AcGateway
1285 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5003.9.10.3 | IdentityacGateway | |||
| 1.3.6.1.4.1.5003.9.10.3.1 | NodegwConfiguration | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1 | Nodecommon | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.1 | NodechannelsSetting | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.1 | ScalarchannelsSettingSelectMode | read-write | current | Default method to use for trunk B-channel allocation (IP to Tel calls). Access: Instant. AC INI-Param: CHANNELSELECTMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21 | TablechannelsTable | not-accessible | current | The table defines trunk/hunt groups and phone numbers for gateway endpoints. The endpoints that aren�t defined will be disabled. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1 | RowchannelsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.1 | ColumnchannelsIndex | not-accessible | current | Channel numbers, starting at 0. AC INI-Param: TrunkGroup_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.2 | ColumnchannelsRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.3 | ColumnchannelsAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.4 | ColumnchannelsActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.5 | ColumnchannelsTrunkID | read-create | current | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_FirstTrunkId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.6 | ColumnchannelsStartingCh | read-create | current | Starting Channel for this trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_FirstBChannel |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.7 | ColumnchannelsLastCh | read-create | current | Last Channel for the trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_LastBChannel |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.8 | ColumnchannelsStartingPhoneNum | read-create | current | Starting Phone Number. Access: Instant. AC INI-Param: TrunkGroup_FirstPhoneNumber |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.9 | ColumnchannelsTrunkGroupID | read-create | current | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_TrunkGroupNum |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.10 | ColumnchannelsProfileID | read-create | current | Profile ID. Access: Instant. AC INI-Param: TrunkGroup_ProfileId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.11 | ColumnchannelsLastTrunkID | read-create | current | Last Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_LastTrunkId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.12 | ColumnchannelsModule | read-create | current | Channels Module. Access: Instant. AC INI-Param: TrunkGroup_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22 | TabletrunkGroupSettingsTable | not-accessible | current | The table defines trunk/hunt groups configuration |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1 | RowtrunkGroupSettingsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.1 | ColumntrunkGroupSettingsIndex | not-accessible | current | Trunk numbers, starting at 0. AC INI-Param: TrunkGroupSettings_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.2 | ColumntrunkGroupSettingsRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.3 | ColumntrunkGroupSettingsAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.4 | ColumntrunkGroupSettingsActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.5 | ColumntrunkGroupSettingsTrunkGroupID | read-create | current | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroupSettings_TrunkGroupId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.6 | ColumntrunkGroupSettingsChannelSelectMode | read-create | current | Selects the next available (free) Gateway port, FXO/PSTN: affects outgoing calls chanel selection FXS:affects incoming call channel selection. Access: Instant.… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.7 | ColumntrunkGroupSettingsRegistrationMode | read-create | current | Access: Instant. AC INI-Param: TrunkGroupSettings_RegistrationMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.8 | ColumntrunkGroupSettingsGatewayName | read-create | current | Access: Instant. AC INI-Param: TrunkGroupSettings_GatewayName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.9 | ColumntrunkGroupSettingsContactUser | read-create | current | Access: Instant. AC INI-Param: TrunkGroupSettings_ContactUser |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.10 | ColumntrunkGroupSettingsServingIPGroup | read-create | current | Access: Instant. AC INI-Param: TrunkGroupSettings_ServingIPGroup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.11 | ColumntrunkGroupSettingsMwiInterrogationType | read-create | current | Access: Instant. AC INI-Param: TrunkGroupSettings_MWIInterrogationType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2 | NodemanipulationAndRouting | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.1 | ScalarmanipulationAndRoutingModeTel2Ip | read-write | current | Defines order between routing incoming calls from Tel side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODETEL2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.2 | ScalarmanipulationAndRoutingModeIp2Tel | read-write | current | Defines order between routing incoming calls from IP side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODEIP2TEL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.3 | ScalarmanipulationAndRoutingFilterCalls2Ip | read-write | current | When Gatekeeper/Proxy is enabled, do not start session if called number is not listed or restricted in Tel to IP routing table. Access: Instant. AC INI-Param: … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.4 | ScalarmanipulationAndRoutingAltRoutingTel2IpEnable | read-write | current | Enable Tel to IP Alternative Routing. Can be enabled for status only without affecting routing. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPENABLE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.5 | ScalarmanipulationAndRoutingAltRoutingTel2IpMode | read-write | current | Methods used for Alternative Routing operation. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.6 | ScalarmanipulationAndRoutingAltRoutingTel2IpQosAllowTheNCall | read-write | current | in case of QOS problem, a call has this probability (in percents) to continue, in order to reevaluate the QOS. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPQ… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.7 | ScalarmanipulationAndRoutingPreferRouteTable | read-write | current | Prefer Routing Table. Access: Instant. AC INI-Param: PREFERROUTETABLE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.8 | ScalarmanipulationAndRoutingRedundantRoutingMode | read-write | current | Mode of redundant routing. 0 - Disabled, 1 - Use routing table, 2 - Use proxies list. Access: Instant. AC INI-Param: REDUNDANTROUTINGMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.9 | ScalarmanipulationAndRoutingAltRoutingTel2IpConnMethod | read-write | current | Tel to IP Alternative Routing Connectivity Method. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPCONNMETHOD |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.10 | ScalarmanipulationAndRoutingSIPReRoutingMode | read-write | current | Defines the routing mode after receiving 3xx response or transfer 0 - standard mode 1 - send invite to proxy 2 - use routing table. Access: Instant. AC INI-Par… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.11 | ScalarmanipulationAndRoutingAltRoutingToneDuration | read-write | current | Alternative Routing Tone Duration. 0 - disabled (milliseconds). Access: Instant. AC INI-Param: ALTROUTINGTONEDURATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.12 | ScalarmanipulationAndRoutingAltRoutingTel2IpKeepAliveTime | read-write | current | Time interval between OPTIONS Keep-Alive messages for IP connectivity (seconds). Access: Instant. AC INI-Param: ALTROUTINGTEL2IPKEEPALIVETIME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20 | Noderouting | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1 | Tabletel2IPRoutingTable | not-accessible | current | Phone prefix to IP address routing table. The table is used for routing incoming PSTN to IP calls, if Gatekeeper is not used. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1 | Rowtel2IPRoutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.1 | Columntel2IPRoutingIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: PREFIX_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.2 | Columntel2IPRoutingRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.3 | Columntel2IPRoutingAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.4 | Columntel2IPRoutingActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.5 | Columntel2IPRoutingPrefix | read-create | current | Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.6 | Columntel2IPRoutingAddress | read-create | current | Address (IP or DNS name). Access: Instant. AC INI-Param: PREFIX_DestAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.7 | Columntel2IPRoutingSrcPrefix | read-create | current | Calling Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.8 | Columntel2IPRoutingProfileID | read-create | current | Profile ID. Access: Instant. AC INI-Param: PREFIX_ProfileId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.9 | Columntel2IPRoutingChargeCode | read-create | current | Charge code to use for generating metering tones. Access: Instant. AC INI-Param: PREFIX_MeteringCode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.10 | Columntel2IPRoutingDestPort | read-create | current | Destination port. Access: Instant. AC INI-Param: PREFIX_DestPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.11 | Columntel2IPRoutingSourceIPGroupID | read-create | current | Access: Instant. AC INI-Param: PREFIX_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.12 | Columntel2IPRoutingDestHostPrefix | read-create | current | Access: Instant. AC INI-Param: PREFIX_DestHostPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.13 | Columntel2IPRoutingDestIPGroupID | read-create | current | Access: Instant. AC INI-Param: PREFIX_DestIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.14 | Columntel2IPRoutingSourceHostPrefix | read-create | current | Access: Instant. AC INI-Param: PREFIX_SrcHostPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.15 | Columntel2IPRoutingTransportType | read-create | current | Access: Instant. AC INI-Param: PREFIX_TransportType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.16 | Columntel2IPRoutingSourceTrunkGroupID | read-create | current | Access: Instant. AC INI-Param: PREFIX_SrcTrunkGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2 | TableiP2TelRoutingTable | not-accessible | current | Phone prefix to Trunk group (or Hunt Group for MP-1xx)routing table. The table is used for routing outgoing IP Telco calls, according to received from IP desti… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1 | RowiP2TelRoutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.1 | ColumniP2TelRoutingIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: PstnPrefix_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.2 | ColumniP2TelRoutingRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.3 | ColumniP2TelRoutingAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.4 | ColumniP2TelRoutingActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.5 | ColumniP2TelRoutingPrefix | read-create | current | Phone number prefix. up to 80 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_DestPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.6 | ColumniP2TelRoutingTrunkGroupID | read-create | current | Trunk/Hunt group ID. Access: Instant. AC INI-Param: PstnPrefix_TrunkGroupId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.7 | ColumniP2TelRoutingSrcPrefix | read-create | current | Calling Phone number prefix. up to 49 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.8 | ColumniP2TelRoutingAddress | read-create | current | Address (IP or DNS name). Access: Instant. AC INI-Param: PstnPrefix_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.9 | ColumniP2TelRoutingProfileID | read-create | current | Profile ID. Access: Instant. AC INI-Param: PstnPrefix_ProfileId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.10 | ColumniP2TelRoutingSourceIPGroupID | read-create | current | Access: Instant. AC INI-Param: PstnPrefix_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.11 | ColumniP2TelRoutingDestHostPrefix | read-create | current | Access: Instant. AC INI-Param: PstnPrefix_DestHostPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.12 | ColumniP2TelRoutingSourceHostPrefix | read-create | current | Access: Instant. AC INI-Param: PstnPrefix_SrcHostPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3 | TablednsInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1 | RowdnsInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.1 | ColumndnsInfoIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: Dns2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.2 | ColumndnsInfoRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.3 | ColumndnsInfoAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.4 | ColumndnsInfoActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.5 | ColumndnsInfoDomainName | read-create | current | Domain Name. Access: Instant. AC INI-Param: Dns2Ip_DomainName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.6 | ColumndnsInfoFirstIPAddress | read-create | current | IP Address. Access: Instant. AC INI-Param: Dns2Ip_FirstIpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.7 | ColumndnsInfoSecondIPAddress | read-create | current | IP Address. Access: Instant. AC INI-Param: Dns2Ip_SecondIpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.8 | ColumndnsInfoThirdIPAddress | read-create | current | IP Address. Access: Instant. AC INI-Param: Dns2Ip_ThirdIpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.9 | ColumndnsInfoFourthIPAddress | read-create | current | IP Address. Access: Instant. AC INI-Param: Dns2Ip_FourthIpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4 | TablesrvInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1 | RowsrvInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.1 | ColumnsrvInfoIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: Srv2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.2 | ColumnsrvInfoRecordNum | not-accessible | current | Equals to the entry number. AC INI-Param: Srv2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.3 | ColumnsrvInfoRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.4 | ColumnsrvInfoAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.5 | ColumnsrvInfoActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.6 | ColumnsrvInfoInternalDomainName | read-create | current | the Domain name for the SRV query. Access: Instant. AC INI-Param: Srv2Ip_InternalDomain |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.7 | ColumnsrvInfoTransportType | read-create | current | the transport type. Access: Instant. AC INI-Param: Srv2Ip_TransportType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.8 | ColumnsrvInfoDNSName | read-create | current | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.9 | ColumnsrvInfoPriority | read-create | current | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.10 | ColumnsrvInfoWeight | read-create | current | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.11 | ColumnsrvInfoPort | read-create | current | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.12 | ColumnsrvInfoDNSName2 | read-create | current | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.13 | ColumnsrvInfoPriority2 | read-create | current | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.14 | ColumnsrvInfoWeight2 | read-create | current | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.15 | ColumnsrvInfoPort2 | read-create | current | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.16 | ColumnsrvInfoDNSName3 | read-create | current | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.17 | ColumnsrvInfoPriority3 | read-create | current | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.18 | ColumnsrvInfoWeight3 | read-create | current | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.19 | ColumnsrvInfoPort3 | read-create | current | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5 | TableforwardOnBusyTrunkDestTable | not-accessible | current | GwApp Forward On Busy Trunk Destination Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1 | RowforwardOnBusyTrunkDestEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.1 | ColumnforwardOnBusyTrunkDestIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: ForwardOnBusyTrunkDest_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.2 | ColumnforwardOnBusyTrunkDestRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.3 | ColumnforwardOnBusyTrunkDestAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.4 | ColumnforwardOnBusyTrunkDestActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.5 | ColumnforwardOnBusyTrunkDestTrunkGroupId | read-create | current | GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_TrunkGroupId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.6 | ColumnforwardOnBusyTrunkDestForwardDestination | read-create | current | GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_ForwardDestination |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10 | NodealtRouteCause | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21 | TablealtRouteCauseIP2TELTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1 | RowaltRouteCauseIP2TELEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.1 | ColumnaltRouteCauseIP2TELIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: AltRouteCauseIp2Tel_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.2 | ColumnaltRouteCauseIP2TELRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.3 | ColumnaltRouteCauseIP2TELAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.4 | ColumnaltRouteCauseIP2TELActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.5 | ColumnaltRouteCauseIP2TELReleaseCause | read-create | current | Release Cause. Access: Instant. AC INI-Param: AltRouteCauseIp2Tel_ReleaseCause |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22 | TablealtRouteCauseTEL2IPTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1 | RowaltRouteCauseTEL2IPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.1 | ColumnaltRouteCauseTEL2IPIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: AltRouteCauseTel2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.2 | ColumnaltRouteCauseTEL2IPRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.3 | ColumnaltRouteCauseTEL2IPAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.4 | ColumnaltRouteCauseTEL2IPActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.5 | ColumnaltRouteCauseTEL2IPReleaseCause | read-create | current | Release Cause. Access: Instant. AC INI-Param: AltRouteCauseTel2Ip_ReleaseCause |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.21 | ScalarroutingEnableDigitDelivery2IP | read-write | current | Enable automatic digit delivery to IP side after call is connected. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.22 | ScalarroutingSourceIPAddressInput | read-write | current | Decides the origin of the source ip address looked at when routing using the IP 0 - Contact 1 - Recieved packet source IP address. Access: Instant. AC INI-Para… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21 | Nodemanipulation | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.1 | ScalarmanipulationRemovePrefix | read-write | current | Remove prefix defined in IP to Trunk Group table (IP to Tel calls). Access: Instant. AC INI-Param: REMOVEPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.2 | ScalarmanipulationAddTrunkGroupAsPrefix | read-write | current | Add Trunk Group ID on which the call was received as the called number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.3 | ScalarmanipulationAddPortAsPrefix | read-write | current | Add port number (Analog gateway) / Trunk ID (Digital gateway) as called number prefix. Access: Instant. AC INI-Param: ADDPORTASPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.4 | ScalarmanipulationReplaceEmptyDstWithPortNumber | read-write | current | Replace empty destination number (received from Tel side) with port number. Access: Instant. AC INI-Param: REPLACEEMPTYDSTWITHPORTNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.5 | ScalarmanipulationCIDNotification | read-write | current | If NO PRESENTATION arrived from PSTN and this parameter enabled,than the presentation will be allowed. If this parameter disabled, the, presentation will be re… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.6 | ScalarmanipulationUseSourceNumberAsDisplayName | read-write | current | if set to 1 Use source number as display name if empty. if set to 2 always use source number as display name . Access: Instant. AC INI-Param: USESOURCENUMBERAS… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.7 | ScalarmanipulationAddNPIandTON2CalledNumber | read-write | current | Add NPI and TON as prefix to called number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLEDNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.8 | ScalarmanipulationAddNPIandTON2CallingNumber | read-write | current | Add NPI and TON as prefix to calling number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLINGNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.9 | ScalarmanipulationUseDisplayNameAsSourceNumber | read-write | current | when set to 1 then If display name exists, use it as source number. If not, set presentation as restricted. Access: Instant. AC INI-Param: USEDISPLAYNAMEASSOUR… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.10 | ScalarmanipulationAddPrefixToRedirectNumber | read-write | current | Prefix which added to redirect phone number. Access: Instant. AC INI-Param: PREFIX2REDIRECTNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.11 | ScalarmanipulationAddPhoneContextAsPrefix | read-write | current | add the phone context to src/dest phone number as prefix. Access: Instant. AC INI-Param: ADDPHONECONTEXTASPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.12 | ScalarmanipulationBlindTransferAddPrefix | read-write | current | Add keying sequence for performing blind transfer as transfer number prefix. Access: Instant. AC INI-Param: KEYBLINDTRANSFERADDPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.13 | ScalarmanipulationSourceMode | read-write | current | Describes the headers containing source number after manipulation: (0) both FROM and P-Asserted contain src number after manipulations (1) only FROM contains s… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.14 | ScalarmanipulationAddTrunkGroupAsPrefixToSource | read-write | current | Add Trunk Group ID on which the call was received as the calling number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIXTOSOURCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.15 | ScalarmanipulationSetTel2IpRedirectReason | read-write | current | If redirect (diversion) data is received from the PSTN interface, the redirect reason is set to the value of this parameter, before transferring it to the IP. … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.16 | ScalarmanipulationSetIp2TelRedirectReason | read-write | current | If redirect (diversion) data is received from the IP side, the redirect reason is set to the value of this parameter, before transferring it to the PSTN interf… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.17 | ScalarmanipulationSetIp2TelRedirectScreeningIndicator | read-write | current | Override screening indicator value of the redirect number in Setup messages to PSTN interface. Access: Instant. AC INI-Param: SetIp2TelRedirectScreeningInd |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21 | TabledstIP2TELTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1 | RowdstIP2TELEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.1 | ColumndstIP2TELIndex | not-accessible | current | Destination number, starting at 0. AC INI-Param: NumberMapIp2Tel_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.2 | ColumndstIP2TELRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.3 | ColumndstIP2TELAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.4 | ColumndstIP2TELActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.5 | ColumndstIP2TELPrefix | read-create | current | Access: Instant. AC INI-Param: NumberMapIp2Tel_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.6 | ColumndstIP2TELNumOfStrippedDigits | read-create | current | Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.7 | ColumndstIP2TELPrefixToAdd | read-create | current | Prefix to Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.8 | ColumndstIP2TELNumOfDigitsToLeave | read-create | current | Number of digits to leave. Access: Instant. AC INI-Param: NumberMapIp2Tel_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.9 | ColumndstIP2TELNumberPlan | read-create | current | Number Plan. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.10 | ColumndstIP2TELNumberType | read-create | current | Number Type. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.11 | ColumndstIP2TELSourcePrefix | read-create | current | Source Prefix. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.12 | ColumndstIP2TELSourceIP | read-create | current | Source IP. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.13 | ColumndstIP2TELNumOfDigitsToRemFromRight | read-create | current | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.14 | ColumndstIP2TELSuffix2Add | read-create | current | Suffix To Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.15 | ColumndstIP2TELIsPresentationRestricted | read-create | current | Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapIp2Tel_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22 | TabledstTEL2IPTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1 | RowdstTEL2IPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.1 | ColumndstTEL2IPIndex | not-accessible | current | Destination number, starting at 0. AC INI-Param: NumberMapTel2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.2 | ColumndstTEL2IPRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.3 | ColumndstTEL2IPAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.4 | ColumndstTEL2IPActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.5 | ColumndstTEL2IPPrefix | read-create | current | Access: Instant. AC INI-Param: NumberMapTel2Ip_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.6 | ColumndstTEL2IPNumOfStrippedDigits | read-create | current | Num of stripped digits. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.7 | ColumndstTEL2IPPrefixToAdd | read-create | current | Prefix to Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.8 | ColumndstTEL2IPNumOfDigitsToLeave | read-create | current | Number of digits to leave. Access: Instant. AC INI-Param: NumberMapTel2Ip_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.9 | ColumndstTEL2IPNumberPlan | read-create | current | Number Plan. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.10 | ColumndstTEL2IPNumberType | read-create | current | Number Type. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.11 | ColumndstTEL2IPSourcePrefix | read-create | current | Access: Instant. AC INI-Param: NumberMapTel2Ip_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.12 | ColumndstTEL2IPNumOfDigitsToRemFromRight | read-create | current | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.13 | ColumndstTEL2IPSuffix2Add | read-create | current | Suffix To Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.14 | ColumndstTEL2IPIsPresentationRestricted | read-create | current | Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapTel2Ip_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.15 | ColumndstTEL2IPSourceIPAddress | read-create | current | Source Address. Access: Instant. AC INI-Param: NumberMapTel2Ip_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.16 | ColumndstTEL2IPSourceTrunkGroupID | read-create | current | GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcTrunkGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.17 | ColumndstTEL2IPSourceIPGroupID | read-create | current | GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23 | TablesrcIP2TELTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1 | RowsrcIP2TELEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.1 | ColumnsrcIP2TELIndex | not-accessible | current | Source number, starting at 0. AC INI-Param: SourceNumberMapIp2Tel_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.2 | ColumnsrcIP2TELRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.3 | ColumnsrcIP2TELAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.4 | ColumnsrcIP2TELActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.5 | ColumnsrcIP2TELPrefix | read-create | current | Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.6 | ColumnsrcIP2TELNumOfStrippedDigits | read-create | current | Num of stripped digits. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.7 | ColumnsrcIP2TELPrefixToAdd | read-create | current | Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.8 | ColumnsrcIP2TELNumOfDigitsToLeave | read-create | current | Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.9 | ColumnsrcIP2TELNumberPlan | read-create | current | Number Plan. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.10 | ColumnsrcIP2TELNumberType | read-create | current | Number Type. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.11 | ColumnsrcIP2TELDestPrefix | read-create | current | Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.12 | ColumnsrcIP2TELPresentation | read-create | current | Presentation. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.13 | ColumnsrcIP2TELNumOfDigitsToRemFromRight | read-create | current | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.14 | ColumnsrcIP2TELSuffix2Add | read-create | current | Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.15 | ColumnsrcIP2TELSourceIPAddress | read-create | current | Source Address. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24 | TablesrcTEL2IPTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1 | RowsrcTEL2IPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.1 | ColumnsrcTEL2IPIndex | not-accessible | current | Source number, starting at 0. AC INI-Param: SourceNumberMapTel2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.2 | ColumnsrcTEL2IPRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.3 | ColumnsrcTEL2IPAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.4 | ColumnsrcTEL2IPActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.5 | ColumnsrcTEL2IPPrefix | read-create | current | Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.6 | ColumnsrcTEL2IPNumOfStrippedDigits | read-create | current | Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.7 | ColumnsrcTEL2IPPrefixToAdd | read-create | current | Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.8 | ColumnsrcTEL2IPNumOfDigitsToLeave | read-create | current | Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.9 | ColumnsrcTEL2IPNumberPlan | read-create | current | Number Plan. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.10 | ColumnsrcTEL2IPNumberType | read-create | current | Number Type. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.11 | ColumnsrcTEL2IPDestPrefix | read-create | current | Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.12 | ColumnsrcTEL2IPPresentation | read-create | current | Presentation. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.13 | ColumnsrcTEL2IPNumOfDigitsToRemFromRight | read-create | current | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.14 | ColumnsrcTEL2IPSuffix2Add | read-create | current | Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.15 | ColumnsrcTEL2IPSourceIPAddress | read-create | current | Source Address. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.16 | ColumnsrcTEL2IPSourceTrunkGroupID | read-create | current | GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcTrunkGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.17 | ColumnsrcTEL2IPSourceIPGroupID | read-create | current | GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25 | TablephoneContextTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1 | RowphoneContextEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.1 | ColumnphoneContextIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: PhoneContext_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.2 | ColumnphoneContextRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.3 | ColumnphoneContextAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.4 | ColumnphoneContextActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.5 | ColumnphoneContextNPI | read-create | current | Number Plan. Access: Instant. AC INI-Param: PhoneContext_Npi |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.6 | ColumnphoneContextTON | read-create | current | Number Type. Access: Instant. AC INI-Param: PhoneContext_Ton |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.7 | ColumnphoneContextPhoneContext | read-create | current | Phone-Context. Access: Instant. AC INI-Param: PhoneContext_Context |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26 | TableredirectNumberMapIp2TelTable | not-accessible | current | GwApp IP-to-Tel Redirect Phone Number Manipulation Rules Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1 | RowredirectNumberMapIp2TelEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.1 | ColumnredirectNumberMapIp2TelIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: RedirectNumberMapIp2Tel_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.2 | ColumnredirectNumberMapIp2TelRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.3 | ColumnredirectNumberMapIp2TelAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.4 | ColumnredirectNumberMapIp2TelActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.5 | ColumnredirectNumberMapIp2TelDestinationPrefix | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.6 | ColumnredirectNumberMapIp2TelRedirectPrefix | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RedirectPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.7 | ColumnredirectNumberMapIp2TelSourceAddress | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.8 | ColumnredirectNumberMapIp2TelNumberType | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.9 | ColumnredirectNumberMapIp2TelNumberPlan | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.10 | ColumnredirectNumberMapIp2TelRemoveFromLeft | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.11 | ColumnredirectNumberMapIp2TelRemoveFromRight | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.12 | ColumnredirectNumberMapIp2TelLeaveFromRight | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.13 | ColumnredirectNumberMapIp2TelPrefixToAdd | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.14 | ColumnredirectNumberMapIp2TelSuffixToAdd | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.15 | ColumnredirectNumberMapIp2TelIsPresentationRestricted | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.16 | ColumnredirectNumberMapIp2TelSrcTrunkGroupID | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcTrunkGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.17 | ColumnredirectNumberMapIp2TelSrcIPGroupID | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27 | TableredirectNumberMapTel2IpTable | not-accessible | current | GwApp Tel-to-IP Redirect Phone Number Manipulation Rules Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1 | RowredirectNumberMapTel2IpEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.1 | ColumnredirectNumberMapTel2IpIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: RedirectNumberMapTel2Ip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.2 | ColumnredirectNumberMapTel2IpRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.3 | ColumnredirectNumberMapTel2IpAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.4 | ColumnredirectNumberMapTel2IpActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.5 | ColumnredirectNumberMapTel2IpDestinationPrefix | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_DestinationPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.6 | ColumnredirectNumberMapTel2IpRedirectPrefix | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RedirectPrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.7 | ColumnredirectNumberMapTel2IpSourceAddress | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SourceAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.8 | ColumnredirectNumberMapTel2IpNumberType | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.9 | ColumnredirectNumberMapTel2IpNumberPlan | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.10 | ColumnredirectNumberMapTel2IpRemoveFromLeft | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.11 | ColumnredirectNumberMapTel2IpRemoveFromRight | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.12 | ColumnredirectNumberMapTel2IpLeaveFromRight | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.13 | ColumnredirectNumberMapTel2IpPrefixToAdd | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.14 | ColumnredirectNumberMapTel2IpSuffixToAdd | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.15 | ColumnredirectNumberMapTel2IpIsPresentationRestricted | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_IsPresentationRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.16 | ColumnredirectNumberMapTel2IpSrcTrunkGroupID | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcTrunkGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.17 | ColumnredirectNumberMapTel2IpSrcIPGroupID | read-create | current | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.22 | NodeconnectivityQos | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.1 | ScalarconnectivityQosMaxAllowedPL | read-write | current | The maximum percentage of packet loss that will not prevent normal routing. Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDPL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.2 | ScalarconnectivityQosMaxAllowedDelay | read-write | current | The maximum delay that will not prevent normal routing (msec). Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDDELAY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.3 | ScalarconnectivityQosEffectivePeriod | read-write | current | if during this period [in seconds], no updated qos info received, theold qos info is discarded. if qos poor, and no calls alowed, after this period, calls will… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.4 | ScalarconnectivityQosSamplesToAvarage | read-write | current | number of samples to avarage. in other words define the weiught of the new sample. Access: Instant. AC INI-Param: IPCONNQOSSAMPLESTOAVARAGE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3 | NodedigitalGW | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.1 | ScalardigitalGWBChannelNegotiation | read-write | current | ISDN B-Channel negotiation mode. Access: Instant. AC INI-Param: BCHANNELNEGOTIATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.2 | ScalardigitalGWSwapRedirectNumber | read-write | current | Swap Redirect and Called numbers. Access: Instant. AC INI-Param: SWAPREDIRECTNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.3 | ScalardigitalGWEnableTransferCap | read-write | current | Select Transfer Capabilities method between H.323/Q.931 and ISDN/Q.931. Access: Instant. AC INI-Param: ENABLETRANSFERCAP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.4 | ScalardigitalGWR2Category | read-write | current | MFC\R2 Calling Party's category. Access: Instant. AC INI-Param: R2CATEGORY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.5 | ScalardigitalGWISDNRxOverlap | read-write | obsolete | Enable reception of overlap dialing from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.6 | ScalardigitalGWCASSendHookFlash | read-write | current | 0 (default): Hookflash not forwarded 1:HookFlash forwarded - Testing. Access: Instant. AC INI-Param: CASSENDHOOKFLASH |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.7 | ScalardigitalGWISDNTransferCapability | read-write | obsolete | Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPA… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.8 | ScalardigitalGWEnableTDMOverIp | read-write | current | Enable gateway to maintain a permanent RTP connection. Access: Offline. AC INI-Param: ENABLETDMOVERIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.9 | ScalardigitalGWTransparentCoderOnDataCall | read-write | current | In case the transfer capability of a call from ISDN is data open with transparent coder. Access: Instant. AC INI-Param: TRANSPARENTCODERONDATACALL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.10 | ScalardigitalGWSupportRedirectInFacility | read-write | current | Search for redirect number in facility IE. Access: Instant. AC INI-Param: SUPPORTREDIRECTINFACILITY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.11 | ScalardigitalGWPIForDisconnectMsg | read-write | obsolete | Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.12 | ScalardigitalGWConnectOnProgressInd | read-write | current | FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: CONNECTONPROGRESSIND |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.13 | ScalardigitalGWLocalISDNRBSource | read-write | obsolete | If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.14 | ScalardigitalGWEnableUuiTel2Ip | read-write | current | Enable User-User IE to pass in Setup from ISDN to IP. Access: Instant. AC INI-Param: ENABLEUUITEL2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.15 | ScalardigitalGWEnableUuiIp2Tel | read-write | current | Enable User-User IE to pass in Setup from IP to ISDN. Access: Instant. AC INI-Param: ENABLEUUIIP2TEL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.16 | ScalardigitalGWSendISDNTransferOnConnect | read-write | current | Send TBCT/ECT/RLT request only when second leg call is connected. Access: Instant. AC INI-Param: SENDISDNTRANSFERONCONNECT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.17 | ScalardigitalGWEnableISDNTunnelingTel2Ip | read-write | current | Enable ISDN tunneling to pass Setup and Facility messages from ISDN to IP. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGTEL2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.18 | ScalardigitalGWEnableISDNTunnelingIp2Tel | read-write | current | Enable ISDN tunneling to pass Setup and Facility messages from IP to ISDN. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGIP2TEL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.19 | ScalardigitalGWEnableCallingPartyCategory | read-write | current | Enables NI2 calling party category translation to SIP. Access: Instant. AC INI-Param: ENABLECALLINGPARTYCATEGORY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.20 | NodeiE | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.1 | ScalariEAddIEInSetup | read-write | current | Additional information element to send in ISDN Setup message. Access: Instant. AC INI-Param: ADDIEINSETUP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.2 | ScalariESendIEOnTG | read-write | current | Configure trunk groups on which to send additional IE. Access: Instant. AC INI-Param: SENDIEONTG |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.21 | TableiSDNRxOverlapTable | not-accessible | current | Choose either: Disabled or Enabled (default). Any number bigger than one = Number of digits to receive. Note 1: If enabled, the Mediant 2000 receives ISDN call… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1 | RowiSDNRxOverlapEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.1 | ColumniSDNRxOverlapIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.2 | ColumniSDNRxOverlapEnable | read-write | current | Receive overlap from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.22 | TabletrunkTransferTable | not-accessible | current | Trunk Transfer Mode table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1 | RowtrunkTransferEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.1 | ColumntrunkTransferIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.2 | ColumntrunkTransferMode | read-write | current | The type of transfer the PSTN/PBX supports. Access: Instant. AC INI-Param: TRUNKTRANSFERMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.23 | TableprogressIndicatorToISDNTable | not-accessible | current | Progress Indicator To ISDN table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1 | RowprogressIndicatorToISDNEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.1 | ColumnprogressIndicatorToISDNIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.2 | ColumnprogressIndicatorToISDNValue | read-write | current | Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.24 | TableplayRBToneToTrunkTable | not-accessible | current | Play RB Tone To Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1 | RowplayRBToneToTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.1 | ColumnplayRBToneToTrunkIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.2 | ColumnplayRBToneToTrunkValue | read-write | current | Enable ringback tone playing towards trunk side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TRUNK |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.25 | TableiSDNTransferCapabilityTable | not-accessible | current | ISDN Transfer Capability Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1 | RowiSDNTransferCapabilityEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.1 | ColumniSDNTransferCapabilityIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.2 | ColumniSDNTransferCapabilityValue | read-write | current | Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPA… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.26 | TablelocalISDNRBSourceTable | not-accessible | current | Play RB Tone To Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1 | RowlocalISDNRBSourceEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.1 | ColumnlocalISDNRBSourceIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.2 | ColumnlocalISDNRBSourceValue | read-write | current | If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.27 | TablepIForDisconnectMsgTable | not-accessible | current | PI For Disconnect Message Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1 | RowpIForDisconnectMsgEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.1 | ColumnpIForDisconnectMsgIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.2 | ColumnpIForDisconnectMsgValue | read-write | current | Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.28 | TablepSTNAlertTimeoutTable | not-accessible | current | PSTN Alert Timeout |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1 | RowpSTNAlertTimeoutEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.1 | ColumnpSTNAlertTimeoutIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.2 | ColumnpSTNAlertTimeoutValue | read-write | current | Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: TRUNKPSTNALERTTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29 | Nodemlpp | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.1 | ScalarmlppCallPriorityMode | read-write | current | Priority mode: 0-disable 1-MLPP. Access: Instant. AC INI-Param: CALLPRIORITYMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.2 | ScalarmlppDefaultNamespace | read-write | current | MLPP Default Namespace. Access: Instant. AC INI-Param: MLPPDEFAULTNAMESPACE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.3 | ScalarmlppDefaultCallPriority | read-write | current | SIP Default Call Priority. Access: Instant. AC INI-Param: SIPDEFAULTCALLPRIORITY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.4 | ScalarmlppDiffServ | read-write | current | DiffServ value for MLPP calls. Access: Instant. AC INI-Param: MLPPDIFFSERV |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.5 | ScalarmlppPreemptionToneDuration | read-write | current | Preemption Tone Duration, 0-60 seconds. Access: Instant. AC INI-Param: PreemptionToneDuration |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.6 | ScalarmlppDefaultServiceDomain | read-write | current | MLPP Default Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPDefaultServiceDomain |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.7 | ScalarmlppNormalizedServiceDomain | read-write | current | MLPP Normalized Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPNormalizedServiceDomain |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.8 | ScalarmlppRoutineRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Routine call. Access: Instant. AC INI-Param: MLPPROUTINERTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.9 | ScalarmlppPriorityRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Priority call. Access: Instant. AC INI-Param: MLPPPRIORITYRTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.10 | ScalarmlppImmediateRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Immediate call. Access: Instant. AC INI-Param: MLPPIMMEDIATERTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.11 | ScalarmlppFlashRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Flash call. Access: Instant. AC INI-Param: MLPPFLASHRTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.12 | ScalarmlppFlashOverRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Flash-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVERRTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.13 | ScalarmlppFlashOverOverRTPDSCP | read-write | current | Defines the RTP DSCP for MLPP Flash-Override-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVEROVERRTPDSCP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.14 | ScalarmlppE911Behavior | read-write | current | Defines the MLPP E911 Preemption mode: (0)-Standard Mode (ets calls will have the highest priority and can preemt any mlpp call), (1)-Treat as routine mode (et… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.3.40 | ScalardigitalGWPlayRBTOnISDNTransfer | read-write | current | Play local RBT on TBCT/ECT/RLT transfer. Access: Instant. AC INI-Param: PLAYRBTONISDNTRANSFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4 | NodeanalogGW | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.1 | ScalaranalogGWEnableReversalPolarity | read-write | current | FXO: CONNECT/DISCONNECT calls upon detection of polarity signal. FXS: generate the signal. Access: Instant. AC INI-Param: ENABLEREVERSALPOLARITY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.2 | ScalaranalogGWEnableCurrentDisconnect | read-write | current | Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: ENABLECURRENTDISCONNECT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.3 | ScalaranalogGWRegretTime | read-write | current | Time to wait between phone hang up and call termination. Access: Instant. AC INI-Param: REGRETTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.4 | ScalaranalogGWHotLineToneDuration | read-write | current | Duration of played hotline tone, after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: HOTLINETONEDURATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10 | Nodefxs | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.1 | ScalarfxsCutThrough | read-write | current | Enable call connection without On-Hook/Off-Hook process 'Cut-Through'. Access: Instant. AC INI-Param: CUTTHROUGH |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.2 | ScalarfxsMeteringMode | read-write | current | Method of automatic generation of payphone metering pulses. Access: Instant. AC INI-Param: PAYPHONEMETERINGMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.3 | ScalarfxsFXSOOSBehavior | read-write | current | FxsOosBehavior control how the fxs endpoints of a gateway, will behave in case of Out of Service. OutofService state may be result of two scenarios: a. EndPoin… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.4 | ScalarfxsSetOOSOnRegistrationFail | read-write | current | Should deactivate endpoint service on registration failure. Access: Instant. AC INI-Param: OOSONREGISTRATIONFAIL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21 | TablechargeCodesTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1 | RowchargeCodesEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.1 | ColumnchargeCodesIndex | not-accessible | current | Charge code index. AC INI-Param: ChargeCode_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.2 | ColumnchargeCodesRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.3 | ColumnchargeCodesAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.4 | ColumnchargeCodesActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.5 | ColumnchargeCodesPeriod1EndTime | read-create | current | Access: Instant. AC INI-Param: ChargeCode_EndTime1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.6 | ColumnchargeCodesPeriod1PulseInterval | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulseInterval1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.7 | ColumnchargeCodesPeriod1PulsesOnAnswer | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer1 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.8 | ColumnchargeCodesPeriod2EndTime | read-create | current | Access: Instant. AC INI-Param: ChargeCode_EndTime2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.9 | ColumnchargeCodesPeriod2PulseInterval | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulseInterval2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.10 | ColumnchargeCodesPeriod2PulsesOnAnswer | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer2 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.11 | ColumnchargeCodesPeriod3EndTime | read-create | current | Access: Instant. AC INI-Param: ChargeCode_EndTime3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.12 | ColumnchargeCodesPeriod3PulseInterval | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulseInterval3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.13 | ColumnchargeCodesPeriod3PulsesOnAnswer | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer3 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.14 | ColumnchargeCodesPeriod4EndTime | read-create | current | Access: Instant. AC INI-Param: ChargeCode_EndTime4 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.15 | ColumnchargeCodesPeriod4PulseInterval | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulseInterval4 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.16 | ColumnchargeCodesPeriod4PulsesOnAnswer | read-create | current | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer4 |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22 | TabletoneIndexTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1 | RowtoneIndexEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.1 | ColumntoneIndexIndex | not-accessible | current | Charge code index. AC INI-Param: ToneIndex_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.2 | ColumntoneIndexRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.3 | ColumntoneIndexAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.4 | ColumntoneIndexActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.5 | ColumntoneIndexFXSPortFirst | read-create | current | Staring Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_First |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.6 | ColumntoneIndexFXSPortLast | read-create | current | End Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_Last |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.7 | ColumntoneIndexSourcePrefix | read-create | current | Source Prefix. Access: Instant. AC INI-Param: ToneIndex_SourcePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.8 | ColumntoneIndexPriorityIndex | read-create | current | Index used for distinctive ringing and call waiting tones. Access: Instant. AC INI-Param: ToneIndex_PriorityIndex |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11 | Nodefxo | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.1 | ScalarfxoIsTwoStageDial | read-write | current | Dialing Mode - One-Stage (PBX Pass-thru) or Two-Stage. Access: Instant. AC INI-Param: ISTWOSTAGEDIAL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.2 | ScalarfxoWaitForDialTone | read-write | current | Wait for dial tone before initiating an outgoing call to PBX/PSTN (FXO one-stage dialing mode). Access: Instant. AC INI-Param: ISWAITFORDIALTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.3 | ScalarfxoWaitForDialTime | read-write | current | Time delay between seizing the line and start dialing (if ISWAITFORDIALTONE disabled) or after hookflash before dialing. Access: Instant. AC INI-Param: WAITFOR… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.4 | ScalarfxoBetweenRingTime | read-write | current | Timeout for releasing FXO to IP call, if FXO port doesn't detect ringing signal for this timeout. Access: Instant. AC INI-Param: FXOBETWEENRINGTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.5 | ScalarfxoEnableVoiceDetection | read-write | current | On FXO GWs enables sending of connect/200 OK message on speech/fax/modem detection [default 0]. In order to activate feature DSPVersionTemplateNumber should be… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.6 | ScalarfxoRingsBeforeCallerID | read-write | current | Number of rings after which the Caller ID is detected. Access: Instant. AC INI-Param: RINGSBEFORECALLERID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.7 | ScalarfxoGuardTimeBetweenCalls | read-write | current | Only for FXO: the time between the time that the EP execute OnHook, to the time that this EP is capable to except new IP2TEL call (and execute OfHook). Access:… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.8 | ScalarfxoAutoDialPlayBusyTone | read-write | current | Only for FXO, Tel2IP calls: If enable (1) - On receiving release, if autodial is used, the FXO seize the line and play Busy/Reorder tone toward the PSTN for Re… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12 | Nodedialing | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.1 | ScalardialingMaxDigits | read-write | current | Maximum number of digits before dialing starts. Access: Instant. AC INI-Param: MAXDIGITS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.2 | ScalardialingTimeBetweenDigits | read-write | current | Timeout in seconds between dialed digits. Access: Instant. AC INI-Param: TIMEBETWEENDIGITS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.3 | ScalardialingIsSpecialDigits | read-write | current | When disabled, pressing special digits (* or #) will terminate digit collection. When enabled, special digits can be received as part of the dialed number or E… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.4 | ScalardialingDigitMapping | read-write | current | The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Access: Instant. AC INI-Param: DIGITMAPPING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.5 | ScalardialingEnableDigitDelivery | read-write | current | Enable automatic digit delivery to Tel side after line is off-hooked or seized. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.6 | ScalardialingDialPlanIndex | read-write | current | Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: DIALPLANINDEX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21 | TableautoDialTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1 | RowautoDialEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.1 | ColumnautoDialIndex | read-only | current | Entry number, starting at 0. AC INI-Param: TargetOfChannel_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.2 | ColumnautoDialIsUsed | read-write | current | Is this index used. AC INI-Param: TargetOfChannel_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.3 | ColumnautoDialAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.4 | ColumnautoDialActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.5 | ColumnautoDialDestPhoneNumber | read-write | current | Access: Instant. AC INI-Param: TargetOfChannel_Destination |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.6 | ColumnautoDialType | read-write | current | Choose auto dial type. Access: Instant. AC INI-Param: TargetOfChannel_Type |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.7 | ColumnautoDialModule | read-only | current | Channels Module. AC INI-Param: TargetOfChannel_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.8 | ColumnautoDialPort | read-only | current | Channels Port. AC INI-Param: TargetOfChannel_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13 | NodecallerID | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.1 | ScalarcallerIDEnable | read-write | current | FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: ENABLECALLERID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21 | TablecallerDisplayTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1 | RowcallerDisplayEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.1 | ColumncallerDisplayIndex | read-only | current | Entry number, starting at 0. AC INI-Param: CallerDisplayInfo_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.2 | ColumncallerDisplayIsUsed | read-write | current | Is this index used. AC INI-Param: CallerDisplayInfo_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.3 | ColumncallerDisplayAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.4 | ColumncallerDisplayActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.5 | ColumncallerDisplayCallerDisplay | read-write | current | Caller Name. Access: Instant. AC INI-Param: CallerDisplayInfo_DisplayString |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.6 | ColumncallerDisplayRestriction | read-write | current | Restriction. Access: Instant. AC INI-Param: CallerDisplayInfo_IsCidRestricted |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.7 | ColumncallerDisplayModule | read-only | current | Channels Module. AC INI-Param: CallerDisplayInfo_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.8 | ColumncallerDisplayPort | read-only | current | Channels Port. AC INI-Param: CallerDisplayInfo_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22 | TablecallerIDperPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1 | RowcallerIDperPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.1 | ColumncallerIDperPortIndex | read-only | current | . AC INI-Param: EnableCallerId_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.2 | ColumncallerIDperPortIsUsed | read-write | current | Is this index used. Access: Offline. AC INI-Param: EnableCallerId_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.3 | ColumncallerIDperPortAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.4 | ColumncallerIDperPortActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.5 | ColumncallerIDperPortEnable | read-write | current | Enable. Access: Instant. AC INI-Param: EnableCallerId_IsEnabled |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.6 | ColumncallerIDperPortModule | read-only | current | Channels Module. AC INI-Param: EnableCallerId_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.7 | ColumncallerIDperPortPort | read-only | current | Channels Port. AC INI-Param: EnableCallerId_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14 | NodekeypadFeatures | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.1 | ScalarkeypadFeaturesCFUncond | read-write | current | Keying sequence for activating immediate Call Forward. Access: Instant. AC INI-Param: KEYCFUNCOND |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.2 | ScalarkeypadFeaturesCFDeact | read-write | current | Keying sequence for deactivating Call Forward. Access: Instant. AC INI-Param: KEYCFDEACT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.3 | ScalarkeypadFeaturesCFNoAnswer | read-write | current | Keying sequence for activating Call Forward on no answer. Access: Instant. AC INI-Param: KEYCFNOANSWER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.4 | ScalarkeypadFeaturesCFBusy | read-write | current | Keying sequence for activating Call Forward on busy. Access: Instant. AC INI-Param: KEYCFBUSY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.5 | ScalarkeypadFeaturesCLIR | read-write | current | Keying sequence for activating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIR |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.6 | ScalarkeypadFeaturesCLIRDeact | read-write | current | Keying sequence for deactivating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIRDEACT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.7 | ScalarkeypadFeaturesHotLine | read-write | current | Keying sequence for activating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.8 | ScalarkeypadFeaturesHotLineDeact | read-write | current | Keying sequence for deactivating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINEDEACT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.9 | ScalarkeypadFeaturesCFBusyOrNoAnswer | read-write | current | Keying sequence for activating Call Forward on busy or no answer. Access: Instant. AC INI-Param: KEYCFBUSYORNOANSWER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.10 | ScalarkeypadFeaturesCFDoNotDisturb | read-write | current | Keying sequence for activating Do Not Disturb. Access: Instant. AC INI-Param: KEYCFDONOTDISTURB |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.11 | ScalarkeypadFeaturesBlindTransfer | read-write | current | Keying sequence for performing blind transfer. Access: Instant. AC INI-Param: KEYBLINDTRANSFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.12 | ScalarkeypadFeaturesKeypadFeaturesCW | read-write | current | Keying sequence for activating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.13 | ScalarkeypadFeaturesKeypadFeaturesCWDeact | read-write | current | Keying sequence for deactivating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.14 | ScalarkeypadFeaturesRejectAnonymousCall | read-write | current | Key pad pattern for rejecting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCall |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.15 | ScalarkeypadFeaturesRejectAnonymousCallDeact | read-write | current | Key pad pattern for accepting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCallDeact |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15 | NodeportName | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21 | TablenamesTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1 | RownamesEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.1 | ColumnnamesIndex | read-only | current | Entry number, starting at 0. AC INI-Param: PortName_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.2 | ColumnnamesIsUsed | read-write | current | Is this index used. AC INI-Param: PortName_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.3 | ColumnnamesAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.4 | ColumnnamesActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.5 | ColumnnamesPortName | read-write | current | Access: Instant. AC INI-Param: PortName_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.6 | ColumnnamesModule | read-only | current | Module. AC INI-Param: PortName_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.7 | ColumnnamesPort | read-only | current | Port. AC INI-Param: PortName_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16 | NodedID | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.1 | ScalardIDEnable | read-write | current | Enable DID support. Access: Instant. AC INI-Param: ENABLEDID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.2 | ScalardIDEnableWink | read-write | current | Enable support for DID lines using Wink. Access: Instant. AC INI-Param: ENABLEDIDWINK |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.3 | ScalardIDDelayBeforeDidWink | read-write | current | delay between Off-Hook detection and Wink generation (relevant only for FXS). unit - ms. Access: Instant. AC INI-Param: DELAYBEFOREDIDWINK |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21 | TableenableDidPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1 | RowenableDidPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.1 | ColumnenableDidPortIndex | read-only | current | . AC INI-Param: EnableDid_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.2 | ColumnenableDidPortIsUsed | read-write | current | Is this index used. Access: Offline. AC INI-Param: EnableDid_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.3 | ColumnenableDidPortAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.4 | ColumnenableDidPortActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.5 | ColumnenableDidPortEnable | read-write | current | Enable. Access: Instant. AC INI-Param: EnableDid_IsEnable |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.6 | ColumnenableDidPortModule | read-only | current | Channels Module. AC INI-Param: EnableDid_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.7 | ColumnenableDidPortPort | read-only | current | Channels Port. AC INI-Param: EnableDid_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21 | TableenableCallWaitingPerPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1 | RowenableCallWaitingPerPortEntry | not-accessible | current | table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.1 | ColumnenableCallWaitingPerPortIndex | read-only | current | . AC INI-Param: CallWaitingPerPort_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.2 | ColumnenableCallWaitingPerPortIsUsed | read-write | current | Is this index used. Access: Instant. AC INI-Param: CallWaitingPerPort_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.3 | ColumnenableCallWaitingPerPortModule | read-only | current | module. AC INI-Param: CallWaitingPerPort_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.4 | ColumnenableCallWaitingPerPortPort | read-only | current | port. AC INI-Param: CallWaitingPerPort_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.5 | ColumnenableCallWaitingPerPortAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.6 | ColumnenableCallWaitingPerPortActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.7 | ColumnenableCallWaitingPerPortEnable | read-write | current | Enable. Access: Instant. AC INI-Param: CallWaitingPerPort_IsEnabled |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5 | NodemediaGW | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.1 | ScalarmediaGWMediaChannels | read-write | current | Number of channels associated with media services (announcements, conferencing). Access: Offline. AC INI-Param: MEDIACHANNELS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10 | Nodeconference | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.1 | ScalarconferenceID | read-write | current | Identification of conference call (To be used by SIP INVITE). Access: Instant. AC INI-Param: CONFERENCEID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.2 | ScalarconferenceBipOnConference | read-write | current | Beep when a new participant joins a conference. Access: Instant. AC INI-Param: BIPONCONFERENCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.3 | ScalarconferenceEnableDTMFReporting | read-write | current | EnableConferenceDTMFReporting- if enable report in out of band format about detected DTMF digits (values 1-Report,0 - Not Report). Access: Instant. AC INI-Para… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.4 | ScalarconferenceEnableDTMFClamping | read-write | current | EnableConferenceDTMFClamp - if enable remove detected DTMF digits from the audio stream on simple conference participant. Access: Instant. AC INI-Param: Enable… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.5 | Scalarconference3WayMode | read-write | current | If 3wayConferenceMode=0, the usual conference mode will be used, this mode wil be compatible with our IPmedia server. The INVITE messages that are used to form… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.6 | ScalarconferenceMaxInBoardCalls | read-write | current | Max InBoard Conference Calls. Access: Offline. AC INI-Param: MaxInBoardConferenceCalls |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21 | TableacTWCnonAllocateablePortsTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1 | RowacTWCnonAllocateablePortsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.1 | ColumnacTWCnonAllocateablePortsIndex | not-accessible | current | Line index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.2 | ColumnacTWCnonAllocateablePortsNumber | read-write | current | Define the Ports that are not hit by 3w conference feature. Access: Instant. AC INI-Param: 3WayConfNoneAllocateablePorts |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11 | Nodeannouncement | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.1 | ScalarannouncementID | read-write | current | Identification of a play voice prompt call (To be used by SIP INVITE). Access: Instant. AC INI-Param: ANNOUNCEMENTID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.2 | ScalarannouncementNumOfEndPoints | read-write | current | Number of Annuncment endpoints. Access: Offline. AC INI-Param: NUMOFANNOUNCENDPOINTS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.3 | ScalarannouncementToneID | read-write | current | Identification of a play call progress tone call (To be used by SIP INVITE). Access: Instant. AC INI-Param: TONEID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10 | Nodestreaming | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.1 | ScalarstreamingID | read-write | current | Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: STREAMINGID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.2 | ScalarstreamingNumOfEndPoints | read-write | current | Number of Streaming endpoints. Access: Offline. AC INI-Param: NUMOFSTREAMINGENDPOINTS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.3 | ScalarstreamingRecordScriptPath | read-write | obsolete | Identification of HTTP Record Script (To be used by FOR RECORD). Access: Offline. AC INI-Param: RecordScriptPath |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.4 | ScalarstreamingMediaID | read-write | current | Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: MediaStreamingID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.5 | ScalarstreamingStopRecordingOnNoSpeachTimeout | read-write | current | Timeout for no speech detection used to stop recording. Access: Instant. AC INI-Param: STOPRECORDINGONNOSPEACHTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.6 | ScalarstreamingPlayFromID | read-write | current | Identification of voice stream play location (To be used by SIP INVITE). Access: Instant. AC INI-Param: PLAYFROMID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.7 | ScalarstreamingRecordToID | read-write | current | Identification of voice stream recording location (To be used by SIP INVITE). Access: Instant. AC INI-Param: RECORDTOID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.8 | ScalarstreamingNetAnnAnncID | read-write | current | NetAnn Announcement ID. Access: Instant. AC INI-Param: NETANNANNCID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.9 | ScalarstreamingMscmlID | read-write | current | Identification of HTTP played voice prompt using mscml(To be used by SIP INVITE). Access: Instant. AC INI-Param: MSCMLID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.10 | ScalarstreamingMonitorID | read-write | current | Identification of Calea call (To be used by SIP INVITE). Access: Instant. AC INI-Param: MONITORID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.12 | Nodevxml | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.1 | ScalarvxmlID | read-write | current | Identification of VoiceXML call (To be used by SIP INVITE). Access: Instant. AC INI-Param: VXMLID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.2 | ScalarvxmlNumOfEndPoints | read-write | current | Number of VXML endpoints. Access: Offline. AC INI-Param: NUMOFVXMLENDPOINTS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.13 | Nodecalea | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.13.1 | ScalarcaleaInterceptionDirection | read-write | current | Defines the direction of interception of a BCT listener. Access: Offline. AC INI-Param: INTERCEPTIONDIRECTION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.14 | Nodetranscoding | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.5.14.1 | ScalartranscodingID | read-write | current | SIP Transcoding ID. Access: Instant. AC INI-Param: TRANSCODINGID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6 | Nodecoders | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1 | TablecodersTable | not-accessible | current | The names of the five possible coders. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1 | RowcodersEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.1 | ColumncodersIndex | not-accessible | deprecated | Entry number, starting at 0. AC INI-Param: CoderName_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.2 | ColumncodersRowStatus | read-create | deprecated | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.3 | ColumncodersAction | read-only | deprecated | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.4 | ColumncodersActionResult | read-only | deprecated | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.5 | ColumncodersName | read-create | deprecated | Coder Name. Access: Offline. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.6 | ColumncodersInterval | read-create | deprecated | Coder Interval. Access: Offline. AC INI-Param: CoderName_PacketInterval |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.7 | ColumncodersRate | read-create | deprecated | Rate in bit per second. Access: Offline. AC INI-Param: CoderName_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.8 | ColumncodersPayloadType | read-create | deprecated | Payload type. Access: Offline. AC INI-Param: CoderName_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.9 | ColumncodersSilenceSuppression | read-create | deprecated | Silence Suppression. Access: Offline. AC INI-Param: CoderName_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2 | TablecodersGroup0Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1 | RowcodersGroup0Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.1 | ColumncodersGroup0Index | not-accessible | current | Index Field for line. AC INI-Param: CodersGroup0_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.2 | ColumncodersGroup0RowStatus | read-create | current | ROWSTATUS field for line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.3 | ColumncodersGroup0Action | read-create | current | Mangement Field for ACTIONS. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.4 | ColumncodersGroup0ActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.5 | ColumncodersGroup0Name | read-create | current | Coders Group name. Access: Instant. AC INI-Param: CodersGroup0_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.6 | ColumncodersGroup0PacketizationTime | read-create | current | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup0_pTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.7 | ColumncodersGroup0Rate | read-create | current | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup0_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.8 | ColumncodersGroup0PayloadType | read-create | current | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup0_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.9 | ColumncodersGroup0SilenceSuppression | read-create | current | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup0_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3 | TablecodersGroup1Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1 | RowcodersGroup1Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.1 | ColumncodersGroup1Index | not-accessible | current | Index Field for line. AC INI-Param: CodersGroup1_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.2 | ColumncodersGroup1RowStatus | read-create | current | ROWSTATUS field for line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.3 | ColumncodersGroup1Action | read-create | current | Mangement Field for ACTIONS. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.4 | ColumncodersGroup1ActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.5 | ColumncodersGroup1Name | read-create | current | Coders Group name. Access: Instant. AC INI-Param: CodersGroup1_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.6 | ColumncodersGroup1PacketizationTime | read-create | current | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup1_pTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.7 | ColumncodersGroup1Rate | read-create | current | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup1_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.8 | ColumncodersGroup1PayloadType | read-create | current | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup1_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.9 | ColumncodersGroup1SilenceSuppression | read-create | current | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup1_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4 | TablecodersGroup2Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1 | RowcodersGroup2Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.1 | ColumncodersGroup2Index | not-accessible | current | Index Field for line. AC INI-Param: CodersGroup2_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.2 | ColumncodersGroup2RowStatus | read-create | current | ROWSTATUS field for line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.3 | ColumncodersGroup2Action | read-create | current | Mangement Field for ACTIONS. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.4 | ColumncodersGroup2ActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.5 | ColumncodersGroup2Name | read-create | current | Coders Group name. Access: Instant. AC INI-Param: CodersGroup2_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.6 | ColumncodersGroup2PacketizationTime | read-create | current | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup2_pTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.7 | ColumncodersGroup2Rate | read-create | current | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup2_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.8 | ColumncodersGroup2PayloadType | read-create | current | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup2_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.9 | ColumncodersGroup2SilenceSuppression | read-create | current | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup2_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5 | TablecodersGroup3Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1 | RowcodersGroup3Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.1 | ColumncodersGroup3Index | not-accessible | current | Index Field for line. AC INI-Param: CodersGroup3_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.2 | ColumncodersGroup3RowStatus | read-create | current | ROWSTATUS field for line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.3 | ColumncodersGroup3Action | read-create | current | Mangement Field for ACTIONS. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.4 | ColumncodersGroup3ActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.5 | ColumncodersGroup3Name | read-create | current | Coders Group name. Access: Instant. AC INI-Param: CodersGroup3_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.6 | ColumncodersGroup3PacketizationTime | read-create | current | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup3_pTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.7 | ColumncodersGroup3Rate | read-create | current | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup3_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.8 | ColumncodersGroup3PayloadType | read-create | current | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup3_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.9 | ColumncodersGroup3SilenceSuppression | read-create | current | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup3_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6 | TablecodersGroup4Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1 | RowcodersGroup4Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.1 | ColumncodersGroup4Index | not-accessible | current | Index Field for line. AC INI-Param: CodersGroup4_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.2 | ColumncodersGroup4RowStatus | read-create | current | ROWSTATUS field for line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.3 | ColumncodersGroup4Action | read-create | current | Mangement Field for ACTIONS. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.4 | ColumncodersGroup4ActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.5 | ColumncodersGroup4Name | read-create | current | Coders Group name. Access: Instant. AC INI-Param: CodersGroup4_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.6 | ColumncodersGroup4PacketizationTime | read-create | current | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup4_pTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.7 | ColumncodersGroup4Rate | read-create | current | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup4_rate |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.8 | ColumncodersGroup4PayloadType | read-create | current | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup4_PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.9 | ColumncodersGroup4SilenceSuppression | read-create | current | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup4_Sce |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7 | NodesupServices | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.1 | ScalarsupServicesEnableHold | read-write | current | Enable Call Hold service. Access: Instant. AC INI-Param: ENABLEHOLD |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.2 | ScalarsupServicesNameID | read-write | current | Enable Name Identification service. Access: Instant. AC INI-Param: ENABLENAMEIDENTIFICATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.3 | ScalarsupServicesHoldFormat | read-write | current | Call Hold format - Zero IP or 'sendonly' SDP attribute. Access: Instant. AC INI-Param: HOLDFORMAT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.4 | ScalarsupServicesSendMeteringMessageToIP | read-write | current | Send metering messages to IP on detection of analog metering pulses. Access: Instant. AC INI-Param: SENDMETERING2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.5 | ScalarsupServicesHeldTimeout | read-write | current | Maximum time allowed for call to be retreived from IP (seconds). Access: Instant. AC INI-Param: HELDTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.6 | ScalarsupServicesHookFlashCode | read-write | current | If this code received during session, act as if hook flash received from the TEL side. This parameter can use DIGIT MAP syntax. Access: Instant. AC INI-Param: … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.7 | ScalarsupServicesCHRRTimeout | read-write | current | Call hold reminder ring maximum ringing time (in seconds). Access: Instant. AC INI-Param: CHRRTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.8 | ScalarsupServicesEnableHold2ISDN | read-write | current | Enable Hold/retrieve from and to ISDN. Access: Instant. AC INI-Param: ENABLEHOLD2ISDN |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.9 | ScalarsupServicesEnableMOH | read-write | current | FXS: enable playing Music On Hold (instead of Held tone to the PSTN side). Access: Instant. AC INI-Param: EnableMOH |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.10 | Nodetransfer | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.1 | ScalartransferEnable | read-write | current | Enable Call Transfer service. Access: Instant. AC INI-Param: ENABLETRANSFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.2 | ScalartransferXferPrefix | read-write | current | Prefix added to the called number of a transferred call. Access: Instant. AC INI-Param: XFERPREFIX |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11 | NodecallWaiting | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.1 | ScalarcallWaitingEnable | read-write | current | Enable Call Waiting service. Access: Instant. AC INI-Param: ENABLECALLWAITING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.2 | ScalarcallWaitingNumberOfIndications | read-write | current | Number of Call Waiting indications to be played to the user. Access: Instant. AC INI-Param: NUMBEROFWAITINGINDICATIONS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.3 | ScalarcallWaitingTimeBetweenIndications | read-write | current | Time between one call waiting indication to the next (seconds). Access: Instant. AC INI-Param: TIMEBETWEENWAITINGINDICATIONS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.4 | ScalarcallWaitingWaitingBeepDuration | read-write | current | Call Waiting tone beep length (msec). Access: Instant. AC INI-Param: WAITINGBEEPDURATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.5 | ScalarcallWaitingTimeBeforeWaitingIndications | read-write | current | Time before call waiting indication is sent to a busy line (seconds). Access: Instant. AC INI-Param: TIMEBEFOREWAITINGINDICATIONS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12 | NodeforwardSettings | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.1 | ScalarforwardSettingsEnable | read-write | current | Enable Call Forward service. Access: Instant. AC INI-Param: ENABLEFORWARD |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21 | TableforwardTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1 | RowforwardEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.1 | ColumnforwardIndex | read-only | current | Entry number, starting at 0. AC INI-Param: FwdInfo_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.2 | ColumnforwardIsUsed | read-write | current | Is this index used. AC INI-Param: FwdInfo_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.3 | ColumnforwardAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.4 | ColumnforwardActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.5 | ColumnforwardForwardType | read-write | current | Access: Instant. AC INI-Param: FwdInfo_Type |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.6 | ColumnforwardForwardedToNumber | read-write | current | Access: Instant. AC INI-Param: FwdInfo_Destination |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.7 | ColumnforwardTimeForNoReply | read-write | current | Access: Instant. AC INI-Param: FwdInfo_NoReplyTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.8 | ColumnforwardModule | read-only | current | Module. AC INI-Param: FwdInfo_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.9 | ColumnforwardPort | read-only | current | Port. AC INI-Param: FwdInfo_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13 | NodemWI | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.1 | ScalarmWIEnable | read-write | current | Enable MWI support (Message Waiting Indicator). Access: Instant. AC INI-Param: ENABLEMWI |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.2 | ScalarmWIAnalogLamp | read-write | current | Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: MWIANALOGLAMP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.3 | ScalarmWIDisplay | read-write | current | Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: MWIDISPLAY |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.4 | ScalarmWIServerIP | read-write | current | MWI server IP address. Access: Instant. AC INI-Param: MWISERVERIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.5 | ScalarmWIExpirationTime | read-write | current | MWI service subscription expiration time (seconds). Access: Instant. AC INI-Param: MWIEXPIRATIONTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.6 | ScalarmWIServerTransportType | read-write | current | MWI server transport type. Access: Instant. AC INI-Param: MWISERVERTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.14 | NodesupServicesConference | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.1 | ScalarsupServicesConferenceEnable3Way | read-write | current | Enable 3 way conference feature. Access: Offline. AC INI-Param: ENABLE3WAYCONFERENCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.2 | ScalarsupServicesConferenceEstablishCode | read-write | current | Control Key activation of the 3 way conference. Access: Instant. AC INI-Param: CONFERENCECODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.7.30 | ScalarsupServicesBlindTransferDisconnectTimeout | read-write | current | Maximum time (milliseconds) to wait for disconnect from tel before performing blind transfer. Access: Instant. AC INI-Param: BLINDTRANSFERDISCONNECTTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8 | Nodetones | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.1 | ScalartonesTimeForReorderTone | read-write | current | Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TIMEFORREORDERTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.2 | ScalartonesTimeForDialTone | read-write | current | Duration of played dial tone after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: TIMEFORDIALTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.3 | ScalartonesPlayRBTone2Ip | read-write | current | Enable ringback tone playing towards IP. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.4 | ScalartonesPlayRBTone2Tel | read-write | current | Enable ringback tone playing towards Tel side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TEL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.5 | ScalartonesStutterToneDuration | read-write | current | Time for playing confirmation tone before normal dial tone is played (msec). Access: Instant. AC INI-Param: STUTTERTONEDURATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.6 | ScalartonesPlayRBToneXferSuccess | read-write | current | Play RB tone on transfer success. Access: Instant. AC INI-Param: PLAYRBTONEONXFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.7 | ScalartonesFirstCallRBTId | read-write | current | the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLRBTID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.8 | ScalartonesPrecedenceRingingType | read-write | current | the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: PRECEDENCERINGINGTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.9 | ScalartonesFirstCallWaitingToneID | read-write | current | The index of the first Call Waiting tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLWAITINGTONEID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.8.10 | ScalartonesEnableComfortTone | read-write | current | Enable Comfort Tone for playing a patience comfort tone between Invite and 18x response. [0] - Disabled [1] - Enabled. Comfort Tone will be played. Access: Ins… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.9 | Nodelogger | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.9.1 | ScalarloggerGwAppCdrReportLevel | read-write | current | CDR reports timing. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.9.2 | ScalarloggerGwDebugLevel | read-write | current | Configure different debug level. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.9.3 | ScalarloggerCDRSyslogServerIP | read-write | current | Syslog server IP address for sending CDRs. Access: Instant. AC INI-Param: CDRSYSLOGSERVERIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.10 | NodeprogressIndicators | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.10.1 | ScalarprogressIndicators2ISDN | read-write | obsolete | Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN |
| 1.3.6.1.4.1.5003.9.10.3.1.1.10.2 | ScalarprogressIndicators2IP | read-write | current | Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: PROGRESSINDICATOR2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.10.20 | NodescreeningIndicators | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.1 | ScalarscreeningIndicators2Ip | read-write | current | Override screening indicator value in Setup messages to IP. Access: Instant. AC INI-Param: SCREENINGIND2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.2 | ScalarscreeningIndicators2ISDN | read-write | current | Override screening indicator value in Setup messages to ISDN. Access: Instant. AC INI-Param: SCREENINGIND2ISDN |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11 | Nodemisc | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.1 | ScalarmiscDisconnectOnBusyTone | read-write | current | Release call if gateway receives busy or fast busy tone before the call is answered. Access: Instant. AC INI-Param: DISCONNECTONBUSYTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.2 | ScalarmiscDisconnectOnSilence | read-write | current | Disconnect calls on a configured silence timeout. Access: Offline. AC INI-Param: ENABLESILENCEDISCONNECT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.3 | ScalarmiscEnableBusyOut | read-write | current | Take trunks out of service in case of LAN down. Access: Instant. AC INI-Param: ENABLEBUSYOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.4 | ScalarmiscSecureCallsFromIp | read-write | current | Gateway will only accept calls from IP addresses that are defined in the Tel to IP Routing table. Access: Instant. AC INI-Param: SECURECALLSFROMIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.5 | ScalarmiscStaticNATIP | read-write | current | static NAT IP, to be supported by the gateway. Access: Instant. AC INI-Param: STATICNATIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.6 | ScalarmiscSilenceDisconnectTimeout | read-write | current | Defines the Silence period to be detected. Access: Offline. AC INI-Param: FarEndDisconnectSilencePeriod |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.7 | ScalarmiscIsFaxUsed | read-write | current | Enable T.38 Fax signaling. Access: Instant. AC INI-Param: IsFaxUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.8 | ScalarmiscDelayTime | read-write | current | Gateway delay time after reset (seconds). Access: Instant. AC INI-Param: GWAPPDelayTime |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.9 | ScalarmiscDetFaxOnAnswerTone | read-write | current | Start T.38 fax procedure after fax answer tone detection or after HDLC preamble signal detection. Access: Instant. AC INI-Param: DETFAXONANSWERTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.10 | ScalarmiscDefaultReleaseCause | read-write | current | The release cause that will be sent to IP or to Tel when gateway initiates release by itself. Access: Instant. AC INI-Param: DEFAULTRELEASECAUSE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.11 | ScalarmiscT38UseRTPPort | read-write | current | T.38 packets will be received on RTP port. Access: Instant. AC INI-Param: T38USERTPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.12 | ScalarmiscRFC2833PayloadType | read-write | current | control the RFC 2833 Relay RTP Payload type. Access: Instant. AC INI-Param: RFC2833PayloadType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.13 | ScalarmiscIsCiscoSceMode | read-write | current | In use with G.729 - if enabled and SCE=2 then AnnexB=no. Access: Instant. AC INI-Param: ISCISCOSCEMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.14 | ScalarmiscDisconnectOnDialTone | read-write | current | Release call if gateway receives dial tone before the call is answered or during voice session. Access: Instant. AC INI-Param: DISCONNECTONDIALTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.15 | ScalarmiscEnableSemiAttendedTransfer | read-write | obsolete | Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.16 | ScalarmiscHookFlashCodeIP | read-write | current | The string represent HookFlash, when reported to or from IP. Currently used in H.323 only (H245UserOutput, H245Signal or Q931UserInfo). Access: Instant. AC INI… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.17 | ScalarmiscEnableFaxRerouting | read-write | current | Enable rerouting of FAX calls to FAX destination. Access: Instant. AC INI-Param: ENABLEFAXREROUTING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.18 | ScalarmiscT38MaxDatagramSize | read-write | current | T.38 coder - Max Datagram Size. Access: Instant. AC INI-Param: T38MAXDATAGRAMSIZE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.19 | ScalarmiscIsdnDisconnectOnBusyTone | read-write | current | 1 - Release call if gateway receives busy or fast busy tone. 0 - don't release. Access: Instant. AC INI-Param: ISDNDISCONNECTONBUSYTONE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.20 | ScalarmiscFaxCNGMode | read-write | current | Enables sending of ReInvite on detection of FAX CNG tone when CNGDetectorMode=1. Access: Instant. AC INI-Param: FAXCNGMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.21 | ScalarmiscGracefulBusyOutTimeout | read-write | current | Graceful Busy Out Timeout in seconds. Sets the time before a busy out signal will be sent to a trunk even if there are still active calls on the trunk. Access:… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.22 | ScalarmiscT38FaxMaxBufferSize | read-write | current | Defines the fax max buffer size in T38 SDP negotiation. Access: Instant. AC INI-Param: T38FAXMAXBUFFERSIZE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.23 | ScalarmiscReliableConnectionPersistentMode | read-write | current | if set to 1 - All TCP/TLS connections will be set as persistent and will not be released. Access: Instant. AC INI-Param: RELIABLECONNECTIONPERSISTENTMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.24 | ScalarmiscWANIPAddress | read-write | current | Sets the WAN address to be used by VOIP signalling applications. Range = IPv4 address in dotted decimal notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Ins… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.25 | ScalarmiscEnableDelayedOffer | read-write | current | Send INVITE message with/without sdp offer. [0] - (default) means SDP will be offered in the INVITE message. [1] - means SDP will be offered by the other side … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.26 | ScalarmiscEnableNRTSubscription | read-write | current | Enable subscription for Call forward ringtone Indicator service. Access: Instant. AC INI-Param: ENABLENRTSUBSCRIPTION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.27 | ScalarmiscASSubscribeIPGroupID | read-write | current | IPGroup ID for AS server subscribe purposes. Access: Instant. AC INI-Param: ASSUBSCRIBEIPGROUPID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.28 | ScalarmiscNRTSubscriptionRetryTime | read-write | current | NRT service subscription retry time after last subscription failure (in seconds). Access: Instant. AC INI-Param: NRTSUBSCRIBERETRYTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.29 | ScalarmiscCallForwardRingToneID | read-write | current | Ringtone type for Call forward notification. Access: Instant. AC INI-Param: CALLFORWARDRINGTONEID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.30 | ScalarmiscKeyCallPickup | read-write | current | Keying sequence for performing call pickup. Access: Instant. AC INI-Param: KEYCALLPICKUP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.31 | ScalarmiscEnableRFC4117Transcoding | read-write | current | Enable transcoding call RFC4117. Access: Offline. AC INI-Param: ENABLERFC4117TRANSCODING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.32 | ScalarmiscEnableSingleDSPTranscoding | read-write | current | Enable/Disable using single DSP for g711 < Access: Instant. AC INI-Param: ENABLESINGLEDSPTRANSCODING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.33 | ScalarmiscEnableNetworkISDNTransfer | read-write | current | if set to 0 reject ISDN transfer request. Access: Instant. AC INI-Param: ENABLENETWORKISDNTRANSFER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.34 | ScalarmiscLDAPocsNumberAttributeName | read-write | current | The name of the attribute which represents the user OCS number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPOCSNUMATTRIBUTENAME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.35 | ScalarmiscLDAPpbxNumberAttributeName | read-write | current | The name of the attribute which represents the user PBX number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPPBXNUMATTRIBUTENAME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.11.36 | ScalarmiscLDAPMobileNumberAttributeName | read-write | current | The name of the attribute which represents the user Mobile number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPMOBILENUMATTRIBUTENAME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12 | NoderesourceManagement | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.1 | ScalarresourceManagementMaxActiveCalls | read-write | current | Limit the number of calls that the gateway can handle at the same time. Access: Instant. AC INI-Param: MAXACTIVECALLS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.2 | ScalarresourceManagementIsSelfCheckAuditUsed | read-write | current | defines whether the resources self check audit is used. Access: Instant. AC INI-Param: ISSELFCHECKAUDITUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.3 | ScalarresourceManagementRejectCallsOnOverload | read-write | obsolete | Defines whether new calls will be rejected during overload period. Access: Instant. AC INI-Param: REJECTCALLSONOVERLOAD |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.4 | ScalarresourceManagementDisconnectOnBrokenConnection | read-write | current | Disconnect calls on receiving RTP broken notification. Access: Instant. AC INI-Param: DISCONNECTONBROKENCONNECTION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.5 | ScalarresourceManagementMaxCallDuration | read-write | current | Limit the call time duration (minutes) 0 = no limit. Access: Instant. AC INI-Param: MAXCALLDURATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.12.6 | ScalarresourceManagementOverloadSensitivityLevel | read-write | current | Defines when to enter overload state: 0:never 1:on very high utilization 2:on medium utilization. Access: Instant. AC INI-Param: OverloadSensitivityLevel |
| 1.3.6.1.4.1.5003.9.10.3.1.1.13 | NodeaMD | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.13.1 | ScalaraMDTimeOut | read-write | current | Amd Detection Timeout <mSec>. Access: Instant. AC INI-Param: AMDTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.14 | Nodeaaa | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.14.1 | ScalaraaaIndications | read-write | current | Which Authentication, Authorization and Accounting indications to use. Access: Instant. AC INI-Param: AAAINDICATIONS |
| 1.3.6.1.4.1.5003.9.10.3.1.1.14.2 | ScalaraaaRadiusAccountingType | read-write | current | When will Radius Acounting messages be sent. Access: Instant. AC INI-Param: RADIUSACCOUNTINGTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15 | Nodeprofile | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21 | TableiPProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1 | RowiPProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.1 | ColumniPProfileIndex | not-accessible | current | Entry number, starting at 1. AC INI-Param: IpProfile_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.2 | ColumniPProfileRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.3 | ColumniPProfileAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.4 | ColumniPProfileActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.5 | ColumniPProfilePreference | read-create | current | Preference. Access: Instant. AC INI-Param: IpProfile_IpPreference |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.6 | ColumniPProfileProfileName | read-create | current | Profile Name. Access: Instant. AC INI-Param: IpProfile_ProfileName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.7 | ColumniPProfileCodersGroupID | read-create | current | Coders Group ID. Access: Instant. AC INI-Param: IpProfile_CodersGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.8 | ColumniPProfileFaxTransportMode | read-write | obsolete | Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.9 | ColumniPProfileIsFaxUsed | read-create | current | Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1. Access: Instant. AC INI-Par… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.10 | ColumniPProfileDJBufMinDelay | read-create | current | Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: IpProfile_JitterBufMinDelay |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.11 | ColumniPProfileDJBufOptFactor | read-create | current | Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: IpProfile_JitterBufOptFactor |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.12 | ColumniPProfileIPDiffServ | read-create | current | IP DiffServ byte value. Access: Instant. AC INI-Param: IpProfile_IPDiffServ |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.13 | ColumniPProfileSigIPDiffServ | read-create | current | Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: IpProfile_SigIPDiffServ |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.14 | ColumniPProfileSCE | read-create | current | Silence Suppression mode. Access: Instant. AC INI-Param: IpProfile_SCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.15 | ColumniPProfileRTPRedundancyDepth | read-create | current | Enables or disables generation of RFC 2198 redundancy packets. Access: Instant. AC INI-Param: IpProfile_RTPRedundancyDepth |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.16 | ColumniPProfileRemoteBaseUDPPort | read-create | current | Remote Base UDP Port For Aggregation. Access: Instant. AC INI-Param: IpProfile_RemoteBaseUDPPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.17 | ColumniPProfileCngDetectorMode | read-create | current | Access: Instant. AC INI-Param: IpProfile_CNGmode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.18 | ColumniPProfileVxxModemTransportType | read-create | current | Access: Instant. AC INI-Param: IpProfile_VxxTransportType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.19 | ColumniPProfileNSEMode | read-create | current | Access: Instant. AC INI-Param: IpProfile_NSEMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.20 | ColumniPProfilePlayRingbackToneToIP | read-create | current | Access: Instant. AC INI-Param: IpProfile_PlayRBTone2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.21 | ColumniPProfileEnableEarlyMedia | read-create | current | Access: Instant. AC INI-Param: IpProfile_EnableEarlyMedia |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.22 | ColumniPProfileProgressIndicatorToIP | read-create | current | Access: Instant. AC INI-Param: IpProfile_ProgressIndicator2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.23 | ColumniPProfileECE | read-create | current | Enables or disables the echo canceler. Access: Instant. AC INI-Param: IpProfile_EnableEchoCanceller |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.24 | ColumniPProfileMediaSecurityBehavior | read-create | current | Access: Instant. AC INI-Param: IpProfile_MediaSecurityBehaviour |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.25 | ColumniPProfileCallLimit | read-create | current | Access: Instant. AC INI-Param: IpProfile_CallLimit |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.26 | ColumniPProfileDisconnectOnBrokenConnection | read-create | current | Access: Instant. AC INI-Param: IpProfile_DisconnectOnBrokenConnection |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.27 | ColumniPProfileCopyDest2RedirectNumber | read-create | current | Access: Instant. AC INI-Param: IpProfile_CopyDest2RedirectNumber |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.28 | ColumniPProfileAddIEInSetup | read-create | current | Access: Instant. AC INI-Param: IpProfile_AddIEInSetup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.29 | ColumniPProfileRxDTMFOption | read-create | current | Access: Instant. AC INI-Param: IpProfile_RxDTMFOption |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.30 | ColumniPProfileFirstTxDtmfOption | read-create | current | Access: Instant. AC INI-Param: IpProfile_FirstTxDtmfOption |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.31 | ColumniPProfileSecondTxDtmfOption | read-create | current | Access: Instant. AC INI-Param: IpProfile_SecondTxDtmfOption |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.32 | ColumniPProfileMediaIPVersionPreference | read-create | current | Access: Instant. AC INI-Param: IpProfile_MediaIPVersionPreference |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.33 | ColumniPProfileSBCAllowedCodersGroupID | read-create | current | Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.34 | ColumniPProfileSBCAllowedCodersMode | read-create | current | Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.35 | ColumniPProfileSBCMediaSecurityBehaviour | read-create | current | Access: Instant. AC INI-Param: IpProfile_SBCMediaSecurityBehaviour |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22 | TabletelProfileTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1 | RowtelProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.1 | ColumntelProfileIndex | not-accessible | current | Entry number, starting at 1. AC INI-Param: TelProfile_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.2 | ColumntelProfileRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.3 | ColumntelProfileAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.4 | ColumntelProfileActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.5 | ColumntelProfilePreference | read-create | current | Preference. Access: Instant. AC INI-Param: TelProfile_TelPreference |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.6 | ColumntelProfileProfileName | read-create | current | Profile Name. Access: Instant. AC INI-Param: TelProfile_ProfileName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.7 | ColumntelProfileCodersGroupID | read-create | current | Coders Group ID. Access: Instant. AC INI-Param: TelProfile_CodersGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.8 | ColumntelProfileFaxTransportMode | read-write | obsolete | Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.9 | ColumntelProfileIsFaxUsed | read-create | current | Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1.0 - No fax , 1- T.38 , 2- Fa… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.10 | ColumntelProfileDJBufMinDelay | read-create | current | Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: TelProfile_JitterBufMinDelay |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.11 | ColumntelProfileDJBufOptFactor | read-create | current | Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: TelProfile_JitterBufOptFactor |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.12 | ColumntelProfileIPDiffServ | read-create | current | IP DiffServ byte value. Access: Instant. AC INI-Param: TelProfile_IPDiffServ |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.13 | ColumntelProfileSigIPDiffServ | read-create | current | Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: TelProfile_SigIPDiffServ |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.14 | ColumntelProfileVoiceVolume | read-create | current | Voice Volume. Access: Instant. AC INI-Param: TelProfile_VoiceVolume |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.15 | ColumntelProfileDTMFVolume | read-create | current | DTMF Volume. Access: Instant. AC INI-Param: TelProfile_DtmfVolume |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.16 | ColumntelProfileInputGain | read-create | current | Input Gain. Access: Instant. AC INI-Param: TelProfile_InputGain |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.17 | ColumntelProfileEnableReversalPolarity | read-create | current | FXO: Connect/Disconnect calls upon detection of polarity reversal signal. FXS: generate the signal. Access: Instant. AC INI-Param: TelProfile_EnableReversePola… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.18 | ColumntelProfileEnableCurrentDisconnect | read-create | current | Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: TelProfile_EnableCurrentDisconnect |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.19 | ColumntelProfileEnableDigitDelivery | read-create | current | Enables Digit delivery to TEL side. Access: Instant. AC INI-Param: TelProfile_EnableDigitDelivery |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.20 | ColumntelProfileECE | read-create | current | Enables or disables the echo canceler. Access: Instant. AC INI-Param: TelProfile_EnableEC |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.21 | ColumntelProfileMWIanalogLamp | read-create | current | Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: TelProfile_MWIAnalog |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.22 | ColumntelProfileMWIDisplay | read-create | current | Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: TelProfile_MWIDisplay |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.23 | ColumntelProfileMaxFlashHookDetectionPeriod | read-create | current | Access: Instant. AC INI-Param: TelProfile_FlashHookPeriod |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.24 | ColumntelProfileEnableEarlyMedia | read-create | current | Enable Early Media. Access: Instant. AC INI-Param: TelProfile_EnableEarlyMedia |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.25 | ColumntelProfileProgressIndicatorToIP | read-create | current | Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: TelProfile_ProgressIndicator2IP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.26 | ColumntelProfileTimeForReorderTone | read-create | current | Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TelProfile_TimeForReorderTone |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.27 | ColumntelProfileEnableDIDWink | read-create | current | Access: Instant. AC INI-Param: TelProfile_EnableDIDWink |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.28 | ColumntelProfileIsTwoStageDial | read-create | current | Access: Instant. AC INI-Param: TelProfile_IsTwoStageDial |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.29 | ColumntelProfileDisconnectOnBusyTone | read-create | current | Access: Instant. AC INI-Param: TelProfile_DisconnectOnBusyTone |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.30 | ColumntelProfileEnableVoiceMailDelay | read-create | current | Access: Instant. AC INI-Param: TelProfile_EnableVoiceMailDelay |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.31 | ColumntelProfileDialPlanIndex | read-create | current | Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: TelProfile_DialPlanIndex |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.32 | ColumntelProfileEnable911PSAP | read-create | current | GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_Enable911PSAP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.33 | ColumntelProfileSwapTelToIpPhoneNumbers | read-create | current | GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_SwapTelToIpPhoneNumbers |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.34 | ColumntelProfileEnableAGC | read-create | current | Access: Instant. AC INI-Param: TelProfile_EnableAGC |
| 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.35 | ColumntelProfileECNlpMode | read-create | current | Access: Instant. AC INI-Param: TelProfile_ECNlpMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16 | NodevoiceMail | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.1 | ScalarvoiceMailLineTransferMode | read-write | current | LineTransferMode: 0-ip 1-pbx blind transfer 2-pbx semi supv transfer 3-supervised transfer (also known as warm transfer). (in TP, feature key and parameter Ena… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.2 | ScalarvoiceMailInterface | read-write | current | Selects the method of communication between PBX and the Gateway, that is used instead of legacy voicemail. Access: Instant. AC INI-Param: VoiceMailInterface |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20 | NodevmDigitPattern | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.1 | ScalarvmDigitPatternNoReason | read-write | current | Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReason |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.2 | ScalarvmDigitPatternOnBusy | read-write | current | Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusy |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.3 | ScalarvmDigitPatternOnNoAnswer | read-write | current | Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswer |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.4 | ScalarvmDigitPatternOnDND | read-write | current | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDND |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.5 | ScalarvmDigitPatternInternalCall | read-write | current | Digit pattern used to indicate internal call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternInternalCall |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.6 | ScalarvmDigitPatternExternalCall | read-write | current | Digit pattern used to indicate external call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternExternalCall |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.7 | ScalarvmDigitPatternDisconnectCode | read-write | current | Disconnect call if digit string is received from the TEL side during session. Access: Instant. AC INI-Param: TelDisconnectCode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.8 | ScalarvmDigitPatternConnectCode | read-write | current | Play Code string to Tel side when connect message recieved from IP side. Access: Instant. AC INI-Param: TELCONNECTCODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.9 | ScalarvmDigitPatternVmDigitPatternOnBusyExternal | read-write | current | Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusyExt |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.10 | ScalarvmDigitPatternVmDigitPatternOnNoAnswerExternal | read-write | current | Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswerExt |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.11 | ScalarvmDigitPatternVmDigitPatternOnDNDExternal | read-write | current | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDNDExt |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.12 | ScalarvmDigitPatternVmDigitPatternNoReasonExternal | read-write | current | Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReasonExt |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.13 | ScalarvmDigitPatternDigitToIgnore | read-write | current | A digit (0-9,A-D,* or #) that if received as Src (S) or Redirect (R), the digit is ignored and not added to that number. Used in DTMF VoiceMail. Access: Instan… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.21 | NodevmMWI | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.1 | ScalarvmMWIOnCode | read-write | current | Digit pattern used to notify PBX about messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOnCode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.2 | ScalarvmMWIOffCode | read-write | current | Digit pattern used to notify PBX about no messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOffCode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.3 | ScalarvmMWISuffixCode | read-write | current | MWI suffix code used to notify PBX about messages waiting for extension (added as suffix to the extention number). Access: Instant. AC INI-Param: MWISuffixCode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.4 | ScalarvmMWISourceNumber | read-write | current | The phone number sent as source number toward PSTN for MWI setup. Access: Instant. AC INI-Param: MWISOURCENUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.22 | NodevmSMDI | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.1 | ScalarvmSMDIEnable | read-write | current | Enables the Simplified Message Desk Interface (SMDI). SMDI defines a method whereby telephony systems can provide voice-messaging systems with data required by… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.2 | ScalarvmSMDITimeOut | read-write | current | Time out <mSec> for: 1. From SMDI Info until SETUP 2. From SETUP until SMDI event. Access: Instant. AC INI-Param: SMDITimeOut |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17 | NodedigitalGWext | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.1 | ScalardigitalGWextEnableQSIGTunneling | read-write | current | Enables QSIG Tunneling over SIP. Access: Instant. AC INI-Param: ENABLEQSIGTUNNELING |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.2 | ScalardigitalGWextRemoveCLIWhenRestricted | read-write | current | Removes CLI from IP->TEL calls if received CLI is restricted. Access: Instant. AC INI-Param: REMOVECLIWHENRESTRICTED |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.3 | ScalardigitalGWextDefaultCauseMapISDN2IP | read-write | current | All ISDN release causes except normal, busy, no user responding, and no answer will be mapped to this cause, if set. Access: Instant. AC INI-Param: DEFAULTCAUS… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.4 | ScalardigitalGWextISDNSubaddressFormat | read-write | current | ISDN SubAdress format. Access: Instant. AC INI-Param: ISDNSUBADDRESSFORMAT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.5 | ScalardigitalGWextEnableAoC | read-write | current | Enable AoC-D and AoC-E from ISDN to SIP. Access: Instant. AC INI-Param: ENABLEAOC |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.6 | ScalardigitalGWextRemoveCallingName | read-write | current | If set to 1 - Removes Calling Name from IP->TEL calls. Access: Instant. AC INI-Param: REMOVECALLINGNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.7 | ScalardigitalGWextCopyDest2RedirectNumber | read-write | current | 0 - Redirect N not affected,1- Called N after manipulation from TEL2IP call will also be used as Redirect N,2 - the Called N before manipulation - as Redirect … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.8 | ScalardigitalGWextTDMOverIPMinCallsForTrunkActivation | read-write | current | Minimum connected calls for trunk activation while in TDMOverIPMode if 0 - trunk is always active. Access: Instant. AC INI-Param: TDMOVERIPMINCALLSFORTRUNKACTI… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.21 | TablertpOnlyModeForTrunkTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1 | RowrtpOnlyModeForTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.1 | ColumnrtpOnlyModeForTrunkIndex | not-accessible | current | Trunk number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.2 | ColumnrtpOnlyModeForTrunkRtpOnlyModeForTrunk | read-write | current | immediately. -1 - takes the RTPONLYMODE global value per gatewa 0 - regular call establishment. 1 - The RTP channel open for Rx & Tx. 2-The RTP channel open on… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.22 | TableacBChannelNegotiationForTrunkTable | not-accessible | current | B-Channel Negotiation for Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1 | RowacBChannelNegotiationForTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.1 | ColumnacBChannelNegotiationForTrunkIndex | not-accessible | current | Trunk number starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.2 | ColumnacBChannelNegotiationForTrunkMode | read-write | current | ISDN B-Channel negotiation mode for trunk put MODE_NOT_SET (-1) to use BCHANNELNEGOTIATION per Gateway. Access: Instant. AC INI-Param: BCHANNELNEGOTIATIONFORTR… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.23 | TableacDigitalOOSBehaviorForTrunkTable | not-accessible | current | Digital OOS Behavior for Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1 | RowacDigitalOOSBehaviorForTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.1 | ColumnacDigitalOOSBehaviorForTrunkIndex | not-accessible | current | Trunk number starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.2 | ColumnacDigitalOOSBehaviorForTrunkValue | read-write | current | Digital OOS Behavior for trunk put OOS_NOT_SET (-1) to use DIGITALOOSBEHAVIOR per Gateway. Access: Instant. AC INI-Param: DIGITALOOSBEHAVIORFORTRUNK |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.24 | TableacRemoveCallingNameForTrunkTable | not-accessible | current | Remove Calling Name For Trunk table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1 | RowacRemoveCallingNameForTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.1 | ColumnacRemoveCallingNameForTrunkIndex | not-accessible | current | Trunk number starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.2 | ColumnacRemoveCallingNameForTrunkMode | read-write | current | Remove Calling Name For Trunk table .Set (-1) to use the global parameter digitalGWextRemoveCallingName. Access: Instant. AC INI-Param: RemoveCallingNameForTru… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18 | NodegwSecurity | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.1 | ScalargwSecurityMediaSecurityBehavior | read-write | current | Gateway behavior when recieving offer/response for media encryption. Access: Instant. AC INI-Param: MEDIASECURITYBEHAVIOUR |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.2 | ScalargwSecuritySIPSRequireClientCertificate | read-write | current | Should require client certificate upon TLS connection request arrival. Access: Offline. AC INI-Param: SIPSREQUIRECLIENTCERTIFICATE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.3 | ScalargwSecurityTLSReHandshakeInterval | read-write | current | The interval between consequent TLS re-handshakes (Minutes). 0 - Disables re-handshakes. Access: Instant. AC INI-Param: TLSREHANDSHAKEINTERVAL |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.4 | ScalargwSecurityPeerHostNameVerificationMode | read-write | current | While using TLS, defines the verification behavior of the host name sent in the certificate. Access: Instant. AC INI-Param: PEERHOSTNAMEVERIFICATIONMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.5 | ScalargwSecurityVerifyServerCertificate | read-write | current | Certificate validation behavior 0 � No certificate validation. 1 � Server certificate validation. Access: Instant. AC INI-Param: VERIFYSERVERCERTIFICATE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.6 | ScalargwSecurityTLSRemoteSubjectName | read-write | current | used to verify the remote peer Common Name (at certificate) when using TLS. Access: Instant. AC INI-Param: TLSREMOTESUBJECTNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.1.18.7 | ScalargwSecuritySRTPofferedSuites | read-write | current | Offered SRTP Cipher Suites. Access: Instant. AC INI-Param: SRTPOFFEREDSUITES |
| 1.3.6.1.4.1.5003.9.10.3.1.1.19 | NodeacGWRtcpXr | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.19.1 | ScalaracGWRtcpXrEscIP | read-write | current | RTCP-XR server IP address. Access: Instant. AC INI-Param: RtcpXrEscIP |
| 1.3.6.1.4.1.5003.9.10.3.1.1.19.2 | ScalaracGWRtcpXrReportMode | read-write | current | 0:rtcpxr is not sent over SIP at all 1:rtcpxr is sent over sip when call ended 2:rtcpxr is sent over sip when on periodic interval and when call ended . Access… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.19.3 | ScalaracGWRtcpXrEscTransportType | read-write | current | RtcpXrEsc transport type. Access: Instant. AC INI-Param: RTCPXRESCTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.20 | NodeacTimers | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.20.1 | ScalaracTimersIPAlertTimeout | read-write | current | Maximal time to wait for connect from IP (seconds). Access: Instant. AC INI-Param: IPALERTTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.20.2 | ScalaracTimersPSTNAlertTimeout | read-write | current | Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: PSTNALERTTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.1.21 | NodeacEmergency | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.1 | ScalaracEmergencyRegretTimeout | read-write | current | [min] Regret time for call that is marked as Emergency. Access: Instant. AC INI-Param: EmergencyRegretTimeout |
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.21 | TableacEmergencyNumbersTable | not-accessible | current | Emergency numbers table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1 | RowacEmergencyNumbersEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.1 | ColumnacEmergencyNumbersIndex | not-accessible | current | Emergency numbers, starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.2 | ColumnacEmergencyNumbersNumbers | read-write | current | Emergency numbers. Access: Instant. AC INI-Param: EmergencyNumbers |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22 | Nodeaccounts | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21 | TableaccountTable | not-accessible | current | GwApp Accounts table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1 | RowaccountEntry | not-accessible | current | table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.1 | ColumnaccountIndex | read-only | current | . AC INI-Param: Account_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.2 | ColumnaccountRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.3 | ColumnaccountAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.4 | ColumnaccountActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.5 | ColumnaccountServedTrunkGroup | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedTrunkGroup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.6 | ColumnaccountServedIPGroup | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedIPGroup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.7 | ColumnaccountServingIPGroup | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServingIPGroup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.8 | ColumnaccountUsername | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Username |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.9 | ColumnaccountPassword | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Password |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.10 | ColumnaccountHostName | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_HostName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.11 | ColumnaccountRegister | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Register |
| 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.12 | ColumnaccountContactUser | read-create | current | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ContactUser |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23 | NodeipGroups | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21 | TableipGroupTable | not-accessible | current | GwApp IP Group Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1 | RowipGroupEntry | not-accessible | current | table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.1 | ColumnipGroupIndex | read-only | current | . AC INI-Param: IPGroup_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.2 | ColumnipGroupRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.3 | ColumnipGroupAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.4 | ColumnipGroupActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.5 | ColumnipGroupType | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Type |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.6 | ColumnipGroupDescription | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Description |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.7 | ColumnipGroupProxySetId | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ProxySetId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.8 | ColumnipGroupSIPGroupName | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SIPGroupName |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.9 | ColumnipGroupContactUser | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ContactUser |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.10 | ColumnipGroupEnableSurvivability | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_EnableSurvivability |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.11 | ColumnipGroupServingIPGroup | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ServingIPGroup |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.12 | ColumnipGroupSipReRoutingMode | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SipReRoutingMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.13 | ColumnipGroupAlwaysUseRouteTable | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_AlwaysUseRouteTable |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.14 | ColumnipGroupRoutingMode | read-create | current | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_RoutingMode |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.15 | ColumnipGroupProfileId | read-create | current | Access: Instant. AC INI-Param: IPGroup_ProfileId |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.16 | ColumnipGroupMediaRealm | read-create | current | Access: Instant. AC INI-Param: IPGroup_MediaRealm |
| 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.17 | ColumnipGroupMaxNumOfRegUsers | read-create | current | Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: IPGroup_MaxNumOfRegUsers |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24 | Nodesbc | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.1 | ScalarsbcEnable | read-write | deprecated | Enables SBC functionality. Access: Instant. AC INI-Param: ENABLESBC |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.2 | ScalarsbcRegistrationTime | read-write | current | Expires value SBC responds to user with. Used when server is offline or when the user is behind NAT. Otherwise expires is defined by the server. Access: Instan… |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.3 | ScalarsbcEnableISBCApplication | read-write | current | Enables SBC functionality. Access: Offline. AC INI-Param: ENABLESBCAPPLICATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.4 | ScalarsbcEnableIIP2IPApplication | read-write | current | Enables IP2IP functionality. Access: Offline. AC INI-Param: ENABLEIP2IPAPPLICATION |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21 | TablesbcClassificationTable | not-accessible | current | GwApp Classification Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1 | RowsbcClassificationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.1 | ColumnsbcClassificationIndex | read-only | current | . AC INI-Param: Classification_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.2 | ColumnsbcClassificationRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.3 | ColumnsbcClassificationAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.4 | ColumnsbcClassificationActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.5 | ColumnsbcClassificationSrcIPGroupId | read-create | current | Source IP group ID. Access: Instant. AC INI-Param: Classification_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.6 | ColumnsbcClassificationSrcSRDId | read-create | current | Source SRD ID. Access: Instant. AC INI-Param: Classification_SrcSRDID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.7 | ColumnsbcClassificationSrcAddress | read-create | current | Source address. Access: Instant. AC INI-Param: Classification_SrcAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.8 | ColumnsbcClassificationSrcUsernamePrefix | read-create | current | Source username prefix. Access: Instant. AC INI-Param: Classification_SrcUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.9 | ColumnsbcClassificationSrcHost | read-create | current | Source host. Access: Instant. AC INI-Param: Classification_SrcHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.10 | ColumnsbcClassificationDestUsernamePrefix | read-create | current | Destination username prefix. Access: Instant. AC INI-Param: Classification_DestUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.11 | ColumnsbcClassificationDestHost | read-create | current | Destination host. Access: Instant. AC INI-Param: Classification_DestHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22 | TablesbcRoutingTable | not-accessible | current | GwApp SBC Routing Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1 | RowsbcRoutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.1 | ColumnsbcRoutingIndex | read-only | current | . AC INI-Param: IP2IPRouting_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.2 | ColumnsbcRoutingRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.3 | ColumnsbcRoutingAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.4 | ColumnsbcRoutingActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.5 | ColumnsbcRoutingSrcIPGroupId | read-create | current | Source IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.6 | ColumnsbcRoutingSrcUsernamePrefix | read-create | current | Source username prefix. Access: Instant. AC INI-Param: IP2IPRouting_SrcUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.7 | ColumnsbcRoutingSrcHost | read-create | current | Source host. Access: Instant. AC INI-Param: IP2IPRouting_SrcHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.8 | ColumnsbcRoutingDestUsernamePrefix | read-create | current | Destination username prefix. Access: Instant. AC INI-Param: IP2IPRouting_DestUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.9 | ColumnsbcRoutingDestHost | read-create | current | Destination host. Access: Instant. AC INI-Param: IP2IPRouting_DestHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.10 | ColumnsbcRoutingDestType | read-create | current | Destination type. Access: Instant. AC INI-Param: IP2IPRouting_DestType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.11 | ColumnsbcRoutingDestIPGroupId | read-create | current | Destination IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_DestIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.12 | ColumnsbcRoutingDestSRDId | read-create | current | Destination SRD ID. Access: Instant. AC INI-Param: IP2IPRouting_DestSRDID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.13 | ColumnsbcRoutingDestAddress | read-create | current | Destination Address. Access: Instant. AC INI-Param: IP2IPRouting_DestAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.14 | ColumnsbcRoutingDestPort | read-create | current | Destination Port number. Access: Instant. AC INI-Param: IP2IPRouting_DestPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.15 | ColumnsbcRoutingDestTransportType | read-create | current | Destination transport type. Access: Instant. AC INI-Param: IP2IPRouting_DestTransportType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.16 | ColumnsbcRoutingAltRouteOptions | read-create | current | Alternative Route Options. Access: Instant. AC INI-Param: IP2IPRouting_AltRouteOptions |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.17 | ColumnsbcRoutingRequestType | read-create | current | Request Type. Access: Instant. AC INI-Param: IP2IPRouting_RequestType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23 | TablesbcIP2IPInboundManipulationTable | not-accessible | current | GwApp IP Inbound Manipulation Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1 | RowsbcIP2IPInboundManipulationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.1 | ColumnsbcIP2IPInboundManipulationIndex | read-only | current | . AC INI-Param: IPInboundManipulation_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.2 | ColumnsbcIP2IPInboundManipulationRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.3 | ColumnsbcIP2IPInboundManipulationAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.4 | ColumnsbcIP2IPInboundManipulationActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.5 | ColumnsbcIP2IPInboundManipulationIsAdditionalManipulation | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_IsAdditionalManipulation |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.6 | ColumnsbcIP2IPInboundManipulationManipulatedURI | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_ManipulatedURI |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.7 | ColumnsbcIP2IPInboundManipulationSrcIPGroupID | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.8 | ColumnsbcIP2IPInboundManipulationSrcUsernamePrefix | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_SrcUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.9 | ColumnsbcIP2IPInboundManipulationSrcHost | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_SrcHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.10 | ColumnsbcIP2IPInboundManipulationDestUsernamePrefix | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_DestUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.11 | ColumnsbcIP2IPInboundManipulationDestHost | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_DestHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.12 | ColumnsbcIP2IPInboundManipulationRemoveFromLeft | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.13 | ColumnsbcIP2IPInboundManipulationRemoveFromRight | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.14 | ColumnsbcIP2IPInboundManipulationLeaveFromRight | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.15 | ColumnsbcIP2IPInboundManipulationPrefix2Add | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.16 | ColumnsbcIP2IPInboundManipulationSuffix2Add | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.17 | ColumnsbcIP2IPInboundManipulationRequestType | read-create | current | Access: Instant. AC INI-Param: IPInboundManipulation_RequestType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24 | TablesbcIP2IPOutboundManipulationTable | not-accessible | current | GwApp IP Outbound Manipulation Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1 | RowsbcIP2IPOutboundManipulationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.1 | ColumnsbcIP2IPOutboundManipulationIndex | read-only | current | . AC INI-Param: IPOutboundManipulation_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.2 | ColumnsbcIP2IPOutboundManipulationRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.3 | ColumnsbcIP2IPOutboundManipulationAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.4 | ColumnsbcIP2IPOutboundManipulationActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.5 | ColumnsbcIP2IPOutboundManipulationIsAdditionalManipulation | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_IsAdditionalManipulation |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.6 | ColumnsbcIP2IPOutboundManipulationManipulatedURI | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_ManipulatedURI |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.7 | ColumnsbcIP2IPOutboundManipulationSrcIPGroupID | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.8 | ColumnsbcIP2IPOutboundManipulationDestIPGroupID | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_DestIPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.9 | ColumnsbcIP2IPOutboundManipulationSrcUsernamePrefix | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.10 | ColumnsbcIP2IPOutboundManipulationSrcHost | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.11 | ColumnsbcIP2IPOutboundManipulationDestUsernamePrefix | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_DestUsernamePrefix |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.12 | ColumnsbcIP2IPOutboundManipulationDestHost | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_DestHost |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.13 | ColumnsbcIP2IPOutboundManipulationRemoveFromLeft | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromLeft |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.14 | ColumnsbcIP2IPOutboundManipulationRemoveFromRight | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.15 | ColumnsbcIP2IPOutboundManipulationLeaveFromRight | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.16 | ColumnsbcIP2IPOutboundManipulationPrefix2Add | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_Prefix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.17 | ColumnsbcIP2IPOutboundManipulationSuffix2Add | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_Suffix2Add |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.18 | ColumnsbcIP2IPOutboundManipulationRequestType | read-create | current | Access: Instant. AC INI-Param: IPOutboundManipulation_RequestType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25 | TablesbcAdmissionControlTable | not-accessible | current | GwApp SBC SIP Admission Control Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1 | RowsbcAdmissionControlEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.1 | ColumnsbcAdmissionControlIndex | read-only | current | . AC INI-Param: SBCAdmissionControl_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.2 | ColumnsbcAdmissionControlRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.3 | ColumnsbcAdmissionControlAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.4 | ColumnsbcAdmissionControlActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.5 | ColumnsbcAdmissionControlLimitType | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_LimitType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.6 | ColumnsbcAdmissionControlIpGroupID | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_IPGroupID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.7 | ColumnsbcAdmissionControlSrdID | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_SRDID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.8 | ColumnsbcAdmissionControlRequestType | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_RequestType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.9 | ColumnsbcAdmissionControlRequestDirection | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_RequestDirection |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.10 | ColumnsbcAdmissionControlLimit | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_Limit |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.11 | ColumnsbcAdmissionControlLimitPerUser | read-create | current | Access: Instant. AC INI-Param: SBCAdmissionControl_LimitPerUser |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26 | TablesbcMessageManipulationsTable | not-accessible | current | SBC Message Manipulations Table. |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1 | RowsbcMessageManipulationsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.1 | ColumnsbcMessageManipulationsIndex | read-only | current | . AC INI-Param: MessageManipulations_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.2 | ColumnsbcMessageManipulationsRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.3 | ColumnsbcMessageManipulationsAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.4 | ColumnsbcMessageManipulationsActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.5 | ColumnsbcMessageManipulationsManipulationSetID | read-create | current | Manipulation Set ID. Access: Instant. AC INI-Param: MessageManipulations_ManSetID |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.6 | ColumnsbcMessageManipulationsMessageType | read-create | current | Message type. Access: Instant. AC INI-Param: MessageManipulations_MessageType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.7 | ColumnsbcMessageManipulationsCondition | read-create | current | Message manipulation Condition. Access: Instant. AC INI-Param: MessageManipulations_Condition |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.8 | ColumnsbcMessageManipulationsActionSubject | read-create | current | Message manipulation Action Subject. Access: Instant. AC INI-Param: MessageManipulations_ActionSubject |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.9 | ColumnsbcMessageManipulationsActionType | read-create | current | Message manipulation Action type. Access: Instant. AC INI-Param: MessageManipulations_ActionType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.10 | ColumnsbcMessageManipulationsActionValue | read-create | current | Message manipulation Action value. Access: Instant. AC INI-Param: MessageManipulations_ActionValue |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.11 | ColumnsbcMessageManipulationsRowRole | read-create | current | Message manipulation row rule. Access: Instant. AC INI-Param: MessageManipulations_RowRole |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27 | TablesbcAlternativeRoutingReasonsTable | not-accessible | current | GwApp Reasons For Alternative Routing For SBC Application(IP to IP) Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1 | RowsbcAlternativeRoutingReasonsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.1 | ColumnsbcAlternativeRoutingReasonsIndex | read-only | current | . AC INI-Param: SBCAlternativeRoutingReasons_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.2 | ColumnsbcAlternativeRoutingReasonsRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.3 | ColumnsbcAlternativeRoutingReasonsAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.4 | ColumnsbcAlternativeRoutingReasonsActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.5 | ColumnsbcAlternativeRoutingReasonsReleaseCause | read-create | current | Release Cause. Access: Instant. AC INI-Param: SBCAlternativeRoutingReasons_ReleaseCause |
| 1.3.6.1.4.1.5003.9.10.3.1.1.25 | NodegwIPv6 | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.25.1 | ScalargwIPv6GwAppDualIPStackSDPMethod | read-write | current | 0. Always offer a single (preferrable) media IP address. 1. ANAT - Construct offer using ANAT semantics (RFC 4091 & RFC 4092) . Access: Instant. AC INI-Param: … |
| 1.3.6.1.4.1.5003.9.10.3.1.1.25.2 | ScalargwIPv6GwAppPrimaryMediaInterface | read-write | current | Primary media interface to be used within SDP. Access: Instant. AC INI-Param: PRIMARYMEDIAINTERFACE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.25.3 | ScalargwIPv6GwAppSecondaryMediaInterface | read-write | current | Secondary media interface to be used within SDP. Access: Instant. AC INI-Param: SECONDARYMEDIAINTERFACE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.25.4 | ScalargwIPv6MediaIPVersionPreference | read-write | current | Select the preferred Media IP version. Access: Instant. AC INI-Param: MEDIAIPVERSIONPREFERENCE |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26 | NodesrdSettings | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21 | TablesrdTable | not-accessible | current | GwApp Signaling Routing Domain (SRD) Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1 | RowsrdEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.1 | ColumnsrdIndex | read-only | current | . AC INI-Param: SRD_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.2 | ColumnsrdRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.3 | ColumnsrdAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.4 | ColumnsrdActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.5 | ColumnsrdName | read-create | current | GwApp Signaling Routing Domain name. Access: Instant. AC INI-Param: SRD_Name |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.6 | ColumnsrdMediaRealm | read-create | current | GwApp Signaling Routing Domain media realm. Access: Instant. AC INI-Param: SRD_MediaRealm |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.7 | ColumnsrdIntraSRDMediaAnchoring | read-create | current | Internal SRD Media Anchoring. Access: Offline. AC INI-Param: SRD_IntraSRDMediaAnchoring |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.8 | ColumnsrdBlockUnRegUsers | read-create | current | Block Calls From Unregistered User. Access: Offline. AC INI-Param: SRD_BlockUnRegUsers |
| 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.9 | ColumnsrdMaxNumOfRegUsers | read-create | current | Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: SRD_MaxNumOfRegUsers |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27 | NodesipInterfaceSettings | |||
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21 | TablesipInterfaceTable | not-accessible | current | GwApp SIP Interface Table |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1 | RowsipInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.1 | ColumnsipInterfaceIndex | read-only | current | . AC INI-Param: SIPInterface_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.2 | ColumnsipInterfaceRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.3 | ColumnsipInterfaceAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.4 | ColumnsipInterfaceActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.5 | ColumnsipInterfaceNetworkInterface | read-create | current | Network Interface. Access: Instant. AC INI-Param: SIPInterface_NetworkInterface |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.6 | ColumnsipInterfaceApplicationType | read-create | current | Application Type. Access: Instant. AC INI-Param: SIPInterface_ApplicationType |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.7 | ColumnsipInterfaceUDPPort | read-create | current | UDP Port number. Access: Instant. AC INI-Param: SIPInterface_UDPPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.8 | ColumnsipInterfaceTCPPort | read-create | current | TCP Port number. Access: Instant. AC INI-Param: SIPInterface_TCPPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.9 | ColumnsipInterfaceTLSPort | read-create | current | TLS Port number. Access: Instant. AC INI-Param: SIPInterface_TLSPort |
| 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.10 | ColumnsipInterfaceSRD | read-create | current | Access: Instant. AC INI-Param: SIPInterface_SRD |
| 1.3.6.1.4.1.5003.9.10.3.1.2 | Nodesip | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.1 | NodesipProxy | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.1 | ScalarsipProxyUsed | read-write | current | Is SIP Proxy used. Access: Instant. AC INI-Param: ISPROXYUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.2 | ScalarsipProxyEnableKeepAlive | read-write | current | Enable Proxy Keep-Alive over OPTIONS method or REGISTER method. Access: Instant. AC INI-Param: ENABLEPROXYKEEPALIVE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.3 | ScalarsipProxyName | read-write | current | SIP Proxy name. Access: Instant. AC INI-Param: PROXYNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.4 | ScalarsipProxyIsHotSwap | read-write | current | Enable Proxy Hot-Swap mode. Access: Instant. AC INI-Param: ISPROXYHOTSWAP |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.5 | ScalarsipProxyHotSwapRtx | read-write | current | Number of Rtx before Hotswap is performed. Access: Instant. AC INI-Param: PROXYHOTSWAPRTX |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.6 | ScalarsipProxyRedundancyMode | read-write | current | Redundancy Mode - Parking on active proxy or switching to main Proxy whenever online. Access: Instant. AC INI-Param: PROXYREDUNDANCYMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.7 | ScalarsipProxyAlwaysUseRouteTable | read-write | current | Always use routing table even though proxy is available. Access: Instant. AC INI-Param: ALWAYSUSEROUTETABLE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.8 | ScalarsipProxyAlwaysSendToProxy | read-write | current | Send all messages to Proxy server. Access: Instant. AC INI-Param: ALWAYSSENDTOPROXY |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.9 | ScalarsipProxyKeepAliveTime | read-write | current | Time interval between Proxy Keep-Alive messages (seconds). Access: Instant. AC INI-Param: ProxyKeepAliveTime |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.10 | ScalarsipProxyIsFallbackUsed | read-write | current | Allow fallback to internal Tel to IP routing table if Proxy is not responding. Access: Instant. AC INI-Param: IsFallbackUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.11 | ScalarsipProxySendInviteToProxy | read-write | current | Always send INVITE messages to Proxy server. Access: Instant. AC INI-Param: SENDINVITETOPROXY |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.12 | ScalarsipProxyIsTrustedProxy | read-write | current | Determine whether the proxy is a trusted node. Access: Instant. AC INI-Param: ISTRUSTEDPROXY |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.13 | ScalarsipProxyUseGatewayNameForOptions | read-write | current | Use Gateway name (instead of IP address) in Keep-Alive OPTIONS messages. Access: Instant. AC INI-Param: USEGATEWAYNAMEFOROPTIONS |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.14 | ScalarsipProxyEnableSRVQuery | read-write | obsolete | Enable DNS SRV queries for Proxy domain name. Access: Instant. AC INI-Param: ENABLEPROXYSRVQUERY |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.15 | ScalarsipProxyDNSQueryType | read-write | current | DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.16 | ScalarsipProxyLoadBalancingMethod | read-write | current | Method of the proxies load balancing: 0 - Disabled (default) 1 - RoundRobin 2 - Random SRV Weights. Access: Instant. AC INI-Param: PROXYLOADBALANCINGMETHOD |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.17 | ScalarsipProxyIPListRefreshTime | read-write | current | Time interval between refresh of proxies list (seconds). For example SRV query will be done every ProxyIPListRefreshTime seconds. Access: Instant. AC INI-Param… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21 | TableproxyIPTable | not-accessible | current | The table defines phone numbers for gateway endpoints. The endpoints that aren�t defined will be disabled. |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1 | RowproxyIPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.1 | ColumnproxyIPIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: ProxyIp_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.2 | ColumnproxyIPRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.3 | ColumnproxyIPAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.4 | ColumnproxyIPActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.5 | ColumnproxyIPProxyIP | read-create | current | Access: Instant. AC INI-Param: ProxyIp_IpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22 | TablesipProxySetTable | not-accessible | current | GwApp Proxy Set Table |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1 | RowsipProxySetEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.1 | ColumnsipProxySetIndex | not-accessible | current | AC INI-Param: ProxySet_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.2 | ColumnsipProxySetRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.3 | ColumnsipProxySetAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.4 | ColumnsipProxySetActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.5 | ColumnsipProxySetEnableProxyKeepAlive | read-create | current | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_EnableProxyKeepAlive |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.6 | ColumnsipProxySetProxyKeepAliveTime | read-create | current | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyKeepAliveTime |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.7 | ColumnsipProxySetProxyLoadBalancingMethod | read-create | current | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyLoadBalancingMethod |
| 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.8 | ColumnsipProxySetIsProxyHotSwap | read-create | current | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_IsProxyHotSwap |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2 | NodesipDTMF | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.1 | ScalarsipDTMFIsHookFlashUsed | read-write | obsolete | Detect and send Hook-Flash as Out-of-Band message. Access: Instant. AC INI-Param: ISHOOKFLASHUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.2 | ScalarsipDTMFIsDTMFUsed | read-write | obsolete | Send DTMFs on the Signaling path (not on the Media path). Access: Instant. AC INI-Param: ISDTMFUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.3 | ScalarsipDTMFOutOfBandDtmfFormat | read-write | obsolete | DTMF Out-of-Band transport method. Access: Instant. AC INI-Param: OUTOFBANDDTMFFORMAT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.4 | ScalarsipDTMFDisableAutoMute | read-write | current | Disables inband auto mute of DTMFs when signalling is used for sending DTMFs. Access: Instant. AC INI-Param: DISABLEAUTODTMFMUTE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.5 | ScalarsipDTMFRxDTMFOption | read-write | current | Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: RXDTMFOPTION |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.6 | ScalarsipDTMFHookFlashOption | read-write | current | Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.7 | ScalarsipDTMFUseDigitForSpecialDTMF | read-write | current | Indicates whether a special DTMF, sent with INFO(Cisco), is sent using its digit representation or not. Access: Instant. AC INI-Param: USEDIGITFORSPECIALDTMF |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.8 | ScalarsipDTMFMinRoutingOverlapDigits | read-write | current | Minimum number of overlap digits before routing. Access: Instant. AC INI-Param: MINOVERLAPDIGITSFORROUTING |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.9 | ScalarsipDTMFISDNOverlapIPtoTelDialing | read-write | current | Enable ISDN Overlap IP to Tel Dialing. Access: Instant. AC INI-Param: ISDNTXOVERLAP |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21 | TablesipTxDTMFOptionTable | not-accessible | current | The names of the five possible coders. |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1 | RowsipTxDTMFOptionEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.1 | ColumnsipTxDTMFOptionIndex | not-accessible | current | Entry number, starting at 0. AC INI-Param: TxDtmfOption_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.2 | ColumnsipTxDTMFOptionRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.3 | ColumnsipTxDTMFOptionAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.4 | ColumnsipTxDTMFOptionActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.5 | ColumnsipTxDTMFOptionValue | read-create | current | Transmit DTMF option. Access: Instant. AC INI-Param: TxDtmfOption_Type |
| 1.3.6.1.4.1.5003.9.10.3.1.2.3 | NodesipPorts | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.3.1 | ScalarsipPortsDestinationPort | read-write | current | Default SIP destination port (usually 5060). Access: Instant. AC INI-Param: SIPDESTINATIONPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.3.2 | ScalarsipPortsLocalSipPort | read-write | current | Local SIP port used for signaling. Access: Instant. AC INI-Param: LOCALSIPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.3.3 | ScalarsipPortsTCPLocalSipPort | read-write | current | Local SIP port used for signaling. Access: Instant. AC INI-Param: TCPLOCALSIPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.3.4 | ScalarsipPortsTLSLocalSipPort | read-write | current | Local TLS SIP port used for signaling. Access: Instant. AC INI-Param: TLSLOCALSIPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4 | NodesipAuth | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.1 | ScalarsipAuthMode | read-write | current | Authentication mode. Access: Instant. AC INI-Param: AUTHENTICATIONMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.2 | ScalarsipAuthUserName | read-write | current | User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.3 | ScalarsipAuthPassword | read-write | current | Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.4 | ScalarsipAuthCnonce | read-write | current | Cnonce parameter used for authentication. Access: Instant. AC INI-Param: CNONCE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.5 | ScalarsipAuthMutualAuthenticationMode | read-write | current | Mutual Authentication Mode: 0 - Optional, 1 - Mandatory. Access: Instant. AC INI-Param: MUTUALAUTHENTICATIONMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.6 | ScalarsipAuthChallengeCachingMode | read-write | current | 0. No caching mode � don't cache any challenges. Every new request will be sent without preliminary authorization. If the request is challenged � new reque… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21 | TableauthTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1 | RowauthEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.1 | ColumnauthIndex | read-only | current | Entry number, starting at 0. AC INI-Param: Authentication_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.2 | ColumnauthIsUsed | read-write | current | Is this index used. Access: Offline. AC INI-Param: Authentication_IsUsed |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.3 | ColumnauthAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.4 | ColumnauthActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.5 | ColumnauthUserID | read-write | current | Access: Instant. AC INI-Param: Authentication_UserId |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.6 | ColumnauthUserPassword | read-write | current | Access: Instant. AC INI-Param: Authentication_UserPassword |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.7 | ColumnauthModule | read-only | current | Module. AC INI-Param: Authentication_Module |
| 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.8 | ColumnauthPort | read-only | current | Port. AC INI-Param: Authentication_Port |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5 | NodesipRetransmission | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.1 | ScalarsipRetransmissionT1Rtx | read-write | current | SIP T1 timeout for retransmission. Access: Instant. AC INI-Param: SIPT1RTX |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.2 | ScalarsipRetransmissionT2Rtx | read-write | current | SIP T2 timeout for retransmission. Access: Instant. AC INI-Param: SIPT2RTX |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.3 | ScalarsipRetransmissionSipMaxRtx | read-write | current | Maximum number of retransmissions. Access: Instant. AC INI-Param: SipMaxRtx |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.4 | ScalarsipRetransmissionIsRtxEnable | read-write | current | is Rtx timer enabled. Access: Instant. AC INI-Param: ISRTXENABLE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.5 | ScalarsipRetransmissionEnablePTime | read-write | current | is ptime parameter needed in sdp. Access: Instant. AC INI-Param: ENABLEPTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.6 | ScalarsipRetransmissionTCPTimeout | read-write | current | SIP TCP time out (influence timerB and Timer F). Access: Instant. AC INI-Param: SIPTCPTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.5.7 | ScalarsipRetransmissionRetryAfterTime | read-write | current | Retry After time for the proxy to be in state Unavailable. Access: Instant. AC INI-Param: RETRYAFTERTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6 | NodesipRegistration | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.1 | ScalarsipRegistrationIsNeeded | read-write | current | Is Proxy registration necessary. Access: Instant. AC INI-Param: ISREGISTERNEEDED |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.2 | ScalarsipRegistrationIP | read-write | current | SIP Registrar IP address. Access: Instant. AC INI-Param: REGISTRARIP |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.3 | ScalarsipRegistrationTime | read-write | current | Time for which registration to Gatekeeper/Proxy is valid. Causes periodic registration (seconds). Access: Instant. AC INI-Param: RegistrationTime |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.4 | ScalarsipRegistrationRegistrationRetryTime | read-write | current | Time in which the gateway will try to register after last registration failure (seconds). Access: Instant. AC INI-Param: REGISTRATIONRETRYTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.5 | ScalarsipRegistrationRegistrarName | read-write | current | SIP Registrar name. Access: Instant. AC INI-Param: REGISTRARNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.6 | ScalarsipRegistrationTimeDivider | read-write | current | Percentage of RegistrationTime when the actual new REGISTER request will be sent out. Access: Instant. AC INI-Param: REGISTRATIONTIMEDIVIDER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.7 | ScalarsipRegistrationName | read-write | current | Gateway registration name. Access: Instant. AC INI-Param: GWREGISTRATIONNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.8 | ScalarsipRegistrationRegisterOnInviteFailure | read-write | current | Enable ReRegister upon INVITE transaction failure. Access: Instant. AC INI-Param: REGISTERONINVITEFAILURE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.9 | ScalarsipRegistrationTimeThreshold | read-write | current | If (REGISTRATIONTIMETHRESHOLD > 0) and (REGISTRATIONTIMETHRESHOLD < computed registration time using existing logic) then new registration time will be (Regist… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.10 | ScalarsipRegistrationRegistrarTransportType | read-write | current | Registrar transport type. Access: Instant. AC INI-Param: REGISTRARTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.6.11 | ScalarsipRegistrationReRegisterOnConnectionFailure | read-write | current | Enables GW to perform Re-Registeration on TCP/TLS connection failure. Access: Instant. AC INI-Param: REREGISTERONCONNECTIONFAILURE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7 | NodesipMisc | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.1 | ScalarsipMiscEnableEarlyMedia | read-write | current | Enable Early Media. Access: Instant. AC INI-Param: ENABLEEARLYMEDIA |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.2 | ScalarsipMiscSipSessionExpires | read-write | current | The SIP session will be refreshed (using INVITE) each time this timer expires (seconds). Access: Instant. AC INI-Param: SIPSESSIONEXPIRES |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.3 | ScalarsipMiscIsUserPhone | read-write | current | Add User=Phone parameter to SIP URL. Access: Instant. AC INI-Param: ISUSERPHONE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.4 | ScalarsipMiscGatewayName | read-write | current | Gateway name. Access: Instant. AC INI-Param: SIPGATEWAYNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.5 | ScalarsipMiscPrackMode | read-write | current | PRACK mechanism mode for 1XX reliable responses: 0- Disabled , 1- Supported , 2- Required. Access: Instant. AC INI-Param: PrackMode |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.6 | ScalarsipMiscEnableRpiHeader | read-write | current | Enable Remote-Party-ID header. Access: Instant. AC INI-Param: ENABLERPIHEADER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.7 | ScalarsipMiscXChannelHeader | read-write | current | 0 (default): No special header 1:Add special header for trunk and B-Channel. Access: Instant. AC INI-Param: XCHANNELHEADER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.8 | ScalarsipMiscAssertedIDMode | read-write | current | Select Asserted Identity header method. Access: Instant. AC INI-Param: ASSERTEDIDMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.9 | ScalarsipMiscIsUserPhoneInFrom | read-write | current | Add 'User=Phone' to From header. Access: Instant. AC INI-Param: ISUSERPHONEINFROM |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.10 | ScalarsipMiscAddTon2Rpi | read-write | current | Add Number Type and Plan to Remote-Party-ID header. Access: Instant. AC INI-Param: ADDTON2RPI |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.11 | ScalarsipMiscEnableCIC | read-write | current | Enables CIC -> ISDN TNS IE interworking. Access: Instant. AC INI-Param: ENABLECIC |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.12 | ScalarsipMiscTransportType | read-write | current | SIP transport type. Access: Instant. AC INI-Param: SIPTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.13 | ScalarsipMiscISubNumberOfDigits | read-write | current | Number of digits that will be taken from end of phone number as Subaddress. Access: Instant. AC INI-Param: ISUBNUMBEROFDIGITS |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.14 | ScalarsipMiscSIP183Behaviour | read-write | current | If this parameter set to 1, ALERT to ISDN will be sent upon 183 receive. Access: Instant. AC INI-Param: SIP183BEHAVIOUR |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.15 | ScalarsipMiscUseToHeaderAsCalledNum | read-write | current | Use the user part of To header URL as called number (IP->TEL). Access: Instant. AC INI-Param: ISUSETOHEADERASCALLEDNUMBER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.16 | ScalarsipMiscEnableSIPS | read-write | current | Enable SIP secured URI usage. Access: Instant. AC INI-Param: ENABLESIPS |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.17 | ScalarsipMiscEnableSRVQuery | read-write | obsolete | Enable DNS SRV queries. Access: Instant. AC INI-Param: ENABLESRVQUERY |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.18 | ScalarsipMiscSubject | read-write | current | User-defined sip subject. Access: Instant. AC INI-Param: SIPSUBJECT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.19 | ScalarsipMiscUseSIPTgrp | read-write | current | Use TGRP parameter 0 - disable [Default] , 1 - send only , 2 - send and use if in the RequestURI when receiving INVITE, 3 - Nortel Hotline. Access: Instant. AC… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.20 | ScalarsipMiscSend180ForCallWaiting | read-write | current | Send 180 for call waiting. Used for parties that do not support 182. Access: Instant. AC INI-Param: SEND180FORCALLWAITING |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.21 | ScalarsipMiscUserAgentDisplayInfo | read-write | current | String that will be displayed in the SIP Header 'User-Agent' or 'Server'. Access: Instant. AC INI-Param: USERAGENTDISPLAYINFO |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.22 | ScalarsipMiscSessionExpiresMethod | read-write | current | Determines the Method which the SIP session will be using to referesh the session. Access: Instant. AC INI-Param: SESSIONEXPIRESMETHOD |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.23 | ScalarsipMiscEnableGRUU | read-write | current | Obtain and use GRUU (Global Routable UserAgentURIs). Access: Instant. AC INI-Param: ENABLEGRUU |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.24 | ScalarsipMiscDNSQueryType | read-write | current | DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.25 | ScalarsipMiscEnableHistoryInfo | read-write | current | Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEHISTORYINFO |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.26 | ScalarsipMiscEnableTCPConnectionReuse | read-write | current | Enable reuse of TCP connection. Access: Instant. AC INI-Param: ENABLETCPCONNECTIONREUSE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.27 | ScalarsipMiscComfortNoiseNegotiation | read-write | current | is CN payload type is used and being negotiate. Access: Instant. AC INI-Param: COMFORTNOISENEGOTIATION |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.28 | ScalarsipMiscMultiPtimeFormat | read-write | current | Format of multiple ptime (ptime per coder) in outgoing SDP. Access: Instant. AC INI-Param: MULTIPTIMEFORMAT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.29 | ScalarsipMiscRTPOnlyMode | read-write | current | On RTP only mode their is no signalling protocol (for media parameters negotiation with the remote side). The channel is open immediately. The IP for the media… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.30 | ScalarsipMiscEnableReasonHeader | read-write | current | Enable Reason header in the outgoing messages. Access: Instant. AC INI-Param: ENABLEREASONHEADER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.31 | ScalarsipMisc3xxBehavior | read-write | current | 3xx response behavior: Forwarding behavior - use different call identifiers Redirect behavior - use the same call identifiers: From, To & CallID. Access: Insta… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.32 | ScalarsipMiscEnableSemiAttendedTransfer | read-write | current | Semi-Attended Transfer when the session to the Target is not established. false - Use REFER with Replaces. true - Use CANCEL and REFER without Replaces if sess… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.33 | ScalarsipMiscUseSIPURIForDiversionHeader | read-write | current | Use Tel uri or Sip uri for Diversion header. Access: Instant. AC INI-Param: UseSIPURIForDiversionHeader |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.34 | ScalarsipMiscEnableVMURI | read-write | current | Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEVMURI |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.35 | ScalarsipMiscEnablePChargingVector | read-write | current | Generate P-Charging-Vector header [0] - disabled [1] - enabled. Access: Instant. AC INI-Param: ENABLEPCHARGINGVECTOR |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.36 | ScalarsipMiscPAssertedUserName | read-write | current | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: PASSERTEDUSERNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.37 | ScalarsipMiscSDPSessionOwner | read-write | current | The SDP owner string. Access: Instant. AC INI-Param: SIPSDPSESSIONOWNER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.38 | ScalarsipMiscResetOnINIFileDownload | read-write | obsolete | Determine if Reset after INI File Download is execute. Access: Instant. AC INI-Param: ResetOnINIFileDownload |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.39 | ScalarsipMiscSetDefaultOnIniFileProcess | read-write | current | Determine if all parameters are set to their defaults before processing updated INI File. Access: Instant. AC INI-Param: SetDefaultOnIniFileProcess |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.40 | ScalarsipMiscEnableContactRestriction | read-write | current | Hides the user part of the URI in the Contact Header 0 - Disable 1 - Enable. Access: Instant. AC INI-Param: ENABLECONTACTRESTRICTION |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.41 | ScalarsipMiscEnablePAssociatedURIHeader | read-write | current | Handles the P-Associated-URI header in a 200OK response for a REGISTER request. Access: Instant. AC INI-Param: ENABLEPASSOCIATEDURIHEADER |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.42 | ScalarsipMiscMinSE | read-write | current | Minimal value for session refresh. Access: Instant. AC INI-Param: MINSE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.43 | ScalarsipMiscApplicationProfile | read-write | current | ApplicationProfile, read it later for validating that the board is theirs. Access: Offline. AC INI-Param: APPLICATIONPROFILE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.44 | ScalarsipMiscOPTIONSUserPart | read-write | current | Allow to configure the OPTIONS userpart string for all gateways. The default value should be empty string which means that we don't use this parameter. Another… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.45 | ScalarsipMiscUseAORInReferToHeader | read-write | current | If enabled, we will use URI from To/From headers in Refer-To header. If disabled, we will take the URI from Contact. Access: Instant. AC INI-Param: USEAORINREF… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.46 | ScalarsipMiscForkingHandlingMode | read-write | current | Decides the handling method to 18X response to forking 0 - Parallel handling - only the first 18X response is handled 1 - Sequential handling - all the 18X res… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.47 | ScalarsipMiscOfferUnencryptedSRTCP | read-write | obsolete | If set to 1, the 'crypto' attribute includes the UNENCRYPTED_SRTCP parameter. If set to 1, the UNENCRYPTED_SRTCP parameter is not included. Access: Instant. AC… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.7.48 | ScalarsipMiscSourceNumberPreference | read-write | current | Determines from where the source number shall be taken from (in an incoming INVITE request). Parameter values: - NULL: no changes in current logic - FROM: sour… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.8 | NodesipSubscribe | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.8.1 | ScalarsipSubscribeEnable | read-write | current | This parameter related to Subscribe/UnSubscribe buttons. Access: Instant. AC INI-Param: SHOULDSUBSCRIBE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.8.2 | ScalarsipSubscribeRetryTime | read-write | current | MWI service subscription retry time after last subscription failure (seconds). Access: Instant. AC INI-Param: SUBSCRIBERETRYTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.8.3 | ScalarsipSubscribeEnableMWISubscription | read-write | current | Enable subscription for Message Waiting Indicator service. Access: Instant. AC INI-Param: ENABLEMWISUBSCRIPTION |
| 1.3.6.1.4.1.5003.9.10.3.1.2.8.4 | ScalarsipSubscribeSubscriptionMode | read-write | current | Subscription Mode: 0 - Per Endpoint, 1 - Per Gateway. Access: Instant. AC INI-Param: SUBSCRIPTIONMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9 | NodesipDigitalGW | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21 | TablecauseMapSIP2ISDNTable | not-accessible | current | Cause Map SIP to ISDN Table. |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1 | RowcauseMapSIP2ISDNEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.1 | ColumncauseMapSIP2ISDNIndex | not-accessible | current | AC INI-Param: CauseMapSip2Isdn_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.2 | ColumncauseMapSIP2ISDNRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.3 | ColumncauseMapSIP2ISDNAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.4 | ColumncauseMapSIP2ISDNActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.5 | ColumncauseMapSIP2ISDNSIPResponse | read-write | current | Access: Instant. AC INI-Param: CauseMapSip2Isdn_SipResponse |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.6 | ColumncauseMapSIP2ISDNQ850Cause | read-write | current | Access: Instant. AC INI-Param: CauseMapSip2Isdn_IsdnReleaseCause |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22 | TablecauseMapISDN2SIPTable | not-accessible | current | Cause Map SIP to ISDN Table. |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1 | RowcauseMapISDN2SIPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.1 | ColumncauseMapISDN2SIPIndex | not-accessible | current | AC INI-Param: CauseMapIsdn2Sip_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.2 | ColumncauseMapISDN2SIPRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.3 | ColumncauseMapISDN2SIPAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.4 | ColumncauseMapISDN2SIPActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.5 | ColumncauseMapISDN2SIPQ850Cause | read-write | current | Access: Instant. AC INI-Param: CauseMapIsdn2Sip_IsdnReleaseCause |
| 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.6 | ColumncauseMapISDN2SIPSIPResponse | read-write | current | Access: Instant. AC INI-Param: CauseMapIsdn2Sip_SipResponse |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10 | NodesipSAS | |||
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.1 | ScalarsipSASEnable | read-write | current | Enables SAS functionality. Access: Offline. AC INI-Param: ENABLESAS |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.2 | ScalarsipSASLocalSIPUdpPort | read-write | current | Local SAS SIP port used for signaling over UDP. Access: Instant. AC INI-Param: SASLOCALSIPUDPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.3 | ScalarsipSASDefaultGatewayIP | read-write | current | SIP SAS default IP address for incoming requests in emergency mode. Access: Instant. AC INI-Param: SASDEFAULTGATEWAYIP |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.4 | ScalarsipSASLocalSIPTlsPort | read-write | current | Local SAS SIP port used for signaling over TLS. Access: Instant. AC INI-Param: SASLOCALSIPTLSPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.5 | ScalarsipSASRegistrationTime | read-write | current | SAS will send this value in expires header while working in emergency mode. Access: Instant. AC INI-Param: SASREGISTRATIONTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.6 | ScalarsipSASShortNumberLength | read-write | deprecated | Upon incoming request the user info in the request is compared to the registered one. SAS performs comparison of the arrived user info with the suffix of the r… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.7 | ScalarsipSASLocalSIPTcpPort | read-write | current | Local SAS SIP port used for signaling over TCP. Access: Instant. AC INI-Param: SASLOCALSIPTCPPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.8 | ScalarsipSASProxySet | read-write | current | Proxy Set Id for SAS. Access: Instant. AC INI-Param: SASPROXYSET |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.9 | ScalarsipSASRedundantProxySet | read-write | current | Proxy Set Id for Redundant SAS. Access: Instant. AC INI-Param: REDUNDANTSASPROXYSET |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.10 | ScalarsipSASBindingMode | read-write | current | Defines the SAS database binding mode: 0 - URI dependant 1 - according to user part. Access: Instant. AC INI-Param: SASBINDINGMODE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.11 | ScalarsipSASSurvivabilityMode | read-write | current | Defines the SAS working mode: 0 � Standard Mode (working with configured proxy set) 1 � Always emergency mode (working without proxy) 2 � Ignore REGISTER… |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.12 | ScalarsipSASEnableENUM | read-write | current | Enables SAS to perform ENUM query when receiving INVITE messages in emergency mode. Access: Instant. AC INI-Param: SASENABLEENUM |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.13 | ScalarsipSASEnableRecordRoute | read-write | current | Enables SAS to add record-Route header to requests. Access: Instant. AC INI-Param: SASENABLERECORDROUTE |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21 | TablesasRegistrationManipulationTable | not-accessible | current | GWAPP SAS Registration Manipulation Table. |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1 | RowsasRegistrationManipulationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.1 | ColumnsasRegistrationManipulationIndex | not-accessible | current | AC INI-Param: SASRegistrationManipulation_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.2 | ColumnsasRegistrationManipulationRowStatus | read-create | current | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.3 | ColumnsasRegistrationManipulationAction | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.4 | ColumnsasRegistrationManipulationActionResult | read-only | current | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.5 | ColumnsasRegistrationManipulationRemoveFromRight | read-create | current | Access: Instant. AC INI-Param: SASRegistrationManipulation_RemoveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.6 | ColumnsasRegistrationManipulationLeaveFromRight | read-create | current | Access: Instant. AC INI-Param: SASRegistrationManipulation_LeaveFromRight |
| 1.3.6.1.4.1.5003.9.10.3.1.3 | Nodeh323 | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.1 | Scalarh323SourceEncodType | read-write | obsolete | Calling number coding type in Setup message. Access: Instant. AC INI-Param: SOURCEENCODTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.3.2 | Scalarh323DestEncodType | read-write | obsolete | Called number coding type in Setup message. Access: Instant. AC INI-Param: DESTENCODTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.3.3 | Scalarh323H323IDString | read-write | obsolete | Definition of Gateway H.323-ID source field. Access: Instant. AC INI-Param: H323IDSTRING |
| 1.3.6.1.4.1.5003.9.10.3.1.3.10 | Nodeh323ConnectionModes | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.1 | Scalarh323ConnectionModesIsTunnelingUsed | read-write | obsolete | Use H.323 Tunneling call setup procedure. Access: Instant. AC INI-Param: ISTUNNELINGUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.5 | NodefastStart | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.1 | ScalarfastStartIsFastConnectUsed | read-write | obsolete | Use H.323 Fast Start call setup procedure. Access: Instant. AC INI-Param: ISFASTCONNECTUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.2 | ScalarfastStartOpenH245OnFS | read-write | obsolete | Open H.245 when using Fast Start call setup procedure. Access: Instant. AC INI-Param: OPENH245ONFS |
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.3 | ScalarfastStartIsFSMediaInfoSendOnConnect | read-write | obsolete | Is Fast start Media sent in in Connect or in Alert. Access: Instant. AC INI-Param: ISFSMEDIAINFOSENDONCONNECT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.4 | ScalarfastStartIsFSOpenMediaOnConnect | read-write | obsolete | Open voice channel afer sending Connect or after sending Alert. Access: Instant. AC INI-Param: ISFSOPENMEDIAONCONNECT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11 | Nodeh323GK | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.1 | Scalarh323GKIsGateKeeperUsed | read-write | obsolete | Is gateway using a H.323 Gatekeeper. Access: Offline. AC INI-Param: ISGATEKEEPERUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.2 | Scalarh323GKGwRegistrType | read-write | obsolete | Type of Gatekeeper registration. Access: Instant. AC INI-Param: GWREGISTRTYPE |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.3 | Scalarh323GKIsGkFallbackUsed | read-write | obsolete | Allow fallback to internal Tel to IP routing table if Gatekeeper/Proxy is not responding. Access: Offline. AC INI-Param: ISFALLBACKUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.4 | Scalarh323GKCanMapAliases | read-write | obsolete | If enabled, Gatekeeper can change gateway destination number using the Alias parameter in ACF message. Access: Instant. AC INI-Param: CANMAPALIASES |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.5 | Scalarh323GKResponseTimeout | read-write | obsolete | Time in which the gateway waits for a RAS response from the Gatekeeper before retransmission (seconds). Access: Instant. AC INI-Param: RESPONSETIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.6 | Scalarh323GKMaxRetries | read-write | obsolete | Maximum number of retransmissions of RAS messages to Gatekeeper. Access: Instant. AC INI-Param: MAXRETRIES |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.7 | Scalarh323GKRegistrationTime | read-write | obsolete | Time in seconds for which registration to Gatekeeper/Proxy is valid. cause periodic registration. Access: Offline. AC INI-Param: REGISTRATIONTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.8 | Scalarh323GKIsTerminal | read-write | obsolete | The gateway registers as a H.323 terminal with multiple aliases. Otherwise, the gateway behaves as an H.323 gateway. Access: Instant. AC INI-Param: ISTERMINAL |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.9 | Scalarh323GKGatekeeperID | read-write | obsolete | Gatekeeper Identification name, to be used in Registration Request (RRQ) messages. Access: Instant. AC INI-Param: GATEKEEPERID |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.10 | Scalarh323GKEnablePregrantARQ | read-write | obsolete | ARQ message won't be sent if the Gatekeeper has pre-granted admission. Access: Instant. AC INI-Param: ENABLEPREGRANTARQ |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.11 | Scalarh323GKRegister | read-write | current | This parameter related to Register/UnRegister buttons. Access: Instant. AC INI-Param: SHOULDREGISTER |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.12 | Scalarh323GKAlternativeGKUsed | read-write | obsolete | Allows working with Alternative GK that should be provided by GK. Access: Offline. AC INI-Param: ALTERNATIVEGKUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.13 | Scalarh323GKUseRedundantGKOnRRJ | read-write | obsolete | Useredundant Gatekeeper on receiving RRJ message. Access: Offline. AC INI-Param: USEREDUNDANTGKONRRJ |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.14 | Scalarh323GKEnableGKAutoDiscovery | read-write | obsolete | Enables GK automatic discovery mechanism. Access: Offline. AC INI-Param: ENABLEGKAUTODISCOVERY |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.15 | Scalarh323GKGKAutoDiscoveryIP | read-write | obsolete | Multicast IP Address for GK automatic discovery. Access: Offline. AC INI-Param: GKAUTODISCOVERYIP |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21 | TablegkIPTable | not-accessible | obsolete | |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1 | RowgkIPEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.1 | ColumngkIPIndex | not-accessible | obsolete | Entry number, starting at 0. AC INI-Param: GateKeeperIp_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.2 | ColumngkIPRowStatus | read-create | obsolete | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Managemen… |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.3 | ColumngkIPAction | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.4 | ColumngkIPActionResult | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.5 | ColumngkIPGatekeeperIP | read-create | obsolete | IP of GK. Access: Offline. AC INI-Param: GateKeeperIp_IpAddress |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.6 | ColumngkIPGateleeperID | read-create | obsolete | ID of GK. Access: Offline. AC INI-Param: GateKeeperIp_Id |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22 | TableregisterPrefixTable | not-accessible | obsolete | The registration prefixes are applicable for Digital E1/T1 and FXO gateways for registration to Gatekeeper. If not used the gateway will register with its endp… |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1 | RowregisterPrefixEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.1 | ColumnregisterPrefixIndex | not-accessible | obsolete | Entry number, starting at 0. AC INI-Param: RegistrationPrefix_Index |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.2 | ColumnregisterPrefixRowStatus | read-create | obsolete | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Managemen… |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.3 | ColumnregisterPrefixAction | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.4 | ColumnregisterPrefixActionResult | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.5 | ColumnregisterPrefixPrefix | read-create | obsolete | Usually the prefixes will define range of PSTN/PBX phone numbers that the gateway can handle. Access: Offline. AC INI-Param: RegistrationPrefix_Prefix |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.6 | ColumnregisterPrefixNumberPlan | read-create | obsolete | Number Plan that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberPlan |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.7 | ColumnregisterPrefixNumberType | read-create | obsolete | Number Type that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberType |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.30 | NodegkRedundancy | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.1 | ScalargkRedundancyUsed | read-write | obsolete | Allow Gatekeeper redundancy. At least one redundant Gatekeeper should be defined. Access: Instant. AC INI-Param: ISREDUNDANTGKUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.2 | ScalargkRedundancyTimeBetweenGKsLoops | read-write | obsolete | Time between the gateway retries to connect to Gatekeeper if connection was lost (seconds). Access: Instant. AC INI-Param: TIMEBETWEENGKSLOOPS |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.31 | NodegkRAI | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.1 | ScalargkRAIEnable | read-write | obsolete | Enable sending of H.323 Resource Avaialable Indication message to Gatekeeper due to overload. Access: Instant. AC INI-Param: ENABLERAI |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.2 | ScalargkRAIHighThreshold | read-write | obsolete | Percentage of active calls in order to send 'Almost out of resources' RAI. Access: Instant. AC INI-Param: RAIHIGHTHRESHOLD |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.3 | ScalargkRAILowThreshold | read-write | obsolete | percentage of active calls to send 'Resources OK' RAI. Access: Instant. AC INI-Param: RAILOWTHRESHOLD |
| 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.4 | ScalargkRAILoopTime | read-write | obsolete | Time period to check call resources (seconds). Access: Instant. AC INI-Param: RAILOOPTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12 | Nodeh323DTMF | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.1 | Scalarh323DTMFHookFlashOption | read-write | obsolete | Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.2 | Scalarh323DTMFRxDtmfOption | read-write | obsolete | Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: ISFALLBACKUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21 | TabledTMFOptionsTable | not-accessible | obsolete | The names of the five possible coders. |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1 | RowdTMFOptionsEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.1 | ColumndTMFOptionsIndex | not-accessible | obsolete | Entry number, starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.2 | ColumndTMFOptionsRowStatus | read-create | obsolete | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Managemen… |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.3 | ColumndTMFOptionsAction | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.4 | ColumndTMFOptionsActionResult | read-only | obsolete | Development Impending. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.5 | ColumndTMFOptionsTxDTMFOption | read-create | obsolete | Transmit DTMF option. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.3.1.3.13 | Nodeh323Ports | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.13.1 | Scalarh323PortsH225ListenPort | read-write | obsolete | Port on which the gateway expects to receive H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225LISTENPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.13.2 | Scalarh323PortsH225DialPort | read-write | obsolete | Port on which the gateway sends H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225DIALPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.13.3 | Scalarh323PortsH323BasePort | read-write | obsolete | Defines range for gateway H.225/H.245 local port messages. Access: Offline. AC INI-Param: H323BASEPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.13.4 | Scalarh323PortsRasSourcePort | read-write | obsolete | RAS requests source port. Access: Instant. AC INI-Param: RASSOURCEPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.13.5 | Scalarh323PortsRasDestPort | read-write | obsolete | RAS requests destination port. Access: Instant. AC INI-Param: RASDESTPORT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.14 | Nodeh323Auth | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.14.1 | Scalarh323AuthEnableH235Security | read-write | obsolete | Enable H.235 security. Access: Offline. AC INI-Param: ENABLEH235SECURITY |
| 1.3.6.1.4.1.5003.9.10.3.1.3.14.2 | Scalarh323AuthUserName | read-write | obsolete | User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| 1.3.6.1.4.1.5003.9.10.3.1.3.14.3 | Scalarh323AuthPassword | read-write | obsolete | Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15 | Nodeh323Misc | |||
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.1 | Scalarh323MiscIsSetupIncludeNum | read-write | obsolete | Setup message contains called party number. Access: Instant. AC INI-Param: ISSETUPINCLUDENUM |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.2 | Scalarh323MiscIsSetupAckUsed | read-write | obsolete | Enable SetupAck messages for overlap mode. Access: Instant. AC INI-Param: ISSETUPACKUSED |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.3 | Scalarh323MiscH245InitTimeOut | read-write | obsolete | h245.channelsTimeout value. Access: Offline. AC INI-Param: H245INITTIMEOUT |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.4 | Scalarh323MiscEnableQ931Cause | read-write | obsolete | H.225 Reason / Q.931 Cause is sent in H.323 Release Complete message. Access: Instant. AC INI-Param: ENABLEQ931CAUSE |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.5 | Scalarh323MiscEnableQ931Multiplexing | read-write | obsolete | Use same socket for all H.225 messages. Access: Instant. AC INI-Param: ENABLEQ931MULTIPLEXING |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.6 | Scalarh323MiscSendChannelNonStandard | read-write | obsolete | Send trunk and bchannel numbers on setup and call proceeding messages as nonStandard data. Access: Instant. AC INI-Param: SENDCHANNELNONSTANDARD |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.7 | Scalarh323MiscH245RoundTripTime | read-write | obsolete | Time between H.245 Round Trip Delay messages (seconds). Access: Instant. AC INI-Param: H245ROUNDTRIPTIME |
| 1.3.6.1.4.1.5003.9.10.3.1.3.15.8 | Scalarh323MiscProgressBehavior | read-write | obsolete | Interworking behavior of Progress message (0-Alert, 1-Progress). Access: Instant. AC INI-Param: H323PROGRESSBEHAVIOR |