ARECA-SATA-CARD3-MIB
206 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18928 | Nodeareca | |||
| 1.3.6.1.4.1.18928.1 | NodearecaGroup1 | |||
| 1.3.6.1.4.1.18928.1.3 | NodesataRaidCard3 | |||
| 1.3.6.1.4.1.18928.1.3.1 | NodesystemInformation | |||
| 1.3.6.1.4.1.18928.1.3.1.1 | ScalarsiVendor | read-only | mandatory | The vendor name of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.2 | ScalarsiModel | read-only | mandatory | The model name of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.3 | ScalarsiSerial | read-only | mandatory | The serial number of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.4 | ScalarsiFirmVer | read-only | mandatory | The firmware version of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.5 | ScalarsiBootVer | read-only | mandatory | The Boot version of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.6 | ScalarsiMbrVer | read-only | mandatory | The master boot record version of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.7 | ScalarsiProcessor | read-only | mandatory | The processor name of raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.8 | ScalarsiCpuSpeed | read-only | mandatory | The CPU speed (in MHZ, e.g. 400) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.9 | ScalarsiICache | read-only | mandatory | The CPU internal Instruction cache size (in bytes, e.g. 32768) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.10 | ScalarsiDCache | read-only | mandatory | The CPU interanl data cache size (in bytes, e.g. 32768) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.11 | ScalarsiSCache | read-only | mandatory | The CPU secondary cache size (in bytes, e.g. 32768) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.12 | ScalarsiMemory | read-only | mandatory | The memory size (in MB, e.g. 128) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.13 | ScalarsiMemSpeed | read-only | mandatory | The memory speed (in MHz) of Raid subsystem. |
| 1.3.6.1.4.1.18928.1.3.1.14 | ScalarsiEcc | read-only | mandatory | The sdram ECC capability of Raid subsystem (0:no ECC, 1:ECC). |
| 1.3.6.1.4.1.18928.1.3.1.15 | ScalarsiHosts | read-only | mandatory | The number of host channels, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.1.16 | ScalarsiHddSlots | read-only | mandatory | The number of HDD slots, e.g. 16. |
| 1.3.6.1.4.1.18928.1.3.1.17 | ScalarsiRaidSets | read-only | mandatory | The number of RAIDSET supported, e.g. 16. |
| 1.3.6.1.4.1.18928.1.3.1.18 | ScalarsiVolumeSets | read-only | mandatory | The number of VOLUMESET supported, e.g. 16. |
| 1.3.6.1.4.1.18928.1.3.1.19 | ScalarsiEvents | read-only | mandatory | The number of events supported, e.g. 16. |
| 1.3.6.1.4.1.18928.1.3.1.20 | ScalarsiFans | read-only | mandatory | The number of FANS, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.1.21 | ScalarsiPowers | read-only | mandatory | The number of Powers, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.1.22 | ScalarsiRaid6 | read-only | mandatory | 0:no RAID6, 1:RAID6. |
| 1.3.6.1.4.1.18928.1.3.1.23 | ScalarsiDhcp | read-only | mandatory | 0:disabled, 1:enabled. |
| 1.3.6.1.4.1.18928.1.3.1.24 | ScalarsiBeeper | read-only | mandatory | 0:disabled, 1:enabled. |
| 1.3.6.1.4.1.18928.1.3.1.25 | ScalarsiUsage | read-only | mandatory | 0:normal, 1:JBOD. |
| 1.3.6.1.4.1.18928.1.3.1.26 | ScalarsiMaxATA | read-only | mandatory | 33/66/100/133 if ATA, 150 if SATA. |
| 1.3.6.1.4.1.18928.1.3.1.27 | ScalarsiRebuildRate | read-only | mandatory | 5,20,50,80 in %. |
| 1.3.6.1.4.1.18928.1.3.1.28 | ScalarsiBaudRate | read-only | mandatory | 1200,2400,4800,9600,19200,38400,57600,115200. |
| 1.3.6.1.4.1.18928.1.3.2 | NodehwMonitor | |||
| 1.3.6.1.4.1.18928.1.3.2.1 | ScalarhwControllerBoardInstalled | read-only | mandatory | Enclosure Installed? |
| 1.3.6.1.4.1.18928.1.3.2.2 | ScalarhwControllerBoardDescription | read-only | mandatory | Enclosure description. |
| 1.3.6.1.4.1.18928.1.3.2.3 | ScalarhwControllerBoardNumberOfPower | read-only | mandatory | # of power supply, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.2.4 | ScalarhwControllerBoardNumberOfVol | read-only | mandatory | # of Voltage, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.2.5 | ScalarhwControllerBoardNumberOfFan | read-only | mandatory | # of Fan, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.2.6 | ScalarhwControllerBoardNumberOfTemp | read-only | mandatory | # of Temperature, e.g. 2. |
| 1.3.6.1.4.1.18928.1.3.2.7 | TablehwControllerBoardPowerTable | not-accessible | mandatory | A table containing Power information. |
| 1.3.6.1.4.1.18928.1.3.2.7.1 | RowhwControllerBoardPowerEntry | not-accessible | mandatory | Information about a particular current power state. |
| 1.3.6.1.4.1.18928.1.3.2.7.1.1 | ColumnhwControllerBoardPowerIndex | read-only | mandatory | Power index, 1..#of powers. |
| 1.3.6.1.4.1.18928.1.3.2.7.1.2 | ColumnhwControllerBoardPowerDesc | read-only | mandatory | Power description. |
| 1.3.6.1.4.1.18928.1.3.2.7.1.3 | ColumnhwControllerBoardPowerState | read-only | mandatory | Power state 0:failed, 1:ok. |
| 1.3.6.1.4.1.18928.1.3.2.8 | TablehwControllerBoardVolTable | not-accessible | mandatory | A table containing voltage information. |
| 1.3.6.1.4.1.18928.1.3.2.8.1 | RowhwControllerBoardVolEntry | not-accessible | mandatory | Information about a particular current voltage state. |
| 1.3.6.1.4.1.18928.1.3.2.8.1.1 | ColumnhwControllerBoardVolIndex | read-only | mandatory | Voltage index, 1..#of voltages. |
| 1.3.6.1.4.1.18928.1.3.2.8.1.2 | ColumnhwControllerBoardVolDesc | read-only | mandatory | Voltage description. |
| 1.3.6.1.4.1.18928.1.3.2.8.1.3 | ColumnhwControllerBoardVolValue | read-only | mandatory | Voltage value. |
| 1.3.6.1.4.1.18928.1.3.2.9 | TablehwControllerBoardFanTable | not-accessible | mandatory | A table containing Fan information. |
| 1.3.6.1.4.1.18928.1.3.2.9.1 | RowhwControllerBoardFanEntry | not-accessible | mandatory | Information about a particular current fan state. |
| 1.3.6.1.4.1.18928.1.3.2.9.1.1 | ColumnhwControllerBoardFanIndex | read-only | mandatory | Fan index, 1..#of fans. |
| 1.3.6.1.4.1.18928.1.3.2.9.1.2 | ColumnhwControllerBoardFanDesc | read-only | mandatory | Fan description. |
| 1.3.6.1.4.1.18928.1.3.2.9.1.3 | ColumnhwControllerBoardFanSpeed | read-only | mandatory | Fan speed in RPM, e.g. 3200. |
| 1.3.6.1.4.1.18928.1.3.2.10 | TablehwControllerBoardTempTable | not-accessible | mandatory | A table containing temperature information. |
| 1.3.6.1.4.1.18928.1.3.2.10.1 | RowhwControllerBoardTempEntry | not-accessible | mandatory | Information about a particular current temperature state. |
| 1.3.6.1.4.1.18928.1.3.2.10.1.1 | ColumnhwControllerBoardTempIndex | read-only | mandatory | Temperature index, 1..#of voltages. |
| 1.3.6.1.4.1.18928.1.3.2.10.1.2 | ColumnhwControllerBoardTempDesc | read-only | mandatory | Temperature description. |
| 1.3.6.1.4.1.18928.1.3.2.10.1.3 | ColumnhwControllerBoardTempValue | read-only | mandatory | Temperature value. |
| 1.3.6.1.4.1.18928.1.3.3 | NodehddInformation | |||
| 1.3.6.1.4.1.18928.1.3.3.1 | TablehddInfoTable | not-accessible | mandatory | A table containing HDD information. |
| 1.3.6.1.4.1.18928.1.3.3.1.1 | RowhddInfoEntry | not-accessible | mandatory | Information about a particular current HDD state. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.1 | ColumnhddSlots | read-only | mandatory | HDD slot#, 1..#of HDD. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.2 | ColumnhddName | read-only | mandatory | HDD name. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.3 | ColumnhddSerial | read-only | mandatory | HDD serial number. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.4 | ColumnhddFirmVer | read-only | mandatory | HDD firmware reversion. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.5 | ColumnhddCapacity | read-only | mandatory | HDD total capacity in mega byte. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.6 | ColumnhddPio | read-only | mandatory | HDD PIO mode. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.7 | ColumnhddCudma | read-only | mandatory | HDD CUDMA mode. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.8 | ColumnhddSudma | read-only | mandatory | HDD SUDMA mode. |
| 1.3.6.1.4.1.18928.1.3.3.1.1.9 | ColumnhddState | read-only | mandatory | HDD state. |
| 1.3.6.1.4.1.18928.1.3.4 | NoderaidsetInformation | |||
| 1.3.6.1.4.1.18928.1.3.4.1 | TableraidInfoTable | not-accessible | mandatory | A table containing RaidSet information. |
| 1.3.6.1.4.1.18928.1.3.4.1.1 | RowraidInfoEntry | not-accessible | mandatory | Information about a particular current RaidSet state. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.1 | ColumnraidNumber | read-only | mandatory | RiadSet#, 0..#raidset-1. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.2 | ColumnraidName | read-only | mandatory | Raid set name. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.3 | ColumnraidDisks | read-only | mandatory | Member disks. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.4 | ColumnraidState | read-only | mandatory | Raid state. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.5 | ColumnraidTotalCapacity | read-only | mandatory | RaidSet total capacity in MB, totla capacity. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.6 | ColumnraidFreeCapacity | read-only | mandatory | RaidSet free capacity in MB, totla capacity. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.7 | ColumnraidMemberDiskCapacity | read-only | mandatory | RaidSet member disk capacity in MB, totla capacity. |
| 1.3.6.1.4.1.18928.1.3.4.1.1.8 | ColumnraidMemberDiskChannels | read-only | mandatory | Member disk channels. |
| 1.3.6.1.4.1.18928.1.3.5 | NodevolumesetInformation | |||
| 1.3.6.1.4.1.18928.1.3.5.1 | TablevolInfoTable | not-accessible | mandatory | A table containing VolumeSet information. |
| 1.3.6.1.4.1.18928.1.3.5.1.1 | RowvolInfoEntry | not-accessible | mandatory | Information about a particular current VolumeSet state. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.1 | ColumnvolNumber | read-only | mandatory | Volume number, 0..#of volume-1. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.2 | ColumnvolName | read-only | mandatory | Volume name. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.3 | ColumnvolRaidName | read-only | mandatory | Raid name. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.4 | ColumnvolCapacity | read-only | mandatory | In MB, Capacity. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.5 | ColumnvolState | read-only | mandatory | VolumeSet state. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.6 | ColumnvolProgress | read-only | mandatory | percentage. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.7 | ColumnvolCluster | read-only | mandatory | Clustering, 0:no, 1:yes. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.8 | ColumnvolChannel | read-only | mandatory | SCSI Channel,0,1. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.9 | ColumnvolSCSIID | read-only | mandatory | SCSI ID, 0..15. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.10 | ColumnvolSCSILUN | read-only | mandatory | SCSI LUN, 0..7. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.11 | ColumnvolRaidLevel | read-only | mandatory | Raid Level, 0,1,3,5,6. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.12 | ColumnvolStripes | read-only | mandatory | Stripe size, in bytes. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.13 | ColumnvolDisks | read-only | mandatory | Disks. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.14 | ColumnvolCache | read-only | mandatory | Cache enabled, 0:no, 1:yes. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.15 | ColumnvolTag | read-only | mandatory | Tag enabled, 0:no, 1:yes. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.16 | ColumnvolMaxSpeed | read-only | mandatory | Max speed. |
| 1.3.6.1.4.1.18928.1.3.5.1.1.17 | ColumnvolCurrentSpeed | read-only | mandatory | Current speed. |
| 1.3.6.1.4.1.18928.1.3.6 | NodeeventInformation | |||
| 1.3.6.1.4.1.18928.1.3.6.1 | TableeventInfoTable | not-accessible | mandatory | A table containing Event information. |
| 1.3.6.1.4.1.18928.1.3.6.1.1 | RoweventInfoEntry | not-accessible | mandatory | Information about a particular current event. |
| 1.3.6.1.4.1.18928.1.3.6.1.1.1 | ColumneventNumber | read-only | mandatory | Event number, 0..#events-1. |
| 1.3.6.1.4.1.18928.1.3.6.1.1.2 | ColumneventString | read-only | mandatory | Event string. |
| 1.3.6.1.4.1.18928.1.3.7 | NoderaidSubSysTraps | |||
| 1.3.6.1.4.1.18928.1.3.7.128 | NodersCreate | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.129 | NodersDelete | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.130 | NodersExpand | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.131 | NodersRebuild | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.132 | NodersDegraded | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.133 | NodersNoEvent | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.256 | NodevsInitializing | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.257 | NodevsRebuilding | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.258 | NodevsMigrating | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.259 | NodevsChecking | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.260 | NodevsCompleteInit | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.261 | NodevsCompleteRebuild | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.262 | NodevsCompleteMigrating | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.263 | NodevsCompleteChecking | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.264 | NodevsCreate | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.265 | NodevsDelete | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.266 | NodevsModify | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.267 | NodevsDegraded | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.268 | NodevsFailed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.269 | NodevsRevived | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.270 | NodevsTotals | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.384 | NodepdAdded | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.385 | NodepdRemoved | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.386 | NodepdReadError | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.387 | NodepdWriteError | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.388 | NodepdAtaEccError | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.389 | NodepdAtaChangeMode | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.390 | NodepdTimeOut | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.391 | NodepdMarkFailed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.392 | NodepdPciError | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.393 | NodepdSmartFailed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.394 | NodepdCreatePass | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.395 | NodepdModifyPass | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.396 | NodepdDeletePass | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.397 | NodepdTotals | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.512 | NodescsiReset | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.513 | NodescsiParity | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.514 | NodescsiModeChange | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.515 | NodescsiTotals | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.640 | NodehwSdram1BitEcc | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.641 | NodehwSdramMultiBitEcc | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.642 | NodehwTempController | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.643 | NodehwTempBackplane | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.644 | NodehwVoltage15 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.645 | NodehwVoltage3 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.646 | NodehwVoltage5 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.647 | NodehwVoltage12 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.648 | NodehwVoltage13 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.649 | NodehwVoltage25 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.650 | NodehwVoltage125 | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.651 | NodehwPower1Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.652 | NodehwFan1Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.653 | NodehwPower2Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.654 | NodehwFan2Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.655 | NodehwPower3Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.656 | NodehwFan3Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.657 | NodehwPower4Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.658 | NodehwFan4Failed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.659 | NodehwUpsPowerLoss | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.660 | NodehwTempControllerR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.661 | NodehwTempBackplaneR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.662 | NodehwVoltage15R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.663 | NodehwVoltage3R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.664 | NodehwVoltage5R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.665 | NodehwVoltage12R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.666 | NodehwVoltage13R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.667 | NodehwVoltage25R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.668 | NodehwVoltage125R | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.669 | NodehwPower1FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.670 | NodehwFan1FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.671 | NodehwPower2FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.672 | NodehwFan2FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.673 | NodehwPower3FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.674 | NodehwFan3FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.675 | NodehwPower4FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.676 | NodehwFan4FailedR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.677 | NodehwUPSPowerR | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.678 | NodehwSystemRestarted | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.679 | NodehwTest | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.680 | NodehwSystemRecovered | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.768 | NodeghmRecover | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.769 | NodeghmOverTemp | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.770 | NodeghmFailed | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.771 | NodeghmUnderVoltage | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.772 | NodeghmOverVoltage | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.773 | NodeghmDiscovered | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.774 | NodeghmLostMig | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.775 | NodeghmRestartLBA | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.776 | NodeghmHTTPLogin | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.777 | NodeghmTelnetLogin | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.778 | NodeghmVt100Login | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.779 | NodeghmGUILogin | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.780 | NodeghmFCLinkUp | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.781 | NodeghmFCLinkDown | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.782 | Nodeghm16BytesCDB | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.783 | NodeghmInitLBA | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.784 | NodeghmRebuildLBA | %s. | ||
| 1.3.6.1.4.1.18928.1.3.7.785 | NodeghmMigrateLBA | %s. |