ATMF-CES
67 objects
The MIB module used to describe the Circuit Emulation Interworking Function (Version 2.0)
Imported Objects
| IF-MIB | InterfaceIndex |
| RFC1155-SMI | enterprises |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.2 | NodeatmfCESmib | |||
| 1.3.6.1.4.1.353.5.2.2 | IdentityatmfCES | The MIB module used to describe the Circuit Emulation Interworking Function (Version 2.0) | ||
| 1.3.6.1.4.1.353.5.2.2.1 | NodeatmfCESObjects | |||
| 1.3.6.1.4.1.353.5.2.2.1.1 | TableatmfCESConfTable | not-accessible | current | The CES configuration table used to manage interworking between CBR interfaces or channels and ATM Virtual Channel Links (VCLs). The reverse mapping is shown i… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1 | RowatmfCESConfEntry | not-accessible | current | An entry in the CES configuration table. There is one entry in the table per CES entity, mapping one CBR interface, channel, or bundle to an ATM VCL. Creation … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.1 | ColumnatmfCESCbrIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connected to an ATM VCL. |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.2 | ColumnatmfCESAtmIndex | read-create | current | The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES IWF to a CBR interface. This value is overwritten… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.3 | ColumnatmfCESAtmVpi | read-create | current | The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.4 | ColumnatmfCESAtmVci | read-create | current | The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active o… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.5 | ColumnatmfCESCbrService | read-create | current | Define if DSx/Ex service isas structured or unstructurednot. A structured(2) interface is some nx64kbKbps. An unstructured (1) interface is 1.544Mbps, 2.048Mbp… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.6 | ColumnatmfCESCbrClockMode | read-create | current | Define if DSx/Ex service clocking mode. This maps into transmit clock source of CBR interface. For structured modes this value, if present, must be set to sync… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.7 | ColumnatmfCESCas | read-create | current | This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, ds1SfCas, dS1EsfCas and j2Cas … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.8 | ColumnatmfCESPartialFill | read-create | current | If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, an… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.9 | ColumnatmfCESBufMaxSize | read-create | current | Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer size to be programmed to a si… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.10 | ColumnatmfCESCdvRxT | read-create | current | The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without producing errors on the CBR service … |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.11 | ColumnatmfCESCellLossIntegrationPeriod | read-create | current | The time in milliseconds for the cell loss integration period. If a cells are continuously lost for this period of time, atmfCESCellLossStatus is set to loss (… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.12 | ColumnatmfCESConnType | read-create | current | The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc - supporting connectivity is a perma… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.13 | ColumnatmfCESLocalAddr | read-create | current | The ATM address of the local CES IWF process. This address may be used by the automatic SVC establishment procedures to identify the intended recipient CES IWF… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.14 | ColumnatmfCESAdminStatus | read-create | current | The desired administrative status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively a… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.15 | ColumnatmfCESOperStatus | read-only | current | The operational status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively across the C… |
| 1.3.6.1.4.1.353.5.2.2.1.1.1.16 | ColumnatmfCESConfRowStatus | read-create | current | This object is used to create new rows in this table, modify existing rows, and to delete existing rows. |
| 1.3.6.1.4.1.353.5.2.2.1.2 | TableatmfCESMappingTable | not-accessible | current | The CES mapping table used to show the mapping from ATM VCLs to CBR interfaces or channels. The mapping and interworking functions are configured in the atmfCE… |
| 1.3.6.1.4.1.353.5.2.2.1.2.1 | RowatmfCESMappingEntry | not-accessible | current | An entry in the CES mapping table. There is one entry in the table corresponding to each active row in the atmfCESConfTable for which there is a non-zero atmfC… |
| 1.3.6.1.4.1.353.5.2.2.1.2.1.1 | ColumnatmfCESMappingCbrIndex | read-only | current | The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connected to an ATM VCL. Examples of t… |
| 1.3.6.1.4.1.353.5.2.2.1.3 | TableatmfCESStatsTable | not-accessible | current | The CES AAL1 statistical data table. |
| 1.3.6.1.4.1.353.5.2.2.1.3.1 | RowatmfCESStatsEntry | not-accessible | current | An entry in the CES AAL1 Stats table. There is one entry in this table corresponding to each entry in the atmfCESConfTable. |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.1 | ColumnatmfCESReassCells | read-only | current | This count gives the number of cells played out to the CES Service Interface. It excludes cells that were discarded for any reason, including cells that were n… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.2 | ColumnatmfCESHdrErrors | read-only | current | The count of the number of AAL1 header errors detected, including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.3 | ColumnatmfCESPointerReframes | read-only | current | This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be rea… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.4 | ColumnatmfCESPointerParityErrors | read-only | current | This records the count of the number of events in which the AAL1 reassembler detects a parity check failure at the point where a structured data pointer is exp… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.5 | ColumnatmfCESAal1SeqErrors | read-only | current | Number of times that the sequence number of an incoming AAL1 Type 1 SAR-PDU causes a transition from the 'sync' state to the 'out of sequence' state, as define… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.6 | ColumnatmfCESLostCells | read-only | current | Number of lost cells, as detected by the AAL1 sequence number processing, for example. This records the count of the number of cells detected as lost in the ne… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.7 | ColumnatmfCESMisinsertedCells | read-only | current | Number of AAL1 sequence violations which the AAL Convergence sublayer interprets as a misinserted cell, as defined by ITU-T I.363.1. |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.8 | ColumnatmfCESBufUnderflows | read-only | current | Number of buffer underflows. This records the count of the number of times the CES reassembly buffer underflows. In the case of a continuous underflow caused b… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.9 | ColumnatmfCESBufOverflows | read-only | current | Number of buffer overflows. This records the count of the number of times the CES reassembly buffer overflows. If the CES IWF is implemented with multiple buff… |
| 1.3.6.1.4.1.353.5.2.2.1.3.1.10 | ColumnatmfCESCellLossStatus | read-only | current | When cells are continuously lost for the number of milliseconds specified by atmfCESCellLossIntegrationPeriod, the value is set to loss (2). When cells are no … |
| 1.3.6.1.4.1.353.5.2.2.1.4 | TableatmfCESActiveSvcTable | not-accessible | current | The table used to manage active SVCs established across ATM networks between CES entities. |
| 1.3.6.1.4.1.353.5.2.2.1.4.1 | RowatmfCESActiveSvcEntry | not-accessible | current | An entry in the CES active SVC table. There is one entry in the table corresponding to each active row in the atmfCESConfTable for which the atmfCESConnType ta… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.1 | ColumnatmfCESRemoteAddr | read-write | current | The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated. |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.2 | ColumnatmfCESFirstRetryInterval | read-write | current | The time to wait before attempting to establish the SVC after the first failed call attempt. The time to wait between subsequent call attempts may differ to im… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.3 | ColumnatmfCESRetryTimer | read-only | current | Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the active SVC. When the t… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.4 | ColumnatmfCESRetryLimit | read-write | current | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.5 | ColumnatmfCESRetryFailures | read-only | current | Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the active SVC is… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.6 | ColumnatmfCESActiveSvcRestart | read-write | current | When the value is set to 'restart' the active SVC is released if necessary and a new setup procedure is begun. As a result of this action, the atmfCESActiveSvc… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.7 | ColumnatmfCESActiveSvcOperStatus | read-only | current | Describes the status of the active SVC. Valid values are: other - none of the types specified below establishmentInProgress - connection is not operational, bu… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.8 | ColumnatmfCESLastReleaseCause | read-only | current | Value of the Cause field of the Cause information element in the last RELEASE signalling message received for this active SVC. Indicates the reason for the rel… |
| 1.3.6.1.4.1.353.5.2.2.1.4.1.9 | ColumnatmfCESLastReleaseDiagnostics | read-only | current | Value of the first 8 bytes of diagnostic information from the Cause field of the Cause information element in the last RELEASE signalling message received for … |
| 1.3.6.1.4.1.353.5.2.2.2 | NodeatmfCESConformance | |||
| 1.3.6.1.4.1.353.5.2.2.2.1 | NodeatmfCESGroups | |||
| 1.3.6.1.4.1.353.5.2.2.2.1.1 | GroupatmfCESBasicConfigGroup | current | A collection of objects providing configuration information for generic Circuit Emulation Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.2 | GroupatmfCESOptionalConfigGroup | current | A collection of optional objects providing configuration information for generic Circuit Emulation Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.3 | GroupatmfCESBasicStatsGroup | current | A collection of objects providing statistics information for generic Circuit Emulation Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.4 | GroupatmfCESOptionalStatsGroup | current | A collection of optional objects providing statistics information for generic Circuit Emulation Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.5 | GroupatmfCESStructConfigGroup | current | A collection of objects providing configuration information for Structured DS1, E1 or J2 Nx64 kbit/s Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.6 | GroupatmfCESStructStatsGroup | current | A collection of objects providing statistics information for Structured DS1, E1 or J2 Nx64 kbit/s Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.7 | GroupatmfCESOptionalStructStatsGroup | current | A collection of optional objects providing statistics information for Structured DS1, E1 or J2 Nx64 kbit/s Service IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.8 | GroupatmfCESMappingGroup | current | A collection of objects providing information about the mapping from ATM VCLs to CBR interfaces or channels. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.9 | GroupatmfCESSvcConfigGroup | current | A collection of objects providing SVC connection establishment support configuration information for CES IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.1.10 | GroupatmfCESOptionalSvcConfigGroup | current | A collection of optional objects providing SVC connection establishment support configuration information for CES IWFs. | |
| 1.3.6.1.4.1.353.5.2.2.2.2 | NodeatmfCESCompliances | |||
| 1.3.6.1.4.1.353.5.2.2.2.2.1 | ComplianceatmfCESCompliance | read-only | current | The compliance statement for SNMP entities which support the ATM Forum Circuit Emulation Services. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0|8|20)) | current | The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets), and NSAP-encoded ATM Endsystem Address (20 octets). Note: The E.164 address is encoded in BCD format. |
| CESConnectionPort | INTEGER (0..2147483647) | current | Indicates the port associated with a Circuit Emulation connection. Objects of this type are always defined as part of a set that includes fooPort CESConnectionPort fooVpi VpiInteger fooVci VciInteger The interpretation … |
| VciInteger | INTEGER (0..65535) | current | An integer large enough to hold a VCI |
| VpiInteger | INTEGER (0..4095) | current | An integer large enough to hold a VPI |