ARRIS-ROUTER-DEVICE-MIB
938 objects
This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS eRouter/router devices.
Imported Objects
| ARRIS-MIB | arrisProdIdRouter |
| DIFFSERV-DSCP-TC | DscpOrAny |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv6 InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress PhysAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.20.1 | IdentityarrisRouterMib | of | This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS eRouter/router devices. | |
| 1.3.6.1.4.1.4115.1.20.1.1 | NodearrisRouterMibObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1 | NodearrisRouterWanConfig | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.1 | ScalararrisRouterWanConnType | read-write | current | The type of Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.2 | ScalararrisRouterWanConnHostName | read-write | current | The host name |
| 1.3.6.1.4.1.4115.1.20.1.1.1.3 | ScalararrisRouterWanConnDomainName | read-write | current | The domain name |
| 1.3.6.1.4.1.4115.1.20.1.1.1.4 | ScalararrisRouterWanMTUSize | read-write | current | The MTU size for the Wan connection. Specify 0 for auto-set |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7 | TablearrisRouterWanCurrentTable | not-accessible | current | Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1 | RowarrisRouterWanCurrentEntry | not-accessible | current | Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.1 | ColumnarrisRouterWanCurrentIPIndex | not-accessible | current | Index currently limit to 4. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.2 | ColumnarrisRouterWanCurrentIPAddrType | read-only | current | Static IP address type for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.3 | ColumnarrisRouterWanCurrentIPAddr | read-only | current | Static IP address for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.4 | ColumnarrisRouterWanCurrentPrefix | read-only | current | Netmask (prefix) for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.5 | ColumnarrisRouterWanCurrentGWType | read-only | current | Gateway address type for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.6 | ColumnarrisRouterWanCurrentGW | read-only | current | Gateway address for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.7 | ColumnarrisRouterWanCurrentIPType | read-only | current | Type of IP address. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.8 | ColumnarrisRouterWanCurrentNetMask | read-only | current | The netmask for the WAN connection if it is IPv4. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.9 | ColumnarrisRouterWanCurrentPrefixDelegationV6 | read-only | current | The prefix, or initial bits of the address, given to the router to delegate to its attached CPEs. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.10 | ColumnarrisRouterWanCurrentPrefixDelegationV6Len | read-only | current | The length for the prefix to be delegated to attached CPEs. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.11 | ColumnarrisRouterWanCurrentPreferredLifetimeV6 | read-only | current | The preferred lifetime for the assigned IPv6 address of the router. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.7.1.12 | ColumnarrisRouterWanCurrentValidLifetimeV6 | read-only | current | The valid lifetime for the assigned IPv6 address of the router. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.8 | ScalararrisRouterWanStaticFreeIdx | read-only | current | The lowest available index which can be used to create a new row/instance in arrisRouterWanStaticTable. A valid index is in the range [1..4]. If zero (0) is re… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9 | TablearrisRouterWanStaticTable | not-accessible | current | Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1 | RowarrisRouterWanStaticEntry | not-accessible | current | Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.1 | ColumnarrisRouterWanStaticIPIndex | not-accessible | current | Index currently limit to 4. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.2 | ColumnarrisRouterWanStaticIPAddrType | read-create | current | Static IP address type for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.3 | ColumnarrisRouterWanStaticIPAddr | read-create | current | Static IP address for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.4 | ColumnarrisRouterWanStaticPrefix | read-create | current | Netmask (prefix) for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.5 | ColumnarrisRouterWanStaticGatewayType | read-create | current | Gateway address type for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.6 | ColumnarrisRouterWanStaticGateway | read-create | current | Gateway address for Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.7 | ColumnarrisRouterWanStaticRowStatus | read-create | current | RowStatus used to add/remove rows from the table |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.8 | ColumnarrisRouterWanDelegatedPrefixLength | read-create | current | Length of IPV6 delegated prefix. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.9.1.9 | ColumnarrisRouterWanDelegatedPrefix | read-create | current | IPV6 delegated prefix. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10 | NodearrisRouterWanTunnelObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.1 | ScalararrisRouterWanUserName | read-write | current | Tunnel Wan connection login user name (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.2 | ScalararrisRouterWanPassword | read-write | current | Tunnel Wan connection login password (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.3 | ScalararrisRouterWanEnableIdleTimeout | read-write | current | Idle timeout enabled? (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.4 | ScalararrisRouterWanIdleTimeout | read-write | current | Idle timeout value for tunnel connection (LLTP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.5 | ScalararrisRouterWanTunnelAddrType | read-write | current | Address type of tunnel server. (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.6 | ScalararrisRouterWanTunnelAddr | read-write | current | Address of tunnel server. (L2TP) Either the IP address or the host name is required. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.7 | ScalararrisRouterWanTunnelHostName | read-write | current | Hostname of the tunnel server. (L2TP) Either the IP address or the host name is required. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.8 | ScalararrisRouterWanEnableKeepAlive | read-write | current | KeepAlive timeout enabled? (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.10.9 | ScalararrisRouterWanKeepAliveTimeout | read-write | current | KeepAlive timeout value (L2TP) |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11 | NodearrisRouterWanDNSObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.1 | ScalararrisRouterWanUseAutoDNS | read-write | current | Use automatic DNS servers as specified by ISP and DHCP. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.2 | TablearrisRouterWanCurrentDNSTable | not-accessible | current | Table contains the IP addresses of the current DNS servers. These may be dynamically obtained from the WAN DHCP server or these may have been statically config… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1 | RowarrisRouterWanCurrentDNSEntry | not-accessible | current | Table contains the IP addresses of the current DNS servers. These may be dynamically obtained from the WAN DHCP server or these may have been statically config… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.1 | ColumnarrisRouterWanCurrentDNSIPIndex | not-accessible | current | Index which also indicates the order/priority for DNS lookups. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.2 | ColumnarrisRouterWanCurrentDNSIPAddrType | read-only | current | Type of the IP address of the DNS server |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.3 | ColumnarrisRouterWanCurrentDNSIPAddr | read-only | current | The IP address of the DNS server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4 | TablearrisRouterWanStaticDNSTable | not-accessible | current | Table contains the IP addresses of the DNS servers that have been statically assigned. This table may be empty if arrisRouterWanUseAutoDNS is set to true |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1 | RowarrisRouterWanStaticDNSEntry | not-accessible | current | Table contains the IP addresses of the DNS servers that have been statically assigned. This table may be empty if arrisRouterWanUseAutoDNS is set to true |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.1 | ColumnarrisRouterWanStaticDNSIPIndex | not-accessible | current | Index which also indicates the order/priority for DNS lookups. There is a limit of 8 rows. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.2 | ColumnarrisRouterWanStaticDNSIPAddrType | read-create | current | Type of the IP address of the DNS server |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.3 | ColumnarrisRouterWanStaticDNSIPAddr | read-create | current | The IP address of the DNS server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.4 | ColumnarrisRouterWanStaticDNSRowStatus | read-create | current | The rowstatus used to add and remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12 | NodearrisRouterWanDHCPObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.1 | ScalararrisRouterWanRenewLease | read-write | current | Set to apply(1) to renew the primary public Wan DHCP lease |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.2 | ScalararrisRouterWanReleaseLease | read-write | current | Set to apply(1) to release the primary public Wan DHCP lease |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.3 | ScalararrisRouterWanDHCPDuration | read-only | current | The number of seconds that the current Wan DHCP lease is valid. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.4 | ScalararrisRouterWanDHCPExpire | read-only | current | The date and time when the current Wan DHCP lease expires. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.5 | ScalararrisRouterWanRenewLeaseV6 | read-write | current | IPV6 Set to apply(1) to renew the primary public Wan DHCP lease |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.6 | ScalararrisRouterWanReleaseLeaseV6 | read-write | current | IPV6 Set to apply(1) to release the primary public Wan DHCP lease |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.7 | ScalararrisRouterWanDHCPDurationV6 | read-only | current | IPV6 The number of seconds that the current Wan DHCP lease is valid. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.8 | ScalararrisRouterWanDHCPExpireV6 | read-only | current | IPV6 The date and time when the current Wan DHCP lease expires. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.9 | ScalararrisRouterWanDhcpSrvIPAddr | read-only | current | The IP address of the DHCP server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.10 | ScalararrisRouterWanDhcpOpt43Sub02 | read-write | current | DHCP Option 43 Sub-option 2 content. When set the value to 'erouter(0)', the Option 43 Sub-option 2 content will be 'EROUTER' at the DHCPDISCOVER packet; When … |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.11 | ScalararrisRouterWanDHCPDUIDV6 | read-only | current | The DHCP Unique ID (DUID) of the WAN DHCP Client. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.12 | ScalararrisRouterWanDHCPSrvAddrV6 | read-only | current | The IPv6 address of the accepted DHCPv6 server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.12.13 | ScalararrisRouterWanDHCPSrvDUIDV6 | read-only | current | The DHCP Unique ID (DUID) of the accepted DHCPv6 server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.13 | ScalararrisRouterWanIFMacAddr | read-only | current | The MAC address of the WAN interface. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.16 | ScalararrisRouterWanConnTypeV6 | read-write | current | IPV6 type of Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.17 | ScalararrisRouterWanIPProvMode | read-write | current | eRouter initialization mode. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18 | NodearrisRouterDSLiteWanObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.1 | ScalararrisRouterDSLiteWanEnable | read-write | current | IPV6 Enable or disable the DSLite. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.2 | ScalararrisRouterDSLiteWanLSNATAddrType | read-write | current | Address type of LSNAT. IPV6 or FQDN. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.3 | ScalararrisRouterDSLiteWanLSNATAddr | read-write | current | IPV6 The IP address of the LSNAT server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.4 | ScalararrisRouterDSLiteTcpMssClamping | read-write | current | Turn on/off (TCP) MSS clamping for ipv6 tunnel. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.5 | ScalararrisRouterDSLiteTcpMssValue | read-write | current | TCP Mss value for ipv6 tunnel |
| 1.3.6.1.4.1.4115.1.20.1.1.1.18.6 | ScalararrisRouterDSLiteWanResolvedAddr | read-only | current | Resolved IPV6 address of the LSNAT server. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19 | NodearrisRouterSoftGreWanObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1 | TablearrisRouterSoftGreWanTable | not-accessible | current | Table contains information for a specific SoftGreWan |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1 | RowarrisRouterSoftGreWanEntry | not-accessible | current | Table contains information for a specific SoftGreWan. ONLY Index of 1 currently Supported! |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.1 | ColumnarrisRouterSoftGreWanEnable | read-write | current | Enable or disable the SoftGRE WiFi Hotspot Client. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.2 | ColumnarrisRouterSoftGreMappedInterface | read-write | current | Name of the member physical network interface (or virtual network interface in the case of a wireless SSID) comprising the logical interface, aka LAN subnet. T… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.3 | ColumnarrisRouterSoftGreMaxSessions | read-write | current | The maximum number of roaming devices for this AP Setting the number of concurrent SoftGre client sessions to 0 must cause the following actions to be performe… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.4 | ColumnarrisRouterSoftGreWanControllerFqdn | read-write | current | The FQDN of the WLAN GW that will terminate tunnels from this AP. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.5 | ColumnarrisRouterSoftGreWanControllerProvisionedSecondaryIpAddressType | read-write | current | The type of internet address used for the secondary WLAN GW that will terminate tunnels from this AP. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.6 | ColumnarrisRouterSoftGreWanControllerProvisionedSecondaryIpAddress | read-write | current | The IP address of the secondary WLAN GW that will terminate tunnels from this AP. If the arrisRouterSoftGreWanControllerFqdn is FQDN format, this value will be… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.7 | ColumnarrisRouterSoftGreWanFailoverPingCount | read-write | current | Number of ICMP Pings sent at a regular interval for WLAN GW reachability health check |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.8 | ColumnarrisRouterSoftGreWanFailoverPingInterval | read-write | current | Configured interval in seconds between WLAN GW reachability health checks |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.9 | ColumnarrisRouterSoftGreWanFailoverThreshold | read-write | current | Number of consecutive un-acknowledged pings before it is determined that the current WLAN GW is no longer available and will fail-over to another WLAN GW if th… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.10 | ColumnarrisRouterSoftGreCircuitIdEnabled | read-write | current | Enable or disable the SoftGRE Circuit ID being added to DHCP |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.11 | ColumnarrisRouterSoftGreRemoteIdEnabled | read-write | current | Enable or disable the SoftGRE RemoteId being added to DHCP |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.12 | ColumnarrisRouterSoftGreRadiusEnabled | read-write | current | Enable or disable Radius Authentication for the SoftGRE Tunnel |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.13 | ColumnarrisRouterSoftGreRadiusServerAddressType | read-write | current | The type of internet address used for arrisRouterRadiusAddress. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.14 | ColumnarrisRouterSoftGreRadiusServerAddress | read-write | current | The internet address of the RADIUS server for this service set. If not specified and Radius Enabled, will default to WLAN GW |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.15 | ColumnarrisRouterSoftGreRadiusServerPort | read-write | current | The UDP port used to communicate with the RADIUS server for this service set. Defaults to Port 1812 |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.16 | ColumnarrisRouterSoftGreRadiusKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.17 | ColumnarrisRouterSoftGreRadiusReAuthInterval | read-write | current | The network re-authentication interval. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.18 | ColumnarrisRouterSoftGreVlanQEnable | read-write | current | Enable or disable the VLan Q tag being added to the packet |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.19 | ColumnarrisRouterSoftGreWanDscp | read-write | current | This object allows the overwrite of the DSCP field per RFC 3260. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.20 | ColumnarrisRouterSoftGreWanDNSRetryTimer | read-write | current | Retry timer(seconds) triggered when HHG is unable to resolve the WLAN GW |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.21 | ColumnarrisRouterSoftGreWanCurrentControllerIPAddressType | read-only | current | The type of internet address used for current active Hotspot WLAN GW controller. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.22 | ColumnarrisRouterSoftGreWanCurrentControllerIPAddress | read-only | current | The internet address of current active Hotspot WLAN GW controller. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.23 | ColumnarrisRouterSoftGreWanPrimaryControllerIPAddressType | read-only | current | The type of internet address used for Primary Hotspot WLAN GW controller in DNS SRV record of FQDN. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.24 | ColumnarrisRouterSoftGreWanPrimaryControllerIPAddress | read-only | current | The internet address of Primary Hotspot WLAN GW controller in DNS SRV record of FQDN. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.25 | ColumnarrisRouterSoftGreWanSecondaryControllerIPAddressType | read-only | current | The type of internet address used for Secondary Hotspot WLAN GW controller in DNS SRV record of FQDN. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.26 | ColumnarrisRouterSoftGreWanSecondaryControllerIPAddress | read-only | current | The internet address of Secondary Hotspot WLAN GW controller in DNS SRV record of FQDN. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.27 | ColumnarrisRouterSoftGreWanStatus | read-only | current | This MIB object reports the current operational state of tunnel. The up(0) state indicates the interface is able to transmit and receive network traffic. The d… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.29 | ColumnarrisRouterSoftGreTransportInterface | read-write | current | The GRE tunnel local IP address, 0 for GW IP, 1 for CM IP. The address type must be same to the GRE tunnel server address configured by arrisRouterSoftGreWanCo… |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.30 | ColumnarrisRouterSoftGreRadiusTransportInterface | read-write | current | The RADIUS local IP address, 0 for GW IP, 1 for CM IP. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.31 | ColumnarrisRouterSoftGreAcctServerAddressType | read-write | current | The type of internet address used for arrisRouterSoftGreAcctServerAddress. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.32 | ColumnarrisRouterSoftGreAcctServerAddress | read-write | current | The internet address of the RADIUS accounting server for this service set. If not specified and Radius Enabled, will default to RADIUS authentication server |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.33 | ColumnarrisRouterSoftGreAcctServerPort | read-write | current | The UDP port used to communicate with the RADIUS accounting server for this service set. Defaults to Port 1813 |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.34 | ColumnarrisRouterSoftGreAcctKey | read-write | current | The RADIUS accounting key. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.35 | ColumnarrisRouterSoftGreAcctInterval | read-write | current | The RADIUS accounting interim update interval. If set to zero, no accounting update will be performed. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.36 | ColumnarrisRouterSoftGreRadiusSecondaryServerAddressType | read-write | current | The type of internet address used for arrisRouterRadiusSecondaryAddress. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.37 | ColumnarrisRouterSoftGreRadiusSecondaryServerAddress | read-write | current | The internet address of the Secondary RADIUS server for this service set. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.38 | ColumnarrisRouterSoftGreRadiusSecondaryServerPort | read-write | current | The UDP port used to communicate with the Secondary RADIUS server for this service set. Defaults to Port 1812 |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.39 | ColumnarrisRouterSoftGreRadiusSecondaryKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.40 | ColumnarrisRouterSoftGreRadiusSecondaryReAuthInterval | read-write | current | The network re-authentication interval of the Secondary RADIUS server. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.2 | TablearrisRouterSoftGreSSIDTable | not-accessible | current | Table contains information to be assigned per SSID across GRE tunnel. Table is 1 based |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1 | RowarrisRouterSoftGreSSIDEntry | not-accessible | current | Table contains the information to be assigned per SSID across GRE tunnel. Index is the SSID |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1.1 | ColumnarrisRouterSoftGreVLanId | read-write | current | The VLan ID to be used for this managed SSID. Set to zero to not use VLan |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1.2 | ColumnarrisRouterSoftGreVLanPriority | read-write | current | The VLan Priority to be used for this managed SSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.3 | ScalararrisRouterSoftGreCustomerOptOut | read-write | current | If the user has opted out of the service, setting this value to true the Gateway will ignore any of the provisioned HotSpot Configuration from the config file. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.19.5 | ScalararrisRouterSoftGreCapable | read-only | current | Indicates if the softGRE/Hotspot feature is available on this device. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20 | NodearrisRouterDHCPRelayAgentWanObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1 | TablearrisRouterDHCPRelayAgentSSIDTable | not-accessible | current | Table contains information to be assigned per SSID with DHCP Relay. Table is 1 based |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1 | RowarrisRouterDHCPRelayAgentSSIDEntry | not-accessible | current | Table contains the information to be assigned per SSID with DHCP Relay. Index is the SSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.1 | ColumnarrisRouterDHCPRelayAgentEnable | read-write | current | Enable or disable the DHCPRelayAgent. This DHCPRelayAgent feature is only working on bridge mode. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.2 | ColumnarrisRouterDHCPRelayAgentCircuitIdEnabled | read-write | current | Enable or disable the Circuit ID being added to DHCP |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.3 | ColumnarrisRouterDHCPRelayAgentRemoteIdEnabled | read-write | current | Enable or disable the RemoteId being added to DHCP |
| 1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.4 | ColumnarrisRouterDHCPRelayAgentOption60SSIDEnabled | read-write | current | Enable or disable the SSID name being inserted to the beginning of DHCP Option 60 |
| 1.3.6.1.4.1.4115.1.20.1.1.1.21 | NodearrisRouterWanTR181GatewayInfoObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.1.21.1 | ScalararrisRouterTR181GatewayManufacturerOUI | read-only | current | Organizationally unique identifier of the associated Internet Gateway Device. Possible patterns: - <Empty> (an empty string) - [0-9A-F]{6} |
| 1.3.6.1.4.1.4115.1.20.1.1.1.21.2 | ScalararrisRouterTR181GatewayProductClass | read-only | current | Identifier of the product class of the associated Internet Gateway Device. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.21.3 | ScalararrisRouterTR181GatewaySerialNumber | read-only | current | Serial number of the associated Internet Gateway Device. |
| 1.3.6.1.4.1.4115.1.20.1.1.1.22 | ScalararrisRouterWanForceIGMPVersion | read-write | current | Forces eRouter using the specific IGMP Version in the WAN side. see the Linux proc file /proc/sys/net/ipv4/conf/erouter0/force_igmp_version for reference |
| 1.3.6.1.4.1.4115.1.20.1.1.2 | NodearrisRouterLanConfig | |||
| 1.3.6.1.4.1.4115.1.20.1.1.2.2 | TablearrisRouterLanSrvTable | not-accessible | current | Table contains information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1 | RowarrisRouterLanSrvEntry | not-accessible | current | Table contains information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.1 | ColumnarrisRouterLanName | read-write | current | Textual name of this Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.2 | ColumnarrisRouterLanSubnetMaskType | read-create | current | Ip Address Type of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.3 | ColumnarrisRouterLanSubnetMask | read-create | current | Ip Address of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.4 | ColumnarrisRouterLanGatewayIpType | read-create | current | Ip Address Type of the Gateway for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.5 | ColumnarrisRouterLanGatewayIp | read-create | current | Ip Address of the Gateway for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.6 | ColumnarrisRouterLanGatewayIp2Type | read-create | current | Ip Address Type of the Gateway for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.7 | ColumnarrisRouterLanGatewayIp2 | read-create | current | Ip Address of the Gateway for a specific Network. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.8 | ColumnarrisRouterLanVLanID | read-write | current | The VLan ID to be used for this Lan. Set to zero to not use VLan |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.9 | ColumnarrisRouterLanUseDHCP | read-write | current | Enable or disable the local DHCP server on this VLan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.10 | ColumnarrisRouterLanStartDHCPType | read-write | current | The type of IP address for the start of the range of IP addresses to be handed out by this DHCP server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.11 | ColumnarrisRouterLanStartDHCP | read-write | current | The start of the range of IP addresses to be handed out by this DHCP server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.12 | ColumnarrisRouterLanEndDHCPType | read-write | current | The type of IP address for the end of the range of IP addresses to be handed out by this DHCP server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.13 | ColumnarrisRouterLanEndDHCP | read-write | current | The end of the range of IP addresses to be handed out by this DHCP server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.14 | ColumnarrisRouterLanLeaseTime | read-write | current | The length of the lease time for dynamic (DHCP) IP addresses handed out by this device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.15 | ColumnarrisRouterLanDomainName | read-write | current | Optional domain name for this lan |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.19 | ColumnarrisRouterLanRelayDNS | read-write | current | Enable or disable DNS relay |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.21 | ColumnarrisRouterLanPassThru | read-write | current | Get/set whether or not this Lan is in pass-thru mode or bridged/NAT. To put the device into non-bridged mode with routing and NAT disabled To put the device in… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.22 | ColumnarrisRouterLanFirewallOn | read-write | current | Get/set whether or not the firewall is applied to this Lan |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.23 | ColumnarrisRouterLanUPnPEnable | read-write | current | Get/set whether or not UPnP is enabled for this Lan |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.24 | ColumnarrisRouterLanCPEAging | read-write | current | The timeout period in seconds for aging out dynamically learned forwarding information. The default value of zero means do not age |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.25 | ColumnarrisRouterLanOverrideDNS | read-write | current | Enable or disable DNS override. If DNS override is true the IP addresses in arrisRouterLanDNSTable will be passed to LAN clients via DHCP. Otherwise, the DNS s… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.26 | ColumnarrisRouterLanNatAlgsEnabled | read-write | current | Specifies which NAT application layer gateway supplements are enabled on this device. The default value for this object is for all ALG's to be enabled. Reserve… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.27 | ColumnarrisRouterLanMappedInterface | read-write | current | Name of the member physical network interface (or virtual network interface in the case of a wireless SSID) comprising the logical interface, aka LAN subnet. T… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.28 | ColumnarrisRouterLanEnvironmentControl | read-write | current | Controls whether or not the settings which define the operating environment of the logical interface, aka LAN subnet, are changeable via the GUI. When equal to… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.29 | ColumnarrisRouterLanPrefixLengthV6 | read-only | current | IPV6 The length indicating the routable portion of the prefix. This length is advertised to the host either through DHCP or router advertisement. The host uses… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.30 | ColumnarrisRouterLanUseDHCPV6 | read-write | current | IPV6 Enable or disable the local DHCPv6 server on this VLan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.31 | ColumnarrisRouterLanStartDHCPV6 | read-write | current | IPV6 The start of the range of IP addresses to be handed out by this DHCP server. NOTE - Only 128 - prefix_length(arrisRouterLanPrefixLengthV6) bits should be … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.32 | ColumnarrisRouterLanEndDHCPV6 | read-write | current | IPV6 The end of the range of IP addresses to be handed out by this DHCP instace. NOTE - Only 128 - prefix_length(arrisRouterLanPrefixLengthV6) bits should be c… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.33 | ColumnarrisRouterLanLeaseTimeV6 | read-write | current | IPV6 lease time for dynamic (DHCP) IP addresses handed out by this DHCP server. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.34 | ColumnarrisRouterLanLinkLocalAddressV6 | read-write | current | IPV6 Link local IPV6 address |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.35 | ColumnarrisRouterLanDNSRelayV6 | read-write | current | IPV6 Enable or disable DNS relay. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.36 | ColumnarrisRouterLanDNSOverrideV6 | read-write | current | IPV6 Enable or disable DNS override. If DNS override is true the IPv6 addresses in arrisRouterLanDNSTable will be passed to LAN clients via DHCPv6. Otherwise, … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.37 | ColumnarrisRouterLanPreProvLeaseTime | read-write | current | The length of the lease time for dynamic (DHCP) IP addresses handed out by this device prior to Gateway provisioning. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.2.1.39 | ColumnarrisRouterLanParentalControlsEnable | read-write | current | Enable or disable the Parent Control to this subnet. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3 | TablearrisRouterLanDNSTable | not-accessible | current | Table contains DSN server information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3.1 | RowarrisRouterLanDNSEntry | not-accessible | current | Table contains DNS server information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3.1.1 | ColumnarrisRouterLanDNSIdx | not-accessible | current | Table index, also corresponds to the order/priority of the DNS servers for lookups. Current implementation only supports 3 IPv4 and 3 IPv6 DNS servers |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3.1.2 | ColumnarrisRouterLanDNSIPAddrType | read-create | current | Internet address type for the DNS server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3.1.3 | ColumnarrisRouterLanDNSIPAddr | read-create | current | Internet address for the DNS server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.3.1.4 | ColumnarrisRouterLanDNSRowStatus | read-create | current | RowStatus used to add or remove DNS row entries |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4 | NodearrisRouterClientObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.1 | ScalararrisRouterLanClientCount | read-only | current | Current count of clients on this Lan. This corresponds to the number of rows in arrisRouterLanClientTable |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2 | TablearrisRouterLanClientTable | not-accessible | current | Table contains the set of DHCP clients for this Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1 | RowarrisRouterLanClientEntry | not-accessible | current | Table contains the set of DHCP clients for this Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.1 | ColumnarrisRouterLanClientIPAddrType | not-accessible | current | Current IP address type for the DHCP client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.2 | ColumnarrisRouterLanClientIPAddr | not-accessible | current | Current IP address for the DHCP client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.3 | ColumnarrisRouterLanClientHostName | read-create | current | Hostname for the DHCP client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.4 | ColumnarrisRouterLanClientMAC | read-create | current | MAC address of the DHCP client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.6 | ColumnarrisRouterLanClientAdapterType | read-only | current | The type of the adapter. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.7 | ColumnarrisRouterLanClientType | read-only | current | Type of IP address. Value list: 1: unknown(0) ( No client should use this value) 2: dynamic(1) ( The client IP address is in DHCPv6 or DHCPv6 lease file, but i… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.9 | ColumnarrisRouterLanClientLeaseEnd | read-only | current | The time and date when this lease expires. If arrisRouterLanClientType is static this is meaningless and will return an unspecified date/time. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.13 | ColumnarrisRouterLanClientRowStatus | read-create | current | To create or remove static clients. It is not possible to remove rows that correspond to dynamic IP addresses. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.14 | ColumnarrisRouterLanClientOnline | read-only | current | Returns the if the client is currently online (connected/active) or offline. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.15 | ColumnarrisRouterLanClientComment | read-create | deprecated | Comment field for the client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.17 | ColumnarrisRouterLanClientManufacturerOUI | read-only | current | Organizationally unique identifier of the Device manufacturer as provided to the Gateway by the Device. Represented as a six hexadecimal-digit value using all … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.18 | ColumnarrisRouterLanClientSerialNumber | read-only | current | Serial number of the Device as provided to the Gateway by the Device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.19 | ColumnarrisRouterLanClientProductClass | read-only | current | Identifier of the class of product for which the Device's serial number applies as provided to the Gateway by the Device. If the Device does not provide a Prod… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.20 | ColumnarrisRouterLanClientDeviceName | read-only | current | Device name. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.24 | ColumnarrisRouterLanClientLastChange | read-only | current | Returns the time from last change state to now. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.25 | ColumnarrisRouterLanClientTimeConnected | read-only | current | Returns the time since connected in seconds. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3 | TablearrisRouterDeviceUpDownTable | not-accessible | current | This table contains information on when client devices connected to this Router are up and accessible. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1 | RowarrisRouterDeviceUpDownEntry | not-accessible | current | This table contains information on when client devices connected to this Router are up and accessible. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.1 | ColumnarrisRouterDeviceUpDownIndex | not-accessible | current | Index used to order the arrisRouterClientsUpDownTable entries. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.2 | ColumnarrisRouterDeviceUpDownMAC | read-only | current | MAC address of the client. This is used to index the table. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.3 | ColumnarrisRouterDeviceUpDownIPType | read-only | current | The IP address type for the client during the time period specified by this row. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.7 | ColumnarrisRouterDeviceUpDownStatus | read-create | current | This is ONLY used to remove rows/items from this table |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.4 | ScalararrisRouterLanCustomCount | read-only | current | Current count of custom mapping of LAN clients to friendly names and other attributes. This corresponds to the number of rows in arrisRouterLanClientCustomTable |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5 | TablearrisRouterLanCustomTable | not-accessible | current | Table contains the set of mapping of LAN clients to friendly names and other attributes. The table can be used to look up clients by IP address or MAC address … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1 | RowarrisRouterLanCustomEntry | not-accessible | current | Table contains the set of mapping of LAN clients to friendly names and other attributes. The table can be used to look up clients by IP address or MAC address … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.1 | ColumnarrisRouterLanCustomIdx | not-accessible | current | Index. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.2 | ColumnarrisRouterLanCustomMAC | read-create | current | MAC address of the client. This is used to index the table. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.3 | ColumnarrisRouterLanCustomIPAddrType | read-create | current | The IP address. This is optional but either the IP or MAC should be present. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.4 | ColumnarrisRouterLanCustomIPAddr | read-create | current | The IP address. This is optional but either the IP or MAC should be present. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.5 | ColumnarrisRouterLanCustomFriendName | read-create | current | The 'friendly' name for this client. The default is the host name. Users can edit this via a user interface. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.6 | ColumnarrisRouterLanCustomHostName | read-create | current | Hostname for the client. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.7 | ColumnarrisRouterLanCustomMACMfg | read-only | current | The manufacturer of the hardware adapter. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.8 | ColumnarrisRouterLanCustomComments | read-create | current | Additional comments. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.9 | ColumnarrisRouterLanCustomRowStatus | read-create | current | Set to true(1) to remove this device from the list/table |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8 | TablearrisRouterLanClientDHCPOptionsTable | not-accessible | current | Table contains the set of DHCP clients for this Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1 | RowarrisRouterLanClientDHCPOptionsEntry | not-accessible | current | Table contains the set of DHCP clients for this Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.1 | ColumnarrisRouterLanClientDHCPOptionsIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.2 | ColumnarrisRouterLanClientDHCPOptionsTag | read-only | current | DHCP Option Number |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.3 | ColumnarrisRouterLanClientDHCPOptionsValue | read-only | current | DHCP Option Value. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.4 | ColumnarrisRouterLanClientDHCPOptionsRowStatus | read-create | current | RowStatus used to add or remove DHCP Options row entries |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5 | NodearrisRouterRIPObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.1 | ScalararrisRouterRIPEnable | read-write | current | Enable/disable RIP authentication. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.2 | ScalararrisRouterRIPAuthEnable | read-write | current | Enable/disable RIP authentication and type. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.3 | ScalararrisRouterRIPReportTime | read-write | current | RIP reporting interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.4 | ScalararrisRouterRIPAuthKeyString | read-write | current | RIP authentication key. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.5 | ScalararrisRouterRIPAuthKeyID | read-write | current | RIP authentication key identifier. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.6 | ScalararrisRouterRIPIPAddrType | read-write | current | RIP destination IP address type. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.7 | ScalararrisRouterRIPIPAddr | read-write | current | RIP unicast reporting destination IP address. If this is configured to an ip address other than 0.0.0.0, then the RIP messaging ( which is generally multicaste… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.8 | ScalararrisRouterRIPPrefixLen | read-write | current | The prefix for the routed subnet. This value can be set or the value: arrisRouterRIPSubnetMask. For additional details see the description for: arrisRouterRIPR… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.9 | ScalararrisRouterRIPAuthKeyChain | read-write | current | RIP authentication key chain. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.10 | ScalararrisRouterRIPRoutedSubnetIPType | read-write | current | The IP address type for arrisRouterRIPRoutedNetIP |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.11 | ScalararrisRouterRIPRoutedSubnetIP | read-write | current | The specific network in the configured subnet that will be adverstised and routed. This feature allows for the configuration of a public LAN-side subnet of hos… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.12 | ScalararrisRouterRIPRoutedSubnetGWNetIPType | read-write | current | The IP address type for arrisRouterRIPRoutedNetIP |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.13 | ScalararrisRouterRIPRoutedSubnetGWNetIP | read-write | current | See the description of arrisRouterRIPRoutedNetIP. This is the Gateway IP address for the routable subnet. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.14 | ScalararrisRouterRIPRoutedSubnetMask | read-write | current | The subnet mask used for the routed subnet. This value will match arrisRouterRIPPrefixLen. Usually prefixes are used with IPv6 and Netmasks are used with IPv4. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.15 | ScalararrisRouterRIPRoutedSubnetEnabled | read-write | current | If this is enabled, then we will advertise the RIP routed subnet network IP address with the next hop as the CM IP address. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.16 | ScalararrisRouterRIPSendCMInterface | read-write | current | If this is true/enabled, then RIP advertisements will be sent via the CM IP interface. If this is false/disabled then RIP advertisements will be sent via the e… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.17 | ScalararrisRouterRIPRoutedSubnetDHCP | read-write | current | If this is true/enabled, then a DHCP server will be started on the device for the routed subnet. If this is false/disabled then the DHCP server will not be sta… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.5.18 | ScalararrisRouterRIPRoutedSubnetNAT | read-write | current | If this is true/enabled, then a the Routed Subnet will be NATed using the Gateway Ip Address If this is false/disabled then the NAT will be disabled for the ro… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.6 | ScalararrisRouterLanSettings | read-write | current | This always returns doNothing(0) when read. This applies settings for the primary LAN if applyPrimaryLan(1) is used. The network will be restarted. The network… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8 | TablearrisRouterLanEtherPortTable | not-accessible | current | Table contains configuration information for the physical Ethernet ports. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1 | RowarrisRouterLanEtherPortEntry | not-accessible | current | Table contains configuration information for the physical Ethernet ports. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.1 | ColumnarrisRouterLanEtherPortIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.2 | ColumnarrisRouterLanEtherPortIFIndex | read-only | current | Corresponding IF Index in the MIB-2 IFTable |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.3 | ColumnarrisRouterLanEtherPortEnabled | read-write | current | Get and set if this Ethernet port is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.4 | ColumnarrisRouterLanEtherPortDuplex | read-write | current | Get and set the duplex setting for this Ethernet port. The device may need to be rebooted to apply this settings |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.5 | ColumnarrisRouterLanEtherPortSpeed | read-write | current | Get and set the speed setting for this Ethernet port. This is the configured speed of the port if auto-negotiate is OFF. To query the actual current speed of t… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.6 | ColumnarrisRouterLanEtherPortAuto | read-write | current | Get and set the 'auto-negotiate' setting for this Ethernet port. If the port is set to 'autoNegotiate', the settings for 'arrisRouterLanEtherPortDuplex' and 'a… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.8.1.7 | ColumnarrisRouterLanEtherPortHasLink | read-only | current | Get if the Ethernet port has 'link' or not. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9 | NodearrisRouterRIPngObjects | |||
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.1 | ScalararrisRouterRIPngEnable | read-write | current | IPV6 Enable/disable RIPng . |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.2 | ScalararrisRouterRIPngAddr | read-write | current | IPV6 RIPng unicast reporting destination IP address. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.3 | ScalararrisRouterRIPngSubnetEnable | read-write | current | IPV6 Enable/disable RIPng subnet. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.4 | ScalararrisRouterRIPngRoutedSubnetAddr | read-write | current | IPV6 specific network in the configured subnet that will be adverstised and routed. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.5 | ScalararrisRouterRIPngRoutedSubnetPrefixLength | read-write | current | IPV6 rip prefix length |
| 1.3.6.1.4.1.4115.1.20.1.1.2.9.6 | ScalararrisRouterRIPngSendCMInterface | read-write | current | IPV6 If set to TRUE, then RIPng advertisements will be sent via the CM IP interface. If this set to FALSE, then RIP advertisements will be sent via the eRouter… |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11 | TablearrisRouterLanSrvDHCPOptionsTable | not-accessible | current | Table contains DHCP server option information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1 | RowarrisRouterLanSrvDHCPOptionsEntry | not-accessible | current | Table contains DHCP server option information for a specific Lan. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.1 | ColumnarrisRouterLanSrvDHCPOptionsIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.2 | ColumnarrisRouterLanSrvDHCPOptionsEnable | read-only | current | DHCP Option Enable |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.3 | ColumnarrisRouterLanSrvDHCPOptionsIPAddrType | read-only | current | Internet address type for the DHCP server |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.4 | ColumnarrisRouterLanSrvDHCPOptionsTag | read-only | current | DHCP Option Number |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.5 | ColumnarrisRouterLanSrvDHCPOptionsValue | read-only | current | DHCP Option Value. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.11.1.6 | ColumnarrisRouterLanSrvDHCPOptionsRowStatus | read-create | current | RowStatus used to add or remove DHCP Options row entries |
| 1.3.6.1.4.1.4115.1.20.1.1.2.13 | ScalararrisRouterLanMaxIPv6RAInterval | read-write | current | The maximum interval between IPv6 router advertisements. Must be positive and no less than minimum IPv6 RA interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.14 | ScalararrisRouterLanMinIPv6RAInterval | read-write | current | The minimum interval between IPv6 router advertisements. Must be positive and no more than maximum IPv6 RA interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.15 | ScalararrisRouterLanBridgeType | read-write | current | Control the behavior of switching NAT Mode among 'RoutedWithNAT', 'RoutedWithoutNAT' and 'Bridged' on LAN Setup WEB GUI page. subnetBridge(0): When switch NAT … |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16 | TablearrisRouterLanUSBPortTable | not-accessible | current | Table contains configuration information for the physical USB ports. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1 | RowarrisRouterLanUSBPortEntry | not-accessible | current | Table contains configuration information for the physical USB ports. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.1 | ColumnarrisRouterLanUSBPortIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.2 | ColumnarrisRouterLanUSBPortHasLink | read-only | current | Get whether the USB port has 'link' or not. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.3 | ColumnarrisRouterLanUSBPortDescr | read-only | current | Description of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.4 | ColumnarrisRouterLanUSBPortSerialNum | read-only | current | Serial number of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.5 | ColumnarrisRouterLanUSBPortSpeed | read-only | current | Get the speed for the USB port. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.6 | ColumnarrisRouterLanUSBPortManuf | read-only | current | Get manufacturer information of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.7 | ColumnarrisRouterLanUSBPortStorageNam | read-write | current | Get/Set storage name of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.8 | ColumnarrisRouterLanUSBPortFileSys | read-only | current | Get file system used by the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.9 | ColumnarrisRouterLanUSBPortSpaceAvail | read-only | current | Space available of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.10 | ColumnarrisRouterLanUSBPortTotalSpace | read-only | current | Total space of the connected USB device. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.11 | ColumnarrisRouterLanUsbPortFoldersFile | read-only | current | save file name, the file is used to save first-level folders on USB |
| 1.3.6.1.4.1.4115.1.20.1.1.2.16.1.12 | ColumnarrisRouterLanUSBPortDelStorage | read-write | current | Set to true to delete the USB storage. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17 | NodearrisRouterLanFileSharingObjs | |||
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.1 | ScalararrisRouterLanFilesharingEnable | read-write | current | enable/disable fire sharing |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.2 | ScalararrisRouterLanFilesharingDevName | read-write | current | network device name |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3 | TablearrisRouterLanFileSharingTable | not-accessible | current | Table contains the information of the sharing. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1 | RowarrisRouterLanFileSharingEntry | not-accessible | current | Table contains information of the sharing. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.1 | ColumnarrisRouterLanFilesharingIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.2 | ColumnarrisRouterLanFilesharingRowStatus | read-create | current | RowStatus used to add/remove rows from the table |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.3 | ColumnarrisRouterLanFilesharingUsbPort | read-create | current | USB port |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.4 | ColumnarrisRouterLanFilesharingDirectory | read-create | current | share directory |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.5 | ColumnarrisRouterLanFilesharingName | read-create | current | share name |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.6 | ColumnarrisRouterLanFilesharingEnableHttp | read-create | current | enable/disable http for this share |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.7 | ColumnarrisRouterLanFilesharingEnableFtp | read-create | current | enable/disable ftp for this share |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.8 | ColumnarrisRouterLanFilesharingVisibility | read-create | current | whether permit everyone to access the share |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.9 | ColumnarrisRouterLanFilesharingEveryOnePerm | read-create | current | everyone permission, it is available only when arrisRouterLanFilesharingVisibility is set to TRUE |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.10 | ColumnarrisRouterLanFilesharingDesc | read-create | current | description for the share |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4 | TablearrisRouterLanLocalUserTable | not-accessible | current | Table contains the user permissions for share . |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1 | RowarrisRouterLanLocalUserEntry | not-accessible | current | Table contains the user permissions for share. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.1 | ColumnarrisRouterLanLocalUserIdx | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.2 | ColumnarrisRouterLanLocalUserRowStatus | read-create | current | RowStatus used to add/remove rows from the table |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.3 | ColumnarrisRouterLanLocalUserName | read-create | current | Local user name |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.4 | ColumnarrisRouterLanLocalUserPasswd | read-create | current | Local user password |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.5 | TablearrisRouterLanFilesharingPermitTable | not-accessible | current | Table contains the user permissions for share . |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.5.1 | RowarrisRouterLanFilesharingPermitEntry | not-accessible | current | Table contains the user permissions for share. |
| 1.3.6.1.4.1.4115.1.20.1.1.2.17.5.1.1 | ColumnarrisRouterLanFilesharingPermitvalue | read-create | current | User permission, it is available only when arrisRouterLanFilesharingVisibility is set to FALSE |
| 1.3.6.1.4.1.4115.1.20.1.1.2.19 | ScalararrisRouterLanIPv6RALifetime | read-write | current | The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertM… |
| 1.3.6.1.4.1.4115.1.20.1.1.3 | NodearrisRouterWirelessCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.1 | ScalararrisRouterWiFiCountry | read-write | current | Wireless country code |
| 1.3.6.1.4.1.4115.1.20.1.1.3.2 | ScalararrisRouterWiFiChannel | read-write | current | Controls and reflects the current channel number (802.11g) or control channel (802.11n). If set to (0), the device will be put in auto-channel mode where it au… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.3 | ScalararrisRouterWiFiMode | read-write | current | Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.4 | ScalararrisRouterWiFiBGProtect | read-write | current | Controls and reflects the state of 54g protection. If set to true(1), the AP will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks.… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.5 | ScalararrisRouterWiFiBeaconInterval | read-write | current | Amount of time between beacon transmissions. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.6 | ScalararrisRouterWiFiDTIMInterval | read-write | current | Amount of time between Delivery Traffic Indication Messages. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.7 | ScalararrisRouterWiFiTxPreamble | read-write | current | This attribute, indicates whether the transfer preamble is long or short. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.8 | ScalararrisRouterWiFiRTSThreshold | read-write | current | The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake sha… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.9 | ScalararrisRouterWiFiFragmentThresh | read-write | current | This value specifies the maximum size of a packet before the data is fragmented into two or more packets |
| 1.3.6.1.4.1.4115.1.20.1.1.3.10 | ScalararrisRouterWiFiShortSlot | read-write | current | Enable short slot time.The amount of time a device waits after a collision before retransmitting a packet. You can increase throughput on 802.11g, 2.4-GHz radi… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.11 | ScalararrisRouterWiFiFrameBurst | read-write | current | Bursting may increase the throughput of link connection in certain conditions. This can result in the ability to support higher data throughput in mixed and un… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.12 | ScalararrisRouterWiFiEnableRadio | read-write | current | Enable or disable WiFi radio. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.14 | ScalararrisRouterWiFiShortRetryLimit | read-write | current | Get or set the retry limit of frames longer than the RTS threshold |
| 1.3.6.1.4.1.4115.1.20.1.1.3.15 | ScalararrisRouterWiFiLongRetryLimit | read-write | current | Get or set the retry limit of frames shorter than the RTS threshold |
| 1.3.6.1.4.1.4115.1.20.1.1.3.16 | ScalararrisRouterWiFiOutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. Now only percent25(25), percent50(50) and percent100(100) can be set, they are mapped to L… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21 | NodearrisRouterWiFi80211NSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.1 | ScalararrisRouterWiFi80211NBand | read-write | current | Determines which Band that we will be operating in. Either the 2.4G or the 5G Hz. This only applies to 802.11n mode. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.2 | ScalararrisRouterWiFiHTMCS | read-write | current | Get or set the 802.11n physical modulation coding scheme (MCS) rate. Forces the N Phy transmission rate for the AP to a particular speed. Each group of rates c… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.3 | ScalararrisRouterWiFiChannelBW | read-write | current | Determines which Band Width that we will be operating in. Either the 20MHz or the 40MHz. Note: This is for 802.11n mode only. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.4 | ScalararrisRouterWiFi80211NSideBand | read-write | current | Determines which side Band the channel will operate in. Note: This is for 802.11n mode only, this OID is dependent of what arrisRouterWiFiChannelBW is selected… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.5 | ScalararrisRouterWiFiHTMode | read-write | current | In mixed mode, each 802.11n transmission is always embedded in an 802.11a or 802.11g transmission. Green field will ingore some of the early standard, so 802.1… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.6 | ScalararrisRouterWiFiGuardInterval | read-write | current | Spacing between transmission of symbols in nanoseconds. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.8 | ScalararrisRouterWiFiDeclinePeerBA | read-write | current | Enable or disable rejection of peer BA-request. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.9 | ScalararrisRouterWiFiBlockAck | read-write | current | Enable or disable blocking of ACK (BA) during data transfer. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.10 | ScalararrisRouterWiFiNProtection | read-write | current | Set/read 802.11n protection setting. This is for OFDM protection for MIMO frames. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.21.11 | ScalararrisRouterWiFiAllow40MHzOnlyOperation | read-write | current | Allow the user to set 40 MHz only Wifi operation. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22 | TablearrisRouterBSSTable | not-accessible | current | Table contains settings for individual wireless networks (SSID). |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1 | RowarrisRouterBSSEntry | not-accessible | current | Table contains settings for individual wireless networks (SSID). |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.1 | ColumnarrisRouterBssID | read-only | current | The physical address associated with this service set |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.2 | ColumnarrisRouterBssSSID | read-write | current | The SSID for this BSS. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.3 | ColumnarrisRouterBssActive | read-write | current | Select to enable/make active this SSID |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.4 | ColumnarrisRouterBssSSIDBroadcast | read-write | current | Select to broadcast or not this SSID. It is somewhat more secure to NOT broadcast the SSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.5 | ColumnarrisRouterBssSecurityMode | read-write | current | The security mode. The arrisRouterWpsMode or arrisRouterWps50Mode will be set to disabled(0) when the primary SSID security mode set to wep(1). |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.6 | ColumnarrisRouterBssAccessMode | read-write | current | Controls what stations will be given access to the device. If set to allowAny(1), then any station will be allowed to connect. If set to restrictToList(2), the… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.7 | ColumnarrisRouterBssNetworkIsolate | read-write | current | If set to true, this service set will have access to the wide area internet, but will have restricted access to the local area network. If set to false, this s… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.8 | ColumnarrisRouterBssMACAccessCount | read-only | current | Current count of items in the MACAccessTable |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.9 | ColumnarrisRouterBssMACAccessClear | read-write | current | Set to clear(1) to clear the entire list of MAC addresses in arrisRouterMACAccessTable |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.10 | ColumnarrisRouterBSSArpAuditInterval | read-write | current | Sets the ARP audit interval for periodical checking all ARP entries under this SSID whether the entry is still valid. If set to zero, periodicical checking is … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.11 | ColumnarrisRouterBssMaxWifiClients | read-write | current | The maximum number of concurrent wifi clients for this AP. 0 means no limit |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.12 | ColumnarrisRouterBssWmmEnable | read-write | current | Enable/disable WMM(Wi-Fi Multimedia) based on SSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.13 | ColumnarrisRouterBssWmmAPSD | read-write | current | Enable/disable WMM APSD(Wi-Fi Multimedia Automatic Power Save Delivery) based on SSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.14 | ColumnarrisRouterBssActiveTimeout | read-write | current | Indicates the time and date when the BSS will be disabled. The configured time and date must be after the current TOD.The format is: dd/mm/yyyy-hh:mm.(e.g: 29/… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.15 | ColumnarrisRouterDefaultBssSSID | read-only | current | The default SSID (Service Set Identifier) set from the factory. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.22.1.16 | ColumnarrisRouterBssStaSteeringEnable | read-write | current | Enable/disable STA Steering for this BSS. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.23 | TablearrisRouterWEPTable | not-accessible | current | Table contains settings for wireless networks. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.23.1 | RowarrisRouterWEPEntry | not-accessible | current | Table contains settings for wireless networks. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.23.1.1 | ColumnarrisRouterWEPCurrentKey | read-write | current | Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the arrisRouterWEP64BitKeyTable if … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.23.1.2 | ColumnarrisRouterWEPEncryptionMode | read-write | current | Selects the WEP encryption method used by this service set. If set to wep64(1), then 64 bit WEP encryption will be used with the keys from the arrisRouterWEP64… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.24 | TablearrisRouterWEP64BitKeyTable | not-accessible | current | A table of 40 bit key values used when operating in WEP 64 mode. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.24.1 | RowarrisRouterWEP64BitKeyEntry | not-accessible | current | A key to be used by the row in the arrisRouterBSSTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.24.1.1 | ColumnarrisRouterWEP64BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.24.1.2 | ColumnarrisRouterWEP64BitKeyValue | read-create | current | A 40 bit key to be used when the corresponding instance of arrisRouterWiFiSecurityMode is set to wep(1) and the corresponding instance of arrisRouterWEPEncrypt… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.24.1.3 | ColumnarrisRouterWEP64BitKeyStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.25 | TablearrisRouterWEP128BitKeyTable | not-accessible | current | A table of 104 bit key values used when operating in WEP 128 mode. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.25.1 | RowarrisRouterWEP128BitKeyEntry | not-accessible | current | A key to be used by the row in the arrisRouterBSSTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.25.1.1 | ColumnarrisRouterWEP128BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.25.1.2 | ColumnarrisRouterWEP128BitKeyValue | read-create | current | A 104 bit key to be used when the corresponding instance of arrisRouterWiFiSecurityMode is set to wep(1) and the corresponding instance of arrisRouterWEPEncryp… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.25.1.3 | ColumnarrisRouterWEP128BitKeyStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26 | TablearrisRouterWPATable | not-accessible | current | A table used to configure settings related to the WPA security modes. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1 | RowarrisRouterWPAEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the arrisRouterBSSTable for which arrisRoute… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1.1 | ColumnarrisRouterWPAAlgorithm | read-write | current | Controls and reflects the WPA encryption mode used by the service set. The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either tkip(1) or aes(… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1.2 | ColumnarrisRouterWPAPreSharedKey | read-write | current | Sets the WPA Pre-Shared Key (PSK) used by this service set. This value MUST be either a 64 byte hexadecimal number, OR an 8 to 63 character ASCII string. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1.4 | ColumnarrisRouterWPAReAuthInterval | read-write | current | Sets the WPA Group reauthentication interval for this service set. If set to zero, it is disabled for this service set. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1.5 | ColumnarrisRouterWPAPreAuthEnable | read-write | current | Enable or disable WPA2 pre-authentication. In preauthentication, a WPA2 wireless client can perform an 802.1X authentication with other wireless access points … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.26.1.6 | ColumnarrisRouterDefaultWPAPreSharedKey | read-only | current | The default SSID (Service Set Identifier) set from the factory. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27 | TablearrisRouterRadiusTable | not-accessible | current | A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1 | RowarrisRouterRadiusEntry | not-accessible | current | An entry defining the RADIUS characteristics of an individual service set. A row exists in this table for each row in the arrisRouterBSSTable for which arrisRo… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1.1 | ColumnarrisRouterRadiusAddressType | read-write | current | The type of internet address used for arrisRouterRadiusAddress. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1.2 | ColumnarrisRouterRadiusAddress | read-write | current | The internet address of the RADIUS server for this service set. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1.3 | ColumnarrisRouterRadiusPort | read-write | current | The UDP port used to communicate with the RADIUS server for this service set. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1.4 | ColumnarrisRouterRadiusKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.27.1.5 | ColumnarrisRouterRadiusReAuthInterval | read-write | current | The network re-authentication interval. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28 | TablearrisRouterMACAccessTable | not-accessible | current | A table of MAC addresses which defines the MAC address based access restrictions for the system. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28.1 | RowarrisRouterMACAccessEntry | not-accessible | current | A row in the table which specifies a single MAC address for a given service set. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28.1.1 | ColumnarrisRouterMACAccessIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28.1.2 | ColumnarrisRouterMACAccessAddr | read-create | current | A MAC address of a station which will be allowed to connect to the service set if arrisRouterBssAccessMode is set to restrictToList(2), or forbidden if arrisRo… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28.1.3 | ColumnarrisRouterMACAccessStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.28.1.4 | ColumnarrisRouterMACAccessDeviceName | read-create | current | A name associated with device MAC which will be allowed to connect to the service set if arrisRouterBssAccessMode is set to restrictToList(2), or forbidden if … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29 | NodearrisRouterWMMCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.1 | ScalararrisRouterWMMEnable | read-write | current | Enable/disable WiFi MultiMedia (WMM) QOS support.. Note that this applies to only the primary (zero) Wireless network. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.2 | ScalararrisRouterWMMNoAck | read-write | current | This refers to the acknowledge policy used at the MAC level. Enabling no-acknowledgement can result in more efficient throughput but higher error rates in a no… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.3 | ScalararrisRouterWMMAPSD | read-write | current | Automatic Power Save Delivery is a more efficient power management method than legacy 802.11 Power Save Polling. Set the value here. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4 | TablearrisRouterWMMEDCAAPTable | not-accessible | current | A table of for setting WMM EDCA values for the access point. This affects traffic flowing from the access point to the client station |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1 | RowarrisRouterWMMEDCAAPEntry | not-accessible | current | A table of for setting WMM EDCA values for the access point. This affects traffic flowing from the access point to the client station |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.1 | ColumnarrisRouterWMMEDCAAPIndex | not-accessible | current | The index into the table will be one of the parameters: 1=ACBE (best effort), 2=ACBK (background), 3=ACVI (video), 4=ACVO (voice) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.2 | ColumnarrisRouterWMMEDCAAPCWmin | read-write | current | Minimum Contention Window. This parameter is input to the algorithm that determines the initial random backoff wait time (window) for retry of a transmission. … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.3 | ColumnarrisRouterWMMEDCAAPCWmax | read-write | current | Maximum Contention Window. The value specified here in the Maximum Contention Window is the upper limit for the doubling of the random backoff value. This doub… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.4 | ColumnarrisRouterWMMEDCAAPAIFSN | read-write | current | The Arbitration Inter-Frame Spacing Number specifies a wait time for data frames |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.5 | ColumnarrisRouterWMMEDCAAPTxOpBLimit | read-write | current | Transmission Opportunity for b mode is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium (WM). This value spec… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.6 | ColumnarrisRouterWMMEDCAAPTxOpAGLimit | read-write | current | Transmission Opportunity for A and G mode is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium (WM). This valu… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.7 | ColumnarrisRouterWMMEDCAAPAdmitCont | read-write | current | Enable/disable admission control for specific category of traffic. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.8 | ColumnarrisRouterWMMEDCAAPDiscardOld | read-write | current | Discard oldest packet first enable/disable. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30 | NodearrisRouterWPSCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.1 | ScalararrisRouterWpsMode | read-write | current | Get and set whether or not WiFi Protected Setup (WPS) is enabled or disabled. The WPS mode can't be set to enabled(1) when the primary SSID arrisRouterBssSecur… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.2 | ScalararrisRouterWpsConfigState | read-write | current | Get and set the WiFi Protected Setup (WPS) config state. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.3 | ScalararrisRouterWpsDevicePIN | read-write | current | Get or set the WiFi Protected Setup (WPS) device PIN. This is the PIN that is displayed to the user to input on their client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.4 | ScalararrisRouterWpsDeviceName | read-only | current | Name of this device |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.5 | ScalararrisRouterWpsModelName | read-only | current | Model Name |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.6 | ScalararrisRouterWpsMfg | read-write | current | Manufacturer string |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.7 | ScalararrisRouterWpsResultStatus | read-only | current | The result status of the most recent WPS operation. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.8 | ScalararrisRouterWpsStatus | read-only | current | Current status of the WPS subsystem. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.9 | ScalararrisRouterWpsConfigTimeout | read-write | current | Get and set whether the WiFi Protected Setup (WPS) uses timeout. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.10 | ScalararrisRouterWpsSTAPin | read-write | current | Set the WiFi Protected Setup (WPS) PIN for a new station/device. This is the PIN from a 'client' device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.11 | ScalararrisRouterWpsPushButton | read-write | current | Set to 'activatePushButton' to push the virtual button on the Access Point and start the WPS push-button process. Set to 'activePINCfg' to start the WPS PIN pr… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.14 | ScalararrisRouterWpsUUID | read-write | current | Sets WPS Universal Unique Identifier |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.15 | NodearrisRouterWPSMethodCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.15.1 | ScalararrisRouterWPSMethodLabel | read-write | current | Get and set whether or not WPS Label Method is enabled or disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.15.2 | ScalararrisRouterWPSMethodPIN | read-write | current | Get and set whether or not WPS PIN Method is enabled or disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.15.3 | ScalararrisRouterWPSMethodPushButton | read-write | current | Get and set whether or not WPS Push Button Method is enabled or disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.30.15.4 | ScalararrisRouterWPSMethodKeypad | read-write | current | Get and set whether or not WPS Keypad Method is enabled or disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.32 | ScalararrisRouterWiFiResetDefaults | read-write | current | Reset Wifi settings to default values. Use 'nothingToReset(0)' to indicate that nothing is to be reset. Use 'resetWifiDefaults(1)' to reset all Wireless Networ… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.34 | ScalararrisRouterWiFiCustomSSIDStr | read-write | current | A string used to customize the Service Set Idenitifer (SSID). The last 4 characters of the CM MAC address will automatically be appended to this string. This s… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.37 | ScalararrisRouterWiFiRadioControlMode | read-write | current | When equal to userControlled, no wireless radio settings will be changed as a result of receiving this element. Current setting will remain in effect. When equ… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39 | NodearrisRouterWiFiScan | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.1 | ScalararrisRouterWiFiStartScan | read-write | current | Start a WiFi scan. This will detect other WiFi Access Points in the vicinity of the Arris product. This is useful for technical support personnel so they may d… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.2 | ScalararrisRouterWiFiScanResult | read-only | current | Returns the current status of a WiFi scan. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3 | TablearrisRouterWiFiScanResultTable | not-accessible | current | A table of any WiFi Access points in the vicinity of the Arris product. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1 | RowarrisRouterWiFiScanResultEntry | not-accessible | current | A table of any WiFi Access points in the vicinity of the Arris product. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.1 | ColumnarrisRouterWiFiScanIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.2 | ColumnarrisRouterWiFiScanSSID | read-only | current | The SSID for the wireless access point (WAP) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.3 | ColumnarrisRouterWiFiScanChannel | read-only | current | The channel that the WAP is broadcasting on. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.4 | ColumnarrisRouterWiFiScanChannel2 | read-only | current | The secondary channel that the WAP is broadcasting on. This may be 0 if the AP is only using 1 channel. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.5 | ColumnarrisRouterWiFiScanRSSI | read-only | current | The Received Signal Strength Indication (RSSI) for the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.6 | ColumnarrisRouterWiFiScanNoise | read-only | current | The 'noise' meausured for the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.7 | ColumnarrisRouterWiFiScanMAC | read-only | current | The MAC identifier (AKA BSSID) of the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.8 | ColumnarrisRouterWiFiScanMfg | read-only | current | The manufacturuer of the detected WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.9 | ColumnarrisRouterWiFiScanSupportedRates | read-only | current | The supported rates of the WAP. i.e. 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.10 | ColumnarrisRouterWiFiScanOperatingStandards | read-only | current | The operating standards of the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.11 | ColumnarrisRouterWiFiScanSecurityModeEnabled | read-only | current | The security mode of the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.12 | ColumnarrisRouterWiFiScanOperatingChannelBandwidth | read-only | current | The operating channel bandwidth of the WAP. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42 | TablearrisRouterWiFiClientInfoTable | not-accessible | current | This table contains detailed information about currently connected wireless client devices. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1 | RowarrisRouterWiFiClientInfoEntry | not-accessible | current | Entry in the arrisRouterWiFiClientInfoTable. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.1 | ColumnarrisRouterWiFiClientInfoIndex | not-accessible | current | Index for the table. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.2 | ColumnarrisRouterWiFiClientInfoIPAddrType | read-only | current | Current IP address type for the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.3 | ColumnarrisRouterWiFiClientInfoIPAddr | read-only | current | Current IP address for the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.4 | ColumnarrisRouterWiFiClientInfoIPAddrTextual | read-only | current | A human-readable textual representation of the arrisRouterWiFiClientInfoIPAddr. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.5 | ColumnarrisRouterWiFiClientInfoHostName | read-only | current | Hostname for the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.6 | ColumnarrisRouterWiFiClientInfoMAC | read-only | current | MAC address of the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.7 | ColumnarrisRouterWiFiClientInfoMACMfg | read-only | current | The manufacturer of the hardware adapter on the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.8 | ColumnarrisRouterWiFiClientInfoStatus | read-only | current | The most recent known status of the wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.9 | ColumnarrisRouterWiFiClientInfoFirstSeen | read-only | current | The time, if known, when this client was first seen. For 'dynamic' clients, this will usually be when the first DHCP lease was given out to this client since t… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.10 | ColumnarrisRouterWiFiClientInfoLastSeen | read-only | current | The time, if known, when this client was most recently (last) seen. If the device has been disconnected or powered off this value will reflect that. If the dev… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.11 | ColumnarrisRouterWiFiClientInfoIdleTime | read-only | current | The number of seconds that this wireless client device has been idle. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.12 | ColumnarrisRouterWiFiClientInfoInNetworkTime | read-only | current | The number of seconds that this wireless client device has been in the network. This value will be reset when the wireless client device is disconnected or pow… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.13 | ColumnarrisRouterWiFiClientInfoState | read-only | current | A string representing the current connection state of this wireless client device. It will indicate if the device is: AUTHENTICATED, ASSOCIATED, and/or AUTHORI… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.14 | ColumnarrisRouterWiFiClientInfoFlags | read-only | current | A string representing the current various capability flags for this wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.15 | ColumnarrisRouterWiFiClientInfoTxPkts | read-only | current | The number packets transmitted from this wireless client device since it was last connected. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.16 | ColumnarrisRouterWiFiClientInfoTxFailures | read-only | current | The number transmit packet failures from this wireless client device since it was last connected. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.17 | ColumnarrisRouterWiFiClientInfoRxUnicastPkts | read-only | current | The number of unicast packets received by this wireless client device since it was last connected. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.18 | ColumnarrisRouterWiFiClientInfoRxMulticastPkts | read-only | current | The number of multicast/broadcast packets received by this wireless client device since it was last connected. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.19 | ColumnarrisRouterWiFiClientInfoLastTxPktRate | read-only | current | The transmission rate of the last packet transmitted from this wireless client device in kilobits-per-second. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.20 | ColumnarrisRouterWiFiClientInfoLastRxPktRate | read-only | current | The reception rate of the last packet received by this wireless client device in kilobits-per-second. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.21 | ColumnarrisRouterWiFiClientInfoRateSet | read-only | current | The supported rate set for this wireless client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.42.1.22 | ColumnarrisRouterWiFiClientInfoRSSI | read-only | current | The Received Signal Strength Indicator (RSSI) of the wireless client device. This value usually displays as a negative, so a value closer to zero indicates mor… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.43 | ScalararrisRouterWiFiPhysicalChannel | read-only | current | The current channel the WiFi is using. This may match arrisRouterWiFiChannel except when that value is auto(0). When the 'auto' mode is used, this OID will ret… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50 | NodearrisRouterWiFi50RadioSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.1 | ScalararrisRouterWiFi50Channel | read-write | current | Controls and reflects the current channel number on the 5.0 GHz radio (802.11 a/n). If set to (0), the device will be put in auto-channel mode where it automat… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.2 | ScalararrisRouterWiFi50Mode | read-write | current | Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.3 | ScalararrisRouterWiFi50BeaconInterval | read-write | current | Amount of time between beacon transmissions. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.4 | ScalararrisRouterWiFi50DTIMInterval | read-write | current | Amount of time between Delivery Traffic Indication Messages. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.5 | ScalararrisRouterWiFi50TxPreamble | read-write | current | This attribute, indicates whether the transfer preamble is long or short. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.6 | ScalararrisRouterWiFi50RTSThreshold | read-write | current | The RTS (Request to Send) Threshold indicates the number of bytes in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake sha… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.7 | ScalararrisRouterWiFi50FragmentThresh | read-write | current | This value specifies the maximum size of a packet before the data is fragmented into two or more packets. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.8 | ScalararrisRouterWiFi50ShortSlot | read-write | current | This returns whether or not the use of short slot timing mode is on or off (long). The amount of time a device waits after a collision before retransmitting a … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.9 | ScalararrisRouterWiFi50FrameBurst | read-write | current | Bursting may increase the throughput of link connection in certain conditions. This can result in the ability to support higher data throughput in mixed and un… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.10 | ScalararrisRouterWiFi50EnableRadio | read-write | current | Enable or disable 5 GHz WiFi radio. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.12 | ScalararrisRouterWiFi50ShortRetryLimit | read-write | current | Get or set the retry limit of frames longer than the RTS threshold. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.13 | ScalararrisRouterWiFi50LongRetryLimit | read-write | current | Get or set the retry limit of frames shorter than the RTS threshold. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.14 | ScalararrisRouterWiFi50OutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. Now only percent25(25), percent50(50) and percent100(100) can be set, they are mapped to L… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.15 | ScalararrisRouterWiFi50MulticastA | read-write | current | Get or set the multicast rate for 802.11a. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.16 | ScalararrisRouterWiFi50PhysicalChannel | read-only | current | The current channel the 5.0 GHz WiFi radio is using. This may match arrisRouterWiFiChannel except when that value is auto(0). When the 'auto' mode is used, thi… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20 | NodearrisRouterWiFi50NSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.1 | ScalararrisRouterWiFi50HTMCS | read-write | current | Get or set the 802.11n physical modulation coding scheme (MCS) rate. Forces the N Phy transmission rate for the AP to a particular speed. Each group of rates c… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.2 | ScalararrisRouterWiFi50ChannelBW | read-write | current | Determines which Band Width that we will be operating in. Either the 20MHz 40MHz or 80MHz. Note: This is for 802.11n mode only. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.3 | ScalararrisRouterWiFi50NSideBand | read-write | current | Determines which side Band the channel will operate in. Note: This is for 802.11n mode only, this OID is dependent on what arrisRouterWiFiChannelBW is selected… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.4 | ScalararrisRouterWiFi50HTMode | read-write | current | In mixed mode, each 802.11n transmission is always embedded in an 802.11a or 802.11g transmission. Green field will ingore some of the early standard, so 802.1… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.5 | ScalararrisRouterWiFi50GuardInterval | read-write | current | Spacing between transmission of symbols in nanoseconds. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.6 | ScalararrisRouterWiFi50AMSDUEnable | read-write | current | Aggregation of MAC Service Data Units (MSDUs) at the top of the MAC. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.7 | ScalararrisRouterWiFi50DeclinePeerBA | read-write | current | Enable or disable rejection of peer BA-request. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.8 | ScalararrisRouterWiFi50BlockAck | read-write | current | Enable or disable blocking of ACK (BA) during data transfer. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.20.9 | ScalararrisRouterWiFi50NProtection | read-write | current | Set/read 802.11n protection setting. This is for OFDM protection for MIMO frames. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.21 | ScalararrisRouterWiFi50HTTxStream | read-write | current | Set or get the stream number on which the wireless antenna transmits. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.22 | ScalararrisRouterWiFi50HTRxStream | read-write | current | Set or get the stream number on which the wireless antenna receives. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.23 | ScalararrisRouterWiFi50EnableSTBC | read-write | current | Enable or disable Space Time Block Coding. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.24 | ScalararrisRouterWiFi50EnableRDG | read-write | current | Enable or disable Reverse Direction Grant. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.25 | ScalararrisRouterWiFi50IGMPSnooping | read-write | current | Enable or disable IGMP snooping. When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.26 | ScalararrisRouterWiFi50BlockDFSChan | read-write | current | Used to enable or disable the inclusion of DFS channels when configured to auto-select channels. When enabled, it blocks DFS channels from being automatically … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.27 | ScalararrisRouterWiFi50RTSRetry | read-write | current | Set or get the 5.0GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB valu… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.50.28 | ScalararrisRouterWiFi50TxRetry | read-write | current | Set or get the 5.0GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB v… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.51 | ScalararrisRouterWiFiNumSSIDSupported | read-only | current | Number of SSIDs Supported |
| 1.3.6.1.4.1.4115.1.20.1.1.3.55 | ScalararrisRouterWiFiHTTxStream | read-write | current | Set or get the stream number on which the wireless antenna transmits. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.56 | ScalararrisRouterWiFiHTRxStream | read-write | current | Set or get the stream number on which the wireless antenna receives. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.57 | ScalararrisRouterWiFiEnableSTBC | read-write | current | Enable or disable Space Time Block Coding. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.58 | ScalararrisRouterWiFiEnableRDG | read-write | current | Enable or disable Reverse Direction Grant. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.59 | ScalararrisRouterWiFiIGMPSnooping | read-write | current | Enable or disable IGMP snooping. When enabled it prevents unnecessary multicast traffic to the ports which did not subscribe to the multicast stream. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.60 | ScalararrisRouterWiFiRTSRetry | read-write | current | Set or get the 2.4GHz RTS retry count. A non-zero value overrides the default RTS retry logic for single-client and multi-client. If non-zero then the MIB valu… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.61 | ScalararrisRouterWiFiTxRetry | read-write | current | Set or get the 2.4GHz Tx retry count. A non-zero value overrides the default data Tx retry logic for single-client and multi-client. If non-zero then the MIB v… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62 | NodearrisRouterWiFiPhysicalChannelStats | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.1 | ScalararrisRouterWiFiPhysicalChannelStatsEnable | read-write | current | Enable collection of the Physical Channel Statistics (per Radio) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.2 | ScalararrisRouterWiFiPhysicalChannelStatsMeasurementRate | read-write | current | Periodic Measurement Rate for specific measurements (seconds) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.3 | ScalararrisRouterWiFiPhysicalChannelStatsMeasurementInterval | read-write | current | Measurement interval for reporting statistics (seconds) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4 | TablearrisRouterChannelStatsMeasurementTable | not-accessible | current | Table contains measurements for individual radio interfaces. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1 | RowarrisRouterChannelStatsMeasurementEntry | not-accessible | current | Table contains measurements for individual radio interfaces. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.1 | ColumnarrisRouterChannelStatsMinNoiseFloor | read-only | current | The minimum noise floor (dBm) on the serving channel across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.2 | ColumnarrisRouterChannelStatsMaxNoiseFloor | read-only | current | The maximum noise floor(dBm) on the serving channel across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.3 | ColumnarrisRouterChannelStatsMedianNoiseFloor | read-only | current | The median noise floor (dBm) on the serving channel across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.4 | ColumnarrisRouterChannelStatsPacketsSent | read-only | current | Total number of packets transmitted out of the radio across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.5 | ColumnarrisRouterChannelStatsPacketsReceived | read-only | current | Total number of packets received on the radio across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.6 | ColumnarrisRouterChannelStatsCSTExceedPercent | read-only | current | Percentage of time the CST was exceeded across the radio across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.7 | ColumnarrisRouterChannelStatsActivityFactor | read-only | current | Percentage of air time the radio was actively utilizing the channel across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.8 | ColumnarrisRouterChannelStatsChannelUtilization | read-only | current | Percentage of time the medium was utilized on the channel across the measurement interval |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.9 | ColumnarrisRouterChannelStatsRetransmissionsMetric | read-only | current | Percentage of packets that had to be retransmitted the measurement interval |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.5 | TablearrisRouterChannelStatsRSSITable | not-accessible | current | Table contains a histogram of client RSSI Values across the measurement interval. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1 | RowarrisRouterChannelStatsRSSITableEntry | not-accessible | current | |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1.1 | ColumnarrisRouterChannelStatsRSSITableIndex | not-accessible | current | Index used to order the ChannelStatsRSSITable entries. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1.2 | ColumnarrisRouterChannelStatsRSSICount | read-only | current | The RSSI Count for this 'bin'. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63 | NodearrisRouterWMM50Cfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.1 | ScalararrisRouterWMM50Enable | read-write | current | Enable/disable WiFi MultiMedia (WMM) QOS support.. Note that this applies to only the primary (zero) Wireless network. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.2 | ScalararrisRouterWMM50NoAck | read-write | current | This refers to the acknowledge policy used at the MAC level. Enabling no-acknowledgement can result in more efficient throughput but higher error rates in a no… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.3 | ScalararrisRouterWMM50APSD | read-write | current | Automatic Power Save Delivery is a more efficient power management method than legacy 802.11 Power Save Polling. Set the value here. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4 | TablearrisRouterWMM50EDCAAPTable | not-accessible | current | A table of for setting WMM EDCA values for the access point. This affects traffic flowing from the access point to the client station |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1 | RowarrisRouterWMM50EDCAAPEntry | not-accessible | current | A table of for setting WMM EDCA values for the access point. This affects traffic flowing from the access point to the client station |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.1 | ColumnarrisRouterWMM50EDCAAPIndex | not-accessible | current | The index into the table will be one of the parameters: 1=ACBE (best effort), 2=ACBK (background), 3=ACVI (video), 4=ACVO (voice) |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.2 | ColumnarrisRouterWMM50EDCAAPCWmin | read-write | current | Minimum Contention Window. This parameter is input to the algorithm that determines the initial random backoff wait time (window) for retry of a transmission. … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.3 | ColumnarrisRouterWMM50EDCAAPCWmax | read-write | current | Maximum Contention Window. The value specified here in the Maximum Contention Window is the upper limit for the doubling of the random backoff value. This doub… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.4 | ColumnarrisRouterWMM50EDCAAPAIFSN | read-write | current | The Arbitration Inter-Frame Spacing Number specifies a wait time for data frames |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.5 | ColumnarrisRouterWMM50EDCAAPTxOpBLimit | read-write | current | Transmission Opportunity for b mode is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium (WM). This value spec… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.6 | ColumnarrisRouterWMM50EDCAAPTxOpAGLimit | read-write | current | Transmission Opportunity for A and G mode is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium (WM). This valu… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.7 | ColumnarrisRouterWMM50EDCAAPAdmitCont | read-write | current | Enable/disable admission control for specific category of traffic. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.8 | ColumnarrisRouterWMM50EDCAAPDiscardOld | read-write | current | Discard oldest packet first enable/disable. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.64 | ScalararrisRouterWiFiExtensionChannel | read-write | current | Set or get the 2.4GHz extension channel for 40MHz operation The value of extension channel depends on the arrisRouterWiFiChannel. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65 | NodearrisRouterWPS50Cfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.1 | ScalararrisRouterWps50Mode | read-write | current | Get and set whether or not WiFi Protected Setup (WPS) is enabled or disabled. The WPS mode can't be set to enabled(1) when the primary SSID arrisRouterBssSecur… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.2 | ScalararrisRouterWps50ConfigState | read-write | current | Get and set the WiFi Protected Setup (WPS) config state. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.3 | ScalararrisRouterWps50DevicePIN | read-write | current | Get or set the WiFi Protected Setup (WPS) device PIN. This is the PIN that is displayed to the user to input on their client device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.4 | ScalararrisRouterWps50DeviceName | read-only | current | Name of this device |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.5 | ScalararrisRouterWps50ModelName | read-only | current | Model Name |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.6 | ScalararrisRouterWps50Mfg | read-write | current | Manufacturer string |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.7 | ScalararrisRouterWps50ResultStatus | read-only | current | The result status of the most recent WPS operation. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.8 | ScalararrisRouterWps50Status | read-only | current | Current status of the WPS subsystem. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.9 | ScalararrisRouterWps50ConfigTimeout | read-write | current | Get and set whether the WiFi Protected Setup (WPS) uses timeout. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.10 | ScalararrisRouterWps50STAPin | read-write | current | Set the WiFi Protected Setup (WPS) PIN for a new station/device. This is the PIN from a 'client' device. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.11 | ScalararrisRouterWps50PushButton | read-write | current | Set to 'activatePushButton' to push the virtual button on the Access Point and start the WPS push-button process. Set to 'activePINCfg' to start the WPS PIN pr… |
| 1.3.6.1.4.1.4115.1.20.1.1.3.65.14 | ScalararrisRouterWps50UUID | read-write | current | Sets WPS Universal Unique Identifier |
| 1.3.6.1.4.1.4115.1.20.1.1.3.66 | ScalararrisRouterWifiLowInitRate | read-write | current | Set true will reduce data rate based on increasing packet error ratio. Set false will turn off this function.This MIB is for MTK 3352. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69 | NodearrisRouterWiFiBssStaSteering | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.1 | ScalararrisRouterWiFiBssStaSteeringReset | read-write | current | Remove all STA Steering Lists (Global) and reset Groups to defaults. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.2 | ScalararrisRouterWiFiBssStaSteeringDenyCount | read-write | current | Number of Association tries before allowing a STA to join a blocked BSS (Global config for all lists). |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.3 | ScalararrisRouterWiFiBssStaSteeringDenyWindow | read-write | current | Number of Seconds before Deny Count is reset (Global config for all lists). 0 = Deny Window is disabled |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4 | TablearrisRouterBssStaSteeringTable | not-accessible | current | Table containing BSS Steering Entries indexed by ifIndex. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1 | RowarrisRouterBssStaSteeringEntry | not-accessible | current | Table containing STA Steering BSS Group entries. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.1 | ColumnarrisRouterBssStaSteeringIndex | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.2 | ColumnarrisRouterBssStaSteeringTableClear | read-write | current | 0 - No Action 1 - Reset Table to defaults 2 - Clear ifIndex Client List |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.3 | ColumnarrisRouterBssStaSteeringTableDenyCount | read-create | current | Number of Association tries before allowing a STA to join another BSS (Local config for this list). |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.4 | ColumnarrisRouterBssStaSteeringTableDenyWindow | read-create | current | Number of Seconds before Deny Count is reset (local config for list). 0 = Deny Window is disabled |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.5 | ColumnarrisRouterBssStaSteeringTableStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5 | TablearrisRouterBssStaSteeringClientTable | not-accessible | current | Station Entries Applied to the BSS Group |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1 | RowarrisRouterBssStaSteeringClientEntry | not-accessible | current | Station Entries for the BSS Group |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.1 | ColumnarrisRouterBssStaSteeringClientIndex | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.2 | ColumnarrisRouterBssStaSteeringClientMacAddress | read-only | current | A MAC address of a station which has joined the BSS and should be steered to this BSS. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.3 | ColumnarrisRouterBssStaSteeringClientLastAssocTime | read-only | current | The date and time when this Client Last Associated. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.4 | ColumnarrisRouterBssStaSteeringClientOtherBssJoinedCount | read-only | current | Number of Times the Client was allowed to join another BSS |
| 1.3.6.1.4.1.4115.1.20.1.1.3.70 | ScalararrisRouterWiFiInterworkingIE | read-write | current | Enable or Disable the Interworking Informational Element for ALL BSSs on all radios. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.99 | NodearrisRouterAirtimeCtrlCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.3.99.1 | ScalararrisRouterAirtimeCtrlBSSIDEnable | read-write | current | Enable or disable the BSSID airtime management feature. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.99.2 | TablearrisRouterAirtimeCtrlBSSIDWeightTable | not-accessible | current | This table assigns bandwidth allocation percentage to the BSSID. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1 | RowarrisRouterAirtimeCtrlBSSIDWeightEntry | not-accessible | current | A row in the table of the arrisRouterAirtimeCtrlBSSIDMappingTable. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1.1 | ColumnarrisRouterAirtimeCtrlBSSIDWeightGuaranteedPercentage | read-write | current | The minimum percentage of airtime allocated to the BSSID during periods of congestion. |
| 1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1.2 | ColumnarrisRouterAirtimeCtrlBSSIDWeightMaximumPercentage | read-write | current | The maximum percentage of airtime allocated to the BSSID during periods of non-congestion. |
| 1.3.6.1.4.1.4115.1.20.1.1.4 | NodearrisRouterFWCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.1 | ScalararrisRouterFWEnabled | read-write | current | Is the firewall enabled or not |
| 1.3.6.1.4.1.4115.1.20.1.1.4.6 | ScalararrisRouterFWEnableDMZ | read-write | current | Enable/disable any configured DMZ host |
| 1.3.6.1.4.1.4115.1.20.1.1.4.7 | ScalararrisRouterFWIPAddrTypeDMZ | read-write | current | The IP address type of the DMZ host |
| 1.3.6.1.4.1.4115.1.20.1.1.4.8 | ScalararrisRouterFWIPAddrDMZ | read-write | current | The IP address of the DMZ host |
| 1.3.6.1.4.1.4115.1.20.1.1.4.9 | ScalararrisRouterFWSecurityLevel | read-write | current | This variable can be used to set a generic firewall 'level'. minimum: ALLOWS all incoming and outgoing connections except IDENT (port 113). medium: REJECTS all… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12 | TablearrisRouterFWVirtSrvTable | not-accessible | current | A table of 'virtual servers'. This allows for incoming requests on specific port numbers to reach web servers, FTP servers, mail servers, etc. so they can be a… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1 | RowarrisRouterFWVirtSrvEntry | not-accessible | current | A table of 'virtual servers'. This allows for incoming requests on specific port numbers to reach web servers, FTP servers, mail servers, etc. so they can be a… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.1 | ColumnarrisRouterFWVirtSrvIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.2 | ColumnarrisRouterFWVirtSrvDesc | read-create | current | A textual description or name for this virtual server, i.e. My FTP |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.3 | ColumnarrisRouterFWVirtSrvPortStart | read-create | current | The beginning of the port range to forward to this virtual server. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.4 | ColumnarrisRouterFWVirtSrvPortEnd | read-create | current | The end of the port range to forward to this virtual server. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.5 | ColumnarrisRouterFWVirtSrvProtoType | read-create | current | Specifies which protocol(s) are forwarded |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.6 | ColumnarrisRouterFWVirtSrvIPAddrType | read-create | current | Type of IP address on private network to forward to |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.7 | ColumnarrisRouterFWVirtSrvIPAddr | read-create | current | IP address on private network to forward to |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.9 | ColumnarrisRouterFWVirtSrvLocalPortStart | read-create | current | The beginning of the port range to forward to this virtual server. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.10 | ColumnarrisRouterFWVirtSrvLocalPortEnd | read-create | current | The end of the port range to forward to this virtual server. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.11 | ColumnarrisRouterFWVirtSrvRowStatus | read-create | current | Row status to add/remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.4.12.1.14 | ColumnarrisRouterFWSrvTr69InstanceID | read-create | current | The unique ID of Table |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13 | TablearrisRouterFWIPFilterTable | not-accessible | current | A table of IP addresses to filter to block internet traffic to specific devices on the network. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1 | RowarrisRouterFWIPFilterEntry | not-accessible | current | A table of IP addresses to filter to block internet traffic to specific devices on the network. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.1 | ColumnarrisRouterFWIPFilterIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.2 | ColumnarrisRouterFWIPFilterDesc | read-create | current | A textual description or name for this filtering rule/row |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.3 | ColumnarrisRouterFWIPFilterStartType | read-create | current | Type of IP address for beginning of range on private network to filter |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.4 | ColumnarrisRouterFWIPFilterStartAddr | read-create | current | Beginning of IP address range on private network to filter. To block ports on all IPs use 0.0.0.0 (IPv4) |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.5 | ColumnarrisRouterFWIPFilterEndType | read-create | current | Type of IP address for end of range on private network to filter |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.6 | ColumnarrisRouterFWIPFilterEndAddr | read-create | current | End of IP address range on private network to filter. To block ports on all IPs use 0.0.0.0 (IPv4) |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.7 | ColumnarrisRouterFWIPFilterPortStart | read-create | current | The beginning of the port range to filter. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.8 | ColumnarrisRouterFWIPFilterPortEnd | read-create | current | The end of the port range to filter. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.9 | ColumnarrisRouterFWIPFilterProtoType | read-create | current | Specifies which protocol(s) are filtered |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.10 | ColumnarrisRouterFWIPFilterTOD | read-create | current | This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule. Bits 0-6 correspond to Sunday-Saturday. Set the bit high (… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.11 | ColumnarrisRouterFWIPFilterRowStatus | read-create | current | Row status to add/remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.12 | ColumnarrisRouterFWIPFilterAction | read-create | current | Does rule allow or deny access |
| 1.3.6.1.4.1.4115.1.20.1.1.4.13.1.13 | ColumnarrisRouterFWIPFilterDirection | read-create | current | Does rule apply to incoming or outgoing packets |
| 1.3.6.1.4.1.4115.1.20.1.1.4.14 | ScalararrisRouterFWAllowAll | read-write | current | Set to true to allow all devices to connect to the network EXCEPT those in the arrisRouterFWMACFilteTable. Set to false to block all devices from connecting to… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15 | TablearrisRouterFWMACFilterTable | not-accessible | current | A table of MAC addresses which are filtered/blocked by the firewall. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15.1 | RowarrisRouterFWMACFilterEntry | not-accessible | current | A table of MAC addresses which are blocked or allowed by the firewall. The behavior depends on arrisRouterFWAllowAll. The ifIndex usually to be the Lan interfa… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15.1.1 | ColumnarrisRouterFWMACFilterIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15.1.2 | ColumnarrisRouterFWMACFilterAddr | read-create | current | A MAC address of a device on the local network which is filtered/blocked by the firewall. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15.1.3 | ColumnarrisRouterFWMACFilterTOD | read-create | current | This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule. Bits 0-6 correspond to Sunday-Saturday. Set the bit high (… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.15.1.4 | ColumnarrisRouterFWMACFilterRowStatus | read-create | current | Row status to add/remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16 | TablearrisRouterFWPortTrigTable | not-accessible | current | A table of port Trigs. This allows configuration of dynamic triggers to specific devices on the Lan This allows for special applications that require specific … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1 | RowarrisRouterFWPortTrigEntry | not-accessible | current | A table of port Trigs. This allows configuration of dynamic triggers to specific devices on the Lan This allows for special applications that require specific … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.1 | ColumnarrisRouterFWPortTrigIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.2 | ColumnarrisRouterFWPortTrigDesc | read-create | current | A textual description or name for this port trigger |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.3 | ColumnarrisRouterFWPortTrigPortStart | read-create | current | The beginning of the trigger port range. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.4 | ColumnarrisRouterFWPortTrigPortEnd | read-create | current | The end of the trigger port range. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.5 | ColumnarrisRouterFWPortTargPortStart | read-create | current | The beginning of the target port range. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.6 | ColumnarrisRouterFWPortTargPortEnd | read-create | current | The end of the target port range. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.7 | ColumnarrisRouterFWPortTrigProtoType | read-create | current | Specifies which protocol(s) are filtered |
| 1.3.6.1.4.1.4115.1.20.1.1.4.16.1.9 | ColumnarrisRouterFWPortTrigRowStatus | read-create | current | Row status to add/remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17 | NodearrisRouterFWFilterRules | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.6 | ScalararrisRouterFWBlockFragIPPkts | read-write | current | Enable/disable blocking of fragmented IP packets |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.7 | ScalararrisRouterFWPortScanProtect | read-write | current | Enable/disable port scan protection |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.8 | ScalararrisRouterFWIPFloodDetect | read-write | current | Enable/disable detection of IP floods |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.9 | ScalararrisRouterFWBlockFragIPPktsV4 | read-write | current | Enable/disable blocking of fragmented IPv4 packets. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arri… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.10 | ScalararrisRouterFWPortScanProtectV4 | read-write | current | Enable/disable IPv4 port scan protection. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arrisRouterFWB… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.11 | ScalararrisRouterFWIPFloodDetectV4 | read-write | current | Enable/disable detection of IPv4 floods. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arrisRouterFWBl… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.12 | ScalararrisRouterFWBlockFragIPPktsV6 | read-write | current | Enable/disable blocking of fragmented IPv6 packets. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arri… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.13 | ScalararrisRouterFWPortScanProtectV6 | read-write | current | Enable/disable IPv6 port scan protection. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arrisRouterFWB… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.17.14 | ScalararrisRouterFWIPFloodDetectV6 | read-write | current | Enable/disable detection of IPv6 floods. Six MIBs arrisRouterFWBlockFragIPPktsV4, arrisRouterFWPortScanProtectV4, arrisRouterFWIPFloodDetectV4, arrisRouterFWBl… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18 | NodearrisRouterFWDDNSObjs | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.1 | ScalararrisRouterFWDDNSEnable | read-write | current | Enable/disable dynamic DNS |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.2 | ScalararrisRouterFWDDNSType | read-write | current | Type of Dynamic DNS. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.3 | ScalararrisRouterFWDDNSUserName | read-write | current | User name to login to dynamic DNS service. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.4 | ScalararrisRouterFWDDNSPassword | read-write | current | Password to login to dynamic DNS service. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.5 | ScalararrisRouterFWDDNSDomainName | read-write | current | Domain nanme for dynamic DNS service. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.6 | ScalararrisRouterFWDDNSIPAddrType | read-only | current | Type for current DDNS IP address |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.7 | ScalararrisRouterFWDDNSIPAddr | read-only | current | Current DDNS IP address |
| 1.3.6.1.4.1.4115.1.20.1.1.4.18.8 | ScalararrisRouterFWDDNSStatus | read-only | current | String representing current status of DDNS service. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19 | NodearrisRouterFWFeatures | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.2 | ScalararrisRouterFWIPSecPassThru | read-write | current | Enable/disable IPSEC passthru. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.3 | ScalararrisRouterFWPPTPPassThru | read-write | current | Enable/disable PPTP passthru. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.4 | ScalararrisRouterFWEnableMulticast | read-write | current | Enable/disable multicast support. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.5 | ScalararrisRouterFWEnableRemoteMgmt | read-write | current | Enable/disable remote web management. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.7 | ScalararrisRouterFWL2TPPassThru | read-write | current | Enable/disable L2TP passthru. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12 | NodearrisRouterFWRemoteMgmt | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.1 | ScalararrisRouterFWRemoteMgmtHttp | read-write | current | Enable/disable WAN HTTP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.2 | ScalararrisRouterFWRemoteMgmtHttps | read-write | current | Enable/disable WAN HTTPs. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.3 | ScalararrisRouterFWRemoteMgmtHttpPort | read-write | current | WAN HTTP port |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.4 | ScalararrisRouterFWRemoteMgmtHttpsPort | read-write | current | WAN HTTPs port |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.5 | ScalararrisRouterFWRemoteMgmtAllowedType | read-write | current | WAN Allowed type |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.6 | ScalararrisRouterFWRemoteMgmtAllowedIPv4 | read-write | current | IPv4 address for WAN Allowed SignleComputer. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.7 | ScalararrisRouterFWRemoteMgmtAllowedIPv6 | read-write | current | IPv6 address for WAN Allowed SignleComputer. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.8 | ScalararrisRouterFWRemoteMgmtAllowedStartIPv4 | read-write | current | IPv4 start address for WAN Allowed RangeOfIP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.9 | ScalararrisRouterFWRemoteMgmtAllowedEndIPv4 | read-write | current | IPv4 end address for WAN Allowed RangeOfIP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.10 | ScalararrisRouterFWRemoteMgmtAllowedStartIPv6 | read-write | current | IPv6 start address for WAN Allowed RangeOfIP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.11 | ScalararrisRouterFWRemoteMgmtAllowedEndIPv6 | read-write | current | IPv6 end address for WAN Allowed RangeOfIP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.12.12 | ScalararrisRouterFWRemoteMgmtTelnet | read-write | current | Enable/disable WAN Telnet. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.19.13 | ScalararrisRouterFWSelectRemoteMgmt | read-write | current | Fireware select Remote Management vs WAN ACL to control GW IP. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20 | NodearrisRouterFWParentalControls | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.1 | ScalararrisRouterKeywordCount | read-only | current | Current count of keywords in blocktable. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.3 | ScalararrisRouterBlackListCount | read-only | current | Current count of black listed domains. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.5 | ScalararrisRouterWhiteListCount | read-only | current | Current count of White listed domains. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10 | TablearrisRouterKeywordBlkTable | not-accessible | current | A table of keywords to block when web surfing |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1 | RowarrisRouterKeywordBlkEntry | not-accessible | current | A table of keywords to block when web surfing |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.1 | ColumnarrisRouterKeywordBlkIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.2 | ColumnarrisRouterKeywordBlkWord | read-create | current | The keyword to block. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.3 | ColumnarrisRouterKeywordBlkTOD | read-create | current | This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule. Bits 0-6 correspond to Sunday-Saturday. Set the bit high (… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.4 | ColumnarrisRouterKeywordBlkStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12 | TablearrisRouterBlackListTable | not-accessible | current | A table of domain names to block when web surfing |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1 | RowarrisRouterBlackListEntry | not-accessible | current | A table of domain names to block when web surfing |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.1 | ColumnarrisRouterBlackListIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.2 | ColumnarrisRouterBlackListDomain | read-create | current | The domain to alway block - black listed. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.3 | ColumnarrisRouterBlackListTOD | read-create | current | This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule. Bits 0-6 correspond to Sunday-Saturday. Set the bit high (… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.4 | ColumnarrisRouterBlackListStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14 | TablearrisRouterWhiteListTable | not-accessible | current | A table of domains to NEVER block when web surfing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1 | RowarrisRouterWhiteListEntry | not-accessible | current | A table of domains to NEVER block when web surfing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.1 | ColumnarrisRouterWhiteListIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.2 | ColumnarrisRouterWhiteListDomain | read-create | current | The domain to alway allow - White listed. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.3 | ColumnarrisRouterWhiteListTOD | read-write | current | This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule. Bits 0-6 correspond to Sunday-Saturday. Set the bit high (… |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.4 | ColumnarrisRouterWhiteListStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16 | TablearrisRouterTrustedDeviceTable | not-accessible | current | A table of trusted devices which bypass parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1 | RowarrisRouterTrustedDeviceEntry | not-accessible | current | A table of trusted devices which bypass parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.1 | ColumnarrisRouterTrustedDeviceIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.2 | ColumnarrisRouterTrustedDeviceMAC | read-create | current | The MAC address of a device on the local network that bypasses parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.3 | ColumnarrisRouterTrustedDeviceStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.4 | ColumnarrisRouterTrustedDeviceName | read-create | current | The name of a device on the local network that bypasses parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.5 | ColumnarrisRouterTrustedDeviceAddrType | read-create | current | IP address type for a device on the local network that bypasses parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.6 | ColumnarrisRouterTrustedDeviceAddr | read-create | current | IP address for a device on the local network that bypasses parental controls. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.17 | ScalararrisRouterEnableParentalCont | read-write | current | Enable/disable parental controls |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.22 | ScalararrisRouterListActiveType | read-write | current | Current active list type. Default value is Black List. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.24 | ScalararrisRouterExceptionListCount | read-only | current | Current count of Exception listed domain. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.25 | TablearrisRouterExceptionListTable | not-accessible | current | A table of domains to NEVER block when web surfing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1 | RowarrisRouterExceptionListEntry | not-accessible | current | A table of domains to NEVER block when web surfing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.1 | ColumnarrisRouterExceptionListIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.2 | ColumnarrisRouterExceptionListDomain | read-create | current | The domain to allow which is blocked by keyword - Exception listed. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.3 | ColumnarrisRouterExceptionListStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.4.21 | ScalararrisRouterFWAllowICMP | read-write | current | Specify to allow or not allow ICMP messages such as Ping and trace route. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.32 | ScalararrisRouterFWVirtSrvTableEnabled | read-write | current | Indicates whether Port Forwarding is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.33 | ScalararrisRouterFWPortTrigTableEnabled | read-write | current | Indicates whether port triggering is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.40 | NodearrisRouterFWIPv6Security | |||
| 1.3.6.1.4.1.4115.1.20.1.1.4.40.7 | ScalararrisRouterFWIPv6Enable | read-write | current | Is the IPv6 firewall enabled or not |
| 1.3.6.1.4.1.4115.1.20.1.1.4.41 | ScalararrisRouterFWMacBridgingWebPageEnabled | read-write | current | Indicates whether MAC bridging web page displays for admin users. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.42 | ScalararrisRouterFWMacBridgingFunctionEnabled | read-write | current | Indicates whether MAC bridging function is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43 | TablearrisRouterFWMacBridgingTable | not-accessible | current | A table of bridged device MAC addresses. Packets from or to these MACs are bridged directly from LAN to WAN, bypassing the normal routing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43.1 | RowarrisRouterFWMacBridgingEntry | not-accessible | current | A table of MAC addresses. Device of these MACs in LAN are bridged directly from LAN to WAN, bypassing the normal routing. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43.1.1 | ColumnarrisRouterFWMacBridgingIndex | not-accessible | current | The index into the Mac Bridging table. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43.1.2 | ColumnarrisRouterFWMacBridgingName | read-create | current | A textual description or name for this MAC. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43.1.3 | ColumnarrisRouterFWMacBridgingMACAddr | read-create | current | The MAC Address of LAN Device to be bridged directly from LAN to WAN. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.43.1.4 | ColumnarrisRouterFWMacBridgingRowStatus | read-create | current | Row status to add/remove an arrisRouterFWMacBridgingTable entry. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.44 | TablearrisRouterFWPortAllowTable | not-accessible | current | A table to allow IPV6 client to receive tcp packets with specified port |
| 1.3.6.1.4.1.4115.1.20.1.1.4.44.1 | RowarrisRouterFWPortAllowEntry | not-accessible | current | A table to allow IPV6 client to receive tcp packets with specified port |
| 1.3.6.1.4.1.4115.1.20.1.1.4.44.1.1 | ColumnarrisRouterFWPortAllowIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.4.44.1.2 | ColumnarrisRouterFWPortAllowInboundPort | read-write | current | The inbound tcp port which allowed to forward to v6 client |
| 1.3.6.1.4.1.4115.1.20.1.1.4.44.1.3 | ColumnarrisRouterFWPortAllowRowStatus | read-create | current | Row status to add/remove rows |
| 1.3.6.1.4.1.4115.1.20.1.1.4.46 | ScalararrisRouterFWSrvTr69LastInstance | read-write | current | A count indicates that how many instance TR-069 create. |
| 1.3.6.1.4.1.4115.1.20.1.1.5 | NodearrisRouterSysCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.1 | ScalararrisRouterAdminPassword | read-write | current | The administrative password to login to the router local device web UI. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.2 | ScalararrisRouterAdminTimeout | read-write | current | The administrative login timeout to the router local device web UI. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.3 | ScalararrisRouterTimeZoneUTCOffset | read-write | current | The timezone setting, in seconds offset from UTC. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.4 | ScalararrisRouterReboot | read-write | current | This will restart the eRouter |
| 1.3.6.1.4.1.4115.1.20.1.1.5.5 | ScalararrisRouterDefaults | read-write | current | This will reset router settings to their defaults. To restore all settings on the device, use restoreAll(3) |
| 1.3.6.1.4.1.4115.1.20.1.1.5.6 | ScalararrisRouterLanguage | read-write | current | Specify and retrieve the current language setting for the router. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.7 | ScalararrisRouterName | read-write | current | Optional name for the router/gateway |
| 1.3.6.1.4.1.4115.1.20.1.1.5.8 | ScalararrisRouterSerialNumber | read-only | current | Device serial number |
| 1.3.6.1.4.1.4115.1.20.1.1.5.9 | ScalararrisRouterBootCodeVersion | read-only | current | Device boot code version |
| 1.3.6.1.4.1.4115.1.20.1.1.5.10 | ScalararrisRouterHardwareVersion | read-only | current | Device hardware version |
| 1.3.6.1.4.1.4115.1.20.1.1.5.11 | ScalararrisRouterFirmwareVersion | read-only | current | Device firmware version |
| 1.3.6.1.4.1.4115.1.20.1.1.5.12 | ScalararrisRouterLogLevel | read-write | current | The logging level for the Arris SNMP daemon |
| 1.3.6.1.4.1.4115.1.20.1.1.5.13 | ScalararrisRouterCustomSettings | read-write | current | A generic string used for web UI settings. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.14 | ScalararrisRouterCustomID | read-write | current | An integer which represents a customer ID for customization. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.15 | ScalararrisRouterCurrentTime | read-write | current | The current time on the router. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16 | TablearrisRouterAuthTable | not-accessible | current | Table contains information about web UI users, roles, and passwords. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1 | RowarrisRouterAuthEntry | not-accessible | current | Table contains information about web UI users, roles, and passwords. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1.1 | ColumnarrisRouterAuthIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1.2 | ColumnarrisRouterAuthUserName | read-create | current | The user name. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1.3 | ColumnarrisRouterAuthPassword | read-create | current | The password for the user. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1.4 | ColumnarrisRouterAuthType | read-create | current | A string describing the type of user, i.e. technician, admin, standard, etc.. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.16.1.6 | ColumnarrisRouterAuthAccountEnabled | read-create | current | Get/set whether this account is disabled or enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17 | NodearrisRouterSNTPSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.1 | ScalararrisRouterEnableSNTP | read-write | current | Enable/disable the SNTP service |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4 | TablearrisRouterSNTPServerTable | not-accessible | current | A table of SNTP servers. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1 | RowarrisRouterSNTPServerEntry | not-accessible | current | A table of SNTP servers. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.1 | ColumnarrisRouterSNTPServerIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.2 | ColumnarrisRouterSNTPServerAddrType | read-create | current | IP address type of Network Time Server. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.3 | ColumnarrisRouterSNTPServerAddr | read-create | current | IP address of Network Time Server. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.4 | ColumnarrisRouterSNTPServerName | read-create | current | Host name of Network Time Server. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.5 | ColumnarrisRouterSNTPServerStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18 | NodearrisRouterEmailSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.1 | ScalararrisRouterEmailServerName | read-write | current | Name of email server to use. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.2 | ScalararrisRouterEmailServerUser | read-write | current | User name used to login to SMTP email server (optional). |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.3 | ScalararrisRouterEmailServerPW | read-write | current | Password used to login to SMTP email server (optional). |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.4 | ScalararrisRouterEmailAddress | read-write | current | Email address to send to |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.5 | ScalararrisRouterEnableLogEmail | read-write | current | Specify whether or not logs are sent via email |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.6 | ScalararrisRouterEmailApplySettings | read-write | current | Apply the email settings |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.8 | ScalararrisRouterEmailSenderAddress | read-write | current | Email address of sender |
| 1.3.6.1.4.1.4115.1.20.1.1.5.18.9 | ScalararrisRouterEmailSend | read-write | current | Sends email. Walk of this MIB always returns none(0). |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19 | NodearrisRouterLogSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1 | NodearrisRouterUserLogs | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1 | TablearrisRouterFirewallLogTable | not-accessible | current | A table of where each row represents an entry in the firewall log |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1 | RowarrisRouterFirewallLogEntry | not-accessible | current | A table of where each row represents an entry in the firewall log |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.1 | ColumnarrisRouterFWLogIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.2 | ColumnarrisRouterFWLogTime | read-only | current | Date and time when this event occurred. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.3 | ColumnarrisRouterFWLogInfo | read-only | current | Event/log entry |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2 | TablearrisRouterParentalContLogTable | not-accessible | current | A table of where each row represents an entry in the parental control log |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1 | RowarrisRouterParentalContLogEntry | not-accessible | current | A table of where each row represents an entry in the parental control log |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.1 | ColumnarrisRouterPCLogIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.2 | ColumnarrisRouterPCLogTime | read-only | current | Date and time when this event occurred. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.3 | ColumnarrisRouterPCLogInfo | read-only | current | Event/log entry |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.4 | ColumnarrisRouterPCLogType | read-create | current | Indicates the type of log. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3 | TablearrisRouterChangeLogTable | not-accessible | current | A table of where each row represents an entry in the user change log. This is a log of configuration changes by the user. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1 | RowarrisRouterChangeLogEntry | not-accessible | current | A table of where each row represents an entry in the user change log. This is a log of configuration changes by the user. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.1 | ColumnarrisRouterChangeLogIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.2 | ColumnarrisRouterChangeLogTime | read-only | current | Date and time when this event occurred. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.3 | ColumnarrisRouterChangeLogInfo | read-only | current | Event/log entry |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4 | TablearrisRouterDebugLogTable | not-accessible | current | A table of where each row represents a debug log item. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1 | RowarrisRouterDebugLogEntry | not-accessible | current | A table of where each row represents a debug log item. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.1 | ColumnarrisRouterDebugLogIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.2 | ColumnarrisRouterDebugLogTime | read-only | current | Date and time when this event occurred. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.3 | ColumnarrisRouterDebugLogInfo | read-only | current | Event/log entry |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7 | TablearrisRouterFirewallLogExtTable | not-accessible | current | An extended firewall log entry, it is only used for LGI at present. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1 | RowarrisRouterFirewallLogExtEntry | not-accessible | current | An extended firewall log entry, it is only used for LGI at present. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.1 | ColumnarrisRouterFWLogExtIndex | not-accessible | current | Indicates firewall log event type. It is only used for LGI at present. 1.TCP Port Scan 2.UDP Port Scan 3.SYN Flood 4.UDP Flood 5.ICMP Flood |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.2 | ColumnarrisRouterFWLogLatestEventTime | read-only | current | Date and time of the latest event for each event type. It is only used for LGI at present. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.3 | ColumnarrisRouterFWLogLatestEventInfo | read-only | current | Event log entry of the latest event for each event type. It is only used for LGI at present. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.4 | ColumnarrisRouterFWLogEventCount | read-only | current | Indicates counter of the latest event for each event type. It is only used for LGI at present. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2 | NodearrisRouterMSOLogs | |||
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1 | TablearrisRouterMSOChgLogTable | not-accessible | current | A table of where each row represents an entry in the MSO change log. This is a log of configuration changes that are not done by the user. Assumed to be the MS… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1 | RowarrisRouterMSOChgLogEntry | not-accessible | current | A table of where each row represents an entry in the MSO change log. This is a log of configuration changes that are not done by the user. Assumed to be the MS… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.1 | ColumnarrisRouterMSOChgLogIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.2 | ColumnarrisRouterMSOChgLogTime | read-only | current | Date and time when this event occurred. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.3 | ColumnarrisRouterMSOChgLogInfo | read-only | current | Event/log entry |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.2.2 | ScalararrisRouterClearMSOLogs | read-write | current | Clear user logs |
| 1.3.6.1.4.1.4115.1.20.1.1.5.19.3 | ScalararrisRouterClearLogs | read-write | current | Clear logs |
| 1.3.6.1.4.1.4115.1.20.1.1.5.20 | ScalararrisRouterTACACSAddr | read-write | current | The FQDN or IP Address of the Server |
| 1.3.6.1.4.1.4115.1.20.1.1.5.21 | ScalararrisRouterTACACSPort | read-write | current | The Server port |
| 1.3.6.1.4.1.4115.1.20.1.1.5.22 | ScalararrisRouterTACACSSecretKey | read-write | current | The secret key used to communicate with the Server |
| 1.3.6.1.4.1.4115.1.20.1.1.5.23 | ScalararrisRouterXmlProvisioningFile | read-write | current | The fully qualified path to a provisioning file to load. The file may be an URL using HTTP or TFTP. This value is not permanently stored in non-volatile memory… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.24 | ScalararrisRouterXmlProvisioningStatus | read-write | current | This object shows the download status of the Gateway XML configuration file. It can also be used to initiate an on demand download of the XML configuration fil… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.34 | ScalararrisRouterInboundTrafficLogEnable | read-write | current | If true log recent inbound packets |
| 1.3.6.1.4.1.4115.1.20.1.1.5.42 | TablearrisRouterInboundTrafficLogTable | not-accessible | current | Table contains recent inbound packet headers |
| 1.3.6.1.4.1.4115.1.20.1.1.5.42.1 | RowarrisRouterInboundTrafficLogEntry | not-accessible | current | Table contains recent inbound packet headers |
| 1.3.6.1.4.1.4115.1.20.1.1.5.42.1.1 | ColumnarrisRouterInboundTrafficLogIndex | not-accessible | current | Index currently limit to 50. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.42.1.2 | ColumnarrisRouterInboundTrafficLogData | read-only | current | Raw IP/UDP/TCP Headers for packet (may have extra bytes beyond headers) |
| 1.3.6.1.4.1.4115.1.20.1.1.5.55 | ScalararrisRouterWirelessBand | read-only | current | Get the operating band for Wireless Router. -1: unknown 0: 2.4 GHz 1: 5.0 GHz 2: 2.4 and 5.0 GHz |
| 1.3.6.1.4.1.4115.1.20.1.1.5.57 | ScalararrisRouterSaveCurrentConfigFile | read-write | current | Set save(1) to trigger device to save current configuration of Router to a specific file. This file will be a snapshot of the changes that have been made to th… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.58 | ScalararrisRouterRestoreCurrentConfigFile | read-write | current | Set restore(1) to trigger device to restore configuration of Router from a specific file. This backup file will be used by the Router to restore the user's set… |
| 1.3.6.1.4.1.4115.1.20.1.1.5.59 | ScalararrisRouterLocalPosixTimeZone | read-write | current | The local time zone definition, encoded according to IEEE 1003.1 (POSIX). The following is an example value: EST+5 EDT,M4.1.0/2,M10.5.0/2 |
| 1.3.6.1.4.1.4115.1.20.1.1.5.62 | ScalararrisRouterFirstInstallWizardCompletionStatus | read-write | current | If first install wizard is complete returns true otherwise false. GUI should set this MIB to true when first install wizard is complete. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.63 | ScalararrisRouterTroubleshooterEnable | read-write | current | Enable/Disable troubleshooting wizard. |
| 1.3.6.1.4.1.4115.1.20.1.1.5.65 | ScalararrisRouterCSRActiveTimeout | read-write | current | The duration for which CSR login is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.6 | NodearrisRouterHostAccess | |||
| 1.3.6.1.4.1.4115.1.20.1.1.6.7 | TablearrisRouterWebAccessTable | not-accessible | current | This table contains access levels for the web pages |
| 1.3.6.1.4.1.4115.1.20.1.1.6.7.1 | RowarrisRouterWebAccessEntry | not-accessible | current | This table contains access levels for the web pages |
| 1.3.6.1.4.1.4115.1.20.1.1.6.7.1.1 | ColumnarrisRouterWebAccessIndex | not-accessible | current | Index used to order the arrisRouterWebAccessTable entries. |
| 1.3.6.1.4.1.4115.1.20.1.1.6.7.1.2 | ColumnarrisRouterWebAccessPage | read-create | current | The web page to grant access to. i.e. router.html or any unique string that identifies a 'screen' or 'page on the web UI |
| 1.3.6.1.4.1.4115.1.20.1.1.6.7.1.3 | ColumnarrisRouterWebAccessLevel | read-create | current | Access level for the web page |
| 1.3.6.1.4.1.4115.1.20.1.1.6.7.1.4 | ColumnarrisRouterWebAccessRowStatus | read-create | current | For creating new rows |
| 1.3.6.1.4.1.4115.1.20.1.1.6.8 | ScalararrisRouterWebAccessWANACL | read-write | current | Access Control List of IPs that can access GUI and snmp via global WAN if empty no restrict to access GUI over global WAN format: ip[-ip](;ip[-ip])* example: 1… |
| 1.3.6.1.4.1.4115.1.20.1.1.7 | NodearrisRouterPingMgmt | |||
| 1.3.6.1.4.1.4115.1.20.1.1.7.1 | ScalararrisRouterPingTargetAddrType | read-write | current | The type of internet address used for arrisRouterPingTargetAddress. This object may be changed while a ping is in progress. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.2 | ScalararrisRouterPingTargetAddress | read-write | current | Sets the internet address of the entity to be pinged. Note that if an all-zeros value is specified for this object, then the ping will be sent to the default g… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.3 | ScalararrisRouterPingNumPkts | read-write | current | Allows the client to set the number of pings to be sent. This can be set to any number between 1 and (2^32 - 1), or can be set to 'infinite' by setting the val… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.4 | ScalararrisRouterPingPktSize | read-write | current | Allows the client to set the initial size of the ping packets that will be sent. This size includes the LLC header, IP header, ICMP header, and the CRC32 at th… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.5 | ScalararrisRouterPingInterval | read-write | current | Allows the client to set the amount of time (in milliseconds) that the device will sleep before sending a ping. Generally, this is the time between when a ping… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.6 | ScalararrisRouterPingTimeout | read-write | current | Allows the client to set the amount of time (in milliseconds) that the device should wait for a reply after sending a ping. If set to any non-negative value, t… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.7 | ScalararrisRouterPingVerifyReply | read-write | current | Enables/disables verification of ping replies. If enabled, and if waiting for replies is enabled, then if a reply is received, it will verify that it matches t… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.8 | ScalararrisRouterPingIpStackNumber | read-write | current | Allows the client to select the IP stack from which the pings will be sent. Specifying 0 means that the pings will be sent from the same IP stack on which this… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.9 | ScalararrisRouterPingStartStop | read-write | current | Starts or stops the pings, as well as indicating whether a ping is in progress when read. If a ping is already in progress and this object is set to true(1), t… |
| 1.3.6.1.4.1.4115.1.20.1.1.7.10 | ScalararrisRouterPingPktsSent | read-only | current | Indicates the number of packets sent since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.11 | ScalararrisRouterPingRepliesReceived | read-only | current | Indicates the number of replies received since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.12 | ScalararrisRouterPingRepliesVerified | read-only | current | Indicates the number of replies which were verified since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.13 | ScalararrisRouterPingOctetsSent | read-only | current | Indicates the total number of octets that have been sent in pings since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.14 | ScalararrisRouterPingOctetsReceived | read-only | current | Indicates the total number of octets that have been sent in pings since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.15 | ScalararrisRouterPingIcmpErrors | read-only | current | Indicates the total ICMP errors which have been received since the ping was started. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.16 | ScalararrisRouterPingLastIcmpError | read-only | current | Indicates value of the last ICMP error which was received, if any. If there have been no errors, this object will have a value of 0. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.17 | ScalararrisRouterPingAverageRtt | read-only | current | The current average ping round-trip-time (RTT). |
| 1.3.6.1.4.1.4115.1.20.1.1.7.18 | ScalararrisRouterPingMinRtt | read-only | current | The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.19 | ScalararrisRouterPingMaxRtt | read-only | current | The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.20 | ScalararrisRouterPingTargetDNSQueryIPAddrType | read-write | current | The protocol version (Ipv4/v6) used for sending DNS query if arrisRouterPingTargetAddressType is DNS. |
| 1.3.6.1.4.1.4115.1.20.1.1.7.21 | ScalararrisRouterPingLog | read-only | current | The ping result log. |
| 1.3.6.1.4.1.4115.1.20.1.1.8 | NodearrisRouterTraceRtMgmt | |||
| 1.3.6.1.4.1.4115.1.20.1.1.8.1 | ScalararrisRouterTraceRtTargAddrType | read-write | current | The type of internet address used for arrisRouterTraceRtTargetAddress. |
| 1.3.6.1.4.1.4115.1.20.1.1.8.2 | ScalararrisRouterTraceRtTargetAddr | read-write | current | Sets the internet address of the entity for the trace route. |
| 1.3.6.1.4.1.4115.1.20.1.1.8.3 | ScalararrisRouterTraceRtMaxHops | read-write | current | The maximum number of hops for the trace route |
| 1.3.6.1.4.1.4115.1.20.1.1.8.4 | ScalararrisRouterTraceRtDataSize | read-write | current | The data size of the trace route packet |
| 1.3.6.1.4.1.4115.1.20.1.1.8.5 | ScalararrisRouterTraceRtResolveHosts | read-write | current | Whether or not to resolve host names |
| 1.3.6.1.4.1.4115.1.20.1.1.8.6 | ScalararrisRouterTraceRtBasePort | read-write | current | Base port to use for trace route |
| 1.3.6.1.4.1.4115.1.20.1.1.8.7 | ScalararrisRouterTraceRtStart | read-write | current | Start a running trace route. Will return traceRouteRunning(0) if a trace route is currently running. |
| 1.3.6.1.4.1.4115.1.20.1.1.8.8 | ScalararrisRouterTraceRtLog | read-only | current | The most recent output log for trace route. Up to 255 bytes. Individual lines are separated by a newline \n |
| 1.3.6.1.4.1.4115.1.20.1.1.8.9 | ScalararrisRouterTraceRtTimeout | read-write | current | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.4.1.4115.1.20.1.1.8.10 | ScalararrisRouterTraceRtDiffServ | read-write | current | Specifies the value to store in the Type of Service (TOS) octet in the IPv4 header or in the Traffic Class octet in the IPv6 header, respectively, of the IP pa… |
| 1.3.6.1.4.1.4115.1.20.1.1.9 | ScalararrisRouterApplyAllSettings | read-write | current | This applies settings for the entire MIB. All services and components in the router will be restarted |
| 1.3.6.1.4.1.4115.1.20.1.1.10 | NodearrisRouterICtrl | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.1 | ScalararrisRouterICtrlPortMapCount | read-only | current | Count of the rows in the table: arrisRouterICtrlPortMapTable |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2 | TablearrisRouterICtrlPortMapTable | not-accessible | current | This table contains IP port mappings. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1 | RowarrisRouterICtrlPortMapEntry | not-accessible | current | This table contains IP port mappings |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.1 | ColumnarrisRouterICtrlPortMapIndex | not-accessible | current | Table index |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.2 | ColumnarrisRouterPortMapDescription | read-create | current | Provides a descriptive human-readable string explaining the usage of the port mapping. For example, Port 80 might be represented as Web Server. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.3 | ColumnarrisRouterPortMapInternalClientAddrType | read-create | current | This is the IP address type of the destination host that traffic assigned to this port from the WAN will be mapped to on the LAN. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.4 | ColumnarrisRouterPortMapInternalClientAddr | read-create | current | This is the IP address of the destination host that traffic assigned to this port from the WAN will be mapped to on the LAN. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.5 | ColumnarrisRouterPortMapProtocol | read-create | current | Can be 'UDP' or 'TCP'. Used to set the specific IP protocol type that this port is mapped for. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.6 | ColumnarrisRouterPortMapExternalPort | read-create | current | The port number that an external host will connect to on the WAN side of the router that will be mapped |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.7 | ColumnarrisRouterPortMapInternalPort | read-create | current | port number that will be used on the destination host |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.8 | ColumnarrisRouterPortMapRowStatus | read-create | current | For creating new rows |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.9 | ColumnarrisRouterPortMapInternalStartPort | read-create | current | start port number that will be used on the destination host |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.10 | ColumnarrisRouterPortMapInternalEndPort | read-create | current | end port number that will be used on the destination host |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.11 | ColumnarrisRouterPortMapExternalStartPort | read-create | current | The start port number that an external host will connect to on the WAN side of the router that will be mapped |
| 1.3.6.1.4.1.4115.1.20.1.1.10.2.1.12 | ColumnarrisRouterPortMapExternalEndPort | read-create | current | The end port number that an external host will connect to on the WAN side of the router that will be mapped |
| 1.3.6.1.4.1.4115.1.20.1.1.10.3 | NodearrisRouterICtrlGetDeviceSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.3.1 | ScalararrisRouterICtrlDeviceSettingsFWversion | read-only | current | The Firmware Version. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.4 | NodearrisRouterICtrlIsDeviceReady | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.4.1 | ScalararrisRouterICtrlDeviceStatus | read-only | current | This method is used to determine if a given device is ready to process HNAP calls. It can be used in a reboot sequence, so that an HNAP client knows when an HN… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.5 | NodearrisRouterICtrlReboot | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.5.1 | ScalararrisRouterICtrlInitiateReboot | read-write | current | Initiate a reboot. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.6 | NodearrisRouterICtrlSetDeviceSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.6.1 | ScalararrisRouterICtrlSetDeviceName | read-write | current | A user-readable friendly name to use for this device. This name is used for the following: End users associate this name with devices when displayed by device … |
| 1.3.6.1.4.1.4115.1.20.1.1.10.6.2 | ScalararrisRouterICtrlSetAdminPassword | read-write | current | The administrator password for this device |
| 1.3.6.1.4.1.4115.1.20.1.1.10.7 | NodearrisRouterICtrlRouterSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.7.1 | ScalararrisRouterICtrlRouterManageRemote | read-write | current | Indicates if remote management is enabled for this device. true: the administrative interface and HNAP interfaces are accessible from the WAN side of the route… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.7.2 | ScalararrisRouterICtrlRouterRemotePort | read-write | current | Returns the port number that can be used to access the router management interface from the WAN side |
| 1.3.6.1.4.1.4115.1.20.1.1.10.7.3 | ScalararrisRouterICtrlRouterRemoteSSL | read-write | current | Indicates if the secure SSL port is available for this device. true: the remote port specified by RemotePort will ONLY accept SSL connections. false: the remot… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.8 | NodearrisRouterICtrlWLanRadioSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.8.1 | ScalararrisRouterICtrlWLanRadioMacAddress | read-write | current | The MAC address for this interface. The device will still return this, even if the WLAN interface is currently disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.8.2 | ScalararrisRouterICtrlWLanRadioChannelWidth | read-write | current | Width of each channel. This corresponds to the 802.11n channel width standard. Valid values are: 0: Automatic 20: 20 MHz channel width 40: 40 MHz channel width… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.9 | NodearrisRouterICtrlSetBridgeConnect | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.9.1 | ScalararrisRouterICtrlSetBridgeEthernetPort | read-write | current | The parameter 'EthernetPort' determines which physical Ethernet LAN port is able to accept bridged traffic. This port must correspond to the physically numbere… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.9.2 | ScalararrisRouterICtrlSetBridgeMinutes | read-write | current | The parameter 'Minutes' specifies the maximum amount of time the bridge is to remain active after which the bridge is immediately closed without warning, secon… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.9.3 | ScalararrisRouterICtrlSetBridgePermanentPort4Enable | read-write | current | Set the port 4 to permanent bridge mode. Default value is false. If this MIB is enabled, it overrides the other two ICtrlSetBridge mibs(arrisRouterICtrlSetBrid… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10 | NodearrisRouterICtrlGetWanSettings | |||
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.2 | ScalararrisRouterICtrlGetWanType | read-write | current | The type of configuration. Can be one of the following values, depending on the WAN configurations supported by the device. BigPond DHCP DHCPPPPoE DynamicL2TP … |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.3 | ScalararrisRouterICtrlGetWanMTU | read-write | current | The maximum packet size (maximum transmission unit (MTU)) in octets. This cannot exceed what the router supports (that is, the MTU value that the router provid… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.4 | ScalararrisRouterICtrlGetWanPrefixLen | read-write | current | The prefix (netmask) for the Wan connection. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.5 | ScalararrisRouterICtrlGetWanGatewayAddrType | read-write | current | The type for the gateway IP address for this router. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.6 | ScalararrisRouterICtrlGetWanGatewayAddr | read-write | current | The the gateway IP address for this router. If Type is set to DHCP, DHCPPPPoE, DynamicPPPOA or Dynamic1483Bridged this returns the DHCPconfigured values. If DH… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.7 | ScalararrisRouterICtrlGetWanDNSPrimaryAddrType | read-write | current | The type for the DNS address. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.8 | ScalararrisRouterICtrlGetWanDNSPrimaryAddr | read-write | current | The DNS primary setting for this router. If DHCP is being used as the WAN Type, a device should return DNS settings it may have obtained from the DHCP lease. B… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.9 | ScalararrisRouterICtrlGetWanDNSSecondaryAddrType | read-write | current | The type for the DNS address. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.10 | ScalararrisRouterICtrlGetWanDNSSecondaryAddr | read-write | current | The DNS secondary setting for this router. If DHCP is being used as the WAN Type, a device should return DNS settings it may have obtained from the DHCP lease.… |
| 1.3.6.1.4.1.4115.1.20.1.1.10.10.11 | ScalararrisRouterICtrlGetWanMacAddress | read-write | current | The MAC address for the WAN interface. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.11 | ScalararrisRouterICtrlHNAPServerPort | read-write | current | The port used by the internal HNAP server to receive messages from the HNAP client. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.12 | ScalararrisRouterICtrlEnable | read-write | current | Enable or disable the IControl Module, default is disabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.13 | ScalararrisRouterICtrlHashingKey | read-write | current | Set hashing key for IControl feature to calculate the wpa psk. |
| 1.3.6.1.4.1.4115.1.20.1.1.10.14 | ScalararrisRouterICtrlPortMapTableEnabled | read-write | current | Indicates whether iCtrl Port Mapping is enabled. |
| 1.3.6.1.4.1.4115.1.20.1.1.11 | NodearrisRouterFlapListCfg | |||
| 1.3.6.1.4.1.4115.1.20.1.1.11.1 | ScalararrisRouterFlapListEnable | read-write | current | Is the Flap List enabled or not |
| 1.3.6.1.4.1.4115.1.20.1.1.11.2 | ScalararrisRouterFlapListWLANInterval | read-write | current | Minimum number of Seconds between subsequent WLAN Associations from the same client in order to mark it as flapping |
| 1.3.6.1.4.1.4115.1.20.1.1.11.3 | ScalararrisRouterFlapListDHCPInterval | read-write | current | Minimum number of Seconds between subsequent DHCP Requests from the same client in order to mark it as flapping |
| 1.3.6.1.4.1.4115.1.20.1.1.11.4 | ScalararrisRouterFlapListReportPeroid | read-write | current | Maximum Number of Seconds to maintian a client in the Flap List. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.5 | ScalararrisRouterFlapListWLANCount | read-only | current | Total Number of WLAN Clients in the WLAN Flap List. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.6 | ScalararrisRouterFlapListLANCount | read-only | current | Total Number of LAN Clients in the LAN Flap List |
| 1.3.6.1.4.1.4115.1.20.1.1.11.7 | ScalararrisRouterFlapListReqFreqThreshold | read-write | current | Minimum number of flap count that determines the client is flapping |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10 | TablearrisRouterFlapListWLANTable | not-accessible | current | A table of WLAN Flapping Clients |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10.1 | RowarrisRouterFlapListWLANEntry | not-accessible | current | A table of WLAN Flap List Clients |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10.1.1 | ColumnarrisRouterFlapListWLANIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10.1.2 | ColumnarrisRouterFlapListWLANMacAddress | read-only | current | A MAC address of a WLAN station which has flapped. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10.1.3 | ColumnarrisRouterFlapListWLANRemoveTime | read-only | current | The date and time when this Client Last Flapped. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.10.1.4 | ColumnarrisRouterFlapListWLANFlapTime | read-only | current | The date and time when this Client can be removed from the List. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11 | TablearrisRouterFlapListLANTable | not-accessible | current | A table of LAN Flapping Clients |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11.1 | RowarrisRouterFlapListLANEntry | not-accessible | current | A table of LAN Flap List Clients |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11.1.1 | ColumnarrisRouterFlapListLANIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11.1.2 | ColumnarrisRouterFlapListLANMacAddress | read-only | current | The MAC address of a LAN Client which has flapped. |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11.1.3 | ColumnarrisRouterFlapListLANRemoveTime | read-only | current | The date and time when this Client Entry can be removed |
| 1.3.6.1.4.1.4115.1.20.1.1.11.11.1.4 | ColumnarrisRouterFlapListLANFlapTime | read-only | current | The date and time when this Client Last Flapped. |