MIB Viewer

ARRIS-MTA-DEVICE-MIB

322 objects
This MIB module supplies the basic proprietary management objects for ARRIS MTA devices.
Imported Objects
ARRIS-MIBarrisProdIdCM
INET-ADDRESS-MIBInetAddress InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDateAndTime DisplayString PhysAddress TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.4115.1.3.3IdentityarrisMtaDevMibThis MIB module supplies the basic proprietary management objects for ARRIS MTA devices.
1.3.6.1.4.1.4115.1.3.3.1NodearrisMtaDevMibObjects
1.3.6.1.4.1.4115.1.3.3.1.1NodearrisMtaDevBase
1.3.6.1.4.1.4115.1.3.3.1.1.1NodearrisMtaDevMonitoringMib
1.3.6.1.4.1.4115.1.3.3.1.1.1.1NodearrisMtaDevControl
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.1ScalararrisMtaDevResetCallStatsread-writecurrentSetting this object to true(1) will reset the following objects to their default values: arrisMtaDevRtpTxPktsTotal, arrisMtaDevRtpRxPktsTotal, arrisMtaDevRtpPe…
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.2ScalararrisMtaDevEnableCallpSigTraceread-writecurrentThis MIB object is used to turn Callp signaling Message tracing on in the SYSLOG. This option should be used with care as excessive messaging could adversly af…
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.3ScalararrisMtaDevEnableCallStatsSyslogRptread-writecurrentThis MIB object is used to enable end of call statistics reporting and Callp signaling last message reporting to syslog. If this is set to enable(1), then the …
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.4ScalararrisMtaDevSwDnldNoSvcImpactread-writecurrentThis MIB object is used to control the firmware download service impact feature. The value is kept in non-volatile storage. Operation is as follows: disable(0)…
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.5ScalararrisMtaDevEnableCallSigLastMsgRptread-writecurrentThis MIB object is used to enable or disable reporting of the Callp signaling 'last message' to the MIB objects arrisMtaDevSignalingLastMsg1 through arrisMtaDe…
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.6ScalararrisMtaDevNsadSwDnldStatusread-onlycurrentThis MIB object is set to download-Idle upon startup and when the firmware download has completed. The download-Acceptance-In-Progress setting denots that the …
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.7ScalararrisMtaDevRestoreNvmFactoryDefaultread-writecurrentSetting this object to true(1) will reset the NVM to default values: Setting this object to false(2) will do nothing. Reading this object always returns false(…
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.8ScalararrisMtaDevEnableLoggingread-writecurrentThis MIB object is used to enable or disable logging via the NCS logger. Use arrisMtaDevLoggingContext to specify the desired log type.
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.9ScalararrisMtaDevLoggingContextread-writecurrentThis MIB object sets the logging context for reading logs via SNMP.
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.10ScalararrisMtaDevEnablePacketLossConcealmentread-writecurrentThis MIB object sets enable/disable of the Packet loss concealment(PLC) via SNMP.
1.3.6.1.4.1.4115.1.3.3.1.1.1.1.11ScalararrisMtaDevEnableRTCPStaticIntervalread-writecurrentThis MIB object sets enable/disable of RTCP static interval via SNMP.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2NodearrisMtaDevTrace
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.1ScalararrisMtaDevRtpTxPktsTotalread-onlycurrentThis MIB object reports the total number of RTP packets sent from the MTA since it was last started up or reset. This value represents the total number of pack…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.2ScalararrisMtaDevRtpRxPktsTotalread-onlycurrentThis MIB object reports the total number of RTP packets received from the MTA since it was last started up or reset. This value represents the total number of …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.3ScalararrisMtaDevRtpPercentPktsLostTotalread-onlycurrentThis MIB object reports the percentage of RTP packets lost since the MTA was last started up or reset. This value represents the total number of packets lost f…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.4ScalararrisMtaDevProvStateread-onlycurrentThe MIB object arrisMtaDevProvState reports the current provisioning state of the MTA.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.5ScalararrisMtaDevSWUpgradeStatusread-onlycurrentThis MIB object reports the current software upgrade status of the device. This MIB object obtains its value from the MIB object docsDevSwOperStatus.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.6ScalararrisMtaDevSignalingAvgLatencyread-onlycurrentThis MIB object reports the Average latency/delay for responses to signaling messages. This is measured in milliseconds. It is calculated from values obtained …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.7ScalararrisMtaDevSignalingTxSuccessfulMsgCntread-onlycurrentThis MIB object reports the total number of successful signaling messages sent from the MTA. Setting the MIB object arrisMtaDevResetCallStats to a value of tru…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.8ScalararrisMtaDevSignalingRxSuccessfulMsgCntread-onlycurrentThis MIB object reports the total number of successful signaling messages received by the MTA. Setting the MIB object arrisMtaDevResetCallStats to a value of t…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.9ScalararrisMtaDevSignalingTxNAKCntread-onlycurrentThis MIB object reports the total number of negative acknowledgement signaling messages (NAKmessages) sent from the MTA. Setting the MIB object arrisMtaDevRese…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.10ScalararrisMtaDevSignalingRxNAKCntread-onlycurrentThis MIB object reports the total number of negative acknowledgement signaling messages (NAKmessages) received by the MTA. Setting the MIB object arrisMtaDevRe…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.11ScalararrisMtaDevSignalingRxNoACKCntread-onlycurrentThis MIB object reports the total number of 'no acknowledgement' signaling messages received by the MTA. Setting the MIB object arrisMtaDevResetCallStats to a …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.12ScalararrisMtaDevSignalingLastMsg1read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.13ScalararrisMtaDevSignalingLastMsg2read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.14ScalararrisMtaDevSignalingLastMsg3read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.15ScalararrisMtaDevSignalingLastMsg4read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.16ScalararrisMtaDevSignalingLastMsg5read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.17ScalararrisMtaDevSignalingLastMsg6read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.18ScalararrisMtaDevSignalingLastMsg7read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.19ScalararrisMtaDevSignalingLastMsg8read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.20ScalararrisMtaDevSignalingLastMsg9read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.21ScalararrisMtaDevSignalingLastMsg10read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.22ScalararrisMtaDevSignalingLastMsg11read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.23ScalararrisMtaDevSignalingLastMsg12read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.24ScalararrisMtaDevSignalingLastMsg13read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.25ScalararrisMtaDevSignalingLastMsg14read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.26ScalararrisMtaDevSignalingLastMsg15read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.27ScalararrisMtaDevSignalingLastMsg16read-onlycurrentThis MIB object displays a 255 byte segment of the Callp last signaling message sent or received. This MIB object is one of sixteen total MIB objects which tog…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.44ScalararrisMtaDevEstimatedMinutesRemainingread-onlycurrentAn estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.45ScalararrisMtaDevEstimatedChargeRemainingread-onlycurrentAn estimate of the battery charge remaining expressed as a percent of full charge. A value of -1 indicates the information is unavailable at this time.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46TablearrisMtaDevCallStatsTablenot-accessiblecurrentThis table reports various end of call statistics.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1RowarrisMtaDevCallStatsEntrynot-accessiblecurrentEach end point entry represents one telephone line
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.1ColumnarrisMtaDevCallStatsIndexnot-accessiblecurrentThe unique value which identifies the endpoint.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.2ColumnarrisMtaDevCallStatsRtpTxPktsread-onlycurrentThis MIB object reports the total number of RTP packets sent from the MTA during the most recent call. This MIB object is included in a table of MIB objects wh…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.3ColumnarrisMtaDevCallStatsRtpRxPktsread-onlycurrentThis MIB object reports the total number of RTP packets received by the MTA during the most recent call. This MIB object is included in a table of MIB objects …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.4ColumnarrisMtaDevCallStatsRtpPercentPktsLostread-onlycurrentThis MIB object reports the percentage of RTP packets lost during the most recent call. This MIB object is included in a table of MIB objects which indexed by …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.5ColumnarrisMtaDevCallStatsAvgJitterread-onlycurrentThis MIB object reports the average jitter measurement during the most recent call. This MIB object is included in a table of MIB objects which indexed by the …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.6ColumnarrisMtaDevCallStatsMaxJitterread-onlycurrentThis MIB object reports the maximum jitter measurement during the most recent call. This MIB object is included in a table of MIB objects which indexed by the …
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.7ColumnarrisMtaDevCallStatsAvgLatencyread-onlycurrentThis MIB object reports the average latency observed during the most recent call. This MIB object is included in a table of MIB objects which indexed by the en…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.9ColumnarrisMtaDevCallStatsHookStatusread-onlycurrentThis MIB object reports the hook status for each endpoint. Note: The disconnected state is not a valid return value for this MIB object.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.10ColumnarrisMtaDevCallStatsSLICStatusread-onlycurrentThis MIB object reports the over temperature condition of the SLIC chips.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.11ColumnarrisMtaDevCallStatsEndPntOpStatusread-onlycurrentThis MIB object reports the current operational status for each endpoint. This MIB object obtains its value from the MIB object ifAdminOperStatus.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.12ColumnarrisMtaDevCallStatsLineSubStateread-onlycurrentThis MIB object reports the current sub state for each line. This MIB object obtains its value from the lineRec.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.47ScalararrisMtaDevRtpPktsLostTotalread-onlycurrentThis MIB object reports the RTP packets lost since the MTA was last started up or reset. This value represents the total number of packets lost for all endpoin…
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.48ScalararrisMtaDevLastCallStartTimeread-onlycurrentThis MIB object reports the last call start time from the eMTA.
1.3.6.1.4.1.4115.1.3.3.1.1.1.2.49ScalararrisMtaDevLastCallEndTimeread-onlycurrentThis MIB object reports the last call end time from the eMTA.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3NodearrisMtaDevParameters
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.1ScalararrisMtaDevMaxCpeAllowedread-onlycurrentThis MIB object reflects the 'MaxCpeAllowed' parameter in the CM config file.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.2ScalararrisMtaDevNetworkAccessread-onlycurrentThis MIB object reflects the value of the 'NetworkAccess' parameter set in the CM config file.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3TablearrisMtaDevLineParameterTablenot-accessiblecurrentThis table reports various line parameters on the eMTA.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1RowarrisMtaDevLineParameterEntrynot-accessiblecurrentEach end point entry represents one telephone line
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.1ColumnarrisMtaDevInterfaceIndexread-onlycurrentThis MIB object shows the corresponding ifTable ifindex object for a particular line.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.2ColumnarrisMtaDevPktcDevEvEndpointNameread-onlycurrentThis MIB object provides the endpoint name in the following format: 'AALN/X:FQDN/IP Address'.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.3ColumnarrisMtaDevActiveConnectionsread-onlycurrentThis MIB object shows the number of connections for a particular line whose mode is receive only, send only, send/receive, but not inactive.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.4ColumnarrisMtaDevLineMWIActiveread-onlycurrentThis MIB object shows the MWI is active or not.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4TablearrisMtaDevUpSvcFlowParameterTablenot-accessiblecurrentThis table reports various Upstream Service Flow parameters on the eMTA.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1RowarrisMtaDevUpSvcFlowParameterEntrynot-accessiblecurrentEach end point entry represents one upstream service flow index
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1.1ColumnarrisMtaDevDocsQosParamUpSvcFlowSFIDread-onlycurrentThis MIB object shows the corresponding upstream service flow SFID for a valid service flow index.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1.2ColumnarrisMtaDevDocsQosParamUpSvcFlowSchedulingTyperead-onlycurrentThis MIB object shows the corresponding upstream service flow scheduling type for a valid service flow index.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.5ScalararrisMtaDevQosModeread-onlycurrentThis MIB object reflects the CPFS_DSX_DQOS bit of the Callp Feature Switch setting.
1.3.6.1.4.1.4115.1.3.3.1.1.1.3.6ScalararrisMtaDevEventFormatread-onlycurrentThis object is used to determine which packet cable event format we are using: pktc10(0): pktc 1.0 event, pktc15(1): pktc 1.5 event.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4NodearrisMtaDevVqm
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.1ScalararrisMtaDevVqmLineread-writecurrentSpecifies the line for Voice Quality Metrics reporting.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.2ScalararrisMtaDevVqmClearread-writecurrentClears Voice Quality Metrics for a single line or for all lines. Line number is specified using arrisMtaDevVqmLine.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.3ScalararrisMtaDevVqmEnableread-writecurrentEnables/Disables recording Local Voice Metrics.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4TablearrisMtaDevVqmCallNumberTablenot-accessiblecurrentVoice Quality Metric history on a per call number basis. This table provides call number history identifiers that can be entered into arrisMtaDevVqmIdent to pr…
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1RowarrisMtaDevVqmCallNumberEntrynot-accessiblecurrentVoice Quality Metric history on a per call number basis.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1.1ColumnarrisMtaDevVqmCallNumberIndexnot-accessiblecurrentA unique value which identifies the call number.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1.2ColumnarrisMtaDevVqmCallNumberIdsread-onlycurrentThis displays a history of Call number identifiers for the specified line.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.5ScalararrisMtaDevVqmCallNumberIdentifierread-writecurrentSpecifies the call number for Voice Quality Metrics reporting. Valid Ids to be entered here are obtained from arrisMtaDevVqmCallNumberIds.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6TablearrisMtaDevVqmMetricTablenot-accessiblecurrentVoice Quality Metrics pertaining to a particular call number.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1RowarrisMtaDevVqmMetricEntrynot-accessiblecurrentVoice Quality Metrics pertaining to a particular call number.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.1ColumnarrisMtaDevVqmMetricIndexnot-accessiblecurrentA unique value which identifies the metric.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.2ColumnarrisMtaDevVqmMetricValuesread-onlycurrentThis displays metrics for the specified call number.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.3ColumnarrisMtaDevVqmThresholdsread-writecurrentSets/displays metric thresholds.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.7ScalararrisMtaDevVqmEnableRemoteread-writecurrentDetermines policy to control Remote Voice Metrics (XR). The value of this MIB is persistent if it is set after configuration. When set to 'default', the value …
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.8ScalararrisMtaDevVqmThresholdEnableread-writecurrentZero Disables threshold reporting for Voice Metrics. Non-zero specifies the maximum number of logs allowed to be sent to report when a threshold is exceeded. T…
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.9ScalararrisMtaDevVqmHistorySizeread-writecurrentThe history size of Vqm record. Range 2 to 50.
1.3.6.1.4.1.4115.1.3.3.1.1.1.4.10ScalararrisMtaDevVqmCallNumberIdentifierLastCallread-onlycurrentThe last call identifier for Voice Quality Metrics reporting.
1.3.6.1.4.1.4115.1.3.3.1.1.2NodearrisMtaDevDhcp
1.3.6.1.4.1.4115.1.3.3.1.1.2.1NodearrisMtaDevDhcpMtaParameters
1.3.6.1.4.1.4115.1.3.3.1.1.2.1.1ScalararrisMtaDevDhcpMtaIpFQDNread-onlycurrentThis displays the currently defined MTA FQDN.
1.3.6.1.4.1.4115.1.3.3.1.1.2.1.2ScalararrisMtaDevDhcpMtaIpAddrread-onlycurrentThis displays the currently leased IP address .
1.3.6.1.4.1.4115.1.3.3.1.1.2.1.3ScalararrisMtaDevDhcpMtaSubNetMaskread-onlycurrentThis displays the current IP subnet mask in use.
1.3.6.1.4.1.4115.1.3.3.1.1.2.1.4ScalararrisMtaDevDhcpMtaGatewayIpAddrread-onlycurrentThis displays the current IP gateway address in use.
1.3.6.1.4.1.4115.1.3.3.1.1.2.1.5ScalararrisMtaDevDhcpMtaConfigFileread-onlycurrentThis displays the MTA configuration file to be retrived.
1.3.6.1.4.1.4115.1.3.3.1.1.2.2NodearrisMtaDevDhcpSvrParameters
1.3.6.1.4.1.4115.1.3.3.1.1.2.2.1ScalararrisMtaDevDhcpStateread-onlycurrentThis displays the current Dhcp state of the MTA.
1.3.6.1.4.1.4115.1.3.3.1.1.2.2.2ScalararrisMtaDevDhcpPrimaryDhcpSvrIpAddrread-onlycurrentThis displays the primary Dhcp server address.
1.3.6.1.4.1.4115.1.3.3.1.1.2.2.3ScalararrisMtaDevDhcpSecondaryDhcpSvrIpAddrread-onlycurrentThis displays the secondary Dhcp server address.
1.3.6.1.4.1.4115.1.3.3.1.1.2.2.4ScalararrisMtaDevDhcpPrimaryDNSSvrIpAddrread-onlycurrentThis displays the primary DNS server address.
1.3.6.1.4.1.4115.1.3.3.1.1.2.2.5ScalararrisMtaDevDhcpSecondaryDNSSvrIpAddrread-onlycurrentThis displays the secondary DNS server address.
1.3.6.1.4.1.4115.1.3.3.1.1.2.3NodearrisMtaDevDhcpLeaseParameters
1.3.6.1.4.1.4115.1.3.3.1.1.2.3.1ScalararrisMtaDevDhcpOfferedLeaseTimeread-onlycurrentThis displays the current IP Lease time expressed in seconds.
1.3.6.1.4.1.4115.1.3.3.1.1.2.3.2ScalararrisMtaDevDhcpLeaseTimeRemainingread-onlycurrentThis displays the remaining IP Lease time expressed in seconds.
1.3.6.1.4.1.4115.1.3.3.1.1.2.3.3ScalararrisMtaDevDhcpTimeUntilRenewread-onlycurrentThis displays the current time remaining before the MTA starts the lease renewal process. This time is expressed in seconds.
1.3.6.1.4.1.4115.1.3.3.1.1.2.3.4ScalararrisMtaDevDhcpTimeUntilRebindread-onlycurrentThis displays the current time remaining before the MTA starts the lease rebinding process. This time is expressed in seconds.
1.3.6.1.4.1.4115.1.3.3.1.1.2.4NodearrisMtaDevDhcpPktcOptParameters
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.1ScalararrisMtaDevDhcpPktcOptionIdread-onlycurrentThis displays the Pktc DHCP Option ID of 122/177.
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.2ScalararrisMtaDevDhcpSvcProviderSnmpEntityread-onlycurrentCurrent FQDN of the Service Provider's SNMP Entity.
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.3ScalararrisMtaDevDhcpKerberosRealmFqdnread-onlycurrentFQDN of the Kerberos Realm. The PacketCable architecture requires an MTA to authenticate itself to the TSP's network via the Kerberos protocol. A Kerberos Real…
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.4ScalararrisMtaDevDhcpRequestTgtread-onlycurrentThis sub-option encodes a boolean value which indicates whether an MTA should or should not utilize a TGT (Ticket Granting Ticket) when obtaining a service tic…
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.5ScalararrisMtaDevDhcpProvTimerread-onlycurrentThe provisioning timer defines the maximum time allowed for the MTA provisioning process to complete. If this timer expires before the MTA has completed the pr…
1.3.6.1.4.1.4115.1.3.3.1.1.2.4.6ScalararrisMtaDevDhcpSecTicketInvalidread-onlycurrentThis object defines a Kerberos Ticket Control Mask that instructs the MTA to invalidate the specific application server Kerberos ticket(s) that are stored loca…
1.3.6.1.4.1.4115.1.3.3.1.2NodearrisMtaDevSetup
1.3.6.1.4.1.4115.1.3.3.1.2.3NodearrisMtaDevOperationalSetup
1.3.6.1.4.1.4115.1.3.3.1.2.3.1ScalararrisMtaDevVPNomJitterBufferread-writecurrentIndicates the Voice Playout nominal jitter buffer.
1.3.6.1.4.1.4115.1.3.3.1.2.3.2ScalararrisMtaDevVPJitterBufferModeread-writecurrentIndicates the Voice Playout jitter buffer mode.
1.3.6.1.4.1.4115.1.3.3.1.2.3.3ScalararrisMtaDevRTPTxQueueSizeread-writecurrentSets the RTP transmit queue size.
1.3.6.1.4.1.4115.1.3.3.1.2.3.4ScalararrisMtaDevEchoCancellerTailLengthread-writecurrentIndicates the length in milliseconds of the echo canceller tail. This object is only settable during the processing of the MTA config file.
1.3.6.1.4.1.4115.1.3.3.1.2.3.5ScalararrisMtaDevDspHandleNonPhaseReversedToneread-writecurrentSet handling the DSP non phase reversed tone detection for modem. A value of off(1) indicates the tone will not be handled. A default value of onECANEnable(2) …
1.3.6.1.4.1.4115.1.3.3.1.2.3.6ScalararrisMtaDevProvMethodIndicatorread-writecurrentIndicates the method used to provision the device. This object should only be changed by the configuration file. The following provisioning methods are support…
1.3.6.1.4.1.4115.1.3.3.1.2.3.7ScalararrisMtaCfgRTPDynPortStartread-writecurrentThis defines the starting value for a range of ports that will be used dynamically when sending out SIP RTP voice packets. This MIB and arrisMtaCfgRTPDynPortEn…
1.3.6.1.4.1.4115.1.3.3.1.2.3.8ScalararrisMtaCfgRTPDynPortEndread-writecurrentThis defines the starting value for a range of ports that will be used dynamically when sending out SIP RTP voice packets. This MIB and arrisMtaCfgRTPDynPortSt…
1.3.6.1.4.1.4115.1.3.3.1.2.3.9ScalararrisMtaDevVPMaxJitterBufferread-writecurrentIndicates the Voice Playout maximum jitter buffer.
1.3.6.1.4.1.4115.1.3.3.1.2.3.10NodearrisMtaDevOptionality
1.3.6.1.4.1.4115.1.3.3.1.2.3.10.1ScalararrisMtaDevOptionality8ChnlKeyread-writedeprecatedWhen correct key is entered, 8 channel DSP operation can be enabled using arrisMtaDevOptionality8ChnlEnable mib.
1.3.6.1.4.1.4115.1.3.3.1.2.3.10.2ScalararrisMtaDevOptionality8ChnlEnableread-writedeprecatedEnable or Disable 8 channel DSP operation. Enabling requires presence of a valid 8 Channel DSP Key. This key is entered via the arrisMtaDevOptionality8ChnlKey …
1.3.6.1.4.1.4115.1.3.3.1.2.3.10.3ScalararrisMtaDevOptionalityLoopDiagKeyread-writedeprecatedWhen correct key is entered, Loop Diag can be performed.
1.3.6.1.4.1.4115.1.3.3.1.2.3.11NodearrisMtaDevLoopVoltageMgmt
1.3.6.1.4.1.4115.1.3.3.1.2.3.11.1ScalararrisMtaDevLoopVoltageKeyread-writecurrentWhen correct key is entered, Loop Voltage Mgmt. policy can be set. This MIB is only writable via configuration file.
1.3.6.1.4.1.4115.1.3.3.1.2.3.11.2ScalararrisMtaDevLoopVoltagePolicyread-writecurrent1. Maintain loop idle voltage at all times. 2. Apply loop idle voltage at all times except when no RF QAM carrier is detected. The intent of this policy option…
1.3.6.1.4.1.4115.1.3.3.1.2.3.11.3ScalararrisMtaDevLoopVoltageResetTimeoutread-writecurrentSpecifies the time after which to remove loop voltage if the MTA has not come in-service. Acceptable range is 8-1800 seconds. Stored value must be divisible by…
1.3.6.1.4.1.4115.1.3.3.1.2.3.11.4ScalararrisMtaDevLoopVoltageMaintTimeoutread-writecurrentSpecifies the time that loop voltage will be supplied regardless of RF condition. See arrisMtaDevLoopVoltagePolicy for more detailed information. This MIB is o…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12NodearrisMtaDevGainControl
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.1ScalararrisMtaDevGainControlFSKread-writecurrentThe transmit digital gain adjustment (dBm) for MTA generated FSK tones (CID and VMWI). A value of 2 increases the FSK level by 2 dBm. A value of -2 decreases t…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.2ScalararrisMtaDevGainControlCASread-writecurrentThe transmit digital gain adjustment (dBm) for MTA generated CAS tone. A value of 2 increases the playout level by 2 dBm. A value of -2 decreases the playout l…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.3ScalararrisMtaDevGainControlLocalToneread-writecurrentThe transmit digital gain adjustment (dBm) for all MTA generated Call Progress tones (Dialtone, Busytone, Ringback, etc.) toward the CPE. A value of 2 increase…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.4ScalararrisMtaDevGainControlNetworkToneread-writecurrentThe transmit digital gain adjustment (dBm) for MTA generated Call Progress tones toward the network (Ringback). A value of 2 increases the playout level by 2 d…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.5ScalararrisMtaDevGainControlLocalDTMFread-writecurrentThe transmit digital gain adjustment (dBm) for MTA generated DTMF tones toward the local CPE (ex. DTMF CID). A value of 2 increases the playout level by 2 dBm.…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.6ScalararrisMtaDevGainControlNetworkDTMFread-writecurrentThe transmit digital gain adjustment (dBm) for MTA generated DTMF tones toward the network (ex. IPDT Pulse Dialing). A value of 2 increases the playout level b…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.7ScalararrisMtaDevGainControlTxVoiceread-writecurrentThe transmit digital gain adjustment (dBm) for voice. A value of 2 increases the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. This v…
1.3.6.1.4.1.4115.1.3.3.1.2.3.12.8ScalararrisMtaDevGainControlRxVoiceread-writecurrentThe receive digital gain adjustment (dBm) for voice. A value of 2 increases the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. NOTE: U…
1.3.6.1.4.1.4115.1.3.3.1.2.3.13ScalararrisMtaDevEnableIndexTenElevenread-writecurrentThis MIB object is used to enable telephone line indices ten and eleven instead of telephone line indices nine and ten. Index ten will be the mininum index for…
1.3.6.1.4.1.4115.1.3.3.1.2.3.14ScalararrisMtaDevDspCpsSettingread-writecurrentEnable or Disable the ECAN fast constant power signal detection. A default value of on(2) makes the echo cancellor disengage immediately when a high level cons…
1.3.6.1.4.1.4115.1.3.3.1.2.3.15NodearrisMtaDevDiag
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1TablearrisMtaDevDiagLoopTablenot-accessiblecurrentArris Touchstone specific per line loop diagnostic details
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1RowarrisMtaDevDiagLoopEntrynot-accessiblecurrentEach end point entry represents one telephone line
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.1ColumnarrisMtaDevDiagLoopIndexnot-accessiblecurrentThe unique value which identifies the port.
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.2ColumnarrisMtaDevDiagLoopTimeread-onlycurrentReports the time & date when loop diagnostics were last run on the selected line. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.3ColumnarrisMtaDevDiagLoopRequestread-writecurrentSetting this value to true will send a diagnostics request on the line. Reading this value will always return false. The maintenance state of the line indicate…
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.4ColumnarrisMtaDevDiagLoopLastResultread-onlycurrentStart loop diag testing with arrisMtaDevDiagLoopRequest. Thereafter reading this MIB provides current status. When testing is complete, the status will be eith…
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.5ColumnarrisMtaDevDiagLoopHazardousPotentialTestread-onlycurrentDisplays the hazardous-potential-test result for the last time that loop diags were run. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.6ColumnarrisMtaDevDiagLoopForeignEmfTestread-onlycurrentDisplays the foreign-emf-test result for the last time that loop diags were run. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.7ColumnarrisMtaDevDiagLoopResistiveFaultsTestread-onlycurrentDisplays the resistive-faults-test result for the last time that loop diags were run. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.8ColumnarrisMtaDevDiagLoopReceiverOffHookTestread-onlycurrentDisplays the receiver-offhook-test result for the last time that loop diags were run. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.9ColumnarrisMtaDevDiagLoopRingerTestread-onlycurrentDisplays the ringer-test result for the last time that loop diags were run. (Patent Pending)
1.3.6.1.4.1.4115.1.3.3.1.2.3.16ScalararrisMtaDevVbdOverwriteLineBitmapread-writecurrentWhen set, changes fax/modem jitter buffer settings for the selected line to the VbdOverwriteJitterBuffer values entered in the config file. (0) no line set, (0…
1.3.6.1.4.1.4115.1.3.3.1.2.3.17ScalararrisMtaDevVbdOverwriteMinJitterBufferread-writecurrentWhen used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will be used as the minimun jitter buffer setting in all modem/fax calls for the sel…
1.3.6.1.4.1.4115.1.3.3.1.2.3.18ScalararrisMtaDevVbdOverwriteNomJitterBufferread-writecurrentWhen used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will be used as the nominal jitter buffer setting in all modem/fax calls for the sel…
1.3.6.1.4.1.4115.1.3.3.1.2.3.19ScalararrisMtaDevVbdOverwriteMaxJitterBufferread-writecurrentWhen used in conjuction with arrisMtaDevVbdOverwriteLineBitmap, this value will be used as the maximum jitter buffer setting in all modem/fax calls for the sel…
1.3.6.1.4.1.4115.1.3.3.1.2.3.20ScalararrisMtaDevEventHideFQDNandIPAddressread-writecurrentThis MIB object is used to enable hide MTA fqdn and IP address on basic web page event log . The default value for this MIB object is disable(0).
1.3.6.1.4.1.4115.1.3.3.1.2.3.21ScalararrisMtaDevDhcpOptionOverrideread-writecurrentTypically the value received in the DHCP OFFER should not change in the DHCP ACK. DHCP RENEW/REBIND values should be consistent with the value received in the …
1.3.6.1.4.1.4115.1.3.3.1.2.3.22ScalararrisMtaDevTFTPServerAddrOverrideFQDNread-writecurrentFQDN of the TFTP Server that holds the MTA config file. This is used to override the default TFTP Server. This can only be used with the gupiTftpSvrOverride(11…
1.3.6.1.4.1.4115.1.3.3.1.2.3.23ScalararrisMtaDevDefaultReasonNoCIDNameread-writecurrentThis MIB object determines what reason is sent to the CPE when the Caller ID Name is not included in the signal request. The default value for this MIB object …
1.3.6.1.4.1.4115.1.3.3.1.2.3.24ScalararrisMtaDevSipConfigFileURLread-writecurrentThe URL of the SIP configuration file for redownloading provisioning and configuration parameters to this device.
1.3.6.1.4.1.4115.1.3.3.1.2.3.25ScalararrisMtaDevSipDwnldConfigread-writecurrentEnable a redownload of the SIP configuration file parameters specified via the configuration file URL obtained in the MIB object arrisMtaDevSipConfigFileURL. W…
1.3.6.1.4.1.4115.1.3.3.1.2.3.26ScalararrisMtaDevSpecialConfigurationOverrideEnableread-writecurrentThis object is used to enable proprietary features of the Arris MTA From left to right, the specified bit indicates whether or not the corresponding MTA featur…
1.3.6.1.4.1.4115.1.3.3.1.2.3.27ScalararrisMtaDevRtcpTosValueread-writecurrentThis value determines what value is used in the IP TOS byte for RTCP packets.
1.3.6.1.4.1.4115.1.3.3.1.2.3.28ScalararrisMtaDevAutomaticOsiDelayread-writecurrentThis MIB defines the time, in 100ms increments, to wait after a DLCX is received before determining if an automatic OSI should be generated by the MTA to force…
1.3.6.1.4.1.4115.1.3.3.1.2.3.29ScalararrisMtaDevCustomJitterBufferEnabledread-writecurrentEnables ability to customize jitter buffer settings using the CustomMinJitterBuffer, CustomNomJitterBuffer and CustomMaxJitterBuffer mibs. When this setting is…
1.3.6.1.4.1.4115.1.3.3.1.2.3.30ScalararrisMtaDevCustomMinJitterBufferread-writecurrentIndicates the customized voice playout minimum jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on. Valid range is 5-160 in inc…
1.3.6.1.4.1.4115.1.3.3.1.2.3.31ScalararrisMtaDevCustomNomJitterBufferread-writecurrentIndicates the customized voice playout nominal jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on. Valid range is 5-160 in inc…
1.3.6.1.4.1.4115.1.3.3.1.2.3.32ScalararrisMtaDevCustomMaxJitterBufferread-writecurrentIndicates the customized voice playout maximum jitter buffer to be used when the arrisMtaDevCustomJitterBufferEnabled is set to on. Valid range is 5-160 in inc…
1.3.6.1.4.1.4115.1.3.3.1.2.3.33ScalararrisMtaDevEnableDHCPLogread-writecurrentUsed to enable/disable MTA DHCP logging.
1.3.6.1.4.1.4115.1.3.3.1.2.3.34ScalararrisMtaDevEnableMGCPLogread-writecurrentUsed to enable/disable CallP Signalling logging
1.3.6.1.4.1.4115.1.3.3.1.2.3.35ScalararrisMtaDevClearDHCPLogread-writecurrentUsed to Clear the MTA DHCP Logs.
1.3.6.1.4.1.4115.1.3.3.1.2.3.36ScalararrisMtaDevClearMGCPLogread-writecurrentUsed to Clear the MTA MGCP Logs.
1.3.6.1.4.1.4115.1.3.3.1.2.3.37ScalararrisMtaDevTDDReportToCMSread-writecurrentAllows configuration of whether TDD detection events are reported to CMS.
1.3.6.1.4.1.4115.1.3.3.1.2.3.38ScalararrisMtaDevAutomaticCallResourceRecoveryread-writecurrentMIB defines the number of seconds to delay upon an on-hook event before detecting that all resources acquired while a call was active need to be recovered on a…
1.3.6.1.4.1.4115.1.3.3.1.2.3.39ScalararrisMtaDevPacketcableProvisioningFlowread-onlycurrentPacketCable simplified provisioning flow support for PC1.5 Compliance. This object will be updated by the Provisioning Code. The following PC1.5 Compliant Prov…
1.3.6.1.4.1.4115.1.3.3.1.2.3.40NodearrisMtaDevLevelControl
1.3.6.1.4.1.4115.1.3.3.1.2.3.40.1ScalararrisMtaDevLevelControlOffHookEnableread-writecurrentAllows for the use of the arrisMtaDevLevelControlOffHookFSK and arrisMtaDevLevelControlOffHookCAS MIBs. When this is set to enable, those MIBs will be replace …
1.3.6.1.4.1.4115.1.3.3.1.2.3.40.2ScalararrisMtaDevLevelControlOffHookFSKread-writecurrentThe transmit digital gain setting (dBm) for MTA generated FSK tones (CID and VMWI) while the line is off hook. The MIB can be adjusted in 1dBm increcements fro…
1.3.6.1.4.1.4115.1.3.3.1.2.3.40.3ScalararrisMtaDevLevelControlOffHookCASread-writecurrentThe transmit digital gain setting (dBm) for MTA generated CAS tones (CID and VMWI) while the line is off hook. The MIB can be adjusted in 1dBm increcements fro…
1.3.6.1.4.1.4115.1.3.3.1.2.3.41ScalararrisMtaDevOffHookFskDelayread-writecurrentMIB defines the time (in milliseconds) to delay before sending the FSK to the CPE. The delay starts upon receiving the ACK (DTMF D) from the CPE in response to…
1.3.6.1.4.1.4115.1.3.3.1.2.3.42ScalararrisMtaDevT38Timeoutread-writecurrentAllows configuration of the T38 timeout, during which time the audio is muted, before T38 failure events are reported to CMS.
1.3.6.1.4.1.4115.1.3.3.1.2.3.43ScalararrisMtaDevSuperG3FaxRelayread-writecurrentAllows configuration of SuperG3 fax processing upon detection of the V21 CM or V.8 data signal. When disabled, the MTA still detects the signaling for SuperG3 …
1.3.6.1.4.1.4115.1.3.3.1.2.3.44ScalararrisMtaDevDTMFEndEventForceAscendingread-writecurrentUsed to enable/disable RFC 2833 DTMF end event duration force ascending.
1.3.6.1.4.1.4115.1.3.3.1.2.3.45ScalararrisMtaDevDspHandleBellModemToneread-writecurrentSet the DSP to detect the Bell Modem Tone (2225kHz). The Bell Modem Tone is frequently used by older data modems, usually in low speed setups. When this MIB is…
1.3.6.1.4.1.4115.1.3.3.1.2.3.46ScalararrisMtaDevDhcpSubOpt3Immediateread-writecurrentThis MIB object will control the comparison/handling of MTA DHCP Opt 122 SubOpt 3. A value of off(1) will disable DHCP option 122 suboption 3 comparison/handli…
1.3.6.1.4.1.4115.1.3.3.1.2.3.47ScalararrisMtaDevMaxCallPServiceFlowsread-writecurrentUsed to limit the number of calls (service flows). Outgoing calls, incoming calls, and conference call legs are included in this count. The EMTA ports are able…
1.3.6.1.4.1.4115.1.3.3.1.2.3.48NodearrisMtaDevCmIp
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1TablearrisMtaDevCmIpTablenot-accessiblecurrentThe ARRIS proprietary IP Address table used for getting CM IP address and physical address from MTA.
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1RowarrisMtaDevCmIpEntrynot-accessiblecurrentEach entry contains one IP address and one physical address.
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.1ColumnarrisMtaDevCmIpIndexnot-accessiblecurrentIndex used to order the arrisMtaDevCmIpTable entries. Currently, CM only supports single IP address, thus there would be no more than 1 entry in arrisMtaDevCmI…
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.2ColumnarrisMtaDevCmIpAddressTyperead-onlycurrentThe type of arrisMtaDevCmIpAddress.
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.3ColumnarrisMtaDevCmIpAddressread-onlycurrentThe CM IP address.
1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.4ColumnarrisMtaDevCmIpPhysAddressread-onlycurrentThe CM physical address.
1.3.6.1.4.1.4115.1.3.3.1.2.3.49ScalararrisMtaDevHDAudioDefaultPayloadTyperead-writecurrentThe setting of this MIB provisions the MTA to offer the G722 codec with the defined static payload of (9)or a payload in the dynamic range of (96-127). This MI…
1.3.6.1.4.1.4115.1.3.3.1.2.3.50ScalararrisMtaDevWBSLICread-writecurrentThe setting of this MIB sets the SLIC and DSP to WB mode. This MIB setting is persistent. This MIB should be set from the CM configuration file. If this MIB va…
1.3.6.1.4.1.4115.1.3.3.1.2.3.51ScalararrisMtaDevProvisionedCodecArrayread-writecurrentThis is the list of codecs offered in the SDP as well as codecs returned in capabilities for an AUEP response. This MIB is only used with NCS signaling. These …
1.3.6.1.4.1.4115.1.3.3.1.2.3.52ScalararrisMtaDevHDAudioG722SampleRateread-writecurrentThis MIB controls the SampleRate advertised in the rtpmap for the HD codec G722. The actual sample rate is 16000 however for backward compatibility with RFC 18…
1.3.6.1.4.1.4115.1.3.3.1.2.3.53ScalararrisMtaDevHDAudioEnableread-writecurrentThe setting of this MIB enables the MTA to support HD Audio codecs such as G722.
1.3.6.1.4.1.4115.1.3.3.1.2.3.54ScalararrisMtaDevRtcpJitterDisabledread-writecurrentThe setting of this MIB disables the MTA to report the real Jitter value in the RTCP packet.
1.3.6.1.4.1.4115.1.3.3.1.2.4NodearrisMtaDevEndPntSetup
1.3.6.1.4.1.4115.1.3.3.1.2.4.3TablearrisMtaDevEndPntTablenot-accessiblecurrentArris Touchstone specific per line provisioning details
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1RowarrisMtaDevEndPntEntrynot-accessiblecurrentEach end point entry represents one telephone line
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.1ColumnarrisMtaDevEndPntIndexnot-accessiblecurrentThe unique value which identifies the port.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.24ColumnarrisMtaDevEndPntDialingMethodread-writecurrentIndicates the method used to dial the digits for this telephony endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2), dial-pulse signaling is used to…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.25ColumnarrisMtaDevEndPntRingingWaveformread-writecurrentIndicates the voltage waveform used when ringing this telephony endpoint. If normal(1) is used the standard waveform will be applied. If sinusoidal(2) is speci…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.26ColumnarrisMtaDevEndPntFaxOnlyLineTimeoutread-writecurrentThis object is used to define a line as a fax only line for NCS. The default value of the object is zero which means no timeout. When the object is set to a no…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.27ColumnarrisMtaDevPersistentLineStatusread-writecurrentSet persistent line status. This MIB and the ifAdminStatus MIB impact the line status. If ignore(0) is set, the line status will be based on the setting of ifA…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.28ColumnarrisMtaDevEndPntCallWaitingRepeatSteadyread-writecurrentWhen enabled(1), it indicates that the call waiting tone should repeat forever. If disabled(0), it concludes using the finite rules.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.29ColumnarrisMtaDevEndPntCIDEnableread-writecurrentUsed to enable/disable the All the Caller ID field send to phone. If it's diabled, no Caller ID information will be sent.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.30ColumnarrisMtaDevEndPntCIDNameEnableread-writecurrentUsed to enable/disable the Name part of CallerID field send to phone.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.31ColumnarrisMtaDevEndPntCIDDateTimeEnableread-writecurrentUsed to enable/disable the Date/Time part of CallerID field send to phone.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.32ColumnarrisMtaDevEndPntLoopReversalread-writecurrentThis mib is used to manage loop polarity/reversal. When enabled(1), it indicates that the line should be reversed to normal once the originating party hangs up…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.33ColumnarrisMtaDevEndPntGainControlTxVoiceread-writecurrentThe transmit digital gain adjustment (dBm) for voice for a specific endpoint. When set to a value other than disabled(-128), this MIB supersedes the arrisMtaDe…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.34ColumnarrisMtaDevEndPntGainControlRxVoiceread-writecurrentThe transmit digital gain adjustment (dBm) for voice for a specific endpoint. When set to a value other than disabled(-128), this MIB supersedes the arrisMtaDe…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.35ColumnarrisMtaDevEndPntHDAudioEnableread-writecurrentThe setting of this MIB sets an individual line to support HD Audio codecs such as G722. The MTA MIB setting for arrisMtaDevHDAudioEnable can override the indi…
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.36ColumnarrisMtaDevEndPntHDAudioStatusread-onlycurrentUse this MIB to read the effective status of HD Audio for an endpoint.
1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.37ColumnarrisMtaDevEndPntCallPStateread-onlycurrentUse this MIB to read the status of callp state
1.3.6.1.4.1.4115.1.3.3.1.3NodearrisMtaDevPowerSupplyTelemetry
1.3.6.1.4.1.4115.1.3.3.1.3.2NodearrisMtaDevPwrSupplyBase
1.3.6.1.4.1.4115.1.3.3.1.3.2.1ScalararrisMtaDevBatteryChargerFWRevread-onlycurrentThe firmware rev of the battery charger.
1.3.6.1.4.1.4115.1.3.3.1.3.3NodearrisMtaDevPwrSupplyControl
1.3.6.1.4.1.4115.1.3.3.1.3.3.1ScalararrisMtaDevPwrSupplyEnableDataShutdownread-writecurrent
1.3.6.1.4.1.4115.1.3.3.1.3.3.2ScalararrisMtaDevPwrSupplyEnableWifiShutdownread-writecurrentThis MIB allows WTMx52 modems to shut down its wireless signal for power saving when modem switches to battery power. If set this MIB to true, when AC fail and…
1.3.6.1.4.1.4115.1.3.3.1.3.3.3ScalararrisMtaDevPwrSupplyLowBatteryThreshread-writecurrentSets the low battery threshold, which is used to detect a low battery condition. The variable is expressed in 10 watt*minutes/count. The initial default value …
1.3.6.1.4.1.4115.1.3.3.1.3.3.4ScalararrisMtaDevPwrSupplyTypicalIdlePwrread-onlycurrentThe typical Idle power expressed in 50 mw/count. A typical value is loaded upon power up. It is used in conjunction with the Tested Battery Capacity, Low Batte…
1.3.6.1.4.1.4115.1.3.3.1.3.3.5ScalararrisMtaDevPwrSupplyReplaceBatThreshread-writecurrentSets the minimum acceptable battery charge needed to achieve the desired End of Life holdup time based on typical Idle Power. If the Tested Battery Capacity mi…
1.3.6.1.4.1.4115.1.3.3.1.3.3.6ScalararrisMtaDevPwrSupplyChargeStateread-writecurrentCauses the battery to be charged to the level that is specified by the data. The value of charge is expressed in 10 watt*minutes/count. In order for the batter…
1.3.6.1.4.1.4115.1.3.3.1.3.3.8ScalararrisMtaDevPwrSupplyBatteryTestread-writecurrentThis MIB cannot be set on TM402 devices. This feature controls the scheduling of the battery test. TestScheduled: When written, causes the battery test schedul…
1.3.6.1.4.1.4115.1.3.3.1.3.3.9ScalararrisMtaDevPwrSupplyConfigRunTimeread-writecurrentAn estimate of the available run-time on the battery based upon the unit's typical idle power and the programmed battery charge setting. The available battery …
1.3.6.1.4.1.4115.1.3.3.1.3.3.10ScalararrisMtaDevPwrSupplyConfigReplaceBatTimeread-writecurrentDetermines the replace battery threshold in terms of run-time minutes. If a battery's capacity has degraded to a point where it can no longer provide more than…
1.3.6.1.4.1.4115.1.3.3.1.3.3.11ScalararrisMtaDevPwrSupplyConfigReplaceBatTime2read-writecurrentSame as arrisMtaDevPwrSupplyConfigReplaceBatTime but for 2nd battery.
1.3.6.1.4.1.4115.1.3.3.1.3.3.12ScalararrisMtaDevPwrSupplyOverTempAlarmControlread-writecurrentDetermines whether an Over Temperature Alarm is issued when the temperature specified in arrisMtaDevPwrSupplyOverTempAlarmThreshold is reached. Also determines…
1.3.6.1.4.1.4115.1.3.3.1.3.3.13ScalararrisMtaDevPwrSupplyOverTempAlarmThresholdread-writecurrentDetermines temperature threshold for Over Temperature Alarm. Minimum temperature is 50C. Maximum is 70C.
1.3.6.1.4.1.4115.1.3.3.1.3.3.14ScalararrisMtaDevPwrSupplyTemperatureread-onlycurrentThe current temperature in degrees C. This is only available when arrisMtaDevPwrSupplyOverTempAlarmControl is enabled.
1.3.6.1.4.1.4115.1.3.3.1.3.3.15ScalararrisMtaDevPwrSupplyHiTempBatteryShutdownControlread-writecurrentDetermines whether the battery will be turned off when the temperature reaches 75C and above.
1.3.6.1.4.1.4115.1.3.3.1.3.3.16ScalararrisMtaDevPwrSupplyHighestTemperatureread-onlycurrentThe highest recorded battery charger temperature in degrees C. This is only available when arrisMtaDevPwrSupplyOverTempAlarmControl is enabled.
1.3.6.1.4.1.4115.1.3.3.1.3.3.17ScalararrisMtaDevPwrSupplyHighestTemperatureTimeread-onlycurrentDisplays the time and date when the highest temperature was recorded.
1.3.6.1.4.1.4115.1.3.3.1.3.3.18ScalararrisMtaDevPwrSupplyHighestTemperatureClearread-writecurrentSetting this MIB Clears arrisMtaDevPwrSupplyHighestTemperature and arrisMtaDevPwrSupplyHighestTemperatureTime. These MIBs will be assigned new values in a maxi…
1.3.6.1.4.1.4115.1.3.3.1.3.3.19ScalararrisMtaDevPwrSupplyControlChargerResetread-writecurrentThis MIB object will reset the battery charger when set to true(1). Warning: Resetting the battery charger in an AC Fail condition will immediately shutdown th…
1.3.6.1.4.1.4115.1.3.3.1.3.4NodearrisMtaDevPwrSupplyTimers
1.3.6.1.4.1.4115.1.3.3.1.3.4.1ScalararrisMtaDevPwrSupplyDataShutdownTimeread-writecurrentIndicates the timeout period, in seconds, that the device will terminate data services. The timer will start upon loss of AC power and operation of battery bac…
1.3.6.1.4.1.4115.1.3.3.1.3.4.2ScalararrisMtaDevPwrSupplyFullChargeTimeread-writecurrentCauses the battery to be charged to 100% of its rated voltage and be maintained at that level according the number of days set by the data. After the time has …
1.3.6.1.4.1.4115.1.3.3.1.3.5NodearrisMtaDevPwrSupplyStats
1.3.6.1.4.1.4115.1.3.3.1.3.5.3TablearrisMtaDevBatteryStatusTablenot-accessiblecurrentThe Power Supply Telemetry table ...There will be one row in this table for each battery pack in the device
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1RowarrisMtaDevBatteryStatusEntrynot-accessiblecurrentStatus information for a single battery pack. An entry in this table exists for each battery pack contained in the device.
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.1ColumnarrisMtaDevBatteryStatusIndexnot-accessiblecurrentAn index value that uniquely identifies each battery pack in the MTA device. The table index ....
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.2ColumnarrisMtaDevBatteryOperStateread-onlycurrentIndicates the current operational state of the battery.
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.3ColumnarrisMtaDevBatteryLastStateChangeread-onlycurrentThe value of sysUpTime at the time the battery entered its current operational state. If the current state was entered prior to the last re-initialization of t…
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.4ColumnarrisMtaDevBatteryOperSubStateread-onlycurrentIndicates the current sub-state of the battery. This info is not designed to match the arrisMtaDevBatteryOperState but to provide additional information as to …
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.5ColumnarrisMtaDevBatteryOrderingCoderead-onlycurrentThe Arris ordering code for the battery(s) currently installed.
1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.6ColumnarrisMtaDevBatteryEpromread-onlycurrentBattery EPROM information for the battery(s) currently installed.
1.3.6.1.4.1.4115.1.3.3.1.3.5.4ScalararrisMtaDevPwrSupplyBatteryTestTimeread-onlycurrentThe present value of the Test Timer Scheduler expressed in days. If the value read is 0xFF (255), the timer has been paused.
1.3.6.1.4.1.4115.1.3.3.1.3.5.5ScalararrisMtaDevPwrSupplyRatedBatCapacityread-onlycurrentThe rated capacity of the battery that is currently installed. The value is expressed in units of energy (10 watt*minutes/count), rather than charge (amp*hours…
1.3.6.1.4.1.4115.1.3.3.1.3.5.6ScalararrisMtaDevPwrSupplyTestedBatCapacityread-onlycurrentThe measured battery capacity expressed in 10 watt*minutes/count as determined by the last battery test cycle.
1.3.6.1.4.1.4115.1.3.3.1.3.5.7ScalararrisMtaDevPwrSupplyBatStateOfChargeread-onlycurrentThe present battery state of charge expressed in 10 watt*minutes/count. This value is approximate and is re-calibrated following a battery test cycle.
1.3.6.1.4.1.4115.1.3.3.1.3.5.8ScalararrisMtaDevPwrSupplyReadBatteryPwrread-onlycurrentThe present load power expressed in 50mW/count and is an eight-second moving average. This is the power being removed or applied to the battery. Power is being…
1.3.6.1.4.1.4115.1.3.3.1.3.5.9ScalararrisMtaDevPwrSupplySecondsOnBatteryread-onlycurrentThe present value of time expired since AC Failed and running on the battery.
1.3.6.1.4.1.4115.1.3.3.1.3.5.10ScalararrisMtaDevPwrSupplyBatRatedMinutesread-onlycurrentAn estimate of the rated run-time on the battery based upon the unit's typical idle power and the rated capacity of the battery when fully charged.
1.3.6.1.4.1.4115.1.3.3.1.3.5.11ScalararrisMtaDevPwrSupplyBatAvailableMinutesread-onlycurrentAn estimate of the available run-time on the battery based upon the unit's typical idle power and the tested capacity of the battery when fully charged.
1.3.6.1.4.1.4115.1.3.3.1.3.5.12ScalararrisMtaDevPwrSupplySecondsOnBattery2read-onlycurrentSame as arrisMtaDevPwrSupplySecondsOnBattery but for 2nd battery.
1.3.6.1.4.1.4115.1.3.3.1.3.5.13ScalararrisMtaDevPwrSupplyBatRatedMinutes2read-onlycurrentSame as arrisMtaDevPwrSupplyBatRatedMinutes but for 2nd battery.
1.3.6.1.4.1.4115.1.3.3.1.3.5.14ScalararrisMtaDevPwrSupplyBatAvailableMinutes2read-onlycurrentSame as arrisMtaDevPwrSupplyBatAvailableMinutes but for 2nd battery.
1.3.6.1.4.1.4115.1.3.3.1.3.5.15ScalararrisMtaDevPwrSupplyTelemetryValuesread-onlycurrentPower Supply Telemetry Values. Fields are delimited by semicolons.
1.3.6.1.4.1.4115.1.3.3.1.3.6NodearrisMtaDevPwrSupplyAlarm
1.3.6.1.4.1.4115.1.3.3.1.3.6.1Nodeac-Fail
1.3.6.1.4.1.4115.1.3.3.1.3.6.2NodechargerOverTemp-Shutdown
1.3.6.1.4.1.4115.1.3.3.1.3.6.3NodechargerTemperature-High
1.3.6.1.4.1.4115.1.3.3.1.3.6.4NodebatteryCharger-Disabled
1.3.6.1.4.1.4115.1.3.3.1.3.6.5NodechargerDownload-Failed
1.3.6.1.4.1.4115.1.3.3.1.3.6.6Nodebattery-Mismatch
1.3.6.1.4.1.4115.1.3.3.1.3.6.7NodeupsAlarmBatteryBad
1.3.6.1.4.1.4115.1.3.3.1.3.6.8NodeupsAlarmLowBattery
1.3.6.1.4.1.4115.1.3.3.1.3.6.9NodeupsAlarmDepletedBattery
1.3.6.1.4.1.4115.1.3.3.1.3.6.10NodeupsAlarmUpsOutputOff
1.3.6.1.4.1.4115.1.3.3.1.3.6.11NodeupsAlarmOutputOffAsRequested
1.3.6.1.4.1.4115.1.3.3.1.3.6.12NodeupsAlarmGeneralFault
1.3.6.1.4.1.4115.1.3.3.1.3.6.13NodeupsAlarmShutdownImminent
1.3.6.1.4.1.4115.1.3.3.1.3.6.14NodeupsAlarmBatteryMissing
1.3.6.1.4.1.4115.1.3.3.1.3.6.15NodeupsAlarmAwaitingPower
1.3.6.1.4.1.4115.1.3.3.1.3.6.16NodeupsAlarmShutdownPending
1.3.6.1.4.1.4115.1.3.3.1.4NodearrisMtaDevLineCard
1.3.6.1.4.1.4115.1.3.3.1.4.1TablearrisMtaDevLineCardTablenot-accessiblecurrentThis table contains the state of each line card.
1.3.6.1.4.1.4115.1.3.3.1.4.1.1RowarrisMtaDevLineCardEntrynot-accessiblecurrentAn entry in the line card table.
1.3.6.1.4.1.4115.1.3.3.1.4.1.1.1ColumnarrisMtaDevLineCardLineNumbernot-accessiblecurrentThe unique value which identifies the line card.
1.3.6.1.4.1.4115.1.3.3.1.4.1.1.2ColumnarrisMtaDevLineCardStateread-onlycurrentThe line card state of the line.
1.3.6.1.4.1.4115.1.3.3.1.5NodearrisMtaDispSignal
1.3.6.1.4.1.4115.1.3.3.1.5.1TablearrisMtaDispSignalTablenot-accessiblecurrentThis table contains the NCS/SIP log
1.3.6.1.4.1.4115.1.3.3.1.5.1.1RowarrisMtaDispSignalEntrynot-accessiblecurrentAn entry in the log table.
1.3.6.1.4.1.4115.1.3.3.1.5.1.1.1ColumnarrisMtaDevDispSignalLogindexnot-accessiblecurrentThe index of signal log.
1.3.6.1.4.1.4115.1.3.3.1.5.1.1.2ColumnarrisMtaDevDispSignalLogread-onlycurrentShow the log of signal
1.3.6.1.4.1.4115.1.3.3.1.6NodearrisMtadocsQosService
1.3.6.1.4.1.4115.1.3.3.1.6.1TablearrisMtadocsQosServiceTablenot-accessiblecurrentThis table contains the NCS/SIP log
1.3.6.1.4.1.4115.1.3.3.1.6.1.1RowarrisMtadocsQosServiceEntrynot-accessiblecurrentAn entry in the Mta Qos log table.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.1ColumnarrisMtadocsQosServiceIndexnot-accessiblecurrentThe index of mta qos entry.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.2ColumnarrisMtadocsQosServiceFlowIDread-onlycurrentmta qos service flow id.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.3ColumnarrisMtadocsQosServiceClassNameread-onlycurrentmta qos service class name.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.4ColumnarrisMtdocsQosServiceFlowDirectionread-onlycurrentmta qos service flow direction.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.5ColumnarrisMtdocsQosServicePrimaryFlowread-onlycurrentmta qos service primary flow
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.6ColumnarrisMtadocsQosTrafficTyperead-onlycurrentmta qos traffic type.
1.3.6.1.4.1.4115.1.3.3.1.6.1.1.7ColumnarrisMtadocsQosServicePacketsread-onlycurrentPackets belong to the service.
1.3.6.1.4.1.4115.1.3.3.1.6.2ScalararrisMtadocsQosDisableLogginread-writecurrentdisable mta qos log collecting.
1.3.6.1.4.1.4115.1.3.3.1.6.3ScalararrisMtadocsQosLogClearread-writecurrentClear mta qos log. Always return true if get the value of this mib
1.3.6.1.4.1.4115.1.3.3.1.6.4TablearrisMtadocsQosShowDsxLogTablenot-accessiblecurrentThis table contains the DSX log
1.3.6.1.4.1.4115.1.3.3.1.6.4.1RowarrisMtadocsQosShowDsxLogEntrynot-accessiblecurrentAn entry in the log table.
1.3.6.1.4.1.4115.1.3.3.1.6.4.1.1ColumnarrisMtadocsQosShowDsxLogIndexnot-accessiblecurrentThe index of signal log.
1.3.6.1.4.1.4115.1.3.3.1.6.4.1.2ColumnarrisMtadocsQosShowDsxLogread-onlycurrentShow the log of dsx
Type Definitions
NameSyntaxStatusDescription
ArrsMtaDevProvMethodINTEGER { docsisOnly(0), fullPacketCable(1), packetCableMinusKDC(2), cps(3), gupi(4), singleMAC(5), basic1(6), basic2(7), gupiEncryptedMtaConfig(8), gupiMacMta(9), gupiEncryptedMacMta(10), gupiTftpSvrOverride(11) }currentThese are the various provisioning methods that are supported by the device.
CodecTypeINTEGER{ g711u(1), g711a(2), g7231(3), g729(4), g729a(5), g729e(6), g726(7), g728(8) }obsoleteThese are the various types of codecs that may be supported.
PacketizationPeriodTypeINTEGER{ ten(10), twenty(20), thirty(30) }obsoleteThe packetization periods supported by the PacketPort.
SignalingProtocolINTEGER{ none(0), ncs(1)}obsoleteThese are the various signaling protocols that may be supported.
MIB Viewer