ATM-FORUM-ILMI40-MIB
171 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.1 | NodeatmForumAdmin | |||
| 1.3.6.1.4.1.353.1 | NodeatmfVpcChange | An atmfVpcChange trap indicates that a permanent VPC has been added or deleted at this ATM Interface or that the attributes of an existing VPC have been modifi… | ||
| 1.3.6.1.4.1.353.1.2 | NodeatmfTransmissionTypes | |||
| 1.3.6.1.4.1.353.1.2.1 | NodeatmfUnknownType | |||
| 1.3.6.1.4.1.353.1.2.2 | NodeatmfSonetSTS3c | |||
| 1.3.6.1.4.1.353.1.2.3 | NodeatmfDs3 | |||
| 1.3.6.1.4.1.353.1.2.4 | Nodeatmf4B5B | |||
| 1.3.6.1.4.1.353.1.2.5 | Nodeatmf8B10B | |||
| 1.3.6.1.4.1.353.1.2.6 | NodeatmfSonetSTS12c | |||
| 1.3.6.1.4.1.353.1.2.7 | NodeatmfE3 | |||
| 1.3.6.1.4.1.353.1.2.8 | NodeatmfT1 | |||
| 1.3.6.1.4.1.353.1.2.9 | NodeatmfE1 | |||
| 1.3.6.1.4.1.353.1.3 | NodeatmfMediaTypes | |||
| 1.3.6.1.4.1.353.1.3.1 | NodeatmfMediaUnknownType | |||
| 1.3.6.1.4.1.353.1.3.2 | NodeatmfMediaCoaxCable | |||
| 1.3.6.1.4.1.353.1.3.3 | NodeatmfMediaSingleMode | |||
| 1.3.6.1.4.1.353.1.3.4 | NodeatmfMediaMultiMode | |||
| 1.3.6.1.4.1.353.1.3.5 | NodeatmfMediaStp | |||
| 1.3.6.1.4.1.353.1.3.6 | NodeatmfMediaUtp | |||
| 1.3.6.1.4.1.353.1.4 | NodeatmfTrafficDescrTypes | |||
| 1.3.6.1.4.1.353.1.4.1 | NodeatmfNoDescriptor | |||
| 1.3.6.1.4.1.353.1.4.2 | NodeatmfPeakRate | |||
| 1.3.6.1.4.1.353.1.4.3 | NodeatmfNoClpNoScr | |||
| 1.3.6.1.4.1.353.1.4.4 | NodeatmfClpNoTaggingNoScr | |||
| 1.3.6.1.4.1.353.1.4.5 | NodeatmfClpTaggingNoScr | |||
| 1.3.6.1.4.1.353.1.4.6 | NodeatmfNoClpScr | |||
| 1.3.6.1.4.1.353.1.4.7 | NodeatmfClpNoTaggingScr | |||
| 1.3.6.1.4.1.353.1.4.8 | NodeatmfClpTaggingScr | |||
| 1.3.6.1.4.1.353.1.4.9 | NodeatmfClpNoTaggingMcr | |||
| 1.3.6.1.4.1.353.1.5 | NodeatmfSrvcRegTypes | |||
| 1.3.6.1.4.1.353.1.5.1 | NodeatmfSrvcRegLecs | |||
| 1.3.6.1.4.1.353.1.5.2 | NodeatmfSrvcRegAns | |||
| 1.3.6.1.4.1.353.2 | NodeatmForumUni | |||
| 1.3.6.1.4.1.353.2 | NodeatmfVccChange | An atmfVccChange trap indicates that a permanent VCC has been added or deleted at this ATM Interface or that the attributes of an existing VCC have been modifi… | ||
| 1.3.6.1.4.1.353.2.1 | NodeatmfPhysicalGroup | |||
| 1.3.6.1.4.1.353.2.1.1 | TableatmfPortTable | not-accessible | mandatory | A table of physical layer status and parameter information for the ATM Interface's physical interface. |
| 1.3.6.1.4.1.353.2.1.1.1 | RowatmfPortEntry | not-accessible | mandatory | An entry in the table, containing information about the physical layer of an ATM Interface. |
| 1.3.6.1.4.1.353.2.1.1.1.1 | ColumnatmfPortIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.1.1.1.2 | ColumnatmfPortAddress | read-only | obsolete | This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined in th… |
| 1.3.6.1.4.1.353.2.1.1.1.3 | ColumnatmfPortTransmissionType | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management M… |
| 1.3.6.1.4.1.353.2.1.1.1.4 | ColumnatmfPortMediaType | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management M… |
| 1.3.6.1.4.1.353.2.1.1.1.5 | ColumnatmfPortOperStatus | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management M… |
| 1.3.6.1.4.1.353.2.1.1.1.6 | ColumnatmfPortSpecific | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management M… |
| 1.3.6.1.4.1.353.2.1.1.1.7 | ColumnatmfPortMyIfName | read-only | mandatory | A textual name of this interface. If this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with th… |
| 1.3.6.1.4.1.353.2.1.1.1.8 | ColumnatmfPortMyIfIdentifier | read-only | mandatory | A unique value for each ATM interface. The scheme used to number the ATM interfaces on an ATM device is implementation specific. One way to generate this value… |
| 1.3.6.1.4.1.353.2.1.2 | ScalaratmfMyIpNmAddress | read-only | mandatory | An IP Address to which a Network Management Station can send Network Management protocol messages, e.g. SNMP messages to UDP port 161, in order to access netwo… |
| 1.3.6.1.4.1.353.2.1.3 | ScalaratmfMyOsiNmNsapAddress | read-only | mandatory | An NSAP Address to which a Network Management Station can send Network Management protocol messages in order to access network management information concernin… |
| 1.3.6.1.4.1.353.2.1.4 | ScalaratmfMySystemIdentifier | read-only | mandatory | A 48 bit identifier, taken from the IEEE universally administered MAC address space, which uniquely identifies the ATM device local to this IME. |
| 1.3.6.1.4.1.353.2.2 | NodeatmfAtmLayerGroup | |||
| 1.3.6.1.4.1.353.2.2.1 | TableatmfAtmLayerTable | not-accessible | mandatory | A table of ATM layer status and parameter information for the ATM Interface. |
| 1.3.6.1.4.1.353.2.2.1.1 | RowatmfAtmLayerEntry | not-accessible | mandatory | An entry in the table, containing information about the ATM layer of an ATM Interface. |
| 1.3.6.1.4.1.353.2.2.1.1.1 | ColumnatmfAtmLayerIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.2.1.1.2 | ColumnatmfAtmLayerMaxVPCs | read-only | mandatory | The maximum number of switched and permanent VPCs supported on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), the maximum number o… |
| 1.3.6.1.4.1.353.2.2.1.1.3 | ColumnatmfAtmLayerMaxVCCs | read-only | mandatory | The maximum number of switched and permanent VCCs supported on this ATM Interface. |
| 1.3.6.1.4.1.353.2.2.1.1.4 | ColumnatmfAtmLayerConfiguredVPCs | read-only | mandatory | The number of permanent VPCs configured for use on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), the maximum number … |
| 1.3.6.1.4.1.353.2.2.1.1.5 | ColumnatmfAtmLayerConfiguredVCCs | read-only | mandatory | The number of permanent VCCs configured for use on this ATM Interface. |
| 1.3.6.1.4.1.353.2.2.1.1.6 | ColumnatmfAtmLayerMaxVpiBits | read-only | mandatory | The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and… |
| 1.3.6.1.4.1.353.2.2.1.1.7 | ColumnatmfAtmLayerMaxVciBits | read-only | mandatory | The maximum number of active VCI bits on this ATM Interface. |
| 1.3.6.1.4.1.353.2.2.1.1.8 | ColumnatmfAtmLayerUniType | read-only | mandatory | The type of the ATM device, either public or private. |
| 1.3.6.1.4.1.353.2.2.1.1.9 | ColumnatmfAtmLayerUniVersion | read-only | mandatory | An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. If this value is not present, a vers… |
| 1.3.6.1.4.1.353.2.2.1.1.10 | ColumnatmfAtmLayerDeviceType | read-only | mandatory | This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational … |
| 1.3.6.1.4.1.353.2.2.1.1.11 | ColumnatmfAtmLayerIlmiVersion | read-only | mandatory | An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the … |
| 1.3.6.1.4.1.353.2.2.1.1.12 | ColumnatmfAtmLayerNniSigVersion | read-only | mandatory | An indication of the latest version of the ATM Forum PNNI Signalling Specification that is supported on this ATM Interface. Note that the PNNI routing version … |
| 1.3.6.1.4.1.353.2.2.1.1.13 | ColumnatmfAtmLayerMaxSvpcVpi | read-only | mandatory | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections. |
| 1.3.6.1.4.1.353.2.2.1.1.14 | ColumnatmfAtmLayerMaxSvccVpi | read-only | mandatory | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections. |
| 1.3.6.1.4.1.353.2.2.1.1.15 | ColumnatmfAtmLayerMinSvccVci | read-only | mandatory | This is the minimum VCI value that the signalling stack is configured to support for allocation to switched virtual channel connections. The same value applies… |
| 1.3.6.1.4.1.353.2.3 | NodeatmfAtmStatsGroup | |||
| 1.3.6.1.4.1.353.2.3.1 | TableatmfAtmStatsTable | not-accessible | deprecated | This group is deprecated and should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.3.1.1 | RowatmfAtmStatsEntry | not-accessible | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.3.1.1.1 | ColumnatmfAtmStatsIndex | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.3.1.1.2 | ColumnatmfAtmStatsReceivedCells | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.3.1.1.3 | ColumnatmfAtmStatsDroppedReceivedCells | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.3.1.1.4 | ColumnatmfAtmStatsTransmittedCells | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.4 | NodeatmfVpcGroup | |||
| 1.3.6.1.4.1.353.2.4.1 | TableatmfVpcTable | not-accessible | mandatory | A table of status and parameter information on the virtual path connections which cross this ATM Interface. There is one entry in this table for each permanent… |
| 1.3.6.1.4.1.353.2.4.1.1 | RowatmfVpcEntry | not-accessible | mandatory | An entry in the table, containing information about a particular virtual path connection. |
| 1.3.6.1.4.1.353.2.4.1.1.1 | ColumnatmfVpcPortIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.4.1.1.2 | ColumnatmfVpcVpi | read-only | mandatory | The VPI value of this Virtual Path Connection at the local ATM Interface. |
| 1.3.6.1.4.1.353.2.4.1.1.3 | ColumnatmfVpcOperStatus | read-only | mandatory | The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local stat… |
| 1.3.6.1.4.1.353.2.4.1.1.4 | ColumnatmfVpcTransmitTrafficDescriptorType | read-only | mandatory | The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These para… |
| 1.3.6.1.4.1.353.2.4.1.1.5 | ColumnatmfVpcTransmitTrafficDescriptorParam1 | read-only | mandatory | The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.6 | ColumnatmfVpcTransmitTrafficDescriptorParam2 | read-only | mandatory | The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.7 | ColumnatmfVpcTransmitTrafficDescriptorParam3 | read-only | mandatory | The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.8 | ColumnatmfVpcTransmitTrafficDescriptorParam4 | read-only | mandatory | The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.9 | ColumnatmfVpcTransmitTrafficDescriptorParam5 | read-only | mandatory | The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.10 | ColumnatmfVpcReceiveTrafficDescriptorType | read-only | mandatory | The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more paramete… |
| 1.3.6.1.4.1.353.2.4.1.1.11 | ColumnatmfVpcReceiveTrafficDescriptorParam1 | read-only | mandatory | The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.12 | ColumnatmfVpcReceiveTrafficDescriptorParam2 | read-only | mandatory | The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.13 | ColumnatmfVpcReceiveTrafficDescriptorParam3 | read-only | mandatory | The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.14 | ColumnatmfVpcReceiveTrafficDescriptorParam4 | read-only | mandatory | The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.15 | ColumnatmfVpcReceiveTrafficDescriptorParam5 | read-only | mandatory | The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.4.1.1.16 | ColumnatmfVpcQoSCategory | read-only | obsolete | This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. |
| 1.3.6.1.4.1.353.2.4.1.1.17 | ColumnatmfVpcTransmitQoSClass | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.4.1.1.18 | ColumnatmfVpcReceiveQoSClass | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.4.1.1.19 | ColumnatmfVpcBestEffortIndicator | read-only | mandatory | The object is examined when atmfVpcTransmitTrafficDescriptorType or atmfVpcReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoSc… |
| 1.3.6.1.4.1.353.2.4.1.1.20 | ColumnatmfVpcServiceCategory | read-only | mandatory | The service category of this virtual path connection. |
| 1.3.6.1.4.1.353.2.5 | NodeatmfVccGroup | |||
| 1.3.6.1.4.1.353.2.5.1 | TableatmfVccTable | not-accessible | mandatory | A table of status and parameter information on the virtual channel connections which are visible at this ATM Interface. There is one entry in this table for ea… |
| 1.3.6.1.4.1.353.2.5.1.1 | RowatmfVccEntry | not-accessible | mandatory | An entry in the table, containing information about a particular virtual channel connection. |
| 1.3.6.1.4.1.353.2.5.1.1.1 | ColumnatmfVccPortIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.5.1.1.2 | ColumnatmfVccVpi | read-only | mandatory | The VPI value of this Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no meaning … |
| 1.3.6.1.4.1.353.2.5.1.1.3 | ColumnatmfVccVci | read-only | mandatory | The VCI value of this Virtual Channel Connection at the local ATM Interface. |
| 1.3.6.1.4.1.353.2.5.1.1.4 | ColumnatmfVccOperStatus | read-only | mandatory | The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is kn… |
| 1.3.6.1.4.1.353.2.5.1.1.5 | ColumnatmfVccTransmitTrafficDescriptorType | read-only | mandatory | The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These para… |
| 1.3.6.1.4.1.353.2.5.1.1.6 | ColumnatmfVccTransmitTrafficDescriptorParam1 | read-only | mandatory | The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.7 | ColumnatmfVccTransmitTrafficDescriptorParam2 | read-only | mandatory | The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.8 | ColumnatmfVccTransmitTrafficDescriptorParam3 | read-only | mandatory | The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.9 | ColumnatmfVccTransmitTrafficDescriptorParam4 | read-only | mandatory | The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.10 | ColumnatmfVccTransmitTrafficDescriptorParam5 | read-only | mandatory | The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.11 | ColumnatmfVccReceiveTrafficDescriptorType | read-only | mandatory | The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more paramete… |
| 1.3.6.1.4.1.353.2.5.1.1.12 | ColumnatmfVccReceiveTrafficDescriptorParam1 | read-only | mandatory | The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.13 | ColumnatmfVccReceiveTrafficDescriptorParam2 | read-only | mandatory | The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.14 | ColumnatmfVccReceiveTrafficDescriptorParam3 | read-only | mandatory | The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.15 | ColumnatmfVccReceiveTrafficDescriptorParam4 | read-only | mandatory | The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.16 | ColumnatmfVccReceiveTrafficDescriptorParam5 | read-only | mandatory | The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType. |
| 1.3.6.1.4.1.353.2.5.1.1.17 | ColumnatmfVccQoSCategory | read-only | obsolete | This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. |
| 1.3.6.1.4.1.353.2.5.1.1.18 | ColumnatmfVccTransmitQoSClass | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.5.1.1.19 | ColumnatmfVccReceiveQoSClass | read-only | deprecated | This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. |
| 1.3.6.1.4.1.353.2.5.1.1.20 | ColumnatmfVccBestEffortIndicator | read-only | mandatory | The object is examined when atmfVccTransmitTrafficDescriptorType or atmfVccReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoSc… |
| 1.3.6.1.4.1.353.2.5.1.1.21 | ColumnatmfVccTransmitFrameDiscard | read-only | mandatory | If set to true(1), this object indicates that the network is requested to treat data for this connection (in the transmit direction) as frames (e.g. AAL5 CPCS_… |
| 1.3.6.1.4.1.353.2.5.1.1.22 | ColumnatmfVccReceiveFrameDiscard | read-only | mandatory | If set to true(1), this object indicates that the network is requested to treat data for this connection (in the receive direction) as frames (e.g. AAL5 CPCS_P… |
| 1.3.6.1.4.1.353.2.5.1.1.23 | ColumnatmfVccServiceCategory | read-only | mandatory | The service category of this virtual channel connection. |
| 1.3.6.1.4.1.353.2.6 | NodeatmfAddressGroup | |||
| 1.3.6.1.4.1.353.2.6.1 | TableatmfAddressTable | not-accessible | mandatory | A table implemented by the network-side IME, containing the ATM-layer addresses in effect on the user side of the UNI. |
| 1.3.6.1.4.1.353.2.6.1.1 | RowatmfAddressEntry | not-accessible | mandatory | Information about a single ATM-layer address in effect on the user-side IME. Note that the index variable atmAddressAtmAddress is a variable-length string, and… |
| 1.3.6.1.4.1.353.2.6.1.1.1 | ColumnatmfAddressPort | not-accessible | mandatory | A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI. |
| 1.3.6.1.4.1.353.2.6.1.1.2 | ColumnatmfAddressAtmAddress | not-accessible | mandatory | The ATM address which is in effect on the user side of the ATM UNI port. |
| 1.3.6.1.4.1.353.2.6.1.1.3 | ColumnatmfAddressStatus | read-write | mandatory | An indication of the validity of the ATM address at the user side of the UNI port. To configure a new address in this table, the user-side IME must set the app… |
| 1.3.6.1.4.1.353.2.6.1.1.4 | ColumnatmfAddressOrgScope | read-write | mandatory | This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indic… |
| 1.3.6.1.4.1.353.2.7 | NodeatmfNetPrefixGroup | |||
| 1.3.6.1.4.1.353.2.8 | NodeatmfSrvcRegistryGroup | |||
| 1.3.6.1.4.1.353.2.8.1 | TableatmfSrvcRegTable | not-accessible | mandatory | The table implemented by the IME on the network side of the ATM UNI port contains all of the services that are available to the user-side IME indexed by servic… |
| 1.3.6.1.4.1.353.2.8.1.1 | RowatmfSrvcRegEntry | not-accessible | mandatory | Information about a single service provider that is available to the user-side IME. |
| 1.3.6.1.4.1.353.2.8.1.1.1 | ColumnatmfSrvcRegPort | not-accessible | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.8.1.1.2 | ColumnatmfSrvcRegServiceID | not-accessible | mandatory | This is the service identifier which uniquely identifies the type of service at the address provided in the table. |
| 1.3.6.1.4.1.353.2.8.1.1.3 | ColumnatmfSrvcRegATMAddress | read-only | mandatory | This is the full address of the service. The user-side IME may use this address to establish a connection with the service. |
| 1.3.6.1.4.1.353.2.8.1.1.4 | ColumnatmfSrvcRegAddressIndex | not-accessible | mandatory | An arbitrary integer to differentiate multiple rows containing different ATM addresses for the same service on the same port. |
| 1.3.6.1.4.1.353.2.8.1.1.5 | ColumnatmfSrvcRegParm1 | read-only | mandatory | An octet string whose size and meaning is determined by the value of atmfSrvcRegServiceID. |
| 1.3.6.1.4.1.353.2.9 | NodeatmfVpcAbrGroup | |||
| 1.3.6.1.4.1.353.2.9.1 | TableatmfVpcAbrTable | not-accessible | mandatory | A table of operational parameters related to the ABR virtual path connections which cross this ATM Interface. There is one entry in this table for each ABR vir… |
| 1.3.6.1.4.1.353.2.9.1.1 | RowatmfVpcAbrEntry | not-accessible | mandatory | An entry in the table, containing information about a particular ABR virtual path connection. |
| 1.3.6.1.4.1.353.2.9.1.1.1 | ColumnatmfVpcAbrPortIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.9.1.1.2 | ColumnatmfVpcAbrVpi | read-only | mandatory | The VPI value of this ABR Virtual Path Connection at the local ATM Interface. |
| 1.3.6.1.4.1.353.2.9.1.1.3 | ColumnatmfVpcAbrTransmitIcr | read-only | mandatory | Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be la… |
| 1.3.6.1.4.1.353.2.9.1.1.4 | ColumnatmfVpcAbrTransmitNrm | read-only | mandatory | The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5). |
| 1.3.6.1.4.1.353.2.9.1.1.5 | ColumnatmfVpcAbrTransmitTrm | read-only | mandatory | Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8). |
| 1.3.6.1.4.1.353.2.9.1.1.6 | ColumnatmfVpcAbrTransmitCdf | read-only | mandatory | Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. … |
| 1.3.6.1.4.1.353.2.9.1.1.7 | ColumnatmfVpcAbrTransmitRif | read-only | mandatory | Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate… |
| 1.3.6.1.4.1.353.2.9.1.1.8 | ColumnatmfVpcAbrTransmitRdf | read-only | mandatory | Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The d… |
| 1.3.6.1.4.1.353.2.9.1.1.9 | ColumnatmfVpcAbrTransmitAdtf | read-only | mandatory | ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit… |
| 1.3.6.1.4.1.353.2.9.1.1.10 | ColumnatmfVpcAbrTransmitCrm | read-only | mandatory | RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. |
| 1.3.6.1.4.1.353.2.10 | NodeatmfVccAbrGroup | |||
| 1.3.6.1.4.1.353.2.10.1 | TableatmfVccAbrTable | not-accessible | mandatory | A table of operational parameters related to the ABR virtual channel connections which cross this ATM Interface. There is one entry in this table for each ABR … |
| 1.3.6.1.4.1.353.2.10.1.1 | RowatmfVccAbrEntry | not-accessible | mandatory | An entry in the table, containing information about a particular ABR virtual channel connection. |
| 1.3.6.1.4.1.353.2.10.1.1.1 | ColumnatmfVccAbrPortIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.10.1.1.2 | ColumnatmfVccAbrVpi | read-only | mandatory | The VPI value of this ABR Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no mean… |
| 1.3.6.1.4.1.353.2.10.1.1.3 | ColumnatmfVccAbrVci | read-only | mandatory | The VCI value of this ABR Virtual Channel Connection at the local ATM Interface. |
| 1.3.6.1.4.1.353.2.10.1.1.4 | ColumnatmfVccAbrTransmitIcr | read-only | mandatory | Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be la… |
| 1.3.6.1.4.1.353.2.10.1.1.5 | ColumnatmfVccAbrTransmitNrm | read-only | mandatory | The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5). |
| 1.3.6.1.4.1.353.2.10.1.1.6 | ColumnatmfVccAbrTransmitTrm | read-only | mandatory | Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8). |
| 1.3.6.1.4.1.353.2.10.1.1.7 | ColumnatmfVccAbrTransmitCdf | read-only | mandatory | Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. … |
| 1.3.6.1.4.1.353.2.10.1.1.8 | ColumnatmfVccAbrTransmitRif | read-only | mandatory | Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate… |
| 1.3.6.1.4.1.353.2.10.1.1.9 | ColumnatmfVccAbrTransmitRdf | read-only | mandatory | Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The d… |
| 1.3.6.1.4.1.353.2.10.1.1.10 | ColumnatmfVccAbrTransmitAdtf | read-only | mandatory | ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit… |
| 1.3.6.1.4.1.353.2.10.1.1.11 | ColumnatmfVccAbrTransmitCrm | read-only | mandatory | RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. |
| 1.3.6.1.4.1.353.2.11 | NodeatmfAddressRegistrationAdminGroup | |||
| 1.3.6.1.4.1.353.2.11.1 | TableatmfAddressRegistrationAdminTable | not-accessible | mandatory | A table of Address Registration administrative information for the ATM Interface. |
| 1.3.6.1.4.1.353.2.11.1.1 | RowatmfAddressRegistrationAdminEntry | not-accessible | mandatory | An entry in the table, containing Address Registration administrative information for the ATM Interface. |
| 1.3.6.1.4.1.353.2.11.1.1.1 | ColumnatmfAddressRegistrationAdminIndex | read-only | mandatory | The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. |
| 1.3.6.1.4.1.353.2.11.1.1.2 | ColumnatmfAddressRegistrationAdminStatus | read-only | mandatory | An indication of whether or not Address Registration is supported on this ATM Interface. Supported(1) indicates that this ATM Interface supports address regist… |