ATTOBRIDGE-MIB
56 objects
Bridge Custom MIB
Imported Objects
| RFC1155-SMI | enterprises experimental IpAddress |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | NOTIFICATION-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4547 | Nodeattotech | |||
| 1.3.6.1.4.1.4547.1 | NodebridgeTempStatusChanged | The bridgeTempStatusChanged trap supports notification of temperature status changes in the bridge. The following information is returned: tempSensorIndex - th… | ||
| 1.3.6.1.4.1.4547.1 | Nodeproducts | |||
| 1.3.6.1.4.1.4547.1.2 | Identitybridge | Bridge Custom MIB | ||
| 1.3.6.1.4.1.4547.1.2.1 | NodebridgeConfig | |||
| 1.3.6.1.4.1.4547.1.2.1.1 | ScalartrapsEnabled | read-only | mandatory | Indicates whether traps are enabled or disabled. |
| 1.3.6.1.4.1.4547.1.2.1.2 | ScalarsnmpUpdatesEnabled | read-only | mandatory | Indicates whether SNMP updates are enabled or disabled. |
| 1.3.6.1.4.1.4547.1.2.1.3 | ScalarsnmpExtendedEnabled | read-only | mandatory | Indicates whether extended SNMP is enabled or disabled. |
| 1.3.6.1.4.1.4547.1.2.2 | NodebridgeStatus | |||
| 1.3.6.1.4.1.4547.1.2.2.1 | TabletempSensorTable | not-accessible | mandatory | The temperature sensor table stores information about the bridge temperature sensor. |
| 1.3.6.1.4.1.4547.1.2.2.1.1 | RowtempSensorEntry | not-accessible | mandatory | The temperature sensor table stores information about the bridge temperature sensor. |
| 1.3.6.1.4.1.4547.1.2.2.1.1.1 | ColumntempSensorIndex | read-only | mandatory | Used to index the sensor in the temperature sensor table. |
| 1.3.6.1.4.1.4547.1.2.2.1.1.2 | ColumntempSensorStatus | read-only | mandatory | The current status of the sensor (normal, warning or critical). |
| 1.3.6.1.4.1.4547.1.2.2.1.1.3 | Columntemperature | read-only | mandatory | The current temperature of the sensor. |
| 1.3.6.1.4.1.4547.1.2.2.2 | TablevoltageSensorTable | not-accessible | mandatory | The voltage sensor table stores information about the bridge voltage sensor. |
| 1.3.6.1.4.1.4547.1.2.2.2.1 | RowvoltageSensorEntry | not-accessible | mandatory | The voltage sensor table stores information about the bridge voltage sensor. |
| 1.3.6.1.4.1.4547.1.2.2.2.1.1 | ColumnvoltageSensorIndex | read-only | mandatory | Used to index the sensor in the voltage sensor table. |
| 1.3.6.1.4.1.4547.1.2.2.2.1.2 | ColumnvoltageSensorStatus | read-only | mandatory | The current status of the sensor (normal, warning or critical). |
| 1.3.6.1.4.1.4547.1.2.2.2.1.3 | Columnvoltage | read-only | mandatory | The current voltage of the sensor. |
| 1.3.6.1.4.1.4547.1.2.2.4 | ScalardeviceCount | read-only | mandatory | Number of devices present. |
| 1.3.6.1.4.1.4547.1.2.2.5 | TabledeviceCacheTable | not-accessible | mandatory | The device table stores information about the devices attached to the bridge. |
| 1.3.6.1.4.1.4547.1.2.2.5.1 | RowdeviceEntry | not-accessible | mandatory | The device table stores information about the devices attached to the bridge. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.1 | ColumndeviceCacheIndex | read-only | mandatory | Used to index the device table. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.2 | ColumndeviceSource | read-only | mandatory | A string representing the source interface, meaning the interface exposed to the host. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.3 | ColumndeviceDestination | read-only | mandatory | A string representing the destination interface, meaning the interface of the target device. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.4 | ColumndeviceType | read-only | mandatory | Device type (i.e. DISK, TAPE, etc.) of attached device. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.5 | ColumndeviceVendor | read-only | mandatory | Vendor name of attached device, from inquiry data. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.6 | ColumndeviceProduct | read-only | mandatory | Product name of attached device, from inquiry data. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.7 | ColumndeviceRevision | read-only | mandatory | Revision of attached device, from inquiry data. |
| 1.3.6.1.4.1.4547.1.2.2.5.1.8 | ColumndeviceState | read-only | mandatory | The current state of the device (online, offline, or unknown). |
| 1.3.6.1.4.1.4547.1.2.2.6 | ScalarerrorCount | read-only | mandatory | Number of errors that have occured since last bridge power-on or reset. |
| 1.3.6.1.4.1.4547.1.2.2.7 | ScalarerrorsSinceUpdate | read-only | mandatory | Number of errors that have occured since last MIB scan, which is approximately every 15sec. |
| 1.3.6.1.4.1.4547.1.2.2.8 | TableerrorTable | not-accessible | mandatory | The Device Error table stores information about errors that have occurred with the devices attached to the bridge. |
| 1.3.6.1.4.1.4547.1.2.2.8.1 | RowerrorEntry | not-accessible | mandatory | The Device Error table stores information about errors that have occurred with the devices attached to the bridge. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.1 | ColumnerrorIndex | read-only | mandatory | Used to index the error device table. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.2 | ColumnerrorDateStamp | read-only | mandatory | Date at which the error occurred. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.3 | ColumnerrorTimeStamp | read-only | mandatory | Time at which the error occurred. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.4 | ColumnerrorInitiator | read-only | mandatory | A string representing the initiator which issued the failed command. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.5 | ColumnerrorSource | read-only | mandatory | A string representing the source interface, meaning the interface exposed to the host, which is associated with the error. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.6 | ColumnerrorOpCode | read-only | mandatory | OpCode of the command which failed. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.7 | ColumnerrorSenseKey | read-only | mandatory | Sense Key returned as a result of the failed command. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.8 | ColumnerrorASC | read-only | mandatory | ASC returned as a result of the failed command. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.9 | ColumnerrorASCQ | read-only | mandatory | ASCQ returned as a result of the failed command. |
| 1.3.6.1.4.1.4547.1.2.2.8.1.10 | ColumnerrorLogSense | read-only | mandatory | Log Sense returned as a result of the failed command. |
| 1.3.6.1.4.1.4547.1.2.3 | NodebridgeTrapInfo | |||
| 1.3.6.1.4.1.4547.1.2.3.1 | ScalartrapMaxClients | read-only | mandatory | The maximum number of SNMP trap recipients supported by the unit. |
| 1.3.6.1.4.1.4547.1.2.3.3 | TabletrapClientTable | not-accessible | mandatory | A table containing a row for each IP address/port number that traps will be sent to. |
| 1.3.6.1.4.1.4547.1.2.3.3.1 | RowtrapClientEntry | not-accessible | mandatory | Ip/Port pair for a specific client. |
| 1.3.6.1.4.1.4547.1.2.3.3.1.1 | ColumntrapClientIndex | read-only | mandatory | Used to index a trap client in the trapClientTable. |
| 1.3.6.1.4.1.4547.1.2.3.3.1.2 | ColumntrapClientIpAddress | read-only | mandatory | The IP address of a client registered for traps in dotted notation. |
| 1.3.6.1.4.1.4547.1.2.3.3.1.3 | ColumntrapClientPort | read-only | mandatory | The UDP port to send traps for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in… |
| 1.3.6.1.4.1.4547.1.2.3.3.1.4 | ColumntrapClientFilter | read-only | mandatory | This value defines the trap severity filter for this trap host. The unit will send traps to this host that have a severity level less than or equal to this val… |
| 1.3.6.1.4.1.4547.1.2.3.3.1.5 | ColumntrapClientRowState | read-write | mandatory | Specifies the state of the row. rowDestroy READ : Can never happen WRITE : Remove this row from the table. rowInactive READ : Indicates that this row does not … |
| 1.3.6.1.4.1.4547.2 | NodebridgeVoltageStatusChanged | The bridgeVoltageStatusChanged trap supports notification of temperature status changes in the bridge. The following information is returned: voltageSensorInde… | ||
| 1.3.6.1.4.1.4547.4 | NodebridgeDeviceTransition | The bridgeDeviceTransition trap supports notification of device online/offline status changes in the bridge. The following information is returned: deviceCache… | ||
| 1.3.6.1.4.1.4547.5 | NodebridgeDeviceError | The bridgeDeviceTransition trap supports notification of device online/offline status changes in the bridge. The following information is returned: errorSource… |