AVIAT-RF-MIB
52 objects
This MIB module supports the RF Fault Management functions of the radio.
Imported Objects
| AVIAT-TEXTCONVENTION-MIB | AviatDecibel AviatModulationType AviatPowerLevel AviatRfuSideBandType |
| ENTITY-MIB | entPhysicalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| STXN-GLOBALREGISTER-MIB | aviatModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2509.9.5 | IdentityaviatRfModule | This MIB module supports the RF Fault Management functions of the radio. | ||
| 1.3.6.1.4.1.2509.9.5.1 | NodeaviatRfConformance | |||
| 1.3.6.1.4.1.2509.9.5.1.1 | NodeaviatRfGroups | |||
| 1.3.6.1.4.1.2509.9.5.1.1.1 | GroupaviatRfObjectGroup | current | These objects specify the RF capabilities and settings of the unit. | |
| 1.3.6.1.4.1.2509.9.5.1.2 | NodeaviatRfCompliance | |||
| 1.3.6.1.4.1.2509.9.5.1.2.1 | ComplianceaviatRfComplV1 | current | The implementation requirements for this MIB. | |
| 1.3.6.1.4.1.2509.9.5.2 | NodeaviatRfMIBObjects | |||
| 1.3.6.1.4.1.2509.9.5.2.1 | TableaviatRfConfigTable | not-accessible | current | A table containing the RF configuration objects for a particular entity of the system. |
| 1.3.6.1.4.1.2509.9.5.2.1.1 | RowaviatRfConfigEntry | not-accessible | current | This is a row in the RF configuration table. |
| 1.3.6.1.4.1.2509.9.5.2.1.1.1 | ColumnaviatRfFreqTx | read-write | current | This specifies the transmit frequency of the unit. |
| 1.3.6.1.4.1.2509.9.5.2.1.1.2 | ColumnaviatRfFreqRx | read-write | current | This specifies the receive frequency of the unit. |
| 1.3.6.1.4.1.2509.9.5.2.1.1.3 | ColumnaviatRfPowerSet | read-write | current | This specifies the desired output power for the transmitter of the unit. |
| 1.3.6.1.4.1.2509.9.5.2.1.1.4 | ColumnaviatRfTxMute | read-write | current | This specifies the status of the factory mute of the unit. If set to TRUE, the transmitter output will be muted. It should be set to FALSE otherwise. This sett… |
| 1.3.6.1.4.1.2509.9.5.2.1.1.5 | ColumnaviatRfHighGain | read-write | current | This specifies whether to assign a high power license to this RF interface. If set to TRUE a license has been assigned, FALSE otherwise. |
| 1.3.6.1.4.1.2509.9.5.2.1.1.6 | ColumnaviatRfBandSelection | read-write | current | This is used to select a sub-band within the frequency range of the attached RFU. It is intended to limit the frequencies available for configuration of the RF… |
| 1.3.6.1.4.1.2509.9.5.2.2 | TableaviatRfATPCTable | not-accessible | current | A table containing the RF ATPC configuration objects for a particular entity of the system. |
| 1.3.6.1.4.1.2509.9.5.2.2.1 | RowaviatRfATPCEntry | not-accessible | current | This is a row in the RF ATPC table. |
| 1.3.6.1.4.1.2509.9.5.2.2.1.1 | ColumnaviatRfATPCEnabled | read-write | current | This is the control to enable or disable the Automatic Transmit Power Control (ATPC) function on the unit. |
| 1.3.6.1.4.1.2509.9.5.2.2.1.2 | ColumnaviatRfATPCTargetFadeMargin | read-write | current | This specifies the desired nominal fade margin that the Automatic Transmit Power Control function should attempt to maintain. |
| 1.3.6.1.4.1.2509.9.5.2.2.1.3 | ColumnaviatRfATPCMaximumPower | read-write | current | This specifies the maximum power level that the Automatic Transmit Power Control function may set. |
| 1.3.6.1.4.1.2509.9.5.2.2.1.4 | ColumnaviatRfATPCMinimumPower | read-write | current | This specifies the minimum power level that the Automatic Transmit Power Control function may set. |
| 1.3.6.1.4.1.2509.9.5.2.2.1.5 | ColumnaviatRfATPCFCCCompliant | read-write | current | This is the control to enable or disable the Federal Communications Commission (FCC) compliant Automatic Transmit Power Control function. |
| 1.3.6.1.4.1.2509.9.5.2.3 | TableaviatRfuCapabilityTable | not-accessible | current | A table containing the capabilities of an attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.3.1 | RowaviatRfuCapabilityEntry | not-accessible | current | This is a row in the RFU capabilities table. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.1 | ColumnaviatRfuTxFreqMax | read-only | current | The RFU maximum transmit frequency capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.2 | ColumnaviatRfuTxFreqMin | read-only | current | The RFU minimum Tx frequency capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.3 | ColumnaviatRfuRxFreqMax | read-only | current | The RFU maximum Rx frequency capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.4 | ColumnaviatRfuRxFreqMin | read-only | current | The RFU minimum Rx frequency capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.5 | ColumnaviatRfuFreqStepMin | read-only | current | The RFU minimum frequency step size capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.6 | ColumnaviatRfuBandwidthMax | read-only | current | The RFU maximum bandwidth capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.7 | ColumnaviatRfuTxRxSpacingMax | read-only | current | The RFU maximum Tx Rx spacing capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.8 | ColumnaviatRfuTxRxSpacingMin | read-only | current | The RFU minimum Tx Rx spacing capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.9 | ColumnaviatRfuTxPowerMax | read-only | current | The RFU maximum Tx power capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.10 | ColumnaviatRfuTxPowerMin | read-only | current | The RFU minimum Tx power capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.11 | ColumnaviatRfuPowerStep | read-only | current | The RFU power step capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.12 | ColumnaviatRfuNoiseFigure | read-only | current | The RFU noise figure capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.13 | ColumnaviatRfuModulationMax | read-only | current | This RFU maximum modulation capability. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.14 | ColumnaviatRfuTxRxSpacingPreset | read-only | current | Indicates if the valid RFU Tx Rx spacing range is limited to the preset values provided by aviatRfuTxSpacingTable. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.15 | ColumnaviatRfuTxSideBand | read-only | current | Indicates the RFU side band. |
| 1.3.6.1.4.1.2509.9.5.2.3.1.16 | ColumnaviatRfuTxPowerLimit | read-only | current | RFU maximum Tx power limit for any modulation. |
| 1.3.6.1.4.1.2509.9.5.2.4 | TableaviatRfuTxSpacingTable | not-accessible | current | A table containing the allowed spacings for an attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.4.1 | RowaviatRfuTxSpacingEntry | not-accessible | current | This is a row in the RFU Tx spacing table. |
| 1.3.6.1.4.1.2509.9.5.2.4.1.1 | ColumnaviatRfuTxSpacingIndex | not-accessible | current | An index representing a TxRx Spacing entry for an entity. |
| 1.3.6.1.4.1.2509.9.5.2.4.1.2 | ColumnaviatRfuTxSpacingFreq | read-only | current | A TxRx spacing entry valid for the system. |
| 1.3.6.1.4.1.2509.9.5.2.5 | TableaviatRfuDetailsTable | not-accessible | current | A table containing the details of an attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.5.1 | RowaviatRfuDetailsEntry | not-accessible | current | This is a row in the RFU details table. |
| 1.3.6.1.4.1.2509.9.5.2.5.1.1 | ColumnaviatRfuType | read-only | current | The type indentification of the attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.5.1.2 | ColumnaviatRfuFreqBand | read-only | current | The frequency band indication of the attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.5.1.3 | ColumnaviatRfuPowerAmp | read-only | current | The power amplifier type of the attached RFU. |
| 1.3.6.1.4.1.2509.9.5.2.5.1.4 | ColumnaviatRfuSemiconductorTech | read-only | current | The semiconductor technology used in the power amplifier of the attached RFU. This is used to determine whether IDQ optimization is necessary for GaN type devi… |
| 1.3.6.1.4.1.2509.9.5.2.5.1.5 | ColumnaviatRfuUnlicensed5G8Cap | read-only | current | Indicates that a 5.8GHz capable RFU is attached. This unit can operate across frequency ranges which are unlicensed in some markets. |
| 1.3.6.1.4.1.2509.9.5.2.5.1.6 | ColumnaviatRfuExternalCoaxPresent | read-only | current | Indicates if an external RF switch is present. |