ASAM-ALARM-MIB
187 objects
No module-level DESCRIPTION found.
Imported Objects
| ASAM-TC-MIB | NetworkTimeInSeconds |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| SNMPv2-TC | DisplayString |
| SYSTEM-MIB | asam |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.61.1.3 | NodeasamAlarmMIB | |||
| 1.3.6.1.4.1.637.61.1.3.1 | TableasamAlarmTable | not-accessible | mandatory | This table defines all the possible alarms at the agent. For each alarm, there is an entry. Each entry consists of an index for the table, alarm id, alarm cate… |
| 1.3.6.1.4.1.637.61.1.3.1.1 | RowasamAlarmEntry | not-accessible | mandatory | Entry for alarm table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.1.1.1 | ColumnasamAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of 2 distinct parts of information : the alarm type and the alarm number. The first half represents the… |
| 1.3.6.1.4.1.637.61.1.3.1.1.2 | ColumnasamAlarmCategory | read-only | mandatory | This object defines the category of an alarm. Alarm categories are defined in X.733 as Communications, QualityOfService, Processing Error, Equipment and Enviro… |
| 1.3.6.1.4.1.637.61.1.3.1.1.3 | ColumnasamAlarmSeverity | read-write | mandatory | This object is defined to assign a severity level to an alarm. This object may be indeterminate, warning, minor, major, critical and ignore. In case of severit… |
| 1.3.6.1.4.1.637.61.1.3.1.1.4 | ColumnasamAlarmServAffect | read-write | mandatory | This object defines whether an alarm is service affecting or not. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: YES DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.1.1.5 | ColumnasamAlarmOnThreshold | read-only | obsolete | This object defines the threshold value for an alarm to be ON. |
| 1.3.6.1.4.1.637.61.1.3.1.1.6 | ColumnasamAlarmOffThreshold | read-only | obsolete | This object defines the threshold value for an alarm to be OFF. |
| 1.3.6.1.4.1.637.61.1.3.1.1.7 | ColumnasamAlarmOnTimebase | read-only | obsolete | This object defines the number of miliseconds that the alarm should be persistant ON before it is reported ON. |
| 1.3.6.1.4.1.637.61.1.3.1.1.8 | ColumnasamAlarmOffTimebase | read-only | obsolete | This object defines the number of miliseconds that the alarm should be persistant OFF before it is reported OFF. |
| 1.3.6.1.4.1.637.61.1.3.1.1.9 | ColumnasamAlarmRepMode | read-write | mandatory | This object is defined to manage the reporting of the alarm. If it is disabled, the alarm is not reported to the SNMP Manager. If it is enabled, reporting to t… |
| 1.3.6.1.4.1.637.61.1.3.1.1.10 | ColumnasamAlarmLogMode | read-write | mandatory | This object is to manage the logging of the alarm. If this object is disabled, the alarm is not logged. If it is enabled, an alarm is logged in the AlarmLoggin… |
| 1.3.6.1.4.1.637.61.1.3.1.1.11 | ColumnasamAlarmEntryConfigState | read-only | mandatory | This object represents the status of configured values of the entry. It indicates whether a system created row contains all system init values (staticAllInitia… |
| 1.3.6.1.4.1.637.61.1.3.2 | ScalarasamAlarmChangeOccurredTrapEnable | read-write | obsolete | This object defines whether an internal trap should be sent to the Trap MIB when a alarm changed that has a severity equal or higher than the configured trap s… |
| 1.3.6.1.4.1.637.61.1.3.3 | ScalarasamNumberofAlarmChanges | read-only | mandatory | This object gives the number of changes that have occurred at the CurrentAlarmtable since startup. It is a wrap around counter between 0 and MAX. ALCATEL NOTE:… |
| 1.3.6.1.4.1.637.61.1.3.4 | ScalarasamNumberofAlarmEntries | read-only | mandatory | This object gives the number of entries in the Current Alarm Table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.5 | ScalarasamCurrentAlarmSeverityStatus | read-only | mandatory | This object indicating all active severities in the current alarm table (equal or higher than the configured severity level). They are represented as a bitmap … |
| 1.3.6.1.4.1.637.61.1.3.7 | TableasamCurrentAlarmTable | not-accessible | mandatory | This table contains the currently active alarms, ordered by severity (highest first). Each entry contains information on the alarm type, alarm status, two inde… |
| 1.3.6.1.4.1.637.61.1.3.7.1 | RowasamCurrentAlarmEntry | not-accessible | mandatory | Entry for CurrentAlarmTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.7.1.1 | ColumnasamCurrentAlarmIndex | read-only | mandatory | Index for a Current Alarm Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.7.1.2 | ColumnasamCurrentAlarmType | read-only | mandatory | This object defines the type of the alarms that are active in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNI… |
| 1.3.6.1.4.1.637.61.1.3.7.1.3 | ColumnasamCurrentAlarmStatus | read-only | mandatory | This object defines the current status of all alarms within one alarm type and one index1-index2 combination at that time. The alarms are represented in a bitm… |
| 1.3.6.1.4.1.637.61.1.3.7.1.4 | ColumnasamCurrentAlarmIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition, refer to … |
| 1.3.6.1.4.1.637.61.1.3.7.1.5 | ColumnasamCurrentAlarmIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: N… |
| 1.3.6.1.4.1.637.61.1.3.7.1.6 | ColumnasamCurrentAlarmPtr | read-only | obsolete | This object is currently not used. In future releases this object will be used to point to additional information. |
| 1.3.6.1.4.1.637.61.1.3.7.1.7 | ColumnasamCurrentAlarmTime | read-only | mandatory | This object gives the time in seconds when the entry was updated, respectively added. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFV… |
| 1.3.6.1.4.1.637.61.1.3.7.1.8 | ColumnasamCurrentAlarmAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.8 | ScalarasamAlarmLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: N… |
| 1.3.6.1.4.1.637.61.1.3.9 | ScalarasamAlarmLogReset | read-write | mandatory | This object is a button-like object to reset the alarm logging table. When it is set to the Reset value, the log table is cleared, and logging starts from inde… |
| 1.3.6.1.4.1.637.61.1.3.10 | ScalarasamAlarmLogResetTime | read-only | mandatory | Time value in seconds when the alarm log was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: seconds |
| 1.3.6.1.4.1.637.61.1.3.11 | ScalarasamAlarmLogSeverityLevel | read-write | mandatory | This object defines the lowest severity level an alarm must have in order to be logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: 1-5 PERSIST: YES DEFVAL… |
| 1.3.6.1.4.1.637.61.1.3.12 | ScalarasamAlarmLogBufferSize | read-only | mandatory | This object gives the size of the internal log buffer. This is useful information when an overflow of the log buffer occurs. ALCATEL NOTE: SUPPORT: YES INSRVMO… |
| 1.3.6.1.4.1.637.61.1.3.13 | ScalarasamAlarmLogFullAction | read-write | mandatory | This object defines the action to be taken when the alarm log buffer is completely full. If set to Wrap, then older log records are overwritten by recent ones.… |
| 1.3.6.1.4.1.637.61.1.3.14 | ScalarasamAlarmLogOverflowed | read-only | mandatory | This object indicates whether the log table is overflowed or not. When the log buffer is reset, this object is set to Notoverflowed. This object is not useful … |
| 1.3.6.1.4.1.637.61.1.3.15 | TableasamAlarmLogTable | not-accessible | mandatory | This table is used to log all alarm changes of alarms with a log status set to active and a severity level equal or higher than the configured logging severity… |
| 1.3.6.1.4.1.637.61.1.3.15.1 | RowasamAlarmLogEntry | not-accessible | mandatory | Entry for Alarm Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.15.1.1 | ColumnasamAlarmLogIndex | read-only | mandatory | Index for the entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.15.1.2 | ColumnasamAlarmLogAlarmType | read-only | mandatory | This object defines the type of the alarms in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.15.1.3 | ColumnasamAlarmLogAlarmStatus | read-only | mandatory | This object defines the status of all alarms within one alarm type and one index1-index2 combination for this logged entry. The alarms are represented in a bit… |
| 1.3.6.1.4.1.637.61.1.3.15.1.4 | ColumnasamAlarmLogStatusChange | read-only | mandatory | This object defines the difference in the status bitmap with its previous logged value. The bitpositions are conforming to the ones in the asamAlarmLogAlarmSta… |
| 1.3.6.1.4.1.637.61.1.3.15.1.5 | ColumnasamAlarmLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.15.1.6 | ColumnasamAlarmLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: N… |
| 1.3.6.1.4.1.637.61.1.3.15.1.7 | ColumnasamAlarmLogPtr | read-only | obsolete | This object is currently not used. In future releases this object will be used to point to additional information. |
| 1.3.6.1.4.1.637.61.1.3.15.1.8 | ColumnasamAlarmLogTime | read-only | mandatory | This object gives the time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: secon… |
| 1.3.6.1.4.1.637.61.1.3.15.1.9 | ColumnasamAlarmLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.15.1.10 | ColumnasamAlarmLogBasicAlarmId | read-only | mandatory | The meaning of this object depends on the value of asamAlarmLogAlarmType. The following situations are possible: 1. The value of the asamAlarmLogAlarmType obje… |
| 1.3.6.1.4.1.637.61.1.3.16 | ScalarasamAlarmSnapshotTableStatus | read-write | mandatory | Before reading the snapshot table, one must try to set this object to inUse first. When it is already in this state, the set will fail; when in the notInUse st… |
| 1.3.6.1.4.1.637.61.1.3.17 | ScalarasamAlarmSnapshotOwner | read-write | mandatory | This string can contain an identification of the owner who took the snapshot. When a manager wants to use the snapshot table, he can set this string with a mea… |
| 1.3.6.1.4.1.637.61.1.3.18 | ScalarasamAlarmSnapshotTimeout | read-only | mandatory | This object gives the timeout in msec on the snapshot table. The timer is started from the moment the snapshot table status is set to inUse. It will be set to … |
| 1.3.6.1.4.1.637.61.1.3.19 | ScalarasamAlarmSnapshotSeverityLevel | read-write | mandatory | This object indicates the lowest severity level of alarms that should be visible in the snapshot table. When the snapshot table status is in the notInUse state… |
| 1.3.6.1.4.1.637.61.1.3.20 | ScalarasamNumberOfAlarmSnapshotEntries | read-only | mandatory | When the snapshot table status is in the inUse state, this object reflects the number of entries in the snapshot table. If the snapshot table status is set to … |
| 1.3.6.1.4.1.637.61.1.3.21 | ScalarasamAlarmSnapshotSeverityStatus | read-only | mandatory | If the snapshot table status is set to notInUse, this object can not be read. If the snapshot table status is inUse, this object indicates all the active sever… |
| 1.3.6.1.4.1.637.61.1.3.22 | TableasamAlarmSnapshotTable | not-accessible | mandatory | This table is empty when the snapshot table status is set to notInUse. When a snapshot is taken (see the description of the snapshot table status object for a … |
| 1.3.6.1.4.1.637.61.1.3.22.1 | RowasamAlarmSnapshotEntry | not-accessible | mandatory | Entry for asamAlarmSnapshotTable. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.22.1.1 | ColumnasamAlarmSnapshotIndex | read-only | mandatory | Index for an Alarm Snapshot Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.22.1.2 | ColumnasamAlarmSnapshotType | read-only | mandatory | This object defines the type of the alarms in this entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.22.1.3 | ColumnasamAlarmSnapshotStatus | read-only | mandatory | This object defines the status of alarms in an alarm type at the time the snapshot was taken. The alarms are represented in a bitmap with the following bitposi… |
| 1.3.6.1.4.1.637.61.1.3.22.1.4 | ColumnasamAlarmSnapshotIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.22.1.5 | ColumnasamAlarmSnapshotIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: N… |
| 1.3.6.1.4.1.637.61.1.3.22.1.6 | ColumnasamAlarmSnapshotPtr | read-only | obsolete | This object is currently not used. In future releases this object will be used to point to additional information. |
| 1.3.6.1.4.1.637.61.1.3.22.1.7 | ColumnasamAlarmSnapshotTime | read-only | mandatory | This object gives the time information in seconds when the entry was updated, respectively added. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERS… |
| 1.3.6.1.4.1.637.61.1.3.22.1.8 | ColumnasamAlarmSnapshotAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.23 | ScalarasamNumberOfTotalChanges | read-only | mandatory | This counter represents the total number of changes of all alarms since startup. It is independent of the alarm severity level. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.24 | ScalarasamNumberOfIndeterminateChanges | read-only | mandatory | This counter represents the total number of changes of all alarms with a severity level Indeterminate since startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RA… |
| 1.3.6.1.4.1.637.61.1.3.25 | ScalarasamNumberOfWarningChanges | read-only | mandatory | This counter represents the total number of changes of all alarms with a severity level Warning since startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: S… |
| 1.3.6.1.4.1.637.61.1.3.26 | ScalarasamNumberOfMinorChanges | read-only | mandatory | This counter represents the total number of changes of all alarms with a severity level Minor since startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See… |
| 1.3.6.1.4.1.637.61.1.3.27 | ScalarasamNumberOfMajorChanges | read-only | mandatory | This counter represents the total number of changes of all alarms with a severity level Major since startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See… |
| 1.3.6.1.4.1.637.61.1.3.28 | ScalarasamNumberOfCriticalChanges | read-only | mandatory | This counter represents the total number of changes of all alarms with a severity level Critical since startup. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: … |
| 1.3.6.1.4.1.637.61.1.3.30 | ScalarasamAlarmTrapNumberOfAlarmChanges | read-only | deprecated | This counter represents the number of alarm changes (of alarms with a severity equal or higher than the configured trap severity) since startup. It is a wrapar… |
| 1.3.6.1.4.1.637.61.1.3.39 | ScalarasamAlarmTotalDeltaLogBufferSize | read-only | mandatory | This value indicates the maximum of distributed severity-specific delta log entries. This means that : asamAlarmIndeterminateDeltaLogBufferSize + asamAlarmWarn… |
| 1.3.6.1.4.1.637.61.1.3.40 | ScalarasamAlarmIndeterminateDeltaLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the Indeterminate delta log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PER… |
| 1.3.6.1.4.1.637.61.1.3.41 | ScalarasamAlarmIndeterminateDeltaLogReset | read-write | mandatory | This object is a button-like object to reset the Indeterminate delta logging table. When it is set to the reset value, the table is cleared, and logging starts… |
| 1.3.6.1.4.1.637.61.1.3.42 | ScalarasamAlarmIndeterminateDeltaLogResetTime | read-only | mandatory | Network time in seconds indicating when the Indeterminate Delta Log Table was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.43 | ScalarasamAlarmIndeterminateDeltaLogBufferSize | read-write | mandatory | This object gives the size of the internal Indeterminate Delta Log buffer. It can be set to a new (positive, non-zero) value, but when the sum of all severity-… |
| 1.3.6.1.4.1.637.61.1.3.44 | ScalarasamAlarmIndeterminateDeltaLogFullAction | read-write | mandatory | This object defines the action to be taken when the Indeterminate delta log buffer is completely full. If set to Wrap, older log records will be overwritten by… |
| 1.3.6.1.4.1.637.61.1.3.45 | ScalarasamAlarmIndeterminateDeltaLogOverflowed | read-only | mandatory | This object indicates whether the Indeterminate delta log table is overflowed or not. When the delta log buffer is reset, this object is set to notoverflowed. … |
| 1.3.6.1.4.1.637.61.1.3.46 | TableasamAlarmIndeterminateDeltaLogTable | not-accessible | mandatory | This table is to log all reported alarms with a severity equal to Indeterminate. The Logged records are ordered by time. The latest Indeterminate reported alar… |
| 1.3.6.1.4.1.637.61.1.3.46.1 | RowasamAlarmIndeterminateDeltaLogEntry | not-accessible | mandatory | Entry for the Indeterminate Delta Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.46.1.1 | ColumnasamAlarmIndeterminateDeltaLogIndex | read-only | mandatory | Index for an Indeterminate Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.46.1.2 | ColumnasamAlarmIndeterminateDeltaLogAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents th… |
| 1.3.6.1.4.1.637.61.1.3.46.1.3 | ColumnasamAlarmIndeterminateDeltaLogAlarmState | read-only | mandatory | This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.46.1.4 | ColumnasamAlarmIndeterminateDeltaLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.46.1.5 | ColumnasamAlarmIndeterminateDeltaLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.46.1.6 | ColumnasamAlarmIndeterminateDeltaLogPtr | read-only | obsolete | This object is currently not used. |
| 1.3.6.1.4.1.637.61.1.3.46.1.7 | ColumnasamAlarmIndeterminateDeltaLogTime | read-only | mandatory | This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNIT… |
| 1.3.6.1.4.1.637.61.1.3.46.1.8 | ColumnasamAlarmIndeterminateDeltaLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.46.1.9 | ColumnasamAlarmIndeterminateDeltaLogBasicAlarmId | read-only | mandatory | The meaning and use of this object depends on the value of the asamAlarmIndeterminateDeltaLogAlarmId. The following situations are possible: 1. asamAlarmIndete… |
| 1.3.6.1.4.1.637.61.1.3.47 | ScalarasamAlarmWarningDeltaLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the Warning delta log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: … |
| 1.3.6.1.4.1.637.61.1.3.48 | ScalarasamAlarmWarningDeltaLogReset | read-write | mandatory | This object is a button-like object to reset the Warning delta logging table. When it is set to the reset value, the table is cleared, and logging starts from … |
| 1.3.6.1.4.1.637.61.1.3.49 | ScalarasamAlarmWarningDeltaLogResetTime | read-only | mandatory | Network time in seconds indicating when the Warning Delta Log Table was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVAL… |
| 1.3.6.1.4.1.637.61.1.3.50 | ScalarasamAlarmWarningDeltaLogBufferSize | read-write | mandatory | This object gives the size of the internal Warning Delta Log buffer. It can be set to a new (positive, non-zero) value, but when the sum of all severity-specif… |
| 1.3.6.1.4.1.637.61.1.3.51 | ScalarasamAlarmWarningDeltaLogFullAction | read-write | mandatory | This object defines the action to be taken when the Warning delta log buffer is completely full. If set to Wrap, older log records will be overwritten by recen… |
| 1.3.6.1.4.1.637.61.1.3.52 | ScalarasamAlarmWarningDeltaLogOverflowed | read-only | mandatory | This object indicates whether the Warning delta log table is overflowed or not. When the delta log buffer is reset, this object is set to notoverflowed. This o… |
| 1.3.6.1.4.1.637.61.1.3.53 | TableasamAlarmWarningDeltaLogTable | not-accessible | mandatory | This table is to log all reported alarms with a severity equal to Warning. The Logged records are ordered by time. The latest Warning reported alarm change is … |
| 1.3.6.1.4.1.637.61.1.3.53.1 | RowasamAlarmWarningDeltaLogEntry | not-accessible | mandatory | Entry for the Warning Delta Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.53.1.1 | ColumnasamAlarmWarningDeltaLogIndex | read-only | mandatory | Index for a Warning Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.53.1.2 | ColumnasamAlarmWarningDeltaLogAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents th… |
| 1.3.6.1.4.1.637.61.1.3.53.1.3 | ColumnasamAlarmWarningDeltaLogAlarmState | read-only | mandatory | This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.53.1.4 | ColumnasamAlarmWarningDeltaLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.53.1.5 | ColumnasamAlarmWarningDeltaLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.53.1.6 | ColumnasamAlarmWarningDeltaLogPtr | read-only | obsolete | This object is currently not used. |
| 1.3.6.1.4.1.637.61.1.3.53.1.7 | ColumnasamAlarmWarningDeltaLogTime | read-only | mandatory | This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNIT… |
| 1.3.6.1.4.1.637.61.1.3.53.1.8 | ColumnasamAlarmWarningDeltaLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.53.1.9 | ColumnasamAlarmWarningDeltaLogBasicAlarmId | read-only | mandatory | The meaning and use of this object depends on the value of the asamAlarmWarningDeltaLogAlarmId. The following situations are possible: 1. asamAlarmWarningDelta… |
| 1.3.6.1.4.1.637.61.1.3.54 | ScalarasamAlarmMinorDeltaLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the Minor delta log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO… |
| 1.3.6.1.4.1.637.61.1.3.55 | ScalarasamAlarmMinorDeltaLogReset | read-write | mandatory | This object is a button-like object to reset the Minor delta logging table. When it is set to the reset value, the table is cleared, and logging starts from in… |
| 1.3.6.1.4.1.637.61.1.3.56 | ScalarasamAlarmMinorDeltaLogResetTime | read-only | mandatory | Network time in seconds indicating when the Minor Delta Log Table was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE… |
| 1.3.6.1.4.1.637.61.1.3.57 | ScalarasamAlarmMinorDeltaLogBufferSize | read-write | mandatory | This object gives the size of the internal Minor Delta Log buffer. It can be set to a new (positive, non-zero) value, but when the sum of all severity-specific… |
| 1.3.6.1.4.1.637.61.1.3.58 | ScalarasamAlarmMinorDeltaLogFullAction | read-write | mandatory | This object defines the action to be taken when the Minor delta log buffer is completely full. If set to Wrap, older log records will be overwritten by recent … |
| 1.3.6.1.4.1.637.61.1.3.59 | ScalarasamAlarmMinorDeltaLogOverflowed | read-only | mandatory | This object indicates whether the Minor delta log table is overflowed or not. When the delta log buffer is reset, this object is set to notoverflowed. This obj… |
| 1.3.6.1.4.1.637.61.1.3.60 | TableasamAlarmMinorDeltaLogTable | not-accessible | mandatory | This table is to log all reported alarms with a severity equal to Minor. The Logged records are ordered by time. The latest Minor reported alarm change is logg… |
| 1.3.6.1.4.1.637.61.1.3.60.1 | RowasamAlarmMinorDeltaLogEntry | not-accessible | mandatory | Entry for the Minor Delta Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.60.1.1 | ColumnasamAlarmMinorDeltaLogIndex | read-only | mandatory | Index for a Minor Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.60.1.2 | ColumnasamAlarmMinorDeltaLogAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents th… |
| 1.3.6.1.4.1.637.61.1.3.60.1.3 | ColumnasamAlarmMinorDeltaLogAlarmState | read-only | mandatory | This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.60.1.4 | ColumnasamAlarmMinorDeltaLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.60.1.5 | ColumnasamAlarmMinorDeltaLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.60.1.6 | ColumnasamAlarmMinorDeltaLogPtr | read-only | obsolete | This object is currently not used. |
| 1.3.6.1.4.1.637.61.1.3.60.1.7 | ColumnasamAlarmMinorDeltaLogTime | read-only | mandatory | This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNIT… |
| 1.3.6.1.4.1.637.61.1.3.60.1.8 | ColumnasamAlarmMinorDeltaLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.60.1.9 | ColumnasamAlarmMinorDeltaLogBasicAlarmId | read-only | mandatory | The meaning and use of this object depends on the value of the asamAlarmMinorDeltaLogAlarmId. The following situations are possible: 1. asamAlarmMinorDeltaLogA… |
| 1.3.6.1.4.1.637.61.1.3.61 | ScalarasamAlarmMajorDeltaLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the Major delta log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO… |
| 1.3.6.1.4.1.637.61.1.3.62 | ScalarasamAlarmMajorDeltaLogReset | read-write | mandatory | This object is a button-like object to reset the Major delta logging table. When it is set to the reset value, the table is cleared, and logging starts from in… |
| 1.3.6.1.4.1.637.61.1.3.63 | ScalarasamAlarmMajorDeltaLogResetTime | read-only | mandatory | Network time in seconds indicating when the Major Delta Log Table was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE… |
| 1.3.6.1.4.1.637.61.1.3.64 | ScalarasamAlarmMajorDeltaLogBufferSize | read-write | mandatory | This object gives the size of the internal Major Delta Log buffer. It can be set to a new (positive, non-zero) value, but when the sum of all severity-specific… |
| 1.3.6.1.4.1.637.61.1.3.65 | ScalarasamAlarmMajorDeltaLogFullAction | read-write | mandatory | This object defines the action to be taken when the Major delta log buffer is completely full. If set to Wrap, older log records will be overwritten by recent … |
| 1.3.6.1.4.1.637.61.1.3.66 | ScalarasamAlarmMajorDeltaLogOverflowed | read-only | mandatory | This object indicates whether the Major delta log table is overflowed or not. When the delta log buffer is reset, this object is set to notoverflowed. This obj… |
| 1.3.6.1.4.1.637.61.1.3.67 | TableasamAlarmMajorDeltaLogTable | not-accessible | mandatory | This table is to log all reported alarms with a severity equal to Major. The Logged records are ordered by time. The latest Major reported alarm change is logg… |
| 1.3.6.1.4.1.637.61.1.3.67.1 | RowasamAlarmMajorDeltaLogEntry | not-accessible | mandatory | Entry for the Major Delta Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.67.1.1 | ColumnasamAlarmMajorDeltaLogIndex | read-only | mandatory | Index for a Major Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.67.1.2 | ColumnasamAlarmMajorDeltaLogAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents th… |
| 1.3.6.1.4.1.637.61.1.3.67.1.3 | ColumnasamAlarmMajorDeltaLogAlarmState | read-only | mandatory | This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.67.1.4 | ColumnasamAlarmMajorDeltaLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.67.1.5 | ColumnasamAlarmMajorDeltaLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.67.1.6 | ColumnasamAlarmMajorDeltaLogPtr | read-only | obsolete | This object is currently not used. |
| 1.3.6.1.4.1.637.61.1.3.67.1.7 | ColumnasamAlarmMajorDeltaLogTime | read-only | mandatory | This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNIT… |
| 1.3.6.1.4.1.637.61.1.3.67.1.8 | ColumnasamAlarmMajorDeltaLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.67.1.9 | ColumnasamAlarmMajorDeltaLogBasicAlarmId | read-only | mandatory | The meaning and use of this object depends on the value of the asamAlarmMajorDeltaLogAlarmId. The following situations are possible: 1. asamAlarmMajorDeltaLogA… |
| 1.3.6.1.4.1.637.61.1.3.68 | ScalarasamAlarmCriticalDeltaLogLastEntry | read-only | mandatory | This object gives the index of the last entry that was added to the Critical delta log table. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST:… |
| 1.3.6.1.4.1.637.61.1.3.69 | ScalarasamAlarmCriticalDeltaLogReset | read-write | mandatory | This object is a button-like object to reset the Critical delta logging table. When it is set to the reset value, the table is cleared, and logging starts from… |
| 1.3.6.1.4.1.637.61.1.3.70 | ScalarasamAlarmCriticalDeltaLogResetTime | read-only | mandatory | Network time in seconds indicating when the Critical Delta Log Table was last reset. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVA… |
| 1.3.6.1.4.1.637.61.1.3.71 | ScalarasamAlarmCriticalDeltaLogBufferSize | read-write | mandatory | This object gives the size of the internal Critical Delta Log buffer. It can be set to a new (positive, non-zero) value, but when the sum of all severity-speci… |
| 1.3.6.1.4.1.637.61.1.3.72 | ScalarasamAlarmCriticalDeltaLogFullAction | read-write | mandatory | This object defines the action to be taken when the Critical delta log buffer is completely full. If set to Wrap, older log records will be overwritten by rece… |
| 1.3.6.1.4.1.637.61.1.3.73 | ScalarasamAlarmCriticalDeltaLogOverflowed | read-only | mandatory | This object indicates whether the Critical delta log table is overflowed or not. When the delta log buffer is reset, this object is set to notoverflowed. This … |
| 1.3.6.1.4.1.637.61.1.3.74 | TableasamAlarmCriticalDeltaLogTable | not-accessible | mandatory | This table is to log all reported alarms with a severity equal to Critical. The Logged records are ordered by time. The latest Critical reported alarm change i… |
| 1.3.6.1.4.1.637.61.1.3.74.1 | RowasamAlarmCriticalDeltaLogEntry | not-accessible | mandatory | Entry for the Critical Delta Log Table. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.74.1.1 | ColumnasamAlarmCriticalDeltaLogIndex | read-only | mandatory | Index for a Critical Delta Log Table Entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.74.1.2 | ColumnasamAlarmCriticalDeltaLogAlarmId | read-only | mandatory | This is the unique id for an alarm. It is a combination of two distinct parts of information: the alarm type and the alarm number. The first half represents th… |
| 1.3.6.1.4.1.637.61.1.3.74.1.3 | ColumnasamAlarmCriticalDeltaLogAlarmState | read-only | mandatory | This reflects the alarm state. When an alarm becomes active, the state will be active. If it dissappears, it will be nonActive. ALCATEL NOTE: SUPPORT: YES INSR… |
| 1.3.6.1.4.1.637.61.1.3.74.1.4 | ColumnasamAlarmCriticalDeltaLogIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition refer to t… |
| 1.3.6.1.4.1.637.61.1.3.74.1.5 | ColumnasamAlarmCriticalDeltaLogIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See the description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.74.1.6 | ColumnasamAlarmCriticalDeltaLogPtr | read-only | obsolete | This object is currently not used. |
| 1.3.6.1.4.1.637.61.1.3.74.1.7 | ColumnasamAlarmCriticalDeltaLogTime | read-only | mandatory | This object gives the network time in seconds when the alarm was logged. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNIT… |
| 1.3.6.1.4.1.637.61.1.3.74.1.8 | ColumnasamAlarmCriticalDeltaLogAddInfo | read-only | mandatory | This object is used to keep some additional information about the considered table entry. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO … |
| 1.3.6.1.4.1.637.61.1.3.74.1.9 | ColumnasamAlarmCriticalDeltaLogBasicAlarmId | read-only | mandatory | The meaning and use of this object depends on the value of the asamAlarmCriticalDeltaLogAlarmId. The following situations are possible: 1. asamAlarmCriticalDel… |
| 1.3.6.1.4.1.637.61.1.3.75 | ScalarasamAlarmNonItfReportingSeverity | read-write | mandatory | This objects specifies for all non interface related alarms the minimal severity for the alarm to be reported. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: 1… |
| 1.3.6.1.4.1.637.61.1.3.76 | TableasamAlarmFilterTable | not-accessible | mandatory | Static table, representing the alarm filters inside the ASAM. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP as described above |
| 1.3.6.1.4.1.637.61.1.3.76.1 | RowasamAlarmFilterEntry | not-accessible | mandatory | Entry of the asamAlarmFilterTable. Each row in the table contains management infornation applicable to a specific alarm filter inside the ASAM. ALCATEL NOTE: S… |
| 1.3.6.1.4.1.637.61.1.3.76.1.1 | ColumnasamAlarmFilterType | read-write | mandatory | Index in the asamAlarmFilterTable. This object is used to define the type of the considered alarm filter. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See ab… |
| 1.3.6.1.4.1.637.61.1.3.76.1.2 | ColumnasamAlarmFilterNumber | read-only | mandatory | Index in the asamAlarmFilterTable. This index, together with asamAlarmFilterType, uniquely identifies the considered alarm filter within the asamAlarmFilterTab… |
| 1.3.6.1.4.1.637.61.1.3.76.1.3 | ColumnasamAlarmFilterBasicAlarmId | read-write | mandatory | The value of this object corresponds to the unique identifica- tion of the basic alarm related to the considered alarm filter. Each alarm filter in the ASAM is… |
| 1.3.6.1.4.1.637.61.1.3.76.1.4 | ColumnasamAlarmFilterStatus | read-write | mandatory | This object is used by the operator to activate/deactivate a configured alarm filter. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: YES DEF… |
| 1.3.6.1.4.1.637.61.1.3.76.1.5 | ColumnasamAlarmFilterThreshold | read-write | mandatory | This object is used by the operator to specify the threshold value of the considered alarm filter. This value must be greater than 1 in order to make sense. Th… |
| 1.3.6.1.4.1.637.61.1.3.76.1.6 | ColumnasamAlarmFilterWindow | read-write | mandatory | This object is used by the operator to specify the duration (number of seconds) of the filtering window. This object only makes sense when the considered alarm… |
| 1.3.6.1.4.1.637.61.1.3.77 | NodeasamAlarmReport | |||
| 1.3.6.1.4.1.637.61.1.3.77.1 | ScalarasamAlarmReportId | read-only | mandatory | This is the unique id for the alarm that was last raised or cleared. It is a combination of 2 distinct parts of information : the alarm type and the alarm numb… |
| 1.3.6.1.4.1.637.61.1.3.77.2 | ScalarasamAlarmReportAlarmState | read-only | mandatory | This reflects the alarm state of the last raised or cleared alarm. When an alarm becomes active, the state will be active. If it dissappears, it will be nonAct… |
| 1.3.6.1.4.1.637.61.1.3.77.3 | ScalarasamAlarmReportSeverity | read-only | mandatory | This reflects the severity level of the last raised or cleared alarm. This severity may be indeterminate, warning, minor, major and critical. ALCATEL NOTE: SUP… |
| 1.3.6.1.4.1.637.61.1.3.77.4 | ScalarasamAlarmReportIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the last raised or cleared alarm occurred. For more information regarding the inde… |
| 1.3.6.1.4.1.637.61.1.3.77.5 | ScalarasamAlarmReportIndex2 | read-only | mandatory | This object is used in conjunction with Index1. Together they identify where the last raised or cleared alarm occurred. For more information regarding the inde… |
| 1.3.6.1.4.1.637.61.1.3.77.6 | ScalarasamAlarmReportTime | read-only | mandatory | This object gives the time in seconds when the last alarm has changed state (either raised or cleared). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See abov… |
| 1.3.6.1.4.1.637.61.1.3.77.7 | ScalarasamAlarmReportAddInfo | read-only | mandatory | This object is used to keep some additional information about the last raised or cleared alarm. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIS… |
| 1.3.6.1.4.1.637.61.1.3.78 | TableasamAlarmQueryTable | not-accessible | mandatory | This table is used to retrieve all the reported alarms by filters. For each alarm, there is an entry. Each entry includes the detailed informations for this al… |
| 1.3.6.1.4.1.637.61.1.3.78.1 | RowasamAlarmQueryEntry | not-accessible | mandatory | Entry for the alarm query table. Each row in the table contains the detailed information and status for each alarm. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.4.1.637.61.1.3.78.1.1 | ColumnasamAlarmQueryAlarmId | read-only | mandatory | This is the alarm identification. It's a 32bit integer and the scheme is described as following: ==================================== | bit31 ~ bit16 | | bit15… |
| 1.3.6.1.4.1.637.61.1.3.78.1.2 | ColumnasamAlarmQueryAid | read-only | mandatory | This reflects the alarm index. If the operator wants to show the specific alarm, it stands for the alarm index1 defined in alarm table. If the operator wants t… |
| 1.3.6.1.4.1.637.61.1.3.78.1.3 | ColumnasamAlarmQuerySeverity | read-only | mandatory | This reflects the severity level of the last raised or cleared alarm. This severity may be indeterminate, warning, minor, major critical and all. 0-all level, … |
| 1.3.6.1.4.1.637.61.1.3.78.1.4 | ColumnasamAlarmQueryServAff | read-only | mandatory | This reflects the sevice affecting or not in query alarm filter. 0-all affecting, 1-service-affecting, 2-not service affecting ALCATEL NOTE: SUPPORT: YES INSRV… |
| 1.3.6.1.4.1.637.61.1.3.78.1.5 | ColumnasamAlarmQueryType | read-only | mandatory | This defined the alarm type. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.78.1.6 | ColumnasamAlarmQueryLocation | read-only | mandatory | This object is used in alarm location. It is only suitable for various DSL alarms 1-near-end, 2-far-end, 3-middle-end, 4-line, 5-null ALCATEL NOTE: SUPPORT: YE… |
| 1.3.6.1.4.1.637.61.1.3.78.1.7 | ColumnasamAlarmQueryDirection | read-only | mandatory | This object is used in alarm direction. It is only suitable for various DSL alarms. 1-received, 2-transmit, 3-null ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANG… |
| 1.3.6.1.4.1.637.61.1.3.78.1.8 | ColumnasamAlarmQueryTime | read-only | mandatory | This object gives the time in seconds when the last alarm has changed state (either raised or cleared). ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See abov… |
| 1.3.6.1.4.1.637.61.1.3.78.1.9 | ColumnasamAlarmQueryAidInfo | read-only | mandatory | This object is used to show AID parameter in string ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: - |
| 1.3.6.1.4.1.637.61.1.3.78.1.10 | ColumnasamAlarmQueryInfo | read-only | mandatory | This object is used to keep some additional information about the queried alarm. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.3.78.1.11 | ColumnasamAlarmQueryIndex1 | read-only | mandatory | This object is used in conjunction with Index2. Together they identify where the alarm occurred. For more information regarding the index definition, refer to … |
| 1.3.6.1.4.1.637.61.1.3.78.1.12 | ColumnasamAlarmQueryIndex2 | read-only | mandatory | This object is used in conjunction with Index1. See description of Index1 for further info. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: N… |