AT-SETUP-MIB
47 objects
The AT Setup MIB for managing the software installation and configuration files.
Imported Objects
| AT-SMI-MIB | modules |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.500 | Identitysetup | The AT Setup MIB for managing the software installation and configuration files. | ||
| 1.3.6.1.4.1.207.8.4.4.4.500.1 | ScalarrestartDevice | read-write | deprecated | This object forces a standalone unit or stack of devices to restart immediately when set with a value of 1. For a chassis switch, this object causes the whole … |
| 1.3.6.1.4.1.207.8.4.4.4.500.2 | Nodefirmware | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1 | NodecurrentFirmware | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.1 | ScalarcurrSoftVersion | read-only | current | The major.minor.interim version of the firmware that the device is currently running. Will return 0 if the version cannot be determined. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.2 | ScalarcurrSoftName | read-only | current | The name of the firmware that the device is currently running. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.3 | ScalarcurrSoftSaveAs | read-write | deprecated | Set with a filename to save the currently running software to the root of flash. Only one save operation can be executed at a time across all SNMP users, and t… |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.4 | ScalarcurrSoftSaveToFile | read-write | current | Set with a URL (e.g. 'flash:/filename.rel' or 'card:/filename.rel') to save the currently running software to the root of flash or SD card. Only one save opera… |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.5 | ScalarcurrSoftSaveStatus | read-only | current | Returns the status of any current operation to store the running software to a release file. The following values may be returned: 1 (idle) There is no release… |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.1.6 | ScalarcurrSoftLastSaveResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to save the running firmware to a release file. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.2 | NodenextBootFirmware | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.2.2.1 | ScalarnextBootVersion | read-only | current | The major.minor.interim version of the firmware that the device is currently set to boot from. Will return 0 if the version cannot be determined. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.2.2 | ScalarnextBootPath | read-write | current | The full path of the release to be used the next time the device restarts. There is no guarantee that the file referenced exists (i.e. it may have been deleted… |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.2.3 | ScalarnextBootSetStatus | read-only | current | Returns the status of any current operation to set the next boot release file. The following values may be returned: 1 (idle) There is no boot release setting … |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.2.4 | ScalarnextBootLastSetResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to set the boot release filename. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.3 | NodebackupFirmware | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.2.3.1 | ScalarbackupVersion | read-only | current | The major.minor.interim version of the firmware that the device will boot from as a backup. This will return 0 if the version cannot be determined. |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.3.2 | ScalarbackupPath | read-write | current | The full path of the release file to be used as a backup in the event of the main release file failing to boot. There is no guarantee that the file referenced … |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.3.3 | ScalarbackupSetStatus | read-only | current | Returns the status of any current operation to set the backup boot release file. The following values may be returned: 1 (idle) There is no backup boot release… |
| 1.3.6.1.4.1.207.8.4.4.4.500.2.3.4 | ScalarbackupLastSetResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to set the backup boot release filename. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3 | NodedeviceConfiguration | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1 | NoderunningConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1.1 | ScalarrunCnfgSaveAs | read-write | current | Set with a URL to save the running configuration to the flash or card filesystem using that filename (e.g. 'flash:/myconfig.cfg' or 'card:/myconfig.cfg'). Only… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1.2 | ScalarrunCnfgSaveAsStatus | read-only | current | Returns the status of any current operation to save the running configuration. The following values may be returned: 1 (idle) There is no config file save oper… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.1.3 | ScalarrunCnfgLastSaveResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to save the running configuration. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.2 | NodenextBootConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.3.2.1 | ScalarbootCnfgPath | read-write | current | The full path of the configuration file to be used the next time the device restarts. There is no guarantee that the file referenced exists (i.e. it may have b… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.2.2 | ScalarbootCnfgExists | read-only | current | This object will return TRUE if the currently defined boot configuration file exists, or FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.2.3 | ScalarbootCnfgSetStatus | read-only | current | Returns the status of any current operation to set the next boot configuration file. The following values may be returned: 1 (idle) There is no boot configurat… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.2.4 | ScalarbootCnfgLastSetResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to set the boot configuration filename. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.3 | NodedefaultConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.3.3.1 | ScalardfltCnfgPath | read-only | current | The full path of the configuration file to be used upon device restart, if no user-defined boot or backup configuration files can be found. There is no guarant… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.3.2 | ScalardfltCnfgExists | read-only | current | This object will return TRUE if the currently defined default configuration file exists, or FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.4 | NodebackupConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.3.4.1 | ScalarbackupCnfgPath | read-write | current | The full path of the backup configuration file to be used the next time the device restarts, if the boot configuration file cannot be accessed. There is no gua… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.4.2 | ScalarbackupCnfgExists | read-only | current | This object will return TRUE if the currently defined backup configuration file exists, or FALSE otherwise. |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.4.3 | ScalarbackupCnfgSetStatus | read-only | current | Returns the status of any current operation to set the next backup boot configuration file. The following values may be returned: 1 (idle) There is no backup b… |
| 1.3.6.1.4.1.207.8.4.4.4.500.3.4.4 | ScalarbackupCnfgLastSetResult | read-only | current | Gives an indication of the result of the last completed SNMP operation to set the backup boot configuration filename. |
| 1.3.6.1.4.1.207.8.4.4.4.500.4 | ScalarrestartStkMemberDevice | read-write | current | This object causes a specified device to restart immediately. The restart is initiated by setting its value to the device's stack member ID. For a chassis swit… |
| 1.3.6.1.4.1.207.8.4.4.4.500.5 | NodeserviceConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.5.1 | ScalarsrvcTelnetEnable | read-write | current | This object represents the state of the telnet server of a device. A management application can find out the telnet server is either enabled or disabled by rea… |
| 1.3.6.1.4.1.207.8.4.4.4.500.5.2 | ScalarsrvcSshEnable | read-write | current | This object represents the state of the ssh server of a device. A management application can find out the ssh server is either enabled or disabled by reading t… |
| 1.3.6.1.4.1.207.8.4.4.4.500.6 | NodeguiConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.6.1 | NodeguiAppletConfig | |||
| 1.3.6.1.4.1.207.8.4.4.4.500.6.1.1 | ScalarguiAppletSysSwVer | read-only | current | This object represents the system software release that the currently selected GUI applet was designed to run on. The system will automatically search for GUI … |
| 1.3.6.1.4.1.207.8.4.4.4.500.6.1.2 | ScalarguiAppletSwVer | read-only | current | This object represents the software version of the currently selected GUI applet. The system will automatically search for GUI applet files residing in the roo… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SystemFileOperationType | INTEGER { idle(1), success(2), failure(3), saving(4), syncing(5) } | current | Indicates the current status of an attempt to modify a system file setting. |