APS-R-MIB
72 objects
This is a draft adopted under RAD MIB before RFC3498 was released.
Imported Objects
| IF-MIB | InterfaceIndex |
| RAD-SMI-MIB | radExperimental |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.20.2 | IdentityapsMIBr | This is a draft adopted under RAD MIB before RFC3498 was released. | ||
| 1.3.6.1.4.1.164.20.2.1 | NodeapsMIBObjectsR | |||
| 1.3.6.1.4.1.164.20.2.1.1 | NodeapsConfigR | |||
| 1.3.6.1.4.1.164.20.2.1.1.1 | ScalarapsConfigGroupsR | read-only | current | The count of APS groups. |
| 1.3.6.1.4.1.164.20.2.1.1.2 | TableapsConfigTableR | not-accessible | current | This table lists the APS groups that have been configured on the system. |
| 1.3.6.1.4.1.164.20.2.1.1.2.1 | RowapsConfigEntryR | not-accessible | current | A conceptual row in the apsConfigTable. |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.1 | ColumnapsConfigNameR | not-accessible | current | A textual name for the APS group. |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.2 | ColumnapsConfigRowStatusR | read-write | current | The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Also, all associated … |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.3 | ColumnapsConfigModeR | read-write | current | The architecture and mode of the APS group. The values mean: onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. oneTo… |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.4 | ColumnapsConfigSdBerThresholdR | read-write | current | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.5 | ColumnapsConfigSfBerThresholdR | read-write | current | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.6 | ColumnapsConfigWaitToRestoreR | read-write | current | The Wait To Restore period in seconds. This field only applies if revertive switching is enabled, otherwise this value is ignored. After clearing of a conditio… |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.7 | ColumnapsConfigCreationTimeR | read-only | current | The value of sysUpTime at the time the associated apsConfigRowStatus instance was set to active. |
| 1.3.6.1.4.1.164.20.2.1.1.2.1.8 | ColumnapsConfigOperDelayR | read-write | current | The Wait To Operate upon event in hundreds of msec. This field only applies if revertive switching is enabled, otherwise this value is ignored. The Delay perio… |
| 1.3.6.1.4.1.164.20.2.1.2 | TableapsStatusTableR | not-accessible | current | This table provides status information about APS groups that have been configured on the system. |
| 1.3.6.1.4.1.164.20.2.1.2.1 | RowapsStatusEntryR | not-accessible | current | A conceptual row in the apsStatusTable. |
| 1.3.6.1.4.1.164.20.2.1.2.1.1 | ColumnapsStatusK1K2RcvR | read-only | current | The current value of the K1 and K2 bytes received on the protection channel. |
| 1.3.6.1.4.1.164.20.2.1.2.1.2 | ColumnapsStatusK1K2TransR | read-only | current | The current value of the K1 and K2 bytes transmitted on the protection channel. |
| 1.3.6.1.4.1.164.20.2.1.2.1.3 | ColumnapsStatusCurrentR | read-only | current | The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which indicates the architecture and K2… |
| 1.3.6.1.4.1.164.20.2.1.2.1.4 | ColumnapsStatusModeMismatchesR | read-only | current | A count of Mode Mismatch conditions. |
| 1.3.6.1.4.1.164.20.2.1.2.1.5 | ColumnapsStatusChannelMismatchesR | read-only | current | A count of Channel Mismatch conditions. |
| 1.3.6.1.4.1.164.20.2.1.2.1.6 | ColumnapsStatusPSBFsR | read-only | current | A count of Protection Switch Byte Failure conditions. This condition occurs when an invalid code or persistently unacceptable codes in the K1 byte are received. |
| 1.3.6.1.4.1.164.20.2.1.2.1.7 | ColumnapsStatusFEPLFsR | read-only | current | A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte. |
| 1.3.6.1.4.1.164.20.2.1.3 | NodeapsMapR | |||
| 1.3.6.1.4.1.164.20.2.1.3.1 | ScalarapsChanLTEsR | read-only | current | The count of available SONET LTE interfaces that may be included in APS groups. |
| 1.3.6.1.4.1.164.20.2.1.3.2 | TableapsMapTableR | not-accessible | current | This table lists the SONET LTE interfaces that may be included in APS groups. This is a list of all interfaces on the system with ifType sonet(39). |
| 1.3.6.1.4.1.164.20.2.1.3.2.1 | RowapsMapEntryR | not-accessible | current | A conceptual row in the apsMapTableR. |
| 1.3.6.1.4.1.164.20.2.1.3.2.1.1 | ColumnapsMapIfIndexR | not-accessible | current | The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). |
| 1.3.6.1.4.1.164.20.2.1.3.2.1.2 | ColumnapsMapGroupNameR | read-only | current | A textual name for the APS group which this channel is included in. If the channel is not part of an APS group this value is set to a string of size 0. |
| 1.3.6.1.4.1.164.20.2.1.3.2.1.3 | ColumnapsMapChanNumberR | read-only | current | This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. If the SONE… |
| 1.3.6.1.4.1.164.20.2.1.4 | TableapsChanConfigTableR | not-accessible | current | This table lists the APS channels that have been configured in APS groups. |
| 1.3.6.1.4.1.164.20.2.1.4.1 | RowapsChanConfigEntryR | not-accessible | current | A conceptual row in the apsChanConfigTable. |
| 1.3.6.1.4.1.164.20.2.1.4.1.1 | ColumnapsChanGroupNameR | not-accessible | current | A textual name for the APS group which this channel is included in. |
| 1.3.6.1.4.1.164.20.2.1.4.1.2 | ColumnapsChanNumberR | not-accessible | current | This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. This field … |
| 1.3.6.1.4.1.164.20.2.1.4.1.3 | ColumnapsChanRowStatusR | read-write | current | The status of this APS channel entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. A row may not be cr… |
| 1.3.6.1.4.1.164.20.2.1.4.1.4 | ColumnapsChanIfIndexR | read-write | current | The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). This must not be set to the InterfaceIndex of a SONET LTE that is curr… |
| 1.3.6.1.4.1.164.20.2.1.4.1.5 | ColumnapsChanPriorityR | read-write | current | The priority of the channel. This field deterimines whether high or low priority SD and SF codes are used in K1 requests. This field is only applicable if the … |
| 1.3.6.1.4.1.164.20.2.1.5 | TableapsCommandTableR | not-accessible | current | This table allows commands to be sent to configured APS groups. |
| 1.3.6.1.4.1.164.20.2.1.5.1 | RowapsCommandEntryR | not-accessible | current | A conceptual row in the apsCommandTable. |
| 1.3.6.1.4.1.164.20.2.1.5.1.1 | ColumnapsCommandSwitchR | read-write | current | Allows the initiation of an APS switch command on the APS group and channel specified by the index values. When read this object returns the last command writt… |
| 1.3.6.1.4.1.164.20.2.1.5.1.2 | ColumnapsCommandControlR | read-write | current | Allows the initiation of an APS control command on the APS group and channel specified by the index values. When read this object returns the last command writ… |
| 1.3.6.1.4.1.164.20.2.1.6 | TableapsChanStatusTableR | not-accessible | current | This table contains status information for all SONET LTE interfaces that are included in APS groups. |
| 1.3.6.1.4.1.164.20.2.1.6.1 | RowapsChanStatusEntryR | not-accessible | current | A conceptual row in the apsChanStatusTable. |
| 1.3.6.1.4.1.164.20.2.1.6.1.1 | ColumnapsChanStatusR | read-only | current | Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prevented from switching to the p… |
| 1.3.6.1.4.1.164.20.2.1.6.1.2 | ColumnapsChanSignalDegradesR | read-only | current | A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold. |
| 1.3.6.1.4.1.164.20.2.1.6.1.3 | ColumnapsChanSignalFailuresR | read-only | current | A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Lin… |
| 1.3.6.1.4.1.164.20.2.1.6.1.4 | ColumnapsChanSwitchoversR | read-only | current | The number of times this channel has switched to the protection line. When queried with index value apsChanNumber set to 0, which is the protection line, this … |
| 1.3.6.1.4.1.164.20.2.1.6.1.5 | ColumnapsChanLastSwitchoverR | read-only | current | The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to the protection line, or this cha… |
| 1.3.6.1.4.1.164.20.2.2 | NodeapsMIBNotificationsR | |||
| 1.3.6.1.4.1.164.20.2.2.0 | NodeapsNotificationsPrefixR | |||
| 1.3.6.1.4.1.164.20.2.2.0.1 | NotificationapsTrapSwitchoverR | current | An apsTrapSwitchover notification is sent when the value of an instance of apsChanSwitchovers increments. | |
| 1.3.6.1.4.1.164.20.2.2.0.2 | NotificationapsTrapModeMismatchR | current | An apsTrapModeMismatch notification is sent when the value of an instance of apsStatusModeMismatches increments. | |
| 1.3.6.1.4.1.164.20.2.2.0.3 | NotificationapsTrapChannelMismatchR | current | An apsTrapChannelMismatch notification is sent when the value of an instance of apsStatusChannelMismatches increments. | |
| 1.3.6.1.4.1.164.20.2.2.0.4 | NotificationapsTrapPSBFr | current | An apsTrapPSBF notification is sent when the value of an instance of apsStatusPSBFs increments. | |
| 1.3.6.1.4.1.164.20.2.2.0.5 | NotificationapsTrapFEPLFr | current | An apsTrapFEPLFs notification is sent when the value of an instance of apsStatusFEPLFs increments. | |
| 1.3.6.1.4.1.164.20.2.3 | NodeapsMIBConformanceR | |||
| 1.3.6.1.4.1.164.20.2.3.1 | NodeapsGroupsR | |||
| 1.3.6.1.4.1.164.20.2.3.1.1 | GroupapsConfigGeneralR | current | A collection of apsConfigTable objects providing configuration information applicable to all linear APS groups. | |
| 1.3.6.1.4.1.164.20.2.3.1.2 | GroupapsConfigOneToNr | current | The apsConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture. | |
| 1.3.6.1.4.1.164.20.2.3.1.3 | GroupapsCommandOnePlusOneR | current | The apsCommandTable object which is applicable to groups implementing the linear APS 1+1 architecture. Also, set operations must be supported. | |
| 1.3.6.1.4.1.164.20.2.3.1.4 | GroupapsCommandOneToNr | current | A collection of apsCommandTable objects which are applicable to groups implementing the linear APS 1:n architecture. Also, set operations must be supported. | |
| 1.3.6.1.4.1.164.20.2.3.1.5 | GroupapsStatusGeneralR | current | A collection of apsStatusTable objects providing status information applicable to all linear APS groups. | |
| 1.3.6.1.4.1.164.20.2.3.1.6 | GroupapsChanGeneralR | current | A collection of channel objects providing information applicable to all linear APS channels. | |
| 1.3.6.1.4.1.164.20.2.3.1.7 | GroupapsChanOneToNr | current | The apsChanConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture. | |
| 1.3.6.1.4.1.164.20.2.3.1.8 | GroupapsTotalsGroupR | current | A collection of objects providing optional counts of configured APS groups and SONET LTE interfaces. | |
| 1.3.6.1.4.1.164.20.2.3.1.9 | GroupapsMapGroupR | current | A collection of apsMapTable objects providing a mapping from sonet(39) InterfaceIndex to group name and channel number for assigned APS channels and a list of … | |
| 1.3.6.1.4.1.164.20.2.3.1.10 | GroupapsTrapOptionalR | current | A collection of SONET linear APS notifications that may optionally be implemented. | |
| 1.3.6.1.4.1.164.20.2.3.2 | NodeapsCompliancesR | |||
| 1.3.6.1.4.1.164.20.2.3.2.1 | ComplianceapsComplianceR | current | The compliance statement for linear APS groups. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ApsControlCommand | INTEGER { lockoutWorkingChannel(1), clearLockoutWorkingChannel(2) } | current | An APS control command applies only to LTE that support the 1:n architecture and performs the following actions. The Control command values are: lockoutWorkingChannel(1) Prevents the specified working channel from switc… |
| ApsK1K2 | OCTET STRING (SIZE (2)) | current | This Textual Convention describes an object that stores a SONET K1 and K2 byte APS protocol field. K1 is located in the first octet, K2 is located in the second octet. Bits 1-4 of the K1 byte indicate a request. 1111 Lo… |
| ApsSwitchCommand | INTEGER { clear(1), lockoutOfProtection(2), forcedSwitchWorkToProtect(3), forcedSwitchProtectToWork(4), manualSwitchWorkToProtect(5), manualSwitchProtectToWork(6), exercise(7) } | current | An APS switch command allows a user to perform protection switch actions. The Switch command values are: clear(1) Clears all of the switch commands listed below for the specified channel. lockoutOfProtection(2) Prevents… |