisaXEAlarmHistoryCommand	read-write	current	Allows the alarm history table to be cleared.
1.3.6.1.4.1.14817.7.3.1.2.36	NodeaprisaXETransmitter
1.3.6.1.4.1.14817.7.3.1.2.36.1	ScalaraprisaXETransmitterStatus	read-only	current	Indicates whether the transmitter is currently on or off.
1.3.6.1.4.1.14817.7.3.1.2.36.2	ScalaraprisaXETransmitterCommand	read-write	current	Commands used to control the transmitter, currently the transmitter can be switched on and off. No other commands are defined.
1.3.6.1.4.1.14817.7.3.1.2.36.3	ScalaraprisaXETransmitterSynthesiserStatus	read-only	current	The status of the transmitter synthesiser.
1.3.6.1.4.1.14817.7.3.1.2.36.4	ScalaraprisaXETransmitter5VPowerStatus	read-only	current	The status of the transmitter 5V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.5	ScalaraprisaXETransmitter11VPowerStatus	read-only	current	The status of the transmitter 11V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.6	ScalaraprisaXETransmitter28VPowerStatus	read-only	current	The status of the transmitter 28V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.7	ScalaraprisaXETransmitterFrequency	read-write	current	The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency val…
1.3.6.1.4.1.14817.7.3.1.2.36.8	ScalaraprisaXETransmitterPower	read-write	current	The TX power value, the value should be entered in dB.
1.3.6.1.4.1.14817.7.3.1.2.36.9	ScalaraprisaXETransmitterAGC	read-only	obsolete	The Automatic Gain Control value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.10	ScalaraprisaXETransmitterForwardPower	read-only	obsolete	The forward power measurement value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.11	ScalaraprisaXETransmitterReversePower	read-only	obsolete	The reverse power value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.12	ScalaraprisaXETransmitterTemperature	read-only	obsolete	The temperature value in degrees Celcius.
1.3.6.1.4.1.14817.7.3.1.2.36.13	ScalaraprisaXETransmitterVTune	read-only	obsolete	The voltage output from TX synth.
1.3.6.1.4.1.14817.7.3.1.2.36.14	ScalaraprisaXETransmitter28VSupply	read-only	obsolete	The 28V supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.15	ScalaraprisaXETransmitter11VSupply	read-only	obsolete	The 11V supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.16	ScalaraprisaXETransmitter5VDigitalSupply	read-only	obsolete	The 5V digital supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.17	ScalaraprisaXETransmitter7VSupply	read-only	obsolete	The 7V RF supply rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.18	ScalaraprisaXETransmitter9VSupply	read-only	obsolete	The 9V supply synthesiser rail value in millivolts.
1.3.6.1.4.1.14817.7.3.1.2.36.19	ScalaraprisaXETransmitterCharacterisationDataStatus	read-only	current	The status of the transmitter characterisation data.
1.3.6.1.4.1.14817.7.3.1.2.36.20	ScalaraprisaXETransmitterSerialNumber	read-only	current	The unique module serial number for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.21	ScalaraprisaXETransmitterReturnLoss	read-only	current	The return loss for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.22	ScalaraprisaXETransmitterMibDataStatus	read-only	current	The status of the transmitter MIB data.
1.3.6.1.4.1.14817.7.3.1.2.36.23	ScalaraprisaXETransmitterADCChZero	read-only	current	The TX adc ch zero voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.24	ScalaraprisaXETransmitterADCChOne	read-only	current	The TX adc ch one voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.25	ScalaraprisaXETransmitterADCChTwo	read-only	current	The TX adc ch two voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.26	ScalaraprisaXETransmitterADCChThree	read-only	current	The TX adc ch three voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.27	ScalaraprisaXETransmitterADCChFour	read-only	current	The TX adc ch four voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.28	ScalaraprisaXETransmitterADCChFive	read-only	current	The TX adc ch five voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.29	ScalaraprisaXETransmitterADCChSix	read-only	current	The TX adc ch six voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.30	ScalaraprisaXETransmitterADCChSeven	read-only	current	The TX adc ch seven voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.31	ScalaraprisaXETransmitterADCChEight	read-only	current	The TX adc ch eight voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.32	ScalaraprisaXETransmitterADCChNine	read-only	current	The TX adc ch nine voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.33	ScalaraprisaXETransmitterADCChTen	read-only	current	The TX adc ch ten voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.34	ScalaraprisaXETransmitterADCChEleven	read-only	current	The TX adc ch eleven voltage.
1.3.6.1.4.1.14817.7.3.1.2.36.35	ScalaraprisaXETransmitterNeg5VPowerStatus	read-only	current	The status of the transmitter Negative 5V power supply.
1.3.6.1.4.1.14817.7.3.1.2.36.36	ScalaraprisaXETransmitterAmplifierBalanceStatus	read-only	current	The status of the transmitter Balanced Power Amplifier.
1.3.6.1.4.1.14817.7.3.1.2.36.37	ScalaraprisaXETransmitterTcxoAdjustment	read-write	current	The TX TCXO adjustment to be made by the customer, to tune the TCXO. This is a shift in DAC steps.
1.3.6.1.4.1.14817.7.3.1.2.36.38	ScalaraprisaXETransmitterSynthFileVersion	read-only	current	The version of the Synth File loaded from the filesystem.
1.3.6.1.4.1.14817.7.3.1.2.36.39	ScalaraprisaXETransmitterOperationalDataVersion	read-only	current	The version of the operational data for the transmitter.
1.3.6.1.4.1.14817.7.3.1.2.36.40	ScalaraprisaXETransmitterSwCompatibility	read-only	current	The transmitter software compatibility number.
1.3.6.1.4.1.14817.7.3.1.2.51	NodeaprisaXEReceiver
1.3.6.1.4.1.14817.7.3.1.2.51.1	ScalaraprisaXEReceiverStatus	read-only	current	Status of the receiver, currently the receiver can be On/Off and the loopback can be On/Off.
1.3.6.1.4.1.14817.7.3.1.2.51.2	ScalaraprisaXEReceiverCommand	read-write	current	Commands used to control the receiver, currently the receiver can be switched on and off and the loopback option switched on and off.
1.3.6.1.4.1.14817.7.3.1.2.51.3	ScalaraprisaXEReceiverSynthesiserStatus	read-only	current	The status of the receiver synthesiser.
1.3.6.1.4.1.14817.7.3.1.2.51.4	ScalaraprisaXEReceiver12VPowerStatus	read-only	current	The status of the Receiver 12V power supply.
1.3.6.1.4.1.14817.7.3.1.2.51.5	ScalaraprisaXEReceiverFrequency	read-write	current	The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency val…
1.3.6.1.4.1.14817.7.3.1.2.51.6	ScalaraprisaXEReceiverRSSI	read-only	current	The characterised RSSI Voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.8	ScalaraprisaXEReceiverTemperature	read-only	current	The temperature value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.9	ScalaraprisaXEReceiverVTune	read-only	obsolete	The voltage output from RX synth value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.10	ScalaraprisaXEReceiver9VSupply	read-only	obsolete	The 9V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.11	ScalaraprisaXEReceiver5VSupply	read-only	obsolete	The 5V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.12	ScalaraprisaXEReceiverModemAGC	read-only	obsolete	The modem AGC, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.13	ScalaraprisaXEReceiverNeg1V5Supply	read-only	obsolete	The -1.5V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.14	ScalaraprisaXEReceiver3V3Supply	read-only	obsolete	The 3.3V supply rail value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.15	ScalaraprisaXEReceiverDacTest	read-only	obsolete	The DacTest value, this should only be accessible in engineering mode.
1.3.6.1.4.1.14817.7.3.1.2.51.16	ScalaraprisaXEReceiverCharacterisationDataStatus	read-only	current	The status of the receiver characterisation data.
1.3.6.1.4.1.14817.7.3.1.2.51.17	ScalaraprisaXEReceiverSerialNumber	read-only	current	The unique module serial number for the receiver.
1.3.6.1.4.1.14817.7.3.1.2.51.18	ScalaraprisaXEReceiverRfLoopback	read-write	current	Enables and disabled RF loopback.
1.3.6.1.4.1.14817.7.3.1.2.51.19	ScalaraprisaXEReceiverRfLoopbackTimeout	read-write	current	The number of seconds after which RF loopback should timeout.
1.3.6.1.4.1.14817.7.3.1.2.51.20	ScalaraprisaXEReceiverMibDataStatus	read-only	current	The status of the receiver MIB data.
1.3.6.1.4.1.14817.7.3.1.2.51.21	ScalaraprisaXEReceiverADCChZero	read-only	current	The RX adc ch zero voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.22	ScalaraprisaXEReceiverADCChOne	read-only	current	The RX adc ch one voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.23	ScalaraprisaXEReceiverADCChTwo	read-only	current	The RX adc ch two voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.24	ScalaraprisaXEReceiverADCChThree	read-only	current	The RX adc ch three voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.25	ScalaraprisaXEReceiverADCChFour	read-only	current	The RX adc ch four voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.26	ScalaraprisaXEReceiverADCChFive	read-only	current	The RX adc ch five voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.27	ScalaraprisaXEReceiverADCChSix	read-only	current	The RX adc ch six voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.28	ScalaraprisaXEReceiverADCChSeven	read-only	current	The RX adc ch seven voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.29	ScalaraprisaXEReceiverADCChEight	read-only	current	The RX adc ch eight voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.30	ScalaraprisaXEReceiverADCChNine	read-only	current	The RX adc ch nine voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.31	ScalaraprisaXEReceiverADCChTen	read-only	current	The RX adc ch ten voltage.
1.3.6.1.4.1.14817.7.3.1.2.51.32	ScalaraprisaXEReceiverRSSIThresQPSKLowerOn	read-write	current	The QPSK Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.33	ScalaraprisaXEReceiverRSSIThres16QAMLowerOn	read-write	current	The 16QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.34	ScalaraprisaXEReceiverRSSIThres32QAMLowerOn	read-write	current	The 32QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.35	ScalaraprisaXEReceiverRSSIThres64QAMLowerOn	read-write	current	The 64QAM Lower ON RSSI Threshold.
1.3.6.1.4.1.14817.7.3.1.2.51.36	ScalaraprisaXEReceiverSynthFileVersion	read-only	current	The version of the Synth File loaded from the filesystem.
1.3.6.1.4.1.14817.7.3.1.2.51.37	ScalaraprisaXEReceiverOperationalDataVersion	read-only	current	The version of the operational data of the receiver.
1.3.6.1.4.1.14817.7.3.1.2.51.38	ScalaraprisaXEReceiverSwCompatibility	read-only	current	The receiver software compatibility number.
1.3.6.1.4.1.14817.7.3.1.2.61	NodeaprisaXEModem
1.3.6.1.4.1.14817.7.3.1.2.61.1	ScalaraprisaXEModemDemodAligmentStatus	read-only	current	Status of the demodulator alignment.
1.3.6.1.4.1.14817.7.3.1.2.61.2	ScalaraprisaXEModemTdmAligmentStatus	read-only	current	Status of the TDM alignment.
1.3.6.1.4.1.14817.7.3.1.2.61.3	ScalaraprisaXEModemRefAStatus	read-only	current	Status of the REFa clock.
1.3.6.1.4.1.14817.7.3.1.2.61.4	ScalaraprisaXEModemRefBStatus	read-only	current	Status of the REFb clock.
1.3.6.1.4.1.14817.7.3.1.2.61.5	ScalaraprisaXEModemUncorrectableBlockCount	read-only	current	Count of uncorrectable blocks since last read.
1.3.6.1.4.1.14817.7.3.1.2.61.6	ScalaraprisaXEModemIQData	read-only	current	A list of I/Q data pairs, this is a sequence of byes values the first byte is an I value, the second a Q value.
1.3.6.1.4.1.14817.7.3.1.2.61.7	ScalaraprisaXEModemSyncStatus	read-only	current	Status of the link lock.
1.3.6.1.4.1.14817.7.3.1.2.61.8	ScalaraprisaXEModemFreqOffsetEnable	read-write	current	Turn the Modulator frequency offset of 50kHz on or off.
1.3.6.1.4.1.14817.7.3.1.2.61.9	ScalaraprisaXEModemInterleaverEnable	read-write	current	Interleaver being used on the modem. Trade off between link latency and FEC performance.
1.3.6.1.4.1.14817.7.3.1.2.61.10	ScalaraprisaXEModemQPSKCoding	read-write	current	Encoding and Decoding being used for QPSK. Can be either Gray coded or non Gray coded.
1.3.6.1.4.1.14817.7.3.1.2.61.11	ScalaraprisaXEModemConfigVersion	read-only	current	Modem Configuration file version.
1.3.6.1.4.1.14817.7.3.1.2.66	TableaprisaXEBoardTable	not-accessible	current	This table stores the basic information for the plugin slots.
1.3.6.1.4.1.14817.7.3.1.2.66.1	RowaprisaXEBoardEntry	not-accessible	current	Slot Information.
1.3.6.1.4.1.14817.7.3.1.2.66.1.1	ColumnaprisaXEBoardSlot	read-only	current	The slot number in which the board resides, the physical slots are numbered from zero to ten and mapped to one to eleven in the MIB. The motherboard is therefo…
1.3.6.1.4.1.14817.7.3.1.2.66.1.2	ColumnaprisaXEBoardType	read-only	current	The type of the board in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - tran…
1.3.6.1.4.1.14817.7.3.1.2.66.1.3	ColumnaprisaXEExpectedBoardType	read-write	current	The type of the board expected in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot…
1.3.6.1.4.1.14817.7.3.1.2.66.1.4	ColumnaprisaXEBoardHardwareVersion	read-only	current	Field indicating the hardware version for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.5	ColumnaprisaXEBoardFirmwareVersion	read-only	current	Field indicating the firmware version for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.6	ColumnaprisaXEBoardHSCNumber	read-only	current	Field indicating the hardware software configuration number for the board in the slot.
1.3.6.1.4.1.14817.7.3.1.2.66.1.7	ColumnaprisaXEBoardSerialNumber	read-only	current	Field indicating the module serial number for the card in the slot.
1.3.6.1.4.1.14817.7.3.1.2.86	NodeaprisaXELinkAlarms
1.3.6.1.4.1.14817.7.3.1.2.86.1	NodeaprisaXETransmitterAlarms
1.3.6.1.4.1.14817.7.3.1.2.86.1.1	NodeaprisaXEForwardPowerHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.1	ScalaraprisaXEForwardPowerHiAlarmStatus	read-only	obsolete	The status of the forward power too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.2	ScalaraprisaXEForwardPowerHiAlarmSeverity	read-only	obsolete	The severity of the forward power too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.3	ScalaraprisaXEForwardPowerHiAlarmEnabled	read-only	obsolete	Indicates whether the forward power too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.4	ScalaraprisaXEForwardPowerHiAlarmThreshold	read-only	obsolete	Indicates the level at which the forward power too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.1.5	ScalaraprisaXEForwardPowerHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the forward power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2	NodeaprisaXEForwardPowerLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.1	ScalaraprisaXEForwardPowerLoAlarmStatus	read-only	obsolete	The status of the forward power too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.2	ScalaraprisaXEForwardPowerLoAlarmSeverity	read-only	obsolete	The severity of the forward power too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.3	ScalaraprisaXEForwardPowerLoAlarmEnabled	read-only	obsolete	Indicates whether the forward power too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.4	ScalaraprisaXEForwardPowerLoAlarmThreshold	read-only	obsolete	Indicates the level at which the forward power too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.2.5	ScalaraprisaXEForwardPowerLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the forward power too low alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3	NodeaprisaXEReversePowerHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.1	ScalaraprisaXEReversePowerHiAlarmStatus	read-only	obsolete	The status of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.2	ScalaraprisaXEReversePowerHiAlarmSeverity	read-only	obsolete	The severity of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.3	ScalaraprisaXEReversePowerHiAlarmEnabled	read-only	obsolete	Indicates whether the reverse power out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.4	ScalaraprisaXEReversePowerHiAlarmThreshold	read-only	obsolete	Indicates the level at which the reverse power alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.3.5	ScalaraprisaXEReversePowerHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the reverse power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4	NodeaprisaXEReversePowerLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.1	ScalaraprisaXEReversePowerLoAlarmStatus	read-only	obsolete	The status of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.2	ScalaraprisaXEReversePowerLoAlarmSeverity	read-only	obsolete	The severity of the reverse power out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.3	ScalaraprisaXEReversePowerLoAlarmEnabled	read-only	obsolete	Indicates whether the reverse power out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.4	ScalaraprisaXEReversePowerLoAlarmThreshold	read-only	obsolete	Indicates the level at which the reverse power alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.4.5	ScalaraprisaXEReversePowerLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the reverse power alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5	NodeaprisaXETxPaTempAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.1	ScalaraprisaXETxPaTempAlarmStatus	read-only	obsolete	The status of the transmitter temperature too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.2	ScalaraprisaXETxPaTempAlarmSeverity	read-only	obsolete	The severity of the transmitter temperature too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.3	ScalaraprisaXETxPaTempAlarmEnabled	read-only	obsolete	Indicates whether the transmitter temperature too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.4	ScalaraprisaXETxPaTempAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter temperature too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.5.5	ScalaraprisaXETxPaTempAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter temperature too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6	NodeaprisaXETxPaTempWarnAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.1	ScalaraprisaXETxPaTempWarnAlarmStatus	read-only	obsolete	The status of the transmitter temperature warning alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.2	ScalaraprisaXETxPaTempWarnAlarmSeverity	read-only	obsolete	The severity of the transmitter temperature warning alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.3	ScalaraprisaXETxPaTempWarnAlarmEnabled	read-only	obsolete	Indicates whether the transmitter temperature warning alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.4	ScalaraprisaXETxPaTempWarnAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter temperature warning alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.6.5	ScalaraprisaXETxPaTempWarnAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter temperature warning will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7	NodeaprisaXETxAgcHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.1	ScalaraprisaXETxAgcHiAlarmStatus	read-only	obsolete	The status of the transmitter AGC too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.2	ScalaraprisaXETxAgcHiAlarmSeverity	read-only	obsolete	The severity of the transmitter AGC too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.3	ScalaraprisaXETxAgcHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter AGC too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.4	ScalaraprisaXETxAgcHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter AGC too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.7.5	ScalaraprisaXETxAgcHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter AGC too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8	NodeaprisaXETxAgcLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.1	ScalaraprisaXETxAgcLoAlarmStatus	read-only	obsolete	The status of the transmitter AGC too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.2	ScalaraprisaXETxAgcLoAlarmSeverity	read-only	obsolete	The severity of the transmitter AGC too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.3	ScalaraprisaXETxAgcLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter AGC too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.4	ScalaraprisaXETxAgcLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter AGC too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.8.5	ScalaraprisaXETxAgcLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter AGC too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9	NodeaprisaXETxVtuneHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.1	ScalaraprisaXETxVtuneHiAlarmStatus	read-only	obsolete	The status of the transmitter VTUNE too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.2	ScalaraprisaXETxVtuneHiAlarmSeverity	read-only	obsolete	The severity of the transmitter VTUNE too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.3	ScalaraprisaXETxVtuneHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter VTUNE too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.4	ScalaraprisaXETxVtuneHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter VTUNE too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.9.5	ScalaraprisaXETxVtuneHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter VTUNE too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10	NodeaprisaXETxVtuneLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.1	ScalaraprisaXETxVtuneLoAlarmStatus	read-only	obsolete	The status of the transmitter VTUNE too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.2	ScalaraprisaXETxVtuneLoAlarmSeverity	read-only	obsolete	The severity of the transmitter VTUNE too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.3	ScalaraprisaXETxVtuneLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter VTUNE too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.4	ScalaraprisaXETxVtuneLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter VTUNE too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.10.5	ScalaraprisaXETxVtuneLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter VTUNE too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11	NodeaprisaXETx5VDigHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.1	ScalaraprisaXETx5VDigHiAlarmStatus	read-only	obsolete	The status of the transmitter 5V digital voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.2	ScalaraprisaXETx5VDigHiAlarmSeverity	read-only	obsolete	The severity of the transmitter 5V digital voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.3	ScalaraprisaXETx5VDigHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 5V digital voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.4	ScalaraprisaXETx5VDigHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 5V digital voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.11.5	ScalaraprisaXETx5VDigHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 5V digital voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12	NodeaprisaXETx5VDigLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.1	ScalaraprisaXETx5VDigLoAlarmStatus	read-only	obsolete	The status of the transmitter 5V digital voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.2	ScalaraprisaXETx5VDigLoAlarmSeverity	read-only	obsolete	The severity of the transmitter 5V digital voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.3	ScalaraprisaXETx5VDigLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 5V digital voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.4	ScalaraprisaXETx5VDigLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 5V digital voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.12.5	ScalaraprisaXETx5VDigLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 5V digital voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13	NodeaprisaXETx7VRfHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.1	ScalaraprisaXETx7VRfHiAlarmStatus	read-only	obsolete	The status of the transmitter 7V RF voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.2	ScalaraprisaXETx7VRfHiAlarmSeverity	read-only	obsolete	The severity of the transmitter 7V RF voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.3	ScalaraprisaXETx7VRfHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 7V RF voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.4	ScalaraprisaXETx7VRfHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 7V RF voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.13.5	ScalaraprisaXETx7VRfHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 7V RF voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14	NodeaprisaXETx7VRfLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.1	ScalaraprisaXETx7VRfLoAlarmStatus	read-only	obsolete	The status of the transmitter 7V RF voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.2	ScalaraprisaXETx7VRfLoAlarmSeverity	read-only	obsolete	The severity of the transmitter 7V RF voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.3	ScalaraprisaXETx7VRfLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 7V RF voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.4	ScalaraprisaXETx7VRfLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 7V RF voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.14.5	ScalaraprisaXETx7VRfLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 7V RF voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15	NodeaprisaXETx9VHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.1	ScalaraprisaXETx9VHiAlarmStatus	read-only	obsolete	The status of the transmitter 9V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.2	ScalaraprisaXETx9VHiAlarmSeverity	read-only	obsolete	The severity of the transmitter 9V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.3	ScalaraprisaXETx9VHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 9V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.4	ScalaraprisaXETx9VHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 9V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.15.5	ScalaraprisaXETx9VHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 9V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16	NodeaprisaXETx9VLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.1	ScalaraprisaXETx9VLoAlarmStatus	read-only	obsolete	The status of the transmitter 9V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.2	ScalaraprisaXETx9VLoAlarmSeverity	read-only	obsolete	The severity of the transmitter 9V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.3	ScalaraprisaXETx9VLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 9V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.4	ScalaraprisaXETx9VLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 9V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.16.5	ScalaraprisaXETx9VLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 9V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17	NodeaprisaXETx11VHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.1	ScalaraprisaXETx11VHiAlarmStatus	read-only	obsolete	The status of the transmitter 11V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.2	ScalaraprisaXETx11VHiAlarmSeverity	read-only	obsolete	The severity of the transmitter 11V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.3	ScalaraprisaXETx11VHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 11V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.4	ScalaraprisaXETx11VHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 11V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.17.5	ScalaraprisaXETx11VHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 11V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18	NodeaprisaXETx11VLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.1	ScalaraprisaXETx11VLoAlarmStatus	read-only	obsolete	The status of the transmitter 11V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.2	ScalaraprisaXETx11VLoAlarmSeverity	read-only	obsolete	The severity of the transmitter 11V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.3	ScalaraprisaXETx11VLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 11V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.4	ScalaraprisaXETx11VLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 11V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.18.5	ScalaraprisaXETx11VLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 11V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19	NodeaprisaXETx28VHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.1	ScalaraprisaXETx28VHiAlarmStatus	read-only	obsolete	The status of the transmitter 28V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.2	ScalaraprisaXETx28VHiAlarmSeverity	read-only	obsolete	The severity of the transmitter 28V voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.3	ScalaraprisaXETx28VHiAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 28V voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.4	ScalaraprisaXETx28VHiAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 28V voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.19.5	ScalaraprisaXETx28VHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 28V voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20	NodeaprisaXETx28VLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.1	ScalaraprisaXETx28VLoAlarmStatus	read-only	obsolete	The status of the transmitter 28V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.2	ScalaraprisaXETx28VLoAlarmSeverity	read-only	obsolete	The severity of the transmitter 28V voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3	ScalaraprisaXETx28VLoAlarmEnabled	read-only	obsolete	Indicates whether the transmitter 28V voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.4	ScalaraprisaXETx28VLoAlarmThreshold	read-only	obsolete	Indicates the level at which the transmitter 28V voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.20.5	ScalaraprisaXETx28VLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the transmitter 28V voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21	NodeaprisaXETxSynthOutOfLockAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.1	ScalaraprisaXETxSynthOutOfLockAlarmStatus	read-only	current	The status of the TX synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.2	ScalaraprisaXETxSynthOutOfLockAlarmSeverity	read-only	current	The severity of the TX synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.21.3	ScalaraprisaXETxSynthOutOfLockAlarmEnabled	read-only	current	Indicates whether the TX synth out of lock alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22	NodeaprisaXEReturnLossHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.1	ScalaraprisaXEReturnLossHiAlarmStatus	read-only	current	The status of the return loss out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.2	ScalaraprisaXEReturnLossHiAlarmSeverity	read-only	current	The severity of the return loss out of limits alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.3	ScalaraprisaXEReturnLossHiAlarmEnabled	read-only	current	Indicates whether the return loss out of limits alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.4	ScalaraprisaXEReturnLossHiAlarmThreshold	read-write	current	Indicates the level at which the return loss alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.22.5	ScalaraprisaXEReturnLossHiAlarmClearThreshold	read-write	current	Indicates the level at which the return loss alarm will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23	NodeaprisaXETxADCChZeroHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.1	ScalaraprisaXETxADCChZeroHiAlarmName	read-only	current	The name of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.2	ScalaraprisaXETxADCChZeroHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.3	ScalaraprisaXETxADCChZeroHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.4	ScalaraprisaXETxADCChZeroHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.5	ScalaraprisaXETxADCChZeroHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Zero voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.23.6	ScalaraprisaXETxADCChZeroHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Zero voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24	NodeaprisaXETxADCChZeroLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.1	ScalaraprisaXETxADCChZeroLoAlarmName	read-only	current	The name of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.2	ScalaraprisaXETxADCChZeroLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.3	ScalaraprisaXETxADCChZeroLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.4	ScalaraprisaXETxADCChZeroLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.5	ScalaraprisaXETxADCChZeroLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.24.6	ScalaraprisaXETxADCChZeroLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25	NodeaprisaXETxADCChOneHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.1	ScalaraprisaXETxADCChOneHiAlarmName	read-only	current	The name of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.2	ScalaraprisaXETxADCChOneHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.3	ScalaraprisaXETxADCChOneHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.4	ScalaraprisaXETxADCChOneHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch One voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.5	ScalaraprisaXETxADCChOneHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch One voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.25.6	ScalaraprisaXETxADCChOneHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch One voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26	NodeaprisaXETxADCChOneLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.1	ScalaraprisaXETxADCChOneLoAlarmName	read-only	current	The name of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.2	ScalaraprisaXETxADCChOneLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.3	ScalaraprisaXETxADCChOneLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.4	ScalaraprisaXETxADCChOneLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch One voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.5	ScalaraprisaXETxADCChOneLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch One voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.26.6	ScalaraprisaXETxADCChOneLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch One voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27	NodeaprisaXETxADCChTwoHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.1	ScalaraprisaXETxADCChTwoHiAlarmName	read-only	current	The name of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.2	ScalaraprisaXETxADCChTwoHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.3	ScalaraprisaXETxADCChTwoHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.4	ScalaraprisaXETxADCChTwoHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Two voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.5	ScalaraprisaXETxADCChTwoHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Two voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.27.6	ScalaraprisaXETxADCChTwoHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Two voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28	NodeaprisaXETxADCChTwoLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.1	ScalaraprisaXETxADCChTwoLoAlarmName	read-only	current	The name of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.2	ScalaraprisaXETxADCChTwoLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.3	ScalaraprisaXETxADCChTwoLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.4	ScalaraprisaXETxADCChTwoLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Two voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.5	ScalaraprisaXETxADCChTwoLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Two voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.28.6	ScalaraprisaXETxADCChTwoLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Two voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29	NodeaprisaXETxADCChThreeHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.1	ScalaraprisaXETxADCChThreeHiAlarmName	read-only	current	The name of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.2	ScalaraprisaXETxADCChThreeHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.3	ScalaraprisaXETxADCChThreeHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.4	ScalaraprisaXETxADCChThreeHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Three voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.5	ScalaraprisaXETxADCChThreeHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Three voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.29.6	ScalaraprisaXETxADCChThreeHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Three voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30	NodeaprisaXETxADCChThreeLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.1	ScalaraprisaXETxADCChThreeLoAlarmName	read-only	current	The name of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.2	ScalaraprisaXETxADCChThreeLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.3	ScalaraprisaXETxADCChThreeLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.4	ScalaraprisaXETxADCChThreeLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Three voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.5	ScalaraprisaXETxADCChThreeLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Three voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.30.6	ScalaraprisaXETxADCChThreeLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Three voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31	NodeaprisaXETxADCChFourHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.1	ScalaraprisaXETxADCChFourHiAlarmName	read-only	current	The name of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.2	ScalaraprisaXETxADCChFourHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.3	ScalaraprisaXETxADCChFourHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.4	ScalaraprisaXETxADCChFourHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Four voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.5	ScalaraprisaXETxADCChFourHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Four voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.31.6	ScalaraprisaXETxADCChFourHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Four voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32	NodeaprisaXETxADCChFourLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.1	ScalaraprisaXETxADCChFourLoAlarmName	read-only	current	The name of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.2	ScalaraprisaXETxADCChFourLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.3	ScalaraprisaXETxADCChFourLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.4	ScalaraprisaXETxADCChFourLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Four voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.5	ScalaraprisaXETxADCChFourLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Four voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.32.6	ScalaraprisaXETxADCChFourLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Four voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33	NodeaprisaXETxADCChFiveHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.1	ScalaraprisaXETxADCChFiveHiAlarmName	read-only	current	The name of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.2	ScalaraprisaXETxADCChFiveHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.3	ScalaraprisaXETxADCChFiveHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.4	ScalaraprisaXETxADCChFiveHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Five voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.5	ScalaraprisaXETxADCChFiveHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Five voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.33.6	ScalaraprisaXETxADCChFiveHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Five voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34	NodeaprisaXETxADCChFiveLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.1	ScalaraprisaXETxADCChFiveLoAlarmName	read-only	current	The name of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.2	ScalaraprisaXETxADCChFiveLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.3	ScalaraprisaXETxADCChFiveLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.4	ScalaraprisaXETxADCChFiveLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Five voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.5	ScalaraprisaXETxADCChFiveLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Five voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.34.6	ScalaraprisaXETxADCChFiveLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Five voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35	NodeaprisaXETxADCChSixHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.1	ScalaraprisaXETxADCChSixHiAlarmName	read-only	current	The name of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.2	ScalaraprisaXETxADCChSixHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.3	ScalaraprisaXETxADCChSixHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.4	ScalaraprisaXETxADCChSixHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Six voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.5	ScalaraprisaXETxADCChSixHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Six voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.35.6	ScalaraprisaXETxADCChSixHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Six voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36	NodeaprisaXETxADCChSixLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.1	ScalaraprisaXETxADCChSixLoAlarmName	read-only	current	The name of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.2	ScalaraprisaXETxADCChSixLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.3	ScalaraprisaXETxADCChSixLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.4	ScalaraprisaXETxADCChSixLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Six voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.5	ScalaraprisaXETxADCChSixLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Six voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.36.6	ScalaraprisaXETxADCChSixLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Six voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37	NodeaprisaXETxADCChSevenHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.1	ScalaraprisaXETxADCChSevenHiAlarmName	read-only	current	The name of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.2	ScalaraprisaXETxADCChSevenHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.3	ScalaraprisaXETxADCChSevenHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.4	ScalaraprisaXETxADCChSevenHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.5	ScalaraprisaXETxADCChSevenHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Seven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.37.6	ScalaraprisaXETxADCChSevenHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Seven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38	NodeaprisaXETxADCChSevenLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.1	ScalaraprisaXETxADCChSevenLoAlarmName	read-only	current	The name of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.2	ScalaraprisaXETxADCChSevenLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.3	ScalaraprisaXETxADCChSevenLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.4	ScalaraprisaXETxADCChSevenLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.5	ScalaraprisaXETxADCChSevenLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.38.6	ScalaraprisaXETxADCChSevenLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39	NodeaprisaXETxADCChEightHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.1	ScalaraprisaXETxADCChEightHiAlarmName	read-only	current	The name of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.2	ScalaraprisaXETxADCChEightHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.3	ScalaraprisaXETxADCChEightHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.4	ScalaraprisaXETxADCChEightHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.5	ScalaraprisaXETxADCChEightHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Eight voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.39.6	ScalaraprisaXETxADCChEightHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Eight voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40	NodeaprisaXETxADCChEightLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.1	ScalaraprisaXETxADCChEightLoAlarmName	read-only	current	The name of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.2	ScalaraprisaXETxADCChEightLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.3	ScalaraprisaXETxADCChEightLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.4	ScalaraprisaXETxADCChEightLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.5	ScalaraprisaXETxADCChEightLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.40.6	ScalaraprisaXETxADCChEightLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41	NodeaprisaXETxADCChNineHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.1	ScalaraprisaXETxADCChNineHiAlarmName	read-only	current	The name of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.2	ScalaraprisaXETxADCChNineHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.3	ScalaraprisaXETxADCChNineHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.4	ScalaraprisaXETxADCChNineHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.5	ScalaraprisaXETxADCChNineHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Nine voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.41.6	ScalaraprisaXETxADCChNineHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Nine voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42	NodeaprisaXETxADCChNineLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.1	ScalaraprisaXETxADCChNineLoAlarmName	read-only	current	The name of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.2	ScalaraprisaXETxADCChNineLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.3	ScalaraprisaXETxADCChNineLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.4	ScalaraprisaXETxADCChNineLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.5	ScalaraprisaXETxADCChNineLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.42.6	ScalaraprisaXETxADCChNineLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43	NodeaprisaXETxADCChTenHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.1	ScalaraprisaXETxADCChTenHiAlarmName	read-only	current	The name of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.2	ScalaraprisaXETxADCChTenHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.3	ScalaraprisaXETxADCChTenHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.4	ScalaraprisaXETxADCChTenHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.5	ScalaraprisaXETxADCChTenHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Ten voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.43.6	ScalaraprisaXETxADCChTenHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Ten voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44	NodeaprisaXETxADCChTenLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.1	ScalaraprisaXETxADCChTenLoAlarmName	read-only	current	The name of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.2	ScalaraprisaXETxADCChTenLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.3	ScalaraprisaXETxADCChTenLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.4	ScalaraprisaXETxADCChTenLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.5	ScalaraprisaXETxADCChTenLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.44.6	ScalaraprisaXETxADCChTenLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45	NodeaprisaXETxADCChElevenHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.1	ScalaraprisaXETxADCChElevenHiAlarmName	read-only	current	The name of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.2	ScalaraprisaXETxADCChElevenHiAlarmStatus	read-only	current	The status of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.3	ScalaraprisaXETxADCChElevenHiAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Eleven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.4	ScalaraprisaXETxADCChElevenHiAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.5	ScalaraprisaXETxADCChElevenHiAlarmThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Eleven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.45.6	ScalaraprisaXETxADCChElevenHiAlarmClearThreshold	read-only	current	Indicates the level at which the transmitter ADC Ch Eleven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46	NodeaprisaXETxADCChElevenLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.1	ScalaraprisaXETxADCChElevenLoAlarmName	read-only	current	The name of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.2	ScalaraprisaXETxADCChElevenLoAlarmStatus	read-only	current	The status of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.3	ScalaraprisaXETxADCChElevenLoAlarmSeverity	read-only	current	The severity of the transmitter ADC Ch Eleven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.4	ScalaraprisaXETxADCChElevenLoAlarmEnabled	read-only	current	Indicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.5	ScalaraprisaXETxADCChElevenLoAlarmThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.1.46.6	ScalaraprisaXETxADCChElevenLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6	NodeaprisaXEReceiverAlarms
1.3.6.1.4.1.14817.7.3.1.2.86.6.1	NodeaprisaXERxSynthOutOfLockAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.1	ScalaraprisaXERxSynthOutOfLockAlarmStatus	read-only	current	The status of the Synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.2	ScalaraprisaXERxSynthOutOfLockAlarmSeverity	read-only	current	The severity of the Synth out of lock alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.1.3	ScalaraprisaXERxSynthOutOfLockAlarmEnabled	read-only	current	Indicates whether the Synth out of lock alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3	NodeaprisaXERx12VAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.1	ScalaraprisaXERx12VAlarmStatus	read-only	current	The status of the 12V supply alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.2	ScalaraprisaXERx12VAlarmSeverity	read-only	current	The severity of the 12V supply aprisaXERxVtuneLoAlarmalarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.3.3	ScalaraprisaXERx12VAlarmEnabled	read-only	current	Indicates whether the 12V supply alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4	NodeaprisaXERx3V3HiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.1	ScalaraprisaXERx3V3HiAlarmStatus	read-only	obsolete	The status of the 3.3V supply high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.2	ScalaraprisaXERx3V3HiAlarmSeverity	read-only	obsolete	The severity of the 3.3V supply high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.3	ScalaraprisaXERx3V3HiAlarmEnabled	read-only	obsolete	Indicates whether the 3.3V supply high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.4	ScalaraprisaXERx3V3HiAlarmThreshold	read-only	obsolete	Indicates the level at which the 3.3V supply high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.4.5	ScalaraprisaXERx3V3HiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 3.3V supply high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5	NodeaprisaXERx3V3LoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.1	ScalaraprisaXERx3V3LoAlarmStatus	read-only	obsolete	The status of the 3.3V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.2	ScalaraprisaXERx3V3LoAlarmSeverity	read-only	obsolete	The severity of the 3.3V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.3	ScalaraprisaXERx3V3LoAlarmEnabled	read-only	obsolete	Indicates whether the 3.3V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.4	ScalaraprisaXERx3V3LoAlarmThreshold	read-only	obsolete	Indicates the level at which the 3.3V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.5.5	ScalaraprisaXERx3V3LoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 3.3V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6	NodeaprisaXERx5VHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.1	ScalaraprisaXERx5VHiAlarmStatus	read-only	obsolete	The status of the 5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.2	ScalaraprisaXERx5VHiAlarmSeverity	read-only	obsolete	The severity of the 5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.3	ScalaraprisaXERx5VHiAlarmEnabled	read-only	obsolete	Indicates whether the 5V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.4	ScalaraprisaXERx5VHiAlarmThreshold	read-only	obsolete	Indicates the level at which the 5V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.6.5	ScalaraprisaXERx5VHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 5V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7	NodeaprisaXERx5VLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.1	ScalaraprisaXERx5VLoAlarmStatus	read-only	obsolete	The status of the 5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.2	ScalaraprisaXERx5VLoAlarmSeverity	read-only	obsolete	The severity of the 5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.3	ScalaraprisaXERx5VLoAlarmEnabled	read-only	obsolete	Indicates whether the 5V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.4	ScalaraprisaXERx5VLoAlarmThreshold	read-only	obsolete	Indicates the level at which the 5V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.7.5	ScalaraprisaXERx5VLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 5V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8	NodeaprisaXERx9VHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.1	ScalaraprisaXERx9VHiAlarmStatus	read-only	obsolete	The status of the 9V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.2	ScalaraprisaXERx9VHiAlarmSeverity	read-only	obsolete	The severity of the 9V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.3	ScalaraprisaXERx9VHiAlarmEnabled	read-only	obsolete	Indicates whether the 9V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.4	ScalaraprisaXERx9VHiAlarmThreshold	read-only	obsolete	Indicates the level at which the 9V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.8.5	ScalaraprisaXERx9VHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 9V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9	NodeaprisaXERx9VLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.1	ScalaraprisaXERx9VLoAlarmStatus	read-only	obsolete	The status of the 9V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.2	ScalaraprisaXERx9VLoAlarmSeverity	read-only	obsolete	The severity of the 9V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.3	ScalaraprisaXERx9VLoAlarmEnabled	read-only	obsolete	Indicates whether the 9V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.4	ScalaraprisaXERx9VLoAlarmThreshold	read-only	obsolete	Indicates the level at which the 9V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.9.5	ScalaraprisaXERx9VLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the 9V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10	NodeaprisaXERxNeg1V5HiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.1	ScalaraprisaXERxNeg1V5HiAlarmStatus	read-only	obsolete	The status of the Neg 1.5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.2	ScalaraprisaXERxNeg1V5HiAlarmSeverity	read-only	obsolete	The severity of the Neg 1.5V supply High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.3	ScalaraprisaXERxNeg1V5HiAlarmEnabled	read-only	obsolete	Indicates whether the Neg 1.5V supply High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.4	ScalaraprisaXERxNeg1V5HiAlarmThreshold	read-only	obsolete	Indicates the level at which the Neg 1.5V supply High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.10.5	ScalaraprisaXERxNeg1V5HiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the Neg 1.5V supply High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11	NodeaprisaXERxNeg1V5LoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.1	ScalaraprisaXERxNeg1V5LoAlarmStatus	read-only	obsolete	The status of the Neg 1.5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.2	ScalaraprisaXERxNeg1V5LoAlarmSeverity	read-only	obsolete	The severity of the Neg 1.5V supply low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.3	ScalaraprisaXERxNeg1V5LoAlarmEnabled	read-only	obsolete	Indicates whether the Neg 1.5V supply low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.4	ScalaraprisaXERxNeg1V5LoAlarmThreshold	read-only	obsolete	Indicates the level at which the Neg 1.5V supply low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.11.5	ScalaraprisaXERxNeg1V5LoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the Neg 1.5V supply low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12	NodeaprisaXERxAgcHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.1	ScalaraprisaXERxAgcHiAlarmStatus	read-only	obsolete	The status of the AGC high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.2	ScalaraprisaXERxAgcHiAlarmSeverity	read-only	obsolete	The severity of the AGC high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.3	ScalaraprisaXERxAgcHiAlarmEnabled	read-only	obsolete	Indicates whether the AGC high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.4	ScalaraprisaXERxAgcHiAlarmThreshold	read-only	obsolete	Indicates the level at which the AGC high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.12.5	ScalaraprisaXERxAgcHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the AGC high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13	NodeaprisaXERxAgcLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.1	ScalaraprisaXERxAgcLoAlarmStatus	read-only	obsolete	The status of the AGC low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.2	ScalaraprisaXERxAgcLoAlarmSeverity	read-only	obsolete	The severity of the AGC low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.3	ScalaraprisaXERxAgcLoAlarmEnabled	read-only	obsolete	Indicates whether the AGC low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.4	ScalaraprisaXERxAgcLoAlarmThreshold	read-only	obsolete	Indicates the level at which the AGC low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.13.5	ScalaraprisaXERxAgcLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the AGC low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14	NodeaprisaXERxRssiHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.1	ScalaraprisaXERxRssiHiAlarmStatus	read-only	current	The status of the RSSI High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.2	ScalaraprisaXERxRssiHiAlarmSeverity	read-only	current	The severity of the RSSI High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.3	ScalaraprisaXERxRssiHiAlarmEnabled	read-only	current	Indicates whether the RSSI High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.4	ScalaraprisaXERxRssiHiAlarmThreshold	read-only	current	Indicates the level at which the RSSI High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.14.5	ScalaraprisaXERxRssiHiAlarmClearThreshold	read-only	current	Indicates the level at which the RSSI High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15	NodeaprisaXERxRssiLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.1	ScalaraprisaXERxRssiLoAlarmStatus	read-only	current	The status of the RSSI low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.2	ScalaraprisaXERxRssiLoAlarmSeverity	read-only	current	The severity of the RSSI low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.3	ScalaraprisaXERxRssiLoAlarmEnabled	read-only	current	Indicates whether the RSSI low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.4	ScalaraprisaXERxRssiLoAlarmThreshold	read-only	current	Indicates the level at which the RSSI low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.15.5	ScalaraprisaXERxRssiLoAlarmClearThreshold	read-only	current	Indicates the level at which the RSSI low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16	NodeaprisaXERxVtuneHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.1	ScalaraprisaXERxVtuneHiAlarmStatus	read-only	obsolete	The status of the Vtune High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.2	ScalaraprisaXERxVtuneHiAlarmSeverity	read-only	obsolete	The severity of the Vtune High alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.3	ScalaraprisaXERxVtuneHiAlarmEnabled	read-only	obsolete	Indicates whether the Vtune High alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.4	ScalaraprisaXERxVtuneHiAlarmThreshold	read-only	obsolete	Indicates the level at which the Vtune High alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.16.5	ScalaraprisaXERxVtuneHiAlarmClearThreshold	read-only	obsolete	Indicates the level at which the Vtune High will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17	NodeaprisaXERxVtuneLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.1	ScalaraprisaXERxVtuneLoAlarmStatus	read-only	obsolete	The status of the Vtune low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.2	ScalaraprisaXERxVtuneLoAlarmSeverity	read-only	obsolete	The severity of the Vtune low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.3	ScalaraprisaXERxVtuneLoAlarmEnabled	read-only	obsolete	Indicates whether the Vtune low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.4	ScalaraprisaXERxVtuneLoAlarmThreshold	read-only	obsolete	Indicates the level at which the Vtune low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.17.5	ScalaraprisaXERxVtuneLoAlarmClearThreshold	read-only	obsolete	Indicates the level at which the Vtune low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18	NodeaprisaXERxEEAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.1	ScalaraprisaXERxEEAlarmStatus	read-only	current	The status of the EEPROM alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.2	ScalaraprisaXERxEEAlarmSeverity	read-only	current	The severity of the EEPROM alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.18.3	ScalaraprisaXERxEEAlarmEnabled	read-only	current	Indicates whether the EEPROM alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19	NodeaprisaXERxADCChZeroHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.1	ScalaraprisaXERxADCChZeroHiAlarmName	read-only	current	The name of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.2	ScalaraprisaXERxADCChZeroHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.3	ScalaraprisaXERxADCChZeroHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Zero voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.4	ScalaraprisaXERxADCChZeroHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Zero voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.5	ScalaraprisaXERxADCChZeroHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Zero voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.19.6	ScalaraprisaXERxADCChZeroHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Zero voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20	NodeaprisaXERxADCChZeroLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.1	ScalaraprisaXERxADCChZeroLoAlarmName	read-only	current	The name of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.2	ScalaraprisaXERxADCChZeroLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.3	ScalaraprisaXERxADCChZeroLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Zero voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.4	ScalaraprisaXERxADCChZeroLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Zero voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.5	ScalaraprisaXERxADCChZeroLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Zero voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.20.6	ScalaraprisaXERxADCChZeroLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Zero voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21	NodeaprisaXERxADCChOneHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.1	ScalaraprisaXERxADCChOneHiAlarmName	read-only	current	The name of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.2	ScalaraprisaXERxADCChOneHiAlarmStatus	read-only	current	The status of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.3	ScalaraprisaXERxADCChOneHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch One voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.4	ScalaraprisaXERxADCChOneHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch One voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.5	ScalaraprisaXERxADCChOneHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch One voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.21.6	ScalaraprisaXERxADCChOneHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch One voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22	NodeaprisaXERxADCChOneLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.1	ScalaraprisaXERxADCChOneLoAlarmName	read-only	current	The name of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.2	ScalaraprisaXERxADCChOneLoAlarmStatus	read-only	current	The status of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.3	ScalaraprisaXERxADCChOneLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch One voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.4	ScalaraprisaXERxADCChOneLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch One voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.5	ScalaraprisaXERxADCChOneLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch One voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.22.6	ScalaraprisaXERxADCChOneLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch One voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23	NodeaprisaXERxADCChTwoHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.1	ScalaraprisaXERxADCChTwoHiAlarmName	read-only	current	The name of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.2	ScalaraprisaXERxADCChTwoHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.3	ScalaraprisaXERxADCChTwoHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Two voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.4	ScalaraprisaXERxADCChTwoHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Two voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.5	ScalaraprisaXERxADCChTwoHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Two voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.23.6	ScalaraprisaXERxADCChTwoHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Two voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24	NodeaprisaXERxADCChTwoLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.1	ScalaraprisaXERxADCChTwoLoAlarmName	read-only	current	The name of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.2	ScalaraprisaXERxADCChTwoLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.3	ScalaraprisaXERxADCChTwoLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Two voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.4	ScalaraprisaXERxADCChTwoLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Two voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.5	ScalaraprisaXERxADCChTwoLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Two voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.24.6	ScalaraprisaXERxADCChTwoLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Two voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25	NodeaprisaXERxADCChThreeHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.1	ScalaraprisaXERxADCChThreeHiAlarmName	read-only	current	The name of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.2	ScalaraprisaXERxADCChThreeHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.3	ScalaraprisaXERxADCChThreeHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Three voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.4	ScalaraprisaXERxADCChThreeHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Three voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.5	ScalaraprisaXERxADCChThreeHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Three voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.25.6	ScalaraprisaXERxADCChThreeHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Three voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26	NodeaprisaXERxADCChThreeLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.1	ScalaraprisaXERxADCChThreeLoAlarmName	read-only	current	The name of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.2	ScalaraprisaXERxADCChThreeLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.3	ScalaraprisaXERxADCChThreeLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Three voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.4	ScalaraprisaXERxADCChThreeLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Three voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.5	ScalaraprisaXERxADCChThreeLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Three voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.26.6	ScalaraprisaXERxADCChThreeLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Three voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27	NodeaprisaXERxADCChFourHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.1	ScalaraprisaXERxADCChFourHiAlarmName	read-only	current	The name of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.2	ScalaraprisaXERxADCChFourHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.3	ScalaraprisaXERxADCChFourHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Four voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.4	ScalaraprisaXERxADCChFourHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Four voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.5	ScalaraprisaXERxADCChFourHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Four voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.27.6	ScalaraprisaXERxADCChFourHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Four voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28	NodeaprisaXERxADCChFourLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.1	ScalaraprisaXERxADCChFourLoAlarmName	read-only	current	The name of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.2	ScalaraprisaXERxADCChFourLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.3	ScalaraprisaXERxADCChFourLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Four voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.4	ScalaraprisaXERxADCChFourLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Four voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.5	ScalaraprisaXERxADCChFourLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Four voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.28.6	ScalaraprisaXERxADCChFourLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Four voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29	NodeaprisaXERxADCChFiveHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.1	ScalaraprisaXERxADCChFiveHiAlarmName	read-only	current	The name of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.2	ScalaraprisaXERxADCChFiveHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.3	ScalaraprisaXERxADCChFiveHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Five voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.4	ScalaraprisaXERxADCChFiveHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Five voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.5	ScalaraprisaXERxADCChFiveHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Five voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.29.6	ScalaraprisaXERxADCChFiveHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Five voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30	NodeaprisaXERxADCChFiveLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.1	ScalaraprisaXERxADCChFiveLoAlarmName	read-only	current	The name of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.2	ScalaraprisaXERxADCChFiveLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.3	ScalaraprisaXERxADCChFiveLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Five voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.4	ScalaraprisaXERxADCChFiveLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Five voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.5	ScalaraprisaXERxADCChFiveLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Five voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.30.6	ScalaraprisaXERxADCChFiveLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Five voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31	NodeaprisaXERxADCChSixHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.1	ScalaraprisaXERxADCChSixHiAlarmName	read-only	current	The name of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.2	ScalaraprisaXERxADCChSixHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.3	ScalaraprisaXERxADCChSixHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Six voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.4	ScalaraprisaXERxADCChSixHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Six voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.5	ScalaraprisaXERxADCChSixHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Six voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.31.6	ScalaraprisaXERxADCChSixHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Six voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32	NodeaprisaXERxADCChSixLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.1	ScalaraprisaXERxADCChSixLoAlarmName	read-only	current	The name of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.2	ScalaraprisaXERxADCChSixLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.3	ScalaraprisaXERxADCChSixLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Six voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.4	ScalaraprisaXERxADCChSixLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Six voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.5	ScalaraprisaXERxADCChSixLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Six voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.32.6	ScalaraprisaXERxADCChSixLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Six voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33	NodeaprisaXERxADCChSevenHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.1	ScalaraprisaXERxADCChSevenHiAlarmName	read-only	current	The name of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.2	ScalaraprisaXERxADCChSevenHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.3	ScalaraprisaXERxADCChSevenHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Seven voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.4	ScalaraprisaXERxADCChSevenHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Seven voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.5	ScalaraprisaXERxADCChSevenHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Seven voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.33.6	ScalaraprisaXERxADCChSevenHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Seven voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34	NodeaprisaXERxADCChSevenLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.1	ScalaraprisaXERxADCChSevenLoAlarmName	read-only	current	The name of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.2	ScalaraprisaXERxADCChSevenLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.3	ScalaraprisaXERxADCChSevenLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Seven voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.4	ScalaraprisaXERxADCChSevenLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Seven voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.5	ScalaraprisaXERxADCChSevenLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Seven voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.34.6	ScalaraprisaXERxADCChSevenLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Seven voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35	NodeaprisaXERxADCChEightHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.1	ScalaraprisaXERxADCChEightHiAlarmName	read-only	current	The name of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.2	ScalaraprisaXERxADCChEightHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.3	ScalaraprisaXERxADCChEightHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Eight voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.4	ScalaraprisaXERxADCChEightHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Eight voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.5	ScalaraprisaXERxADCChEightHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Eight voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.35.6	ScalaraprisaXERxADCChEightHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Eight voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36	NodeaprisaXERxADCChEightLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.1	ScalaraprisaXERxADCChEightLoAlarmName	read-only	current	The name of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.2	ScalaraprisaXERxADCChEightLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.3	ScalaraprisaXERxADCChEightLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Eight voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.4	ScalaraprisaXERxADCChEightLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Eight voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.5	ScalaraprisaXERxADCChEightLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Eight voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.36.6	ScalaraprisaXERxADCChEightLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Eight voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37	NodeaprisaXERxADCChNineHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.1	ScalaraprisaXERxADCChNineHiAlarmName	read-only	current	The name of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.2	ScalaraprisaXERxADCChNineHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.3	ScalaraprisaXERxADCChNineHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Nine voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.4	ScalaraprisaXERxADCChNineHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Nine voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.5	ScalaraprisaXERxADCChNineHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Nine voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.37.6	ScalaraprisaXERxADCChNineHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Nine voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38	NodeaprisaXERxADCChNineLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.1	ScalaraprisaXERxADCChNineLoAlarmName	read-only	current	The name of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.2	ScalaraprisaXERxADCChNineLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.3	ScalaraprisaXERxADCChNineLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Nine voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.4	ScalaraprisaXERxADCChNineLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Nine voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.5	ScalaraprisaXERxADCChNineLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Nine voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.38.6	ScalaraprisaXERxADCChNineLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Nine voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39	NodeaprisaXERxADCChTenHiAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.1	ScalaraprisaXERxADCChTenHiAlarmName	read-only	current	The name of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.2	ScalaraprisaXERxADCChTenHiAlarmStatus	read-only	current	The status of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.3	ScalaraprisaXERxADCChTenHiAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Ten voltage too high alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.4	ScalaraprisaXERxADCChTenHiAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Ten voltage too high alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.5	ScalaraprisaXERxADCChTenHiAlarmThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Ten voltage too high alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.39.6	ScalaraprisaXERxADCChTenHiAlarmClearThreshold	read-only	current	Indicates the level at which the receiver ADC Ch Ten voltage too high will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40	NodeaprisaXERxADCChTenLoAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.1	ScalaraprisaXERxADCChTenLoAlarmName	read-only	current	The name of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.2	ScalaraprisaXERxADCChTenLoAlarmStatus	read-only	current	The status of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.3	ScalaraprisaXERxADCChTenLoAlarmSeverity	read-only	current	The severity of the receiver ADC Ch Ten voltage too low alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.4	ScalaraprisaXERxADCChTenLoAlarmEnabled	read-only	current	Indicates whether the receiver ADC Ch Ten voltage too low alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.5	ScalaraprisaXERxADCChTenLoAlarmThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Ten voltage too low alarm will be set.
1.3.6.1.4.1.14817.7.3.1.2.86.6.40.6	ScalaraprisaXERxADCChTenLoAlarmClearThreshold	read-only	current	Indicates the level at wLoch the receiver ADC Ch Ten voltage too low will be cleared.
1.3.6.1.4.1.14817.7.3.1.2.86.10	NodeaprisaXEModemAlarms
1.3.6.1.4.1.14817.7.3.1.2.86.10.1	NodeaprisaXEModemSyncAlarm
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.1	ScalaraprisaXEModemSyncAlarmStatus	read-only	current	The status of the loss of modem sync alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.2	ScalaraprisaXEModemSyncAlarmSeverity	read-only	current	The severity of the loss of modem sync alarm.
1.3.6.1.4.1.14817.7.3.1.2.86.10.1.3	ScalaraprisaXEModemSyncAlarmEnabled	read-only	current	Indicates whether the loss of modem sync alarm is enabled.
1.3.6.1.4.1.14817.7.3.1.2.87	TableaprisaXEQuadJetBoardTable	not-accessible	current	Table of Quad E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.87.1	RowaprisaXEQuadJetBoardEntry	not-accessible	current	Quad E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.87.1.1	ColumnaprisaXEQuadJetBoardTableIndex	read-only	current	Quad E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.88	TableaprisaXEQuadJetPortTable	not-accessible	current	Table based on slot and port of QuadJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.88.1	RowaprisaXEQuadJetPortEntry	not-accessible	current	Quad E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.88.1.1	ColumnaprisaXEQuadJetPortTableSlot	read-only	current	Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.88.1.2	ColumnaprisaXEQuadJetPortTablePort	read-only	current	Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.88.1.3	ColumnaprisaXEQuadJetLOFAlarmStatus	read-only	current	Red alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.4	ColumnaprisaXEQuadJetLOFAlarmSeverity	read-only	current	Red alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.5	ColumnaprisaXEQuadJetLOFAlarmEnabled	read-only	current	Red alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.6	ColumnaprisaXEQuadJetAISAlarmStatus	read-only	current	AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.7	ColumnaprisaXEQuadJetAISAlarmSeverity	read-only	current	AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.8	ColumnaprisaXEQuadJetAISAlarmEnabled	read-only	current	AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.9	ColumnaprisaXEQuadJetRAIAlarmStatus	read-only	current	RAI alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.10	ColumnaprisaXEQuadJetRAIAlarmSeverity	read-only	current	RAI alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.11	ColumnaprisaXEQuadJetRAIAlarmEnabled	read-only	current	RAI alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.12	ColumnaprisaXEQuadJetRMAIAlarmStatus	read-only	current	RMAI alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.13	ColumnaprisaXEQuadJetRMAIAlarmSeverity	read-only	current	RMAI alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.14	ColumnaprisaXEQuadJetRMAIAlarmEnabled	read-only	current	RMAI alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.15	ColumnaprisaXEQuadJetTS16AISAlarmStatus	read-only	current	TS16 AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.16	ColumnaprisaXEQuadJetTS16AISAlarmSeverity	read-only	current	TS16 AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.17	ColumnaprisaXEQuadJetTS16AISAlarmEnabled	read-only	current	TS16 AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.18	ColumnaprisaXEQuadJetTS16LOSAlarmStatus	read-only	current	TS16 LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.19	ColumnaprisaXEQuadJetTS16LOSAlarmSeverity	read-only	current	TS16 LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.20	ColumnaprisaXEQuadJetTS16LOSAlarmEnabled	read-only	current	TS16 LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.21	ColumnaprisaXEQuadJetLOSAlarmStatus	read-only	current	LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.22	ColumnaprisaXEQuadJetLOSAlarmSeverity	read-only	current	LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.23	ColumnaprisaXEQuadJetLOSAlarmEnabled	read-only	current	LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.24	ColumnaprisaXEQuadJetCRC4AlarmStatus	read-only	current	CRC4 alarm status.
1.3.6.1.4.1.14817.7.3.1.2.88.1.25	ColumnaprisaXEQuadJetCRC4AlarmSeverity	read-only	current	CRC4 alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.88.1.26	ColumnaprisaXEQuadJetCRC4AlarmEnabled	read-only	current	CRC4 alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.88.1.27	ColumnaprisaXEQuadJetCRC4AlarmThreshold	read-only	current	CRC4 Threshold value for counter to alarm at.
1.3.6.1.4.1.14817.7.3.1.2.88.1.28	ColumnaprisaXEQuadJetCRC4AlarmClearThreshold	read-only	current	CRC4 Threshold at which alarm clears.
1.3.6.1.4.1.14817.7.3.1.2.90	TableaprisaXEQuadJetIFConfigTable	not-accessible	current	Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.90.1	RowaprisaXEQuadJetIFConfigEntry	not-accessible	current	Quad JET config data.
1.3.6.1.4.1.14817.7.3.1.2.90.1.1	ColumnaprisaXEQuadJetIFConfigSlotIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.90.1.2	ColumnaprisaXEQuadJetIFConfigPortIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.90.1.3	ColumnaprisaXEQuadJetTrafficType	read-write	current	Controls the traffic type on a Quad JET port.
1.3.6.1.4.1.14817.7.3.1.2.90.1.4	ColumnaprisaXEQuadJetLoopback	read-write	obsolete	Controls the traffic loopback on a Quad JET port.
1.3.6.1.4.1.14817.7.3.1.2.90.1.5	ColumnaprisaXEQuadJetLineEncoding	read-write	current	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.90.1.6	ColumnaprisaXEQuadJetPcmMode	read-write	current	Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.90.1.7	ColumnaprisaXEQuadJetClockSource	read-write	current	Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.90.1.8	ColumnaprisaXEQuadJetLineRadioLoopback	read-write	current	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.90.1.9	ColumnaprisaXEQuadJetTxWaveFormShaper	read-write	current	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.90.1.10	ColumnaprisaXEQuadJetMultiframeEnable	read-write	current	Indicates whether support is enabled for transport of T1 SF and ESF multiframe sync for a port.
1.3.6.1.4.1.14817.7.3.1.2.91	TableaprisaXEQuadJetIFConnectionTable	not-accessible	current	Interface connection table which holds all the cross connect information for the E1 card.
1.3.6.1.4.1.14817.7.3.1.2.91.1	RowaprisaXEQuadJetIFConnectionTableEntry	not-accessible	current	Quad JET cross connection data.
1.3.6.1.4.1.14817.7.3.1.2.91.1.1	ColumnaprisaXEQuadJetIFConnectionID	read-only	current	Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.91.1.2	ColumnaprisaXEQuadJetIFConnectionAggregateID	read-only	current	Aggregate ID, 0 if an unframed connection.
1.3.6.1.4.1.14817.7.3.1.2.91.1.3	ColumnaprisaXEQuadJetIFConnectionSlot	read-only	current	Slot number that this card is in.
1.3.6.1.4.1.14817.7.3.1.2.91.1.4	ColumnaprisaXEQuadJetIFConnectionE1Port	read-only	current	Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.91.1.5	ColumnaprisaXEQuadJetIFConnectionType	read-only	current	Indicates whether the connection is for data or CAS signalling.
1.3.6.1.4.1.14817.7.3.1.2.93	NodeaprisaXEQuadJetIFConnectionControl
1.3.6.1.4.1.14817.7.3.1.2.93.1	ScalaraprisaXEQuadJetIFControlConnectionID	read-write	current	Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.93.2	ScalaraprisaXEQuadJetIFControlAggregateID	read-write	current	Aggregate Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.93.3	ScalaraprisaXEQuadJetIFConnectionControlSlot	read-write	current	Slot number that this card is in.
1.3.6.1.4.1.14817.7.3.1.2.93.4	ScalaraprisaXEQuadJetIFConnectionControlE1Port	read-write	current	Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.93.5	ScalaraprisaXEQuadJetIFConnectionControlType	read-write	current	Indicates whether the connection is for data or CAS signalling.
1.3.6.1.4.1.14817.7.3.1.2.93.6	ScalaraprisaXEQuadJetIFConnectionControlCommand	read-write	current	Command to send to act upon the rows in the QuedJet Interface Connection table.
1.3.6.1.4.1.14817.7.3.1.2.95	NodeaprisaXEEthernetConfiguration
1.3.6.1.4.1.14817.7.3.1.2.95.1	ScalaraprisaXEEthernetBandwidth	read-write	current	This controls the bandwidth allocated to ethernet in kbps, the minimum block is 8kbps, values will be rounded up to the nearest 8kbps.
1.3.6.1.4.1.14817.7.3.1.2.95.2	ScalaraprisaXEEthernetManagementBandwidth	read-write	current	This controls the bandwidth available to management traffic, a minimum of 8kbps is required. Values will be rounded up to the nearest 8kbps.
1.3.6.1.4.1.14817.7.3.1.2.95.3	ScalaraprisaXEEthernetCustomerConnectionID	read-write	current	Backplane connection ID for Customer bandwidth.
1.3.6.1.4.1.14817.7.3.1.2.95.4	ScalaraprisaXEEthernetPBCConnectionID	read-write	current	Backplane connection ID for Private Back Channel management bandwidth.
1.3.6.1.4.1.14817.7.3.1.2.96	TableaprisaXEEthernetPortTable	not-accessible	current	Table used to control and monitor basic ethernet features on the 4-port hub.
1.3.6.1.4.1.14817.7.3.1.2.96.1	RowaprisaXEEthernetPortEntry	not-accessible	current	Ethernet port status and configuration.
1.3.6.1.4.1.14817.7.3.1.2.96.1.1	ColumnaprisaXEEthernetPortIndex	read-only	current	The port index, there are four ports on the hub.
1.3.6.1.4.1.14817.7.3.1.2.96.1.2	ColumnaprisaXEEthernetAutonegotiationStatus	read-only	current	The status of the port auto-negotiation.
1.3.6.1.4.1.14817.7.3.1.2.96.1.3	ColumnaprisaXEEthernetRemoteFaultStatus	read-only	current	The status of the port remote fault detection.
1.3.6.1.4.1.14817.7.3.1.2.96.1.4	ColumnaprisaXEEthernetLinkStatus	read-only	current	The status of the port link.
1.3.6.1.4.1.14817.7.3.1.2.96.1.5	ColumnaprisaXEEthernetJabberStatus	read-only	current	Has jabber been detected on the port?.
1.3.6.1.4.1.14817.7.3.1.2.96.1.6	ColumnaprisaXEEthernetSpeed	read-only	current	The current port speed, 10 or 100 Mbps.
1.3.6.1.4.1.14817.7.3.1.2.96.1.7	ColumnaprisaXEEthernetDuplexMode	read-only	current	The current port duplex mode.
1.3.6.1.4.1.14817.7.3.1.2.97	TableaprisaXEEthernetTable	not-accessible	current	Table used to display and configure Ethernet settings.
1.3.6.1.4.1.14817.7.3.1.2.97.1	RowaprisaXEEthernetTableEntry	not-accessible	current	Individual Ethernet port settings.
1.3.6.1.4.1.14817.7.3.1.2.97.1.1	ColumnaprisaXEEthernetPortNum	read-only	current	The port number, there are four ports on the hub.
1.3.6.1.4.1.14817.7.3.1.2.97.1.2	ColumnaprisaXEEthernetGroup	read-write	current	The Ethernet Group of which this port is a member.
1.3.6.1.4.1.14817.7.3.1.2.97.1.3	ColumnaprisaXEEthernetIngressRate	read-write	current	The ingress frame rate limit for this port.
1.3.6.1.4.1.14817.7.3.1.2.97.1.4	ColumnaprisaXEEthernetPortPriority	read-write	current	Indicates the bandwidth allocated to this port.
1.3.6.1.4.1.14817.7.3.1.2.98	NodeaprisaXEEthernetVlanQosSettings
1.3.6.1.4.1.14817.7.3.1.2.98.1	ScalaraprisaXEEthernetGrouping	read-write	current	Indicates whether Ethernet grouping (VLANs) is enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.98.2	ScalaraprisaXEEthernetManagementGroup	read-only	current	The Ethernet Group for management.
1.3.6.1.4.1.14817.7.3.1.2.98.3	ScalaraprisaXEEthernetPrioQueueScheduling	read-write	current	Indicates Ethernet priority queue scheduling scheme (either strict or weighted).
1.3.6.1.4.1.14817.7.3.1.2.98.4	ScalaraprisaXEEthernetPrioQueueMapping	read-write	current	Indicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco).
1.3.6.1.4.1.14817.7.3.1.2.98.5	ScalaraprisaXEDefaultEthernetGrouping	read-write	current	Indicates when Ethernet Grouping settings must be reset to default values.
1.3.6.1.4.1.14817.7.3.1.2.98.6	ScalaraprisaXEDefaultEthernetQos	read-write	current	Indicates when Ethernet Grouping settings must be reset to default values.
1.3.6.1.4.1.14817.7.3.1.2.100	TableaprisaXEInterfaceTable	not-accessible	current	Table used to monitor the current interface status.
1.3.6.1.4.1.14817.7.3.1.2.100.1	RowaprisaXEInterfaceTableEntry	not-accessible	current	Interface bandwidth and status.
1.3.6.1.4.1.14817.7.3.1.2.100.1.1	ColumnaprisaXEInterfaceIndex	read-only	current	The slot containing the interface card, slots 0 to 8 (AUX or A-H) inclusive may contain interface cards.
1.3.6.1.4.1.14817.7.3.1.2.100.1.2	ColumnaprisaXEInterfaceType	read-only	current	Indicates the type of interface card.
1.3.6.1.4.1.14817.7.3.1.2.100.1.3	ColumnaprisaXEInterfaceAlarmStatus	read-only	current	Indicates the current alarm status for the interface.
1.3.6.1.4.1.14817.7.3.1.2.100.1.4	ColumnaprisaXEInterfacePort1Bandwidth	read-only	current	Indicates the bandwidth allocated to port 1.
1.3.6.1.4.1.14817.7.3.1.2.100.1.5	ColumnaprisaXEInterfacePort2Bandwidth	read-only	current	Indicates the bandwidth allocated to port 2.
1.3.6.1.4.1.14817.7.3.1.2.100.1.6	ColumnaprisaXEInterfacePort3Bandwidth	read-only	current	Indicates the bandwidth allocated to port 3.
1.3.6.1.4.1.14817.7.3.1.2.100.1.7	ColumnaprisaXEInterfacePort4Bandwidth	read-only	current	Indicates the bandwidth allocated to port 4.
1.3.6.1.4.1.14817.7.3.1.2.110	TableaprisaXE4WirePortControlTable	not-accessible	current	Status and Control table for 4Wire.
1.3.6.1.4.1.14817.7.3.1.2.110.1	RowaprisaXE4WirePortControlTableEntry	not-accessible	current	Entries for 4wire table.
1.3.6.1.4.1.14817.7.3.1.2.110.1.1	ColumnaprisaXE4WireConnectionID	read-write	current	Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.110.1.2	ColumnaprisaXE4WireSlotIndex	read-only	current	Slot index for 4wire Status Control table.
1.3.6.1.4.1.14817.7.3.1.2.110.1.3	ColumnaprisaXE4WirePortIndex	read-only	current	Channel index for 4 Wire Control Status table.
1.3.6.1.4.1.14817.7.3.1.2.110.1.4	ColumnaprisaXE4WireLoopback	read-write	current	Loopback control on or off for channels.
1.3.6.1.4.1.14817.7.3.1.2.110.1.5	ColumnaprisaXE4WireAdpcmCompression	read-write	current	ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.110.1.6	ColumnaprisaXE4WireRxGain	read-write	obsolete	Rx gain +4 dB to -14 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.7	ColumnaprisaXE4WireTxGain	read-write	obsolete	Tx gain +14 dB to -4 dB in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.8	ColumnaprisaXE4WireEInvert	read-write	current	Controls E on each channel for NORMAL or INVERT polarity.
1.3.6.1.4.1.14817.7.3.1.2.110.1.9	ColumnaprisaXE4WireMInvert	read-write	current	Controls M on each channel for NORMAL or INVERT polarity.
1.3.6.1.4.1.14817.7.3.1.2.110.1.10	ColumnaprisaXE4WireSignalling	read-write	current	Enables or disables E&M signalling for the port.
1.3.6.1.4.1.14817.7.3.1.2.110.1.11	ColumnaprisaXE4WireSignallingConnectionID	read-write	current	Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.110.1.12	ColumnaprisaXE4WireInputLevel	read-write	current	Input Level -14.0 dBr to +4.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.110.1.13	ColumnaprisaXE4WireOutputLevel	read-write	current	Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.121	TableaprisaXE4WireStatusControlTable	not-accessible	current	Overall card control and status.
1.3.6.1.4.1.14817.7.3.1.2.121.1	RowaprisaXE4WireStatusControlTableEntry	not-accessible	current	Status control entries.
1.3.6.1.4.1.14817.7.3.1.2.121.1.1	ColumnaprisaXE4WireStatusControlSlotIndex	read-only	current	Index for table.
1.3.6.1.4.1.14817.7.3.1.2.121.1.2	ColumnaprisaXE4WirePcmLaw	read-write	current	Sets A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.130	TableaprisaXEFXOPortControlTable	not-accessible	current	Port Control table for FXO.
1.3.6.1.4.1.14817.7.3.1.2.130.1	RowaprisaXEFXOPortControlTableEntry	not-accessible	current	Entries for FXO table.
1.3.6.1.4.1.14817.7.3.1.2.130.1.1	ColumnaprisaXEFXOPortControlSlotIndex	read-only	current	Slot index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.130.1.2	ColumnaprisaXEFXOPortIndex	read-only	current	Port index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.130.1.3	ColumnaprisaXEFXOLoopback	read-write	current	Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.130.1.4	ColumnaprisaXEFXOAdpcmCompression	read-write	current	ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.130.1.5	ColumnaprisaXEFXORxGain	read-write	obsolete	Rx gain -10 dB to 10 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.6	ColumnaprisaXEFXOTxGain	read-write	obsolete	Tx gain -10 dB to 10 dB in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.7	ColumnaprisaXEFXOConnectionID	read-write	current	Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.130.1.8	ColumnaprisaXEFXOSignallingConnectionID	read-write	current	Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.130.1.9	ColumnaprisaXEFXOInputLevel	read-write	current	Input Level -10.0 dBr to +1.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.130.1.10	ColumnaprisaXEFXOOutputLevel	read-write	current	Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.140	TableaprisaXEFXOControlTable	not-accessible	current	Control table for FXO.
1.3.6.1.4.1.14817.7.3.1.2.140.1	RowaprisaXEFXOControlTableEntry	not-accessible	current	Entries for FXO table.
1.3.6.1.4.1.14817.7.3.1.2.140.1.1	ColumnaprisaXEFXOControlSlotIndex	read-only	current	Slot index for FXO Control table.
1.3.6.1.4.1.14817.7.3.1.2.140.1.2	ColumnaprisaXEFXOSPMBandwidth	read-write	current	Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.
1.3.6.1.4.1.14817.7.3.1.2.140.1.3	ColumnaprisaXEFXOSPMFrequency	read-write	current	Set the spm detector frequency to 12kHz or 16kHz.
1.3.6.1.4.1.14817.7.3.1.2.140.1.4	ColumnaprisaXEFXOSPMLevel	read-write	current	Set the spm detector level 0 to 27 dB.
1.3.6.1.4.1.14817.7.3.1.2.140.1.5	ColumnaprisaXEFXOCasMode	read-write	current	Set the CAS mode to XE,SE or 4Wire compatible.
1.3.6.1.4.1.14817.7.3.1.2.140.1.6	ColumnaprisaXEFXOCasSignal	read-write	obsolete	Set the CAS signal to normal or invert.
1.3.6.1.4.1.14817.7.3.1.2.140.1.7	ColumnaprisaXEFXOPCMLaw	read-write	current	Set the PCM law to A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.140.1.8	ColumnaprisaXEFXOOnHookSpeed	read-write	current	Set the on hook speed to fast, medium or slow.
1.3.6.1.4.1.14817.7.3.1.2.140.1.9	ColumnaprisaXEFXORingerImpedance	read-write	current	Set the ringer impedance to high or synthesized.
1.3.6.1.4.1.14817.7.3.1.2.140.1.10	ColumnaprisaXEFXORingerThreshold	read-write	current	Set the ringer threshold to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.11	ColumnaprisaXEFXOLoopCurrentLimit	read-write	current	Set the loop current limiter to off or on.
1.3.6.1.4.1.14817.7.3.1.2.140.1.12	ColumnaprisaXEFXOMinLoopCurrent	read-write	current	Set the min loop current to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.13	ColumnaprisaXEFXOTipRingVoltage	read-write	current	Set the tip ring voltage to low, medium or high.
1.3.6.1.4.1.14817.7.3.1.2.140.1.14	ColumnaprisaXEFXOLineImpedance	read-write	current	Set the line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms \|\| 120 nF), TBR21 - 270 Ohms + (750 Ohms \|\| 1…
1.3.6.1.4.1.14817.7.3.1.2.140.1.15	ColumnaprisaXEFXOLineReversal	read-write	obsolete	Set the line reversal on/off.
1.3.6.1.4.1.14817.7.3.1.2.140.1.16	ColumnaprisaXEFXOABitFault	read-write	current	Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.17	ColumnaprisaXEFXOBBitRing	read-write	current	Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.18	ColumnaprisaXEFXOCBitBilling	read-write	current	Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.19	ColumnaprisaXEFXODBitReversals	read-write	current	Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.140.1.20	ColumnaprisaXEFXOEchoCanceller	read-write	current	Set the echo canceller to off, on or auto. The reserved values are for internal use only and cannot be set via SNMP.
1.3.6.1.4.1.14817.7.3.1.2.140.1.21	ColumnaprisaXEFXOABitOffHook	read-write	current	Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.150	TableaprisaXEBackplaneConnectionTable	not-accessible	current	Table of AprisaXE Cross connections.
1.3.6.1.4.1.14817.7.3.1.2.150.1	RowaprisaXEBackplaneConnectionTableEntry	not-accessible	current	Table entries define a circuit carried ove a TDM bus.
1.3.6.1.4.1.14817.7.3.1.2.150.1.1	ColumnaprisaXEBackplaneConnectionID	read-write	current	Handle to associate circuits with backplane connections.
1.3.6.1.4.1.14817.7.3.1.2.150.1.2	ColumnaprisaXEBackplaneTdmBus	read-write	current	TDM Bus to switch: busA - busD.
1.3.6.1.4.1.14817.7.3.1.2.150.1.3	ColumnaprisaXEBackplaneStartBitPos	read-write	current	Start bit position on the associated TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.150.1.4	ColumnaprisaXEBackplaneLength	read-write	current	Number of bits to place on the backplane TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.150.1.5	ColumnaprisaXEBackplaneInterface	read-write	current	The type of circuit this backplane connection is carrying.
1.3.6.1.4.1.14817.7.3.1.2.160	TableaprisaXEAggregateConnectionTable	not-accessible	current	Table of Aggregated backplane connections used for interfaces with further cross-connection capability.
1.3.6.1.4.1.14817.7.3.1.2.160.1	RowaprisaXEAggregateConnectionTableEntry	not-accessible	current
1.3.6.1.4.1.14817.7.3.1.2.160.1.1	ColumnaprisaXEAggregateBackplaneID	read-only	current	Backplane Connection identifier.
1.3.6.1.4.1.14817.7.3.1.2.160.1.2	ColumnaprisaXEAggregateInterfaceID	read-only	current
1.3.6.1.4.1.14817.7.3.1.2.160.1.3	ColumnaprisaXEAggregateStartBitPos	read-only	current	Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.160.1.4	ColumnaprisaXEAggregateLength	read-only	current	Number of bits required for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.160.1.5	ColumnaprisaXEAggregateOffset	read-only	current	Offset into the aggregate connection where this interface connection is placed.
1.3.6.1.4.1.14817.7.3.1.2.160.1.6	ColumnaprisaXEAggregateE1Port	read-only	current	Port number associated with this connection.
1.3.6.1.4.1.14817.7.3.1.2.170	NodeaprisaXEAggregateControl
1.3.6.1.4.1.14817.7.3.1.2.170.1	ScalaraprisaXEAggregateControlBackplaneID	read-write	current	The backplane ID to add or delete.
1.3.6.1.4.1.14817.7.3.1.2.170.2	ScalaraprisaXEAggregateControlInterfaceID	read-write	current	Aggregate connection identifier.
1.3.6.1.4.1.14817.7.3.1.2.170.3	ScalaraprisaXEAggregateControlStartBitPos	read-write	current	Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.170.4	ScalaraprisaXEAggregateControlLength	read-write	current	Number of bits required for this interface connection.
1.3.6.1.4.1.14817.7.3.1.2.170.5	ScalaraprisaXEAggregateControlOffset	read-write	current	Offset into the aggregate connection where this interface connection is placed.
1.3.6.1.4.1.14817.7.3.1.2.170.6	ScalaraprisaXEAggregateControlCommand	read-write	current	Command to send to act upon the rows in the Aggregate Connection table.
1.3.6.1.4.1.14817.7.3.1.2.180	NodeaprisaXEBackplaneControl
1.3.6.1.4.1.14817.7.3.1.2.180.1	ScalaraprisaXEBackplaneControlConnectionID	read-write	current	The Backplane Connection ID to add or delete.
1.3.6.1.4.1.14817.7.3.1.2.180.2	ScalaraprisaXEBackplaneControlTdmBus	read-write	current	TDM Bus to switch: busA - busD.
1.3.6.1.4.1.14817.7.3.1.2.180.3	ScalaraprisaXEBackplaneControlStartBitPos	read-write	current	Start bit position on the associated TDM bus (0 - 2047).
1.3.6.1.4.1.14817.7.3.1.2.180.4	ScalaraprisaXEBackplaneControlLength	read-write	current	Number of bits to place on the backplane TDM bus (0 - 2048).
1.3.6.1.4.1.14817.7.3.1.2.180.5	ScalaraprisaXEBackplaneControlInterface	read-write	current	The type of circuit this backplane connection is carrying.
1.3.6.1.4.1.14817.7.3.1.2.180.6	ScalaraprisaXEBackplaneControlCommand	read-write	current	Command to send to act upon rows in the Backplane Connection table.
1.3.6.1.4.1.14817.7.3.1.2.190	TableaprisaXEFXSPortControlTable	not-accessible	current	Port Control table for FXS.
1.3.6.1.4.1.14817.7.3.1.2.190.1	RowaprisaXEFXSPortControlTableEntry	not-accessible	current	Entries for FXS table.
1.3.6.1.4.1.14817.7.3.1.2.190.1.1	ColumnaprisaXEFXSPortControlSlotIndex	read-only	current	Slot index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.190.1.2	ColumnaprisaXEFXSPortIndex	read-only	current	Port index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.190.1.3	ColumnaprisaXEFXSLoopback	read-write	current	Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.190.1.4	ColumnaprisaXEFXSAdpcmCompression	read-write	current	ADPCM compression 16, 24, 32, 64 kbps or none.
1.3.6.1.4.1.14817.7.3.1.2.190.1.5	ColumnaprisaXEFXSRxGain	read-write	obsolete	Rx gain -9.5 dB to +3 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.6	ColumnaprisaXEFXSTxGain	read-write	obsolete	Tx gain -3 dB to 9.5 dB in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.7	ColumnaprisaXEFXSConnectionID	read-write	current	Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.190.1.8	ColumnaprisaXEFXSSignallingConnectionID	read-write	current	Associated signalling cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.190.1.9	ColumnaprisaXEFXSInputLevel	read-write	current	Input Level -9.0 dBr to +3.0 dBr in half dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.10	ColumnaprisaXEFXSOutputLevel	read-write	current	Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps.
1.3.6.1.4.1.14817.7.3.1.2.190.1.11	ColumnaprisaXEFXSPathMute	read-write	current	Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx.
1.3.6.1.4.1.14817.7.3.1.2.195	TableaprisaXEFXSControlTable	not-accessible	current	Control table for FXS.
1.3.6.1.4.1.14817.7.3.1.2.195.1	RowaprisaXEFXSControlTableEntry	not-accessible	current	Entries for FXS table.
1.3.6.1.4.1.14817.7.3.1.2.195.1.1	ColumnaprisaXEFXSControlSlotIndex	read-only	current	Slot index for FXS Control table.
1.3.6.1.4.1.14817.7.3.1.2.195.1.2	ColumnaprisaXEFXSPCMLaw	read-write	current	Set the PCM law to A-law or u-law.
1.3.6.1.4.1.14817.7.3.1.2.195.1.3	ColumnaprisaXEFXSEchoCanceller	read-write	current	Set the echo canceller to on or off.
1.3.6.1.4.1.14817.7.3.1.2.195.1.4	ColumnaprisaXEFXSBillingToneFrequency	read-write	current	Set the billing tone generator frequency to 12kHz or 16kHz.
1.3.6.1.4.1.14817.7.3.1.2.195.1.5	ColumnaprisaXEFXSBillingToneAmplitude	read-write	current	Set the billing tone generator amplitude to 400mV, 300mV, 250mV, 200mV, 150mV, 100mV or 50mV. Note, that software release 7.3.x only supports 400mV, 300mV, 200…
1.3.6.1.4.1.14817.7.3.1.2.195.1.6	ColumnaprisaXEFXSBillingToneDecay	read-write	current	Set the billing tone generator attack decay ramp to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms.
1.3.6.1.4.1.14817.7.3.1.2.195.1.7	ColumnaprisaXEFXSRingerFrequency	read-write	current	Set the ringer frequency to 17Hz, 25Hz or 50Hz.
1.3.6.1.4.1.14817.7.3.1.2.195.1.8	ColumnaprisaXEFXSRingerAmplitude	read-write	current	Set the ringer amplitude to 40 V RMS, 45 V RMS, 50 V RMS, 55 V RMS or 60 V RMS.
1.3.6.1.4.1.14817.7.3.1.2.195.1.9	ColumnaprisaXEFXSLineImpedance	read-write	current	Set the subscriber line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms \|\| 120 nF), TBR21 - 270 Ohms + (75…
1.3.6.1.4.1.14817.7.3.1.2.195.1.10	ColumnaprisaXEFXSCasMode	read-write	current	Set the CAS mode to XE,SE or 4Wire compatible.
1.3.6.1.4.1.14817.7.3.1.2.195.1.11	ColumnaprisaXEFXSCasSignal	read-write	obsolete	Set the CAS signal to normal or invert.
1.3.6.1.4.1.14817.7.3.1.2.195.1.12	ColumnaprisaXEFXSTransHybridBalance	read-write	current	Set the trans hybrid balance to 4.08dB, 2.5dB, 1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Off
1.3.6.1.4.1.14817.7.3.1.2.195.1.13	ColumnaprisaXEFXSLineReversal	read-write	obsolete	Set the line reversal on/off.
1.3.6.1.4.1.14817.7.3.1.2.195.1.14	ColumnaprisaXEFXSCalibrate	read-write	current	Recalibrate the card yes/no.
1.3.6.1.4.1.14817.7.3.1.2.195.1.15	ColumnaprisaXEFXSABitFault	read-write	current	Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.16	ColumnaprisaXEFXSBBitRing	read-write	current	Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.17	ColumnaprisaXEFXSCBitBilling	read-write	current	Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.18	ColumnaprisaXEFXSDBitReversals	read-write	current	Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.195.1.19	ColumnaprisaXEFXSLoopParameters	read-write	current	Set the loop parameters to 'default' or 'Telkom SA Limited'.
1.3.6.1.4.1.14817.7.3.1.2.195.1.20	ColumnaprisaXEFXSABitOffHook	read-write	current	Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.
1.3.6.1.4.1.14817.7.3.1.2.200	NodeaprisaXECrossConnectControl
1.3.6.1.4.1.14817.7.3.1.2.200.1	ScalaraprisaXECrossConnectControlCommand	read-write	current	Command to send to delete all current cross-connections or to activate a new set of cross-connections.
1.3.6.1.4.1.14817.7.3.1.2.200.2	ScalaraprisaXEMotherboardExtendedModeCapable	read-only	current	Allows the cross connect application to determine whether to stripe cross connections or not.
1.3.6.1.4.1.14817.7.3.1.2.200.3	ScalaraprisaXEEthernetActivationStatus	read-only	current	Ethernet activation status i.e activated, failed or currently busy activating.
1.3.6.1.4.1.14817.7.3.1.2.202	TableaprisaXECCActivationStatusTable	not-accessible	current	CC Activation status table.
1.3.6.1.4.1.14817.7.3.1.2.202.1	RowaprisaXECCActivationStatusTableEntry	not-accessible	current	Entries for CC Activation status table.
1.3.6.1.4.1.14817.7.3.1.2.202.1.1	ColumnaprisaXECCActivationStatusSlotIndex	read-only	current	Slot index for CC Activation Status table.
1.3.6.1.4.1.14817.7.3.1.2.202.1.2	ColumnaprisaXECCActivationStatus	read-only	current	Cross-connect activation status i.e activated, failed or currently busy activating.
1.3.6.1.4.1.14817.7.3.1.2.207	TableaprisaXEHSSControlTable	not-accessible	current	Control table for HSS.
1.3.6.1.4.1.14817.7.3.1.2.207.1	RowaprisaXEHSSControlTableEntry	not-accessible	current	Entries for HSS table.
1.3.6.1.4.1.14817.7.3.1.2.207.1.1	ColumnaprisaXEHSSControlSlotIndex	read-only	current	Slot index for HSS Control Table.
1.3.6.1.4.1.14817.7.3.1.2.207.1.2	ColumnaprisaXEHSSConnectionID	read-write	current	Backplane Connection ID for data connection.
1.3.6.1.4.1.14817.7.3.1.2.207.1.3	ColumnaprisaXEHSSSignallingID	read-write	current	Backplane connection ID for signalling/control connection.
1.3.6.1.4.1.14817.7.3.1.2.207.1.4	ColumnaprisaXEHSSEquipmentMode	read-only	current	Terminal Equipment mode, DCE or DTE, this is a direct reflection of the equipment mode based on the type of cable currently connected. The value is not defined…
1.3.6.1.4.1.14817.7.3.1.2.207.1.5	ColumnaprisaXEHSSLoopback	read-write	current	Interface loopback control.
1.3.6.1.4.1.14817.7.3.1.2.207.1.6	ColumnaprisaXEHSSNetworkClockSource	read-write	current	Controls whether the port drive the clock source or not.
1.3.6.1.4.1.14817.7.3.1.2.207.1.7	ColumnaprisaXEHSSSerialBaudRate	read-write	current	Serial Baud rate where 1 = 8kbps and 256 = 2Mbps.
1.3.6.1.4.1.14817.7.3.1.2.207.1.8	ColumnaprisaXEHSSV110BaudRate	read-write	current	V110 baud rate.
1.3.6.1.4.1.14817.7.3.1.2.207.1.9	ColumnaprisaXEHSSSendHandshakingMode	read-write	current	Select 1 of 8 RTS/CTS modes of operation.
1.3.6.1.4.1.14817.7.3.1.2.207.1.10	ColumnaprisaXEHSSDataReadyMode	read-write	current	Select 1 of 8 DSR/DTR modes.
1.3.6.1.4.1.14817.7.3.1.2.207.1.11	ColumnaprisaXEHSSCarrierDetectMode	read-write	current	Select 1 of 4 DCD modes.
1.3.6.1.4.1.14817.7.3.1.2.207.1.12	ColumnaprisaXEHSSClockSelection	read-write	current	Select the clock mode internal to the HSS traffic path.
1.3.6.1.4.1.14817.7.3.1.2.207.1.13	ColumnaprisaXEHSSXTxCEnabled	read-write	current	Select whether XTxC generation is enabled or disabled for the port. The default is enabled.
1.3.6.1.4.1.14817.7.3.1.2.207.1.14	ColumnaprisaXEHSSSerialMode	read-only	current	Indicates the type of serial interface cable is connected to the HSS port.
1.3.6.1.4.1.14817.7.3.1.2.210	TableaprisaXEV24PortControlTable	not-accessible	current	Port Control table for V24.
1.3.6.1.4.1.14817.7.3.1.2.210.1	RowaprisaXEV24PortControlTableEntry	not-accessible	current	Entries for V24 table.
1.3.6.1.4.1.14817.7.3.1.2.210.1.1	ColumnaprisaXEV24PortControlSlotIndex	read-only	current	Slot index for V24 Control table.
1.3.6.1.4.1.14817.7.3.1.2.210.1.2	ColumnaprisaXEV24PortIndex	read-only	current	Port index for V24 Control table.
1.3.6.1.4.1.14817.7.3.1.2.210.1.3	ColumnaprisaXEV24BaudRate	read-write	current	Baud Rate from 300 baud to 115200 baud.
1.3.6.1.4.1.14817.7.3.1.2.210.1.4	ColumnaprisaXEV24Loopback	read-write	current	Loopback control on or off for ports.
1.3.6.1.4.1.14817.7.3.1.2.210.1.5	ColumnaprisaXEV24DataBits	read-write	current	No of data bits used, 7 or 8.
1.3.6.1.4.1.14817.7.3.1.2.210.1.6	ColumnaprisaXEV24StopBits	read-write	current	No of stop bits used, 1 or 2.
1.3.6.1.4.1.14817.7.3.1.2.210.1.7	ColumnaprisaXEV24ParityBits	read-write	current	No of parity bits used, 0 or 1.
1.3.6.1.4.1.14817.7.3.1.2.210.1.8	ColumnaprisaXEV24ConnectionID	read-write	current	Associated cross-connect Backplane Connection ID.
1.3.6.1.4.1.14817.7.3.1.2.220	TableaprisaXEDualJetBoardTable	not-accessible	current	Table of Dual E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.220.1	RowaprisaXEDualJetBoardEntry	not-accessible	current	Dual E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.220.1.1	ColumnaprisaXEDualJetBoardTableIndex	read-only	current	Dual E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.221	TableaprisaXEDualJetPortTable	not-accessible	current	Table based on slot and port of DualJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.221.1	RowaprisaXEDualJetPortEntry	not-accessible	current	Dual E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.221.1.1	ColumnaprisaXEDualJetPortTableSlot	read-only	current	Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.221.1.2	ColumnaprisaXEDualJetPortTablePort	read-only	current	Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.221.1.3	ColumnaprisaXEDualJetAISAlarmStatus	read-only	current	AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.221.1.4	ColumnaprisaXEDualJetAISAlarmSeverity	read-only	current	AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.221.1.5	ColumnaprisaXEDualJetAISAlarmEnabled	read-only	current	AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.221.1.6	ColumnaprisaXEDualJetLOSAlarmStatus	read-only	current	LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.221.1.7	ColumnaprisaXEDualJetLOSAlarmSeverity	read-only	current	LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.221.1.8	ColumnaprisaXEDualJetLOSAlarmEnabled	read-only	current	LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.222	TableaprisaXEDualJetIFConfigTable	not-accessible	current	Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.222.1	RowaprisaXEDualJetIFConfigEntry	not-accessible	current	Dual JET config data.
1.3.6.1.4.1.14817.7.3.1.2.222.1.1	ColumnaprisaXEDualJetIFConfigSlotIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.222.1.2	ColumnaprisaXEDualJetIFConfigPortIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.222.1.3	ColumnaprisaXEDualJetTrafficType	read-write	current	Controls the traffic type on a Dual JET port.
1.3.6.1.4.1.14817.7.3.1.2.222.1.4	ColumnaprisaXEDualJetLoopback	read-write	obsolete	Controls the traffic loopback on a Dual JET port.
1.3.6.1.4.1.14817.7.3.1.2.222.1.5	ColumnaprisaXEDualJetLineEncoding	read-write	current	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.222.1.6	ColumnaprisaXEDualJetPcmMode	read-write	current	Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.222.1.7	ColumnaprisaXEDualJetClockSource	read-write	current	Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.222.1.8	ColumnaprisaXEDualJetLineRadioLoopback	read-write	current	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.222.1.9	ColumnaprisaXEDualJetTxWaveFormShaper	read-write	current	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.225	TableaprisaXESingleJetBoardTable	not-accessible	current	Table of Single E1 card specific configuration details.
1.3.6.1.4.1.14817.7.3.1.2.225.1	RowaprisaXESingleJetBoardEntry	not-accessible	current	Single E1 configuration details.
1.3.6.1.4.1.14817.7.3.1.2.225.1.1	ColumnaprisaXESingleJetBoardTableIndex	read-only	current	Single E1 board indexed by slot.
1.3.6.1.4.1.14817.7.3.1.2.226	TableaprisaXESingleJetPortTable	not-accessible	current	Table based on slot and port of SingleJet cards alarms.
1.3.6.1.4.1.14817.7.3.1.2.226.1	RowaprisaXESingleJetPortEntry	not-accessible	current	Single E1 port alarms.
1.3.6.1.4.1.14817.7.3.1.2.226.1.1	ColumnaprisaXESingleJetPortTableSlot	read-only	current	Port table index based on slot number.
1.3.6.1.4.1.14817.7.3.1.2.226.1.2	ColumnaprisaXESingleJetPortTablePort	read-only	current	Port table index based on port number.
1.3.6.1.4.1.14817.7.3.1.2.226.1.3	ColumnaprisaXESingleJetAISAlarmStatus	read-only	current	AIS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.226.1.4	ColumnaprisaXESingleJetAISAlarmSeverity	read-only	current	AIS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.226.1.5	ColumnaprisaXESingleJetAISAlarmEnabled	read-only	current	AIS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.226.1.6	ColumnaprisaXESingleJetLOSAlarmStatus	read-only	current	LOS alarm status.
1.3.6.1.4.1.14817.7.3.1.2.226.1.7	ColumnaprisaXESingleJetLOSAlarmSeverity	read-only	current	LOS alarm severity.
1.3.6.1.4.1.14817.7.3.1.2.226.1.8	ColumnaprisaXESingleJetLOSAlarmEnabled	read-only	current	LOS alarm enabled or disabled.
1.3.6.1.4.1.14817.7.3.1.2.227	TableaprisaXESingleJetIFConfigTable	not-accessible	current	Switch data table which describes the allocation of user data on to the TDM busses.
1.3.6.1.4.1.14817.7.3.1.2.227.1	RowaprisaXESingleJetIFConfigEntry	not-accessible	current	Single JET config data.
1.3.6.1.4.1.14817.7.3.1.2.227.1.1	ColumnaprisaXESingleJetIFConfigSlotIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.227.1.2	ColumnaprisaXESingleJetIFConfigPortIndex	read-only	current	Index to the port table based on port number.
1.3.6.1.4.1.14817.7.3.1.2.227.1.3	ColumnaprisaXESingleJetTrafficType	read-write	current	Controls the traffic type on a Single JET port.
1.3.6.1.4.1.14817.7.3.1.2.227.1.4	ColumnaprisaXESingleJetLoopback	read-write	obsolete	Controls the traffic loopback on a Single JET port.
1.3.6.1.4.1.14817.7.3.1.2.227.1.5	ColumnaprisaXESingleJetLineEncoding	read-write	current	Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.
1.3.6.1.4.1.14817.7.3.1.2.227.1.6	ColumnaprisaXESingleJetPcmMode	read-write	current	Controls the PCM mode, PCM31 or PCM30C.
1.3.6.1.4.1.14817.7.3.1.2.227.1.7	ColumnaprisaXESingleJetClockSource	read-write	current	Controls whether the port drives the clock soure or not.
1.3.6.1.4.1.14817.7.3.1.2.227.1.8	ColumnaprisaXESingleJetLineRadioLoopback	read-write	current	This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
1.3.6.1.4.1.14817.7.3.1.2.227.1.9	ColumnaprisaXESingleJetTxWaveFormShaper	read-write	current	This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.
1.3.6.1.4.1.14817.7.3.1.2.230	TableaprisaXEPSCControlTable	not-accessible	current	Control table for PSC.
1.3.6.1.4.1.14817.7.3.1.2.230.1	RowaprisaXEPSCControlTableEntry	not-accessible	current	Entries for PSC table.
1.3.6.1.4.1.14817.7.3.1.2.230.1.1	ColumnaprisaXEPSCControlSlotIndex	read-only	current	Slot index for PSC Control Table.
1.3.6.1.4.1.14817.7.3.1.2.230.1.2	ColumnaprisaXEPSCActiveRadio	read-write	current	Indicates the reception mode of the PSC.
1.3.6.1.4.1.14817.7.3.1.2.230.1.3	ColumnaprisaXEPSCActiveTx	read-only	current	Indicates the currently active transmitter.
1.3.6.1.4.1.14817.7.3.1.2.230.1.4	ColumnaprisaXEPSCDemodAlignmentStatusPSC	read-only	current	Status of the demodulator alignment on the PSC.
1.3.6.1.4.1.14817.7.3.1.2.230.1.5	ColumnaprisaXEPSCDemodAlignmentStatusPIC	read-only	current	Status of the demodulator alignment on the PIC.
1.3.6.1.4.1.14817.7.3.1.2.235	NodeaprisaXEHSDParameterCompare
1.3.6.1.4.1.14817.7.3.1.2.235.1	ScalaraprisaXEHSDParameterMismatch	read-only	current	If there is a parameter (OID) mismatch between Radio A and Radio B
1.3.6.1.4.1.14817.7.3.1.2.235.2	ScalaraprisaXEHSDParameterCompareChecking	read-write	current	Enables/disables HSD paramter compare checking between Radio A and Radio B
1.3.6.1.4.1.14817.7.3.1.2.300	NodeaprisaXESoftwareUpgradeControl
1.3.6.1.4.1.14817.7.3.1.2.300.1	ScalaraprisaXESoftwareUpgradeVersion	read-write	current	New software version details of the form x_y_z.
1.3.6.1.4.1.14817.7.3.1.2.300.2	ScalaraprisaXESoftwareUpgradeCommand	read-write	current	Command used to instigate a software upgrade.
1.3.6.1.4.1.14817.7.3.1.2.300.3	ScalaraprisaXESoftwareUpgradeResult	read-only	current	Status of a software upgrade, this will have to be polled to follow the upload progress.
1.3.6.1.4.1.14817.7.3.1.3	IdentityaprisaXEEvents		current	The root of the OID sub-tree for the AprisaXE product events.
1.3.6.1.4.1.14817.7.3.1.3.0	IdentityaprisaXEEventsV2		current	The AprisaXE product events, ensures SNMPv1 compatibility.
1.3.6.1.4.1.14817.7.3.1.4	IdentityaprisaXETestObjects		current	The root of the OID sub-tree for the AprisaXE test objects.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

APRISAXE-MIB-4RF