AVAYA-ENTITY-MIB
73 objects
This module defines private extensions for Entity MIB
Imported Objects
| AVAYAGEN-MIB | lsg |
| ENTITY-MIB | entPhysicalDescr entPhysicalIndex entPhysicalParentRelPos PhysicalIndex |
| ENTITY-SENSOR-MIB | EntitySensorValue entPhySensorValue |
| RFC1213-MIB | mib-2 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6889.2.1.99 | IdentityavayaEntity | This module defines private extensions for Entity MIB | ||
| 1.3.6.1.4.1.6889.2.1.99.1 | TableavEntPhySensorTable | not-accessible | current | This table extends entPhySensorTable with thresholds on the sensors. |
| 1.3.6.1.4.1.6889.2.1.99.1.1 | RowavEntPhySensorEntry | not-accessible | current | Thresholds for sensors described in entPhySensorTable. The Threshold values correspond to entPhySensorValue. Entries are created in this table by the agent. An… |
| 1.3.6.1.4.1.6889.2.1.99.1.1.1 | ColumnavEntPhySensorHiShutdown | read-only | current | The system shuts down when the sensor reading reaches this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.2 | ColumnavEntPhySensorHiWarning | read-only | current | The system generates a warning event when the sensor reading rises and crosses this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.3 | ColumnavEntPhySensorHiWarningClear | read-only | current | The system generates a warning-clear event when the sensor reading falls and crosses below this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.4 | ColumnavEntPhySensorLoWarningClear | read-only | current | The system generates a warning-clear event when the sensor reading rises and crosses this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.5 | ColumnavEntPhySensorLoWarning | read-only | current | The system generates a warning event when the sensor reading falls and crosses this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.6 | ColumnavEntPhySensorLoShutdown | read-only | current | The system shuts down if the sensor reaches this value |
| 1.3.6.1.4.1.6889.2.1.99.1.1.7 | ColumnavEntPhySensorEventSupportMask | read-only | current | A trap and an event is generated upon threshold crossing if the correspond bit is set. Note that there may be other trap filtering mechanisms. 0/0: hiShutdown(… |
| 1.3.6.1.4.1.6889.2.1.99.2 | NodeavEntTraps | |||
| 1.3.6.1.4.1.6889.2.1.99.2.0 | NodeavEntTrapsV3separator | |||
| 1.3.6.1.4.1.6889.2.1.99.2.0.1 | NotificationavEntFanFlt | current | Fan Fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.2 | NotificationavEntFanOk | current | Fan Fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.4 | NotificationavEnt48vPwrFlt | current | 48V power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.5 | NotificationavEnt48vPwrFltOk | current | 48V power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.7 | NotificationavEnt5vPwrFlt | current | 5V power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.8 | NotificationavEnt5vPwrFltOk | current | 5V power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.10 | NotificationavEnt3300mvPwrFlt | current | 3.3V (3300mv) power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.11 | NotificationavEnt3300mvPwrFltOk | current | 3.3V (3300mv) power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.13 | NotificationavEnt2500mvPwrFlt | current | 2.5V (2500mv) power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.14 | NotificationavEnt2500mvPwrFltOk | current | 2.5V (2500mv) power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.16 | NotificationavEnt1800mvPwrFlt | current | 1.8V (1800mv) power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.17 | NotificationavEnt1800mvPwrFltOk | current | 1.8V (1800mv) power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.19 | NotificationavEnt1600mvPwrFlt | current | 1.6V (1600mv) power supply fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.20 | NotificationavEnt1600mvPwrFltOk | current | 1.6V (1600mv) power supply fault clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.22 | NotificationavEntAmbientHiTempFlt | current | Ambient High Temprature fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.23 | NotificationavEntAmbientHiTempFltOk | current | Ambient High Temprature clear | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.24 | NotificationavEntAmbientLoTempFlt | current | Ambient Low Temprature fault | |
| 1.3.6.1.4.1.6889.2.1.99.2.0.25 | NotificationavEntAmbientLoTempFltOk | current | Ambient High Temprature clear | |
| 1.3.6.1.4.1.6889.2.1.99.3 | NodeavEntPhyUSBDevices | |||
| 1.3.6.1.4.1.6889.2.1.99.3.0 | NodeavEntPhyUSBDevicesTraps | |||
| 1.3.6.1.4.1.6889.2.1.99.3.0.1 | NotificationavEntPhyUSBDeviceRemovalOnBackupRestoreOperation | current | The notification is based on usb mass storage device removal during backup/restore operation to it. If other usb devices are removed during this operation then… | |
| 1.3.6.1.4.1.6889.2.1.99.3.0.2 | NotificationavEntPhyUSBDeviceInsecureRemoval | current | The notification is based on usb device insecurely removal. | |
| 1.3.6.1.4.1.6889.2.1.99.3.0.3 | NotificationavEntPhyUSBDevicePowerFailure | current | The notification is based on usb device lack of power. For cases as: a. Connecting device which requires more power then gateway can supply. b. Connecting USB … | |
| 1.3.6.1.4.1.6889.2.1.99.3.0.4 | NotificationavEntPhyUSBDeviceNotSupported | current | The notification is based on attaching non supported usb device to the gateway. The Gateways supports usb mass storage devices based on flash drives that their… | |
| 1.3.6.1.4.1.6889.2.1.99.3.0.5 | NotificationavEntPhyUSBDeviceExceedMaxNumber | current | The notification is based on reaching the max number of usb devices connected to the gateway. G250/G350 allows only USB Modem with only one usb mass storage de… | |
| 1.3.6.1.4.1.6889.2.1.99.3.0.6 | NotificationavEntPhyUSBFileSystemNotSupported | current | The notification is based on reaching connecting USB mass storage device with file system that is not supported. | |
| 1.3.6.1.4.1.6889.2.1.99.3.1 | TableavEntPhyUSBDevicesTable | not-accessible | current | This table extends entPhysicalTable with USB devices parameters. |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1 | RowavEntPhyUSBDevicesEntry | not-accessible | current | This table includes extension to entPhysicalTable with usb devices parameters. |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.1 | ColumnavEntPhyUSBDeviceUSBSupportVersion | read-only | current | The USB standard version. Possible values are: 1.1 and 2.0. |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.2 | ColumnavEntPhyUSBDeviceClassCode | read-only | current | The usb device class code. Value Hex Value Descriptor 1 1 Audio 2 2 CDC-Control 3 3 HID 5 5 Physical 6 6 Image (subclass & protocol must be 1) 7 7 Printer 8 8 … |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.3 | ColumnavEntPhyUSBDeviceSubClassCode | read-only | current | The usb device subclass code. USB standard describe the following class codes: 0x01 - RBC (Reduced Block Commands) 0x02 - SFF-8020i, MMC-2 (ATAPI) 0x03 - QIC-1… |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.4 | ColumnavEntPhyUSBDeviceProtocol | read-only | current | The usb device protocol code. 0x0 - Control/Bulk/Interrupt protocol (with command completion Interrupt). 0x1 - Control/Bulk/Interrupt protocol (with no command… |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.5 | ColumnavEntPhyUSBDeviceVendorId | read-only | current | The USB device vendor HEX-formatted string as it is provided to the USB host by the USB device |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.6 | ColumnavEntPhyUSBDeviceSpeed | read-only | current | The USB device speed. Possible values: 'Low', 'Full' and 'High'. G250/G350 supports 'Full' and 'High' |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.7 | ColumnavEntPhyUSBDevicePower | read-only | current | The USB device power. Possible values: 'Unknown', 'Self Powered' and 'Bus Powered'. |
| 1.3.6.1.4.1.6889.2.1.99.3.1.1.8 | ColumnavEntPhyUSBDeviceCurrent | read-only | current | The USB current consumption in mA. |
| 1.3.6.1.4.1.6889.2.1.99.3.2 | TableavEntPhyUSBMassStorageDevicesTable | not-accessible | current | This table extends entPhysicalTable with USB mass storage devices parameters. |
| 1.3.6.1.4.1.6889.2.1.99.3.2.1 | RowavEntPhyUSBMassStorageDevicesEntry | not-accessible | current | This table includes extension to entPhysicalTable with usb mass storage devices parameters. |
| 1.3.6.1.4.1.6889.2.1.99.3.2.1.1 | ColumnavEntPhyUSBMassStorageDeviceFileSystemName | read-only | current | The usb mass storage device File system name. An exmaple for one usb mass storage device on the gateway is mapped to /usbdevice0/. |
| 1.3.6.1.4.1.6889.2.1.99.3.2.1.2 | ColumnavEntPhyUSBMassStorageDeviceCapacity | read-only | current | Capacity of USB Mass storage device in KBytes. |
| 1.3.6.1.4.1.6889.2.1.99.3.2.1.3 | ColumnavEntPhyUSBMassStorageDeviceFreeMemory | read-only | current | Free memory of USB Mass storage device in KB. For R/O USB mass storage devices (as CDROM) this value returns 0. Note that this MIB item shall be updated accord… |
| 1.3.6.1.4.1.6889.2.1.99.3.2.1.4 | ColumnavEntPhyUSBMassStorageDeviceFs | read-only | current | The file system supported by the USB device. Possible values: 'FAT16' and 'FAT32'. |
| 1.3.6.1.4.1.6889.2.1.99.4 | NodeavEntPhyNotificationDefinitions | |||
| 1.3.6.1.4.1.6889.2.1.99.4.1 | ScalaravEntPhySeverity | accessible-for-notify | current | The severity of the notification. |
| 1.3.6.1.4.1.6889.2.1.99.4.2 | ScalaravEntPhyProductId | accessible-for-notify | current | The Product Id of Avaya Device - 10 characters. |
| 1.3.6.1.4.1.6889.2.1.99.4.3 | ScalaravEntPhysicalIndex | accessible-for-notify | current | The index for this entry. |
| 1.3.6.1.4.1.6889.2.1.99.5 | NodeavEntPhyChFru | |||
| 1.3.6.1.4.1.6889.2.1.99.5.0 | NodeavEntPhyChFruNotifications | |||
| 1.3.6.1.4.1.6889.2.1.99.5.0.1 | NotificationavEntPhyChFruRemoval | current | FRU unit was removed from chassis | |
| 1.3.6.1.4.1.6889.2.1.99.5.0.2 | NotificationavEntPhyChFruInsertion | current | FRU unit was inserted into chassis | |
| 1.3.6.1.4.1.6889.2.1.99.5.0.3 | NotificationavEntPhyChFruPsuFlt | current | Power Supply unit failed | |
| 1.3.6.1.4.1.6889.2.1.99.5.0.4 | NotificationavEntPhyChFruPsuFltOk | current | Power Supply unit resumed operation | |
| 1.3.6.1.4.1.6889.2.1.99.5.0.5 | NotificationavEntPhyChFruExpansionTestFailure | current | Cable Test Failure on Expansion module | |
| 1.3.6.1.4.1.6889.2.1.99.5.0.6 | NotificationavEntPhyChFruExpansionTestClear | current | Cable Test Passed OK on Expansion module | |
| 1.3.6.1.4.1.6889.2.1.99.5.1 | TableavEntPhyChFruTable | not-accessible | current | Table depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray |
| 1.3.6.1.4.1.6889.2.1.99.5.1.1 | RowavEntPhyChFruEntry | not-accessible | current | Table entry depicting the status of chassis FRU units such as Power-Supplies and Fan-Tray |
| 1.3.6.1.4.1.6889.2.1.99.5.1.1.1 | ColumnavEntPhyChFruOperStat | read-only | current | Operational status of the chassis FRU unit. |
| 1.3.6.1.4.1.6889.2.1.99.5.1.1.2 | ColumnavEntPhyChFruFault | read-only | current | Description of fault, in case an FRU has failed |
| 1.3.6.1.4.1.6889.2.1.99.5.2 | GroupavEntPhyChFruGroup | current | avEntPhyChFruGroup | |
| 1.3.6.1.4.1.6889.2.1.99.5.3 | GroupavEntPhyChFruNotificationGroup | current | avEntPhyChFruNotificationGroup |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AvEntPhyItuPerceivedSeverity | INTEGER { cleared (1), indeterminate (2), critical (3), major (4), minor (5), warning (6) } | current | ITU perceived severity values |