AVIAT-MODEM-MIB
46 objects
This MIB module defines the Modem configuration objects for Aviat Networks radios.
Imported Objects
| AVIAT-TEXTCONVENTION-MIB | AviatModulationType |
| ENTITY-MIB | entPhysicalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| STXN-GLOBALREGISTER-MIB | aviatModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2509.9.3 | IdentityaviatModemModule | This MIB module defines the Modem configuration objects for Aviat Networks radios. | ||
| 1.3.6.1.4.1.2509.9.3.1 | NodeaviatModemConformance | |||
| 1.3.6.1.4.1.2509.9.3.1.1 | NodeaviatModemGroups | |||
| 1.3.6.1.4.1.2509.9.3.1.1.1 | GroupaviatModemObjectGroup | current | These are objects in the Aviat Modem management MIB. | |
| 1.3.6.1.4.1.2509.9.3.1.1.2 | GroupaviatModemXpicGroup | current | These are objects for configuring the cross polar interference cancellation (XPIC) functionality. | |
| 1.3.6.1.4.1.2509.9.3.1.1.3 | GroupaviatModemModulationStatsGroup | current | These are the objects in the modulation stats table introduced for WTM4000. They are not supported on all modems. | |
| 1.3.6.1.4.1.2509.9.3.1.1.4 | GroupaviatModemModulationCurrentGroup | current | These are the new 'current modulation' objects introduced for WTM4000. They are not supported on all modems. | |
| 1.3.6.1.4.1.2509.9.3.1.1.5 | GroupaviatModemStatusGroup | current | These are the new 'status' objects introduced for WTM4000. They are not supported on all modems. | |
| 1.3.6.1.4.1.2509.9.3.1.2 | NodeaviatModemCompliance | |||
| 1.3.6.1.4.1.2509.9.3.1.2.1 | ComplianceaviatModemComplV1 | current | The implementation requirements for this MIB. | |
| 1.3.6.1.4.1.2509.9.3.2 | NodeaviatModemMIBObjects | |||
| 1.3.6.1.4.1.2509.9.3.2.1 | TableaviatModemTable | not-accessible | current | A table containing the modem configuration objects for a particular entity of the system. |
| 1.3.6.1.4.1.2509.9.3.2.1.1 | RowaviatModemEntry | not-accessible | current | This is a row in the modem table. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.1 | ColumnaviatModemBandwidth | read-write | current | The modem channel bandwidth currently in use, in kilohertz. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.2 | ColumnaviatModemModulationType | read-write | current | This allocates an ACM license for this radio link allowing modulation up to and including this modulation. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.3 | ColumnaviatModemModulationBase | read-write | current | This specifies the base modulation to use for modem. Together with aviatModemModulationMax this is used to define the range of modulations that can be active f… |
| 1.3.6.1.4.1.2509.9.3.2.1.1.4 | ColumnaviatModemModulationMax | read-write | current | This specifies the maximum modulation to use for ACM. See the aviatModemModulationBase description for details. Setting Max without setting Acm mode to the app… |
| 1.3.6.1.4.1.2509.9.3.2.1.1.5 | ColumnaviatModemLicensedModulationMask | read-write | current | When configured for adaptive modulation, this specifies the licensed RF mask. Tx power output will be controlled to maintain compliance with the operator's lic… |
| 1.3.6.1.4.1.2509.9.3.2.1.1.6 | ColumnaviatModemRegulatoryStandard | read-write | current | This specifies the regulatory standard to use. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.7 | ColumnaviatModemProfileVersion | read-write | current | This sets the profile version to use. If a new profile comes out with the same characteristics to a previous one but not over air compatible, the new one will … |
| 1.3.6.1.4.1.2509.9.3.2.1.1.8 | ColumnaviatModemCapacity | read-write | current | This specifies the capacity to license for this interface. Set to 0 to unlicense. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.9 | ColumnaviatModemL1laLiteEnabled | read-write | current | Enabled L1laLite for this interface and it's partner |
| 1.3.6.1.4.1.2509.9.3.2.1.1.10 | ColumnaviatModemMLHCEnabled | read-write | current | Enable multilayer header compression for this radio interface. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.11 | ColumnaviatModemCurCapacityTx | read-only | current | Current capacity in the transmit direction. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.12 | ColumnaviatModemCurCapacityRx | read-only | current | Current capacity in the receive direction. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.13 | ColumnaviatModemCurModulationTx | read-only | current | Current modulation used to transmit. |
| 1.3.6.1.4.1.2509.9.3.2.1.1.14 | ColumnaviatModemCurModulationRx | read-only | current | Current modulation used to receive. |
| 1.3.6.1.4.1.2509.9.3.2.2 | TableaviatModemModulationTable | not-accessible | current | This is a table containing the list of modem modulations configured for use with adaptive modulation. This list is based on the settings of aviatModemModulatio… |
| 1.3.6.1.4.1.2509.9.3.2.2.1 | RowaviatModemModulationEntry | not-accessible | current | A single modulation entry for an entity. |
| 1.3.6.1.4.1.2509.9.3.2.2.1.1 | ColumnaviatModemModulationIndex | not-accessible | current | An index representing a particular modulation entry for an entity. |
| 1.3.6.1.4.1.2509.9.3.2.2.1.2 | ColumnaviatModemModulation | read-only | current | A configured modem modulation of the system. |
| 1.3.6.1.4.1.2509.9.3.2.3 | TableaviatModemXpicTable | not-accessible | current | A table containing configuration objects for the cross polarisation interference cancellation (XPIC) functionality for a particular entity of the system. |
| 1.3.6.1.4.1.2509.9.3.2.3.1 | RowaviatModemXpicEntry | not-accessible | current | This is a row in the modem XPIC table. |
| 1.3.6.1.4.1.2509.9.3.2.3.1.1 | ColumnaviatModemXpicEnable | read-write | current | This specifies whether the cross polarisation interference cancellation (XPIC) function is enabled. |
| 1.3.6.1.4.1.2509.9.3.2.4 | TableaviatModemStatusTable | not-accessible | current | A table containing read only information about the modem. |
| 1.3.6.1.4.1.2509.9.3.2.4.1 | RowaviatModemStatusEntry | not-accessible | current | This is a row in the modem status table. |
| 1.3.6.1.4.1.2509.9.3.2.4.1.1 | ColumnaviatModemStatusMaxCapacity | read-only | current | This is the maximum radio link capacity. |
| 1.3.6.1.4.1.2509.9.3.2.4.1.2 | ColumnaviatModemStatusOper | read-only | current | Operational status of radio link. Based off ifOperStatus |
| 1.3.6.1.4.1.2509.9.3.2.5 | TableaviatModemModulationStatsTable | not-accessible | current | This is a table containing information about the amount of time the radio spends at each modulation level. Counters are cumulative. No means to reset counters … |
| 1.3.6.1.4.1.2509.9.3.2.5.1 | RowaviatModemModulationStatsEntry | not-accessible | current | This is an entry in the table containing modulation time counters for a particular entity at a particular modulation level. |
| 1.3.6.1.4.1.2509.9.3.2.5.1.1 | ColumnaviatModemModStatsModulation | not-accessible | current | This is the modulation type to which the data in this is row refers. |
| 1.3.6.1.4.1.2509.9.3.2.5.1.2 | ColumnaviatModemModStatsTxSecs | read-only | current | This is the number of seconds in which the radio was using the specified modulation to transmit. |
| 1.3.6.1.4.1.2509.9.3.2.5.1.4 | ColumnaviatModemModStatsTxPct | read-only | current | This is the fraction of the total time in which the radio was receiving, where the radio was receiving in the specified modulation, multiplied by 1000000 (10^7… |
| 1.3.6.1.4.1.2509.9.3.2.5.1.5 | ColumnaviatModemModStatsRxSecs | read-only | current | This is the number of seconds in which the radio was using the specified modulation to receive. |
| 1.3.6.1.4.1.2509.9.3.2.5.1.6 | ColumnaviatModemModStatsRxPct | read-only | current | This is the fraction of the total time in which the radio was transmitting, where the radio was transmitting at the specified modulation, multiplied by 1000000… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AviatModemCapacityType | Gauge32 | current | Represents the capacity of a modem in one direction. This value is reported in kilobits per second, rounded to the nearest multiple of 1 kbps. Therefore, if the value of this object is equal to `n' then the capacity is … |