MIB Viewer

AWC-VLAN-CFG-MIB

33 objects
Aironet products VLAN Configuration MIB.
OIDNameAccessStatusDescription
1.3.6.1.4.1.522.3.21IdentityawcVlanCfgMIBAironet products VLAN Configuration MIB.
1.3.6.1.4.1.522.3.21.1NodeawcVlanCfgObjects
1.3.6.1.4.1.522.3.21.1.1ScalarawcMaxVlanIdsread-onlycurrentThe Maximum number of discrete VLAN IDs supported. The VLAN IDs need not be consecutive.
1.3.6.1.4.1.522.3.21.1.2ScalarawcVlanEncapModeread-onlycurrentThe encapsulation mode setting controls transmit tagging logic for all ports. The value of this object is derived from other settings within the VLAN MIB.
1.3.6.1.4.1.522.3.21.1.3ScalarawcNativeVlanIdread-writecurrentNative VLAN ID for the device. The default Native VLAN ID is 0, for no VLAN ID. If the device is attached to an Ethernet bridge/switch VLAN port then a non-zer…
1.3.6.1.4.1.522.3.21.1.4ScalarawcVlanAllowEncryptedread-writecurrentWhen this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Cont…
1.3.6.1.4.1.522.3.21.1.5ScalarawcVlanAnyEnabledread-writecurrentWhen this attribute is true, VLAN operation of the system is enabled when any awcVlanEnabled value is true. When this attribute is false, VLAN operation is dis…
1.3.6.1.4.1.522.3.21.1.6TableawcVlanCfgTablenot-accessiblecurrentA table used for configuring and managing VLANS.
1.3.6.1.4.1.522.3.21.1.6.1RowawcVlanCfgEntrynot-accessiblecurrentVLAN table entry containing parameters for configuring and managing a particular VLAN.
1.3.6.1.4.1.522.3.21.1.6.1.1ColumnawcVlanIndexnot-accessiblecurrentVLAN ID to which the parameters in this conceptual row shall be applied. If 4095, the parameters in this conceptual row shall be applied to non-VLAN-tagged fra…
1.3.6.1.4.1.522.3.21.1.6.1.2ColumnawcVlanPolIdread-createcurrentDefault Policy Group Identifier for hosts occupying this VLAN.
1.3.6.1.4.1.522.3.21.1.6.1.3ColumnawcVlanEnabledread-createcurrentIf true, this VLAN is enabled on all trunk and hybrid ports. If false, this VLAN is disabled on all ports.
1.3.6.1.4.1.522.3.21.1.6.1.4ColumnawcVlanNUcastKeyRotationIntervalread-createcurrentWEP key rotation period. 0 indicates no key rotation.
1.3.6.1.4.1.522.3.21.1.6.1.5ColumnawcVlanRowStatusread-createcurrentUsed for creating/deleting conceptual rows in this table.
1.3.6.1.4.1.522.3.21.1.6.1.6ColumnawcVlanMicAlgorithmread-createcurrentAuxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations assigned to this VLAN. This object is not applicable for the reserved VLA…
1.3.6.1.4.1.522.3.21.1.6.1.7ColumnawcVlanWEPKeyPermuteAlgorithmread-createcurrentFunction through which the WEP encryption key is permuted between key renewal periods for stations assigned to this VLAN. This object is not applicable for the…
1.3.6.1.4.1.522.3.21.1.6.1.8ColumnawcVlanNameread-createcurrentDescriptive textual name for the VLAN.
1.3.6.1.4.1.522.3.21.1.6.1.9ColumnawcVlanDefaultUserPriorityread-createcurrentDesignation of the priority assigned to packets transmitted over this VLAN, if no other filter or classification rule has yet assigned a priority.
1.3.6.1.4.1.522.3.21.1.6.1.10ColumnawcVlanAlertread-createcurrentShould an alert be registered when a packet on this VLAN is observed?
1.3.6.1.4.1.522.3.21.1.7TableawcVlanNUcastKeyTablenot-accessiblecurrentDefault Shared WEP Keys for all 802.11 packets transmitted and received as non-VLAN-tagged frames over a port with the Port VLAN ID specified as awcVlanIndex. …
1.3.6.1.4.1.522.3.21.1.7.1RowawcVlanNUcastKeyEntrynot-accessiblecurrentAn entry in the awcVlanNUcastKeyTable table.
1.3.6.1.4.1.522.3.21.1.7.1.1ColumnawcVlanNUcastKeyIndexnot-accessiblecurrent802.11 WEP Key Index, + 1, used when transmitting or receiving frames with this key.
1.3.6.1.4.1.522.3.21.1.7.1.2ColumnawcVlanNUcastKeyLenread-writecurrentLength in octets of awcVlanNUcastKeyValue. Common values are 5 for 40-bit WEP and 13 for 128-bit WEP. A value of 0 means that the key is not set.
1.3.6.1.4.1.522.3.21.1.7.1.3ColumnawcVlanNUcastKeyValueread-writecurrentA WEP default secret key value. The value is write-only (attempt to read will result in return of zero-length string).
1.3.6.1.4.1.522.3.21.1.8ScalarawcVlanAllowUnencryptedVlanIdread-writecurrentSingle VLAN ID on which unencrypted packets are allowed. The default Unencrypted VLAN ID is 0, meaning that all VLANs require full encryption.
1.3.6.1.4.1.522.3.21.2NodeawcVlanCfgNotifications
1.3.6.1.4.1.522.3.21.3NodeawcVlanCfgConformance
1.3.6.1.4.1.522.3.21.3.1NodeawcVlanCfgCompliances
1.3.6.1.4.1.522.3.21.3.1.1ComplianceawcVlanCfgCompliancecurrentThe compliance statement for the awcVlanCfgMIB group.
1.3.6.1.4.1.522.3.21.3.2NodeawcVlanCfgGroups
1.3.6.1.4.1.522.3.21.3.2.1GroupawcVlanCfgObjectsGroupcurrent
Type Definitions
NameSyntaxStatusDescription
AwcVlanEncapTypeINTEGER { dot1qDisabled(1), dot1qPriority(2), dot1qHybrid(3), dot1qTrunk(4) }currentThe 802.1Q encapsulation mode. Valid values are: dot1qDisabled (1), Disabled dot1qPriority (2) 802.1Q Priority Tagging dot1qHybrid (3), 802.1Q VLAN Hybrid Trunk dot1qTrunk (4) 802.1Q VLAN Trunk The default value is norm…
AwcVlanIndexUnsigned32 (1..4095)currentA value used to index per-VLAN tables. Represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see AwcVlanId textual convention). The value 4095 indicates that the conceptual row applies to no…