ARRIS-GPS-MIB
16 objects
This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS GPS devices.
Imported Objects
| ARRIS-MIB | arris |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.12 | IdentityarrisGpsMib | This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS GPS devices. | ||
| 1.3.6.1.4.1.4115.12.1 | ScalararrisGpsScanOnBoot | read-write | current | Enables or disables GPS scans during the device start up. If this MIB is set, the modem will automatically start a GPS scan when it is power cycled or reset. I… |
| 1.3.6.1.4.1.4115.12.2 | ScalararrisGpsScanPeriodically | read-write | current | Enables or disables periodic GPS scans. Note that if ScanPeriodically is set to FALSE and either ScanOnBoot is set to FALSE or the initial scan fails then the … |
| 1.3.6.1.4.1.4115.12.3 | ScalararrisGpsPeriodicInterval | read-write | current | When ScanPeriodically is true, this value indicates the interval in seconds at which GPS scan is performed. This time period represents the amount of time betw… |
| 1.3.6.1.4.1.4115.12.4 | ScalararrisGpsPeriodicTime | read-write | current | PeriodicTime is used only to set the 'phase' of the GPS scan. The actual value of PeriodicTime can be arbitrarily far into the past or future. For example, if … |
| 1.3.6.1.4.1.4115.12.5 | ScalararrisGpsPowerDownAfterSuccessfulScan | read-write | current | Enable/disable the ability to put the GPS to sleep after a successful scan. When set to FALSE the GPS will run periodically (if configured) even if a successfu… |
| 1.3.6.1.4.1.4115.12.6 | ScalararrisGpsScanTimeout | read-write | current | Specifies the time-out value in seconds since the scan started after which the scan will time out. A timed out scan is to be reported as C2 with ErrorDetails i… |
| 1.3.6.1.4.1.4115.12.7 | ScalararrisGpsScanStatus | read-only | current | Indicates the current status of this scan. Enumeration of: - Indeterminate (The scan has not been executed and there are no valid scan results available) - InP… |
| 1.3.6.1.4.1.4115.12.8 | ScalararrisGpsErrorDetails | read-only | current | Provides more detail when the ScanStatus is either Error or Error_TIMEOUT. The value of this parameter is not persistent. TR-069/TR-181 reference: Device.FAP.G… |
| 1.3.6.1.4.1.4115.12.9 | ScalararrisGpsLastScanTime | read-only | current | The date and time when the last GPS scan completed. Note that completion does not imply scan success. The Unknown Time value is returned if no scans have been … |
| 1.3.6.1.4.1.4115.12.10 | ScalararrisGpsLastSuccessfulScanTime | read-only | current | Specifies the date and time, when the GPS scan last completed successfully. This value is retained across reboot and is only reset after another scan completes… |
| 1.3.6.1.4.1.4115.12.11 | ScalararrisGpsLockedLatitude | read-only | current | This parameter specifies the latitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, north of the eq… |
| 1.3.6.1.4.1.4115.12.12 | ScalararrisGpsLockedLongitude | read-only | current | This parameter specifies the longitude of the device's position in degrees, multiplied by 1 million. The positive value signifies the direction, east of the pr… |
| 1.3.6.1.4.1.4115.12.13 | ScalararrisGpsNumberOfSatellites | read-only | current | The number of satellites that were locked during the test execution. The greater the number of satellites the better the precision of the results. This value i… |
| 1.3.6.1.4.1.4115.12.14 | ScalararrisGpsReset | read-write | current | Setting this to true will cause a reset on the GPS Hardware. Setting this to false has no effect. The value of this parameter is not part of the device configu… |
| 1.3.6.1.4.1.4115.12.15 | ScalararrisGpsSuccessfulScanSinceBootup | read-only | current | Indicates whether or not the last successful scan occurred since the last time the modem powered up or reset. The value of this parameter is not persistent. TR… |