ARUBAWIRED-VSX-MIB
64 objects
This is the MIB module related to HPE Aruba VSX feature
Imported Objects
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.7 | IdentityarubaWiredVsxMIB | This is the MIB module related to HPE Aruba VSX feature | ||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1 | NodearubaWiredVsxConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1 | NodearubaWiredVsxIslConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.1 | ScalararubaWiredVsxIslPort | read-write | current | Interface name corresponding to the VSX InterSwitchLink port. A value of 0 means there is no ISL port configuration. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.2 | ScalararubaWiredVsxIslHelloInterval | read-write | current | ISLP hello interval in seconds. The default value is 1. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.3 | ScalararubaWiredVsxIslHoldTime | read-write | current | ISL port-flap hold time in seconds. The default value is 0. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.4 | ScalararubaWiredVsxIslHelloTimeout | read-write | current | ISL hello timeout in seconds. The default value is 3. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.5 | ScalararubaWiredVsxIslSystemID | read-only | current | Device identifier. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.6 | ScalararubaWiredVsxIslPlatformName | read-only | current | Device type. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.7 | ScalararubaWiredVsxIslSwVersion | read-only | current | S/W version running on the device type. This is advertised over ISL. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.8 | ScalararubaWiredVsxIslVIDList | read-only | current | VLAN IDs that the ISL port is a member of. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2 | NodearubaWiredVsxKeepAliveConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.1 | ScalararubaWiredVsxKeepAliveSrcIPAddrType | read-write | current | The KeepAlive source address type. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.2 | ScalararubaWiredVsxKeepAliveSrcIPAddr | read-write | current | The KeepAlive source address. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.3 | ScalararubaWiredVsxKeepAliveVrf | read-write | current | The KeepAlive VRF domain. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.4 | ScalararubaWiredVsxKeepAliveUdpPort | read-write | current | The KeepAlive UDP port. Same port is used as source and destination UDP ports. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.5 | ScalararubaWiredVsxKeepAlivePeerIPAddrType | read-write | current | The KeepAlive peer address type. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.6 | ScalararubaWiredVsxKeepAlivePeerIPAddr | read-write | current | The KeepAlive peer address. It can be IPv4 or IPv6. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.7 | ScalararubaWiredVsxKeepAliveHelloInterval | read-write | current | KeepAlive hello interval in seconds. The default value is 1. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.8 | ScalararubaWiredVsxKeepAliveHelloTimeout | read-write | current | KeepAlive hello timeout in seconds. The default value is 3. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.9 | ScalararubaWiredVsxKeepAliveSystemID | read-only | current | Device identifier that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.10 | ScalararubaWiredVsxKeepAlivePlatformName | read-only | current | Device type that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.11 | ScalararubaWiredVsxKeepAliveSwVersion | read-only | current | S/W version that will be advertised via KeepAlive protocol. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3 | NodearubaWiredVsxAggregatorConfig | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1 | TablearubaWiredVsxAggregatorTable | not-accessible | current | This table supplements the table 'dot3adAggTable' in ieee802.3ad mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1 | RowarubaWiredVsxAggregatorEntry | not-accessible | current | The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.1 | ColumnarubaWiredVsxAggregatorIndex | not-accessible | current | The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects … |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.2 | ColumnarubaWiredVsxAggregatorType | read-create | current | This field specifies the aggregator/lag type. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.3 | ColumnarubaWiredVsxVlanList | read-only | current | VLANs that this aggregator is a member of. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.4 | ColumnarubaWiredVsxLoopProtectEnabled | read-only | current | Loop Protect protocol admin state for this VSX. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.5 | ColumnarubaWiredVsxLoadBalanceScheme | read-only | current | Load balance scheme configured for this VSX. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.6 | ColumnarubaWiredVsxCosOverride | read-only | current | CoS override configuration for this VSX. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.7 | ColumnarubaWiredVsxDscpOverride | read-only | current | DSCP override configuration for this VSX. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.8 | ColumnarubaWiredVsxQoSTrust | read-only | current | Port QoS trust mode configured for this VSX. This is used for configuration consistency validation. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.4 | NodearubaWiredVsxGlobalConfiguration | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.1 | ScalararubaWiredVsxDeviceRole | read-only | current | VSX device role. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.2 | ScalararubaWiredVsxConfigSync | read-only | current | VSX config sync. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2 | NodearubaWiredVsxStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1 | NodearubaWiredVsxIslStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.1 | ScalararubaWiredVsxIslOperState | read-only | current | ISL operational state. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.2 | ScalararubaWiredVsxIslPduTx | read-only | current | Number of ISL PDUs transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.3 | ScalararubaWiredVsxIslPduRx | read-only | current | Number of ISL PDUs received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.4 | ScalararubaWiredVsxIslHelloTx | read-only | current | Number of ISL Hello packets transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.5 | ScalararubaWiredVsxIslHelloRx | read-only | current | Number of ISL Hello packets received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.6 | ScalararubaWiredVsxDeviceOperSystemID | read-only | current | System identifier used by this device - derived from system identifier values of the 2 devices. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2 | NodearubaWiredVsxKeepAliveStatus | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.1 | ScalararubaWiredVsxKeepAliveOperState | read-only | current | KeepAlive protocol operational state. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.2 | ScalararubaWiredVsxKeepAlivePacketsTx | read-only | current | Number of KeepAlive protocol packets transmitted by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.3 | ScalararubaWiredVsxKeepAlivePacketsRx | read-only | current | Number of KeepAlive protocol packets received by this device. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.4 | ScalararubaWiredVsxKeepAlivePacketsDrop | read-only | current | Number of KeepAlive protocol packets dropped. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.5 | ScalararubaWiredVsxKeepAliveTimeoutCount | read-only | current | Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.6 | ScalararubaWiredVsxKeepAliveLastEstablishedTime | read-only | current | Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.7 | ScalararubaWiredVsxKeepAliveLastFailedTime | read-only | current | Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed. |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3 | NodearubaWiredVsxNotifications | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1 | NodearubaWiredVsxTraps | |||
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1 | NotificationislUp | current | An islUp trap signifies that ISL transitioned to inSync state | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2 | NotificationislDown | current | An islDown trap signifies that ISL transitioned to outOfSync state | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3 | NotificationkeepAliveUp | current | A keepAliveUp trap signifies that KA is in established state | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4 | NotificationkeepAliveDown | current | A keepAliveDown trap signifies that KA is in failed state | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.5 | NotificationmclagLocalUpPeerUp | current | A mclagLocalUpPeerUp trap signifies that the McLAG is up in both the primary and secondary VSX devices. | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.6 | NotificationmclagLocalUpPeerDown | current | A mclagLocalUpPeerDown trap signifies that the McLAG is up in the local device but down in the peer VSX device. | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.7 | NotificationmclagLocalDownPeerUp | current | A mclagLocalDownPeerUp trap signifies that the McLAG is down in the local device but up in the peer VSX device. | |
| 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.8 | NotificationmclagLocalDownPeerDown | current | A mclagLocalDownPeerDown trap signifies that the McLAG is down in both the primary and secondary VSX devices. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VidList | OCTET STRING (SIZE (512)) | current | Each octet within this value specifies a set of eight VLAN index (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit r… |