ARUBAWIRED-LOOPPROTECT-MIB
33 objects
This MIB module contains HP proprietary extensions to the standard Loop Protect MIBs.
Imported Objects
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.1 | IdentityarubaWiredLoopProtectMIB | This MIB module contains HP proprietary extensions to the standard Loop Protect MIBs. | ||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1 | NodearubaWiredLoopProtectObjects | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5 | NodearubaWiredLoopProtect | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0 | NodearubaWiredLoopProtectNotifications | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.1 | NotificationarubaWiredLoopProtectLoopDetectedNotification | current | A arubaWiredLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection Protocol. Generation of this notification is controlle… | |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.0.2 | NotificationarubaWiredLoopProtectVlanLoopDetectedNotification | current | A arubaWiredLoopProtectVlanLoopDetectedNotification signifies that a loop is detected by the Loop Protection feature while operating in VLAN mode. Generation o… | |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1 | NodearubaWiredLoopProtectBase | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.1 | ScalararubaWiredLoopProtectInterval | read-write | current | The interval in seconds at which Loop Protection packets are transmitted. The default value is 5 seconds. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.2 | ScalararubaWiredLoopProtectTrapLoopDetectEnable | read-write | current | Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2). |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.3 | ScalararubaWiredLoopProtectEnableTimer | read-write | current | The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port i… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.4 | ScalararubaWiredLoopProtectMode | read-write | current | This object is used to configure the operational mode of Loop Protection feature. The Loop Protection feature can be configured to operate in port mode or VLAN… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.1.5 | ScalararubaWiredLoopProtectVIDList | read-write | current | A list of VLANs on which Loop Protection is enabled. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2 | NodearubaWiredLoopProtectPort | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1 | TablearubaWiredLoopProtectPortTable | not-accessible | current | Per-interface configuration for Loop Protection. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1 | RowarubaWiredLoopProtectPortEntry | not-accessible | current | Loop Protection configuration information for a single port. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.1 | ColumnarubaWiredLoopProtectPortInterfaceIndex | not-accessible | current | The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the s… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.2 | ColumnarubaWiredLoopProtectPortEnable | read-write | current | This object indicates whether the Loop Protection is enabled on a port. The default value is FALSE |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.3 | ColumnarubaWiredLoopProtectPortLoopDetected | read-only | current | This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's arubaWiredLoopProtectPortE… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.4 | ColumnarubaWiredLoopProtectPortLastLoopTime | read-only | current | The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.5 | ColumnarubaWiredLoopProtectPortLoopCount | read-only | current | This object provides the number of loops detected on a Loop Protection enabled port. The value of this object is set to zero when Loop Protection is disabled o… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.6 | ColumnarubaWiredLoopProtectPortReceiverAction | read-write | current | Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. Whe… |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.7 | ColumnarubaWiredLoopProtectLoopDetectedVlan | read-only | current | The loop-detected VLAN ID. A value of 0 indicates no loop. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.2.1.1.8 | ColumnarubaWiredLoopProtectPortVlanList | read-write | current | A list of VLANs for this interface in which Loop Protection is enabled. |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3 | NodearubaWiredLoopProtectConformance | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1 | NodearubaWiredLoopProtectGroups | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1.4 | GrouparubaWiredLoopProtectBaseGroup | current | A collection of objects providing basic instrumentation and control of the HP Loop protection entity. | |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1.10 | GrouparubaWiredLoopProtectVLANGroup | current | A collection of objects providing support for Loop Protect per VLAN feature. | |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.1.11 | GrouparubaWiredLoopProtectNotificationsGroup | current | Aruba Wired Loop Protect notification group. | |
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2 | NodearubaWiredLoopProtectCompliances | |||
| 1.3.6.1.4.1.47196.4.1.1.3.1.1.5.3.2.5 | CompliancearubaWiredLoopProtectCompliance | current | The compliance statement for HP Switches with support for arubaWired loop protection objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ConfigStatus | INTEGER { active(1), notInService(2), notReady(3) } | current | Used to indicate the configuration status for a group of objects. 'active' means that the values of the related objects are currently in use by the device. 'notInService' indicates that the objects have been reconfigure… |
| LoopProtectReceiverAction | INTEGER { disableTx(1), noDisable(2), disableTxRx(3) } | current | This TC describes the actions a port that receives a Loop Protection Protocol packet can take. The disableTx(1) enumeration indicates that the sender of the Loop Protect packet will be disabled. The noDisable(2) enumera… |
| VidList | OCTET STRING (SIZE (0..512)) | current | Each octet within this value specifies a set of eight VlanIIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit r… |