MIB Viewer

ATKK-WLAN-ACCESS

66 objects
Private MIB for the AT-TQ series wireless access point.
Imported Objects
AT-SMI-MIBwirelesslan wirelessLanmMIB
SNMPv2-SMICounter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TCMacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.207.1.13.13Nodetq2403
1.3.6.1.4.1.207.1.13.19Nodetq2450
1.3.6.1.4.1.207.1.13.20Nodetq2403ex
1.3.6.1.4.1.207.1.13.22Nodetq3600
1.3.6.1.4.1.207.1.13.24Nodetq3200
1.3.6.1.4.1.207.1.13.25Nodetq3400
1.3.6.1.4.1.207.1.13.26Nodetq4400
1.3.6.1.4.1.207.1.13.27Nodetq4600
1.3.6.1.4.1.207.1.13.34Nodetq4400e
1.3.6.1.4.1.207.8.42.6IdentityatkkWlanAccessPrivate MIB for the AT-TQ series wireless access point.
1.3.6.1.4.1.207.8.42.6.1ScalaratkkWiAcVersionread-onlycurrentThe version number of this MIB module
1.3.6.1.4.1.207.8.42.6.2IdentityatkkWiAcClientscurrentConnected Stations List. This list consists of entries which describe STAs which are currently connected (associated) to the AP.
1.3.6.1.4.1.207.8.42.6.2.1TableatkkWiAcClientTablenot-accessiblecurrentA table that contains information about STAs which are currently connected to the AP.
1.3.6.1.4.1.207.8.42.6.2.1.1RowatkkWiAcClientEntrynot-accessiblecurrentInformation about a STA.
1.3.6.1.4.1.207.8.42.6.2.1.1.1ColumnatkkWiAcClientAddressread-onlycurrentMAC address identifying a peer STA.
1.3.6.1.4.1.207.8.42.6.2.1.1.2ColumnatkkWiAcClientSSIDread-onlycurrentSSID to which the STA is associated.
1.3.6.1.4.1.207.8.42.6.2.1.1.3ColumnatkkWiAcClient80211Specread-onlycurrent802.11 technology which the STA is using.
1.3.6.1.4.1.207.8.42.6.2.1.1.4ColumnatkkWiAcClientChannelread-onlycurrentThe radio channel which the STA is using.
1.3.6.1.4.1.207.8.42.6.2.1.1.5ColumnatkkWiAcClientAgeread-onlycurrentTime (in seconds) since the STA was associated.
1.3.6.1.4.1.207.8.42.6.2.1.1.6ColumnatkkWiAcClientUserIDread-onlycurrentUserID of the STA which is associated.
1.3.6.1.4.1.207.8.42.6.3IdentityatkkWiAcAPscurrentNeighboring APs List. This list consists of entries which describe APs which is found by the AP.
1.3.6.1.4.1.207.8.42.6.3.1TableatkkWiAcAPTablenot-accessiblecurrentA table that contains information about APs nearby.
1.3.6.1.4.1.207.8.42.6.3.1.1RowatkkWiAcAPEntrynot-accessiblecurrentInformation about a neighboring AP.
1.3.6.1.4.1.207.8.42.6.3.1.1.1ColumnatkkWiAcAPAddressread-onlycurrentMAC address of the neighbor AP.
1.3.6.1.4.1.207.8.42.6.3.1.1.2ColumnatkkWiAcAPSSIDread-onlycurrentSSID of the neighbor AP.
1.3.6.1.4.1.207.8.42.6.3.1.1.3ColumnatkkWiAcAP80211Specread-onlycurrent802.11 technology which the neighbor AP is using.
1.3.6.1.4.1.207.8.42.6.3.1.1.4ColumnatkkWiAcAPChannelread-onlycurrentThe radio channel which the neighbor AP is using.
1.3.6.1.4.1.207.8.42.6.3.1.1.5ColumnatkkWiAcAPRSSIread-onlycurrentRSSI (signal strength) of the neighbor AP.
1.3.6.1.4.1.207.8.42.6.3.1.1.6ColumnatkkWiAcAPRadarDetectedread-onlycurrentThe message of Radar Detected.
1.3.6.1.4.1.207.8.42.6.3.1.1.7ColumnatkkWiAcAPChannelsread-onlycurrentThe channels of Radar Detected.
1.3.6.1.4.1.207.8.42.6.3.2ScalaratkkWiAcAPDetectConfigread-writecurrentThe enable/disable configuration of the Neighbor AP detection. wlan0/wlan1 for TQ2403/EX wlan0 for TQ2450/TQ3600/TQ3200/TQ3400/TQ4400/TQ4600/TQ4400e
1.3.6.1.4.1.207.8.42.6.3.3ScalaratkkWiAcAPDetectConfig2read-writecurrentThe enable/disable configuration of the Neighbor AP detection. wlan1 for TQ2450/TQ3600/TQ3400/TQ4400/TQ4600/TQ4400e
1.3.6.1.4.1.207.8.42.6.4IdentityatkkWiAcMacACLcurrentMAC address filters List.
1.3.6.1.4.1.207.8.42.6.4.1TableatkkWiAcMacACLTablenot-accessiblecurrentA table that contains MAC address filters.
1.3.6.1.4.1.207.8.42.6.4.1.1RowatkkWiAcMacACLEntrynot-accessiblecurrentMAC address filter.
1.3.6.1.4.1.207.8.42.6.4.1.1.1ColumnatkkWiAcMacACLAddressread-onlycurrentMAC address which is filtered.
1.3.6.1.4.1.207.8.42.6.4.2ScalaratkkWiAcMacACLModeConfigread-writecurrentThe mode configuration of the MAC filtering.
1.3.6.1.4.1.207.8.42.6.5NodeatkkWiAcNotification
1.3.6.1.4.1.207.8.42.6.5.0NodeatkkWiAcNotificationObjects
1.3.6.1.4.1.207.8.42.6.5.0.1NotificationatkkWiAcAssociatedcurrentThis notification is sent when a STA was connected.
1.3.6.1.4.1.207.8.42.6.5.0.2NotificationatkkWiAcDisassociatedcurrentThis notification is sent when a STA was disconnected.
1.3.6.1.4.1.207.8.42.6.5.0.3NotificationatkkWiAcUnknownAPcurrentThis notification is sent when an unknown AP was detected.
1.3.6.1.4.1.207.8.42.6.5.0.4NotificationatkkWiAcFilteredcurrentThis notification is sent when an STA was denied by MAC filters.
1.3.6.1.4.1.207.8.42.6.5.0.5NotificationatkkWiAcRadiusAuthSucceededcurrentThis notification is sent when RADIUS authentication of an STA succeeded.
1.3.6.1.4.1.207.8.42.6.5.0.6NotificationatkkWiAcRadiusAuthFailedcurrentThis notification is sent when RADIUS authentication of an STA failed.
1.3.6.1.4.1.207.8.42.6.5.0.7NotificationatkkWiAcRadarDetectedcurrentThis notification is sent when Radar detected.
1.3.6.1.4.1.207.8.42.6.6IdentityatkkWiAcApInfocurrentAP information
1.3.6.1.4.1.207.8.42.6.6.1TableatkkWiAcApInfoTrapTablenot-accessiblecurrentTable that contains information about a trap configuration of this AP.
1.3.6.1.4.1.207.8.42.6.6.1.1RowatkkWiAcApInfoTrapEntrynot-accessiblecurrentInformation about a trap configuration.
1.3.6.1.4.1.207.8.42.6.6.1.1.1ColumnatkkWiAcApTrapHostread-onlycurrentTrapHost configuration of this AP.
1.3.6.1.4.1.207.8.42.6.6.1.1.2ColumnatkkWiAcApTrapCommunityread-onlycurrentTrapCommunity configuration of this AP.
1.3.6.1.4.1.207.8.42.6.6.1.1.3ColumnatkkWiAcApTrapColdStartConfigread-onlycurrentEnable/disable configuration of the ColdStart trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.4ColumnatkkWiAcApTrapLinkConfigread-onlycurrentEnable/disable configuration of the Link up/down trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.5ColumnatkkWiAcApTrapAuthenticationConfigread-onlycurrentEnable/disable configuration of the Authentication trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.6ColumnatkkWiAcApTrapAssociationConfigread-onlycurrentEnable/disable configuration of an STA Association/Disassociation trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.7ColumnatkkWiAcApTrapUnknownApConfigread-onlycurrentEnable/disable configuration of an Unknown AP detection trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.8ColumnatkkWiAcApTrapFilteredStaConfigread-onlycurrentEnable/disable configuration of a Filtered STA detection trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.9ColumnatkkWiAcApTrapRadiusAuthSuccessConfigread-onlycurrentEnable/disable configuration of the RADIUS Authentication success trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.10ColumnatkkWiAcApTrapRadiusAuthFailConfigread-onlycurrentEnable/disable configuration of the RADIUS Authentication fail trap.
1.3.6.1.4.1.207.8.42.6.6.1.1.11ColumnatkkWiAcApTrapDfsDetectedConfigread-onlycurrentEnable/disable configuration of the DFS Detected trap.
Type Definitions
NameSyntaxStatusDescription
ChannelStringOCTET STRING (SIZE (1..32))currentThis type is string for channels which detected radar.
CommunityStringOCTET STRING (SIZE (1..256))currentThis type is string for trap community.
SsidStringOCTET STRING (SIZE (0..32))currentThis type is string for SSID(Service Set ID).
TrapHostStringOCTET STRING (SIZE (1..256))currentThis type is string for trap host IP address/hostname.
TrapStringOCTET STRING (SIZE (1..256))currentThis type is string for trap messages.
UserIdStringOCTET STRING (SIZE (0..255))currentThis type is string for RADIUS UserID.