ATM-FORUM-SNMP-M4-MIB
333 objects
This MIB module is the SNMP version of the ATM Forum's M4 interface (network element view).
Imported Objects
| ATM-MIB | atmVcCrossConnectEntry atmVcCrossConnectH2LOperStatus atmVcCrossConnectL2HOperStatus atmVclEntry atmVclOperStatus atmVclVci atmVclVpi atmVpCrossConnectEntry atmVpCrossConnectH2LOperStatus atmVpCrossConnectL2HOperStatus atmVplEntry atmVplOperStatus atmVplVpi |
| ENTITY-MIB | entPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalParentRelPos |
| HOST-RESOURCES-MIB | hrSWInstalledIndex hrSWInstalledName |
| IF-MIB | ifIndex ifOperStatus OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType DateAndTime DisplayString RowPointer RowStatus TestAndIncr TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.1 | NodeatmfM4 | |||
| 1.3.6.1.4.1.353.5.1.3 | NodeatmfM4SnmpNEView | |||
| 1.3.6.1.4.1.353.5.1.3.1 | IdentityatmfM4MIB | This MIB module is the SNMP version of the ATM Forum's M4 interface (network element view). | ||
| 1.3.6.1.4.1.353.5.1.3.1.1 | NodeatmfM4MIBObjects | |||
| 1.3.6.1.4.1.353.5.1.3.1.1.1 | ScalaratmfM4NeVendor | read-only | current | The vendor of the ATM network element. |
| 1.3.6.1.4.1.353.5.1.3.1.1.2 | ScalaratmfM4NeVersion | read-only | current | The version of the ATM network element. |
| 1.3.6.1.4.1.353.5.1.3.1.1.3 | ScalaratmfM4NeStartTime | read-only | current | The time at which the agent was last started; in other words, the time at which sysUpTime was zero. |
| 1.3.6.1.4.1.353.5.1.3.1.1.4 | ScalaratmfM4NeAlarmSeverityIndex | read-write | current | An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for the ATM network element. The default value for t… |
| 1.3.6.1.4.1.353.5.1.3.1.1.5 | ScalaratmfM4NeSuppressZeroStats | read-write | current | When the value of this object is true, no entry will be created in any of the historical statistics tables for intervals in which all counts are zero. The defa… |
| 1.3.6.1.4.1.353.5.1.3.1.1.6 | TableatmfM4PhysPathTpTable | not-accessible | current | The ATM Forum M4 interface Configuration table extensions for the physical path termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.6.1 | RowatmfM4PhysPathTpEntry | not-accessible | current | Columns conceptually added to the interface table entry for an ATM interface to model the physical path termination point. The row of the interface table model… |
| 1.3.6.1.4.1.353.5.1.3.1.1.6.1.1 | ColumnatmfM4PhysPathTpHwUnitIndex | read-only | current | Specifies the index of the entry in the entPhysicalTable that represents the device (i.e., card) on which the physical path terminates. |
| 1.3.6.1.4.1.353.5.1.3.1.1.6.1.2 | ColumnatmfM4PhysPathTpPortID | read-only | current | Identifies the port (within the card identified by the hardware unit index) on which the physical path terminates. |
| 1.3.6.1.4.1.353.5.1.3.1.1.6.1.3 | ColumnatmfM4PhysPathTpAlarmSeverityIndex | read-write | current | Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero. |
| 1.3.6.1.4.1.353.5.1.3.1.1.7 | TableatmfM4TcAdapterTable | not-accessible | current | The ATM Forum M4 interface Configuration table extensions for the TC Adapter. |
| 1.3.6.1.4.1.353.5.1.3.1.1.7.1 | RowatmfM4TcAdapterEntry | not-accessible | current | Columns conceptually added to the interface table entry for an ATM interface to model the TC Adapter. The row of the interface table modeling this object shoul… |
| 1.3.6.1.4.1.353.5.1.3.1.1.7.1.1 | ColumnatmfM4TcACellScrambling | read-write | current | This attribute is used by the management system to activate and deactivate the ATM cell scrambling function. When the value of this attribute is TRUE, cell scr… |
| 1.3.6.1.4.1.353.5.1.3.1.1.7.1.2 | ColumnatmfM4TcAlarmSeverityIndex | read-write | current | Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero. |
| 1.3.6.1.4.1.353.5.1.3.1.1.8 | TableatmfM4AtmLayerTable | not-accessible | current | The ATM Forum M4 interface Configuration table extensions for the ATM cell layer. |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1 | RowatmfM4AtmLayerEntry | not-accessible | current | Columns conceptually added to the interface table entry for an ATM interface to model the ATM cell layer. The row of the interface table modeling this object s… |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1.1 | ColumnatmfM4IfType | read-write | current | Specifies the type of ATM cell layer interface defined on the physical path termination point modeled by this entry in the interface table. The default value o… |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1.2 | ColumnatmfM4IfLoopbackLocationCode | read-write | current | Specifies the code that shall exist in incoming OAM Loopback cells that are to be looped back at this interface. A value of zero shall indicate that the manage… |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1.3 | ColumnatmfM4IfSubscriberAddress | read-write | current | Specifies the address or newline-delimited list of addresses assigned to the UNI. This object shall be present only for table entries that represent a UNI inte… |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1.4 | ColumnatmfM4IfPreferredCarrier | read-write | current | Specifies the name of the default carrier to use when one is not explicitly identified in the call set-up message. This object shall be present only for table … |
| 1.3.6.1.4.1.353.5.1.3.1.1.8.1.5 | ColumnatmfM4IfFarEndCarrierNetwork | read-write | current | Specifies the adjacent carrier to which the B-ICI transmission path is connected. This object shall be present only for table entries that represent a B-ICI in… |
| 1.3.6.1.4.1.353.5.1.3.1.1.9 | TableatmfM4VplTable | not-accessible | current | The ATM Forum M4 VPL Termination Point Configuration table extensions. This table augments the VPL configuration table in RFC 1695. |
| 1.3.6.1.4.1.353.5.1.3.1.1.9.1 | RowatmfM4VplEntry | not-accessible | current | Additional columns for the VPL configuration table entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.9.1.1 | ColumnatmfM4VplSegEndPt | read-create | current | Specifies whether the VPL termination point is a segment end-point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.10 | TableatmfM4VclTable | not-accessible | current | The ATM Forum M4 VCL Termination Point Configuration table extensions. This table augments the VCL configuration table in RFC 1695. |
| 1.3.6.1.4.1.353.5.1.3.1.1.10.1 | RowatmfM4VclEntry | not-accessible | current | Additional columns for the VCL configuration table entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.10.1.1 | ColumnatmfM4VclSegEndPt | read-create | current | Specifies whether the VCL termination point is a segment end-point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.11 | TableatmfM4VpXConnTable | not-accessible | current | The ATM Forum M4 VP Cross-Connect Configuration table extensions. This table augments the VP Cross-Connect configuration table in RFC 1695. |
| 1.3.6.1.4.1.353.5.1.3.1.1.11.1 | RowatmfM4VpXConnEntry | not-accessible | current | Additional columns for the VP Cross-Connect table entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.11.1.1 | ColumnatmfM4VpXConnRecover | read-create | current | If FALSE, this cross-connection will be removed on failure. |
| 1.3.6.1.4.1.353.5.1.3.1.1.12 | TableatmfM4VcXConnTable | not-accessible | current | The ATM Forum M4 VC Cross-Connect Configuration table extensions. This table augments the VC Cross-Connect configuration table in RFC 1695. |
| 1.3.6.1.4.1.353.5.1.3.1.1.12.1 | RowatmfM4VcXConnEntry | not-accessible | current | Additional columns for the VC Cross-Connect table entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.12.1.1 | ColumnatmfM4VcXConnRecover | read-create | current | If FALSE, this cross-connection will be removed on failure. |
| 1.3.6.1.4.1.353.5.1.3.1.1.13 | TableatmfM4VpNextVpiTable | not-accessible | current | The ATM Forum M4 VP Next VPI value table. This optional table supplies unused VPI values for use in creating entries in the atmVplTable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.13.1 | RowatmfM4VpNextVpiEntry | not-accessible | current | Each entry in this table represents the 'next' VPI value available for a given ATM interface. Each ATM interface (UNI, BICI, BISSI) automatically has an entry … |
| 1.3.6.1.4.1.353.5.1.3.1.1.13.1.1 | ColumnatmfM4VpNextVpiValue | read-only | current | This object contains an appropriate value to be used for atmVplVpi when creating entries in the atmVplTable. The value -1 indicates that no unassigned entries … |
| 1.3.6.1.4.1.353.5.1.3.1.1.14 | TableatmfM4VcNextVciTable | not-accessible | current | The ATM Forum M4 VC Next VCI value table. This optional table supplies unused VCI values for use in creating entries in the atmVclTable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.14.1 | RowatmfM4VcNextVciEntry | not-accessible | current | Each entry in this table represents the 'next' VCI value available for a given ATM interface. Each VPL Termination Point automatically has an entry in this tab… |
| 1.3.6.1.4.1.353.5.1.3.1.1.14.1.1 | ColumnatmfM4VcNextVciValue | read-only | current | This object contains an appropriate value to be used for atmVclVci when creating entries in the atmVclTable. The value -1 indicates that no unassigned entries … |
| 1.3.6.1.4.1.353.5.1.3.1.1.15 | TableatmfM4CellProtoCurrTable | not-accessible | current | The ATM Forum M4 Cell Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently being col… |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1 | RowatmfM4CellProtoCurrEntry | not-accessible | current | An entry in the ATM Forum M4 Cell Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associ… |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1.1 | ColumnatmfM4CellProtoCurrSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1.2 | ColumnatmfM4CellProtoCurrElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1.3 | ColumnatmfM4CellProtoCurrSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with… |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1.4 | ColumnatmfM4CellProtoCurrProtoErrors | read-only | current | The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.15.1.5 | ColumnatmfM4CellProtoCurrInOAMCells | read-only | current | The number of OAM cells received at this interface since the start of this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.16 | TableatmfM4CellProtoHistTable | not-accessible | current | The ATM Forum M4 Cell Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals. |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1 | RowatmfM4CellProtoHistEntry | not-accessible | current | An entry in the ATM Forum M4 Cell Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associ… |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.1 | ColumnatmfM4CellProtoHistIndex | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most … |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.2 | ColumnatmfM4CellProtoHistSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.3 | ColumnatmfM4CellProtoHistElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.4 | ColumnatmfM4CellProtoHistSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with… |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.5 | ColumnatmfM4CellProtoHistProtoErrors | read-only | current | The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, during this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.16.1.6 | ColumnatmfM4CellProtoHistInOAMCells | read-only | current | The number of OAM cells received at this interface during this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.17 | TableatmfM4CellProtoErrorTable | not-accessible | current | The ATM Forum M4 Cell Protocol Monitoring Error Log table. This table maintains a record of the last error of each type encountered on each interface, as a res… |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1 | RowatmfM4CellProtoErrorEntry | not-accessible | current | An entry in the ATM Forum M4 Cell Protocol Monitoring Error Log table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table associate… |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1.1 | ColumnatmfM4CellProtoErrorCode | not-accessible | current | Indicates the type of error for which this entry contains information. The range and interpretation of this error code value is left up to the individual agent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1.2 | ColumnatmfM4CellProtoErrorTime | read-only | current | Value of sysUpTime when the error occurred. |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1.3 | ColumnatmfM4CellProtoErrorReason | read-only | current | The cell header abnormality type: the reason for discarding the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI value out of range). |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1.4 | ColumnatmfM4CellProtoErrorVpi | read-only | current | The VPI value of the discarded cell. |
| 1.3.6.1.4.1.353.5.1.3.1.1.17.1.5 | ColumnatmfM4CellProtoErrorVci | read-only | current | The VCI value of the discarded cell. |
| 1.3.6.1.4.1.353.5.1.3.1.1.18 | TableatmfM4TcProtoCurrTable | not-accessible | current | The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. This table maintains per-interface statistics for the fifteen-minute interval currently bei… |
| 1.3.6.1.4.1.353.5.1.3.1.1.18.1 | RowatmfM4TcProtoCurrEntry | not-accessible | current | An entry in the ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table … |
| 1.3.6.1.4.1.353.5.1.3.1.1.18.1.1 | ColumnatmfM4TcProtoCurrSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.18.1.2 | ColumnatmfM4TcProtoCurrElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.18.1.3 | ColumnatmfM4TcProtoCurrSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing ATM TC Adapter Protocol Monitoring History Data entry creation when the current interval terminate… |
| 1.3.6.1.4.1.353.5.1.3.1.1.18.1.4 | ColumnatmfM4TcProtoCurrDiscardHECViol | read-only | current | The number of ATM cells discarded on this interface, due to a HEC violation, since the start of this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.19 | TableatmfM4TcProtoHistTable | not-accessible | current | The ATM Forum M4 TC Adapter Protocol Monitoring History Data table. This table maintains per-interface statistics for previous fifteen-minute intervals. |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1 | RowatmfM4TcProtoHistEntry | not-accessible | current | An entry in the ATM Forum M4 TC Adapter Protocol Monitoring History Data table. Each ATM interface (UNI, BICI, BISSI) automatically has an entry in this table … |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1.1 | ColumnatmfM4TcProtoHistIndex | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most … |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1.2 | ColumnatmfM4TcProtoHistSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1.3 | ColumnatmfM4TcProtoHistElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1.4 | ColumnatmfM4TcProtoHistSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with… |
| 1.3.6.1.4.1.353.5.1.3.1.1.19.1.5 | ColumnatmfM4TcProtoHistDiscardHECViol | read-only | current | The number of ATM cells discarded on this interface, due to a HEC violation, during this interval. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20 | TableatmfM4VpUpcNpcCurrTable | not-accessible | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. This table maintains per-TP statistics for the fifteen-minute i… |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1 | RowatmfM4VpUpcNpcCurrEntry | not-accessible | current | An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. Each VPL Termination Point automatically has an ent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.1 | ColumnatmfM4VpUpcNpcCurrSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.2 | ColumnatmfM4VpUpcNpcCurrElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.3 | ColumnatmfM4VpUpcNpcCurrSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w… |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.4 | ColumnatmfM4VpUpcNpcCurrDiscardedCells | read-only | current | The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.5 | ColumnatmfM4VpUpcNpcCurrDiscardedClp0 | read-only | current | The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.6 | ColumnatmfM4VpUpcNpcCurrPassedCells | read-only | current | The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.20.1.7 | ColumnatmfM4VpUpcNpcCurrPassedClp0 | read-only | current | The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately po… |
| 1.3.6.1.4.1.353.5.1.3.1.1.21 | TableatmfM4VpUpcNpcHistTable | not-accessible | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. This table maintains per-interface statistics for previous fift… |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1 | RowatmfM4VpUpcNpcHistEntry | not-accessible | current | An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. Each VPL Termination Point automatically has an ent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.1 | ColumnatmfM4VpUpcNpcHistIndex | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most … |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.2 | ColumnatmfM4VpUpcNpcHistSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.3 | ColumnatmfM4VpUpcNpcHistElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.4 | ColumnatmfM4VpUpcNpcHistSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w… |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.5 | ColumnatmfM4VpUpcNpcHistDiscardedCells | read-only | current | The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.6 | ColumnatmfM4VpUpcNpcHistDiscardedClp0 | read-only | current | The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed. |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.7 | ColumnatmfM4VpUpcNpcHistPassedCells | read-only | current | The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.21.1.8 | ColumnatmfM4VpUpcNpcHistPassedClp0 | read-only | current | The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately po… |
| 1.3.6.1.4.1.353.5.1.3.1.1.22 | TableatmfM4VcUpcNpcCurrTable | not-accessible | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. This table maintains per-TP statistics for the fifteen-minute i… |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1 | RowatmfM4VcUpcNpcCurrEntry | not-accessible | current | An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. Each VCL Termination Point automatically has an ent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.1 | ColumnatmfM4VcUpcNpcCurrSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.2 | ColumnatmfM4VcUpcNpcCurrElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.3 | ColumnatmfM4VcUpcNpcCurrSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w… |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.4 | ColumnatmfM4VcUpcNpcCurrDiscardedCells | read-only | current | The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.5 | ColumnatmfM4VcUpcNpcCurrDiscardedClp0 | read-only | current | The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed. |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.6 | ColumnatmfM4VcUpcNpcCurrPassedCells | read-only | current | The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.22.1.7 | ColumnatmfM4VcUpcNpcCurrPassedClp0 | read-only | current | The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately po… |
| 1.3.6.1.4.1.353.5.1.3.1.1.23 | TableatmfM4VcUpcNpcHistTable | not-accessible | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. This table maintains per-interface statistics for previous fift… |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1 | RowatmfM4VcUpcNpcHistEntry | not-accessible | current | An entry in the ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. Each VCL Termination Point automatically has an ent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.1 | ColumnatmfM4VcUpcNpcHistIndex | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most … |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.2 | ColumnatmfM4VcUpcNpcHistSuspect | read-only | current | If true, the statistics in this entry may be unreliable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.3 | ColumnatmfM4VcUpcNpcHistElapsedTime | read-only | current | Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted. |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.4 | ColumnatmfM4VcUpcNpcHistSupprIntvls | read-only | current | This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates w… |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.5 | ColumnatmfM4VcUpcNpcHistDiscardedCells | read-only | current | The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.6 | ColumnatmfM4VcUpcNpcHistDiscardedClp0 | read-only | current | The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed. |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.7 | ColumnatmfM4VcUpcNpcHistPassedCells | read-only | current | The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing. |
| 1.3.6.1.4.1.353.5.1.3.1.1.23.1.8 | ColumnatmfM4VcUpcNpcHistPassedClp0 | read-only | current | The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately po… |
| 1.3.6.1.4.1.353.5.1.3.1.1.24 | NodeatmfM4TestTypes | |||
| 1.3.6.1.4.1.353.5.1.3.1.1.24.1 | IdentityatmfM4TestOAMLoopbackSeg | current | This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that… | |
| 1.3.6.1.4.1.353.5.1.3.1.1.24.2 | IdentityatmfM4TestOAMLoopbackE2E | current | This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell. | |
| 1.3.6.1.4.1.353.5.1.3.1.1.25 | TableatmfM4VpTestTable | not-accessible | current | The ATM Forum M4 VP Termination Point Test table. This table allows tests to be run on VPL and VPC termination points. The operation of this table is entirely … |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1 | RowatmfM4VpTestEntry | not-accessible | current | An entry containing objects for invoking tests on a VPL or VPC termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1.1 | ColumnatmfM4VpTestObject | not-accessible | current | Specifies whether the test applies to the VPL termination point with the specified VPI, or the VPC termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1.2 | ColumnatmfM4VpTestId | read-write | current | This object identifies the current invocation of the interface's test. |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1.3 | ColumnatmfM4VpTestStatus | read-write | current | This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i… |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1.5 | ColumnatmfM4VpTestResult | read-only | current | This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this … |
| 1.3.6.1.4.1.353.5.1.3.1.1.25.1.7 | ColumnatmfM4VpTestOwner | read-write | current | The entity which currently has the 'ownership' required to invoke a test on this interface. |
| 1.3.6.1.4.1.353.5.1.3.1.1.26 | TableatmfM4VcTestTable | not-accessible | current | The ATM Forum M4 VC Termination Point Test table. This table allows tests to be run on VCL and VCC termination points. The operation of this table is entirely … |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1 | RowatmfM4VcTestEntry | not-accessible | current | An entry containing objects for invoking tests on a VCL or VCC termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1.1 | ColumnatmfM4VcTestObject | not-accessible | current | Specifies whether the test applies to the VCL termination point with the specified VPI and VCI values, or to the VCC termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1.2 | ColumnatmfM4VcTestId | read-write | current | This object identifies the current invocation of the interface's test. |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1.3 | ColumnatmfM4VcTestStatus | read-write | current | This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i… |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1.5 | ColumnatmfM4VcTestResult | read-only | current | This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this … |
| 1.3.6.1.4.1.353.5.1.3.1.1.26.1.7 | ColumnatmfM4VcTestOwner | read-write | current | The entity which currently has the 'ownership' required to invoke a test on this termination point. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28 | TableatmfM4EquipTable | not-accessible | current | The ATM Forum M4 Equipment table. This table augments the entPhysicalTable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1 | RowatmfM4EquipEntry | not-accessible | current | An entry in the ATM Forum M4 Equipment table. Each entry of this table represents a piece of equipment within the ATM NE that neither is nor accepts a replacea… |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.1 | ColumnatmfM4EquipAdminStatus | read-write | current | Used by the administrator to lock and unlock the object. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.2 | ColumnatmfM4EquipLocation | read-write | current | The specific or general location of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.3 | ColumnatmfM4EquipOperStatus | read-only | current | This attributes identifies whether or not the component is capable of performing its normal functions. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.4 | ColumnatmfM4EquipVendor | read-only | current | The vendor of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.5 | ColumnatmfM4EquipVersion | read-only | current | The version of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.6 | ColumnatmfM4EquipUserLabel | read-write | current | A user-friendly name for the piece of equipment. The default value of this object is the null string. |
| 1.3.6.1.4.1.353.5.1.3.1.1.28.1.7 | ColumnatmfM4EquipAlarmSeverityIndex | read-write | current | An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object… |
| 1.3.6.1.4.1.353.5.1.3.1.1.29 | TableatmfM4EquipHolderTable | not-accessible | current | The ATM Forum M4 Equipment Holder table. This table augments the entPhysicalTable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.29.1 | RowatmfM4EquipHolderEntry | not-accessible | current | An entry in the ATM Forum M4 Equipment Holder table. Each entry of this table represents a component within the ATM NE that accepts a replaceable plug-in unit. |
| 1.3.6.1.4.1.353.5.1.3.1.1.29.1.1 | ColumnatmfM4EquipHolderType | read-only | current | The type of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.29.1.2 | ColumnatmfM4EquipHolderAcceptableTypes | read-only | current | The types of plug-in units that can be supported by the slot, separated by newline characters. This attribute shall be present only when the Equipment Holder r… |
| 1.3.6.1.4.1.353.5.1.3.1.1.29.1.3 | ColumnatmfM4EquipHolderSlotStatus | read-only | current | This attributes identifies whether or not a plug-in unit is present in the slot. This attribute shall be present only when the Equipment Holder represents a sl… |
| 1.3.6.1.4.1.353.5.1.3.1.1.29.1.4 | ColumnatmfM4EquipHolderSwLoad | read-write | current | An index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is need… |
| 1.3.6.1.4.1.353.5.1.3.1.1.30 | TableatmfM4PlugInUnitTable | not-accessible | current | The ATM Forum M4 Plug-In Unit table. This table augments the entPhysicalTable. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1 | RowatmfM4PlugInUnitEntry | not-accessible | current | An entry in the ATM Forum M4 Plug-In Unit table. Each entry of this table represents a piece of equipment within the ATM NE that is inserted into and removed f… |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.1 | ColumnatmfM4PlugInUnitAdminStatus | read-write | current | Used by the administrator to lock and unlock the object. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.2 | ColumnatmfM4PlugInUnitAvailStatus | read-only | current | Provides further information regarding the state of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.3 | ColumnatmfM4PlugInUnitOperStatus | read-only | current | This attributes identifies whether or not the component is capable of performing its normal functions. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.4 | ColumnatmfM4PlugInUnitVendor | read-only | current | The vendor of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.5 | ColumnatmfM4PlugInUnitVersion | read-only | current | The version of the component. |
| 1.3.6.1.4.1.353.5.1.3.1.1.30.1.6 | ColumnatmfM4PlugInUnitAlarmSeverityIndex | read-write | current | An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object… |
| 1.3.6.1.4.1.353.5.1.3.1.1.32 | TableatmfM4HwRunningSwTable | not-accessible | current | The ATM Forum M4 Hardware Unit/Running Software relationship table. This table describes the software that is running on each hardware unit in the ATM NE. |
| 1.3.6.1.4.1.353.5.1.3.1.1.32.1 | RowatmfM4HwRunningSwEntry | not-accessible | current | An entry in the ATM Forum M4 Hardware Unit/Running Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one in… |
| 1.3.6.1.4.1.353.5.1.3.1.1.32.1.1 | ColumnatmfM4HwRunningSwHwIndex | not-accessible | current | The index, in the entPhysicalTable, of the containing hardware unit in this pair. |
| 1.3.6.1.4.1.353.5.1.3.1.1.32.1.2 | ColumnatmfM4HwRunningSwIndex | not-accessible | current | A unique number within the context of the containing hardware unit. |
| 1.3.6.1.4.1.353.5.1.3.1.1.32.1.3 | ColumnatmfM4HwRunningSwSwIndex | read-only | current | The index, in the hrSWRunTable, of the software product represented by this entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.33 | TableatmfM4HwInstalledSwTable | not-accessible | current | The ATM Forum M4 Hardware Unit/Installed Software relationship table. This table describes the software that is installed on each hardware unit in the ATM NE. |
| 1.3.6.1.4.1.353.5.1.3.1.1.33.1 | RowatmfM4HwInstalledSwEntry | not-accessible | current | An entry in the ATM Forum M4 Hardware Unit/Installed Software relationship table. Each entry of this table identifies an entry in the entPhysicalTable and one … |
| 1.3.6.1.4.1.353.5.1.3.1.1.33.1.1 | ColumnatmfM4HwInstalledSwHwIndex | not-accessible | current | The index, in the entPhysicalTable, of the containing physical entity in this pair. |
| 1.3.6.1.4.1.353.5.1.3.1.1.33.1.2 | ColumnatmfM4HwInstalledSwIndex | not-accessible | current | A unique number within the context of the containing hardware unit. |
| 1.3.6.1.4.1.353.5.1.3.1.1.33.1.3 | ColumnatmfM4HwInstalledSwSwIndex | read-only | current | The index, in the hrSWInstalledTable, of the software product represented by this entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.33.1.4 | ColumnatmfM4HwSwAlarmSeverityIndex | read-write | current | An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this piece of software installed on the hardware… |
| 1.3.6.1.4.1.353.5.1.3.1.1.34 | ScalaratmfM4AlarmSevDefault | read-write | current | The default severity value used for new profile index/trap ID pairs that have not yet been modified. This value is also used whenever an object's alarm severit… |
| 1.3.6.1.4.1.353.5.1.3.1.1.35 | ScalaratmfM4AlarmSevProfileIndexNext | read-only | current | This object contains an appropriate value to be used for atmfM4AlarmSevProfileIndex when creating entries in the atmfM4AlarmSevProfileTable. The value -1 indic… |
| 1.3.6.1.4.1.353.5.1.3.1.1.36 | TableatmfM4AlarmSevProfileTable | not-accessible | current | The ATM Forum M4 alarm severity profile table. This table specifies which profiles exist. Creating or deleting an entry in this table automatically creates or … |
| 1.3.6.1.4.1.353.5.1.3.1.1.36.1 | RowatmfM4AlarmSevProfileEntry | not-accessible | current | A group of severities, one for each alarm type in the communications alarm group. |
| 1.3.6.1.4.1.353.5.1.3.1.1.36.1.1 | ColumnatmfM4AlarmSevProfileIndex | not-accessible | current | A number identifying this alarm severity profile. |
| 1.3.6.1.4.1.353.5.1.3.1.1.36.1.2 | ColumnatmfM4AlarmSevProfileRowStatus | read-create | current | This object is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.353.5.1.3.1.1.37 | TableatmfM4AlarmSevTable | not-accessible | current | The ATM Forum M4 alarm severity table. This table associates profile index and trap ID pairs with severities to be used for M4 alarm traps that have occurred. … |
| 1.3.6.1.4.1.353.5.1.3.1.1.37.1 | RowatmfM4AlarmSevEntry | not-accessible | current | An entry in this table associates an alarm severity profile index/trap ID pair with a severity. Deleting a particular profile's row in the alarm severity profi… |
| 1.3.6.1.4.1.353.5.1.3.1.1.37.1.1 | ColumnatmfM4AlarmSevTrapId | not-accessible | current | The ID of the trap type to which this entry applies. |
| 1.3.6.1.4.1.353.5.1.3.1.1.37.1.2 | ColumnatmfM4AlarmSeverity | read-create | current | The severity to be used for this trap type when the TrapId is selected. If no value for this object has ever been set since the corresponding profile was creat… |
| 1.3.6.1.4.1.353.5.1.3.1.1.38 | IdentityatmfM4ForwardAllTraps | current | This is used as the value of the object atmfM4ForwardedTrapObject when traps from all objects are to be forwarded, or when there is only one object of the type… | |
| 1.3.6.1.4.1.353.5.1.3.1.1.39 | TableatmfM4TrapForwardingTable | not-accessible | current | The ATM Forum M4 Trap forwarding discriminator table. This table specifies which traps will be sent to which management system. |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1 | RowatmfM4TrapForwardingEntry | not-accessible | current | Information about a group of traps to be sent to a particular IP address. A new entry must have values for all attributes that do not have default values befor… |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.1 | ColumnatmfM4TrapForwardingIndex | not-accessible | current | A unique number identifying the table entry. |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.2 | ColumnatmfM4TrapForwardingDest | read-create | current | The IP address to which traps identified by this table entry should be sent. |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.3 | ColumnatmfM4ForwardedTrapId | read-create | current | The ID of the trap type to which this entry applies. |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.4 | ColumnatmfM4ForwardedTrapObject | read-create | current | The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. The special value { 0 0 } indic… |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.5 | ColumnatmfM4TrapForwardingPort | read-create | current | The UDP port on the specified management system to which traps identified by this entry should be sent. |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.6 | ColumnatmfM4LowestForwardedSeverity | read-create | current | The lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type spe… |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.7 | ColumnatmfM4ForwardedIndeterminate | read-create | current | When this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified event. This object has significance only if the trap … |
| 1.3.6.1.4.1.353.5.1.3.1.1.39.1.8 | ColumnatmfM4TrapForwardingRowStatus | read-create | current | This object is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40 | TableatmfM4TrapLogTable | not-accessible | current | The ATM Forum M4 Trap Agent log table. This table defines the trap logs currently maintained by the agent. The management system creates entries in this table … |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1 | RowatmfM4TrapLogEntry | not-accessible | current | Information about a single trap log. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.1 | ColumnatmfM4TrapLogSrc | not-accessible | current | The IP address of the SNMP agent whose traps are stored in this log. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.2 | ColumnatmfM4TrapLogType | not-accessible | current | The type of traps stored in this log. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.3 | ColumnatmfM4TrapLogAdminStatus | read-create | current | The management system uses this object to stop and start the operations of this object. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.4 | ColumnatmfM4TrapLogOperStatus | read-only | current | Indicates whether or not the log is capable of performing its normal operations. |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.5 | ColumnatmfM4TrapLogFullAction | read-create | current | Indicates the action that should be performed when no more log entries can be created due to a log-full condition. If the value of this object is wrap(2), each… |
| 1.3.6.1.4.1.353.5.1.3.1.1.40.1.6 | ColumnatmfM4TrapLogRowStatus | read-create | current | This object is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.353.5.1.3.1.1.41 | TableatmfM4LoggedTrapTable | not-accessible | current | The ATM Forum M4 Trap Agent logged trap table. This table is used to maintain the traps logged. |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1 | RowatmfM4LoggedTrapEntry | not-accessible | current | Information about a single trap in the log. Entries in this table are created automatically but can be deleted by the management system. Entries that represent… |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1.1 | ColumnatmfM4LoggedTrapIndex | not-accessible | current | A unique number identifying this entry in the log. When the maximum value for this object has been reached, it will wrap around to 0. |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1.2 | ColumnatmfM4LoggedTrapTime | read-only | current | The time at which this trap was logged. |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1.3 | ColumnatmfM4LoggedTrapID | read-only | current | The type of trap to which this entry applies. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred. |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1.4 | ColumnatmfM4LoggedTrapObject | read-only | current | The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. Together with the logged trap I… |
| 1.3.6.1.4.1.353.5.1.3.1.1.41.1.5 | ColumnatmfM4LoggedTrapRowStatus | read-write | current | This object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6). |
| 1.3.6.1.4.1.353.5.1.3.1.1.42 | TableatmfM4LoggedAlarmTable | not-accessible | current | The ATM Forum M4 Trap Agent logged alarm trap table. This table is used to maintain extra information for logged traps that represent alarm types. |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1 | RowatmfM4LoggedAlarmEntry | not-accessible | current | Information about the alarm-specific attributes of a single trap in the log. |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1.1 | ColumnatmfM4LoggedAlarmSeverity | read-only | current | The perceived severity of the alarm, as specified by the agent that generated it. |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1.2 | ColumnatmfM4LoggedAlarmBackedUp | read-only | current | If the value of this object is true, the agent reported in this trap that the failed object had been backed up. This object is only present if it was included … |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1.3 | ColumnatmfM4LoggedAlarmBUObject | read-only | current | Indicates the object that provided back-up services to the failed object. This object is only present if it was included in the alarm trap corresponding to thi… |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1.4 | ColumnatmfM4LoggedAlarmSpecificProb | read-only | current | Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descripti… |
| 1.3.6.1.4.1.353.5.1.3.1.1.42.1.5 | ColumnatmfM4LoggedAlarmRepairAct | read-only | current | Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the probl… |
| 1.3.6.1.4.1.353.5.1.3.1.1.43 | ScalaratmfM4TrapAlarmSeverity | accessible-for-notify | current | The perceived severity of the alarm, as specified by the agent that generated it. |
| 1.3.6.1.4.1.353.5.1.3.1.1.44 | ScalaratmfM4TrapAlarmBackedUp | accessible-for-notify | current | If the value of this object is true, the failed object has been backed up. |
| 1.3.6.1.4.1.353.5.1.3.1.1.45 | ScalaratmfM4TrapAlarmBUObject | accessible-for-notify | current | Indicates the object that provided back-up services to the failed object. |
| 1.3.6.1.4.1.353.5.1.3.1.1.46 | ScalaratmfM4TrapAlarmSpecificProb | accessible-for-notify | current | Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descripti… |
| 1.3.6.1.4.1.353.5.1.3.1.1.47 | ScalaratmfM4TrapAlarmRepairAct | accessible-for-notify | current | Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the probl… |
| 1.3.6.1.4.1.353.5.1.3.1.2 | NodeatmfM4MIBTraps | |||
| 1.3.6.1.4.1.353.5.1.3.1.2.0 | NodeatmfM4MIBTrapPrefix | |||
| 1.3.6.1.4.1.353.5.1.3.1.2.0.1 | NotificationatmfM4IfAisAlarm | current | Indicates that an AIS alarm condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.2 | NotificationatmfM4IfLcdAlarm | current | Indicates that an LCD (Loss of Cell Delineation) condition has occurred on the TC Adapter associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.3 | NotificationatmfM4IfLofAlarm | current | Indicates that an LOF (Loss of Frame) condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.4 | NotificationatmfM4IfLopAlarm | current | Indicates that an LOP (Loss of Pointer) condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.5 | NotificationatmfM4IfLosAlarm | current | Indicates that an LOS (Loss of Signal) condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.6 | NotificationatmfM4IfPayloadMismatchAlarm | current | Indicates that a payload type mismatch condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.7 | NotificationatmfM4IfXmissionErrAlarm | current | Indicates that an transmission error condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.8 | NotificationatmfM4IfPathTraceMismatchAlarm | current | Indicates that path trace mismatch condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.9 | NotificationatmfM4IfRdiAlarm | current | Indicates that an RDI (Remote Defect Indication) condition has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.10 | NotificationatmfM4IfSignalLabelMismatchAlarm | current | Indicates that a signal label mismatch has occurred on the physical path TP associated with the specified interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.11 | NotificationatmfM4VplTpAisAlarm | current | Indicates that an AIS alarm condition has occurred on the VPL TP associated with the specified interface and VPI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.12 | NotificationatmfM4VplTpRdiAlarm | current | Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPL TP associated with the specified interface and VPI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.13 | NotificationatmfM4VpcTpAisAlarm | current | Indicates that an AIS alarm condition has occurred on the VPC TP associated with the specified interface and VPI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.14 | NotificationatmfM4VpcTpRdiAlarm | current | Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPC TP associated with the specified interface and VPI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.15 | NotificationatmfM4VclTpAisAlarm | current | Indicates that an AIS alarm condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.16 | NotificationatmfM4VclTpRdiAlarm | current | Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.17 | NotificationatmfM4VccTpAisAlarm | current | Indicates that an AIS alarm condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.18 | NotificationatmfM4VccTpRdiAlarm | current | Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.19 | NotificationatmfM4HwBackPlaneAlarm | current | Indicates that a back-plane failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wi… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.20 | NotificationatmfM4HwCallEstErrAlarm | current | Indicates that a call establishment error condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) al… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.21 | NotificationatmfM4HwCongestionAlarm | current | Indicates that a congestion condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.22 | NotificationatmfM4HwExtIfDevProbAlarm | current | Indicates that an external interface device problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) al… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.23 | NotificationatmfM4HwLineCardAlarm | current | Indicates that a line-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wit… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.24 | NotificationatmfM4HwMultiplexerAlarm | current | Indicates that a multiplexer problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along w… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.25 | NotificationatmfM4HwPowerAlarm | current | Indicates that a power problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along w… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.26 | NotificationatmfM4HwProcessorAlarm | current | Indicates that a processor problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) alo… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.27 | NotificationatmfM4HwProtectionPathAlarm | current | Indicates that a protection path problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) alo… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.28 | NotificationatmfM4HwReceiverFailAlarm | current | Indicates that a receiver failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.29 | NotificationatmfM4HwPIUnitMissingAlarm | current | Indicates that a plug-in unit missing condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.30 | NotificationatmfM4HwPIUnitProbAlarm | current | Indicates that a plug-in unit problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.31 | NotificationatmfM4HwPIUnitMismatchAlarm | current | Indicates that a plug-in unit type mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.32 | NotificationatmfM4HwTimingProbAlarm | current | Indicates that a timing problem alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.33 | NotificationatmfM4HwXmitterFailAlarm | current | Indicates that a transmitter failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along w… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.34 | NotificationatmfM4HwTrunkCardAlarm | current | Indicates that a trunk-card problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wi… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.35 | NotificationatmfM4HwStorageCapacityAlarm | current | Indicates that a storage capacity problem condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) al… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.36 | NotificationatmfM4HwMemoryMismatchAlarm | current | Indicates that a memory mismatch alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.37 | NotificationatmfM4HwCorruptDataAlarm | current | Indicates that a corrupt data alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wi… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.38 | NotificationatmfM4HwSwEnvironAlarm | current | Indicates that a software environment problem has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wi… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.39 | NotificationatmfM4HwSwDownloadFailAlarm | current | Indicates that a software download failure has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.40 | NotificationatmfM4HwVersionMismatchAlarm | current | Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.41 | NotificationatmfM4HwFanFailAlarm | current | Indicates that a cooling fan failure condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along w… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.42 | NotificationatmfM4HwDoorOpenAlarm | current | Indicates that an enclosure door open condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.43 | NotificationatmfM4HwFuseFailAlarm | current | Indicates that a fuse failure alarm condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along wi… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.44 | NotificationatmfM4HwHighTempAlarm | current | Indicates that a high temperature condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.45 | NotificationatmfM4SwVersionMismatchAlarm | current | Indicates that a version mismatch condition has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with… | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.46 | NotificationatmfM4VplTpUp | current | Indicates that the operational state of the specified VPL termination point has transitioned to 'up'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.47 | NotificationatmfM4VplTpDown | current | Indicates that the operational state of the specified VPL termination point has transitioned to 'down'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.48 | NotificationatmfM4VclTpUp | current | Indicates that the operational state of the specified VCL termination point has transitioned to 'up'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.49 | NotificationatmfM4VclTpDown | current | Indicates that the operational state of the specified VCL termination point has transitioned to 'down'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.50 | NotificationatmfM4VplXConnUp | current | Indicates that the operational state of the specified VPL cross-connection has transitioned to 'up'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.51 | NotificationatmfM4VplXConnDown | current | Indicates that the operational state of the specified VPL cross-connection has transitioned to 'down'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.52 | NotificationatmfM4VclXConnUp | current | Indicates that the operational state of the specified VCL cross-connection has transitioned to 'up'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.53 | NotificationatmfM4VclXConnDown | current | Indicates that the operational state of the specified VCL cross-connection has transitioned to 'down'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.54 | NotificationatmfM4HwUnitUp | current | Indicates that the operational state of the specified hardware unit has transitioned to 'up'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.55 | NotificationatmfM4HwUnitDown | current | Indicates that the operational state of the specified hardware unit has transitioned to 'down'. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.56 | NotificationatmfM4AtmCellIfCreated | current | Indicates that an ATM cell layer interface has just been created on the interface. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.57 | NotificationatmfM4AtmCellIfDeleted | current | Indicates that the ATM cell layer interface has just been deleted. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.58 | NotificationatmfM4VpcTpCreated | current | Indicates that the VPC termination point has just been created. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.59 | NotificationatmfM4VpcTpDeleted | current | Indicates that the VPC termination point has just been deleted. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.60 | NotificationatmfM4VccTpCreated | current | Indicates that the VCC termination point has just been created. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.61 | NotificationatmfM4VccTpDeleted | current | Indicates that the VCC termination point has just been deleted. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.62 | NotificationatmfM4VplXConnCreated | current | Indicates that the VPL cross-connection has just been created. When a cross-connection is created along with its VPL endpoints, this trap should be emitted to … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.63 | NotificationatmfM4VplXConnDeleted | current | Indicates that the VPL cross-connection has just been deleted. When a cross-connection is deleted along with its VPL endpoints, this trap should be emitted to … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.64 | NotificationatmfM4VclXConnCreated | current | Indicates that the VCL cross-connection has just been created. When a cross-connection is created along with its VCL endpoints, this trap should be emitted to … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.65 | NotificationatmfM4VclXConnDeleted | current | Indicates that the VCL cross-connection has just been deleted. When a cross-connection is deleted along with its VCL endpoints, this trap should be emitted to … | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.66 | NotificationatmfM4HwUnitCreated | current | Indicates that the specified hardware unit has been installed at the specified location. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.67 | NotificationatmfM4HwUnitDeleted | current | Indicates that the specified hardware unit has been removed or de-installed from the specified location. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.68 | NotificationatmfM4InstalledSwCreated | current | Indicates that the specified software package has been installed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.69 | NotificationatmfM4InstalledSwDeleted | current | Indicates that the specified software package has been removed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.70 | NotificationatmfM4IfChanged | current | Indicates that the configuration of the interface has been changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.71 | NotificationatmfM4VplTpChanged | current | Indicates that the VPL termination point configuration has been changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.72 | NotificationatmfM4VclTpChanged | current | Indicates that the VCL termination point configuration has been changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.73 | NotificationatmfM4VplXConnChanged | current | Indicates that the VPL cross-connection configuration has been changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.74 | NotificationatmfM4VclXConnChanged | current | Indicates that the VCL cross-connection configuration has been changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.75 | NotificationatmfM4HwUnitChanged | current | Indicates that the specified hardware unit configuration has changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.2.0.76 | NotificationatmfM4InstalledSwChanged | current | Indicates that the specified software package configuration has changed. | |
| 1.3.6.1.4.1.353.5.1.3.1.3 | NodeatmfM4MIBConformance | |||
| 1.3.6.1.4.1.353.5.1.3.1.3.1 | NodeatmfM4Groups | |||
| 1.3.6.1.4.1.353.5.1.3.1.3.1.1 | GroupatmfM4General | current | The ATM Forum M4 ATM NE high-level objects. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.2 | GroupatmfM4PhysPathTpGroup | current | The ATM Forum M4 interface Configuration table extensions for the physical path termination point. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.3 | GroupatmfM4TcAdapterGroup | current | The ATM Forum M4 interface Configuration table extensions for the TC Adapter. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.4 | GroupatmfM4AtmLayerGroup | current | The ATM Forum M4 interface Configuration table extensions for the ATM cell layer. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.5 | GroupatmfM4VplGroup | current | The ATM Forum M4 VPL Termination Point Configuration table extensions. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.6 | GroupatmfM4VclGroup | current | The ATM Forum M4 VCL Termination Point Configuration table extensions. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.7 | GroupatmfM4VpXConnGroup | current | The ATM Forum M4 VP Cross-Connect Configuration table extensions. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.8 | GroupatmfM4VcXConnGroup | current | The ATM Forum M4 VC Cross-Connect Configuration table extensions. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.9 | GroupatmfM4VpNextVpiGroup | current | The ATM Forum M4 VP Next VPI value table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.10 | GroupatmfM4VcNextVciGroup | current | The ATM Forum M4 VC Next VCI value table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.11 | GroupatmfM4CellProtoCurrGroup | current | The ATM Forum M4 Cell Protocol Monitoring Current Data table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.12 | GroupatmfM4CellProtoHistGroup | current | The ATM Forum M4 Cell Protocol Monitoring History Data table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.13 | GroupatmfM4CellProtoErrorGroup | current | The ATM Forum M4 Cell Protocol Monitoring Error Log table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.14 | GroupatmfM4TcProtoCurrGroup | current | The ATM Forum M4 TC Adapter Protocol Monitoring Current Data table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.15 | GroupatmfM4TcProtoHistGroup | current | The ATM Forum M4 TC Adapter Protocol Monitoring History Data table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.16 | GroupatmfM4VpUpcNpcCurrGroup | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VPL termination points. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.17 | GroupatmfM4VpUpcNpcHistGroup | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VPL termination points. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.18 | GroupatmfM4VcUpcNpcCurrGroup | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring Current Data table for VCL termination points. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.19 | GroupatmfM4VcUpcNpcHistGroup | current | The ATM Forum M4 UPC/NPC Disagreement Monitoring History Data table for VCL termination points. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.20 | GroupatmfM4VpTestGroup | current | The ATM Forum M4 VP Termination Point Test table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.21 | GroupatmfM4VcTestGroup | current | The ATM Forum M4 VC Termination Point Test table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.22 | GroupatmfM4EquipGroup | current | The ATM Forum M4 Equipment table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.23 | GroupatmfM4EquipHolderGroup | current | The ATM Forum M4 Equipment Holder table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.24 | GroupatmfM4PlugInUnitGroup | current | The ATM Forum M4 Plug-In Unit table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.25 | GroupatmfM4HwRunningSwGroup | current | The ATM Forum M4 Hardware Unit/Running Software table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.26 | GroupatmfM4HwInstalledSwGroup | current | The ATM Forum M4 Hardware Unit/Installed Software table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.27 | GroupatmfM4AlarmSevGroup | current | The ATM Forum M4 Alarm handling objects. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.28 | GroupatmfM4TrapForwardingGroup | current | The ATM Forum M4 Trap forwarding table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.29 | GroupatmfM4TrapLogGroup | current | The ATM Forum M4 Trap Agent log table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.30 | GroupatmfM4LoggedTrapGroup | current | The ATM Forum M4 Trap Agent logged trap table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.31 | GroupatmfM4LoggedAlarmGroup | current | The ATM Forum M4 Trap Agent logged alarm trap table. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.1.32 | GroupatmfM4NotificationsGroup | current | The ATM Forum M4 notification list. | |
| 1.3.6.1.4.1.353.5.1.3.1.3.2 | NodeatmfM4Compliances | |||
| 1.3.6.1.4.1.353.5.1.3.1.3.2.1 | ComplianceatmfM4Compliance | not-accessible | current | The compliance statements are listed as a set up conformance units that correspond to each table. Support for all tables is mandatory. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmfM4AlarmLogSeverity | INTEGER { cleared(-1), indeterminate(0), critical(1), major(2), minor(3), warning(4) } | current | The value of this object identifies the severity of an alarm in the log, including 'cleared'. |
| AtmfM4AlarmSeverity | INTEGER { indeterminate(0), critical(1), major(2), minor(3), warning(4) } | current | The value of this object identifies the severity of an alarm that has occurred. (Note that there is no value corresponding to 'cleared'.) |