AT-SYSINFO-MIB
98 objects
Subtree beneath which system inforamtion ids are assigned. It contains generic system information, as follows: { sysinfo 1 } fanAndPs { sysinfo 2 } restartGroup { sysinfo 3 } cpu { sysinfo 4 } sysTemperature { sysinfo 5 } atrContactDetails { sysinfo 6 } bbrNvs { sysinfo 9 } hostId { sysinfo 10 } envMon { sysinfo 11 } xem { sysinfo 12 } awpEnvMon { sysinfo 13 } awpStack { sysinfo 14 } atPortInfo
Imported Objects
| AT-SMI-MIB | atRouter DisplayStringUnsized |
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.3 | Identitysysinfo | Subtree beneath which system inforamtion ids are assigned. It contains generic system information, as follows: { sysinfo 1 } fanAndPs { sysinfo 2 } restartGrou… | ||
| 1.3.6.1.4.1.207.8.4.4.3.1 | NodefanAndPs | |||
| 1.3.6.1.4.1.207.8.4.4.3.1.0 | NodefanAndPsTrap | |||
| 1.3.6.1.4.1.207.8.4.4.3.1.0.1 | NotificationfanAndPsRpsConnectionTrap | current | Generated when the RPS connection status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.2 | NotificationfanAndPsMainPSUStatusTrap | current | Generated when the main power supply status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.3 | NotificationfanAndPsRedundantPSUStatusTrap | current | Generated when the RPS status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.4 | NotificationfanAndPsMainFanStatusTrap | current | Generated when the main fan changes status. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.5 | NotificationfanAndPsRedundantFanStatusTrap | current | Generated when the redundant fan changes status. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.6 | NotificationfanAndPsTemperatureStatusTrap | current | Generated when the temperature changes status. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.7 | NotificationfanAndPsFanTrayPresentTrap | current | Generated when the fan tray presence status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.8 | NotificationfanAndPsFanTrayStatusTrap | current | Generated when the fan tray status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.9 | NotificationfanAndPsMainMonitoringStatusTrap | current | Generated when the main power supply monitoring status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.0.10 | NotificationfanAndPsAccelFanStatusTrap | current | Generated when the accelerator fans' status changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.1.1 | ScalarfanAndPsRpsConnectionStatus | read-only | current | The status of the Redundant Power Supply (RPS) connection, ie, whether an RPS is actually connected or not, regardless of whether the RPS is on or not. notSupp… |
| 1.3.6.1.4.1.207.8.4.4.3.1.2 | ScalarfanAndPsMainPSUStatus | read-only | current | The status of the main Power Supply. on means that the power supply is present and fully operational. off means that the power supply is totally off (and obvio… |
| 1.3.6.1.4.1.207.8.4.4.3.1.3 | ScalarfanAndPsRedundantPSUStatus | read-only | current | The status of the redundant Power Supply. notSupported means this device does not support redundant power supplies, on means that the redundant power supply is… |
| 1.3.6.1.4.1.207.8.4.4.3.1.4 | ScalarfanAndPsRpsMonitoringStatus | read-write | current | The current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this… |
| 1.3.6.1.4.1.207.8.4.4.3.1.5 | ScalarfanAndPsMainFanStatus | read-only | current | The status of the main Power Supply fan. notSupported means that this device does not support monitoring on the main power supply fan, or that there is no main… |
| 1.3.6.1.4.1.207.8.4.4.3.1.6 | ScalarfanAndPsRedundantFanStatus | read-only | current | The status of the redundant Power Supply Fan. notSupported means this device does not support redundant power supplies, ok means that the redundant power suppl… |
| 1.3.6.1.4.1.207.8.4.4.3.1.7 | ScalarfanAndPsTemperatureStatus | read-only | current | The status of temperature in this device. ok means that the device is not capable of monitoring temperature or that the temperature is OK, notOk means that the… |
| 1.3.6.1.4.1.207.8.4.4.3.1.8 | ScalarfanAndPsFanTrayPresent | read-only | current | The status of the presence of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. Upon removal of the fan tray … |
| 1.3.6.1.4.1.207.8.4.4.3.1.9 | ScalarfanAndPsFanTrayStatus | read-only | current | The status of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. The value ok is returned if all fans in the f… |
| 1.3.6.1.4.1.207.8.4.4.3.1.10 | ScalarfanAndPsMainMonitoringStatus | read-only | current | The current status of main power supply monitoring. The monitoring of the main power supply and its fan is always enabled by those systems that support it. Sys… |
| 1.3.6.1.4.1.207.8.4.4.3.1.11 | TablefanAndPsPsuStatusTable | not-accessible | current | The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table represents the status of one of the power supplies in AT8948 system. Each power supply has … |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1 | RowfanAndPsPsuStatusEntry | not-accessible | current | A single entry of AT8948 fanAndPsPsuStatusTable, indexed by fanAndPsPsuNumber field. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.1 | ColumnfanAndPsPsuNumber | read-only | current | The PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.2 | ColumnfanAndPsPsuPresent | read-only | current | The PSU present state, displayed as 'yes' if present, or 'no' if absent. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.3 | ColumnfanAndPsPsuType | read-only | current | The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.4 | ColumnfanAndPsPsuFan | read-only | current | The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.5 | ColumnfanAndPsPsuTemperature | read-only | current | The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED. |
| 1.3.6.1.4.1.207.8.4.4.3.1.11.1.6 | ColumnfanAndPsPsuPower | read-only | current | The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED. |
| 1.3.6.1.4.1.207.8.4.4.3.1.12 | ScalarfanAndPsAccelFanStatus | read-only | current | The status of the accelerator card fans. Non-supported means this device does not support monitoring of the accelerator card fans. |
| 1.3.6.1.4.1.207.8.4.4.3.2 | NoderestartGroup | |||
| 1.3.6.1.4.1.207.8.4.4.3.2.1 | Scalarrestart | read-write | current | A router/switch restart request. A management station can remotely instruct an ATI router/switch to action a warm or cold restart. Once all the appropriate int… |
| 1.3.6.1.4.1.207.8.4.4.3.2.2 | ScalarrestartCause | read-only | current | The reason for last time restart. |
| 1.3.6.1.4.1.207.8.4.4.3.2.3 | ScalarrestartLog | read-only | current | The restart logging details. |
| 1.3.6.1.4.1.207.8.4.4.3.2.11 | NotificationrestartNotification | current | A restart notification is a trap sent to tell snmp managers the reason of restarting | |
| 1.3.6.1.4.1.207.8.4.4.3.3 | Nodecpu | |||
| 1.3.6.1.4.1.207.8.4.4.3.3.1 | ScalarcpuUtilisationMax | read-only | current | Maximum CPU utilisation since the router was last restarted. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.2 | ScalarcpuUtilisationAvg | read-only | current | Average CPU utilisation since the router was last restarted. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.3 | ScalarcpuUtilisationAvgLastMinute | read-only | current | Average CPU utilisation over the past minute. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.4 | ScalarcpuUtilisationAvgLast10Seconds | read-only | current | Average CPU utilisation over the past ten seconds. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.5 | ScalarcpuUtilisationAvgLastSecond | read-only | current | Average CPU utilisation over the past second. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.6 | ScalarcpuUtilisationMaxLast5Minutes | read-only | current | Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.7 | ScalarcpuUtilisationAvgLast5Minutes | read-only | current | Average CPU utilisation over the past 5 minutes. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8 | TablecpuUtilisationStackTable | not-accessible | current | A list of stack members. For a chassis switch, this is a list of cards. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1 | RowcpuUtilisationStackEntry | not-accessible | current | A set of parameters that describe the CPU utilisation of a stack member. For a chassis switch, it corresponds to the CPU utilisation of a card. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.1 | ColumncpuUtilisationStackId | read-only | current | Stack member ID. For a chassis switch, it corresponds to the card ID. For VCStack Plus, 1-12 refers to the cards on VCS stack member 1 and 13-24 refers to the … |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.2 | ColumncpuUtilisationStackMax | read-only | current | Maximum CPU utilisation since the router was last restarted. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.3 | ColumncpuUtilisationStackAvg | read-only | current | Average CPU utilisation since the router was last restarted. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.4 | ColumncpuUtilisationStackAvgLastMinute | read-only | current | Average CPU utilisation over the past minute. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.5 | ColumncpuUtilisationStackAvgLast10Seconds | read-only | current | Average CPU utilisation over the past ten seconds. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.6 | ColumncpuUtilisationStackAvgLastSecond | read-only | current | Average CPU utilisation over the past second. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.7 | ColumncpuUtilisationStackMaxLast5Minutes | read-only | current | Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.3.8.1.8 | ColumncpuUtilisationStackAvgLast5Minutes | read-only | current | Average CPU utilisation over the past 5 minutes. Expressed as a percentage. |
| 1.3.6.1.4.1.207.8.4.4.3.4 | NodesysTemperature | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.1 | NodegeneralTemperature | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.1.0 | NodegeneralTemperatureTrap | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.1.0.1 | NotificationgeneralTemperatureStatusTrap | current | Generated when the temperature status of the device changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.4.1.1 | ScalargeneralTemperatureSupported | read-only | current | The value supported indicates general temperature is displayed by the device. The value notSupported indicates the device displays specific temperature informa… |
| 1.3.6.1.4.1.207.8.4.4.3.4.1.2 | ScalargeneralTemperatureActualTemp | read-only | current | The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable. |
| 1.3.6.1.4.1.207.8.4.4.3.4.1.3 | ScalargeneralTemperatureStatus | read-only | current | The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperatur… |
| 1.3.6.1.4.1.207.8.4.4.3.4.1.4 | ScalargeneralTemperatureThreshold | read-write | current | The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status. |
| 1.3.6.1.4.1.207.8.4.4.3.4.2 | NodesbTemperature | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.2.0 | NodesbTemperatureTrap | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.2.0.1 | NotificationsbTempFixedThresholdTrap | current | Trap occurs when fixed threshold status changes. The actual temperature and the fixed threshold are also given. | |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.0.2 | NotificationsbTempSettableThresholdTrap | current | Trap occurs when settable threshold status changes. The actual temperature and the settable threshold are also given. | |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1 | TablesbTempTable | not-accessible | current | The table of SwitchBlade sysTemperature. Each entry in the table represents temperature monitoring from one of the CPU cards which may be present in the Switch… |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1 | RowsbTempEntry | not-accessible | current | A single entry of SwitchBlade sysTemperature |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1 | ColumnsbTempIndex | read-only | current | The board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is ma… |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2 | ColumnsbTempActualTemperature | read-only | current | The actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals. |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3 | ColumnsbTempFixedThresholdStatus | read-only | current | The temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable repre… |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4 | ColumnsbTempSettableThresholdStatus | read-only | current | The temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. Th… |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5 | ColumnsbTempSettableThreshold | read-write | current | The value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTem… |
| 1.3.6.1.4.1.207.8.4.4.3.4.2.2 | ScalarsbTempFixedThreshold | read-only | current | The value of the fixed temperature threshold. This value is fixed for both CPU cards, and cannot be set. |
| 1.3.6.1.4.1.207.8.4.4.3.4.3 | NodeacceleratorTemperature | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.3.0 | NodeacceleratorTemperatureTrap | |||
| 1.3.6.1.4.1.207.8.4.4.3.4.3.0.1 | NotificationacceleratorTemperatureStatusTrap | current | Generated when the temperature status of the device changes. | |
| 1.3.6.1.4.1.207.8.4.4.3.4.3.1 | ScalaracceleratorTemperatureSupported | read-only | current | The value supported indicates whether accelerator card temperature is displayed by the device. The value notSupported indicates the device does not display spe… |
| 1.3.6.1.4.1.207.8.4.4.3.4.3.2 | ScalaracceleratorTemperatureActualTemp | read-only | current | The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable. |
| 1.3.6.1.4.1.207.8.4.4.3.4.3.3 | ScalaracceleratorTemperatureStatus | read-only | current | The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperatur… |
| 1.3.6.1.4.1.207.8.4.4.3.4.3.4 | ScalaracceleratorTemperatureThreshold | read-only | current | The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status. |
| 1.3.6.1.4.1.207.8.4.4.3.5 | ScalaratContactDetails | read-only | current | The contact details for Allied Telesis inc. |
| 1.3.6.1.4.1.207.8.4.4.3.6 | NodebbrNvs | |||
| 1.3.6.1.4.1.207.8.4.4.3.6.0 | NodebbrNvsTrap | |||
| 1.3.6.1.4.1.207.8.4.4.3.6.0.1 | NotificationbbrNvsReinitialiseTrap | current | Generated at boot when the device detects that the BBR has been corrupted and reinitialised. This can happen if the device's BBR battery has run down, and the … | |
| 1.3.6.1.4.1.207.8.4.4.3.7 | Nodememory | |||
| 1.3.6.1.4.1.207.8.4.4.3.7.1 | ScalarfreeMemory | read-only | current | Percentage of free memory still available on device |
| 1.3.6.1.4.1.207.8.4.4.3.7.2 | ScalartotalBuffers | read-only | current | Total number of buffers available on device |
| 1.3.6.1.4.1.207.8.4.4.3.7.11 | NotificationlowMemoryTrap | current | A low memory trap is generated when a router's memory has gone below a certain level. | |
| 1.3.6.1.4.1.207.8.4.4.3.8 | ScalarrealTimeClockStatus | read-only | current | Shows the status of the real time clock |
| 1.3.6.1.4.1.207.8.4.4.3.9 | ScalarhostId | read-write | current | Host Identifier of this device |
| 1.3.6.1.4.1.207.8.4.4.3.14 | NodeatPortInfo | |||
| 1.3.6.1.4.1.207.8.4.4.3.14.1 | TableatPortInfoTransceiverTable | not-accessible | current | A table of information about the transceiver of a interface. |
| 1.3.6.1.4.1.207.8.4.4.3.14.1.1 | RowatPortInfoTransceiverEntry | not-accessible | current | The description, the transceiver type of a interface. |
| 1.3.6.1.4.1.207.8.4.4.3.14.1.1.1 | ColumnatPortInfoTransceiverifIndex | read-only | current | The ifIndex for the interface represented by this entry of the interfaces table. |
| 1.3.6.1.4.1.207.8.4.4.3.14.1.1.2 | ColumnatPortInfoTransceiverType | read-only | current | This object indicates the type of transceiver on a interface. |
| 1.3.6.1.4.1.207.8.4.4.3.14.2 | ScalaratPortRenumberEvents | read-only | current | The number of times that port number values (represented by the dot1dBasePort object in BRIDGE-MIB), have been re-assigned due to stack member leave/join event… |