ATM-TC-MIB
31 objects
This MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used by ATM systems.
Imported Objects
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-IDENTITY TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.37.1.1 | NodeatmTrafficDescriptorTypes | |||
| 1.3.6.1.2.1.37.1.1.1 | IdentityatmNoTrafficDescriptor | deprecated | This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic. | |
| 1.3.6.1.2.1.37.1.1.2 | IdentityatmNoClpNoScr | current | This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/seco… | |
| 1.3.6.1.2.1.37.1.1.3 | IdentityatmClpNoTaggingNoScr | deprecated | This traffic descriptor is for CLP without tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in ce… | |
| 1.3.6.1.2.1.37.1.1.4 | IdentityatmClpTaggingNoScr | deprecated | This traffic descriptor is for CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells… | |
| 1.3.6.1.2.1.37.1.1.5 | IdentityatmNoClpScr | current | This traffic descriptor type is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second… | |
| 1.3.6.1.2.1.37.1.1.6 | IdentityatmClpNoTaggingScr | current | This traffic descriptor type is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in … | |
| 1.3.6.1.2.1.37.1.1.7 | IdentityatmClpTaggingScr | current | This traffic descriptor type is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cel… | |
| 1.3.6.1.2.1.37.1.1.8 | IdentityatmClpNoTaggingMcr | current | This traffic descriptor type is for CLP with Minimum Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in ce… | |
| 1.3.6.1.2.1.37.1.1.9 | IdentityatmClpTransparentNoScr | current | This traffic descriptor type is for the CLP- transparent model and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cel… | |
| 1.3.6.1.2.1.37.1.1.10 | IdentityatmClpTransparentScr | current | This traffic descriptor type is for the CLP- transparent model with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell … | |
| 1.3.6.1.2.1.37.1.1.11 | IdentityatmNoClpTaggingNoScr | current | This traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate … | |
| 1.3.6.1.2.1.37.1.1.12 | IdentityatmNoClpNoScrCdvt | current | This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/seco… | |
| 1.3.6.1.2.1.37.1.1.13 | IdentityatmNoClpScrCdvt | current | This traffic descriptor type is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second… | |
| 1.3.6.1.2.1.37.1.1.14 | IdentityatmClpNoTaggingScrCdvt | current | This traffic descriptor type is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in … | |
| 1.3.6.1.2.1.37.1.1.15 | IdentityatmClpTaggingScrCdvt | current | This traffic descriptor type is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cel… | |
| 1.3.6.1.2.1.37.3 | IdentityatmTCMIB | This MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used by ATM systems. | ||
| 1.3.6.1.2.1.37.3.1 | NodeatmObjectIdentities |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0..40)) | current | An ATM address. The semantics are implied by the length. The address types are: - no address (0 octets) - E.164 (8 octets) - NSAP (20 octets) In addition, when subaddresses are used the AtmAddr may represent the concate… |
| AtmConnCastType | INTEGER { p2p(1), p2mpRoot(2), p2mpLeaf(3) } | current | The type of topology of a connection (point- to-point, point-to-multipoint). In the case of point-to-multipoint, the orientation of this VPL or VCL in the connection. On a host: - p2mpRoot indicates that the host is the… |
| AtmConnKind | INTEGER { pvc(1), svcIncoming(2), svcOutgoing(3), spvcInitiator(4), spvcTarget(5) } | current | The type of call control used for an ATM connection at a particular interface. The use is as follows: pvc(1) Virtual link of a PVC. Should not be used for an PVC/SVC (i.e., Soft PVC) crossconnect. svcIncoming(2) Virtual… |
| AtmIlmiNetworkPrefix | OCTET STRING (SIZE(8|13)) | current | A network prefix used for ILMI address registration. In the case of ATM endsystem addresses (AESAs), the network prefix is the first 13 octets of the address which includes the AFI, IDI, and HO-DSP fields. In the case o… |
| AtmInterfaceType | INTEGER { other(1), autoConfig(2), ituDss2(3), atmfUni3Dot0(4), atmfUni3Dot1(5), atmfUni4Dot0(6), atmfIispUni3Dot0(7), atmfIispUni3Dot1(8), atmfIispUni4Dot0(9), atmfPnni1Dot0(10), atmfBici2Dot0(11), atmfUniPvcOnly(12), atmfNniPvcOnly(13) } | current | The connection setup procedures used for the identified interface. Other: Connection setup procedures other than those listed below. Auto-configuration: Indicates that the connection setup procedures are to be determine… |
| AtmServiceCategory | INTEGER { other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6) } | current | The service category for a connection. |
| AtmSigDescrParamIndex | INTEGER (0..2147483647) | current | The value of this object identifies a row in the atmSigDescrParamTable. The value 0 signifies that none of the signalling parameters defined in the atmSigDescrParamTable are applicable. |
| AtmTrafficDescrParamIndex | INTEGER (0..2147483647) | current | The value of this object identifies a row in the atmTrafficDescrParamTable. The value 0 signifies that no row has been identified. |
| AtmVcIdentifier | INTEGER (0..65535) | current | The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. |
| AtmVorXAdminStatus | INTEGER { up(1), down(2) } | current | The value determines the desired administrative status of a virtual link or cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on the virtual link or cross-connect. |
| AtmVorXLastChange | TimeTicks | current | The value of MIB II's sysUpTime at the time a virtual link or cross-connect entered its current operational state. If the current state was entered prior to the last re-initialization of the agent then this object conta… |
| AtmVorXOperStatus | INTEGER { up(1), down(2), unknown(3) } | current | The value determines the operational status of a virtual link or cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on the virtual link or cross-connect. The unknown… |
| AtmVpIdentifier | INTEGER (0..4095) | current | The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 A… |