ARRIS-D5-VIDEO-MIB
21 objects
No module-level DESCRIPTION found.
Imported Objects
| ARRIS-MIB | arrisD5UEQam |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| D5DescriptorBuffer | OCTET STRING (SIZE (0..255)) | current | A buffer that contains MPEG Descriptor data. |
| D5DescriptorIndex | INTEGER ( 1..65535 ) | current | An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream. |
| D5DescriptorTag | INTEGER ( 1..255 ) | current | A convenient type definition for MPEG Descriptor Tags values. |
| D5ElementaryStreamType | INTEGER ( 1..255 ) | current | A convenient type definition for MPEG Elementary Stream Type values. |
| D5GeneratePat | INTEGER { enable-auto(1), disable(2), force-nit-entry(3) } | current | Defines the controls on the PAT generation: enable-auto Enable the auto-generation of the PAT table disable Disable to local generation of the PAT table force-nit-entry Enable the auto-generation of the PAT table but fo… |
| D5MappingType | INTEGER { default(1), dynamic(2), static(3) } | current | A convenient type definition for mapping rules. These can be as follows static - configured by the operator to over-ride the default mapping dynamic - allocated by Q5 on the fly and currently in operation default - repr… |
| D5PersistenceType | INTEGER { nonVolatile(0), volatile(1) } | current | A convenient type definition that defines whether or not a rule should be saved persistently across system reboots. |
| D5PID | INTEGER ( 0..8192 ) | current | A convenient type definition for MPEG PID values. |
| D5PidStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG PID status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - no… |
| D5PidType | INTEGER { es(1), psi(2), ghost(3) } | current | A convenient type definition for PID - whether PSI or ES. |
| D5Program | Unsigned32 | current | A convenient type definition for MPEG Program Number values. |
| D5ProgStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive … |
| D5ProgType | INTEGER { es(1), psi(2) } | current | A convenient type definition for Programs - whether PSI or ES. |
| D5RemappingRuleSourceType | INTEGER { qam(1), udpIp(2), nsg(3), passThrough(4), default(5) } | current | A convenient type definition for the source of rule used to create a dynamic PID/PROG remapping qam - A Qam remap rule was used to create the remapping udpIp - A Udp/IP rule was used to create the remapping nsg - Remapp… |
| D5TransportStreamDirection | INTEGER { incoming(1), outgoing(2) } | current | A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the D5, typically over IP outgoing - the Transport Stream is being generated by the D5 and sent t… |
| D5TransportStreamIndex | INTEGER ( 1..65535 ) | current | An identifier that uniquely identifies an MPEG Transport Stream in the D5 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS. |
| D5TransportStreamStatus | INTEGER { active(1), timingOut(2), inactive(3) } | current | A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states … |
| D5VideoChannelContainerNameType | DisplayString (SIZE (0..16)) | current | A unique name that identifies a particular channel-container. |
| D5VideoDefaultMappingScheme | INTEGER { disabled(1), udpPort(2), udpPortLegacy(3) } | current | A convenient type definition for the default-mappings that are supported by the D5. The default-mapping schemes are used to identify which QAM to map an input TS to, where the TS has no static configuration associated w… |
| D5VideoProgramOverSubscriptionAction | INTEGER { none(0), notification(1), recover(2) } | current | Defines the status of the log entry: none No action is performed, program monitoring is not enabled. notification An event is logged indicating that the program has exceeded it's bandwidth. recover Action will be taken … |
| D5VideoQamLogQamState | INTEGER { one-shot(1), active(2), complete(3) } | current | Defines the status of the log entry: one-shot Log entry describes a one off event (no START/STOP attributes) active Log entry is currently active. This means that the START event has occured and the STOP event is pendin… |