ARUBAWIRED-MCLAG-MIB
54 objects
This is the MIB module related to HPE Aruba MCLAG feature
Imported Objects
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.2 | IdentityarubaWiredMclagMIB | This is the MIB module related to HPE Aruba MCLAG feature | ||
| 1.3.6.1.4.1.47196.4.1.1.3.2.1 | NodearubaWiredMclagConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1 | NodearubaWiredMclagIslConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.1 | ScalararubaWiredMclagIslPort | read-write | obsolete | IfIndex corresponding to the Mclag InterSwitchLink port. A value of 0 means there is no ISL port configuration. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.2 | ScalararubaWiredMclagIslHelloInterval | read-write | obsolete | ISLP hello interval in seconds. The default value is 1. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.3 | ScalararubaWiredMclagIslHoldTime | read-write | obsolete | ISL port-flap hold time in seconds. The default value is 0. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.4 | ScalararubaWiredMclagIslHelloTimeout | read-write | obsolete | ISL hello timeout in seconds. The default value is 3. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.5 | ScalararubaWiredMclagIslDevicePriority | read-write | obsolete | Mclags on device with lower value of priority will stay UP in the case of split. The default value is 8. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.6 | ScalararubaWiredMclagIslSystemID | read-only | obsolete | Device identifier. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.7 | ScalararubaWiredMclagIslPlatformName | read-only | obsolete | Device type. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.8 | ScalararubaWiredMclagIslSwVersion | read-only | obsolete | S/W version running on the device type. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.9 | ScalararubaWiredMclagIslVIDList | read-only | obsolete | VLAN IDs that the ISL port is a member of. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2 | NodearubaWiredMclagKeepAliveConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.1 | ScalararubaWiredMclagKeepAliveSrcIPAddrType | read-write | obsolete | The KeepAlive source address type. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.2 | ScalararubaWiredMclagKeepAliveSrcIPAddr | read-write | obsolete | The KeepAlive source address. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.3 | ScalararubaWiredMclagKeepAliveVrf | read-write | obsolete | The KeepAlive VRF domain. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.4 | ScalararubaWiredMclagKeepAliveUdpPort | read-write | obsolete | The KeepAlive UDP port. Same port is used as source and destination UDP ports. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.5 | ScalararubaWiredMclagKeepAlivePeerIPAddrType | read-write | obsolete | The KeepAlive peer address type. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.6 | ScalararubaWiredMclagKeepAlivePeerIPAddr | read-write | obsolete | The KeepAlive peer address. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.7 | ScalararubaWiredMclagKeepAliveHelloInterval | read-write | obsolete | KeepAlive hello interval in seconds. The default value is 1. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.8 | ScalararubaWiredMclagKeepAliveHelloTimeout | read-write | obsolete | KeepAlive hello timeout in seconds. The default value is 3. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.9 | ScalararubaWiredMclagKeepAliveDevicePriority | read-only | obsolete | Device priority that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.10 | ScalararubaWiredMclagKeepAliveSystemID | read-only | obsolete | Device identifier that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.11 | ScalararubaWiredMclagKeepAlivePlatformName | read-only | obsolete | Device type that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.12 | ScalararubaWiredMclagKeepAliveSwVersion | read-only | obsolete | S/W version that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3 | NodearubaWiredMclagAggregatorConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1 | TablearubaWiredMclagAggregatorTable | not-accessible | obsolete | This table supplements the table 'dot3adAggTable' in ieee802.3ad mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1 | RowarubaWiredMclagAggregatorEntry | not-accessible | obsolete | The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.1 | ColumnarubaWiredMclagAggregatorIndex | not-accessible | obsolete | The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects … |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.2 | ColumnarubaWiredMclagAggregatorType | read-create | obsolete | This field specifies the aggregator/lag type. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.3 | ColumnarubaWiredMclagVlanList | read-only | obsolete | VLANs that this aggregator is a member of. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.4 | ColumnarubaWiredMclagLoopProtectEnabled | read-only | obsolete | Loop Protect protocol admin state for this MCLAG. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.5 | ColumnarubaWiredMclagLoadBalanceScheme | read-only | obsolete | Load balance scheme configured for this MCLAG. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.6 | ColumnarubaWiredMclagCosOverride | read-only | obsolete | CoS override configuration for this MCLAG. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.7 | ColumnarubaWiredMclagDscpOverride | read-only | obsolete | DSCP override configuration for this MCLAG. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.8 | ColumnarubaWiredMclagQoSTrust | read-only | obsolete | Port QoS trust mode configured for this MCLAG. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2 | NodearubaWiredMclagStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1 | NodearubaWiredMclagIslStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.1 | ScalararubaWiredMclagIslOperState | read-only | obsolete | ISL operational state. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.2 | ScalararubaWiredMclagIslPduTx | read-only | obsolete | Number of ISL PDUs transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.3 | ScalararubaWiredMclagIslPduRx | read-only | obsolete | Number of ISL PDUs received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.4 | ScalararubaWiredMclagIslHelloTx | read-only | obsolete | Number of ISL Hello packets transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.5 | ScalararubaWiredMclagIslHelloRx | read-only | obsolete | Number of ISL Hello packets received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.6 | ScalararubaWiredMclagDeviceOperRole | read-only | obsolete | Operational role of this device derived based on device priority of the 2 devices. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.7 | ScalararubaWiredMclagDeviceOperSystemID | read-only | obsolete | System identifier used by this device - derived from system identifier values of the 2 devices. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2 | NodearubaWiredMclagKeepAliveStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.1 | ScalararubaWiredMclagKeepAliveOperState | read-only | obsolete | KeepAlive protocol operational state. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.2 | ScalararubaWiredMclagKeepAlivePacketsTx | read-only | obsolete | Number of KeepAlive protocol packets transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.3 | ScalararubaWiredMclagKeepAlivePacketsRx | read-only | obsolete | Number of KeepAlive protocol packets received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.4 | ScalararubaWiredMclagKeepAlivePacketsDrop | read-only | obsolete | Number of KeepAlive protocol packets dropped. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.5 | ScalararubaWiredMclagKeepAliveTimeoutCount | read-only | obsolete | Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.6 | ScalararubaWiredMclagKeepAliveLastEstablishedTime | read-only | obsolete | Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established. |
| 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.7 | ScalararubaWiredMclagKeepAliveLastFailedTime | read-only | obsolete | Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VidList | OCTET STRING (SIZE (512)) | obsolete | Each octet within this value specifies a set of eight VlanIIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit r… |