AQUASYSTEM-MIB
68 objects
The mib module, containing various WanFlex options.
Imported Objects
| IF-MIB | ifEntry |
| INFINET-MIB | wanflex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3942.1.1.3 | IdentityaquasystemMIB | The mib module, containing various WanFlex options. | ||
| 1.3.6.1.4.1.3942.1.1.3.1 | ScalarsysGPSXY | read-write | current | Geographical coordinates of the unit (longitude and latitude) in degrees. This parameter is used for automatic tweaking of radio module parameters. |
| 1.3.6.1.4.1.3942.1.1.3.2 | ScalarsysFastRoute | read-write | current | This value indicates whether fast routing mode is turned on or off. A router in fast routing mode effectively does not decrement the value in TTL field of IP p… |
| 1.3.6.1.4.1.3942.1.1.3.3 | ScalarsysICMPLimit | read-write | current | Sets limit on outgoing ICMP packets per second (200 by default). This feature is used to avoid unit overload when network scanners are used. When this value is… |
| 1.3.6.1.4.1.3942.1.1.3.4 | ScalarsysSendRedirects | read-write | current | This value indicates whether the system is allowed to send ICMP redirect messages. |
| 1.3.6.1.4.1.3942.1.1.3.5 | ScalarsysDropRedirects | read-write | current | This value indicates whether the system ignores incoming ICMP redirect messages. |
| 1.3.6.1.4.1.3942.1.1.3.6 | ScalarsysCpu | read-only | current | This value indicates current CPU load rate in per cent. |
| 1.3.6.1.4.1.3942.1.1.3.7 | ScalarsysTemperature | read-only | current | This value indicates current board temperature in tenth of degrees Celsius. |
| 1.3.6.1.4.1.3942.1.1.3.8 | ScalarsysTrapSequence | accessible-for-notify | current | This value indicates sequence number of the trap last sent. |
| 1.3.6.1.4.1.3942.1.1.3.9 | ScalarsysSerialNumber | read-only | current | This value indicates device's serial number. |
| 1.3.6.1.4.1.3942.1.1.3.10 | ScalarsysRestartTimer | read-write | current | This variable defines system timer counter that sets time in seconds left till device reboot. To cancel time counter set variable to '0'. |
| 1.3.6.1.4.1.3942.1.1.3.11 | ScalarsysSerialNumberStr | read-only | current | This value indicates device's serial number as character string. |
| 1.3.6.1.4.1.3942.1.1.3.12 | ScalarsysNote | read-write | current | This variable holds administrative note. |
| 1.3.6.1.4.1.3942.1.1.3.13 | ScalarsysLastRebootReason | read-only | current | This value indicates device's last reboot reason. |
| 1.3.6.1.4.1.3942.1.1.3.14 | ScalarsysSoftwareVersion | read-only | current | Dot-separated string compiled of integers for OS version, subversion and build version. |
| 1.3.6.1.4.1.3942.1.1.3.15 | ScalarsysModel | read-only | current | PN field from License. |
| 1.3.6.1.4.1.3942.1.1.3.16 | ScalarsysFirmwareID | read-only | current | system Firmware ID |
| 1.3.6.1.4.1.3942.1.1.3.17 | ScalarsysBuildDate | read-only | current | system Firmware build date |
| 1.3.6.1.4.1.3942.1.1.3.18 | ScalarsysBuildTime | read-only | current | system Firmware build time |
| 1.3.6.1.4.1.3942.1.1.3.20 | NodesysIf | |||
| 1.3.6.1.4.1.3942.1.1.3.20.1 | TablesysIfTable | not-accessible | current | This table contains additional objects for RFC2863 ifTable. |
| 1.3.6.1.4.1.3942.1.1.3.20.1.1 | RowsysIfEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.3942.1.1.3.20.1.1.1 | ColumnsysIfCurPpsRx | read-only | current | Current rate of inbound traffic on interface measured in packets per second. |
| 1.3.6.1.4.1.3942.1.1.3.20.1.1.2 | ColumnsysIfCurPpsTx | read-only | current | Current rate of outbound traffic on interface measured in packets per second. |
| 1.3.6.1.4.1.3942.1.1.3.20.1.1.3 | ColumnsysIfCurLoadRx | read-only | current | Current rate of inbound traffic on interface measured in kilobits per second. |
| 1.3.6.1.4.1.3942.1.1.3.20.1.1.4 | ColumnsysIfCurLoadTx | read-only | current | Current rate of outbound traffic on interface measured in kilobits per second. |
| 1.3.6.1.4.1.3942.1.1.3.21 | NodesysMem | |||
| 1.3.6.1.4.1.3942.1.1.3.21.1 | ScalarsysMemTotal | read-only | current | Total memory in bytes. |
| 1.3.6.1.4.1.3942.1.1.3.21.2 | ScalarsysMemFree | read-only | current | Free memory in bytes. |
| 1.3.6.1.4.1.3942.1.1.3.21.3 | ScalarsysNetBufsInUse | read-only | current | Number of network buffers currently in use. |
| 1.3.6.1.4.1.3942.1.1.3.21.4 | ScalarsysNetPagesTotal | read-only | current | Total number of pages. |
| 1.3.6.1.4.1.3942.1.1.3.21.5 | ScalarsysNetPagesInUse | read-only | current | Number of pages currently in use. |
| 1.3.6.1.4.1.3942.1.1.3.22 | NodesysQueue | |||
| 1.3.6.1.4.1.3942.1.1.3.22.1 | TablesysQueueTable | not-accessible | current | Statistics of system queues. |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1 | RowsysQueueEntry | not-accessible | current | |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1.1 | ColumnsysQueueIndex | read-only | current | The index value which uniquely identifies system packet queue to which statistics in this entry is applicable. |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1.2 | ColumnsysQueueName | read-only | current | Symbol name of system packet queue. |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1.3 | ColumnsysQueueLen | read-only | current | Current queue length. |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1.4 | ColumnsysQueueMaxLen | read-only | current | Maximum known queue length. |
| 1.3.6.1.4.1.3942.1.1.3.22.1.1.5 | ColumnsysQueueDrops | read-only | current | Queue drops. |
| 1.3.6.1.4.1.3942.1.1.3.23 | NodesysMgmt | |||
| 1.3.6.1.4.1.3942.1.1.3.23.1 | NodesysMgmtGlobals | |||
| 1.3.6.1.4.1.3942.1.1.3.23.1.1 | ScalarsysMgmtAccess | read-only | current | String with ftp access details in the form 'username:password@ftpserverIP' used as default ftp account for management operations. |
| 1.3.6.1.4.1.3942.1.1.3.23.1.2 | ScalarsysMgmtSrcIp | read-write | current | Actual device address to use as source IP address in ftp sessions for management data transfer. |
| 1.3.6.1.4.1.3942.1.1.3.23.1.3 | ScalarsysMgmtCurrentState | read-only | current | Current state is 'busy' while any management action is active and immediately goes either to 'idle' when current action is failed or to 'hold' if action succee… |
| 1.3.6.1.4.1.3942.1.1.3.23.1.4 | ScalarsysMgmtOperProgress | read-only | current | This indicator value corresponds to action progress in percentage. If action fails, this value immediately is frozen until sysMgmtCurrentState goes to 'idle'. … |
| 1.3.6.1.4.1.3942.1.1.3.23.1.5 | ScalarsysMgmtErrorString | read-only | current | Error string providing more details about error reasons indicated by sysMgmtFrmwDlResult, sysMgmtFrmwUlResult, sysMgmtLicDlResult, sysMgmtLicUlResult, sysMgmtC… |
| 1.3.6.1.4.1.3942.1.1.3.23.1.6 | ScalarsysMgmtHoldTimer | read-only | current | This countdown timer shows the value in seconds left till result of previous management action is hold intact. This timer also means time remaining until devic… |
| 1.3.6.1.4.1.3942.1.1.3.23.2 | NodesysMgmtFrmw | |||
| 1.3.6.1.4.1.3942.1.1.3.23.2.1 | ScalarsysMgmtFrmwDlPath | read-write | current | Filename (with optional path w/o leading '/') of downloadable firmare file at ftp server. Any successful SET operation on sysMgmtFrmwDlPath starts management a… |
| 1.3.6.1.4.1.3942.1.1.3.23.2.2 | ScalarsysMgmtFrmwDlResult | read-only | current | The result code of firmware downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged til… |
| 1.3.6.1.4.1.3942.1.1.3.23.2.3 | ScalarsysMgmtFrmwUlPath | read-write | current | Filename (with optional path w/o leading '/') of firmare file which should be uploaded to ftp server. Any successful SET operation on sysMgmtFrmwUlPath starts … |
| 1.3.6.1.4.1.3942.1.1.3.23.2.4 | ScalarsysMgmtFrmwUlResult | read-only | current | The result code of firmware uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till … |
| 1.3.6.1.4.1.3942.1.1.3.23.3 | NodesysMgmtLic | |||
| 1.3.6.1.4.1.3942.1.1.3.23.3.1 | ScalarsysMgmtLicDlPath | read-write | current | Filename (with optional path w/o leading '/') of downloadable license file at ftp server. Any successful SET operation on sysMgmtLicDlPath starts management ac… |
| 1.3.6.1.4.1.3942.1.1.3.23.3.2 | ScalarsysMgmtLicDlResult | read-only | current | The result code of license downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till… |
| 1.3.6.1.4.1.3942.1.1.3.23.3.3 | ScalarsysMgmtLicUlPath | read-write | current | Filename (with optional path w/o leading '/') of license file which should be uploaded to ftp server. Any successful SET operation on sysMgmtLicUlPath starts n… |
| 1.3.6.1.4.1.3942.1.1.3.23.3.4 | ScalarsysMgmtLicUlResult | read-only | current | The result code of license uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till n… |
| 1.3.6.1.4.1.3942.1.1.3.23.4 | NodesysMgmtCfg | |||
| 1.3.6.1.4.1.3942.1.1.3.23.4.1 | ScalarsysMgmtCfgDlPath | read-write | current | Filename (with optional path w/o leading '/') of downloadable config file at ftp server. Any successful SET operation on sysMgmtCfgDlPath starts management act… |
| 1.3.6.1.4.1.3942.1.1.3.23.4.2 | ScalarsysMgmtCfgDlResult | read-only | current | The result code of config downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till … |
| 1.3.6.1.4.1.3942.1.1.3.23.4.3 | ScalarsysMgmtCfgUlPath | read-write | current | Filename (with optional path w/o leading '/') of configuration file which should be uploaded to ftp server. Any successful SET operation on sysMgmtCfgUlPath st… |
| 1.3.6.1.4.1.3942.1.1.3.23.4.4 | ScalarsysMgmtCfgUlResult | read-only | current | The result code of config uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till ne… |
| 1.3.6.1.4.1.3942.1.1.3.100 | NodeaquasystemMIBConformance | |||
| 1.3.6.1.4.1.3942.1.1.3.100.1 | NodeaquasystemMIBCompliances | |||
| 1.3.6.1.4.1.3942.1.1.3.100.1.1 | ComplianceaquasystemMIBCompliance | current | The compliance statement for Infinet wireless routers. | |
| 1.3.6.1.4.1.3942.1.1.3.100.2 | NodeaquasystemMIBGroups | |||
| 1.3.6.1.4.1.3942.1.1.3.100.2.1 | GroupsystemGroup | current | The system group of objects provided for management of various WanFlex system parameters. |