ARRIS-QAM-DETECTION-MIB
14 objects
This MIB module supplies the basic proprietary management objects for the QAM Detection Feature
Imported Objects
| ARRIS-MIB | arrisProdIdCM |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.3.12 | IdentityarrisQamDetectionMib | This MIB module supplies the basic proprietary management objects for the QAM Detection Feature | ||
| 1.3.6.1.4.1.4115.1.3.12.1 | NodearrisQamDetectionMibObjects | |||
| 1.3.6.1.4.1.4115.1.3.12.1.1 | NodearrisQamDetectionConfig | |||
| 1.3.6.1.4.1.4115.1.3.12.1.1.1 | ScalararrisQamDetectionConfigEnable | read-write | current | This object is used to enable or disable the QAM Detection feature. |
| 1.3.6.1.4.1.4115.1.3.12.1.1.2 | TablearrisQamDetectionConfigFrequencyTable | not-accessible | current | This table contains the MIB table required to configure the QAM Detection Frequencies under test. |
| 1.3.6.1.4.1.4115.1.3.12.1.1.2.1 | RowarrisQamDetectionConfigFrequencyEntry | not-accessible | current | This table contains the MIB table required to configure the QAM Detection Frequencies under test. |
| 1.3.6.1.4.1.4115.1.3.12.1.1.2.1.1 | ColumnarrisQamDetectionConfigFrequencyIndex | not-accessible | current | Index used to order the arrisQamDetectionConfigFrequencyTable entries. |
| 1.3.6.1.4.1.4115.1.3.12.1.1.2.1.2 | ColumnarrisQamDetectionConfigFrequency | read-write | current | This object shows the frequency under test. Value can be set to 91000000 Hz - 999000000 Hz. Setting value to 0 will disable this frequency. |
| 1.3.6.1.4.1.4115.1.3.12.1.1.3 | ScalararrisQamDetectionConfigClearResults | read-write | current | This object is used to clear the QAM Detection results table. |
| 1.3.6.1.4.1.4115.1.3.12.1.2 | TablearrisQamDetectionResultsTable | not-accessible | current | This table contains all the MIB variables required for the QAM Detection Results. |
| 1.3.6.1.4.1.4115.1.3.12.1.2.1 | RowarrisQamDetectionResultsEntry | not-accessible | current | This table contains all the MIB variables required for the QAM Detection Results. |
| 1.3.6.1.4.1.4115.1.3.12.1.2.1.1 | ColumnarrisQamDetectionResultsIndex | not-accessible | current | Index used to order the arrisQamDetectionResultsTable entries. |
| 1.3.6.1.4.1.4115.1.3.12.1.2.1.2 | ColumnarrisQamDetectionResultsFreq | read-only | current | This object shows a frequency where a QAM signal was detected. |
| 1.3.6.1.4.1.4115.1.3.12.1.2.1.3 | ColumnarrisQamDetectionResultsTimestamp | read-only | current | This object shows the time and date of when a QAM signal was detected. |