ARRIS-TR143-SPEED-TEST-MIB
45 objects
This MIB module supplies the basic proprietary management objects for ARRIS modems.
Imported Objects
| ARRIS-MIB | arrisProdIdCM |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.3.6 | IdentityarrisSpeedTestMib | This MIB module supplies the basic proprietary management objects for ARRIS modems. | ||
| 1.3.6.1.4.1.4115.1.3.6.2 | NodearrisTR143MibObjects | |||
| 1.3.6.1.4.1.4115.1.3.6.2.1 | NodearrisTR143DownloadDiagnostics | |||
| 1.3.6.1.4.1.4115.1.3.6.2.1.1 | ScalararrisTR143DownloadDiagnosticsState | read-write | current | Indicate the availability of diagnostic data. One of: None Requested Completed Error_InitConnectionFailed Error_NoResponse Error_TransferFailed Error_PasswordR… |
| 1.3.6.1.4.1.4115.1.3.6.2.1.2 | ScalararrisTR143DownloadInterface | read-write | current | Specifies the IP-layer interface over which the test is to be performed.The value of this parameter MUST be either a valid interface or an empty string. If an … |
| 1.3.6.1.4.1.4115.1.3.6.2.1.3 | ScalararrisTR143DownloadURL | read-write | current | The URL for the CPE to perform the download on. This parameter MUST be in the form of a valid HTTP or FTP URL. |
| 1.3.6.1.4.1.4115.1.3.6.2.1.4 | ScalararrisTR143DownloadTransports | read-only | current | Comma-separated list of supported DownloadDiagnostics transport protocols for a CPE device. Each item in the lis is an enumeration of: HTTP FTP(OPTIONAL) |
| 1.3.6.1.4.1.4115.1.3.6.2.1.5 | ScalararrisTR143DownloadDSCP | read-write | current | The DiffServ code point for marking packets transmitted in the test. The default value SHOULD be zero. |
| 1.3.6.1.4.1.4115.1.3.6.2.1.6 | ScalararrisTR143DownloadEthernetPriority | read-write | current | Ethernet priority code for marking packets transmitted in the test (if applicable). The default value SHOULD be zero. |
| 1.3.6.1.4.1.4115.1.3.6.2.1.7 | ScalararrisTR143DownloadROMTime | read-only | current | For HTTP this is the time at which the client sends the GET command. For FTP this is the time at which the client sends the RTRV command. |
| 1.3.6.1.4.1.4115.1.3.6.2.1.8 | ScalararrisTR143DownloadBOMTime | read-only | current | For HTTP this is the time at which the first data packet is received. For FTP this is the time at which the client receives the first data packet on the data c… |
| 1.3.6.1.4.1.4115.1.3.6.2.1.9 | ScalararrisTR143DownloadEOMTime | read-only | current | For HTTP this is the time at which the last data packet is received. For FTP this is the time at which the client receives the last packet on the data connecti… |
| 1.3.6.1.4.1.4115.1.3.6.2.1.10 | ScalararrisTR143DownloadTestBytesReceived | read-only | current | The test traffic received in bytes during the FTP/HTTP transaction including FTP/HTTP headers, between BOMTime and EOMTime |
| 1.3.6.1.4.1.4115.1.3.6.2.1.11 | ScalararrisTR143DownloadTotalBytesReceived | read-only | current | The total number of bytes received on the Interface between BOMTime and EOMTime. |
| 1.3.6.1.4.1.4115.1.3.6.2.1.12 | ScalararrisTR143DownloadTCPOpenRequestTime | read-only | current | For HTTP this is the time at which the TCP socket open (SYN) was sent for the HTTP connection. For FTP this is the time at which the TCP socket open (SYN) was … |
| 1.3.6.1.4.1.4115.1.3.6.2.1.13 | ScalararrisTR143DownloadTCPOpenResponseTime | read-only | current | For HTTP this is the time at which the TCP ACK to the socket opening the HTTP connection was received. For FTP this is the time at which the TCP ACK to the soc… |
| 1.3.6.1.4.1.4115.1.3.6.2.1.14 | ScalararrisTR143DownloadThroughput | read-only | current | Indicates the calculated throughput of the most recently completed file transfer.This value is calculated by dividing arrisTR143DownloadTotalBytesReceived by (… |
| 1.3.6.1.4.1.4115.1.3.6.2.2 | NodearrisTR143UploadDiagnostics | |||
| 1.3.6.1.4.1.4115.1.3.6.2.2.1 | ScalararrisTR143UploadDiagnosticsState | read-write | current | Indicate the availability of diagnostic data. One of: None Requested Completed Error_InitConnectionFailed Error_NoResponse Error_TransferFailed Error_PasswordR… |
| 1.3.6.1.4.1.4115.1.3.6.2.2.2 | ScalararrisTR143UploadInterface | read-write | current | Specifies the IP-layer interface over which the test is to be performed.The value of this parameter MUST be either a valid interface or an empty string. If an … |
| 1.3.6.1.4.1.4115.1.3.6.2.2.3 | ScalararrisTR143UploadURL | read-write | current | The URL for the CPE to perform the download on. This parameter MUST be in the form of a valid HTTP or FTP URL. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.4 | ScalararrisTR143UploadTransports | read-only | current | Comma-separated list of supported UploadDiagnostics transport protocols for a CPE device. Each item in the lis is an enumeration of: HTTP FTP(OPTIONAL) |
| 1.3.6.1.4.1.4115.1.3.6.2.2.5 | ScalararrisTR143UploadDSCP | read-write | current | The DiffServ code point for marking packets transmitted in the test. The default value SHOULD be zero. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.6 | ScalararrisTR143UploadEthernetPriority | read-write | current | Ethernet priority code for marking packets transmitted in the test (if applicable). The default value SHOULD be zero. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.7 | ScalararrisTR143UploadROMTime | read-only | current | For HTTP this is the time at which the client sends the PUT command. For FTP this is the time at which the STOR command is sent. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.8 | ScalararrisTR143UploadBOMTime | read-only | current | For HTTP this is the time at which the first data packet is sent. For FTP this is the time at which the client receives the ready for transfer notification. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.9 | ScalararrisTR143UploadEOMTime | read-only | current | For HTTP this is the time when the HTTP successful response code is received. For FTP this is the time when the client receives a transfer complete. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.10 | ScalararrisTR143UploadTestFileLength | read-write | current | The size of the file (in bytes) to be uploaded to the server. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.11 | ScalararrisTR143UploadTotalBytesSent | read-only | current | The total number of bytes sent on the Interface between BOMTime and EOMTime. |
| 1.3.6.1.4.1.4115.1.3.6.2.2.12 | ScalararrisTR143UploadTCPOpenRequestTime | read-only | current | For HTTP this is the time at which the TCP socket open (SYN) was sent for the HTTP connection. For FTP this is the time at which the TCP socket open (SYN) was … |
| 1.3.6.1.4.1.4115.1.3.6.2.2.13 | ScalararrisTR143UploadTCPOpenResponseTime | read-only | current | For HTTP this is the Time at which the TCP ACK to the socket opening the HTTP connection was received. For FTP this is the Time at which the TCP ACK to the soc… |
| 1.3.6.1.4.1.4115.1.3.6.2.2.14 | ScalararrisTR143UploadThroughput | read-only | current | Indicates the calculated throughput of the most recently completed file transfer.This value is calculated by dividing arrisTR143UploadTotalBytesSent by (arrisT… |
| 1.3.6.1.4.1.4115.1.3.6.2.3 | NodearrisTR143UDPEchoConfig | |||
| 1.3.6.1.4.1.4115.1.3.6.2.3.1 | ScalararrisTR143UDPEchoEnable | read-write | current | Enable to receive UDP echo. When enabled from a disabled state all related timestamps, statistics and UDP Echo Plus counters are cleared. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.2 | ScalararrisTR143UDPEchoInterface | read-write | current | IP-layer interface over which the CPE MUST listen and receive UDP echo requests on. The value of this parameter MUST be either a valid interface or an empty st… |
| 1.3.6.1.4.1.4115.1.3.6.2.3.3 | ScalararrisTR143UDPEchoSourceIPAddress | read-write | current | The Source IP address of the UDP echo packet. The CPE MUST only respond to a UDP echo from this source IP address. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.4 | ScalararrisTR143UDPEchoUDPPort | read-write | current | The UDP port on which the UDP server MUST listen and respond to UDP echo requests. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.5 | ScalararrisTR143UDPEchoPlusEnabled | read-write | current | If True the CPE will perform necessary packet processing for UDP Echo Plus packets. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.6 | ScalararrisTR143UDPEchoPlusSupported | read-only | current | True if UDP Echo Plus is supported. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.7 | ScalararrisTR143UDPEchoPacketsReceived | read-only | current | Incremented upon each valid UDP echo packet received. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.8 | ScalararrisTR143UDPEchoPacketsResponded | read-only | current | Incremented for each UDP echo response sent. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.9 | ScalararrisTR143UDPEchoBytesReceived | read-only | current | The number of UDP received bytes including payload and UDP header after the UDPEchoConfig is enabled. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.10 | ScalararrisTR143UDPEchoBytesResponded | read-only | current | The number of UDP responded bytes, including payload and UDP header sent after the UDPEchoConfig is enabled. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.11 | ScalararrisTR143UDPEchoTimeFirstPacketReceived | read-only | current | The time that the server receives the first UDP echo packet after the UDPEchoConfig is enabled. |
| 1.3.6.1.4.1.4115.1.3.6.2.3.12 | ScalararrisTR143UDPEchoTimeLastPacketReceived | read-only | current | The time that the server receives the most recent UDP echo packet. |