MIB Viewer

ATM-FORUM-M4-MIB

279 objects
This MIB module is the SNMP version of the ATM Forum's M4 interface (network element view).
Imported Objects
ATM-FORUM-TC-MIBatmForum
ATM-MIBatmVcCrossConnectEntry atmVcCrossConnectHighIfIndex atmVcCrossConnectHighVci atmVcCrossConnectHighVpi atmVcCrossConnectIndex atmVcCrossConnectLowIfIndex atmVcCrossConnectLowVci atmVcCrossConnectLowVpi atmVclEntry atmVclVci atmVclVpi atmVpCrossConnectEntry atmVpCrossConnectHighIfIndex atmVpCrossConnectHighVpi atmVpCrossConnectIndex atmVpCrossConnectLowIfIndex atmVpCrossConnectLowVpi atmVplEntry atmVplVpi
ENTITY-MIBentPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalParentRelPos
HOST-RESOURCES-MIBhrSWInstalledIndex hrSWInstalledName
IF-MIBifIndex OwnerString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCAutonomousType DateAndTime DisplayString RowPointer RowStatus TestAndIncr TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.353.100IdentityatmfM4MIBThis MIB module is the SNMP version of the ATM Forum's M4 interface (network element view).
1.3.6.1.4.1.353.100.1NodeatmfM4MIBObjects
1.3.6.1.4.1.353.100.1.1ScalaratmfM4NeVendorread-onlycurrentThe vendor of the ATM network element.
1.3.6.1.4.1.353.100.1.2ScalaratmfM4NeVersionread-onlycurrentThe version of the ATM network element.
1.3.6.1.4.1.353.100.1.3ScalaratmfM4NeStartTimeread-onlycurrentThe time at which the agent was last started; in other words, the time at which sysUpTime was zero.
1.3.6.1.4.1.353.100.1.4ScalaratmfM4NeAlarmSeverityIndexread-writecurrentAn index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for the ATM network element.
1.3.6.1.4.1.353.100.1.5ScalaratmfM4NeSuppressZeroStatsread-writecurrentWhen the value of this object is true, no entry will be created in any of the the historical statistics tables for intervals in which all counts are zero.
1.3.6.1.4.1.353.100.1.6TableatmfM4PhysPathTpTablenot-accessiblecurrentThe ATM Forum M4 interface Configuration table extensions for the physical path termination point.
1.3.6.1.4.1.353.100.1.6.1RowatmfM4PhysPathTpEntrynot-accessiblecurrentColumns conceptually added to the interface table entry for an ATM interface to model the physical path termination point. The row of the interface table model…
1.3.6.1.4.1.353.100.1.6.1.1ColumnatmfM4PhysPathTpHwUnitIndexread-onlycurrentSpecifies the index of the entry in the entPhysicalTable that represents the device (i.e., card) on which the physical path terminates.
1.3.6.1.4.1.353.100.1.6.1.2ColumnatmfM4PhysPathTpPortIDread-onlycurrentIdentifies the port (within the card identified by the hardware unit index) on which the physical path terminates.
1.3.6.1.4.1.353.100.1.6.1.3ColumnatmfM4PhysPathTpAlarmSeverityIndexread-writecurrentSpecifies the index of the entry in the communications alarm severity profile table that should be used.
1.3.6.1.4.1.353.100.1.7TableatmfM4TcAdaptorTablenot-accessiblecurrentThe ATM Forum M4 interface Configuration table extensions for the TC Adaptor.
1.3.6.1.4.1.353.100.1.7.1RowatmfM4TcAdaptorEntrynot-accessiblecurrentColumns conceptually added to the interface table entry for an ATM interface to model the TC Adaptor. The row of the interface table modeling this object shoul…
1.3.6.1.4.1.353.100.1.7.1.1ColumnatmfM4TcACellScramblingread-writecurrentThis attribute is used by the management system to activate and deactivate the ATM cell scrambling function. When the value of this attribute is TRUE, cell scr…
1.3.6.1.4.1.353.100.1.7.1.2ColumnatmfM4TcAlarmSeverityIndexread-writecurrentSpecifies the index of the entry in the communications alarm severity profile table that should be used.
1.3.6.1.4.1.353.100.1.8TableatmfM4AtmLayerTablenot-accessiblecurrentThe ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
1.3.6.1.4.1.353.100.1.8.1RowatmfM4AtmLayerEntrynot-accessiblecurrentColumns conceptually added to the interface table entry for an ATM interface to model the ATM cell layer. The row of the interface table modeling this object s…
1.3.6.1.4.1.353.100.1.8.1.1ColumnatmfM4IfTyperead-writecurrentSpecifies the type of ATM cell-layer interface defined on the physical path termination point modeled by this entry in the interface table.
1.3.6.1.4.1.353.100.1.8.1.2ColumnatmfM4IfLoopbackLocationCoderead-writecurrentSpecifies the code that shall exist in incoming OAM Loopback cells that are to be looped back at this interface. A value of zero shall indicate that the manage…
1.3.6.1.4.1.353.100.1.8.1.3ColumnatmfM4IfSubscriberAddressread-writecurrentSpecifies the address or newline-delimited list of addresses assigned to the UNI. This object shall be present only for table entries that represent an UNI int…
1.3.6.1.4.1.353.100.1.8.1.4ColumnatmfM4IfPreferredCarrierread-writecurrentSpecifies the name of the default carrier to use when one is not explicitly identified in the call set-up message. This object shall be present only for table …
1.3.6.1.4.1.353.100.1.8.1.5ColumnatmfM4IfFarEndCarrierNetworkread-writecurrentSpecifies the adjacent carrier to which the B-ICI transmission path is connected. This object shall be present only for table entries that represent an B-ICI i…
1.3.6.1.4.1.353.100.1.9TableatmfM4VplTablenot-accessiblecurrentThe ATM Forum M4 VPL Termination Point Configuration table extensions. This table augments the VPL configuration table in RFC 1695.
1.3.6.1.4.1.353.100.1.9.1RowatmfM4VplEntrynot-accessiblecurrentAdditional columns for the VPL configuration table entry.
1.3.6.1.4.1.353.100.1.9.1.1ColumnatmfM4VplSegEndPtread-createcurrentSpecifies whether the VPL termination point is a segment end-point.
1.3.6.1.4.1.353.100.1.10TableatmfM4VclTablenot-accessiblecurrentThe ATM Forum M4 VCL Termination Point Configuration table extensions. This table augments the VCL configuration table in RFC 1695.
1.3.6.1.4.1.353.100.1.10.1RowatmfM4VclEntrynot-accessiblecurrentAdditional columns for the VCL configuration table entry.
1.3.6.1.4.1.353.100.1.10.1.1ColumnatmfM4VclSegEndPtread-createcurrentSpecifies whether the VCL termination point is a segment end-point.
1.3.6.1.4.1.353.100.1.11TableatmfM4VpXConnTablenot-accessiblecurrentThe ATM Forum M4 VP Cross-Connect Configuration table extensions. This table augments the VP Cross-Connect configuration table in RFC 1695.
1.3.6.1.4.1.353.100.1.11.1RowatmfM4VpXConnEntrynot-accessiblecurrentAdditional columns for the VP Cross-Connect table entry.
1.3.6.1.4.1.353.100.1.11.1.1ColumnatmfM4VpXConnRecoverread-createcurrentIf FALSE, this cross-connection will be removed on failure.
1.3.6.1.4.1.353.100.1.12TableatmfM4VcXConnTablenot-accessiblecurrentThe ATM Forum M4 VC Cross-Connect Configuration table extensions. This table augments the VC Cross-Connect configuration table in RFC 1695.
1.3.6.1.4.1.353.100.1.12.1RowatmfM4VcXConnEntrynot-accessiblecurrentAdditional columns for the VC Cross-Connect table entry.
1.3.6.1.4.1.353.100.1.12.1.1ColumnatmfM4VcXConnRecoverread-createcurrentIf FALSE, this cross-connection will be removed on failure.
1.3.6.1.4.1.353.100.1.13TableatmfM4VpNextVpiTablenot-accessiblecurrentThe ATM Forum M4 VP Next-VPI value table. This optional table supplied unused VPI values for use in creating entries in the atmVplTable.
1.3.6.1.4.1.353.100.1.13.1RowatmfM4VpNextVpiEntrynot-accessiblecurrentEach entry in this table represents the 'next' VPI value available for a given ATM interface. Each ATM interface (UNI, BICI, BISSI) automatically has an entry …
1.3.6.1.4.1.353.100.1.13.1.1ColumnatmfM4VpNextVpiValueread-onlycurrentThis object contains an appropriate value to be used for atmVplVpi when creating entries in the atmVplTable. The value -1 indicates that no unassigned entries …
1.3.6.1.4.1.353.100.1.14TableatmfM4VcNextVciTablenot-accessiblecurrentThe ATM Forum M4 VC Next-VCI value table. This optional table supplied unused VCI values for use in creating entries in the atmVclTable.
1.3.6.1.4.1.353.100.1.14.1RowatmfM4VcNextVciEntrynot-accessiblecurrentEach entry in this table represents the 'next' VCI value available for a given ATM interface. Each VPL Termination Point automatically has an entry in this tab…
1.3.6.1.4.1.353.100.1.14.1.1ColumnatmfM4VcNextVciValueread-onlycurrentThis object contains an appropriate value to be used for atmVclVci when creating entries in the atmVclTable. The value -1 indicates that no unassigned entries …
1.3.6.1.4.1.353.100.1.15TableatmfM4CellProtoCurrTablenot-accessiblecurrentThe ATM Forum M4 Cell Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being col…
1.3.6.1.4.1.353.100.1.15.1RowatmfM4CellProtoCurrEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Cell Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associ…
1.3.6.1.4.1.353.100.1.15.1.1ColumnatmfM4CellProtoCurrSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.15.1.2ColumnatmfM4CellProtoCurrElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.15.1.3ColumnatmfM4CellProtoCurrSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with…
1.3.6.1.4.1.353.100.1.15.1.4ColumnatmfM4CellProtoCurrProtoErrorsread-onlycurrentThe number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval.
1.3.6.1.4.1.353.100.1.15.1.5ColumnatmfM4CellProtoCurrInOAMCellsread-onlycurrentThe number of OAM cells received at this interface since the start of this interval.
1.3.6.1.4.1.353.100.1.16TableatmfM4CellProtoHistTablenot-accessiblecurrentThe ATM Forum M4 Cell Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.100.1.16.1RowatmfM4CellProtoHistEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Cell Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associ…
1.3.6.1.4.1.353.100.1.16.1.1ColumnatmfM4CellProtoHistIndexnot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most …
1.3.6.1.4.1.353.100.1.16.1.2ColumnatmfM4CellProtoHistSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.16.1.3ColumnatmfM4CellProtoHistElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.16.1.4ColumnatmfM4CellProtoHistSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with…
1.3.6.1.4.1.353.100.1.16.1.5ColumnatmfM4CellProtoHistProtoErrorsread-onlycurrentThe number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval.
1.3.6.1.4.1.353.100.1.16.1.6ColumnatmfM4CellProtoHistInOAMCellsread-onlycurrentThe number of OAM cells received at this interface since the start of this interval.
1.3.6.1.4.1.353.100.1.17TableatmfM4CellProtoErrorTablenot-accessiblecurrentThe ATM Forum M4 Cell Protocol Monitoring Error Log table. This table maintains a record of the last error of each type encountered on each interface, as a res…
1.3.6.1.4.1.353.100.1.17.1RowatmfM4CellProtoErrorEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Cell Protocol Monitoring Error Log table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associate…
1.3.6.1.4.1.353.100.1.17.1.1ColumnatmfM4CellProtoErrorCodenot-accessiblecurrentIndicates the type of error for which this entry contains information.
1.3.6.1.4.1.353.100.1.17.1.2ColumnatmfM4CellProtoErrorTimeread-onlycurrentValue of sysUpTime when the error occurred.
1.3.6.1.4.1.353.100.1.17.1.3ColumnatmfM4CellProtoErrorReasonread-onlycurrentThe cell header abnormality type: the reason for discarding the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI value out of range.
1.3.6.1.4.1.353.100.1.17.1.4ColumnatmfM4CellProtoErrorVpiread-onlycurrentThe VPI value of the discarded cell.
1.3.6.1.4.1.353.100.1.17.1.5ColumnatmfM4CellProtoErrorVciread-onlycurrentThe VCI value of the discarded cell.
1.3.6.1.4.1.353.100.1.18TableatmfM4TcProtoCurrTablenot-accessiblecurrentThe ATM Forum M4 TC Adaptor Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently bei…
1.3.6.1.4.1.353.100.1.18.1RowatmfM4TcProtoCurrEntrynot-accessiblecurrentAn entry in the ATM Forum M4 TC Adaptor Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table …
1.3.6.1.4.1.353.100.1.18.1.1ColumnatmfM4TcProtoCurrSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.18.1.2ColumnatmfM4TcProtoCurrElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.18.1.3ColumnatmfM4TcProtoCurrSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing ATM TC Adaptor Protocol Monitoring History Data entry creation when the current interval terminate…
1.3.6.1.4.1.353.100.1.18.1.4ColumnatmfM4TcProtoCurrDiscardHECViolread-onlycurrentThe number of ATM cells discarded on this interface, due to an HEC violation, since the start of this interval.
1.3.6.1.4.1.353.100.1.19TableatmfM4TcProtoHistTablenot-accessiblecurrentThe ATM Forum M4 TC Adaptor Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals.
1.3.6.1.4.1.353.100.1.19.1RowatmfM4TcProtoHistEntrynot-accessiblecurrentAn entry in the ATM Forum M4 TC Adaptor Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table …
1.3.6.1.4.1.353.100.1.19.1.1ColumnatmfM4TcProtoHistIndexnot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most …
1.3.6.1.4.1.353.100.1.19.1.2ColumnatmfM4TcProtoHistSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.19.1.3ColumnatmfM4TcProtoHistElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.19.1.4ColumnatmfM4TcProtoHistSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with…
1.3.6.1.4.1.353.100.1.19.1.5ColumnatmfM4TcProtoHistDiscardHECViolread-onlycurrentThe number of ATM cells discarded on this interface, due to an HEC violation, since the start of this interval.
1.3.6.1.4.1.353.100.1.20TableatmfM4VpUpcNpcCurrTablenot-accessiblecurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. This table maintains per-TP statistics for the fifteen-minute i…
1.3.6.1.4.1.353.100.1.20.1RowatmfM4VpUpcNpcCurrEntrynot-accessiblecurrentAn entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. Each VPL Termination Point automatically has an ent…
1.3.6.1.4.1.353.100.1.20.1.1ColumnatmfM4VpUpcNpcCurrSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.20.1.2ColumnatmfM4VpUpcNpcCurrElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.20.1.3ColumnatmfM4VpUpcNpcCurrSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w…
1.3.6.1.4.1.353.100.1.20.1.4ColumnatmfM4VpUpcNpcCurrDiscardedCellsread-onlycurrentThe number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.20.1.5ColumnatmfM4VpUpcNpcCurrDiscardedClp0read-onlycurrentThe number of discarded cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.20.1.6ColumnatmfM4VpUpcNpcCurrPassedCellsread-onlycurrentThe number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.20.1.7ColumnatmfM4VpUpcNpcCurrPassedClp0read-onlycurrentThe number of cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.21TableatmfM4VpUpcNpcHistTablenot-accessiblecurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. This table maintains per-interface statistics for previous fift…
1.3.6.1.4.1.353.100.1.21.1RowatmfM4VpUpcNpcHistEntrynot-accessiblecurrentAn entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. Each VPL Termination Point automatically has an ent…
1.3.6.1.4.1.353.100.1.21.1.1ColumnatmfM4VpUpcNpcHistIndexnot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most …
1.3.6.1.4.1.353.100.1.21.1.2ColumnatmfM4VpUpcNpcHistSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.21.1.3ColumnatmfM4VpUpcNpcHistElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.21.1.4ColumnatmfM4VpUpcNpcHistSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w…
1.3.6.1.4.1.353.100.1.21.1.5ColumnatmfM4VpUpcNpcHistDiscardedCellsread-onlycurrentThe number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.21.1.6ColumnatmfM4VpUpcNpcHistDiscardedClp0read-onlycurrentThe number of discarded cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.21.1.7ColumnatmfM4VpUpcNpcHistPassedCellsread-onlycurrentThe number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.21.1.8ColumnatmfM4VpUpcNpcHistPassedClp0read-onlycurrentThe number of cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.22TableatmfM4VcUpcNpcCurrTablenot-accessiblecurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. This table maintains per-TP statistics for the fifteen-minute i…
1.3.6.1.4.1.353.100.1.22.1RowatmfM4VcUpcNpcCurrEntrynot-accessiblecurrentAn entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. Each VCL Termination Point automatically has an ent…
1.3.6.1.4.1.353.100.1.22.1.1ColumnatmfM4VcUpcNpcCurrSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.22.1.2ColumnatmfM4VcUpcNpcCurrElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.22.1.3ColumnatmfM4VcUpcNpcCurrSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w…
1.3.6.1.4.1.353.100.1.22.1.4ColumnatmfM4VcUpcNpcCurrDiscardedCellsread-onlycurrentThe number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.22.1.5ColumnatmfM4VcUpcNpcCurrDiscardedClp0read-onlycurrentThe number of discarded cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.22.1.6ColumnatmfM4VcUpcNpcCurrPassedCellsread-onlycurrentThe number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.22.1.7ColumnatmfM4VcUpcNpcCurrPassedClp0read-onlycurrentThe number of cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.23TableatmfM4VcUpcNpcHistTablenot-accessiblecurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. This table maintains per-interface statistics for previous fift…
1.3.6.1.4.1.353.100.1.23.1RowatmfM4VcUpcNpcHistEntrynot-accessiblecurrentAn entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. Each VCL Termination Point automatically has an ent…
1.3.6.1.4.1.353.100.1.23.1.1ColumnatmfM4VcUpcNpcHistIndexnot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most …
1.3.6.1.4.1.353.100.1.23.1.2ColumnatmfM4VcUpcNpcHistSuspectread-onlycurrentIf true, the statistics in this entry may be unreliable.
1.3.6.1.4.1.353.100.1.23.1.3ColumnatmfM4VcUpcNpcHistElapsedTimeread-onlycurrentAmount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.
1.3.6.1.4.1.353.100.1.23.1.4ColumnatmfM4VcUpcNpcHistSupprIntvlsread-onlycurrentThis attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w…
1.3.6.1.4.1.353.100.1.23.1.5ColumnatmfM4VcUpcNpcHistDiscardedCellsread-onlycurrentThe number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.23.1.6ColumnatmfM4VcUpcNpcHistDiscardedClp0read-onlycurrentThe number of discarded cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.23.1.7ColumnatmfM4VcUpcNpcHistPassedCellsread-onlycurrentThe number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.
1.3.6.1.4.1.353.100.1.23.1.8ColumnatmfM4VcUpcNpcHistPassedClp0read-onlycurrentThe number of cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.
1.3.6.1.4.1.353.100.1.24NodeatmfM4TestTypes
1.3.6.1.4.1.353.100.1.24.1IdentityatmfM4TestOAMLoopbackSegcurrentThis identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that…
1.3.6.1.4.1.353.100.1.24.2IdentityatmfM4TestOAMLoopbackE2EcurrentThis identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell.
1.3.6.1.4.1.353.100.1.25TableatmfM4VpTestTablenot-accessiblecurrentThe ATM Forum M4 VP Termination Point Test table. This table allows tests to be run on VPL and VPC termination points. The operation of this table is entirely …
1.3.6.1.4.1.353.100.1.25.1RowatmfM4VpTestEntrynot-accessiblecurrentAn entry containing objects for invoking tests on a VPL or VPC termination point.
1.3.6.1.4.1.353.100.1.25.1.1ColumnatmfM4VpTestObjectnot-accessiblecurrentSpecifies whether the test applies to the VPL termination point with the specified VPI, or the VPC termination point.
1.3.6.1.4.1.353.100.1.25.1.2ColumnatmfM4VpTestIdread-writecurrentThis object identifies the current invocation of the interface's test.
1.3.6.1.4.1.353.100.1.25.1.3ColumnatmfM4VpTestStatusread-writecurrentThis object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i…
1.3.6.1.4.1.353.100.1.25.1.5ColumnatmfM4VpTestResultread-onlycurrentThis object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this …
1.3.6.1.4.1.353.100.1.25.1.7ColumnatmfM4VpTestOwnerread-writecurrentThe entity which currently has the 'ownership' required to invoke a test on this interface.
1.3.6.1.4.1.353.100.1.26TableatmfM4VcTestTablenot-accessiblecurrentThe ATM Forum M4 VC Termination Point Test table. This table allows tests to be run on VCL and VCC termination points. The operation of this table is entirely …
1.3.6.1.4.1.353.100.1.26.1RowatmfM4VcTestEntrynot-accessiblecurrentAn entry containing objects for invoking tests on a VCL or VCC termination point.
1.3.6.1.4.1.353.100.1.26.1.1ColumnatmfM4VcTestObjectnot-accessiblecurrentSpecifies whether the test applies to the VCL termination point with the specified VPI and VCI values, or to the VCC termination point.
1.3.6.1.4.1.353.100.1.26.1.2ColumnatmfM4VcTestIdread-writecurrentThis object identifies the current invocation of the interface's test.
1.3.6.1.4.1.353.100.1.26.1.3ColumnatmfM4VcTestStatusread-writecurrentThis object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i…
1.3.6.1.4.1.353.100.1.26.1.5ColumnatmfM4VcTestResultread-onlycurrentThis object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this …
1.3.6.1.4.1.353.100.1.26.1.7ColumnatmfM4VcTestOwnerread-writecurrentThe entity which currently has the 'ownership' required to invoke a test on this termination point.
1.3.6.1.4.1.353.100.1.28TableatmfM4EquipTablenot-accessiblecurrentThe ATM Forum M4 Equipment table. This table augments the physical entity table.
1.3.6.1.4.1.353.100.1.28.1RowatmfM4EquipEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Equipment table. Each entry of this type represents a piece of equipment within the ATM NE that neither is nor accepts a replaceab…
1.3.6.1.4.1.353.100.1.28.1.1ColumnatmfM4EquipAdminStatusread-writecurrentUsed by the adminstrator to lock and unlock the object.
1.3.6.1.4.1.353.100.1.28.1.2ColumnatmfM4EquipLocationread-writecurrentThe specific or general location of the component.
1.3.6.1.4.1.353.100.1.28.1.3ColumnatmfM4EquipOperStatusread-onlycurrentThis attributes identifies whether or not the component is capable of performing its normal functions.
1.3.6.1.4.1.353.100.1.28.1.4ColumnatmfM4EquipVendorread-onlycurrentThe vendor of the component.
1.3.6.1.4.1.353.100.1.28.1.5ColumnatmfM4EquipVersionread-onlycurrentThe version of the component.
1.3.6.1.4.1.353.100.1.28.1.6ColumnatmfM4EquipUserLabelread-writecurrentA user-friendly name for the piece of equipment.
1.3.6.1.4.1.353.100.1.28.1.7ColumnatmfM4EquipAlarmSeverityIndexread-writecurrentAn index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component.
1.3.6.1.4.1.353.100.1.29TableatmfM4EquipHolderTablenot-accessiblecurrentThe ATM Forum M4 Equipment Holder table. This table augments the physical table.
1.3.6.1.4.1.353.100.1.29.1RowatmfM4EquipHolderEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Equipment Holder table. Each entry of this type represents a component within the ATM NE that accepts a replaceable plug-in unit.
1.3.6.1.4.1.353.100.1.29.1.1ColumnatmfM4EquipHolderTyperead-onlycurrentThe type of the component.
1.3.6.1.4.1.353.100.1.29.1.2ColumnatmfM4EquipHolderAcceptableTypesread-onlycurrentThe types of plug-in units that can be supported by the slot, separated by newline characters. This attribute shall be present only when the Equipment Holder r…
1.3.6.1.4.1.353.100.1.29.1.3ColumnatmfM4EquipHolderSlotStatusread-onlycurrentThis attributes identifies whether or not a plug-in unit is present in the slot. This attribute shall be present only when the Equipment Holder represents a sl…
1.3.6.1.4.1.353.100.1.29.1.4ColumnatmfM4EquipHolderSwLoadread-writecurrentAn index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is need…
1.3.6.1.4.1.353.100.1.30TableatmfM4PlugInUnitTablenot-accessiblecurrentThe ATM Forum M4 Plug-In Unittable. This table augments the physical entity table.
1.3.6.1.4.1.353.100.1.30.1RowatmfM4PlugInUnitEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Plug-In Unit table. Each entry of this type represents a piece of equipment within the ATM NE that is inserted into and removed fr…
1.3.6.1.4.1.353.100.1.30.1.1ColumnatmfM4PlugInUnitAdminStatusread-writecurrentUsed by the adminstrator to lock and unlock the object.
1.3.6.1.4.1.353.100.1.30.1.2ColumnatmfM4PlugInUnitAvailStatusread-onlycurrentProvides further information regarding the state of the component.
1.3.6.1.4.1.353.100.1.30.1.3ColumnatmfM4PlugInUnitOperStatusread-onlycurrentThis attributes identifies whether or not the component is capable of performing its normal functions.
1.3.6.1.4.1.353.100.1.30.1.4ColumnatmfM4PlugInUnitVendorread-onlycurrentThe vendor of the component.
1.3.6.1.4.1.353.100.1.30.1.5ColumnatmfM4PlugInUnitVersionread-onlycurrentThe version of the component.
1.3.6.1.4.1.353.100.1.30.1.6ColumnatmfM4PlugInUnitAlarmSeverityIndexread-writecurrentAn index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component.
1.3.6.1.4.1.353.100.1.32TableatmfM4HwRunningSwTablenot-accessiblecurrentThe ATM Forum M4 Hardware Unit/Running Software relationship. This table describes the software that is running on each hardware unit in the ATM NE.
1.3.6.1.4.1.353.100.1.32.1RowatmfM4HwRunningSwEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Hardware Unit/Running Software relationship table. Each entry of this type identifies an entry in the entPhysicalTable and one in …
1.3.6.1.4.1.353.100.1.32.1.1ColumnatmfM4HwRunningSwHwIndexnot-accessiblecurrentThe index, in the entPhysicalTable, of the containing hardware unit in this pair.
1.3.6.1.4.1.353.100.1.32.1.2ColumnatmfM4HwRunningSwIndexnot-accessiblecurrentA unique number within the context of the containing hardware unit.
1.3.6.1.4.1.353.100.1.32.1.3ColumnatmfM4HwRunningSwSwIndexread-onlycurrentThe index, in the hrRunningSwTable, of the software product represented by this entry.
1.3.6.1.4.1.353.100.1.33TableatmfM4HwInstalledSwTablenot-accessiblecurrentThe ATM Forum M4 Hardware Unit/Installed Software relationship. This table describes the software that is Installed on each hardware unit in the ATM NE.
1.3.6.1.4.1.353.100.1.33.1RowatmfM4HwInstalledSwEntrynot-accessiblecurrentAn entry in the ATM Forum M4 Hardware Unit/Installed Software relationship table. Each entry of this type identifies an entry in the physical entity table and …
1.3.6.1.4.1.353.100.1.33.1.1ColumnatmfM4HwInstalledSwHwIndexnot-accessiblecurrentThe index, in the entPhysical table, of the containing physical entity in this pair.
1.3.6.1.4.1.353.100.1.33.1.2ColumnatmfM4HwInstalledSwIndexread-onlycurrentA unique number within the context of the containing hardware unit.
1.3.6.1.4.1.353.100.1.33.1.3ColumnatmfM4HwInstalledSwSwIndexread-onlycurrentThe index, in the hrInstalledSwTable, of the software product represented by this entry.
1.3.6.1.4.1.353.100.1.33.1.4ColumnatmfM4HwSwAlarmSeverityIndexread-writecurrentAn index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this piece of software installed on the hardware…
1.3.6.1.4.1.353.100.1.34ScalaratmfM4AlarmSevDefaultread-writecurrentThe default severity value used for new profile index/trap ID pairs that have not yet been modified. This value is also used whenever an object's alarm severit…
1.3.6.1.4.1.353.100.1.35ScalaratmfM4AlarmSevProfileIndexNextread-onlycurrentThis object contains an appropriate value to be used for atmfM4AlarmSevProfileIndex when creating entries in the atmfM4AlarmSevProfileTable. The value -1 indic…
1.3.6.1.4.1.353.100.1.36TableatmfM4AlarmSevProfileTablenot-accessiblecurrentThe ATM Forum M4 alarm severity profile table. This table specifies which profiles exist. Creating or deleting an entry in this table automatically creates or …
1.3.6.1.4.1.353.100.1.36.1RowatmfM4AlarmSevProfileEntrynot-accessiblecurrentA group of severities, one for each alarm type in the communications alarm group.
1.3.6.1.4.1.353.100.1.36.1.1ColumnatmfM4AlarmSevProfileIndexnot-accessiblecurrentA number identifying this alarm severity profile.
1.3.6.1.4.1.353.100.1.36.1.2ColumnatmfM4AlarmSevProfileRowStatusread-createcurrentThis object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.100.1.37TableatmfM4AlarmSevTablenot-accessiblecurrentThe ATM Forum M4 alarm severity table. This table associates profile index and trap ID pairs with severities to be used for M4 alarm traps that have occurred. …
1.3.6.1.4.1.353.100.1.37.1RowatmfM4AlarmSevEntrynot-accessiblecurrentAn entry in this table associates an alarm severity profile index/trap ID pair with a severity. Deleting a particular profile's row in the alarm severity profi…
1.3.6.1.4.1.353.100.1.37.1.1ColumnatmfM4AlarmSevTrapIdnot-accessiblecurrentThe ID of the trap type to which this entry applies.
1.3.6.1.4.1.353.100.1.37.1.2ColumnatmfM4AlarmSeverityread-createcurrentThe severity to be used for this trap type when the is selected. If no value for this object has ever been set since the corresponding profile was created, the…
1.3.6.1.4.1.353.100.1.38IdentityatmfM4ForwardAllTrapscurrentThis is used as the value of the object atmfM4ForwardedTrapObject when traps from all objects are to be forwarded, or when there is only one object of the type…
1.3.6.1.4.1.353.100.1.39TableatmfM4TrapForwardingTablenot-accessiblecurrentThe ATM Forum M4 Trap forwarding discriminator table. This table specifies which traps will be sent to which management system.
1.3.6.1.4.1.353.100.1.39.1RowatmfM4TrapForwardingEntrynot-accessiblecurrentInformation about a group of traps to be sent to a particular IP address. A new entry must have values for all attributes that do not have default values befor…
1.3.6.1.4.1.353.100.1.39.1.1ColumnatmfM4TrapForwardingIndexnot-accessiblecurrentA unique number identifying the table entry.
1.3.6.1.4.1.353.100.1.39.1.2ColumnatmfM4TrapForwardingDestread-createcurrentThe IP address to which traps identified by this table entry should be sent.
1.3.6.1.4.1.353.100.1.39.1.3ColumnatmfM4ForwardedTrapIdread-createcurrentThe ID of the trap type to which this entry applies.
1.3.6.1.4.1.353.100.1.39.1.4ColumnatmfM4ForwardedTrapObjectread-createcurrentThe object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. The special value { 0 0 } indic…
1.3.6.1.4.1.353.100.1.39.1.5ColumnatmfM4TrapForwardingPortread-createcurrentThe UDP port on the specified management system to which traps identified by this entry should be sent.
1.3.6.1.4.1.353.100.1.39.1.6ColumnatmfM4LowestForwardedSeverityread-createcurrentThe lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type spe…
1.3.6.1.4.1.353.100.1.39.1.7ColumnatmfM4ForwardedIndeterminateread-createcurrentWhen this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified event. This object has significance only if the trap …
1.3.6.1.4.1.353.100.1.39.1.8ColumnatmfM4TrapForwardingRowStatusread-createcurrentThis object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.100.1.40TableatmfM4TrapLogTablenot-accessiblecurrentThe ATM Forum M4 Trap Agent log table. This table defines the trap logs currently maintained by the agent. The management system creates entries in this table …
1.3.6.1.4.1.353.100.1.40.1RowatmfM4TrapLogEntrynot-accessiblecurrentInformation about a single trap log.
1.3.6.1.4.1.353.100.1.40.1.1ColumnatmfM4TrapLogSrcnot-accessiblecurrentThe IP address of the SNMP agent whose traps are stored in this log.
1.3.6.1.4.1.353.100.1.40.1.2ColumnatmfM4TrapLogTypenot-accessiblecurrentThe type of traps stored in this log.
1.3.6.1.4.1.353.100.1.40.1.3ColumnatmfM4TrapLogAdminStatusread-createcurrentThe management system uses this object to stop and start the operations of this object.
1.3.6.1.4.1.353.100.1.40.1.4ColumnatmfM4TrapLogOperStatusread-onlycurrentIndicates whether or not the log is capable of performing its normal operations.
1.3.6.1.4.1.353.100.1.40.1.5ColumnatmfM4TrapLogFullActionread-createcurrentIndicates the action that should be performed when no more log entries can be created due to a log-full condition. If the value of this object is wrap(2), each…
1.3.6.1.4.1.353.100.1.40.1.6ColumnatmfM4TrapLogRowStatusread-createcurrentThis object is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.353.100.1.41TableatmfM4LoggedTrapTablenot-accessiblecurrentThe ATM Forum M4 Trap Agent logged trap table. This table is used to maintain the traps logged.
1.3.6.1.4.1.353.100.1.41.1RowatmfM4LoggedTrapEntrynot-accessiblecurrentInformation about a single trap in the log. Entries in this table are created automatically but can be deleted by the management system. Entries that represent…
1.3.6.1.4.1.353.100.1.41.1.1ColumnatmfM4LoggedTrapIndexnot-accessiblecurrentA unique number identifying this entry in the log. When the maximum value for this object has been reached, it will wrap around to 0.
1.3.6.1.4.1.353.100.1.41.1.2ColumnatmfM4LoggedTrapTimeread-onlycurrentThe time at which this trap was logged.
1.3.6.1.4.1.353.100.1.41.1.3ColumnatmfM4LoggedTrapIDread-onlycurrentThe type of trap to which this entry applies. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred.
1.3.6.1.4.1.353.100.1.41.1.4ColumnatmfM4LoggedTrapObjectread-onlycurrentThe object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. Together with the logged trap I…
1.3.6.1.4.1.353.100.1.41.1.5ColumnatmfM4LoggedTrapRowStatusread-writecurrentThis object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6).
1.3.6.1.4.1.353.100.1.42TableatmfM4LoggedAlarmTablenot-accessiblecurrentThe ATM Forum M4 Trap Agent logged alarm trap table. This table is used to maintain extra information for logged traps that represent alarm types.
1.3.6.1.4.1.353.100.1.42.1RowatmfM4LoggedAlarmEntrynot-accessiblecurrentInformation about the alarm-specific attributes of a single trap in the log.
1.3.6.1.4.1.353.100.1.42.1.1ColumnatmfM4LoggedAlarmSeverityread-onlycurrentThe perceived severity of the alarm, as specified by the agent that generated it.
1.3.6.1.4.1.353.100.1.42.1.2ColumnatmfM4LoggedAlarmBackedUpread-onlycurrentIf the value of this object is true, the agent reported in this trap that the failed object had been backed up. This object is only present if it was included …
1.3.6.1.4.1.353.100.1.42.1.3ColumnatmfM4LoggedAlarmBUObjectread-onlycurrentIndicates the object that provided back-up services to the failed object. This object is only present if it was included in the alarm trap corresponding to thi…
1.3.6.1.4.1.353.100.1.42.1.4ColumnatmfM4LoggedAlarmSpecificProbread-onlycurrentIndicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descripti…
1.3.6.1.4.1.353.100.1.42.1.5ColumnatmfM4LoggedAlarmRepairActread-onlycurrentIndicates proposed repair actions reported by the agent for the the problem identified by the alarm. If more than one action is described in this object, the p…
1.3.6.1.4.1.353.100.1.43ScalaratmfM4TrapAlarmSeverityaccessible-for-notifycurrentThe perceived severity of the alarm, as specified by the agent that generated it.
1.3.6.1.4.1.353.100.1.44ScalaratmfM4TrapAlarmBackedUpaccessible-for-notifycurrentIf the value of this object is true, the failed object has been backed up.
1.3.6.1.4.1.353.100.1.45ScalaratmfM4TrapAlarmBUObjectaccessible-for-notifycurrentIndicates the object that provided back-up services to the failed object.
1.3.6.1.4.1.353.100.1.46ScalaratmfM4TrapAlarmSpecificProbaccessible-for-notifycurrentIndicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descripti…
1.3.6.1.4.1.353.100.1.47ScalaratmfM4TrapAlarmRepairActaccessible-for-notifycurrentIndicates proposed repair actions reported by the agent for the the problem identified by the alarm. If more than one action is described in this object, the p…
1.3.6.1.4.1.353.100.2NodeatmfM4MIBTraps
1.3.6.1.4.1.353.100.2.1NotificationatmfM4IfAisAlarmcurrentIndicates that an AIS alarm condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.2NotificationatmfM4IfLcdAlarmcurrentIndicates that an LCD (Loss of Cell Delineation) condition has occurred on the TC Adatpr associated with the specified interface.
1.3.6.1.4.1.353.100.2.3NotificationatmfM4IfLofAlarmcurrentIndicates that an LOF (Loss of Frame) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.4NotificationatmfM4IfLopAlarmcurrentIndicates that an LOP (Loss of Pointer) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.5NotificationatmfM4IfLosAlarmcurrentIndicates that an LOS (Loss of Signal) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.6NotificationatmfM4IfPayloadMismatchAlarmcurrentIndicates that a payload type mismatch condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.7NotificationatmfM4IfXmissionErrAlarmcurrentIndicates that an transmission error condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.8NotificationatmfM4IfPathTraceMismatchAlarmcurrentIndicates that path trace mismatch condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.9NotificationatmfM4IfRdiAlarmcurrentIndicates that an RDI (Remote Defect Indication) condition has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.10NotificationatmfM4IfSignalLabelMismatchAlarmcurrentIndicates that a signal label mismatch has occurred on the physical path TP associated with the specified interface.
1.3.6.1.4.1.353.100.2.23NotificationatmfM4HwLineCardAlarmcurrentIndicates that a line-card problem condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the er…
1.3.6.1.4.1.353.100.2.25NotificationatmfM4HwPowerAlarmcurrentIndicates that a power problem alarm condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the …
1.3.6.1.4.1.353.100.2.29NotificationatmfM4HwPIUnitMissingAlarmcurrentIndicates that a plug-in unit missing condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the…
1.3.6.1.4.1.353.100.2.30NotificationatmfM4HwPIUnitProbAlarmcurrentIndicates that a plug-in unit problem condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the…
1.3.6.1.4.1.353.100.2.31NotificationatmfM4HwPIUnitMismatchAlarmcurrentIndicates that a plug-in unit type mismatch condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates th…
1.3.6.1.4.1.353.100.2.32NotificationatmfM4HwTimingProbAlarmcurrentIndicates that a timing problem alarm condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the…
1.3.6.1.4.1.353.100.2.39NotificationatmfM4HwSwDownloadFailAlarmcurrentIndicates that a software download failure has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the erro…
1.3.6.1.4.1.353.100.2.40NotificationatmfM4HwVersionMismatchAlarmcurrentIndicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the err…
1.3.6.1.4.1.353.100.2.41NotificationatmfM4HwFanFailAlarmcurrentIndicates that a cooling fan failure condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the …
1.3.6.1.4.1.353.100.2.44NotificationatmfM4HwHighTempAlarmcurrentIndicates that a high temperature condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the err…
1.3.6.1.4.1.353.100.2.45NotificationatmfM4SwVersionMismatchAlarmcurrentIndicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. A hardware index of 0 indicates that the err…
1.3.6.1.4.1.353.100.2.54NotificationatmfM4HwUnitUpcurrentIndicates that the operational state of the specified hardware unit has transitioned to 'up'.
1.3.6.1.4.1.353.100.2.55NotificationatmfM4HwUnitDowncurrentIndicates that the operational state of the specified hardware unit has transitioned to 'down'.
1.3.6.1.4.1.353.100.2.56NotificationatmfM4AtmCellIfCreatedcurrentIndicates that an ATM cell layer interface has just been created on the interface.
1.3.6.1.4.1.353.100.2.57NotificationatmfM4AtmCellIfDeletedcurrentIndicates that the ATM cell layer interface has just been deleted.
1.3.6.1.4.1.353.100.2.66NotificationatmfM4HwUnitCreatedcurrentIndicates that the specified hardware unit has been installed at the specified location.
1.3.6.1.4.1.353.100.2.67NotificationatmfM4HwUnitDeletedcurrentIndicates that the specified hardware unit has been removed or de-instaleld from the specified location.
1.3.6.1.4.1.353.100.2.70NotificationatmfM4IfChangedcurrentIndicates that the configuration of the interface has been changed.
1.3.6.1.4.1.353.100.3NodeatmfM4MIBCompliance
1.3.6.1.4.1.353.100.3.1NodeatmfM4Groups
1.3.6.1.4.1.353.100.3.1.1GroupatmfM4GeneralcurrentNE high level objects
1.3.6.1.4.1.353.100.3.1.2GroupatmfM4PhysPathTpGroupcurrentThe ATM Forum M4 interface Configuration table extensions for the physical path termination point
1.3.6.1.4.1.353.100.3.1.3GroupatmfM4TcAdaptorGroupcurrentThe ATM Forum M4 interface Configuration table extensions for the TC Adaptor.
1.3.6.1.4.1.353.100.3.1.4GroupatmfM4AtmLayerGroupcurrentThe ATM Forum M4 interface Configuration table extensions for the ATM cell layer.
1.3.6.1.4.1.353.100.3.1.5GroupatmfM4VplGroupcurrentThe ATM Forum M4 VPL Termination Point Configuration table extensions.
1.3.6.1.4.1.353.100.3.1.6GroupatmfM4VclGroupcurrentThe ATM Forum M4 VCL Termination Point Configuration table extensions.
1.3.6.1.4.1.353.100.3.1.7GroupatmfM4VpXConnGroupcurrentThe ATM Forum M4 VP Cross-Connect Configuration table extensions.
1.3.6.1.4.1.353.100.3.1.8GroupatmfM4VcXConnGroupcurrentThe ATM Forum M4 VC Cross-Connect Configuration table extensions.
1.3.6.1.4.1.353.100.3.1.9GroupatmfM4VpNextVpiGroupcurrentThe ATM Forum M4 VP Next-VPI value table.
1.3.6.1.4.1.353.100.3.1.10GroupatmfM4VcNextVciGroupcurrentThe ATM Forum M4 VC Next-VCI value table.
1.3.6.1.4.1.353.100.3.1.11GroupatmfM4CellProtoCurrGroupcurrentThe ATM Forum M4 Cell Protocol Monitoring Current Data table.
1.3.6.1.4.1.353.100.3.1.12GroupatmfM4CellProtoHistGroupcurrentThe ATM Forum M4 Cell Protocol Monitoring History Data table.
1.3.6.1.4.1.353.100.3.1.13GroupatmfM4CellProtoErrorGroupcurrentThe ATM Forum M4 Cell Protocol Monitoring Error Log table.
1.3.6.1.4.1.353.100.3.1.14GroupatmfM4TcProtoCurrGroupcurrentThe ATM Forum M4 TC Adaptor Protocol Monitoring Current Data table.
1.3.6.1.4.1.353.100.3.1.15GroupatmfM4TcProtoHistGroupcurrentThe ATM Forum M4 TC Adaptor Protocol Monitoring History Data table.
1.3.6.1.4.1.353.100.3.1.16GroupatmfM4VpUpcNpcCurrGroupcurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points.
1.3.6.1.4.1.353.100.3.1.17GroupatmfM4VpUpcNpcHistGroupcurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points.
1.3.6.1.4.1.353.100.3.1.18GroupatmfM4VcUpcNpcCurrGroupcurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points
1.3.6.1.4.1.353.100.3.1.19GroupatmfM4VcUpcNpcHistGroupcurrentThe ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points.
1.3.6.1.4.1.353.100.3.1.20GroupatmfM4VpTestGroupcurrentThe ATM Forum M4 VP Termination Point Test table.
1.3.6.1.4.1.353.100.3.1.21GroupatmfM4VcTestGroupcurrentThe ATM Forum M4 VC Termination Point Test table.
1.3.6.1.4.1.353.100.3.1.22GroupatmfM4EquipGroupcurrentThe ATM Forum M4 Equipment table.
1.3.6.1.4.1.353.100.3.1.23GroupatmfM4EquipHolderGroupcurrentThe ATM Forum M4 Equipment Holder table.
1.3.6.1.4.1.353.100.3.1.24GroupatmfM4PlugInUnitGroupcurrentThe ATM Forum M4 Plug-In Unit table.
1.3.6.1.4.1.353.100.3.1.25GroupatmfM4HwRunningSwGroupcurrentThe ATM Forum M4 Hardware Unit/Running Software table.
1.3.6.1.4.1.353.100.3.1.26GroupatmfM4HwInstalledSwGroupcurrentThe ATM Forum M4 Hardware Unit/Installed Software table
1.3.6.1.4.1.353.100.3.1.27GroupatmfM4AlarmSevGroupcurrentAlarm handling objects
1.3.6.1.4.1.353.100.3.1.28GroupatmfM4TrapForwardingGroupcurrentTrap forwarding table
1.3.6.1.4.1.353.100.3.1.29GroupatmfM4TrapLogGroupcurrentThe ATM Forum M4 Trap Agent log table.
1.3.6.1.4.1.353.100.3.1.30GroupatmfM4LoggedTrapGroupcurrentThe ATM Forum M4 Trap Agent logged trap table.
1.3.6.1.4.1.353.100.3.1.31GroupatmfM4LoggedAlarmGroupcurrentThe ATM Forum M4 Trap Agent logged alarm trap table.
1.3.6.1.4.1.353.100.3.2NodeatmfM4Compliances
1.3.6.1.4.1.353.100.3.2.1ComplianceatmfM4CompliancecurrentThe compliance statements are listed as a set up conformance units that correspond to each table. Support for all tables is mandatory.
Type Definitions
NameSyntaxStatusDescription
AtmfM4AlarmLogSeverityINTEGER { cleared(-1), indeterminate(0), critical(1), major(2), minor(3), warning(4) }currentThe value of this object identifies the severity of an alarm in the log, including 'cleared'.
AtmfM4AlarmSeverityINTEGER { indeterminate(0), critical(1), major(2), minor(3), warning(4) }currentThe value of this object identifies the severity of an alarm that has occurred. (Note that there is no value corresponding to 'cleared'.)
MIB Viewer