ASANTE-AH1012-MIB
215 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress NetworkAddress private TimeTicks |
| SNMPv2-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.298 | Nodeasante | |||
| 1.3.6.1.4.1.298.1 | Nodeproducts | |||
| 1.3.6.1.4.1.298.1.1 | NodesnmpAgent | |||
| 1.3.6.1.4.1.298.1.1.1 | NodeagentSw | |||
| 1.3.6.1.4.1.298.1.1.1.1 | ScalaragentRunTimeImageMajorVer | read-only | mandatory | The major software version number of the agent run time image. |
| 1.3.6.1.4.1.298.1.1.1.2 | ScalaragentRunTimeImageMinorVer | read-only | mandatory | The minor software version number of the agent run time image. |
| 1.3.6.1.4.1.298.1.1.1.3 | ScalaragentImageLoadMode | read-write | mandatory | Tells hub whether the software image is to be loaded from the FLASH EPROM or from over the network. |
| 1.3.6.1.4.1.298.1.1.1.4 | ScalaragentRemoteBootInfo | read-only | mandatory | The method for getting boot parameter information. |
| 1.3.6.1.4.1.298.1.1.1.5 | ScalaragentRemoteBootProtocol | read-write | mandatory | The netboot protocol that used to load the agent software. |
| 1.3.6.1.4.1.298.1.1.1.6 | ScalaragentRemoteBootFile | read-write | mandatory | The boot file name that is sent to the boot file server by agent boot code during boot time. |
| 1.3.6.1.4.1.298.1.1.1.7 | ScalaragentOutBandDialString | read-write | mandatory | This is the initialization string used by the Network Management station to establish the out-of-band connection for modem only. |
| 1.3.6.1.4.1.298.1.1.1.8 | ScalaragentOutBandBaudRate | read-write | mandatory | The baud rate setting for the out-of-band port. |
| 1.3.6.1.4.1.298.1.1.1.9 | ScalaragentReset | read-write | mandatory | The object to allow software to perform 'push_button' system reset. |
| 1.3.6.1.4.1.298.1.1.2 | NodeagentFw | |||
| 1.3.6.1.4.1.298.1.1.2.1 | ScalaragentFwMajorVer | read-only | mandatory | The major firmware version number of the agent prom code. |
| 1.3.6.1.4.1.298.1.1.2.2 | ScalaragentFwMinorVer | read-only | mandatory | The minor firmware version number of the agent prom code. |
| 1.3.6.1.4.1.298.1.1.3 | NodeagentHw | |||
| 1.3.6.1.4.1.298.1.1.3.1 | ScalaragentHwReVer | read-only | mandatory | The hardware reversion number of the network management module. |
| 1.3.6.1.4.1.298.1.1.3.2 | ScalaragentHwVer | read-only | mandatory | The hardware model number of the network management module |
| 1.3.6.1.4.1.298.1.1.4 | ScalaragentNetProtoStkCapMap | read-only | mandatory | This octet string represents the current protocol stack configuration supported by the agent, encoded as a bit string. Each protocol stack is represented by a … |
| 1.3.6.1.4.1.298.1.1.5 | NodeagentNetProtocol | |||
| 1.3.6.1.4.1.298.1.1.5.1 | NodeipagentProtocol | |||
| 1.3.6.1.4.1.298.1.1.5.1.1 | ScalaripagentIpAddr | read-write | mandatory | The ipagent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take e… |
| 1.3.6.1.4.1.298.1.1.5.1.2 | ScalaripagentIpNetMask | read-write | mandatory | The ipagent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter wil… |
| 1.3.6.1.4.1.298.1.1.5.1.3 | ScalaripagentDefaultGateway | read-write | mandatory | The ipagent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRo… |
| 1.3.6.1.4.1.298.1.1.5.1.4 | ScalaripagentBootServerAddr | read-write | mandatory | The IP address of the boot server that was used for booting this ipagent. This parameter will always be updated in the EEPROM. |
| 1.3.6.1.4.1.298.1.1.5.1.5 | ScalaripagentUnAuthIP | read-only | mandatory | The IP address of the last station that tried to access this ipagent with an invalid community string. |
| 1.3.6.1.4.1.298.1.1.5.1.6 | ScalaripagentUnAuthComm | read-only | mandatory | The community string of the last station that tried to access this ipagent with an invalid community string. |
| 1.3.6.1.4.1.298.1.1.5.2 | TableipagentTrapRcvrTable | not-accessible | mandatory | Table consisting of the list of Network Management Stations that are to receive traps generated by this agent. |
| 1.3.6.1.4.1.298.1.1.5.2.1 | RowipagentTrapRcvrEntry | not-accessible | mandatory | Destination IP address and community string for a particular trap server. |
| 1.3.6.1.4.1.298.1.1.5.2.1.1 | ColumnipagentTrapRcvrIpAddr | read-only | mandatory | IP address for trap server receiving trap. |
| 1.3.6.1.4.1.298.1.1.5.2.1.2 | ColumnipagentTrapRcvrStatus | read-write | mandatory | Validation of individual trap receiver. If value of this object is set to invalid(3), then that particular entry is deemed invalid, meaning that the address fo… |
| 1.3.6.1.4.1.298.1.1.5.2.1.3 | ColumnipagentTrapRcvrComm | read-write | mandatory | Community string for traps sent to this trap receiver. |
| 1.3.6.1.4.1.298.1.2 | NodeadaptCard | |||
| 1.3.6.1.4.1.298.1.3 | Nodeconcentrator | |||
| 1.3.6.1.4.1.298.1.3.1 | NodeconcChassis | |||
| 1.3.6.1.4.1.298.1.3.1.1 | NodeconcBasicGrp | |||
| 1.3.6.1.4.1.298.1.3.1.1.1 | ScalarconcChassisType | read-only | mandatory | The concentrator's chassis type. |
| 1.3.6.1.4.1.298.1.3.1.1.2 | ScalarconcChassisBkplType | read-only | mandatory | The concentrator's chassis backplane type. |
| 1.3.6.1.4.1.298.1.3.1.1.3 | ScalarconcChassisBkplRev | read-only | mandatory | The concentrator's chassis backplane revision number. |
| 1.3.6.1.4.1.298.1.3.1.1.4 | TableconcChassisPsTable | not-accessible | mandatory | This table contains concentrator's power supply information. |
| 1.3.6.1.4.1.298.1.3.1.1.4.1 | RowconcChassisPsEntry | not-accessible | mandatory | The entry in the table containing the information about a single power supply. |
| 1.3.6.1.4.1.298.1.3.1.1.4.1.1 | ColumnconcChassisPsIndex | read-only | mandatory | The value of this object identifies the power supply table for which this entry contains power supply type and status. |
| 1.3.6.1.4.1.298.1.3.1.1.4.1.2 | ColumnconcChassisPsModuleType | read-only | mandatory | The value of this object identifies the power supply module type. |
| 1.3.6.1.4.1.298.1.3.1.1.4.1.3 | ColumnconcChassisPsStatus | read-only | mandatory | The value of this object identifies the power supply module status. |
| 1.3.6.1.4.1.298.1.3.1.1.5 | ScalarconcChassisFanStatus | read-only | mandatory | The value of this object identifies the fan status. |
| 1.3.6.1.4.1.298.1.3.1.1.6 | ScalarconcChassisGroupCapacity | read-only | mandatory | The number of groups that can be contained within the concentrator. |
| 1.3.6.1.4.1.298.1.3.1.1.7 | ScalarconcChassisGroupMap | read-only | mandatory | This octet string represents the current configuration of groups, encoded as a bit string, each group is represented by a single bit. |
| 1.3.6.1.4.1.298.1.3.1.1.8 | TableconcChassisGrpTable | not-accessible | mandatory | A table that contains information about the group/slot in this chassis. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1 | RowconcChassisGrpEntry | not-accessible | mandatory | A list of information for each slot in this chassis. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1.1 | ColumnconcChassisGrpIndex | read-only | mandatory | The value of this object identifies the chassis group table for which this entry contains group related information. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1.2 | ColumnconcChassisGrpNumberPort | read-only | mandatory | The number of port is available for up/down link within this group. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1.3 | ColumnconcChassisGrpType | read-only | mandatory | The value represents the function of this group. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1.4 | ColumnconcChassisGrpDescr | read-only | mandatory | A description of this group device. |
| 1.3.6.1.4.1.298.1.3.1.1.8.1.5 | ColumnconcChassisGrpHwRev | read-only | mandatory | The hardware revision number of this particular group. |
| 1.3.6.1.4.1.298.1.3.2 | NodeconcConfiguration | |||
| 1.3.6.1.4.1.298.1.3.2.1 | NodeeSmartHubConfig | |||
| 1.3.6.1.4.1.298.1.3.2.1.1 | ScalareSmartHubId | read-only | mandatory | Hub MAC address (octet string) found from prom chip in hub. |
| 1.3.6.1.4.1.298.1.3.2.1.2 | ScalareSmartHubAssignedId | read-only | mandatory | Assigned hub ID for Out-of-Band. |
| 1.3.6.1.4.1.298.1.3.2.1.3 | ScalareSmartHubTerSwitch | read-only | mandatory | Status of position of PC/terminal switch located on rear panel of hub. Switches between serial and parallel communications for modem/PC or terminal connection … |
| 1.3.6.1.4.1.298.1.3.2.1.4 | ScalareSmartHubHwLoadPatStatus | read-write | mandatory | Which logic configuration pattern is loaded into the Programmable Logic Device PLD. |
| 1.3.6.1.4.1.298.1.3.2.1.5 | ScalareSmartHubHwLoadPatCapacity | read-only | mandatory | What kind of function the PLD can perform. |
| 1.3.6.1.4.1.298.1.3.2.1.6 | ScalareSmartHubNodeAgeTimer | read-write | mandatory | How long to keep node entry in node summary table, measured in sec. The maximum is 11 hours. |
| 1.3.6.1.4.1.298.1.3.2.1.7 | ScalareSmartHub3in1LnConStatus | read-only | mandatory | Status of 3In1 Uplink which is located on rear panel of hub. Describes the physical link type or types currently connected. |
| 1.3.6.1.4.1.298.1.3.2.1.8 | ScalareSmartHub3in1StateCtrl | read-write | mandatory | Whether using Auto-sense or manually selected a particular media type for the uplink connection. If using Auto-sense it first tries AUI. If AUI is not present … |
| 1.3.6.1.4.1.298.1.3.3 | NodeconcStatistics | |||
| 1.3.6.1.4.1.298.1.3.3.1 | NodeeStatistics | |||
| 1.3.6.1.4.1.298.1.3.3.1.1 | NodeeGlobalStatistics | |||
| 1.3.6.1.4.1.298.1.3.3.1.1.1 | ScalareGlobalHubReadableFrames | read-only | mandatory | Global counter of good or readable frames for this hub. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.1.2 | ScalareGlobalHubMcastFrames | read-only | mandatory | Global counter of number of multicast frames for this hub. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not inclu… |
| 1.3.6.1.4.1.298.1.3.3.1.1.3 | ScalareGlobalHubBcastFrames | read-only | mandatory | Global counter of number of broadcast frames for his hub. All 1s in network destination address. Multicast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.1.4 | ScalareGlobalHubFrameTooLongs | read-only | mandatory | Global counter, for this hub, of data frames longer than 1518 bytes, with a SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.1.5 | ScalareGlobalHubRunts | read-only | mandatory | Global counter, for this hub, of data frames with size less than 64 bytes, with no CRC or alignment errors. |
| 1.3.6.1.4.1.298.1.3.3.1.1.6 | ScalareGlobalHubAlignmentErrors | read-only | mandatory | Global counter, for this hub, of frames which are not integer multiples of 1 byte. |
| 1.3.6.1.4.1.298.1.3.3.1.1.7 | ScalareGlobalHubFragmentErrors | read-only | mandatory | Global counter, for this hub, of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). |
| 1.3.6.1.4.1.298.1.3.3.1.1.8 | ScalareGlobalHubFCSErrors | read-only | mandatory | Global counter, for this hub, of frames that failed Cyclic Redundancy Check (CRC). |
| 1.3.6.1.4.1.298.1.3.3.1.1.9 | ScalareGlobalHubIFGErrors | read-only | mandatory | Global counter, for this hub, of occurrences of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. |
| 1.3.6.1.4.1.298.1.3.3.1.1.10 | ScalareGlobalHubDataRateMismatchs | read-only | mandatory | Global counter, for this hub, of errors where incoming data rate is not with in the tolerance level of 10MHZ + or - 0.01%. |
| 1.3.6.1.4.1.298.1.3.3.1.1.11 | ScalareGlobalHubShortEvents | read-only | mandatory | Global counter, for this hub, of data burst where data is less than 10 bytes in length, with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.1.12 | ScalareGlobalHubCollisions | read-only | mandatory | Global counter of collision flags, for this hub. |
| 1.3.6.1.4.1.298.1.3.3.1.1.13 | ScalareGlobalHubLateCollisions | read-only | mandatory | Global counter, for this hub, of collisions occurring after the 64 byte collision window. |
| 1.3.6.1.4.1.298.1.3.3.1.1.14 | ScalareGlobalHubMJLPs | read-only | mandatory | Global counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. |
| 1.3.6.1.4.1.298.1.3.3.1.1.15 | ScalareGlobalHubAutoPartitions | read-only | mandatory | Global counter, for this hub, of all ports including 3in1 port being partitioned from network in response to 31 or more continuous collisions. |
| 1.3.6.1.4.1.298.1.3.3.1.1.16 | ScalareGlobalHubSFDMissings | read-only | mandatory | Global counter, for this hub, of a burst of data greater than or equal to 10 bytes in length with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.1.17 | ScalareGlobalHubBadFrames | read-only | mandatory | Global counter, for this hub, of total errored frame including toolong, runts, misaligned, or bad FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.3 | TableeGrpStatisticsTable | not-accessible | mandatory | Table of statistical information for each group. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1 | RoweGrpStatisticsEntry | not-accessible | mandatory | Entry for individual group in table. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.1 | ColumneGrpStatIndex | read-only | mandatory | The value of this object identifies the group for which this entry contains group statistical information. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.2 | ColumneGrpStatReadableFrames | read-only | mandatory | Group counter of 'good' or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.3 | ColumneGrpStatMcastFrames | read-only | mandatory | Group counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.4 | ColumneGrpStatBcastFrames | read-only | mandatory | Group counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.5 | ColumneGrpStatFrameTooLongs | read-only | mandatory | Group counter for data frames longer than 1518 bytes, with a SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.6 | ColumneGrpStatRunts | read-only | mandatory | Group counter for data frames with size less than 64 bytes, with no CRC or alignment errors. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.7 | ColumneGrpStatAlignmentErrors | read-only | mandatory | Group counter of frames which are not integer multiples of 1 byte . |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.8 | ColumneGrpStatFragmentErrors | read-only | mandatory | Group counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.9 | ColumneGrpStatFCSErrors | read-only | mandatory | Group counter frames that failed Cyclic Redundancy Check (CRC). |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.10 | ColumneGrpStatIFGErrors | read-only | mandatory | Group counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.11 | ColumneGrpStatDataRateMismatchs | read-only | mandatory | Group counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.12 | ColumneGrpStatShortEvents | read-only | mandatory | Group counter of data burst where data is less than 10 bytes in length, with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.13 | ColumneGrpStatCollisions | read-only | mandatory | Group counter of collision flags. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.14 | ColumneGrpStatLateCollisions | read-only | mandatory | Group counter of collisions occurring after the 64 byte collision window. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.15 | ColumneGrpStatMJLPs | read-only | mandatory | Group counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.16 | ColumneGrpStatAutoPartitions | read-only | mandatory | Group counter of ports in group autopartitioned in response to 31 or more continuous collisions. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.17 | ColumneGrpStatSFDMissings | read-only | mandatory | Group counter of a burst of data greater than or equal to 10 bytes in length with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.3.1.18 | ColumneGrpStatBadFrames | read-only | mandatory | Group counter of total errored frames including toolong, runts, misaligned, or bad FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.4 | TableePortStatisticsTable | not-accessible | mandatory | Table for port specific network statistics. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1 | RowePortStatisticsEntry | not-accessible | mandatory | Entry for individual port in table. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.1 | ColumnePortGrpIndex | read-only | mandatory | The value of this object identifies the group for which this entry contains port statistical information. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.2 | ColumnePortIndex | read-only | mandatory | The value of this object identifies the port for which this entry contains port statistical information. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.3 | ColumnePortStatReadableFrames | read-only | mandatory | Port counter of good or readable frames. Frame is between 64 and 1518 bytes in length and has SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.4 | ColumnePortStatMcastFrames | read-only | mandatory | Port counter of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.5 | ColumnePortStatBcastFrames | read-only | mandatory | Port counter of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.6 | ColumnePortStatFrameTooLongs | read-only | mandatory | Port counter for data frames longer than 1518 bytes, with a SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.7 | ColumnePortStatRunts | read-only | mandatory | Port counter for data frames with size less than 64 bytes, with no CRC or alignment errors. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.8 | ColumnePortStatAlignmentErrors | read-only | mandatory | Port counter of frames which are not integer multiples of 1 byte. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.9 | ColumnePortStatFragmentErrors | read-only | mandatory | Port counter of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.10 | ColumnePortStatFCSErrors | read-only | mandatory | Port counter of frames that failed Cyclic Redundancy Check (CRC). |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.11 | ColumnePortStatIFGErrors | read-only | mandatory | Port counter of Interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.12 | ColumnePortStatDataRateMismatchs | read-only | mandatory | Port counter of errors where incoming data rate is not with in the tolerance level of 10 MHZ + or - 0.01%. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.13 | ColumnePortStatShortEvents | read-only | mandatory | Port counter of data burst where data is less than 10 bytes in length, with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.14 | ColumnePortStatCollisions | read-only | mandatory | Port counter of collision flags. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.15 | ColumnePortStatLateCollisions | read-only | mandatory | Port counter of collisions occurring after the 64 byte collision window. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.16 | ColumnePortStatMJLPs | read-only | mandatory | Port counter of MAU jabber lockup protection where hub repeater chip goes into lockup state. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.17 | ColumnePortStatAutoPartitions | read-only | mandatory | Port counter of number of times port was autopartitioned in response to 31 or more continuous collisions. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.18 | ColumnePortStatSFDMissings | read-only | mandatory | Port counter of a burst of data greater than or equal to 10 bytes in length with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.4.1.19 | ColumnePortStatBadFrames | read-only | mandatory | Port counter of total errored frames including toolong, runts, misaligned, or bad FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.5 | TableeTrafficMatrixTable | not-accessible | mandatory | Table to analyze the number of packets received through network traffic by the size of each packet. |
| 1.3.6.1.4.1.298.1.3.3.1.5.1 | RoweTrafficMatrixEntry | not-accessible | mandatory | Individual entry in matrix of packet lengths table. |
| 1.3.6.1.4.1.298.1.3.3.1.5.1.1 | ColumneTrafficMatrixLength | read-only | mandatory | Starting length for each range in table. |
| 1.3.6.1.4.1.298.1.3.3.1.5.1.2 | ColumneTrafficMatrixRange | read-only | mandatory | Range of packet sizes to be scanned for in network traffic. |
| 1.3.6.1.4.1.298.1.3.3.1.5.1.3 | ColumneTrafficMatrixFramesCounts | read-only | mandatory | Counter for number of frames received for particular range specified by the MatrixRange. |
| 1.3.6.1.4.1.298.1.3.3.1.6 | NodeeSpecific | |||
| 1.3.6.1.4.1.298.1.3.3.1.6.1 | NodeeSmartHubSpec | |||
| 1.3.6.1.4.1.298.1.3.3.1.6.1.1 | ScalareColGraphBar | read-only | mandatory | Information on hardware LED collision graph bar. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.2 | ScalareUtilGraphBar | read-only | mandatory | Information on hardware LED for utilization graph bar. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6 | TableePortRateTable | not-accessible | optional | Network statistics for individual ports measured in Rate/Second. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1 | RowePortRateEntry | not-accessible | optional | Individual entry in port rate table. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.1 | ColumnePortRateGrpIndex | read-only | optional | The value of this object identifies the group for which this entry contains port statistical information. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.2 | ColumnePortRatePortIndex | read-only | optional | This value identifies the port for which this entry contains port statistical information. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.3 | ColumnePortRateReadableFrames | read-only | optional | Rate of occurrence of good or readable frames. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.4 | ColumnePortRateMcastFrames | read-only | optional | Rate of occurrence of number of muliticast frames. 1st bit in highest ordered bytes of destination address is set to 1. Broadcast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.5 | ColumnePortRateBcastFrames | read-only | optional | Rate of occurrence of number of broadcast frames. All 1s in network destination address. Multicast packets are not included. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.6 | ColumnePortRateFrameTooLongs | read-only | optional | Rate of occurrence of data frames longer than 1518 bytes, with a SFD and good FCS. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.7 | ColumnePortRateRunts | read-only | optional | Rate of occurrence of data frames with size less than 64 bytes, with no CRC or alignment errors. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.8 | ColumnePortRateAlignmentErrors | read-only | optional | Rate of occurrence of frames which are not integer multiples of 1 byte. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.9 | ColumnePortRateFragmentErrors | read-only | optional | Rate of occurrence of frames greater than 2 bytes and less than 64 bytes, with SFD and bad FCS (CRC error). |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.10 | ColumnePortRateFCSErrors | read-only | optional | Rate of occurrence of frames that failed Cyclic Redundancy Check (CRC). |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.11 | ColumnePortRateIFGErrors | read-only | optional | Rate of occurrence of interframe Gap Errors where time period between data frames is less than 5.5 micro seconds. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.12 | ColumnePortRateDataRateMismatch | read-only | optional | Rate of occurrence of errors where incoming data rate is not with in the tolerance level of 10 MHz + or - 0.01%. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.13 | ColumnePortRateShortEvents | read-only | optional | Rate of occurrence of data burst where data is less than 10 bytes in length, with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.14 | ColumnePortRateCollisions | read-only | optional | Rate of occurrence of collision flags. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.15 | ColumnePortRateLateCollisions | read-only | optional | Rate of occurrence of collisions occurring after the 64 byte collision window. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.16 | ColumnePortRateMJLPs | read-only | optional | Rate of occurrence of MAU jabber lockup protection where hub repeater chip goes into lockup state. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.17 | ColumnePortRateAutoPartitions | read-only | optional | Rate of occurrence of times port was autopartitioned in response to 31 or more continuous collisions. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.18 | ColumnePortRateSFDMissings | read-only | optional | Rate of occurrence of a burst of data greater than or equal to 10 bytes in length with no SFD. |
| 1.3.6.1.4.1.298.1.3.3.1.6.1.6.1.19 | ColumnePortRateBadFrames | read-only | optional | Rate of occurrence of total errored frames including toolong, runts, misaligned, or bad FCS. |
| 1.3.6.1.4.1.298.1.3.4 | NodeconcStateCtrl | |||
| 1.3.6.1.4.1.298.1.3.4.1 | NodeeStateCtrl | |||
| 1.3.6.1.4.1.298.1.3.4.1.1 | TableePortStateCtrlTable | not-accessible | mandatory | Table for port control parameters. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1 | RowePortStateCtrlEntry | not-accessible | mandatory | Individual entry of port control in table. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.1 | ColumnePortStateGrpIndex | read-only | mandatory | The value of this object identifies the group for which this entry contains port control information. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.2 | ColumnePortStatePortIndex | read-only | mandatory | This value identifies the port for which this entry contains port control information. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.3 | ColumnePortStateType | read-only | mandatory | Type of cabling physically connected to port. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.4 | ColumnePortStateLinkStatus | read-only | mandatory | Link status for particular port. On=physical link if link test enabled. Off=no physical link exists or link test is disabled. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.5 | ColumnePortStateLinkIntegTest | read-write | mandatory | Set can enable or disabled link integrity test. Get will say if link integrity test is enabled (2) or disabled (3). |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.6 | ColumnePortStateAutoPartStatus | read-only | mandatory | Whether port has been autopartitioned (2) or not autopartitioned (3). |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.7 | ColumnePortStateJabberStatus | read-only | mandatory | Jabber detection for port. If On(2), then jabber occurred on this port. Off(3), then no jabber occurred or jabber detection has been manually disabled. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.8 | ColumnePortStateJabberState | read-write | mandatory | Set can enable or disable jabber detection test. Get will say if jabber detection test is enabled (2) or disabled (3). |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.9 | ColumnePortStateAdminState | read-write | mandatory | Set will manually enable or disable any port. Get will say if port has been enabled (2) or disabled (3). |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.10 | ColumnePortStateRDTState | read-write | mandatory | Whether RecvThreshold has been enabled or disabled. Can use this to lower noise threshold (tolerance) so that longer twisted pair links can be used. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.11 | ColumnePortStatePolarityStatus | read-only | mandatory | Polarity is correct (2) or not for this port. |
| 1.3.6.1.4.1.298.1.3.4.1.1.1.12 | ColumnePortStatePolarityState | read-write | mandatory | Autopolarity correction enabled or disabled. Allows hub to make electrical corrections automatically if cable does not reverse polarity within wire pairs. If d… |
| 1.3.6.1.4.1.298.1.3.5 | NodeconcNodeMgt | |||
| 1.3.6.1.4.1.298.1.3.5.1 | TablenodeSummaryTable | not-accessible | mandatory | Node summary of all traffic through hub. |
| 1.3.6.1.4.1.298.1.3.5.1.1 | RownodeSummaryEntry | not-accessible | mandatory | Individual entry in node summary table. |
| 1.3.6.1.4.1.298.1.3.5.1.1.1 | ColumnnodeSummaryGrpIndex | read-only | mandatory | Group Id for identifying the group where node activity is detected. |
| 1.3.6.1.4.1.298.1.3.5.1.1.2 | ColumnnodeSummaryPortIndex | read-only | mandatory | Port Id for identifying the port where node activity is detected. |
| 1.3.6.1.4.1.298.1.3.5.1.1.3 | ColumnnodeSummarySrcMacAddr | read-only | mandatory | The source MAC address of the node that is transmitting frames received by this port. |
| 1.3.6.1.4.1.298.1.3.5.1.1.4 | ColumnnodeSummaryDestMacAddr | read-only | mandatory | The destination MAC address of the node to which frames are being received by this port. |
| 1.3.6.1.4.1.298.1.3.5.1.1.5 | ColumnnodeSummaryEtherType | read-only | mandatory | The 2 bytes after the source (src) address in packet. |
| 1.3.6.1.4.1.298.1.3.5.1.1.6 | ColumnnodeSummaryIpAddrPair | read-only | mandatory | Destination and source IP address if packet is an Ethernet IP packet. It the packet is not an Ethernet IP packet, then the information may not be accurate. |
| 1.3.6.1.4.1.298.1.3.5.1.1.7 | ColumnnodeSummaryTimeStamp | read-only | mandatory | nodeSummary entry time stamp (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.4.1.298.1.3.5.2 | NodenodeSecurity | |||
| 1.3.6.1.4.1.298.1.3.5.2.1 | TablenodeSecuLev1Table | not-accessible | mandatory | Table of nodes which have access to particular ports. Nodes are identified by MAC address. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1 | RownodeSecuLev1Entry | not-accessible | mandatory | Individual entry for node security table. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1.1 | ColumnnodeSecuLev1GrpIndex | read-only | mandatory | Group ID for port which verifying node access. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1.2 | ColumnnodeSecuLev1PortIndex | read-only | mandatory | Specific port for which verifying node access. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1.3 | ColumnnodeSecuLev1Status | read-write | mandatory | Address is valid or invalid. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1.4 | ColumnnodeSecuLev1AllowedAddr | read-write | mandatory | MAC address of nodes allowed for particular port. |
| 1.3.6.1.4.1.298.1.3.5.2.1.1.5 | ColumnnodeSecuLev1Action | read-write | mandatory | Set action for node intrusion violation. |
| 1.3.6.1.4.1.298.1.3.6 | NodeconcAlarmMgt | |||
| 1.3.6.1.4.1.298.1.3.6.1 | NodethresholdAlarm | |||
| 1.3.6.1.4.1.298.1.3.6.1.1 | TablethresholdLev1Table | not-accessible | optional | Threshold/trap table. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1 | RowthresholdLev1Entry | not-accessible | optional | Individual entry in threshold trap table. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.1 | ColumnthresholdLev1Index | read-only | optional | An index that uniquely identifies an entry in the alarm table. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.2 | ColumnthresholdLev1Status | read-write | optional | Status of entry in threshold/trap table. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.3 | ColumnthresholdLev1Target | read-write | optional | Set target for threshold definition. Either whole hub(2) or particular port (3). |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.4 | ColumnthresholdLev1GroupIndex | read-write | optional | Group ID for trap set. One note target is selected as hub, the group index will be ignored. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.5 | ColumnthresholdLev1PortIndex | read-write | optional | Port number for trap set. One note target is selected as hub, the port index will be ignored. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.6 | ColumnthresholdLev1Subject | read-write | optional | Variable checking for in trap. These are the type of frames that a trap will be verified against. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.7 | ColumnthresholdLev1SampleType | read-write | optional | The method of sampling the selected variable and calculating the value to be compared against the threshold. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.8 | ColumnthresholdLev1StartupAlarm | read-write | optional | When the trap is triggered in relation to value set. When goes above (2), below (3), or changes at all from (4). |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.9 | ColumnthresholdLev1WaterMark | read-write | optional | Counter of threshold. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.10 | ColumnthresholdLev1DetectedValue | read-only | optional | The value of the statistic for the last sampling period. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.11 | ColumnthresholdLev1RisingEvent | read-write | optional | How to respond to a triggered event for a rising event. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.12 | ColumnthresholdLev1FallingEvent | read-write | optional | How to respond to a triggered event for a falling event. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.13 | ColumnthresholdLev1Interval | read-write | optional | The interval in seconds over which the data is sampled. |
| 1.3.6.1.4.1.298.1.3.6.1.1.1.14 | ColumnthresholdLev1OwnerString | read-write | optional | 8-byte octet reserved for the owner who defined this entry. |
| 1.3.6.1.4.1.298.2 | NodeproductId | |||
| 1.3.6.1.4.1.298.2.1 | NodeadapterProductId | |||
| 1.3.6.1.4.1.298.2.2 | NodeconcProductId | |||
| 1.3.6.1.4.1.298.2.2.1 | Nodehub1012 | |||
| 1.3.6.1.4.1.298.2.2.1.1 | NodethresholdLev1 | The SNMP trap that is generated when an alarm entry crosses its rising threshold or falling threshold, and generates an event that is configured for sending SN… | ||
| 1.3.6.1.4.1.298.2.2.1.2 | NodenodeSecuLevel1 | The SNMP trap that is generated when the MAC layer address of the incoming frame from a particular port does not match the pre-assigned address with that port,… | ||
| 1.3.6.1.4.1.298.2.2.2 | Nodehub1012-bridge |