ATM-SOFT-PVC-MIB
69 objects
ATM Soft PVC MIB
Imported Objects
| ATM-MIB | atmVclVci atmVclVpi atmVplVpi |
| IF-MIB | ifIndex |
| RFC1155-SMI | enterprises |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.5 | NodeatmfSoftPvc | |||
| 1.3.6.1.4.1.353.5.5.1 | IdentityatmSoftPvcMIB | ATM Soft PVC MIB | ||
| 1.3.6.1.4.1.353.5.5.1.1 | NodeatmSoftPvcMIBObjects | |||
| 1.3.6.1.4.1.353.5.5.1.1.1 | NodeatmSoftPvcBaseGroup | |||
| 1.3.6.1.4.1.353.5.5.1.1.1.1 | ScalaratmSoftPvcCallFailuresTrapEnable | read-write | current | Allows the generation of traps in response to call failures. By default, this object is set to 'false'. |
| 1.3.6.1.4.1.353.5.5.1.1.1.2 | ScalaratmSoftPvcCallFailures | read-only | current | The number of times a series of call attempts has failed to establish a Soft PVCC or Soft PVPC. The number of call attempts in a series is determined by atmSof… |
| 1.3.6.1.4.1.353.5.5.1.1.1.3 | ScalaratmSoftPvcCurrentlyFailingSoftPVccs | read-only | current | The current number of Soft PVCCs for which there is an active row in the atmSoftPVccTable having an atmSoftPVccOperStatus with a value other than 'connected'. |
| 1.3.6.1.4.1.353.5.5.1.1.1.4 | ScalaratmSoftPvcCurrentlyFailingSoftPVpcs | read-only | current | The current number of Soft PVPCs for which there is an active row in the atmSoftPVpcTable having an atmSoftPVpcOperStatus with a value other than 'connected'. |
| 1.3.6.1.4.1.353.5.5.1.1.1.5 | ScalaratmSoftPvcNotificationInterval | read-write | current | The minimum interval between the sending of atmSoftPvcCallFailuresTrap notifications. |
| 1.3.6.1.4.1.353.5.5.1.1.2 | TableatmSoftPVccTable | not-accessible | current | The (conceptual) table used to manage Soft Permanent Virtual Channel Connections (Soft PVCCs). The Soft PVCC table is applicable only to switches. |
| 1.3.6.1.4.1.353.5.5.1.1.2.1 | RowatmSoftPVccEntry | not-accessible | current | Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) originating at a switch interface. A Soft PVCC is a VCC that is: - … |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.1 | ColumnatmSoftPVccLeafReference | not-accessible | current | An arbitrary integer which, in the case of the source VCL having an atmVclCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.2 | ColumnatmSoftPVccTargetAddress | read-create | current | The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated. |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.3 | ColumnatmSoftPVccTargetSelectType | read-create | current | Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI … |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.4 | ColumnatmSoftPVccTargetVpi | read-create | current | The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'. |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.5 | ColumnatmSoftPVccTargetVci | read-create | current | The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.6 | ColumnatmSoftPVccLastReleaseCause | read-only | current | Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Rele… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.7 | ColumnatmSoftPVccLastReleaseDiagnostic | read-only | current | Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for … |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.8 | ColumnatmSoftPVccOperStatus | read-only | current | Describes the status of the Soft PVCC. Valid values are: other - none of the types specified below establishmentInProgress - connection or party is not operati… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.9 | ColumnatmSoftPVccRestart | read-create | current | When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperSt… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.10 | ColumnatmSoftPVccRetryInterval | read-create | current | Defines the period to wait before attempting to establish the Soft PVCC after the first failed call attempt. The time to wait between subsequent call attempts … |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.11 | ColumnatmSoftPVccRetryTimer | read-only | current | Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the ti… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.12 | ColumnatmSoftPVccRetryThreshold | read-create | current | Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.13 | ColumnatmSoftPVccRetryFailures | read-only | current | Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is … |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.14 | ColumnatmSoftPVccRetryLimit | read-create | current | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.353.5.5.1.1.2.1.15 | ColumnatmSoftPVccRowStatus | read-create | current | Used to create and delete a Soft PVCC. When this object is set to 'active' an attempt is made to set up the Soft PVCC. When this object has the value 'active' … |
| 1.3.6.1.4.1.353.5.5.1.1.3 | TableatmSoftPVpcTable | not-accessible | current | The (conceptual) table used to manage Soft Permanent Virtual Path Connections (Soft PVPCs) The Soft PVPC table is applicable only to switches. |
| 1.3.6.1.4.1.353.5.5.1.1.3.1 | RowatmSoftPVpcEntry | not-accessible | current | Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) originating at a switch interface. A Soft PVPC is a VPC that is: - pro… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.1 | ColumnatmSoftPVpcLeafReference | not-accessible | current | An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to … |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.2 | ColumnatmSoftPVpcTargetAddress | read-create | current | The target ATM Address of this Soft PVPC. If no address is supplied, no attempts to establish the Soft PVPC are initiated. |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.3 | ColumnatmSoftPVpcTargetSelectType | read-create | current | Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In … |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.4 | ColumnatmSoftPVpcTargetVpi | read-create | current | The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is no… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.5 | ColumnatmSoftPVpcLastReleaseCause | read-only | current | Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Rele… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.6 | ColumnatmSoftPVpcLastReleaseDiagnostic | read-only | current | Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for … |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.7 | ColumnatmSoftPVpcOperStatus | read-only | current | Describes the status of the Soft PVPC. other - none of the types specified below establishmentInProgress - connection or party is not operational, but setup or… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.8 | ColumnatmSoftPVpcRestart | read-create | current | When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperS… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.9 | ColumnatmSoftPVpcRetryInterval | read-create | current | Defines the period to wait before attempting to establish the Soft PVPC after the first failed call attempt. The time to wait between subsequent call attempts … |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.10 | ColumnatmSoftPVpcRetryTimer | read-only | current | Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the ti… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.11 | ColumnatmSoftPVpcRetryThreshold | read-create | current | Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.12 | ColumnatmSoftPVpcRetryFailures | read-only | current | Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is … |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.13 | ColumnatmSoftPVpcRetryLimit | read-create | current | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.353.5.5.1.1.3.1.14 | ColumnatmSoftPVpcRowStatus | read-create | current | Used to create and delete a Soft PVPC. When this object is set to 'active' an attempt is made to set up the Soft PVPC. When this object has the value 'active' … |
| 1.3.6.1.4.1.353.5.5.1.1.4 | TableatmInterfaceSoftPvcAddressTable | not-accessible | current | This table is used to configure ATM addresses at an ATM interface on this node prior to setting up Soft PVPCs or Soft PVPCs at that interface. |
| 1.3.6.1.4.1.353.5.5.1.1.4.1 | RowatmInterfaceSoftPvcAddressEntry | not-accessible | current | ATM address entry for configuring Soft PVCCs or Soft PVPCs at an ATM interface. |
| 1.3.6.1.4.1.353.5.5.1.1.4.1.1 | ColumnatmInterfaceSoftPvcAddress | not-accessible | current | Specifies the address that can be used to establish a Soft PVCC or Soft PVPC to this interface. |
| 1.3.6.1.4.1.353.5.5.1.1.4.1.2 | ColumnatmInterfaceSoftPvcAddressRowStatus | read-create | current | Used to create and delete an ATM address at this interface for setting up Soft PVCCs or Soft PVPCs. |
| 1.3.6.1.4.1.353.5.5.1.1.5 | TableatmCurrentlyFailingSoftPVccTable | not-accessible | current | A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is … |
| 1.3.6.1.4.1.353.5.5.1.1.5.1 | RowatmCurrentlyFailingSoftPVccEntry | not-accessible | current | Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccO… |
| 1.3.6.1.4.1.353.5.5.1.1.5.1.1 | ColumnatmCurrentlyFailingSoftPVccTimeStamp | read-only | current | The time at which this Soft PVCC began to fail. |
| 1.3.6.1.4.1.353.5.5.1.1.6 | TableatmCurrentlyFailingSoftPVpcTable | not-accessible | current | A table indicating all Soft Permanent Virtual Path Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is oth… |
| 1.3.6.1.4.1.353.5.5.1.1.6.1 | RowatmCurrentlyFailingSoftPVpcEntry | not-accessible | current | Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOper… |
| 1.3.6.1.4.1.353.5.5.1.1.6.1.1 | ColumnatmCurrentlyFailingSoftPVpcTimeStamp | read-only | current | The time at which this Soft PVPC began to fail. |
| 1.3.6.1.4.1.353.5.5.1.2 | NodeatmSoftPvcMIBTraps | |||
| 1.3.6.1.4.1.353.5.5.1.2.1 | NodeatmSoftPvcTraps | |||
| 1.3.6.1.4.1.353.5.5.1.2.1.0 | NodeatmSoftPvcTrapsPrefix | |||
| 1.3.6.1.4.1.353.5.5.1.2.1.0.1 | NotificationatmSoftPvcCallFailuresTrap | current | A notification indicating that one or more series of call attempts in trying to establish a Soft PVPC or Soft PVCC have failed since the last atmSoftPvcCallFai… | |
| 1.3.6.1.4.1.353.5.5.1.3 | NodeatmSoftPvcMIBConformance | |||
| 1.3.6.1.4.1.353.5.5.1.3.1 | NodeatmSoftPvcMIBCompliances | |||
| 1.3.6.1.4.1.353.5.5.1.3.1.1 | ComplianceatmSoftPvcMIBCompliance | read-only | current | The compliance statement for the ATM Soft PVC group. |
| 1.3.6.1.4.1.353.5.5.1.3.2 | NodeatmSoftPvcMIBGroups | |||
| 1.3.6.1.4.1.353.5.5.1.3.2.1 | GroupatmSoftPvcBaseMIBGroup | current | A collection of objects to related to failing Soft PVCCs and Soft PVPCs. | |
| 1.3.6.1.4.1.353.5.5.1.3.2.2 | GroupatmSoftPvcVccMIBGroup | current | A collection of objects managing Soft PVCCs. | |
| 1.3.6.1.4.1.353.5.5.1.3.2.3 | GroupatmSoftPvcVpcMIBGroup | current | A collection of objects managing Soft PVPCs. | |
| 1.3.6.1.4.1.353.5.5.1.3.2.4 | GroupatmSoftPvcAddressMIBGroup | current | A collection of objects managing interfaces addresses for Soft PVCCs and Soft PVPCs. | |
| 1.3.6.1.4.1.353.5.5.1.3.2.5 | GroupatmCurrentlyFailingSoftPVccMIBGroup | current | A collection of objects for management of currently failing Soft PVCCs. | |
| 1.3.6.1.4.1.353.5.5.1.3.2.6 | GroupatmCurrentlyFailingSoftPVpcMIBGroup | current | A collection of objects for management of currently failing Soft PVPCs. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0|8|20)) | current | The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets)and NSAP (20 octets). Note: The E.164 address is encoded in BCD format. |