AT-ISDN-MIB
85 objects
This MIB file contains definitions of managed objects for the CC module.
Imported Objects
| AT-SMI-MIB | DisplayStringUnsized modules |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.37 | Identitycc | This MIB file contains definitions of managed objects for the CC module. | ||
| 1.3.6.1.4.1.207.8.4.4.4.37.1 | TableccDetailsTable | not-accessible | current | The table of call details parameters. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1 | RowccDetailsEntry | not-accessible | current | A single entry of ISDN call details. This contains the parameters of a single ISDN call details. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.1 | ColumnccDetailsIndex | read-only | current | The index of the call details entry in the call details table. When an entry is created in this table, the index does not have to be written. However, to refer… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.2 | ColumnccDetailsName | read-write | current | The name of the ISDN call details. This must be unique for all ISDN call details, when comparisons are done ignoring the case of letters. Valid characters in t… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.3 | ColumnccDetailsRemoteName | read-write | current | The remote ISDN call name. This name can be referenced by certain other call details parameters related with setting up the Q.931 SETUP message for outgoing ca… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.4 | ColumnccDetailsCalledNumber | read-write | current | The number called when this call details is activated. The number should include all telephone network access codes, country codes and area codes required to m… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.5 | ColumnccDetailsCallingNumber | read-write | current | The number used as the calling number when this call is activated. The calling number can optionally be placed in the outgoing SETUP message. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.6 | ColumnccDetailsAlternateNumber | read-write | current | The number called when all retries with the main called number have failed. In this event, the router tries once with the alternate number, then checks the ccD… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.7 | ColumnccDetailsEnabled | read-write | current | Whether this ISDN call is enabled or disabled for incoming and outgoing calls. If the call details entry is disabled, all existing active calls based on this c… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.8 | ColumnccDetailsDirection | read-write | current | The direction for which calls may be made or received using this call details entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.9 | ColumnccDetailsPrecedence | read-write | current | The precedence of this call details entry in the event of call collision. Call collision occurs when an incoming call for a given details entry is detected whi… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.10 | ColumnccDetailsHoldupTime | read-write | current | The time, in seconds, that active calls created from this call details should be held up after initial activation. The call will be held up for at least this t… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.11 | ColumnccDetailsPreferredIfIndex | read-write | current | The ifIndex of an ISDN interface on this router which is the preferred ISDN interface on which to make an outgoing call using this call details entry. The ifIn… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.12 | ColumnccDetailsRequiredIfIndex | read-write | current | The ifIndex of an ISDN interface on this router which is the required ISDN interface on which to make an outgoing call using this call details entry. The ifInd… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.13 | ColumnccDetailsPriority | read-write | current | The priority of calls generated from this call details entry. The priority determines whether calls can be bumped for higher priority calls. The value of prior… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.14 | ColumnccDetailsRetryT1 | read-write | current | The time in seconds between retries of calls generated from this call details entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.15 | ColumnccDetailsRetryN1 | read-write | current | The number of retries in a retry group for calls generated from this call details entry. Note that the default value means that by default the call will not be… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.16 | ColumnccDetailsRetryT2 | read-write | current | The time in seconds between retry groups for retries of calls generated from this call details entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.17 | ColumnccDetailsRetryN2 | read-write | current | The number of retry groups for calls generated from this call details entry. Note that the default value means that by default no retry groups will be attempte… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.18 | ColumnccDetailsKeepup | read-write | current | A flag indicating whether calls generated from this call details entry should be kept up always. Inspection of this flag takes place when a call is cleared fro… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.19 | ColumnccDetailsOutSetupCli | read-write | current | The CLI information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no CLI informat… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.20 | ColumnccDetailsOutSetupUser | read-write | current | The user-user information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no user-u… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.21 | ColumnccDetailsOutSetupCalledSub | read-write | current | The called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that n… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.22 | ColumnccDetailsOutSubaddress | read-write | current | This object gives a way to override the called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoin… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.23 | ColumnccDetailsCallback | read-write | current | A flag indicating whether or not to call back the caller when an incoming call is generated from this call details entry. If set to 'yes', the incoming call wi… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.24 | ColumnccDetailsCallbackDelay | read-write | current | The time, in tenths of a second, which the router will wait after clearing an incoming call whose call details entry specified that the caller should be called… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.25 | ColumnccDetailsInSetupCalledSubSearch | read-write | current | Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the called subaddress information … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.26 | ColumnccDetailsInSetupUserSearch | read-write | current | Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the user-user information in the i… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.27 | ColumnccDetailsInSetupCliSearch | read-write | current | Determines whether this call details entry is used in a search of call details for an incoming call based on the contents of the calling number information in … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.28 | ColumnccDetailsInSetupCliSearchList | read-write | current | If the ccDetailsInSetupCliSearch object is set to 'list', this object gives the index of the CLI list to search. The value of CLI list indices is 1..100. The v… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.29 | ColumnccDetailsInAnyFlag | read-write | current | Determines whether this call details entry will match any incoming call. After all searched for incoming calls have been carried out based on called subaddress… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.30 | ColumnccDetailsInSetupCalledSubCheck | read-write | current | Determines whether to perform a check when an incoming call matches this call details entry based on the contents of the called subaddress information in the i… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.31 | ColumnccDetailsInSetupUserCheck | read-write | current | Determines whether to perform a check when an incoming call matches this call details entry based on the contents of the user-user information in the incoming … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.32 | ColumnccDetailsInSetupCliCheck | read-write | current | Determines whether to perform a check and which check to perform when an incoming call matches this call details entry based on the contents of the calling num… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.33 | ColumnccDetailsInSetupCliCheckList | read-write | current | If the ccDetailsInSetupCliCheck object is set to 'present' or 'required', this object gives the index of the CLI list to check against. The value of CLI list i… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.34 | ColumnccDetailsUserType | read-write | current | The type of user of this call. The value 'attach' means that users have to attach to this call before the call can be used for outgoing or incoming calls. The … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.35 | ColumnccDetailsLoginType | read-write | current | The type of login for calls generated using this call details entry, for incoming calls only. Incoming calls can be configured to go through a logging in phase… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.36 | ColumnccDetailsUsername | read-write | current | The source of the username when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no username is defin… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.37 | ColumnccDetailsPassword | read-write | current | The source of the password when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no password is defin… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.38 | ColumnccDetailsBumpDelay | read-write | current | The time, in tenths of a second, which the router will wait after clearing an existing call which has been bumped to make way for a call based on this call det… |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.39 | ColumnccDetailsDataRate | read-write | current | The data rate to use for active calls based on this call details entry. The actual data rate for outgoing calls is determined by both this object and the data … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.40 | ColumnccDetailsPppTemplate | read-write | current | The PPP template to use when creating dynamic PPP interfaces for calls generated from this call details entry. The value 33 represents a default PPP template, … |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.41 | ColumnccDetailsUserModule | read-only | current | The module ID of the user module currently attached to this ISDN call details entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.1.1.42 | ColumnccDetailsNumberAttachments | read-only | current | The number of attachments from the user module currently attached to this call details entry. The ccAttachmentsTable gives the actual attachments for each call… |
| 1.3.6.1.4.1.207.8.4.4.4.37.2 | TableccCliListTable | not-accessible | current | The table of CLI list entries. |
| 1.3.6.1.4.1.207.8.4.4.4.37.2.1 | RowccCliListEntry | not-accessible | current | A single entry in the CLI list table. This contains a single number, as well as index information. |
| 1.3.6.1.4.1.207.8.4.4.4.37.2.1.1 | ColumnccCliListListIndex | read-only | current | The index of the CLI list. CLI lists from 1 to 100 are defined in the router. |
| 1.3.6.1.4.1.207.8.4.4.4.37.2.1.2 | ColumnccCliListEntryIndex | read-only | current | The index of the CLI list entry within the CLI list. The minimum CLI list entry is 1. CLI lists are unlimited in length, although internal memory requirements … |
| 1.3.6.1.4.1.207.8.4.4.4.37.2.1.3 | ColumnccCliListNumber | read-write | current | The number for this CLI list entry. Setting the number to a zero length string removes the entry from the CLI list, with consequent reshuffling of CLI entry in… |
| 1.3.6.1.4.1.207.8.4.4.4.37.3 | TableccActiveCallTable | not-accessible | current | The table of ISDN active calls. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1 | RowccActiveCallEntry | not-accessible | current | A single entry in the active call table. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.1 | ColumnccActiveCallIndex | read-only | current | The index of the active call. There are 128 possible active calls in the router simultaneously. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.2 | ColumnccActiveCallDetailsIndex | read-only | current | The index of the call details entry which generated this active call. Thus the index into the ccDetailsTable for this call. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.3 | ColumnccActiveCallIfIndex | read-only | current | The interface index of the interface on which this active call is being made or received. A value of zero indicates that the active has not yet had an interfac… |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.4 | ColumnccActiveCallDataRate | read-only | current | The data rate in use for this active call. This is determined by the call details setting of data rate, the ISDN interface setting for data rate, and the conte… |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.5 | ColumnccActiveCallState | read-only | current | The state of this active call. The value 'null' indicates that this active call does not actually exist, in other words it is in the process of being created o… |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.6 | ColumnccActiveCallDirection | read-only | current | The direction of this active call. The value 'in' indicates that this active call is an incoming call, the value 'out' indicates that the active call is an out… |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.7 | ColumnccActiveCallUserModule | read-only | current | The module ID of the user module attached to this ISDN active call. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.8 | ColumnccActiveCallUserInstance | read-only | current | The instance of the user module attached to this ISDN active call. |
| 1.3.6.1.4.1.207.8.4.4.4.37.3.1.9 | ColumnccActiveCallBchannelIndex | read-only | current | The B channel number for this active entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a ch… |
| 1.3.6.1.4.1.207.8.4.4.4.37.4 | TableccCallLogTable | not-accessible | current | The table of ISDN call log entries. |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1 | RowccCallLogEntry | not-accessible | current | A single entry in the ISDN call log table. |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.1 | ColumnccCallLogIndex | read-only | current | The index of the call log entry. Since the call log table is dynamic, there is no guarantee that this index will continue to refer to the same log entry over t… |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.2 | ColumnccCallLogName | read-only | current | The name of the call details entry which generated the active call for which this is the log entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.3 | ColumnccCallLogState | read-only | current | The state of the log entry. The value 'initial' means that the call is being established. The value 'active' means that the call is currently established. The … |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.4 | ColumnccCallLogTimeStarted | read-only | current | A string in the format 'dd-mmm-yyyy hh:mm:ss' which gives the start time of the call for which this is the log entry. If the call never reached or has not yet … |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.5 | ColumnccCallLogDirection | read-only | current | The direction of the call for which this is the log entry. |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.6 | ColumnccCallLogDuration | read-only | current | The duration in seconds, of the call for which this is the log entry. A value of 0 in this field means either that the call has just started, that the call was… |
| 1.3.6.1.4.1.207.8.4.4.4.37.4.1.7 | ColumnccCallLogRemoteNumber | read-only | current | For incoming calls, the calling number, if this was made available in the SETUP message. For outgoing calls, the number dialed. If the number was not available… |
| 1.3.6.1.4.1.207.8.4.4.4.37.5 | TableccAttachmentTable | not-accessible | current | The table of call detail attachment entries. |
| 1.3.6.1.4.1.207.8.4.4.4.37.5.1 | RowccAttachmentEntry | not-accessible | current | A single entry in the attachment table. |
| 1.3.6.1.4.1.207.8.4.4.4.37.5.1.1 | ColumnccAttachmentDetailsIndex | read-only | current | The index of the call details entry to which this attachment entry belongs. |
| 1.3.6.1.4.1.207.8.4.4.4.37.5.1.2 | ColumnccAttachmentEntryIndex | read-only | current | The index of the attachment entry within the attachment list. |
| 1.3.6.1.4.1.207.8.4.4.4.37.5.1.3 | ColumnccAttachmentActiveCallIndex | read-only | current | The index of the active call for this attachment. A value of 0 indicates that there is currently no active call for this attachment. A value of 1 to 128 refere… |
| 1.3.6.1.4.1.207.8.4.4.4.37.5.1.4 | ColumnccAttachmentUserInstance | read-only | current | The instance of the user module attached to the ISDN active call for this attachment. This object should return the same value as the object ccActiveCallUserIn… |
| 1.3.6.1.4.1.207.8.4.4.4.37.6 | TableccBchannelTable | not-accessible | current | The table of B channel attachment entries. |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1 | RowccBchannelEntry | not-accessible | current | A single entry in the B channel attachment table. |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.1 | ColumnccBchannelIfIndex | read-only | current | The interface index of the interface which this B channel entry is on. The ifEntry indexed by this object is the ifEntry for the entire ISDN interface, not the… |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.2 | ColumnccBchannelChannelIndex | read-only | current | The B channel number for this B channel entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a… |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.3 | ColumnccBchannelAllocated | read-only | current | A flag indicating whether this B channel is actually allocated to a call or not. |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.4 | ColumnccBchannelCallType | read-only | current | The type of call on this B channel. If the B channel is not allocated, the call type will be undefined. |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.5 | ColumnccBchannelActiveCallIndex | read-only | current | The index of the active call which is currently attached to this B channel. If the value of this object is 0 the channel is either not allocated, or is not all… |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.6 | ColumnccBchannelPriority | read-only | current | The priority of the call which has this B channel allocated to it. This is in the range 0..99 for data calls, 150 for voice calls and 200 for emergency voice c… |
| 1.3.6.1.4.1.207.8.4.4.4.37.6.1.7 | ColumnccBchannelDirection | read-only | current | The direction of the call which has this B channel allocated to it. If this B channel is not allocated the value will be 'unallocated'. |