AT-LINKMON-MIB
47 objects
The AT Link Monitoring MIB for reporting probe configuration, probe metrics, historical metric configuration and collection.
Imported Objects
| AT-SMI-MIB | DisplayStringUnsized modules |
| INET-ADDRESS-MIB | InetVersion |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.606 | IdentityatLinkMon | The AT Link Monitoring MIB for reporting probe configuration, probe metrics, historical metric configuration and collection. | ||
| 1.3.6.1.4.1.207.8.4.4.4.606.1 | TableatLinkMonProbeTable | not-accessible | current | A table of information describing the configured Link Monitoring probes. Upon device reboot, probe OID's will be re-assigned based on the alphabetical naming o… |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1 | RowatLinkMonProbeEntry | not-accessible | current | The configuration of a specific probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.1 | ColumnatLinkMonProbeID | not-accessible | current | ID of the probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.2 | ColumnatLinkMonProbeName | read-only | current | Name of the probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.3 | ColumnatLinkMonProbeType | read-only | current | Type of probe, ICMP PING or HTTP GET. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.4 | ColumnatLinkMonProbeIPVersion | read-only | current | IP version of the probe, IPv4 or IPv6. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.5 | ColumnatLinkMonProbeDestination | read-only | current | The destination of the probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.6 | ColumnatLinkMonProbeEgressIf | read-only | current | The interface that the probe packets should egress. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.7 | ColumnatLinkmonProbeEgreesIfValid | read-only | current | Indicates if the interface that the probe packets egress is valid. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.8 | ColumnatLinkMonProbeSource | read-only | current | The source IP address or interface. Only applicable for ICMP Probes. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.9 | ColumnatLinkMonProbeSourceValid | read-only | current | Indicates if the source IP address or interface is valid. Only applicable for ICMP Probes. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.10 | ColumnatLinkMonProbeDSCP | read-only | current | The DSCP value to use when sending the packet. Only applicable for ICMP Probes. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.11 | ColumnatLinkMonProbePacketSize | read-only | current | The size of a probe packet. Only applicable for ICMP Probes. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.12 | ColumnatLinkMonProbeInterval | read-only | current | The number of milliseconds between sending out each probe. Range for an ICMP Ping probe is 100-10000. Range for an HTTP Get probe is 30000-3600000. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.13 | ColumnatLinkMonProbeSampleSize | read-only | current | The number of probe results to use when calculating the latency and jitter metrics. Only applicable for ICMP Probes. |
| 1.3.6.1.4.1.207.8.4.4.4.606.1.1.14 | ColumnatLinkMonProbeEnabled | read-only | current | Whether the probe is enabled or disabled. If it is enabled, then the device will attempt to send probes if the link is up. If it is disabled, then no probes wi… |
| 1.3.6.1.4.1.207.8.4.4.4.606.2 | TableatLinkMonProbeDetailTable | not-accessible | current | A table of information describing the latest Link Monitoring probe details. Upon device reboot, probe OID's will be re-assigned based on the alphabetical namin… |
| 1.3.6.1.4.1.207.8.4.4.4.606.2.1 | RowatLinkMonProbeDetailEntry | not-accessible | current | The latest detail of a specific probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.2.1.1 | ColumnatLinkMonProbeDetailProbesSent | read-only | current | The number of probes that have been sent. |
| 1.3.6.1.4.1.207.8.4.4.4.606.2.1.2 | ColumnatLinkMonProbeDetailLastTxTime | read-only | current | The time that the last probe was sent. |
| 1.3.6.1.4.1.207.8.4.4.4.606.2.1.3 | ColumnatLinkMonProbeDetailLastRxTime | read-only | current | The time that the device last successfully received a probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.3 | TableatLinkMonProbeLatestMetricsTable | not-accessible | current | A table of information describing the latest Link Monitoring probe metrics. Upon device reboot, probe OID's will be re-assigned based on the alphabetical namin… |
| 1.3.6.1.4.1.207.8.4.4.4.606.3.1 | RowatLinkMonProbeLatestMetricsEntry | not-accessible | current | The latest metrics of a specific probe. |
| 1.3.6.1.4.1.207.8.4.4.4.606.3.1.1 | ColumnatLinkMonProbeLatestMetricsLatency | read-only | current | The average latency based on the last samples in ms. |
| 1.3.6.1.4.1.207.8.4.4.4.606.3.1.2 | ColumnatLinkMonProbeLatestMetricsJitter | read-only | current | The average jitter based on the last samples in ms. |
| 1.3.6.1.4.1.207.8.4.4.4.606.3.1.3 | ColumnatLinkMonProbeLatestMetricsPktLoss | read-only | current | The percentage of probes lost based on the last 100 probes. The value is given in tenth's of a percent. |
| 1.3.6.1.4.1.207.8.4.4.4.606.3.1.4 | ColumnatLinkMonProbeLatestMetricsCnscPktLoss | read-only | current | The number of consecutive probes that have been lost. A positive value means consecutive packet lost. A negative value means consecutive packets received. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4 | TableatLinkMonProbeHistoryTable | not-accessible | current | A table of information describing historical Link Monitoring probe metrics. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1 | RowatLinkMonProbeHistoryEntry | not-accessible | current | The information for a specific collection of historical probe metrics. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.1 | ColumnatLinkMonProbeHistoryID | read-only | current | The ID of the Probe History collection |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.2 | ColumnatLinkMonProbeHistoryProbeName | read-only | current | The name of the probe the metrics are sampled from. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.3 | ColumnatLinkMonProbeHistoryInterval | read-only | current | The interval at which the metric data is sampled |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.4 | ColumnatLinkMonProbeHistoryBuckets | read-only | current | The maximum number of historical samples that are kept. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.5 | ColumnatLinkMonProbeHistoryLastSmplID | read-only | current | The ID of the latest sample recorded. This is always increasing to distinguish new samples. |
| 1.3.6.1.4.1.207.8.4.4.4.606.4.1.6 | ColumnatLinkMonProbeHistoryLastSmplTime | read-only | current | The timestamp of the last sample. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5 | TableatLinkMonSampleTable | not-accessible | current | A table of information describing the Link Monitoring metrics of a historical probe sample. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1 | RowatLinkMonSampleEntry | not-accessible | current | A specific historical probe sample. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.1 | ColumnatLinkMonSampleBucket | not-accessible | current | The bucket to read the sample data from. The first bucket has the oldest available sample. A bucket can have no data in it if less samples have been taken then… |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.2 | ColumnatLinkMonSampleLatencySum | read-only | current | Sum of latency metric values calculated during the sample interval. Divide by the latency count for an average latency during the interval. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.3 | ColumnatLinkMonSampleLatencyCount | read-only | current | The number of latency metric values calculated in the sum. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.4 | ColumnatLinkMonSampleJitterSum | read-only | current | Sum of jitter metric values calculated during the sample interval. Divide by the jitter count for an average jitter during the interval. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.5 | ColumnatLinkMonSampleJitterCount | read-only | current | Number of jitter metric values calculated in the sum. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.6 | ColumnatLinkMonSamplePktLossSum | read-only | current | Sum of the packet loss metric values recorded during the sample interval. The value is given in tenth's of a percent. Divide by packets transmitted for the ave… |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.7 | ColumnatLinkMonSamplePktsTx | read-only | current | Number of probes sent during the sample interval. |
| 1.3.6.1.4.1.207.8.4.4.4.606.5.1.8 | ColumnatLinkMonSamplePktsRx | read-only | current | Number of probes sent that received a reply during the sample interval. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtLinkMonType | INTEGER { icmp(1), http(2) } | current | Indicates the type of the probe. |