AT-PTP-MIB
196 objects
This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module.
Imported Objects
| AT-SMI-MIB | modules |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.504 | IdentityatPtpMIB | This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module. | ||
| 1.3.6.1.4.1.207.8.4.4.4.504.0 | NodeptpMIBNotifs | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1 | NodeptpMIBObjects | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1 | NodeptpMIBSystemInfo | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.1 | TableptpSystemTable | not-accessible | current | Table of count information about the PTP system for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1 | RowptpSystemEntry | not-accessible | current | An entry in the table, containing count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while th… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.1 | ColumnptpDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchroni… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.2 | ColumnptpInstanceIndex | not-accessible | current | This object specifies the instance of the Clock for this domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.3 | ColumnptpDomainClockPortsTotal | read-only | current | This object specifies the total number of clock ports configured within a domain in the system. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.2 | TableptpSystemDomainTable | not-accessible | current | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1 | RowptpSystemDomainEntry | not-accessible | current | An entry in the table, containing information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1.1 | ColumnptpSystemDomainClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1.2 | ColumnptpSystemDomainTotals | read-only | current | This object specifies the total number of PTP domains for this particular clock type configured in this node. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.1.3 | ScalarptpSystemProfile | read-only | current | This object specifies the PTP Profile implemented on the system. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2 | NodeptpMIBClockInfo | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1 | TableptpClockCurrentDSTable | not-accessible | current | Table of information about the PTP clock Current Datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1 | RowptpClockCurrentDSEntry | not-accessible | current | An entry in the table, containing information about a single PTP clock Current Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.1 | ColumnptpClockCurrentDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.2 | ColumnptpClockCurrentDSClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.3 | ColumnptpClockCurrentDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.4 | ColumnptpClockCurrentDSStepsRemoved | read-only | current | The current clock dataset StepsRemoved value. This object specifies the distance measured by the number of Boundary clocks between the local clock and the Fore… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.5 | ColumnptpClockCurrentDSOffsetFromMaster | read-only | current | This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.6 | ColumnptpClockCurrentDSMeanPathDelay | read-only | current | This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mech… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2 | TableptpClockParentDSTable | not-accessible | current | Table of information about the PTP clock Parent Datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1 | RowptpClockParentDSEntry | not-accessible | current | An entry in the table, containing information about a single PTP clock Parent Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.1 | ColumnptpClockParentDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.2 | ColumnptpClockParentDSClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.3 | ColumnptpClockParentDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.4 | ColumnptpClockParentDSParentPortIdentity | read-only | current | This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.5 | ColumnptpClockParentDSParentStats | read-only | current | This object specifies the Parent Dataset ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measu… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.6 | ColumnptpClockParentDSOffset | read-only | current | This object specifies the Parent Dataset ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local c… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.7 | ColumnptpClockParentDSClockPhChRate | read-only | current | This object specifies the clock's parent dataset ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measure… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.8 | ColumnptpClockParentDSGMClockIdentity | read-only | current | This object specifies the parent dataset Grandmaster clock identity. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.9 | ColumnptpClockParentDSGMClockPriority1 | read-only | current | This object specifies the parent dataset Grandmaster clock priority1. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.10 | ColumnptpClockParentDSGMClockPriority2 | read-only | current | This object specifies the parent dataset grandmaster clock priority2. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.11 | ColumnptpClockParentDSGMClockQualityClass | read-only | current | This object specifies the parent dataset grandmaster clock quality class. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.12 | ColumnptpClockParentDSGMClockQualityAccuracy | read-only | current | This object specifies the parent dataset grandmaster clock quality accuracy. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.13 | ColumnptpClockParentDSGMClockQualityOffset | read-only | current | This object specifies the parent dataset grandmaster clock quality offset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3 | TableptpClockDefaultDSTable | not-accessible | current | Table of information about the PTP clock Default Datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1 | RowptpClockDefaultDSEntry | not-accessible | current | An entry in the table, containing information about a single PTP clock Default Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.1 | ColumnptpClockDefaultDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.2 | ColumnptpClockDefaultDSClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.3 | ColumnptpClockDefaultDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.4 | ColumnptpClockDefaultDSTwoStepFlag | read-only | current | This object specifies whether the Two Step process is used. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.5 | ColumnptpClockDefaultDSClockIdentity | read-only | current | This object specifies the default Datasets clock identity. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.6 | ColumnptpClockDefaultDSPriority1 | read-only | current | This object specifies the default Datasets clock Priority1. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.7 | ColumnptpClockDefaultDSPriority2 | read-only | current | This object specifies the default Datasets clock Priority2. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.8 | ColumnptpClockDefaultDSSlaveOnly | read-only | current | Whether the SlaveOnly flag is set. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.9 | ColumnptpClockDefaultDSQualityClass | read-only | current | This object specifies the default dataset Quality Class. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.10 | ColumnptpClockDefaultDSQualityAccuracy | read-only | current | This object specifies the default dataset Quality Accuracy. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.11 | ColumnptpClockDefaultDSQualityOffset | read-only | current | This object specifies the default dataset Quality offset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4 | TableptpClockRunningTable | not-accessible | current | Table of information about the PTP clock Running Datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1 | RowptpClockRunningEntry | not-accessible | current | An entry in the table, containing information about a single PTP clock running Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.1 | ColumnptpClockRunningDomainIndex | not-accessible | current | This object specifies the domain number used to create a Logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.2 | ColumnptpClockRunningClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.3 | ColumnptpClockRunningInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.4 | ColumnptpClockRunningState | read-only | current | This object specifies the Clock state returned by a PTP engine which was described earlier. Freerun state. Applies to a slave device that is not locked to a ma… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.5 | ColumnptpClockRunningPacketsSent | read-only | current | This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.6 | ColumnptpClockRunningPacketsReceived | read-only | current | This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5 | TableptpClockTimePropertiesDSTable | not-accessible | current | Table of information about the PTP clock time properties datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1 | RowptpClockTimePropertiesDSEntry | not-accessible | current | An entry in the table, containing information about a single PTP clock timeproperties Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.1 | ColumnptpClockTimePropertiesDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.2 | ColumnptpClockTimePropertiesDSClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.3 | ColumnptpClockTimePropertiesDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.4 | ColumnptpClockTimePropertiesDSCurrentUTCOffsetValid | read-only | current | This object specifies the timeproperties dataset value of whether the current UTC offset is valid. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.5 | ColumnptpClockTimePropertiesDSCurrentUTCOffset | read-only | current | This object specifies the timeproperties dataset value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.cu… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.6 | ColumnptpClockTimePropertiesDSLeap59 | read-only | current | This object specifies the Leap59 value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.7 | ColumnptpClockTimePropertiesDSLeap61 | read-only | current | This object specifies the Leap61 value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.8 | ColumnptpClockTimePropertiesDSTimeTraceable | read-only | current | This object specifies the Time Traceable value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.9 | ColumnptpClockTimePropertiesDSFreqTraceable | read-only | current | This object specifies the Frequency Traceable value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.10 | ColumnptpClockTimePropertiesDSPTPTimescale | read-only | current | This object specifies the PTP Timescale value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.11 | ColumnptpClockTimePropertiesDSSource | read-only | current | This object specifies the Timesource value in the clock Current Dataset. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6 | TableptpClockTransDefaultDSTable | not-accessible | current | Table of information about the PTP Transparent clock Default Datasets for all domains. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1 | RowptpClockTransDefaultDSEntry | not-accessible | current | An entry in the table, containing information about a single PTP Transparent clock Default Datasets for a domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.1 | ColumnptpClockTransDefaultDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.2 | ColumnptpClockTransDefaultDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.3 | ColumnptpClockTransDefaultDSClockIdentity | read-only | current | This object specifies the value of the clockIdentity attribute of the local clock. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.4 | ColumnptpClockTransDefaultDSNumOfPorts | read-only | current | This object specifies the number of PTP ports of the device. These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.5 | ColumnptpClockTransDefaultDSDelay | read-only | current | This object, if the transparent clock is an end-to-end transparent clock, has the value of E2E; if the transparent clock is a peer-to-peer transparent clock, t… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.6 | ColumnptpClockTransDefaultDSPrimaryDomain | read-only | current | This object specifies the value of the primary syntonization domain. The initialization value shall be 0. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7 | TableptpClockPortTable | not-accessible | current | Table of information about the clock ports for a particular domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1 | RowptpClockPortEntry | not-accessible | current | An entry in the table, containing information about a single clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.1 | ColumnptpClockPortDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.2 | ColumnptpClockPortClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.3 | ColumnptpClockPortClockInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.4 | ColumnptpClockPortTablePortNumberIndex | not-accessible | current | This object specifies the PTP Portnumber for this port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.5 | ColumnptpClockPortName | read-only | current | This object specifies the PTP clock port name configured on the node. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.6 | ColumnptpClockPortRole | read-only | current | This object describes the current role (slave/master) of the port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.7 | ColumnptpClockPortSyncTwoStep | read-only | current | This object specifies that two-step clock operation between the PTP master and slave device is enabled. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.8 | ColumnptpClockPortCurrentPeerAddressType | read-only | current | This object specifies the current peer's network address type used for PTP communication. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.9 | ColumnptpClockPortCurrentPeerAddress | read-only | current | This object specifies the current peer's network address used for PTP communication. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.10 | ColumnptpClockPortNumOfAssociatedPorts | read-only | current | This object specifies - For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters av… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8 | TableptpClockPortDSTable | not-accessible | current | Table of information about the clock ports dataset for a particular domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1 | RowptpClockPortDSEntry | not-accessible | current | An entry in the table, containing port dataset information for a single clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.1 | ColumnptpClockPortDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.2 | ColumnptpClockPortDSClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.3 | ColumnptpClockPortDSClockInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.4 | ColumnptpClockPortDSPortNumberIndex | not-accessible | current | This object specifies the PTP portnumber associated with this PTP port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.5 | ColumnptpClockPortDSName | read-only | current | This object specifies the PTP clock port dataset name. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.6 | ColumnptpClockPortDSPortIdentity | read-only | current | This object specifies the PTP clock port Identity. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.7 | ColumnptpClockPortDSlogAnnouncementInterval | read-only | current | This object specifies the Announce message transmission interval associated with this clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.8 | ColumnptpClockPortDSAnnounceRctTimeout | read-only | current | This object specifies the Announce receipt timeout associated with this clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.9 | ColumnptpClockPortDSlogSyncInterval | read-only | current | This object specifies the Sync message transmission interval. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.10 | ColumnptpClockPortDSMinDelayReqInterval | read-only | current | This object specifies the Delay_Req message transmission interval. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.11 | ColumnptpClockPortDSPeerDelayReqInterval | read-only | current | This object specifies the Pdelay_Req message transmission interval. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.12 | ColumnptpClockPortDSDelayMech | read-only | current | This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value of the is e2e, else if the clock is a peer to-peer clock, the va… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.13 | ColumnptpClockPortDSPeerMeanPathDelay | read-only | current | This object specifies the peer meanPathDelay. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.14 | ColumnptpClockPortDSGrantDuration | read-only | current | This object specifies the grant duration allocated by the master. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.15 | ColumnptpClockPortDSPTPVersion | read-only | current | This object specifies the PTP version being used. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9 | TableptpClockPortRunningTable | not-accessible | current | Table of information about the clock ports running datasets for a particular domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1 | RowptpClockPortRunningEntry | not-accessible | current | An entry in the table, containing running dataset information about a single clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.1 | ColumnptpClockPortRunningDomainIndex | not-accessible | current | This object specifies the domain number used to create a logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.2 | ColumnptpClockPortRunningClockTypeIndex | not-accessible | current | This object specifies the clock type as defined in the Textual convention description. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.3 | ColumnptpClockPortRunningClockInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.4 | ColumnptpClockPortRunningPortNumberIndex | not-accessible | current | This object specifies the PTP portnumber associated with this clock port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.5 | ColumnptpClockPortRunningName | read-only | current | This object specifies the PTP clock port name. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.6 | ColumnptpClockPortRunningState | read-only | current | This object specifies the port state returned by PTP engine. initializing - In this state a port initializes its data sets, hardware, and communication facilit… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.7 | ColumnptpClockPortRunningRole | read-only | current | This object specifies the Clock Role. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.8 | ColumnptpClockPortRunningInterfaceIndex | read-only | current | This object specifies the interface on the node being used by the PTP Clock for PTP communication. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.9 | ColumnptpClockPortRunningTransport | read-only | current | This object specifies the transport protocol being used for PTP communication (the mapping used). |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.10 | ColumnptpClockPortRunningEncapsulationType | read-only | current | This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN, Pseudowire encapsulation...) for the PTP messages. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.11 | ColumnptpClockPortRunningTxMode | read-only | current | This object specifies the clock transmission mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.12 | ColumnptpClockPortRunningRxMode | read-only | current | This object specifies the clock receive mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: … |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.13 | ColumnptpClockPortRunningPacketsReceived | read-only | current | This object specifies the packets received on the clock port (cumulative). These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.14 | ColumnptpClockPortRunningPacketsSent | read-only | current | This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10 | TableptpClockPortTransDSTable | not-accessible | current | Table of information about the Transparent clock ports running dataset for a particular domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1 | RowptpClockPortTransDSEntry | not-accessible | current | An entry in the table, containing clock port Transparent dataset information about a single clock port |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.1 | ColumnptpClockPortTransDSDomainIndex | not-accessible | current | This object specifies the domain number used to create a Logical group of PTP devices. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.2 | ColumnptpClockPortTransDSInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.3 | ColumnptpClockPortTransDSPortNumberIndex | not-accessible | current | This object specifies the PTP port number associated with this port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.4 | ColumnptpClockPortTransDSPortIdentity | read-only | current | This object specifies the value of the PortIdentity attribute of the local port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.5 | ColumnptpClockPortTransDSlogMinPdelayReqInt | read-only | current | This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.6 | ColumnptpClockPortTransDSFaultyFlag | read-only | current | This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.7 | ColumnptpClockPortTransDSPeerMeanPathDelay | read-only | current | This object specifies, if the delayMechanism used is P2P, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11 | TableptpClockPortAssociateTable | not-accessible | current | Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1 | RowptpClockPortAssociateEntry | not-accessible | current | An entry in the table, containing information about a single associated port for the given clockport. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.1 | ColumnptpClockPortCurrentDomainIndex | not-accessible | current | This object specifies the given port's domain number. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.2 | ColumnptpClockPortCurrentClockTypeIndex | not-accessible | current | This object specifies the given port's clock type. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.3 | ColumnptpClockPortCurrentClockInstanceIndex | not-accessible | current | This object specifies the instance of the clock for this clock type in the given domain. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.4 | ColumnptpClockPortCurrentPortNumberIndex | not-accessible | current | This object specifies the PTP Port Number for the given port. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.5 | ColumnptpClockPortAssociatePortIndex | not-accessible | current | This object specifies the associated port's serial number in the current port's context. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.6 | ColumnptpClockPortAssociateAddressType | read-only | current | This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpWellKnownTransportTypes… |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.7 | ColumnptpClockPortAssociateAddress | read-only | current | This object specifies the peer port's network address used for PTP communication. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.8 | ColumnptpClockPortAssociatePacketsSent | read-only | current | The number of packets sent to this peer port from the current port. These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.9 | ColumnptpClockPortAssociatePacketsReceived | read-only | current | The number of packets received from this peer port by the current port. These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.10 | ColumnptpClockPortAssociateInErrors | read-only | current | This object specifies the input errors associated with the peer port. These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.11 | ColumnptpClockPortAssociateOutErrors | read-only | current | This object specifies the output errors associated with the peer port. These counters are discontinuous. |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12 | NodeptpWellKnownTransportTypes | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.1 | IdentityptpTransportTypeIPversion4 | current | IP version 4 | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.2 | IdentityptpTransportTypeIPversion6 | current | IP version 6 | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.3 | IdentityptpTransportTypeEthernet | current | Ethernet | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.4 | IdentityptpTransportTypeDeviceNET | current | Device NET | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.5 | IdentityptpTransportTypeControlNET | current | Control NET | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.6 | IdentityptpTransportTypeIEC61158 | current | IEC61158 | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13 | NodeptpWellKnownEncapsulationTypes | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.1 | IdentityptpEncapsulationTypeEthernet | current | Ethernet Encapsulation type. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.2 | IdentityptpEncapsulationTypeVLAN | current | VLAN Encapsulation type. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.3 | IdentityptpEncapsulationTypeUDPIPLSP | current | UDP/IP over MPLS Encapsulation type. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.4 | IdentityptpEncapsulationTypePWUDPIPLSP | current | UDP/IP Pseudowire over MPLS Encapsulation type. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.5 | IdentityptpEncapsulationTypePWEthernetLSP | current | Ethernet Pseudowire over MPLS Encapsulation type. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2 | NodeptpMIBConformance | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.2.1 | NodeptpMIBCompliances | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.2.1.1 | ComplianceptpMIBCompliancesSystemInfo | current | Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system level information of clock devices. Such devices can only be m… | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.1.2 | ComplianceptpMIBCompliancesClockInfo | current | Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock related information. Such devices can only be monitored using t… | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.1.3 | ComplianceptpMIBCompliancesClockPortInfo | current | Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock port related information. Such devices can only be monitored us… | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.1.4 | ComplianceptpMIBCompliancesTransparentClockInfo | current | Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide Transparent clock related information. Such devices can only be monit… | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2 | NodeptpMIBGroups | |||
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.1 | GroupptpMIBSystemInfoGroup | current | Group which aggregates objects describing system-wide information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.2 | GroupptpMIBClockCurrentDSGroup | current | Group which aggregates objects describing PTP Current Dataset information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.3 | GroupptpMIBClockParentDSGroup | current | Group which aggregates objects describing PTP Parent Dataset information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.4 | GroupptpMIBClockDefaultDSGroup | current | Group which aggregates objects describing PTP Default Dataset information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.5 | GroupptpMIBClockRunningGroup | current | Group which aggregates objects describing PTP running state information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.6 | GroupptpMIBClockTimepropertiesGroup | current | Group which aggregates objects describing PTP Time Properties information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.7 | GroupptpMIBClockTranparentDSGroup | current | Group which aggregates objects describing PTP Transparent Dataset information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.8 | GroupptpMIBClockPortGroup | current | Group which aggregates objects describing information for a given PTP Port. | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.9 | GroupptpMIBClockPortDSGroup | current | Group which aggregates objects describing PTP Port Dataset information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.10 | GroupptpMIBClockPortRunningGroup | current | Group which aggregates objects describing PTP running interface information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.11 | GroupptpMIBClockPortTransDSGroup | current | Group which aggregates objects describing PTP TransparentDS information | |
| 1.3.6.1.4.1.207.8.4.4.4.504.2.2.12 | GroupptpMIBClockPortAssociateGroup | current | Group which aggregates objects describing information on peer PTP ports for a given PTP clock-port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PtpClockDomainType | Unsigned32 (0..255) | current | The Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain. The following values define the valid domains. Value De… |
| PtpClockIdentity | OCTET STRING (SIZE (8)) | current | The clock Identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned nu… |
| PtpClockInstanceType | Unsigned32 (0..255) | current | The instance of the Clock of a given clock type in a given domain. |
| PtpClockIntervalBase2 | Integer32 (-128..127) | current | The interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in section 7.7.2.1 of [IEEE 1588-2008]. The mean time interval between successive messages shall be represented as the logari… |
| PtpClockMechanismType | INTEGER { e2e(1), p2p(2), disabled(254) } | current | The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE 1588-2008]. Delay mechanism Value(hex) Specification E… |
| PtpClockPortNumber | Unsigned32 (0..65535) | current | An index identifying a specific Precision Time Protocol (PTP) port on a PTP node. |
| PtpClockPortState | INTEGER { initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9) } | current | This is the value of the current state of the protocol engine associated with this port. Port state Value Description initializing 1 In this state a port initializes its data sets, hardware, and communication facilities… |
| PtpClockPortTransportTypeAddress | OCTET STRING (SIZE (1..255)) | current | The Clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defin… |
| PtpClockProfileType | INTEGER { default(1), telecom(2), vendorspecific(3) } | current | Clock Profile used. A profile is the set of allowed Precision Time Protocol (PTP) features applicable to a device. |
| PtpClockQualityAccuracyType | INTEGER { nanoSecond25(32), nanoSecond100(33), nanoSecond250(34), microSec1(35), microSec2dot5(36), microSec10(37), microSec25(38), microSec100(39), microSec250(40), milliSec1(41), milliSec2dot5(42), milliSec10(43), milliSec25(44), milliSec100(45), milliSec250(46), second1(47), second10(48), secondGreater10(49), unknown(254) } | current | The ClockQuality as specified in sections 5.3.7, 7.6.2.5 and Table 6 of [IEEE 1588-2008]. The following values are not represented in the enumerated values. 0x01-0x1F Reserved 0x32-0x7F Reserved It is important to note … |
| PtpClockQualityClassType | INTEGER { clockclass6(6), clockclass7(7), clockclass13(13), clockclass14(14), clockclass52(52), clockclass58(58) } | current | The ClockQuality as specified in section 5.3.7 ClockQuality, 7.6.2.4 clockClass and Table 5 clockClass specifications of [IEEE 1588-2008]. Value Description 0 Reserved to enable compatibility with future versions. 1-5 R… |
| PtpClockRoleType | INTEGER { master(1), slave(2) } | current | The Clock Role. The protocol generates a Master Slave relationship among the clocks in the system. Clock Role Value Description Master clock 1 A clock that is the source of time to which all other clocks on that path sy… |
| PtpClockStateType | INTEGER { freerun(1), holdover(2), acquiring(3), frequencyLocked(4), phaseAligned(5) } | current | The clock state returned by a PTP engine. Clock State Value Description Freerun state 1 Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting … |
| PtpClockTimeInterval | OCTET STRING (SIZE (1..255)) | current | This textual convention corresponds to the TimeInterval structure indicated in section 5.3.2 of [IEEE 1588-2008]. It will be presented in the form of a character array. Network byte order is assumed. The TimeInterval ty… |
| PtpClockTimeSourceType | INTEGER { atomicClock(16), gps(32), terrestrialRadio(48), ptp(64), ntp(80), handSet(96), other(144), internalOscillator(160) } | current | The ClockQuality as specified in Sections 5.3.7, 7.6.2.6 and Table 7 of [IEEE 1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Reserved It i… |
| PtpClockTxModeType | INTEGER { unicast(1), multicast(2), multicastmix(3) } | current | Transmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel |
| PtpClockType | INTEGER { ordinaryClock(1), boundaryClock(2), transparentClock(3), boundaryNode(4) } | current | The clock types as defined in the MIB module description. |