ARUBA-TC
50 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | ObjectSyntax TimeTicks |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ArubaAccessPointMode | INTEGER{ airMonitor(1), accessPoint(2), accessPointAndMonitor(3), meshPortal(4), meshPoint(5) } | current | The mode of the access point. |
| ArubaACLAction | INTEGER { deny(1), permit(2), srcNAT(3), dstNAT(4), redirect(5) } | current | Represents the Actions in an ACL rule. |
| ArubaACLDomain | INTEGER { alias(1), any(2), user(3), host(4), network(5) } | current | Represents both the source and destination to which an ACL rule will be applied. |
| ArubaACLNetworkServiceType | INTEGER { alias(1), any(2), tcp(3), udp(4), protocol(5) } | current | Represents the network service in an ACL Rule. |
| ArubaActiveState | INTEGER { active(1), inactive(2) } | current | Represents if a feature is active or inactive. |
| ArubaAddressType | INTEGER{ srcAddress(1), dstAddress(2), bssid(3) } | current | Address Type. |
| ArubaAntennaSetting | INTEGER { notPresent(1), enabled(2), disabled(3) } | current | Represents the status of the external antenna. |
| ArubaAPMatchMethod | INTEGER { notApplicable(0), exactMatch(1), plusOneMatch(2), minusOneMatch(3) } | current | Represents the match method of a suspected rogue AP. |
| ArubaAPMatchType | INTEGER { unknown(0), configuredWiredMac(1), ethernetWiredMac(2), apWiredMac(3), externalWiredMac(4), manual(5), baseBSSIDOverride(6), mms(7), ethernetGatewayWiredMac(8) } | current | Represents the match type of a suspected rogue AP. |
| ArubaAPStatus | INTEGER { up(1), down(2) } | current | The status of the access point. |
| ArubaAuthenticationMethods | INTEGER { none(0), web(1), mac(2), vpn(3), dot1x(4), kerberos(5), secureId(7), pubcookie(15), xSec(16), xSecMachine(17), other(255) } | current | Authentication Method. |
| ArubaAuthServerType | INTEGER{ internaldb(1), radius(2), ldap(3), kerberos(4), tacacs(5) } | current | The type of the auth server. |
| ArubaBlackListReason | INTEGER { userDefined(1), mitmAttack(2), authFailure(3), pingFlood(4), sessionFlood(5), synFlood(6), sessionBlacklist(7), ipSpoofing(8), esiBlacklist(9), other(100) } | current | Black List Reason. |
| ArubaCallStates | INTEGER { idle(0), initiated(1), connecting(2), delivered(3), connected(4), offered(5), alerting(6), releasing(7), cancelling(8), transient(9), dummy503(10), succ(11), fail(12), aborted(13), blocked(14) } | current | The Call state. |
| ArubaCardType | INTEGER { lc1(1), lc2(2), sc1(3), sc2(4), sw2400(5), sw800(6), sw200(7), m3mk1(8), sw3200(9), sw3400(10), sw3600(11) } | current | Type of the hardware module. |
| ArubaConfigurationChangeType | INTEGER { create(1), delete(2), modify(3) } | current | Configuration Change Types. |
| ArubaConfigurationState | INTEGER { success(1), error(2) } | current | Configuration Transfer Types. |
| ArubaDaysOfWeek | INTEGER { sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7) } | current | Represents the Actions in an ACL rule. |
| ArubaDBType | INTEGER { mssql(1), mysql(2) } | current | DataBase Type. |
| ArubaDot1dState | INTEGER { disabled(1), blocked(2), listening(3), learning(4), forwarding(5) } | current | Represents the controller port spanning tree state. |
| ArubaEnableValue | INTEGER { enabled(1), disabled(2) } | current | Represents a Flag which is either Enabled or Disabled. |
| ArubaEncryptionMethods | BITS{ disabled(0), static-wep(1), dynamic-wep(2), static-wpa(3), dynamic-wpa(4), wpa2-psk-aes(5), wpa2-8021x-aes(6), wpa2PreAuth(7), xsec(8), wpa-psk-aes(9), wpa-aes(10), wpa2-psk-tkip(11), wpa2-8021x-tkip(12) } | current | Represents the Actions in an ACL rule. |
| ArubaEnet1Mode | INTEGER { activeStandby(1), tunnel(2), bridge(3), notApplicable(4) } | current | Represents the Mode of the Ethernet port on the Access Point |
| ArubaESIServerMode | INTEGER { bridged(1), routed(2), nat(3) } | current | The mode of the ESI server. |
| ArubaESIServerStatus | INTEGER { up(1), down(2) } | current | The status of the ESI server. |
| ArubaFrameType | INTEGER { associateRequest(0), associateResponse(1), reassociateRequest(2), reassociateResponse(3), probeRequest(4), probeResponse(5), beacon(8), atim(9), disassociate(10), auth(11), deauth(12) } | current | Represents the Frame type. |
| ArubaHashAlgorithms | INTEGER { md5(1), sha(2) } | current | Represents the Actions in an ACL rule. |
| ArubaIfType | INTEGER { port(1), vlan(2), tunnel(3), loopback(4) } | current | The type of interface referred to by the value of ifIndex. |
| ArubaMeshRole | INTEGER { nonmesh(0), point(1), portal(2) } | current | Mesh role |
| ArubaMonitorMode | INTEGER { unknown(0), all(1), none(2), mixed(3) } | current | Represents whether the AP has any radios dedicated to monitoring. |
| ArubaOperStateValue | INTEGER { up(1), down(2), testing(3) } | current | Represents Operational state of an interface. |
| ArubaPhyType | INTEGER { dot11a(1), dot11b(2), dot11g(3), dot11ag(4), wired(5) } | current | Represents the PHY-type of the access point. Wired clients will show 'wired' in user MIB entries. |
| ArubaPoeState | INTEGER { disabled(1), enabled(2), enabledCisco(3) } | current | Represents the POE mode. |
| ArubaPortDuplex | INTEGER { half(1), full(2), auto(3) } | current | Port Duplexity. |
| ArubaPortMode | INTEGER { access(1), dot1q(2) } | current | Represents the controller port mode. |
| ArubaPortSpeed | INTEGER { speed10Mbps(1), speed100Mbps(2), speed1000Mbps(3), speedAuto(4), speed10Gbps(5) } | current | Port Speed. |
| ArubaPortType | INTEGER { fastethernet(1), gigabitethernet(2), xgigabitethernet(3) } | current | Port Type. |
| ArubaRogueApType | INTEGER { valid(1), interfering(2), unsecure(3), dos(4), unknown(5), knownInterfering(6), suspectedUnsecure(7) } | current | Represents the Rogue AP Type. |
| ArubaStationType | INTEGER { valid(1), interfering(2), dos(3) } | current | Represents the station type. |
| ArubaSubAuthenticationMethods | INTEGER { authPAP(1), authCHAP(2), authMSCHAP(3), authMSCHAPv2(4), eapTLS(5), eapTTLS(6), eapLEAP(7), eapMD5(8) } | current | Sub Authentication Method (e.g. EAP type). |
| ArubaSupportStatus | INTEGER { unsupported(1), supported(2) } | current | Represents if a feature is supported or unsupported. |
| ArubaSwitchRole | INTEGER { master(1), local(2), backupmaster(3) } | current | Represents the role of the controller |
| ArubaUnprovisionedStatus | INTEGER { yes(1), no(2) } | current | Represents whether the AP is provisioned or not. |
| ArubaVlanValidRange | INTEGER(1..4095) | current | Represents the Valid Vlan Id Range. |
| ArubaVoiceCacBit | BITS { cacActiveLoadBalancing(0), cacHighCapThresholdReached(1), cacHandRsrvThresholdReached(2), cacPeakCapacityReached(3) } | current | Voice CAC bit flags |
| ArubaVoiceCdrDirection | INTEGER { og(0), ic(1) } | current | VoIP CDR direction |
| ArubaVoipProtocol | INTEGER { sccp(1), svp(2), vocera(3), sip(9), ua(11) } | current | VoIP protocol used |
| ArubaVoipProtocolType | INTEGER{ sccp(1), svp(2), vocera(3), sip(4), unknown(10) } | current | The type of VoIP protocols supported. |
| ArubaVoipRegState | INTEGER { unkown(0), registering(1), unregistering(2), challenge(3), registered(4), unregistered(5) } | current | VoIP registered state |
| ArubaVrrpState | INTEGER { initialize(1), backup(2), master(3) } | current | DataBase Type. |