AT-FILEv2-MIB
66 objects
The AT File v2 MIB, for listing file contents of flash, nvs and sd-cards on local and stacked devices, and copying, moving and deleting files from local, stacked and remote sources.
Imported Objects
| AT-SMI-MIB | modules |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.600 | IdentityatFilev2 | The AT File v2 MIB, for listing file contents of flash, nvs and sd-cards on local and stacked devices, and copying, moving and deleting files from local, stack… | ||
| 1.3.6.1.4.1.207.8.4.4.4.600.1 | NodeatFilev2TableOptions | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.1.1 | ScalaratFilev2Recursive | read-write | obsolete | Set a value of '1' to enable recursive listing of directories in the atFilev2Table listing. NOTE: atFilev2Table and associated objects have been replaced by at… |
| 1.3.6.1.4.1.207.8.4.4.4.600.1.2 | ScalaratFilev2AllFiles | read-write | obsolete | Set a value of '1' to enable listing of all files (including hidden etc) in the atFilev2Table listing. NOTE: atFilev2Table and associated objects have been rep… |
| 1.3.6.1.4.1.207.8.4.4.4.600.1.3 | ScalaratFilev2Device | read-write | obsolete | Set a value that corresponds with the various devices listed below: 1. Flash (default) 2. Card 3. NVS Subsequent SNMP queries to the atFilev2Table will use thi… |
| 1.3.6.1.4.1.207.8.4.4.4.600.1.4 | ScalaratFilev2StackID | read-write | obsolete | Set an integer to correspond to the stack ID of a stack member. For devices that are not capable of being stacked, set with the value 1. For a chassis switch, … |
| 1.3.6.1.4.1.207.8.4.4.4.600.2 | TableatFilev2Table | not-accessible | obsolete | A list of files present on the device and stack-member specified by the atFilev2Device and atFilev2StackID objects. NOTE: atFilev2Table and associated objects … |
| 1.3.6.1.4.1.207.8.4.4.4.600.2.1 | RowatFilev2Entry | not-accessible | obsolete | An entry in the list of files containing information about a single file. NOTE: atFilev2Table and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.2.1.1 | ColumnatFilev2Filename | read-only | obsolete | The name of the file. Files are sorted in alphabetical order. Directory names end with / and have a 'd' present in the atFilev2FileAttribs object. The filename… |
| 1.3.6.1.4.1.207.8.4.4.4.600.2.1.2 | ColumnatFilev2FileSize | read-only | obsolete | The size of the file in bytes. NOTE: atFilev2Table and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.2.1.3 | ColumnatFilev2FileCreationTime | read-only | obsolete | File creation time in the form <MMM DD YYYY HH:MM:SS>. Eg: Sep 7 2008 06:07:54. NOTE: atFilev2Table and associated objects have been replaced by atFilev2FileVi… |
| 1.3.6.1.4.1.207.8.4.4.4.600.2.1.4 | ColumnatFilev2FileAttribs | read-only | obsolete | The standard file accessibility attributes in the form <drwx>. d - directory r - readable w - writeable x - executable If a file does not have a particular att… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3 | NodeatFilev2FileOperation | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.1 | ScalaratFilev2SourceStackID | read-write | current | Set to the stack ID of the source device to be used for the file operation. For devices that are not capable of being stacked, set with the value 1. For a chas… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.2 | ScalaratFilev2SourceDevice | read-write | current | Set to the value representing the source file system to be used for the file operation: 1. Flash 2. Card 3. NVS 4. TFTP 5. USB For copying files, any combinati… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.3 | ScalaratFilev2SourceFilename | read-write | current | The filename of the source file to be copied, moved or deleted. Include any path as required, but the file system type is not necessary. For example, to copy t… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.4 | ScalaratFilev2DestinationStackID | read-write | current | Set to the stack ID of the destination device to be used for the file operation. For devices that are not capable of being stacked, set with the value 1. For a… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.5 | ScalaratFilev2DestinationDevice | read-write | current | Set to the value representing the destination file system to be used for the file operation: 1. Flash 2. Card 3. NVS 4. TFTP 5. USB For copying files, any comb… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.6 | ScalaratFilev2DestinationFilename | read-write | current | The destination filename for the copy or move operation. Include any path as required, but the file system type is not necessary. The destination filename does… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.7 | ScalaratFilev2CopyBegin | read-write | current | A read on this object can return several possible values, depending on the current status of the system and the various file operation objects: idle There is n… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.8 | ScalaratFilev2MoveBegin | read-write | current | A read on this object can return several possible values, depending on the current status of the system and the various file operation objects: idle There is n… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.9 | ScalaratFilev2DeleteBegin | read-write | current | A read on this object can return several possible values, depending on the current status of the system and the various file operation objects: idle There is n… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.10 | NodeatFilev2Flash1 | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.11 | NodeatFilev2Card2 | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.12 | NodeatFilev2Nvs3 | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.13 | NodeatFilev2Tftp4 | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.13.1 | ScalaratFilev2TftpIPAddr | read-write | current | The IP address of the TFTP server that is to be used for the file copy process. This IP address needs to be reachable from the device or the file copy will fai… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14 | NodeatFilev2DirOperation | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.1 | ScalaratFilev2DirStackID | read-write | current | Set to the stack ID of the device containing the directory to be renamed or deleted, or to the stack ID of the device on which to create a new directory. For d… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.2 | ScalaratFilev2DirFileSystem | read-write | current | Set to the value representing the file system on which the existing directory resides, or on which a new directory should be created: 1. Flash 2. Card 3. NVS 5… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.3 | ScalaratFilev2DirPath | read-write | current | This object should be set to the path of the directory to be created/deleted/renamed, but should not include the name of the directory itself, or the file syst… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.4 | ScalaratFilev2SourceDirName | read-write | current | This object is required for directory deletion or rename operations only. It should be set to the name of the directory to be deleted/renamed, but should not i… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.5 | ScalaratFilev2DestDirName | read-write | current | This object is required for directory creation or rename operations only. It should be set to the name of the directory to be created, or the destination direc… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.6 | ScalaratFilev2BeginDirOperation | read-write | current | A read of this object will always return 'idle' (1). All applicable objects above must have been set correctly in order to commence an operation. The following… |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.14.7 | ScalaratFilev2LastDirOpResult | read-only | current | Gives an indication of the result of the last completed SNMP directory operation. |
| 1.3.6.1.4.1.207.8.4.4.4.600.3.15 | NodeatFilev2Usb5 | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.4 | TableatFilev2SDcardTable | not-accessible | current | A table of information about SD cards. |
| 1.3.6.1.4.1.207.8.4.4.4.600.4.1 | RowatFilev2SDcardEntry | not-accessible | current | Data pertaining to an SD card instance. |
| 1.3.6.1.4.1.207.8.4.4.4.600.4.1.1 | ColumnatFilev2SDcardStackMemberId | read-only | current | The index of the stack member hosting this SD card. For devices that are not capable of being stacked, this object will always return the value 1. |
| 1.3.6.1.4.1.207.8.4.4.4.600.4.1.2 | ColumnatFilev2SDcardPresence | read-only | current | This object indicates whether or not an SD card is inserted in a slot. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5 | TableatFilev2InfoTable | not-accessible | obsolete | A list of all files, including pathnames, that are present on the device. Hidden system files are not displayed. NOTE: atFilev2InfoTable and associated objects… |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1 | RowatFilev2InfoEntry | not-accessible | obsolete | An entry in the list of files, containing information about a single file. NOTE: atFilev2Table and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.1 | ColumnatFilev2InfoFilepath | read-only | obsolete | The full path and name of the file. Files are sorted in alphabetical order, and any filepath that is longer than 112 characters will not be displayed due to SN… |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.2 | ColumnatFilev2InfoFileSize | read-only | obsolete | The size of the file in bytes. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.3 | ColumnatFilev2InfoFileCreationTime | read-only | obsolete | File creation time in the form <MMM DD YYYY HH:MM:SS>. Eg: Sep 7 2008 06:07:54. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2Fi… |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.4 | ColumnatFilev2InfoFileIsDirectory | read-only | obsolete | Returns TRUE if the entry is a directory, FALSE otherwise. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.5 | ColumnatFilev2InfoFileIsReadable | read-only | obsolete | Returns TRUE if the file is readable, FALSE otherwise. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.6 | ColumnatFilev2InfoFileIsWriteable | read-only | obsolete | Returns TRUE if the file is writeable, FALSE otherwise. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.5.1.7 | ColumnatFilev2InfoFileIsExecutable | read-only | obsolete | Returns TRUE if the file is executable, FALSE otherwise. NOTE: atFilev2InfoTable and associated objects have been replaced by atFilev2FileViewer. |
| 1.3.6.1.4.1.207.8.4.4.4.600.6 | TableatFilev2USBMediaTable | not-accessible | current | A table of information about USB media. |
| 1.3.6.1.4.1.207.8.4.4.4.600.6.1 | RowatFilev2USBMediaEntry | not-accessible | current | Data pertaining to an USB media instance. |
| 1.3.6.1.4.1.207.8.4.4.4.600.6.1.1 | ColumnatFilev2USBMediaStackMemberId | read-only | current | The index of the stack member hosting this USB media. For devices that are not capable of being stacked, this object will always return the value 1. For a chas… |
| 1.3.6.1.4.1.207.8.4.4.4.600.6.1.2 | ColumnatFilev2USBMediaPresence | read-only | current | This object indicates whether or not an USB media is inserted in a slot. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7 | NodeatFilev2FileViewer | |||
| 1.3.6.1.4.1.207.8.4.4.4.600.7.1 | ScalaratFilev2FileViewerStackId | read-write | current | The stack ID of the stack member for which files will be displayed in the FileViewer table. For devices that are not capable of being stacked, this variable wi… |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.2 | ScalaratFilev2FileViewerDevice | read-write | current | The file system device for which files will be displayed in the FileViewer table. The values supported for this variable are identical to the values for other … |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.3 | ScalaratFilev2FileViewerCurrentPath | read-write | current | The file system path for which files will be displayed in the FileViewer table. This path will always read as a full pathname starting with the '/' character. … |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4 | TableatFilev2FileViewerTable | not-accessible | current | A list of all files, not including pathnames, that are present on the device specified by atFilev2FileViewerStackId and atFilev2FileViewerDevice, in the path s… |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1 | RowatFilev2FileViewerEntry | not-accessible | current | An entry in the list of files, containing information about a single file. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.1 | ColumnatFilev2FileViewerName | read-only | current | The name of the file. Files are sorted in alphabetical order, and any name that is longer than 112 characters will not be displayed due to SNMP OID length limi… |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.2 | ColumnatFilev2FileViewerSize | read-only | current | The size of the file in bytes. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.3 | ColumnatFilev2FileViewerCreationTime | read-only | current | File creation time in the form <MMM DD YYYY HH:MM:SS>. Eg: Sep 7 2008 06:07:54. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.4 | ColumnatFilev2FileViewerIsDirectory | read-only | current | Returns TRUE if the entry is a directory, FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.5 | ColumnatFilev2FileViewerIsReadable | read-only | current | Returns TRUE if the file is readable, FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.6 | ColumnatFilev2FileViewerIsWriteable | read-only | current | Returns TRUE if the file is writeable, FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.600.7.4.1.7 | ColumnatFilev2FileViewerIsExecutable | read-only | current | Returns TRUE if the file is executable, FALSE otherwise. |