AtiEdgeSwitch-MIB
924 objects
Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments.
Imported Objects
| RFC1155-SMI | enterprises |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207 | IdentityalliedTelesis | Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments. | ||
| 1.3.6.1.4.1.207.1 | NodeatiProduct | |||
| 1.3.6.1.4.1.207.1.4 | Nodeswhub | |||
| 1.3.6.1.4.1.207.1.4.148 | Nodeat-9000-28 | |||
| 1.3.6.1.4.1.207.1.4.149 | Nodeat-9000-28SP | |||
| 1.3.6.1.4.1.207.1.4.150 | Nodeat-9000-28POE | |||
| 1.3.6.1.4.1.207.1.4.151 | Nodeat-9000-52 | |||
| 1.3.6.1.4.1.207.1.4.169 | Nodeat-8100S-24 | |||
| 1.3.6.1.4.1.207.1.4.170 | Nodeat-8100S-24C | |||
| 1.3.6.1.4.1.207.1.4.171 | Nodeat-8100S-24POE | |||
| 1.3.6.1.4.1.207.1.4.172 | Nodeat-8100S-48 | |||
| 1.3.6.1.4.1.207.1.4.173 | Nodeat-8100S-48POE | |||
| 1.3.6.1.4.1.207.1.4.174 | Nodeat-8100S-16F8-SC | |||
| 1.3.6.1.4.1.207.1.4.175 | Nodeat-8100S-24F-LC | |||
| 1.3.6.1.4.1.207.1.4.176 | Nodeat-8100S-16F8-LC | |||
| 1.3.6.1.4.1.207.1.4.177 | Nodeat-8100-8 | |||
| 1.3.6.1.4.1.207.1.4.178 | Nodeat-8100-8POE | |||
| 1.3.6.1.4.1.207.1.4.206 | Nodeat-8100S-24F-SC | |||
| 1.3.6.1.4.1.207.1.4.207 | Nodeat-9000-12POE | |||
| 1.3.6.1.4.1.207.1.4.208 | Nodeat-8100S-24DC | |||
| 1.3.6.1.4.1.207.1.4.233 | Nodeat-FS970M-24C | |||
| 1.3.6.1.4.1.207.1.4.234 | Nodeat-FS970M-8 | |||
| 1.3.6.1.4.1.207.1.4.235 | Nodeat-FS970M-8PS | |||
| 1.3.6.1.4.1.207.1.4.236 | Nodeat-FS970M-24PS | |||
| 1.3.6.1.4.1.207.1.4.237 | Nodeat-FS970M-48 | |||
| 1.3.6.1.4.1.207.1.4.238 | Nodeat-FS970M-48PS | |||
| 1.3.6.1.4.1.207.1.4.239 | Nodeat-FS970M-16F8-LC | |||
| 1.3.6.1.4.1.207.1.4.240 | Nodeat-FS970M-24LPS | |||
| 1.3.6.1.4.1.207.1.4.241 | Nodeat-FS970M-24F | |||
| 1.3.6.1.4.1.207.1.4.242 | Nodeat-FS970M-16F8-SC | |||
| 1.3.6.1.4.1.207.1.14 | NoderouterSwitch | |||
| 1.3.6.1.4.1.207.1.14.53 | Nodeat-9924T-EMC | |||
| 1.3.6.1.4.1.207.8 | NodemibObject | |||
| 1.3.6.1.4.1.207.8.17 | NodeatiStkSwMib | |||
| 1.3.6.1.4.1.207.8.17.1 | NodeatiStkSwSysGroup | |||
| 1.3.6.1.4.1.207.8.17.1.1 | NodeatiStkSwSysConfig | |||
| 1.3.6.1.4.1.207.8.17.1.1.1 | ScalaratiStkSwSysReset | read-write | current | Setting this object to 'reset' will cause the switch to perform a soft reboot. Setting this object to 'no-reset' will have no effect. |
| 1.3.6.1.4.1.207.8.17.1.1.2 | ScalaratiStkSwSysIpAddress | read-only | current | The IP address of the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.3 | ScalaratiStkSwSysSubnetMask | read-only | current | The subnet mask of the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.4 | ScalaratiStkSwSysGateway | read-write | current | The IP address of the gateway for the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.5 | ScalaratiStkSwSysIpAddressStatus | read-only | current | This object specifies how the IP address, subnet mask and the gateway address currently in use on the switch was obtained/configured. |
| 1.3.6.1.4.1.207.8.17.1.1.6 | ScalaratiStkSwSysDnsServer | read-only | current | This object specifies the IP address of the DNS server for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches. |
| 1.3.6.1.4.1.207.8.17.1.1.7 | ScalaratiStkSwSysDefaultDomainName | read-only | current | This object specifies the default domain name for the switch. This MIB is not applicable to the 85xx and 94xx family of ATI switches. |
| 1.3.6.1.4.1.207.8.17.1.1.8 | ScalaratiStkSwSysNumberOfModules | read-only | current | This object gives a count of the number of modules present in the stackable switch. |
| 1.3.6.1.4.1.207.8.17.1.1.9 | ScalaratiStkSwSysSpanningTreeStatus | read-write | current | Setting this object to 'enable' will enable spanning tree protocol on the switch. Setting this object to 'disable' will disable spanning tree protocol on the s… |
| 1.3.6.1.4.1.207.8.17.1.1.10 | ScalaratiStkSwSysSpanningTreeVersion | read-write | current | The object can be used to select the version of spanning tree protocol running on the switch. |
| 1.3.6.1.4.1.207.8.17.1.1.11 | ScalaratiStkSwSysAction | read-only | current | This object specifies the following actions that apply to the switch: saveConfig - Save the current switch configuration. reset - Reboot the switch. defaultCon… |
| 1.3.6.1.4.1.207.8.17.1.1.12 | ScalaratiStkSwSysNumOfModuleInStack | read-only | current | This object specifies the number of stacking modules in the stack. |
| 1.3.6.1.4.1.207.8.17.1.2 | NodeatiStkSwSysNwMgmt | |||
| 1.3.6.1.4.1.207.8.17.1.2.1 | ScalaratiStkSwSysTrapRecv1 | read-write | obsolete | This object specifies the IP address of the management station #1 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.2 | ScalaratiStkSwSysTrapRecv2 | read-write | obsolete | This object specifies the IP address of the management station #2 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.3 | ScalaratiStkSwSysTrapRecv3 | read-write | obsolete | This object specifies the IP address of the management station #3 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.2.4 | ScalaratiStkSwSysTrapRecv4 | read-write | obsolete | This object specifies the IP address of the management station #4 to which traps are sent by the switch. This MIB is not applicable to the 85xx and 94xx family… |
| 1.3.6.1.4.1.207.8.17.1.5 | NodeatiStkSwSysSystemTimeConfig | |||
| 1.3.6.1.4.1.207.8.17.1.5.1 | ScalaratiStkSwSysCurrentTime | read-write | current | This object specify the current time of the system. The user can change the time by providing the string format as an input, e.g. HH:MM:SS. |
| 1.3.6.1.4.1.207.8.17.1.5.2 | ScalaratiStkSwSysCurrentDate | read-write | current | This object specify the current time of the system. The user can change the date by providing the string format as an input, e.g. DD-MM-YYYY. |
| 1.3.6.1.4.1.207.8.17.1.5.3 | ScalaratiStkSwSysSNTPStatus | read-write | current | Enable/disable the SNTP status. |
| 1.3.6.1.4.1.207.8.17.1.5.4 | ScalaratiStkSwSysSNTPServerIPAddress | read-write | current | The ipaddress of the SNTP Server. |
| 1.3.6.1.4.1.207.8.17.1.5.5 | ScalaratiStkSwSysSNTPUTCOffset | read-write | current | Set the UTC Offset value within the range from -12 to 12 in hours. |
| 1.3.6.1.4.1.207.8.17.1.5.6 | ScalaratiStkSwSysSNTPDSTStatus | read-write | current | Enable/disble the Daylight Saving Time. |
| 1.3.6.1.4.1.207.8.17.1.5.7 | ScalaratiStkSwSysSNTPPollingInterval | read-only | current | Setting the interval for polling the SNTP Server. The polling time range is between 60 and 1200 in seconds. |
| 1.3.6.1.4.1.207.8.17.1.5.8 | ScalaratiStkSwSysSNTPLastDelta | read-only | current | Display the last adjustment to system done in seconds. |
| 1.3.6.1.4.1.207.8.17.1.6 | NodeatiStkSwSysInfoGroup | |||
| 1.3.6.1.4.1.207.8.17.1.6.1 | TableatiStkSwTemperatureInfoTable | not-accessible | current | This table contains a list of system temperature information present in the switch stack including voltage and temperature. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1 | RowatiStkSwTemperatureInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwTemperatureInfoTable' that describes the hardware informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1.1 | ColumnatiStkSwTemperatureInfoModuleId | read-only | current | The module Id of a switch, it also used as an index of the table. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1.2 | ColumnatiStkSwTemperatureInfoTemperature | read-only | current | The temperature of the device in Celcius. |
| 1.3.6.1.4.1.207.8.17.1.6.1.1.3 | ColumnatiStkSwTemperatureInfoState | read-only | current | The state of the temperature state, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.2 | TableatiStkSwFanInfoTable | not-accessible | current | This table contains information for all the fans present in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1 | RowatiStkSwFanInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwFanInfoTable' that describes the informaton for a specific fan in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.1 | ColumnatiStkSwFanInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.2 | ColumnatiStkSwFanInfoFan1Id | read-only | current | The fan Id1 of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.3 | ColumnatiStkSwFan1InfoState | read-only | current | The state of the fan1 running, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.4 | ColumnatiStkSwFan1InfoSpeed | read-only | current | The current speed of fan1. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.5 | ColumnatiStkSwFanInfoFan2Id | read-only | current | The fan2 Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.6 | ColumnatiStkSwFan2InfoState | read-only | current | The state of the fan2 running, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.2.1.7 | ColumnatiStkSwFan2InfoSpeed | read-only | current | The current speed of fan2. |
| 1.3.6.1.4.1.207.8.17.1.6.4 | TableatiStkSwPSUInfoTable | not-accessible | current | This table contains information for all the power supply units present in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1 | RowatiStkSwPSUInfoEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPSUInfoTable' that describes the informaton for a specific PSU in the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.1 | ColumnatiStkSwPSUInfoModuleId | read-only | current | The module Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.2 | ColumnatiStkSwPSUInfoPSU1Id | read-only | current | The PSU1 Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.3 | ColumnatiStkSwPSU1InfoState | read-only | current | The state of the PSU1, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.4 | ColumnatiStkSwPSU1InfoStatus | read-only | current | The status of the PSU1, either on or off. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.5 | ColumnatiStkSwPSUInfoPSU2Id | read-only | current | The PSU2 Id of the switch. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.6 | ColumnatiStkSwPSU2InfoState | read-only | current | The state of the PSU2, either normal or off. |
| 1.3.6.1.4.1.207.8.17.1.6.4.1.7 | ColumnatiStkSwPSU2InfoStatus | read-only | current | The status of the PSU2, either on or off. |
| 1.3.6.1.4.1.207.8.17.1.7 | NodeatiStkSwSysMgmtACLGroup | |||
| 1.3.6.1.4.1.207.8.17.1.7.1 | ScalaratiStkSwSysMgmtACLStatus | read-write | current | Enable/Disable management ACL feature. |
| 1.3.6.1.4.1.207.8.17.1.7.2 | TableatiStkSwSysMgmtACLConfigTable | not-accessible | current | This table contains a list of MgmtACLs present in the switch stack and their associated hardware information. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1 | RowatiStkSwSysMgmtACLConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwSysMgmtACLConfigTable' that allow the user controls which management stations can remotely manage the device using t… |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.1 | ColumnatiStkSwSysMgmtACLConfigModuleId | read-only | current | The ID of this module. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.2 | ColumnatiStkSwSysMgmtACLConfigId | read-only | current | The ID of the Management ACL Table for this module. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.3 | ColumnatiStkSwSysMgmtACLConfigIpAddr | read-write | current | The IP Address of the specific management station. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.4 | ColumnatiStkSwSysMgmtACLConfigMask | read-write | current | The subnet mask of the IP Address. |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.5 | ColumnatiStkSwSysMgmtACLConfigApplication | read-write | current | This object specify which interface the user want the management station to be able to use when managing the switch. The options are : telnet, web, ping, all. … |
| 1.3.6.1.4.1.207.8.17.1.7.2.1.6 | ColumnatiStkSwSysMgmtACLConfigRowStatus | read-write | current | The Row Status of the Mgmt ACL table. |
| 1.3.6.1.4.1.207.8.17.2 | NodeatiStkSwPortGroup | |||
| 1.3.6.1.4.1.207.8.17.2.1 | TableatiStkSwPortConfigTable | not-accessible | current | This table contains a list of physical ports present in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.2.1.1 | RowatiStkSwPortConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortConfigTable' that describes the attributes associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.1.1.1 | ColumnatiStkSwModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.2.1.1.2 | ColumnatiStkSwPortId | read-only | current | This object specifies the ID of a port present on a given module. |
| 1.3.6.1.4.1.207.8.17.2.1.1.3 | ColumnatiStkSwPortName | read-write | current | The user-defined ASCII name of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.4 | ColumnatiStkSwPortState | read-write | current | This object allows the user to either enabled or disabled. This object can be read to obtain the current state of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.5 | ColumnatiStkSwPortLinkState | read-only | current | This object specifies the link state on this port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.6 | ColumnatiStkSwPortNegotiation | read-write | current | This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations. |
| 1.3.6.1.4.1.207.8.17.2.1.1.7 | ColumnatiStkSwPortSpeed | read-only | current | This object specifies the current speed of the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.8 | ColumnatiStkSwPortDuplexStatus | read-only | current | This object specifies the current duplex type used by the port. |
| 1.3.6.1.4.1.207.8.17.2.1.1.9 | ColumnatiStkSwPortFlowControl | read-write | current | This object is used to enable/disable flow control on the port. When enabled, flow control will be full duplex. Flow control is disabled by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.10 | ColumnatiStkSwPortBackPressure | read-write | current | This object is used to enable/disable Back Pressure on the port. Back Pressure is disabled by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.11 | ColumnatiStkSwPortPriority | read-write | current | This object specifies whether packets flowing through this port use the associated VLAN priority or override the associated VLAN priority with either a high or… |
| 1.3.6.1.4.1.207.8.17.2.1.1.12 | ColumnatiStkSwPortBroadcastProcessing | read-only | current | This object specifies whether the received broadcast packets should be processed or discarded. Broadcast packets are processed by default. |
| 1.3.6.1.4.1.207.8.17.2.1.1.13 | ColumnatiStkSwPortMDIO | read-write | current | This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. |
| 1.3.6.1.4.1.207.8.17.2.1.1.14 | ColumnatiStkSwPortHOLLimit | read-write | current | This object allows user to set the head of line blocking limit. Note (94xx): Range upto 8191 is supported for Gigabit Ports. |
| 1.3.6.1.4.1.207.8.17.2.1.1.15 | ColumnatiStkSwPortBackPressureLimit | read-write | current | This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix… |
| 1.3.6.1.4.1.207.8.17.2.1.1.16 | ColumnatiStkSwPortSTPState | read-only | current | This object specifies the spanning tree state on this port. This object is not applicable to 8300 series products. This object is not valid on the 9400 series … |
| 1.3.6.1.4.1.207.8.17.2.2 | NodeatiStkSwPortMirroringConfig | |||
| 1.3.6.1.4.1.207.8.17.2.2.1 | ScalaratiStkSwPortMirroringState | read-write | current | This object specifies whether port mirroring is l2-enabled, or disabled on the switch. Note that, when enabled, both transmit and receive packets will be mirro… |
| 1.3.6.1.4.1.207.8.17.2.2.4 | ScalaratiStkSwPortMirroringDestinationModuleId | read-write | current | This object specifies the module ID of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortM… |
| 1.3.6.1.4.1.207.8.17.2.2.5 | ScalaratiStkSwPortMirroringDestinationPortId | read-write | current | This object specifies the port ID (on the module specified by 'atiStkSwPortMirroringDestinationModuleId') of the destination port that mirrors the source port … |
| 1.3.6.1.4.1.207.8.17.2.2.6 | ScalaratiStkSwPortMirroringSourceRxList | read-write | current | This object specifies a list of ports that are mirrored for ingress traffic. All packets received on these ports will be mirrored onto the mirror port (atiStkS… |
| 1.3.6.1.4.1.207.8.17.2.2.7 | ScalaratiStkSwPortMirroringSourceTxList | read-write | current | This object specifies a list of ports that are mirrored for egress traffic. All packets transmitted from these ports will be mirrored onto the mirror port (ati… |
| 1.3.6.1.4.1.207.8.17.2.5 | TableatiStkPortSecurityConfigTable | not-accessible | current | This table contains the port security attributes of a list of physical ports present in the switch. This table object is not applicable to 8300 series products. |
| 1.3.6.1.4.1.207.8.17.2.5.1 | RowatiStkPortSecurityConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkPortSecurityConfigTable' that describes the port security attributes associated with a physical port present in the sw… |
| 1.3.6.1.4.1.207.8.17.2.5.1.2 | ColumnatiStkPortSecurityThreshold | read-write | current | This object specifies the security threshold on this port. It is applicable only if the port security mode (specified by 'portSecurityMode') is set to 'limited… |
| 1.3.6.1.4.1.207.8.17.2.5.1.3 | ColumnatiStkPortIntrusionAction | read-write | current | This object specifies the security action that should be taken when an intrusion is detected. By default, port intrusion action is set to 'discard' mode. |
| 1.3.6.1.4.1.207.8.17.2.5.1.4 | ColumnatiStkPortSecurityAging | read-write | current | This object enables or disables the security aging by the 'portSecurityAging'. By default, port intrusion action is disabled. |
| 1.3.6.1.4.1.207.8.17.2.5.1.5 | ColumnatiStkPortIntrusionActionStatus | read-write | current | This object enables or disables the security action specified by the 'portIntrusionAction'. By default, port intrusion action is disabled. |
| 1.3.6.1.4.1.207.8.17.2.6 | TableatiStkPortDhcpIpConfigTable | not-accessible | current | This table contains the port DHCP IP assignments list of physical ports present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.6.1 | RowatiStkPortDhcpIpConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkPortDhcpIpConfigTable' that describes the port DHCP IP assignments associated with a physical port present in the swit… |
| 1.3.6.1.4.1.207.8.17.2.6.1.1 | ColumnatiStkPortDhcpIpOffer | read-only | current | This object specifies the DHCP IP Offer on this port. |
| 1.3.6.1.4.1.207.8.17.2.6.1.2 | ColumnatiStkPortDhcpIpAdd | read-write | current | This object specifies the DHCP IP added on this port. |
| 1.3.6.1.4.1.207.8.17.2.6.1.3 | ColumnatiStkPortDhcpIpDelete | read-write | current | This object specifies the DHCP IP deleted on this port. |
| 1.3.6.1.4.1.207.8.17.2.7 | TableatiStkSwIntrusionAttackTable | not-accessible | current | This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.7.1 | RowatiStkSwIntrusionAttackEntry | not-accessible | current | This object specifies an entry in 'atiStkSwIntrusionAttackTable' that describes the intruder attack associated with a physical port present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.7.1.1 | ColumnatiStkSwIntruderAttackVlanId | read-only | current | This object identifies the intruding VlanId on the port for this module. |
| 1.3.6.1.4.1.207.8.17.2.7.1.2 | ColumnatiStkSwIntruderAttackMacAddr | read-only | current | This object identifies the intruding MAC address on the port for this module. |
| 1.3.6.1.4.1.207.8.17.2.8 | TableatiStkSwPortLoopProtectConfigTable | not-accessible | current | This table contains the current loop detection information of a list of physical ports present in the switch. |
| 1.3.6.1.4.1.207.8.17.2.8.1 | RowatiStkSwPortLoopProtectConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPortLoopProtectConfigTable' that describe the current Loop Detection information with a physical port present in the… |
| 1.3.6.1.4.1.207.8.17.2.8.1.1 | ColumnatiStkSwPortLoopProtectConfigStatus | read-only | current | This object specifies the current loop status of Loop Protection. |
| 1.3.6.1.4.1.207.8.17.2.8.1.2 | ColumnatiStkSwPortLoopProtectConfigAction | read-only | current | This object specifies the current loop action by Loop Detected. |
| 1.3.6.1.4.1.207.8.17.2.8.1.3 | ColumnatiStkSwPortLoopProtectConfigExpiry | read-only | current | This object specifies the remaining time(sec) to back to normal status from blocking status. A value of -1 indicates that Blocktimeout has been set 'None' or L… |
| 1.3.6.1.4.1.207.8.17.2.8.1.4 | ColumnatiStkSwRxLDFModuleId | read-only | current | The Module ID where the loop detection frame is received on. |
| 1.3.6.1.4.1.207.8.17.2.8.1.5 | ColumnatiStkSwRxLDFPortId | read-only | current | The Port ID where the loop detection frame is received on. |
| 1.3.6.1.4.1.207.8.17.2.8.1.6 | ColumnatiStkSwRxLDFVlanId | read-only | current | The Vlan ID where the loop detection frame is received on. |
| 1.3.6.1.4.1.207.8.17.3 | NodeatiStkSwVlanGroup | |||
| 1.3.6.1.4.1.207.8.17.3.1 | TableatiStkSwVlanConfigTable | not-accessible | current | This table contains a list of VLANs configured on the switch. |
| 1.3.6.1.4.1.207.8.17.3.1.1 | RowatiStkSwVlanConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwVlanConfigTable' that describes a VLAN configured on the switch. |
| 1.3.6.1.4.1.207.8.17.3.1.1.1 | ColumnatiStkSwVlanId | read-only | current | The VLAN ID of this VLAN as stored in the tag information header in accordance with the 802.1q specifications. |
| 1.3.6.1.4.1.207.8.17.3.1.1.2 | ColumnatiStkSwVlanName | read-write | current | The name of the VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.3 | ColumnipAddress | read-write | current | The ip address of the VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.4 | ColumnatiStkSwVlanVlanType | read-only | current | This object specifies the type of the Vlan. |
| 1.3.6.1.4.1.207.8.17.3.1.1.5 | ColumnatiStkSwVlanTaggedPortList | read-write | current | This object specifies a list of tagged ports (on module #1) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.6 | ColumnatiStkSwVlanUntaggedPortList | read-write | current | This object specifies a list of untagged ports (on module #1) that participate in this VLAN. |
| 1.3.6.1.4.1.207.8.17.3.1.1.7 | ColumnatiStkSwVlanConfigEntryStatus | read-write | current | The current status of this VLAN entry. |
| 1.3.6.1.4.1.207.8.17.3.2 | TableatiStkSwPort2VlanTable | not-accessible | current | This tables contains a list of ports in the switch and their associated VLAN configuration information. |
| 1.3.6.1.4.1.207.8.17.3.2.1 | RowatiStkSwPort2VlanEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPort2VlanTable' that describes the VLAN information associated with a given module/port. |
| 1.3.6.1.4.1.207.8.17.3.2.1.1 | ColumnatiStkSwPortIndex | read-only | current | The Index of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.2.1.2 | ColumnatiStkSwPortPortId | read-only | current | The ID of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.2.1.3 | ColumnatiStkSwPortVlanId | read-only | current | The ID of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.2.1.4 | ColumnatiStkSwPortVlanName | read-only | current | The name of the VLAN to which this port belongs. |
| 1.3.6.1.4.1.207.8.17.3.3 | TableatiStkSwMacAddr2VlanTable | not-accessible | current | This table contains a list of MAC addresses (in the forwarding table of the switch) and the associated VLAN to which each MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1 | RowatiStkSwMacAddr2VlanEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMacAddr2VlanTable' that associates a MAC address (in the forwarding table of the switch) with the VLAN to which the … |
| 1.3.6.1.4.1.207.8.17.3.3.1.1 | ColumnatiStkSwMacEntry | read-only | current | All entries present in the table. |
| 1.3.6.1.4.1.207.8.17.3.3.1.2 | ColumnatiStkSwMacAddress | read-only | current | A MAC address from the forwarding table of the switch. |
| 1.3.6.1.4.1.207.8.17.3.3.1.3 | ColumnatiStkSwMacAddrVlanId | read-only | current | The ID of the VLAN to which this MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1.4 | ColumnatiStkSwMacAddrVlanName | read-only | current | The name of the VLAN to which this MAC address belongs. |
| 1.3.6.1.4.1.207.8.17.3.3.1.7 | ColumnatiStkSwMacAddrPortList | read-only | current | The port List (on the module specified by 'atiStkSwMacAddrModuleId') on which this MAC address entry exists. This is shown as U: Untagged Ports T: Tagged Ports. |
| 1.3.6.1.4.1.207.8.17.3.6 | NodeatiStkSwGVRPConfig | |||
| 1.3.6.1.4.1.207.8.17.3.6.1 | ScalaratiStkSwGVRPStatus | read-write | current | Enabled/Disabled GVRP on a switch basis. |
| 1.3.6.1.4.1.207.8.17.3.6.2 | ScalaratiStkSwGVRPGIPStatus | read-write | current | Enabled/Disabled GARP Information Propagation (GIP) on a switch basis. |
| 1.3.6.1.4.1.207.8.17.3.6.3 | ScalaratiStkSwGVRPJoinTimer | read-write | current | Specifies the Join Timer in centi seconds, (1/100th of seconds), The default is 20 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.6.4 | ScalaratiStkSwGVRPLeaveTimer | read-write | current | Specifies the Leave Timer in centi seconds, (1/100th of seconds), The default is 60 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.6.5 | ScalaratiStkSwGVRPLeaveAllTimer | read-write | current | Specifies the Leave All Timer in centi seconds, (1/100th of seconds), The default is 1000 centi seconds. |
| 1.3.6.1.4.1.207.8.17.3.7 | TableatiStkSwGVRPPortConfigTable | not-accessible | current | This table is configuring the GVRP Vlan base on each port. |
| 1.3.6.1.4.1.207.8.17.3.7.1 | RowatiStkSwGVRPPortConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwGVRPPortConfigTable'. |
| 1.3.6.1.4.1.207.8.17.3.7.1.1 | ColumnatiStkSwGVRPPortConfigModuleId | read-only | current | An ID that indicate which module it refer to for stacking. |
| 1.3.6.1.4.1.207.8.17.3.7.1.2 | ColumnatiStkSwGVRPPortConfigPortId | read-only | current | Port Index. |
| 1.3.6.1.4.1.207.8.17.3.7.1.3 | ColumnatiStkSwGVRPPortConfigStatus | read-write | current | Port Status for GVRP Vlan either Normal or Mode can be set. |
| 1.3.6.1.4.1.207.8.17.3.8 | TableatiStkSwGVRPCountersTable | not-accessible | current | This table is configuring the GVRP Vlan base on each port. |
| 1.3.6.1.4.1.207.8.17.3.8.1 | RowatiStkSwGVRPCountersEntry | not-accessible | current | This object specifies an entry in 'atiStkSwGVRPCountersTable'. |
| 1.3.6.1.4.1.207.8.17.3.8.1.1 | ColumnatiStkSwGVRPCountersModuleId | read-only | current | An ID that indicate which module it refer to for stacking. |
| 1.3.6.1.4.1.207.8.17.3.8.1.2 | ColumnatiStkSwGVRPCountersGARPRxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.3 | ColumnatiStkSwGVRPCountersInvalidGARPRxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.4 | ColumnatiStkSwGVRPCountersGARPTxPkt | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.5 | ColumnatiStkSwGVRPCountersGARPTxDisabled | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.6 | ColumnatiStkSwGVRPCountersPortNotSending | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.7 | ColumnatiStkSwGVRPCountersGARPDisabled | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.8 | ColumnatiStkSwGVRPCountersPortNotListening | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.9 | ColumnatiStkSwGVRPCountersInvalidPort | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.10 | ColumnatiStkSwGVRPCountersInvalidProtocol | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.11 | ColumnatiStkSwGVRPCountersInvalidFormat | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.12 | ColumnatiStkSwGVRPCountersDatabaseFull | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.13 | ColumnatiStkSwGVRPCountersRxMsgLeaveAll | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.14 | ColumnatiStkSwGVRPCountersRxMsgJoinEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.15 | ColumnatiStkSwGVRPCountersRxMsgJoinIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.16 | ColumnatiStkSwGVRPCountersRxMsgLeaveEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.17 | ColumnatiStkSwGVRPCountersRxMsgLeaveIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.18 | ColumnatiStkSwGVRPCountersRxMsgEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.19 | ColumnatiStkSwGVRPCountersRxMsgBadMsg | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.20 | ColumnatiStkSwGVRPCountersRxMsgBadAttribute | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.21 | ColumnatiStkSwGVRPCountersTxMsgLeaveAll | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.22 | ColumnatiStkSwGVRPCountersTxMsgJoinEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.23 | ColumnatiStkSwGVRPCountersTxMsgJoinIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.24 | ColumnatiStkSwGVRPCountersTxMsgLeaveEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.25 | ColumnatiStkSwGVRPCountersTxMsgLeaveIn | read-only | current | |
| 1.3.6.1.4.1.207.8.17.3.8.1.26 | ColumnatiStkSwGVRPCountersTxMsgEmpty | read-only | current | |
| 1.3.6.1.4.1.207.8.17.4 | NodeatiStkSwMacAddrGroup | |||
| 1.3.6.1.4.1.207.8.17.4.1 | TableatiStkSwStaticMacAddrTable | not-accessible | current | This table contains a list of static MAC address configured on the switch. |
| 1.3.6.1.4.1.207.8.17.4.1.1 | RowatiStkSwStaticMacAddrEntry | not-accessible | current | This object is an entry in 'atiStkSwStaticMacAddrTable' that describes a static MAC address configured on a given module and port. |
| 1.3.6.1.4.1.207.8.17.4.1.1.1 | ColumnatiStkSwStaticEntry | read-only | current | The Table Entry number in static MAC address entry table. |
| 1.3.6.1.4.1.207.8.17.4.1.1.2 | ColumnatiStkSwStaticMacAddress | read-only | current | This object identifies the static MAC address of this entry. |
| 1.3.6.1.4.1.207.8.17.4.1.1.3 | ColumnatiStkSwStaticMacAddrVlanId | read-only | current | The ID of the VLAN on which this static MAC address entry is configured. |
| 1.3.6.1.4.1.207.8.17.4.1.1.4 | ColumnatiStkSwStaticMacAddrModuleId | read-only | current | The module ID on which this static MAC address entry is configured. |
| 1.3.6.1.4.1.207.8.17.4.1.1.5 | ColumnatiStkSwStaticMacAddrPortId | read-only | current | The port ID (on the module specified by 'atiStkSwStaticMacAddrModuleId') on which this static MAC address entry is configured. Note: a) When defining a list th… |
| 1.3.6.1.4.1.207.8.17.4.1.1.6 | ColumnatiStkSwStaticMacAddrDstMacState | read-only | current | The current status of this static MAC address entry. |
| 1.3.6.1.4.1.207.8.17.4.1.1.7 | ColumnatiStkSwStaticMacAddrEntryStatus | read-only | current | The current status of this static MAC address entry. |
| 1.3.6.1.4.1.207.8.17.5 | NodeatiStkSwEthStatsGroup | |||
| 1.3.6.1.4.1.207.8.17.5.1 | TableatiStkSwEthModuleMonTable | not-accessible | current | This table contains a list of modules and their associated ethernet statistics (measured on the module as a whole). |
| 1.3.6.1.4.1.207.8.17.5.1.1 | RowatiStkSwEthModuleMonEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthModuleMonTable' that describes the ethernet statistics measured on a given module as a whole. |
| 1.3.6.1.4.1.207.8.17.5.1.1.1 | ColumnatiStkSwEthModuleMonId | read-only | current | Index into atiStkSwEthModuleMonTable. |
| 1.3.6.1.4.1.207.8.17.5.1.1.2 | ColumnatiStkSwEthModuleMonTxGoodFrames | read-only | current | The total number of good frames transmitted by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.3 | ColumnatiStkSwEthModuleMonRxGoodFrames | read-only | current | The total number of good frames received by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.4 | ColumnatiStkSwEthModuleMonTxTotalBytes | read-only | current | The total number of bytes transmitted by this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.5 | ColumnatiStkSwEthModuleMonTxBroadcastFrames | read-only | current | The total number of broadcast frames transmitted from this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.6 | ColumnatiStkSwEthModuleMonTxMulticastFrames | read-only | current | The total number of multicast frames transmitted from this module. |
| 1.3.6.1.4.1.207.8.17.5.1.1.7 | ColumnatiStkSwEthModuleMonRxOverrunFrames | read-only | current | The total number of oversized frames received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2 | TableatiStkSwEthModuleErrTable | not-accessible | current | This table contains a list of modules and their associated ethernet error statistics (measured on the module as a whole). |
| 1.3.6.1.4.1.207.8.17.5.2.1 | RowatiStkSwEthModuleErrEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthModuleErrTable' that describes the ethernet error statistics measured on a given module as a whole. |
| 1.3.6.1.4.1.207.8.17.5.2.1.1 | ColumnatiStkSwEthModuleErrId | read-only | current | Index into atiStkSwEthModuleErrTable. |
| 1.3.6.1.4.1.207.8.17.5.2.1.2 | ColumnatiStkSwEthModuleErrRxCRC | read-only | current | The total number of CRC errors on packets received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2.1.3 | ColumnatiStkSwEthModuleErrRxBadFrames | read-only | current | The total number of bad frames received on this module. |
| 1.3.6.1.4.1.207.8.17.5.2.1.4 | ColumnatiStkSwEthModuleErrCollisions | read-only | current | The number of times a collision was detected on this module. |
| 1.3.6.1.4.1.207.8.17.5.3 | TableatiStkSwEthPortMonTable | not-accessible | current | This table contains a list of ports and their associated ethernet statistics. |
| 1.3.6.1.4.1.207.8.17.5.3.1 | RowatiStkSwEthPortMonEntry | not-accessible | current | This object specifies an entry in 'atiStkSwEthPortMonTable' that describes the ethernet statistics measured on a given module/port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.1 | ColumnatiStkSwEthPortMonId | read-only | current | Index into atiStkSwEthPortMonTable. |
| 1.3.6.1.4.1.207.8.17.5.3.1.2 | ColumnatiStkSwEthPortMonTxGoodFrames | read-only | current | The total number of good frames transmitted by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.3 | ColumnatiStkSwEthPortMonRxGoodFrames | read-only | current | The total number of good frames received by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.4 | ColumnatiStkSwEthPortMonTxTotalBytes | read-only | current | The total number of bytes transmitted by this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.5 | ColumnatiStkSwEthPortMonTxBroadcastFrames | read-only | current | The total number of broadcast frames transmitted from this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.6 | ColumnatiStkSwEthPortMonTxMulticastFrames | read-only | current | The total number of broadcast frames transmitted from this port. |
| 1.3.6.1.4.1.207.8.17.5.3.1.7 | ColumnatiStkSwEthPortMonRxOverrunFrames | read-only | current | The total number of oversized frames received on this port. |
| 1.3.6.1.4.1.207.8.17.5.4 | TableatiStkSwEthPortErrTable | not-accessible | current | This table contains a list of ports and their associated ethernet error statistics. |
| 1.3.6.1.4.1.207.8.17.5.4.1 | RowatiStkSwEthPortErrEntry | not-accessible | current | This object specifies an entry in atiStkSwEthPortErrTable that describes the ethernet error statistics measured on a given module/port. |
| 1.3.6.1.4.1.207.8.17.5.4.1.1 | ColumnatiStkSwEthPortErrId | read-only | current | Index into atiStkSwEthPortMonTable. |
| 1.3.6.1.4.1.207.8.17.5.4.1.2 | ColumnatiStkSwEthPortErrRxBadFrames | read-only | current | The total number of bad frames received on this port. |
| 1.3.6.1.4.1.207.8.17.5.4.1.3 | ColumnatiStkSwEthPortErrCollisions | read-only | current | The number of times a collision was detected on this port. |
| 1.3.6.1.4.1.207.8.17.6 | NodeatiStkSwTrapsGroup | |||
| 1.3.6.1.4.1.207.8.17.6.0 | NodeatiStkSwTrapsInfo | |||
| 1.3.6.1.4.1.207.8.17.6.0.1 | NotificationatiStkSwIntrusionDetectionTrap | current | This trap is sent out when an intrusion is detected on a port in the switch and the port security has been configured to send traps. It includes the mac addres… | |
| 1.3.6.1.4.1.207.8.17.6.0.2 | NotificationatiStkSwSTPPortStateChangeTrap | current | This trap is sent out when STP port state changes due to RSTP/MSTP topology changes in the switch. This trap is not applicable to 8300 series products. | |
| 1.3.6.1.4.1.207.8.17.6.0.3 | NotificationatiStkSwBPDUGuardIsTriggeredTrap | current | This trap is sent out when a BPDU guard detects a spoofed BPDU entering the STP system thru the edge port. The BPDU guard will disable the port and notify the … | |
| 1.3.6.1.4.1.207.8.17.6.0.4 | NotificationatiStkSwPOEPowerExceedThresholdTrap | current | This trap is sent out when there is a port power exceeding the threshold. | |
| 1.3.6.1.4.1.207.8.17.6.0.5 | NotificationatiStkSwPOEPowerNormalTrap | current | This trap is sent out when there is a port power under threshold. | |
| 1.3.6.1.4.1.207.8.17.6.0.6 | NotificationatiStkSwFanStopSpinTrap | current | This trap is sent out when an error in the fan operation is detected in a module. | |
| 1.3.6.1.4.1.207.8.17.6.0.7 | NotificationatiStkSwFanStopSpinRecoveryTrap | current | This trap is sent out when a fan become running Ok. | |
| 1.3.6.1.4.1.207.8.17.6.0.8 | NotificationatiStkSwTemperatureHighTrap | obsolete | This trap is sent out when the temperature of a module becomes too high. | |
| 1.3.6.1.4.1.207.8.17.6.0.9 | NotificationatiStkSwTemperatureLowTrap | obsolete | This trap is sent out when the temperature of a module becomes too low. | |
| 1.3.6.1.4.1.207.8.17.6.0.10 | NotificationatiStkSwTemperatureLimitClearTrap | current | This trap is sent out when it is generated when system temperature become normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.11 | NotificationatiStkSwVolt5VLimitTrap | current | This trap is sent out when there is a port 5v power exceeds limit. | |
| 1.3.6.1.4.1.207.8.17.6.0.12 | NotificationatiStkSwVolt5VLimitClearTrap | current | This trap is sent out when there is a port 5v power returns normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.13 | NotificationatiStkSwVoltVCCLimitTrap | current | This trap is sent out when there is a port VCC power exceeds limit. | |
| 1.3.6.1.4.1.207.8.17.6.0.14 | NotificationatiStkSwVoltVCCLimitClearTrap | current | This trap is sent out when there is a port VCC power returns normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.15 | NotificationatiStkSwVoltVCCPLimitTrap | current | This trap is sent out when there is a port VCCP power exceeds limit. | |
| 1.3.6.1.4.1.207.8.17.6.0.16 | NotificationatiStkSwVoltVCCPLimitClearTrap | current | This trap is sent out when there is a port VCCP power returns normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.17 | NotificationatiStkSwVolt2HalfVLimitTrap | current | This trap is sent out when there is a port 2.5v power exceeds limit. | |
| 1.3.6.1.4.1.207.8.17.6.0.18 | NotificationatiStkSwVolt2HalfVLimitClearTrap | current | This trap is sent out when there is a port 2.5v power returns normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.19 | NotificationatiStkSwVolt12VLimitTrap | current | This trap is sent out when there is a port 12v power exceeds limit. | |
| 1.3.6.1.4.1.207.8.17.6.0.20 | NotificationatiStkSwVolt12VLimitClearTrap | current | This trap is sent out when there is a port 12v power returns normal. | |
| 1.3.6.1.4.1.207.8.17.6.0.21 | NotificationatiStkSwPOEErrorStateTrap | current | This trap is sent out when there is a POE port abnormal. | |
| 1.3.6.1.4.1.207.8.17.6.0.22 | NotificationatiStkSwPOEPortResetTrap | current | This trap is sent out when there is a POE port reset. | |
| 1.3.6.1.4.1.207.8.17.6.0.23 | NotificationatiStkSwSysRPSStateChangedTrap | current | This trap is sent out when the RPS(redundant Power Supply) changes state in the switch. This trap is not applicable to 8300 series products. | |
| 1.3.6.1.4.1.207.8.17.6.0.24 | NotificationatiStkSwBPDUGuardFilterTriggeredTrap | current | This trap is sent out when a BPDU filter detects a spoofed BPDU entering the STP system thru the edge port. The BPDU filter will block the port and notify the … | |
| 1.3.6.1.4.1.207.8.17.6.0.25 | NotificationatiStkSwLoopProtectDetectedLoopBlockedTrap | current | Generated when Loop Protection feature blocks a interface with a loop. | |
| 1.3.6.1.4.1.207.8.17.6.0.26 | NotificationatiStkSwLoopProtectRecoverLoopBlockedTrap | current | Generated when Loop Protection feature restores a blocked interface back to normal operation. | |
| 1.3.6.1.4.1.207.8.17.6.0.27 | NotificationatiStkSwLoopProtectDetectedByLDFTrap | current | Generated when Loop Protection feature detects a loop by Loop Detection method. | |
| 1.3.6.1.4.1.207.8.17.7 | NodeatiStkSwQoSGroup | |||
| 1.3.6.1.4.1.207.8.17.7.1 | TableatiStkSwQosStatusTable | not-accessible | current | atiStkSwQosStatusTable |
| 1.3.6.1.4.1.207.8.17.7.1.1 | RowatiStkSwQosStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.7.1.1.1 | ColumnatiStkSwQosStatusPortId | read-only | current | Index into atiStkSwQosStatusTable |
| 1.3.6.1.4.1.207.8.17.7.1.1.2 | ColumnatiStkSwQosStatusStatus | read-write | current | |
| 1.3.6.1.4.1.207.8.17.7.2 | TableatiStkSwQosInterfaceDetailsTable | not-accessible | current | atiStkSwQosInterfaceDetailsTable |
| 1.3.6.1.4.1.207.8.17.7.2.1 | RowatiStkSwQosInterfaceDetailsEntry | not-accessible | current | atiStkSwQosInterfaceDetailsEntry |
| 1.3.6.1.4.1.207.8.17.7.2.1.1 | ColumnatiStkSwQosInterfaceDetailsPortId | read-only | current | Index into atiStkSwQosInterfaceDetailsPortId |
| 1.3.6.1.4.1.207.8.17.7.2.1.2 | ColumnatiStkSwQosInterfaceDetailsDefaultQueue | read-write | current | atiStkSwQosInterfaceDetailsDefaultQueue |
| 1.3.6.1.4.1.207.8.17.7.2.1.3 | ColumnatiStkSwQosInterfaceDetailsTrust | read-write | current | atiStkSwQosInterfaceDetailsDefaultQueue |
| 1.3.6.1.4.1.207.8.17.7.2.1.4 | ColumnatiStkSwQosInterfaceDetailsSetCOS | read-write | current | atiStkSwQosInterfaceDetailsMarkOrRemark |
| 1.3.6.1.4.1.207.8.17.7.2.1.5 | ColumnatiStkSwQosInterfaceDetailsSetDSCP | read-write | current | atiStkSwQosInterfaceDetailsMarkOrRemark |
| 1.3.6.1.4.1.207.8.17.7.2.1.6 | ColumnatiStkSwQosInterfaceDetailsSchedularAndQueueWeightList | read-write | current | atiStkSwQosInterfaceDetailsSchedularAndQueueWeightList |
| 1.3.6.1.4.1.207.8.17.7.3 | TableatiStkSwQosCosQueueMapTable | not-accessible | current | atiStkSwQosCosQueueMapTable |
| 1.3.6.1.4.1.207.8.17.7.3.1 | RowatiStkSwQosCosQueueMapEntry | not-accessible | current | atiStkSwQosCosQueueMapEntry |
| 1.3.6.1.4.1.207.8.17.7.3.1.1 | ColumnatiStkSwQosCosQueueMapPortId | read-only | current | Index into atiStkSwQosCosQueueMapTable |
| 1.3.6.1.4.1.207.8.17.7.3.1.2 | ColumnatiStkSwQosCosQueueMapCos0Queue | read-write | current | atiStkSwQosCosQueueMapCos0Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.3 | ColumnatiStkSwQosCosQueueMapCos1Queue | read-write | current | atiStkSwQosCosQueueMapCos1Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.4 | ColumnatiStkSwQosCosQueueMapCos2Queue | read-write | current | atiStkSwQosCosQueueMapCos2Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.5 | ColumnatiStkSwQosCosQueueMapCos3Queue | read-write | current | atiStkSwQosCosQueueMapCos3Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.6 | ColumnatiStkSwQosCosQueueMapCos4Queue | read-write | current | atiStkSwQosCosQueueMapCos4Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.7 | ColumnatiStkSwQosCosQueueMapCos5Queue | read-write | current | atiStkSwQosCosQueueMapCos5Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.8 | ColumnatiStkSwQosCosQueueMapCos6Queue | read-write | current | atiStkSwQosCosQueueMapCos6Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.9 | ColumnatiStkSwQosCosQueueMapCos7Queue | read-write | current | atiStkSwQosCosQueueMapCos7Queue |
| 1.3.6.1.4.1.207.8.17.7.3.1.10 | ColumnatiStkSwQosCosQueueMapDefaultMap | read-write | current | atiStkSwQosCosQueueMapDefaultQueue |
| 1.3.6.1.4.1.207.8.17.7.4 | TableatiStkSwQosDscpQueueMapTable | not-accessible | current | atiStkSwQosDscpQueueMapTable |
| 1.3.6.1.4.1.207.8.17.7.4.1 | RowatiStkSwQosDscpQueueMapEntry | not-accessible | current | atiStkSwQosDscpQueueMapEntry |
| 1.3.6.1.4.1.207.8.17.7.4.1.1 | ColumnatiStkSwQosDscpQueueMapPortId | read-only | current | Index into atiStkSwQosDscpQueueMapTable |
| 1.3.6.1.4.1.207.8.17.7.4.1.2 | ColumnatiStkSwQosDscpQueueMapQueue0 | read-write | current | atiStkSwQosDscpQueueMapQueue0 |
| 1.3.6.1.4.1.207.8.17.7.4.1.3 | ColumnatiStkSwQosDscpQueueMapQueue1 | read-write | current | atiStkSwQosDscpQueueMapQueue1 |
| 1.3.6.1.4.1.207.8.17.7.4.1.4 | ColumnatiStkSwQosDscpQueueMapQueue2 | read-write | current | atiStkSwQosDscpQueueMapQueue2 |
| 1.3.6.1.4.1.207.8.17.7.4.1.5 | ColumnatiStkSwQosDscpQueueMapQueue3 | read-write | current | atiStkSwQosDscpQueueMapQueue3 |
| 1.3.6.1.4.1.207.8.17.7.4.1.6 | ColumnatiStkSwQosDscpQueueMapQueue4 | read-write | current | atiStkSwQosDscpQueueMapQueue4 |
| 1.3.6.1.4.1.207.8.17.7.4.1.7 | ColumnatiStkSwQosDscpQueueMapQueue5 | read-write | current | atiStkSwQosDscpQueueMapQueue5 |
| 1.3.6.1.4.1.207.8.17.7.4.1.8 | ColumnatiStkSwQosDscpQueueMapQueue6 | read-write | current | atiStkSwQosDscpQueueMapQueue6 |
| 1.3.6.1.4.1.207.8.17.7.4.1.9 | ColumnatiStkSwQosDscpQueueMapQueue7 | read-write | current | atiStkSwQosDscpQueueMapQueue7 |
| 1.3.6.1.4.1.207.8.17.7.4.1.10 | ColumnatiStkSwQosDscpQueueMapDefaultMap | read-write | current | atiStkSwQosDscpQueueMapDefaultQueue |
| 1.3.6.1.4.1.207.8.17.8 | NodeatiStkSwTrunkGroup | |||
| 1.3.6.1.4.1.207.8.17.8.1 | TableatiStkSwStaticTrunkTable | not-accessible | current | This table contains a list of static trunk configuration present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.8.1.1 | RowatiStkSwStaticTrunkEntry | not-accessible | current | This object specifies an entry in 'atiStkSwStaticTrunkTable' that describes the static trunk informaton for a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.8.1.1.1 | ColumnatiStkSwStaticTrunkId | read-only | current | An identifier for a trunk. |
| 1.3.6.1.4.1.207.8.17.8.1.1.2 | ColumnatiStkSwStaticTrunkName | read-only | current | Name of a trunk, once the entry has created, it cannot be changed. |
| 1.3.6.1.4.1.207.8.17.8.1.1.3 | ColumnatiStkSwStaticTrunkMethod | read-write | current | Trunk distribution mode. |
| 1.3.6.1.4.1.207.8.17.8.1.1.4 | ColumnatiStkSwStaticTrunkPortList | read-only | current | A list of ports that used as a trunk port. |
| 1.3.6.1.4.1.207.8.17.8.1.1.5 | ColumnatiStkSwStaticTrunkStatus | read-only | current | The status of the trunk, either up or down. |
| 1.3.6.1.4.1.207.8.17.9 | NodeatiStkSwACLGroup | |||
| 1.3.6.1.4.1.207.8.17.9.1 | TableatiStkSwACLConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.9.1.1 | RowatiStkSwACLConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.9.1.1.1 | ColumnatiStkSwACLId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.2 | ColumnatiStkSwACLShowId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.3 | ColumnatiStkSwACLStatus | read-write | current | This object specifies the status of the ACL ID. |
| 1.3.6.1.4.1.207.8.17.9.1.1.4 | ColumnatiStkSwACLAction | read-write | current | The action of the ACL entry either deny or permit or copy to mirror. |
| 1.3.6.1.4.1.207.8.17.9.1.1.5 | ColumnatiStkSwACLTrafficType | read-write | current | The Object specifies the traffic type of the ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.6 | ColumnatiStkSwACLSrcType | read-write | current | The Object specifies the source type of the ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.7 | ColumnatiStkSwACLSrcAddr | read-write | current | This object displays the IPv4 address of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.8 | ColumnatiStkSwACLSrcMask | read-write | current | This object displays the IPv4 mask of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.9 | ColumnatiStkSwACLDestType | read-write | current | The Object specifies the destination type of the ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.10 | ColumnatiStkSwACLDestAddr | read-write | current | This object displays the IPv4 address of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.11 | ColumnatiStkSwACLDestMask | read-write | current | This object displays the IPv4 mask of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.9.1.1.12 | ColumnatiStkSwACLVlanId | read-write | current | This object specifies the Vlan ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.13 | ColumnatiStkSwACLProtocol | read-write | current | This object specifies the Protocol ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.14 | ColumnatiStkSwACLICMPType | read-write | current | This object specifies the ICMP Type of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.1.1.15 | ColumnatiStkSwACLUDPTCPSrcPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.9.1.1.16 | ColumnatiStkSwACLSrcPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.9.1.1.17 | ColumnatiStkSwACLSrcPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.9.1.1.18 | ColumnatiStkSwACLUDPTCPDestPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.9.1.1.19 | ColumnatiStkSwACLDestPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.9.1.1.20 | ColumnatiStkSwACLDestPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.9.2 | TableatiStkSwACLMACConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.9.2.1 | RowatiStkSwACLMACConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.9.2.1.1 | ColumnatiStkSwACLMACId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.2.1.2 | ColumnatiStkSwACLMACShowId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.9.2.1.3 | ColumnatiStkSwACLMACStatus | read-write | current | This object specifies the status of the ACL ID. |
| 1.3.6.1.4.1.207.8.17.9.2.1.4 | ColumnatiStkSwACLMACAction | read-write | current | The action of the ACL entry either deny or permit or copy to mirror. |
| 1.3.6.1.4.1.207.8.17.9.2.1.5 | ColumnatiStkSwACLMACSrc | read-write | current | This object specifies the source type. |
| 1.3.6.1.4.1.207.8.17.9.2.1.6 | ColumnatiStkSwACLMACDest | read-write | current | This object specifies destination type. |
| 1.3.6.1.4.1.207.8.17.9.2.1.7 | ColumnatiStkSwACLMACSrcMac | read-write | current | The MAC address Mask used by this source. |
| 1.3.6.1.4.1.207.8.17.9.2.1.8 | ColumnatiStkSwACLMACSrcMacMask | read-write | current | The MAC address Mask used by this source . |
| 1.3.6.1.4.1.207.8.17.9.2.1.9 | ColumnatiStkSwACLMACDestMac | read-write | current | The MAC address used by this destination. |
| 1.3.6.1.4.1.207.8.17.9.2.1.10 | ColumnatiStkSwACLMACDestMacMask | read-write | current | The MAC address Mask used by this destination. |
| 1.3.6.1.4.1.207.8.17.9.3 | TableatiStkSwACLInterfaceConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.9.3.1 | RowatiStkSwACLInterfaceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.9.3.1.1 | ColumnatiStkSwACLInterfaceModuleId | read-only | current | This object specifies the Module ID of the system. |
| 1.3.6.1.4.1.207.8.17.9.3.1.2 | ColumnatiStkSwACLInterfacePortId | read-only | current | This object specifies the Port ID of the system. |
| 1.3.6.1.4.1.207.8.17.9.3.1.3 | ColumnatiStkSwACLInterfacaeACLId | read-only | current | This object specifies the created ACL ID. |
| 1.3.6.1.4.1.207.8.17.9.3.1.4 | ColumnatiStkSwACLInterfacaeAddACLId | read-write | current | This object specifies the ACL ID to Add. |
| 1.3.6.1.4.1.207.8.17.9.3.1.5 | ColumnatiStkSwACLInterfacaeRemoveACLId | read-write | current | This object specifies the ACL ID to Remove. |
| 1.3.6.1.4.1.207.8.17.10 | NodeatiStkSwLldpGroup | |||
| 1.3.6.1.4.1.207.8.17.10.1 | NodeatiStkSwLldpConfig | |||
| 1.3.6.1.4.1.207.8.17.10.1.1 | ScalaratiStkSwLldpRun | read-write | current | The operational mode, whether enabled or disabled, of LLDP on the device. |
| 1.3.6.1.4.1.207.8.17.10.1.2 | ScalaratiStkSwLldpTimer | read-write | current | The interval at which LLDP frames are transmitted on behalf of this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.1.3 | ScalaratiStkSwLldpHoldMultiplier | read-write | current | The time-to-live value expressed as a multiple of the atiStkSwLldpTimer object. |
| 1.3.6.1.4.1.207.8.17.10.1.4 | ScalaratiStkSwLldpReinit | read-write | current | The atiStkSwLldpReinit indicates the delay (in units of seconds) from when lldp feature of a particular port becomes 'disabled' until re-initialization will be… |
| 1.3.6.1.4.1.207.8.17.10.1.5 | ScalaratiStkSwLldpTxDelay | read-write | current | The atiStkSwLldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP loc… |
| 1.3.6.1.4.1.207.8.17.10.1.6 | ScalaratiStkSwLldpNotificationInterval | read-write | current | This object controls the transmission of LLDP notifications. The agent must not generate more than one lldpRemTablesChange notification-event in the indicated … |
| 1.3.6.1.4.1.207.8.17.10.1.7 | ScalaratiStkSwLldpFaststartCount | read-write | current | The atiStkSwLldpFaststartCoun |
| 1.3.6.1.4.1.207.8.17.10.1.8 | ScalaratiStkSwLldpNonStrictMedTlvOrderCheck | read-write | current | The atiStkSwLldpNonStrictMedTlvOrderCheck |
| 1.3.6.1.4.1.207.8.17.10.1.9 | TableatiStkSwLldpConfigPortTable | not-accessible | current | The table that controls LLDP frame transmission on individual ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1 | RowatiStkSwLldpConfigPortEntry | not-accessible | current | LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports wh… |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.1 | ColumnatiStkSwLldpConfigModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.2 | ColumnatiStkSwLldpConfigPortId | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.3 | ColumnatiStkSwLldpConfigDirection | read-write | current | This object specifies the operation mode of the LLDP for the indicated port - whether to transmit and/or receive LLDP package, or do nothing. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.4 | ColumnatiStkSwLldpConfigNotif | read-write | current | The atiStkSwLldpConfigNotif controls, on a per port basis, whether or not notifications from the agent are enabled. The value enabled(1) means that notificatio… |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.5 | ColumnatiStkSwLldpConfigMgmtAddr | read-only | current | This object displays the IPv4 address to be advertised to neighbors (via the Management Address TLV) via specified ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.6 | ColumnatiStkSwLldpConfigTlvSelect | read-write | current | This enables specified optional TLVs for transmission in LLDP advertisement via the specified ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.7 | ColumnatiStkSwLldpConfigTlvDeselect | read-write | current | This disables specified optional TLVs for transmission in LLDP advertisement via the specified ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.8 | ColumnatiStkSwLldpConfigMedNotif | read-write | current | The atiStkSwLldpConfigMedNotif controls, on a per port basis, whether or not MED notifications from the agent are enabled. The value enabled(1) means that noti… |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.9 | ColumnatiStkSwLldpConfigMedTlvSelect | read-write | current | This enables specified MED TLVs for transmission in LLDP advertisement via the specified ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.10 | ColumnatiStkSwLldpConfigMedTlvDeselect | read-write | current | This disables specified MED TLVs for transmission in LLDP advertisement via the specified ports. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.11 | ColumnatiStkSwLldpConfigLocCoord | read-write | current | This assigns an LLDP Coordinate location information to the specified ports. Set 0 to reset. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.12 | ColumnatiStkSwLldpConfigLocCivic | read-write | current | This assigns an LLDP Civic location information to the specified ports. Set 0 to reset. |
| 1.3.6.1.4.1.207.8.17.10.1.9.1.13 | ColumnatiStkSwLldpConfigLocElin | read-write | current | This assigns an LLDP Elin location information to the specified ports. Set 0 to reset. |
| 1.3.6.1.4.1.207.8.17.10.2 | NodeatiStkSwLldpStats | |||
| 1.3.6.1.4.1.207.8.17.10.2.1 | ScalaratiStkSwLldpStatsGlobalReset | read-write | current | This clears all the LLDP statistics (packet and event counters). |
| 1.3.6.1.4.1.207.8.17.10.2.2 | ScalaratiStkSwLldpStatsTotalFramesOut | read-only | current | The number of LLDP frames transmitted by this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.2.3 | ScalaratiStkSwLldpStatsTotalFramesIn | read-only | current | The number of valid LLDP frames received by this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.2.4 | ScalaratiStkSwLldpStatsTotalFramesInError | read-only | current | The number of invalid LLDP frames received by this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.2.5 | ScalaratiStkSwLldpStatsTotalFramesInDropped | read-only | current | The number of LLDP frames received by this LLDP agent, and then discarded for any reason. |
| 1.3.6.1.4.1.207.8.17.10.2.6 | ScalaratiStkSwLldpStatsTotalTLVsUnrecognized | read-only | current | The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.2.7 | ScalaratiStkSwLldpStatsTotalTLVsDiscarded | read-only | current | The number of LLDP TLVs discarded for any reason by this LLDP agent. |
| 1.3.6.1.4.1.207.8.17.10.2.8 | ScalaratiStkSwLldpStatsTotalNewNeighbors | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into the Neighbor/Remote table. |
| 1.3.6.1.4.1.207.8.17.10.2.9 | ScalaratiStkSwLldpStatsTotalNeighborsDeleted | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from the Neighbor/Remote table. |
| 1.3.6.1.4.1.207.8.17.10.2.10 | ScalaratiStkSwLldpStatsTotalNeighborsDropped | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into the Neighbor/Remote table. |
| 1.3.6.1.4.1.207.8.17.10.2.11 | ScalaratiStkSwLldpStatsTotalNeighborsAgedOut | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in the Neighbor/Remote table. |
| 1.3.6.1.4.1.207.8.17.10.2.12 | TableatiStkSwLldpStatsPortTable | not-accessible | current | A table containing LLDP transmission and reception statistics for individual ports. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1 | RowatiStkSwLldpStatsPortEntry | not-accessible | current | LLDP frame transmission and reception statistics for a particular port. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.1 | ColumnatiStkSwLldpStatsModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.2 | ColumnatiStkSwLldpStatsPortId | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.3 | ColumnatiStkSwLldpStatsFramesOut | read-only | current | The number of LLDP frames transmitted by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.4 | ColumnatiStkSwLldpStatsFramesIn | read-only | current | The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.5 | ColumnatiStkSwLldpStatsFramesInError | read-only | current | The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.6 | ColumnatiStkSwLldpStatsFramesInDropped | read-only | current | The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD… |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.7 | ColumnatiStkSwLldpStatsTLVsUnrecognized | read-only | current | The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the … |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.8 | ColumnatiStkSwLldpStatsTLVsDiscarded | read-only | current | The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.9 | ColumnatiStkSwLldpStatsNewNeighbors | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in the Neighbor/Remote table associ… |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.10 | ColumnatiStkSwLldpStatsNeighborsDeleted | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from the Neighbor/Remote table associated with the indicat… |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.11 | ColumnatiStkSwLldpStatsNeighborsDropped | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into the Neighbor/Remote table associated with the ind… |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.12 | ColumnatiStkSwLldpStatsNeighborsAgedOut | read-only | current | The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised … |
| 1.3.6.1.4.1.207.8.17.10.2.12.1.13 | ColumnatiStkSwLldpStatsReset | read-write | current | This clears all the LLDP statistics (packet and event counters) associated with the indicated port. |
| 1.3.6.1.4.1.207.8.17.10.3 | NodeatiStkSwLldpLocalData | |||
| 1.3.6.1.4.1.207.8.17.10.3.1 | TableatiStkSwLldpLocalInfoTable | not-accessible | current | This table contains one or more rows per port information associated with the local system known to this agent. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1 | RowatiStkSwLldpLocalInfoEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.1 | ColumnatiStkSwLldpLocModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.2 | ColumnatiStkSwLldpLocPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.3 | ColumnatiStkSwLldpLocChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.4 | ColumnatiStkSwLldpLocChassisId | read-only | current | The string value used to identify the chassis component associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.5 | ColumnatiStkSwLldpLocPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated atiStkSwLldpLocPortId object. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.6 | ColumnatiStkSwLldpLocPortId | read-only | current | The string value used to identify the port component associated with a given port in the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.7 | ColumnatiStkSwLldpLocTtl | read-only | current | Time-to-live advertised by the given port |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.8 | ColumnatiStkSwLldpLocPortDesc | read-only | current | The string value used to identify the 802 LAN station's port description associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.9 | ColumnatiStkSwLldpLocSysName | read-only | current | The string value used to identify the system name of the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.10 | ColumnatiStkSwLldpLocSysDesc | read-only | current | The string value used to identify the system description of the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.11 | ColumnatiStkSwLldpLocSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.12 | ColumnatiStkSwLldpLocSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.13 | ColumnatiStkSwLldpLocManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated atiStkSwLldpLocManagmentAddr object. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.14 | ColumnatiStkSwLldpLocManAddr | read-only | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.15 | ColumnatiStkSwLldpLocManAddrLen | read-only | current | The total lenght of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent.The management address leng… |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.16 | ColumnatiStkSwLldpLocManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.17 | ColumnatiStkSwLldpLocManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.1.1.18 | ColumnatiStkSwLldpLocManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent. |
| 1.3.6.1.4.1.207.8.17.10.3.2 | TableatiStkSwLldpDot1LocTable | not-accessible | current | This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1 | RowatiStkSwLldpDot1LocEntry | not-accessible | current | Information about IEEE 802.1 organizationally defined LLDP extension. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.1 | ColumnatiStkSwLldpDot1LocModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.2 | ColumnatiStkSwLldpDot1LocPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.3 | ColumnatiStkSwLldpDot1LocPortVlanId | read-only | current | The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not kno… |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.4 | ColumnatiStkSwLldpDot1LocProtoVlanId | read-only | current | The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used i… |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.5 | ColumnatiStkSwLldpDot1LocProtoVlanSupported | read-only | current | The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.6 | ColumnatiStkSwLldpDot1LocProtoVlanEnabled | read-only | current | The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.7 | ColumnatiStkSwLldpDot1LocVlanId | read-only | current | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible. |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.8 | ColumnatiStkSwLldpDot1LocVlanName | read-only | current | The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value … |
| 1.3.6.1.4.1.207.8.17.10.3.2.1.9 | ColumnatiStkSwLldpDot1LocProtocolId | read-only | current | The octet string value used to identify the protocols associated with the given port of the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3 | NodeatiStkSwLldpLocalDot3Data | |||
| 1.3.6.1.4.1.207.8.17.10.3.3.1 | TableatiStkSwLldpDot3LocTable | not-accessible | current | This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agen… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1 | RowatiStkSwLldpDot3LocEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.1 | ColumnatiStkSwLldpDot3LocModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.2 | ColumnatiStkSwLldpDot3LocPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.3 | ColumnatiStkSwLldpDot3LocPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.4 | ColumnatiStkSwLldpDot3LocPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.5 | ColumnatiStkSwLldpDot3LocPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the l… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.6 | ColumnatiStkSwLldpDot3LocPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list po… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.7 | ColumnatiStkSwLldpDot3LocPowerPortClass | read-only | current | The value that identifies the port Class of the given port associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.8 | ColumnatiStkSwLldpDot3LocPowerMDISupported | read-only | current | The truth value used to indicate whether the MDI power is supported on the given port associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.9 | ColumnatiStkSwLldpDot3LocPowerMDIEnabled | read-only | current | The truth value used to identify whether MDI power is enabled on the given port associated with the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.10 | ColumnatiStkSwLldpDot3LocPowerPairControlable | read-only | current | The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair sel… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.11 | ColumnatiStkSwLldpDot3LocPowerPairs | read-only | current | This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.12 | ColumnatiStkSwLldpDot3LocPowerClass | read-only | current | This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local sy… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.13 | ColumnatiStkSwLldpDot3LocLinkAggStatus | read-only | current | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.14 | ColumnatiStkSwLldpDot3LocLinkAggPortId | read-only | current | This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port… |
| 1.3.6.1.4.1.207.8.17.10.3.3.1.1.15 | ColumnatiStkSwLldpDot3LocMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the given port of the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.4 | NodeatiStkSwLldpLocalMedData | |||
| 1.3.6.1.4.1.207.8.17.10.3.4.1 | TableatiStkSwLldpMedLocTable | not-accessible | current | This table contains one row per port of LLDP-MED information on the local system known to this agent. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1 | RowatiStkSwLldpMedLocEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.1 | ColumnatiStkSwLldpMedLocModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.2 | ColumnatiStkSwLldpMedLocPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.3 | ColumnatiStkSwLldpMedLocDeviceClass | read-only | current | Local Device Class. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.4 | ColumnatiStkSwLldpMedLocCapabilities | read-only | current | The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. E… |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.5 | ColumnatiStkSwLldpMedLocMediaPolicyAppType | read-only | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.7 | ColumnatiStkSwLldpMedLocMediaPolicyPriority | read-only | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.8 | ColumnatiStkSwLldpMedLocMediaPolicyDscp | read-only | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.9 | ColumnatiStkSwLldpMedLocMediaPolicyUnknown | read-only | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.10 | ColumnatiStkSwLldpMedLocMediaPolicyTagged | read-only | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.11 | ColumnatiStkSwLldpMedLocHardwareRev | read-only | current | The vendor-specific hardware revision string as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.12 | ColumnatiStkSwLldpMedLocFirmwareRev | read-only | current | The vendor-specific firmware revision string as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.13 | ColumnatiStkSwLldpMedLocSoftwareRev | read-only | current | The vendor-specific software revision string as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.14 | ColumnatiStkSwLldpMedLocSerialNum | read-only | current | The vendor-specific serial number as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.15 | ColumnatiStkSwLldpMedLocMfgName | read-only | current | The vendor-specific manufacturer name as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.16 | ColumnatiStkSwLldpMedLocModelName | read-only | current | The vendor-specific model name as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.17 | ColumnatiStkSwLldpMedLocAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the endpoint. |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.18 | ColumnatiStkSwLldpMedLocCoordLocation | read-only | current | Coordinate based location information |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.19 | ColumnatiStkSwLldpMedLocCivicLocation | read-only | current | Civic location information |
| 1.3.6.1.4.1.207.8.17.10.3.4.1.1.20 | ColumnatiStkSwLldpMedLocElinLocation | read-only | current | Elin location information |
| 1.3.6.1.4.1.207.8.17.10.4 | NodeatiStkSwLldpRemoteData | |||
| 1.3.6.1.4.1.207.8.17.10.4.1 | TableatiStkSwLldpRemBaseTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1 | RowatiStkSwLldpRemBaseEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.1 | ColumnatiStkSwLldpRemModuleNum | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.2 | ColumnatiStkSwLldpRemPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpRemPortNum… |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.3 | ColumnatiStkSwLldpRemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.4 | ColumnatiStkSwLldpRemChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.5 | ColumnatiStkSwLldpRemChassisId | read-only | current | The string value used to identify the chassis component associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.6 | ColumnatiStkSwLldpRemPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated atiStkSwLldpRemPortId object. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.7 | ColumnatiStkSwLldpRemPortId | read-only | current | The string value used to identify the port component associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.8 | ColumnatiStkSwLldpRemTtl | read-only | current | Time-to-live advertised by the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.9 | ColumnatiStkSwLldpRemPortDesc | read-only | current | The string value used to identify the description of the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.10 | ColumnatiStkSwLldpRemSysName | read-only | current | The string value used to identify the system name of the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.11 | ColumnatiStkSwLldpRemSysDesc | read-only | current | The string value used to identify the system description of the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.12 | ColumnatiStkSwLldpRemSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.13 | ColumnatiStkSwLldpRemSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.14 | ColumnatiStkSwLldpRemManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated atiStkSwLldpRemManAddr object. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.15 | ColumnatiStkSwLldpRemManAddr | read-only | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.16 | ColumnatiStkSwLldpRemManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.17 | ColumnatiStkSwLldpRemManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.1.1.18 | ColumnatiStkSwLldpRemManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. |
| 1.3.6.1.4.1.207.8.17.10.4.2 | TableatiStkSwLldpDot1RemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1 | RowatiStkSwLldpDot1RemEntry | not-accessible | current | Information about a particular port component. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.1 | ColumnatiStkSwLldpDot1RemModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.2 | ColumnatiStkSwLldpDot1RemPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpRemPortNum… |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.3 | ColumnatiStkSwLldpDot1RemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.4 | ColumnatiStkSwLldpDot1RemPortVlanId | read-only | current | The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not… |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.5 | ColumnatiStkSwLldpDot1RemProtoVlanId | read-only | current | The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are… |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.6 | ColumnatiStkSwLldpDot1RemProtoVlanSupported | read-only | current | The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.7 | ColumnatiStkSwLldpDot1RemProtoVlanEnabled | read-only | current | The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.8 | ColumnatiStkSwLldpDot1RemVlanId | read-only | current | The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.9 | ColumnatiStkSwLldpDot1RemVlanName | read-only | current | The string value used to identify VLAN name identified by the VLAN Id associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.2.1.10 | ColumnatiStkSwLldpDot1RemProtocolId | read-only | current | The octet string value used to identify the protocols associated with the given port of remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3 | NodeatiStkSwLldpRemDot3Data | |||
| 1.3.6.1.4.1.207.8.17.10.4.3.1 | TableatiStkSwLldpDot3RemTable | not-accessible | current | This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1 | RowatiStkSwLldpDot3RemEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.1 | ColumnatiStkSwLldpDot3RemModuleNum | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.2 | ColumnatiStkSwLldpDot3RemPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The atiStkSwLldpDot3RemPor… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.3 | ColumnatiStkSwLldpDot3RemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.4 | ColumnatiStkSwLldpDot3RemPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.5 | ColumnatiStkSwLldpDot3RemPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.6 | ColumnatiStkSwLldpDot3RemPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the r… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.7 | ColumnatiStkSwLldpDot3RemPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the co… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.8 | ColumnatiStkSwLldpDot3RemPowerPortClass | read-only | current | The value that identifies the port Class of the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.9 | ColumnatiStkSwLldpDot3RemPowerMDISupported | read-only | current | The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.10 | ColumnatiStkSwLldpDot3RemPowerMDIEnabled | read-only | current | The truth value used to identify whether MDI power is enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.11 | ColumnatiStkSwLldpDot3RemPowerPairControlable | read-only | current | The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair sel… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.12 | ColumnatiStkSwLldpDot3RemPowerPairs | read-only | current | This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.13 | ColumnatiStkSwLldpDot3RemPowerClass | read-only | current | This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote s… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.14 | ColumnatiStkSwLldpDot3RemLinkAggStatus | read-only | current | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.15 | ColumnatiStkSwLldpDot3RemLinkAggPortId | read-only | current | This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port… |
| 1.3.6.1.4.1.207.8.17.10.4.3.1.1.16 | ColumnatiStkSwLldpDot3RemMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.4 | NodeatiStkSwLldpRemMedData | |||
| 1.3.6.1.4.1.207.8.17.10.4.4.1 | TableatiStkSwLldpMedRemTable | not-accessible | current | This table contains LLDP-MED information of the remote system. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1 | RowatiStkSwLldpMedRemEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.1 | ColumnatiStkSwLldpMedRemModuleId | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.2 | ColumnatiStkSwLldpMedRemPortNum | read-only | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.3 | ColumnatiStkSwLldpMedRemIndex | read-only | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.4 | ColumnatiStkSwLldpMedRemDeviceClass | read-only | current | Device Class as advertised by the device remotely connected to the port. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.5 | ColumnatiStkSwLldpMedRemCapabilities | read-only | current | The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this p… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.6 | ColumnatiStkSwLldpMedRemMediaPolicyAppType | not-accessible | current | The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.7 | ColumnatiStkSwLldpMedRemMediaPolicyVlanID | read-only | current | An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.8 | ColumnatiStkSwLldpMedRemMediaPolicyPriority | read-only | current | This object contains the value of the 802.1p priority which is associated with the remote system connected at given port. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.9 | ColumnatiStkSwLldpMedRemMediaPolicyDscp | read-only | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system … |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.10 | ColumnatiStkSwLldpMedRemMediaPolicyUnknown | read-only | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.11 | ColumnatiStkSwLldpMedRemMediaPolicyTagged | read-only | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.12 | ColumnatiStkSwLldpMedRemHardwareRev | read-only | current | The vendor-specific hardware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.13 | ColumnatiStkSwLldpMedRemFirmwareRev | read-only | current | The vendor-specific firmware revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.14 | ColumnatiStkSwLldpMedRemSoftwareRev | read-only | current | The vendor-specific software revision string as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.15 | ColumnatiStkSwLldpMedRemSerialNum | read-only | current | The vendor-specific serial number as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.16 | ColumnatiStkSwLldpMedRemMfgName | read-only | current | The vendor-specific manufacturer name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.17 | ColumnatiStkSwLldpMedRemModelName | read-only | current | The vendor-specific model name as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.18 | ColumnatiStkSwLldpMedRemAssetID | read-only | current | The vendor-specific asset tracking identifier as advertised by the remote endpoint. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.19 | ColumnatiStkSwLldpMedRemXPoEDeviceType | read-only | current | Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Powe… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.20 | ColumnatiStkSwLldpMedRemXPoEPSEPowerAv | read-only | current | This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.21 | ColumnatiStkSwLldpMedRemXPoEPSEPowerSource | read-only | current | Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A va… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.22 | ColumnatiStkSwLldpMedRemXPoEPSEPowerPriority | read-only | current | This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power pr… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.23 | ColumnatiStkSwLldpMedRemXPoEPDPowerReq | read-only | current | This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts. |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.24 | ColumnatiStkSwLldpMedRemXPoEPDPowerSource | read-only | current | Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises… |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.25 | ColumnatiStkSwLldpMedRemXPoEPDPowerPriority | read-only | current | Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power … |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.26 | ColumnatiStkSwLldpMedRemCoordLocation | read-only | current | Coordinate based location information |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.27 | ColumnatiStkSwLldpMedRemCivicLocation | read-only | current | Civic location information |
| 1.3.6.1.4.1.207.8.17.10.4.4.1.1.28 | ColumnatiStkSwLldpMedRemElinLocation | read-only | current | Elin location information |
| 1.3.6.1.4.1.207.8.17.10.4.5 | TableatiStkSwLldpRemResetTable | not-accessible | current | This table resets the Neighbor Table of the specified port. |
| 1.3.6.1.4.1.207.8.17.10.4.5.1 | RowatiStkSwLldpRemResetEntry | not-accessible | current | Selection of module and port number for Neighbor Table to be reset. |
| 1.3.6.1.4.1.207.8.17.10.4.5.1.1 | ColumnatiStkSwLldpRemResetModuleNum | read-only | current | This object specifies the ID of a module present in the switch stack. |
| 1.3.6.1.4.1.207.8.17.10.4.5.1.2 | ColumnatiStkSwLldpRemResetPortNum | read-only | current | The index value used to identify the port component for Neighbor Table to be reset. |
| 1.3.6.1.4.1.207.8.17.10.4.5.1.3 | ColumnatiStkSwLldpRemReset | read-write | current | Select 'yes' for Neighbor Table to be reset. |
| 1.3.6.1.4.1.207.8.17.10.5 | TableatiStkSwLldpCivicLocationTable | not-accessible | current | A table of the LLDP civic-location. |
| 1.3.6.1.4.1.207.8.17.10.5.1 | RowatiStkSwLldpCivicLocationEntry | not-accessible | current | Attributes of an LLDP civiv-location. |
| 1.3.6.1.4.1.207.8.17.10.5.1.1 | ColumnatiStkSwLldpCivicLocationIdentifier | read-only | current | Index into atiStkSwLldpCivicLocationTable. |
| 1.3.6.1.4.1.207.8.17.10.5.1.2 | ColumnatiStkSwLldpCivicLocationValid | read-write | current | The civiv-location status. |
| 1.3.6.1.4.1.207.8.17.10.6 | TableatiStkSwLldpCoordLocationTable | not-accessible | current | A table of the LLDP coord-location. |
| 1.3.6.1.4.1.207.8.17.10.6.1 | RowatiStkSwLldpCoordLocationEntry | not-accessible | current | Attributes of an LLDP coord-location. |
| 1.3.6.1.4.1.207.8.17.10.6.1.1 | ColumnatiStkSwLldpCoordLocationIdentifier | read-only | current | Index into atiStkSwLldpCoordLocationTable. |
| 1.3.6.1.4.1.207.8.17.10.6.1.2 | ColumnatiStkSwLldpCoordLocationValid | read-write | current | The coord-location status. |
| 1.3.6.1.4.1.207.8.17.10.7 | TableatiStkSwLldpElinLocationTable | not-accessible | current | A table of the LLDP elin-location. |
| 1.3.6.1.4.1.207.8.17.10.7.1 | RowatiStkSwLldpElinLocationEntry | not-accessible | current | Attributes of an LLDP elin-location. |
| 1.3.6.1.4.1.207.8.17.10.7.1.1 | ColumnatiStkSwLldpElinLocationIdentifier | read-only | current | Index into atiStkSwLldpElinLocationTable. |
| 1.3.6.1.4.1.207.8.17.10.7.1.2 | ColumnatiStkSwLldpElinLocationElinId | read-write | current | The name of the elin-location. |
| 1.3.6.1.4.1.207.8.17.10.8 | TableatiStkSwLldpSetCivicLocationTable | not-accessible | current | A table of the LLDP set civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1 | RowatiStkSwLldpSetCivicLocationEntry | not-accessible | current | Attributes of an LLDP set civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.1 | ColumnatiStkSwLldpSetCivicLocationIdentifier | read-only | current | Index into atiStkSwLldpSetCivicLocationTable. |
| 1.3.6.1.4.1.207.8.17.10.8.1.2 | ColumnatiStkSwLldpSetCivicLocationCountry | read-write | current | The country of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.3 | ColumnatiStkSwLldpSetCivicLocationState | read-write | current | The state of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.4 | ColumnatiStkSwLldpSetCivicLocationCounty | read-write | current | The county of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.5 | ColumnatiStkSwLldpSetCivicLocationCity | read-write | current | The city of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.6 | ColumnatiStkSwLldpSetCivicLocationDivision | read-write | current | The division of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.7 | ColumnatiStkSwLldpSetCivicLocationNeighborhood | read-write | current | The neighborhood of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.8 | ColumnatiStkSwLldpSetCivicLocationStreetGroup | read-write | current | The street group of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.9 | ColumnatiStkSwLldpSetCivicLocationLeadingStreetDirection | read-write | current | The leading street direction of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.10 | ColumnatiStkSwLldpSetCivicLocationTrailingStreetDirection | read-write | current | The trailing street direction of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.11 | ColumnatiStkSwLldpSetCivicLocationStreetSuffix | read-write | current | The street suffix of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.12 | ColumnatiStkSwLldpSetCivicLocationHouseNumber | read-write | current | The house number of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.13 | ColumnatiStkSwLldpSetCivicLocationHouseNumberSuffix | read-write | current | The house number suffix of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.14 | ColumnatiStkSwLldpSetCivicLocationLandmark | read-write | current | The landmark of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.15 | ColumnatiStkSwLldpSetCivicLocationAdditionalInformation | read-write | current | The additional information of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.16 | ColumnatiStkSwLldpSetCivicLocationName | read-write | current | The name of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.17 | ColumnatiStkSwLldpSetCivicLocationPostalCode | read-write | current | The postal code of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.18 | ColumnatiStkSwLldpSetCivicLocationBuilding | read-write | current | The building of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.19 | ColumnatiStkSwLldpSetCivicLocationUnit | read-write | current | The unit of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.20 | ColumnatiStkSwLldpSetCivicLocationFloor | read-write | current | The floor of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.21 | ColumnatiStkSwLldpSetCivicLocationRoom | read-write | current | The room of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.22 | ColumnatiStkSwLldpSetCivicLocationPlaceType | read-write | current | The place type of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.23 | ColumnatiStkSwLldpSetCivicLocationPostalCommunityName | read-write | current | The postal community name of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.24 | ColumnatiStkSwLldpSetCivicLocationPostOfficeBox | read-write | current | The post office box of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.25 | ColumnatiStkSwLldpSetCivicLocationAdditionalCode | read-write | current | The additional code of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.26 | ColumnatiStkSwLldpSetCivicLocationSeat | read-write | current | The seat of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.27 | ColumnatiStkSwLldpSetCivicLocationPrimaryRoadName | read-write | current | The primary road name of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.28 | ColumnatiStkSwLldpSetCivicLocationRoadSection | read-write | current | The road section of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.29 | ColumnatiStkSwLldpSetCivicLocationBranchRoadName | read-write | current | The branch road name of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.30 | ColumnatiStkSwLldpSetCivicLocationSubBranchRoadName | read-write | current | The sub branch road name of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.31 | ColumnatiStkSwLldpSetCivicLocationStreetNamePreModifier | read-write | current | The street name pre modifier of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.32 | ColumnatiStkSwLldpSetCivicLocationStreetNamePostModifier | read-write | current | The street name post modifier of the civic-location. |
| 1.3.6.1.4.1.207.8.17.10.8.1.33 | ColumnatiStkSwLldpSetCivicLocationCreateDeleteIdentifier | read-write | current | Create and delete an identifier |
| 1.3.6.1.4.1.207.8.17.10.9 | TableatiStkSwLldpSetCoordLocationTable | not-accessible | current | A table of the LLDP set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1 | RowatiStkSwLldpSetCoordLocationEntry | not-accessible | current | Attributes of an LLDP set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.1 | ColumnatiStkSwLldpSetCoordLocationIdentifier | read-only | current | Index into atiStkSwLldpSetCoordLocationTable. |
| 1.3.6.1.4.1.207.8.17.10.9.1.2 | ColumnatiStkSwLldpSetCoordLocationLatitude | read-write | current | Latitude for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.3 | ColumnatiStkSwLldpSetCoordLocationLatResolution | read-write | current | Latitude Resolution for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.4 | ColumnatiStkSwLldpSetCoordLocationLongitude | read-write | current | Longitude for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.5 | ColumnatiStkSwLldpSetCoordLocationLongiResolution | read-write | current | Longitude Resolution for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.6 | ColumnatiStkSwLldpSetCoordLocationAltitude | read-write | current | Altitude for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.7 | ColumnatiStkSwLldpSetCoordLocationAltType | read-write | current | Alt Type for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.8 | ColumnatiStkSwLldpSetCoordLocationAltResolution | read-write | current | Alt Resolution for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.10.9.1.9 | ColumnatiStkSwLldpSetCoordLocationDatum | read-write | current | Datum for set Coord-location. |
| 1.3.6.1.4.1.207.8.17.11 | NodeatiSflowRcvrGroup | |||
| 1.3.6.1.4.1.207.8.17.11.1 | TableatiSflowRcvrTable | not-accessible | current | A table of the receivers of sFlow information. |
| 1.3.6.1.4.1.207.8.17.11.1.1 | RowatiSflowRcvrEntry | not-accessible | current | Attributes of an sFlow Receiver. |
| 1.3.6.1.4.1.207.8.17.11.1.1.1 | ColumnatiSflowRcvrIndex | read-only | current | Index into sFlowReceiverTable. |
| 1.3.6.1.4.1.207.8.17.11.1.1.2 | ColumnatiSflowRcvrAddress | read-write | current | The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent. |
| 1.3.6.1.4.1.207.8.17.11.1.1.3 | ColumnatiSflowRcvrPort | read-write | current | The destination port for sFlow datagrams. |
| 1.3.6.1.4.1.207.8.17.12 | NodeatiSflowFsGroup | |||
| 1.3.6.1.4.1.207.8.17.12.1 | TableatiSflowFsTable | not-accessible | current | A table of the flow samplers within a device. |
| 1.3.6.1.4.1.207.8.17.12.1.1 | RowatiSflowFsEntry | not-accessible | current | Attributes of a flow sampler. |
| 1.3.6.1.4.1.207.8.17.12.1.1.1 | ColumnatiSflowFsPort | read-only | current | The sFlow instance for this flow sampler. |
| 1.3.6.1.4.1.207.8.17.12.1.1.2 | ColumnatiSflowFsPacketSamplingRate | read-write | current | The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its … |
| 1.3.6.1.4.1.207.8.17.13 | NodeatiSflowCpGroup | |||
| 1.3.6.1.4.1.207.8.17.13.1 | TableatiSflowCpTable | not-accessible | current | A table of the counter pollers within a device. |
| 1.3.6.1.4.1.207.8.17.13.1.1 | RowatiSflowCpEntry | not-accessible | current | Attributes of a counter poller. |
| 1.3.6.1.4.1.207.8.17.13.1.1.1 | ColumnatiSflowCpPort | read-only | current | The sFlowInstance for this counter poller. |
| 1.3.6.1.4.1.207.8.17.13.1.1.2 | ColumnatiSflowCpInterval | read-write | current | The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. … |
| 1.3.6.1.4.1.207.8.17.14 | NodeatiSflowSetGroup | |||
| 1.3.6.1.4.1.207.8.17.14.1 | TableatiSflowSetTable | not-accessible | current | A table of the sFlow set function. |
| 1.3.6.1.4.1.207.8.17.14.1.1 | RowatiSflowSetEntry | not-accessible | current | Attributes of an sFlow Set. |
| 1.3.6.1.4.1.207.8.17.14.1.1.1 | ColumnatiSflowSetIndex | read-only | current | Index into sFlowSetTable. |
| 1.3.6.1.4.1.207.8.17.14.1.1.2 | ColumnatiSflowSetAddress | read-only | current | The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent. |
| 1.3.6.1.4.1.207.8.17.14.1.1.3 | ColumnatiSflowSetPort | read-only | current | The port for sFlow Sampler or Poller. |
| 1.3.6.1.4.1.207.8.17.14.1.1.4 | ColumnatiSflowSetStatus | read-write | current | The set status. |
| 1.3.6.1.4.1.207.8.17.15 | NodeatiSflowEnableGroup | |||
| 1.3.6.1.4.1.207.8.17.15.1 | TableatiSflowEnableTable | not-accessible | current | A table of the sFlow enable function. |
| 1.3.6.1.4.1.207.8.17.15.1.1 | RowatiSflowEnableEntry | not-accessible | current | Attributes of an sFlow Enable. |
| 1.3.6.1.4.1.207.8.17.15.1.1.1 | ColumnatiSflowEnablePort | read-only | current | Index into sFlowEnableTable. |
| 1.3.6.1.4.1.207.8.17.15.1.1.2 | ColumnatiSflowEnableStatus | read-write | current | The enable status. |
| 1.3.6.1.4.1.207.8.17.17 | NodeatiStkSwAQoSGroup | |||
| 1.3.6.1.4.1.207.8.17.17.1 | TableatiAQosPortConfigurationTable | not-accessible | current | atiAQosPortConfigurationTable |
| 1.3.6.1.4.1.207.8.17.17.1.1 | RowatiAQosPortConfigurationEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.1.1.1 | ColumnatiAQosPortConfigurationPortId | read-only | current | Index into atiAQosPortConfigurationTable |
| 1.3.6.1.4.1.207.8.17.17.1.1.2 | ColumnatiAQosPortConfigurationStatus | read-write | current | Status |
| 1.3.6.1.4.1.207.8.17.17.1.1.3 | ColumnatiAQosPortConfigurationDefaultQueue | read-write | current | Default queue |
| 1.3.6.1.4.1.207.8.17.17.1.1.4 | ColumnatiAQosPortConfigurationSchedularAndQueueWeightList | read-write | current | Schedular and queue weight list |
| 1.3.6.1.4.1.207.8.17.17.1.1.5 | ColumnatiAQosPortConfigurationWRREgressRateQ0 | read-write | current | WRR egress rate Queue 0 |
| 1.3.6.1.4.1.207.8.17.17.1.1.6 | ColumnatiAQosPortConfigurationWRREgressRateQ1 | read-write | current | WRR egress rate Queue 1 |
| 1.3.6.1.4.1.207.8.17.17.1.1.7 | ColumnatiAQosPortConfigurationWRREgressRateQ2 | read-write | current | WRR egress rate Queue 2 |
| 1.3.6.1.4.1.207.8.17.17.1.1.8 | ColumnatiAQosPortConfigurationWRREgressRateQ3 | read-write | current | WRR egress rate Queue 3 |
| 1.3.6.1.4.1.207.8.17.17.1.1.9 | ColumnatiAQosPortConfigurationWRREgressRateQ4 | read-write | current | WRR egress rate Queue 4 |
| 1.3.6.1.4.1.207.8.17.17.1.1.10 | ColumnatiAQosPortConfigurationWRREgressRateQ5 | read-write | current | WRR egress rate Queue 5 |
| 1.3.6.1.4.1.207.8.17.17.1.1.11 | ColumnatiAQosPortConfigurationWRREgressRateQ6 | read-write | current | WRR egress rate Queue 6 |
| 1.3.6.1.4.1.207.8.17.17.1.1.12 | ColumnatiAQosPortConfigurationWRREgressRateQ7 | read-write | current | WRR egress rate Queue 7 |
| 1.3.6.1.4.1.207.8.17.17.2 | TableatiAQosCosQueueMapTable | not-accessible | current | atiAQosCosQueueMapTable |
| 1.3.6.1.4.1.207.8.17.17.2.1 | RowatiAQosCosQueueMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.2.1.1 | ColumnatiAQosCosQueueMapPortId | read-only | current | Index into atiAQosCosQueueMapTable |
| 1.3.6.1.4.1.207.8.17.17.2.1.2 | ColumnatiAQosCosQueueMapCos0Queue | read-write | current | Cos 0 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.3 | ColumnatiAQosCosQueueMapCos1Queue | read-write | current | Cos 1 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.4 | ColumnatiAQosCosQueueMapCos2Queue | read-write | current | Cos 2 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.5 | ColumnatiAQosCosQueueMapCos3Queue | read-write | current | Cos 3 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.6 | ColumnatiAQosCosQueueMapCos4Queue | read-write | current | Cos 4 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.7 | ColumnatiAQosCosQueueMapCos5Queue | read-write | current | Cos 5 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.8 | ColumnatiAQosCosQueueMapCos6Queue | read-write | current | Cos 6 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.9 | ColumnatiAQosCosQueueMapCos7Queue | read-write | current | Cos 7 queue |
| 1.3.6.1.4.1.207.8.17.17.2.1.10 | ColumnatiAQosCosQueueMapDefaultMap | read-write | current | Default map |
| 1.3.6.1.4.1.207.8.17.17.3 | TableatiAQosDscpQueueMapTable | not-accessible | current | atiAQosDscpQueueMapTable |
| 1.3.6.1.4.1.207.8.17.17.3.1 | RowatiAQosDscpQueueMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.3.1.1 | ColumnatiAQosDscpQueueMapPortId | read-only | current | Index into atiAQosDscpQueueMapTable |
| 1.3.6.1.4.1.207.8.17.17.3.1.2 | ColumnatiAQosDscpQueueMapQueue0 | read-write | current | Queue 0 |
| 1.3.6.1.4.1.207.8.17.17.3.1.3 | ColumnatiAQosDscpQueueMapQueue1 | read-write | current | Queue 1 |
| 1.3.6.1.4.1.207.8.17.17.3.1.4 | ColumnatiAQosDscpQueueMapQueue2 | read-write | current | Queue 2 |
| 1.3.6.1.4.1.207.8.17.17.3.1.5 | ColumnatiAQosDscpQueueMapQueue3 | read-write | current | Queue 3 |
| 1.3.6.1.4.1.207.8.17.17.3.1.6 | ColumnatiAQosDscpQueueMapQueue4 | read-write | current | Queue 4 |
| 1.3.6.1.4.1.207.8.17.17.3.1.7 | ColumnatiAQosDscpQueueMapQueue5 | read-write | current | Queue 5 |
| 1.3.6.1.4.1.207.8.17.17.3.1.8 | ColumnatiAQosDscpQueueMapQueue6 | read-write | current | Queue 6 |
| 1.3.6.1.4.1.207.8.17.17.3.1.9 | ColumnatiAQosDscpQueueMapQueue7 | read-write | current | Queue 7 |
| 1.3.6.1.4.1.207.8.17.17.3.1.10 | ColumnatiAQosDscpQueueMapDefaultMap | read-write | current | Default map |
| 1.3.6.1.4.1.207.8.17.17.4 | TableatiAQosAggregatePolicerTable | not-accessible | current | atiAQosAggregatePolicerTable |
| 1.3.6.1.4.1.207.8.17.17.4.1 | RowatiAQosAggregatePolicerEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.4.1.1 | ColumnatiAQosAggregatePolicerIndex | read-only | current | Index into atiAQosAggregatePolicerTable |
| 1.3.6.1.4.1.207.8.17.17.4.1.2 | ColumnatiAQosAggregatePolicerName | read-write | current | Aggregate police name |
| 1.3.6.1.4.1.207.8.17.17.4.1.3 | ColumnatiAQosAggregatePolicerRate | read-write | current | Rate |
| 1.3.6.1.4.1.207.8.17.17.4.1.4 | ColumnatiAQosAggregatePolicerCIRkbps | read-write | current | CIR kbps |
| 1.3.6.1.4.1.207.8.17.17.4.1.5 | ColumnatiAQosAggregatePolicerCBSb | read-write | current | CBS b |
| 1.3.6.1.4.1.207.8.17.17.4.1.6 | ColumnatiAQosAggregatePolicerPIRkbps | read-write | current | PIR kbps |
| 1.3.6.1.4.1.207.8.17.17.4.1.7 | ColumnatiAQosAggregatePolicerPBSb | read-write | current | PBS b |
| 1.3.6.1.4.1.207.8.17.17.4.1.8 | ColumnatiAQosAggregatePolicerAction | read-write | current | Action |
| 1.3.6.1.4.1.207.8.17.17.5 | TableatiAQosInterfacePolicyTable | not-accessible | current | atiAQosInterfacePolicyTable |
| 1.3.6.1.4.1.207.8.17.17.5.1 | RowatiAQosInterfacePolicyEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.5.1.1 | ColumnatiAQosInterfacePolicyPortId | read-only | current | Index into atiAQosInterfacePolicyTable |
| 1.3.6.1.4.1.207.8.17.17.5.1.2 | ColumnatiAQosInterfacePolicyMapName | read-write | current | Policy map name |
| 1.3.6.1.4.1.207.8.17.17.6 | TableatiAQosPolicyMapTable | not-accessible | current | atiAQosPolicyMapTable |
| 1.3.6.1.4.1.207.8.17.17.6.1 | RowatiAQosPolicyMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.6.1.1 | ColumnatiAQosPolicyMapIndex | read-only | current | Index into atiAQosPolicyMapTable |
| 1.3.6.1.4.1.207.8.17.17.6.1.2 | ColumnatiAQosPolicyMapPolicyName | read-write | current | Policy name |
| 1.3.6.1.4.1.207.8.17.17.6.1.3 | ColumnatiAQosPolicyMapClassName | read-write | current | Class name |
| 1.3.6.1.4.1.207.8.17.17.6.1.4 | ColumnatiAQosPolicyMapDefaultAction | read-write | current | Action of default class-map |
| 1.3.6.1.4.1.207.8.17.17.6.1.5 | ColumnatiAQosPolicyMapCosAction | read-write | current | Cos action |
| 1.3.6.1.4.1.207.8.17.17.6.1.6 | ColumnatiAQosPolicyMapDscpAction | read-write | current | Dscp action |
| 1.3.6.1.4.1.207.8.17.17.6.1.7 | ColumnatiAQosPolicyMapIpNextHopAction | read-write | current | Ip next hop action |
| 1.3.6.1.4.1.207.8.17.17.6.1.8 | ColumnatiAQosPolicyMapQueueAction | read-write | current | Queue action |
| 1.3.6.1.4.1.207.8.17.17.6.1.9 | ColumnatiAQosPolicyMapTrustAction | read-write | current | Trust action |
| 1.3.6.1.4.1.207.8.17.17.6.1.10 | ColumnatiAQosPolicyMapPoliceAggregateAction | read-write | current | Police aggregate action |
| 1.3.6.1.4.1.207.8.17.17.6.1.11 | ColumnatiAQosPolicyMapStormAction | read-write | current | Storm action |
| 1.3.6.1.4.1.207.8.17.17.6.1.12 | ColumnatiAQosPolicyMapStormDowntimeAction | read-write | current | Storm downtime action |
| 1.3.6.1.4.1.207.8.17.17.6.1.13 | ColumnatiAQosPolicyMapStormRateAction | read-write | current | Storm rate action |
| 1.3.6.1.4.1.207.8.17.17.6.1.14 | ColumnatiAQosPolicyMapStormWindowAction | read-write | current | Storm window action |
| 1.3.6.1.4.1.207.8.17.17.7 | TableatiAQosClassMapTable | not-accessible | current | atiAQosClassMapTable |
| 1.3.6.1.4.1.207.8.17.17.7.1 | RowatiAQosClassMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.207.8.17.17.7.1.1 | ColumnatiAQosClassMapIndex | read-only | current | Index into atiAQosClassMapTable |
| 1.3.6.1.4.1.207.8.17.17.7.1.2 | ColumnatiAQosClassMapClassName | read-write | current | Class name |
| 1.3.6.1.4.1.207.8.17.17.7.1.3 | ColumnatiAQosClassMapAccessGroupMatch | read-write | current | Access group match |
| 1.3.6.1.4.1.207.8.17.17.7.1.4 | ColumnatiAQosClassMapCosMatch | read-write | current | Cos match |
| 1.3.6.1.4.1.207.8.17.17.7.1.5 | ColumnatiAQosClassMapDscpMatch | read-write | current | Dscp match |
| 1.3.6.1.4.1.207.8.17.17.7.1.6 | ColumnatiAQosClassMapInnerCosMatch | read-write | current | Inner cos match |
| 1.3.6.1.4.1.207.8.17.17.7.1.7 | ColumnatiAQosClassMapInnerVlanMatch | read-write | current | Inner vlan match |
| 1.3.6.1.4.1.207.8.17.17.7.1.8 | ColumnatiAQosClassMapIpPrecedenceMatch | read-write | current | Ip precedence vlan match |
| 1.3.6.1.4.1.207.8.17.17.7.1.9 | ColumnatiAQosClassMapMacTypeMatch | read-write | current | Mac type match |
| 1.3.6.1.4.1.207.8.17.17.7.1.10 | ColumnatiAQosClassVlanMatch | read-write | current | Vlan match |
| 1.3.6.1.4.1.207.8.17.17.7.1.11 | ColumnatiAQosClassTcpFlagsMatch | read-write | current | Tcp flags match |
| 1.3.6.1.4.1.207.8.17.17.7.1.12 | ColumnatiAQosClassL2FormatMatch | read-write | current | L2 format match |
| 1.3.6.1.4.1.207.8.17.17.7.1.13 | ColumnatiAQosClassL3ProtocolMatch | read-write | current | L3 protocol match |
| 1.3.6.1.4.1.207.8.17.18 | NodeatiStkSwAACLGroup | |||
| 1.3.6.1.4.1.207.8.17.18.1 | TableatiStkSwAACLIpv4ConfigTable | not-accessible | current | This table contains a Access Control List (ACL) for Ipv4 addresses in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.18.1.1 | RowatiStkSwAACLIpv4ConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.18.1.1.1 | ColumnatiStkSwAACLId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.1.1.2 | ColumnatiStkSwAACLStatus | read-write | current | This object specifies the status of the ACL ID. |
| 1.3.6.1.4.1.207.8.17.18.1.1.3 | ColumnatiStkSwAACLName | read-write | current | This object specifies the name of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.4 | ColumnatiStkSwAACLAction | read-write | current | The action of the ACL entry either deny or permit or copy to mirror. |
| 1.3.6.1.4.1.207.8.17.18.1.1.5 | ColumnatiStkSwAACLTrafficType | read-write | current | The Object specifies the traffic type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.6 | ColumnatiStkSwAACLSrcType | read-write | current | The Object specifies the source type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.7 | ColumnatiStkSwAACLSrcAddr | read-write | current | This object displays the IPv4 address of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.8 | ColumnatiStkSwAACLSrcMask | read-write | current | This object displays the IPv4 mask of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.9 | ColumnatiStkSwAACLDestType | read-write | current | The Object specifies the destination type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.10 | ColumnatiStkSwAACLDestAddr | read-write | current | This object displays the IPv4 address of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.11 | ColumnatiStkSwAACLDestMask | read-write | current | This object displays the IPv4 mask of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.1.1.12 | ColumnatiStkSwAACLVlanId | read-write | current | This object specifies the Vlan ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.1.1.13 | ColumnatiStkSwAACLProtocol | read-write | current | This object specifies the Protocol ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.1.1.14 | ColumnatiStkSwAACLICMPType | read-write | current | This object specifies the ICMP Type of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.1.1.15 | ColumnatiStkSwAACLUDPTCPSrcPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.16 | ColumnatiStkSwAACLSrcPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.17 | ColumnatiStkSwAACLSrcPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.18 | ColumnatiStkSwAACLUDPTCPDestPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.19 | ColumnatiStkSwAACLDestPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.20 | ColumnatiStkSwAACLDestPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.1.1.21 | ColumnatiStkSwAACLTimeRange | read-write | current | This object specifies the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.2 | TableatiStkSwAACLIpv6ConfigTable | not-accessible | current | This table contains a Access Control List (ACL) for Ipv4 addresses in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.18.2.1 | RowatiStkSwAACLIpv6ConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.18.2.1.1 | ColumnatiStkSwAACLv6Id | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.2.1.2 | ColumnatiStkSwAACLv6Status | read-write | current | This object specifies the status of the ACL ID. |
| 1.3.6.1.4.1.207.8.17.18.2.1.3 | ColumnatiStkSwAACLv6Name | read-write | current | This object specifies the name of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.4 | ColumnatiStkSwAACLv6Action | read-write | current | The action of the ACL entry either deny or permit or copy to mirror. |
| 1.3.6.1.4.1.207.8.17.18.2.1.5 | ColumnatiStkSwAACLv6TrafficType | read-write | current | The Object specifies the traffic type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.6 | ColumnatiStkSwAACLv6SrcType | read-write | current | The Object specifies the source type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.7 | ColumnatiStkSwAACLv6SrcAddr | read-write | current | This object displays the IPv6 address of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.8 | ColumnatiStkSwAACLv6SrcMask | read-write | current | This object displays the IPv6 mask of the source of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.9 | ColumnatiStkSwAACLv6DestType | read-write | current | The Object specifies the destination type of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.10 | ColumnatiStkSwAACLv6DestAddr | read-write | current | This object displays the IPv6 address of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.11 | ColumnatiStkSwAACLv6DestMask | read-write | current | This object displays the IPv6 mask of the destination of an ACL. |
| 1.3.6.1.4.1.207.8.17.18.2.1.12 | ColumnatiStkSwAACLv6VlanId | read-write | current | This object specifies the Vlan ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.2.1.13 | ColumnatiStkSwAACLv6Protocol | read-write | current | This object specifies the Protocol ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.2.1.14 | ColumnatiStkSwAACLv6ICMPType | read-write | current | This object specifies the ICMP Type of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.2.1.15 | ColumnatiStkSwAACLv6UDPTCPSrcPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.16 | ColumnatiStkSwAACLv6SrcPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.17 | ColumnatiStkSwAACLv6SrcPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.18 | ColumnatiStkSwAACLv6UDPTCPDestPort | read-write | current | The Object specifies the comparision of the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.19 | ColumnatiStkSwAACLv6DestPort1 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.20 | ColumnatiStkSwAACLv6DestPort2 | read-write | current | This object specifies the port. |
| 1.3.6.1.4.1.207.8.17.18.2.1.21 | ColumnatiStkSwAACLv6TimeRange | read-write | current | This object specifies the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.3 | TableatiStkSwAACLInterfaceConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.18.3.1 | RowatiStkSwAACLInterfaceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.18.3.1.1 | ColumnatiStkSwAACLInterfaceModuleId | read-only | current | This object specifies the Module ID of the system. |
| 1.3.6.1.4.1.207.8.17.18.3.1.2 | ColumnatiStkSwAACLInterfacePortId | read-only | current | This object specifies the Port ID of the system. |
| 1.3.6.1.4.1.207.8.17.18.3.1.3 | ColumnatiStkSwAACLInterfacaeACLName | read-only | current | This object specifies the created ACL ID. |
| 1.3.6.1.4.1.207.8.17.18.3.1.4 | ColumnatiStkSwAACLInterfacaeAddACLName | read-write | current | This object specifies the ACL ID to Add. |
| 1.3.6.1.4.1.207.8.17.18.3.1.5 | ColumnatiStkSwAACLInterfacaeRemoveACLName | read-write | current | This object specifies the ACL ID to Remove. |
| 1.3.6.1.4.1.207.8.17.18.4 | TableatiStkSwAACLTimeRangeConfigTable | not-accessible | current | This table contains a time range Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.18.4.1 | RowatiStkSwAACLTimeRangeConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwAACLTimeRangeAbsoluteConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.18.4.1.1 | ColumnatiStkSwAACLTimeRangeEntry | read-only | current | This object specifies the entry of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.2 | ColumnatiStkSwAACLTimeRangeName | read-write | current | This object specifies the Name of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.3 | ColumnatiStkSwAACLTimeRangeType | read-write | current | This object specifies the type of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.4 | ColumnatiStkSwAACLTimeRangeAbsoluteStartTime | read-write | current | This object specifies the start time of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.5 | ColumnatiStkSwAACLTimeRangeAbsoluteEndTime | read-write | current | This object specifies the end time of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.6 | ColumnatiStkSwAACLTimeRangePeriodicFrequency | read-write | current | This object specifies the Frequency of days for periodic time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.7 | ColumnatiStkSwAACLTimeRangePeriodicStartDay | read-write | current | This object specifies the start day for periodic time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.8 | ColumnatiStkSwAACLTimeRangePeriodicEndDay | read-write | current | This object specifies the end day for periodic time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.9 | ColumnatiStkSwAACLTimeRangePeriodicStartTime | read-write | current | This object specifies the start time of the periodic time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.10 | ColumnatiStkSwAACLTimeRangePeriodicEndTime | read-write | current | This object specifies the end time of the periodic time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.4.1.11 | ColumnatiStkSwAACLTimeRangeStatus | read-write | current | This object specifies the status of the time range ACL. |
| 1.3.6.1.4.1.207.8.17.18.5 | TableatiStkSwAACLIPV4MACConfigTable | not-accessible | current | This table contains a Access Control List (ACL) in the switch and their associated attributes. |
| 1.3.6.1.4.1.207.8.17.18.5.1 | RowatiStkSwAACLIPV4MACConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwACLMACConfigTable' that describes the ACL in the switch. |
| 1.3.6.1.4.1.207.8.17.18.5.1.1 | ColumnatiStkSwAACLIPV4MACId | read-only | current | This object specifies the ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.5.1.2 | ColumnatiStkSwAACLIPV4MACName | read-write | current | This object specifies the name of the ACL. |
| 1.3.6.1.4.1.207.8.17.18.5.1.3 | ColumnatiStkSwAACLIPV4MACStatus | read-write | current | This object specifies the status of the ACL ID. |
| 1.3.6.1.4.1.207.8.17.18.5.1.4 | ColumnatiStkSwAACLIPV4MACAction | read-write | current | The action of the ACL entry either deny or permit or copy to mirror. |
| 1.3.6.1.4.1.207.8.17.18.5.1.5 | ColumnatiStkSwAACLIPV4MACSrc | read-write | current | This object specifies the source type. |
| 1.3.6.1.4.1.207.8.17.18.5.1.6 | ColumnatiStkSwAACLIPV4MACDest | read-write | current | This object specifies destination type. |
| 1.3.6.1.4.1.207.8.17.18.5.1.7 | ColumnatiStkSwAACLIPV4MACSrcMac | read-write | current | The MAC address Mask used by this source. |
| 1.3.6.1.4.1.207.8.17.18.5.1.8 | ColumnatiStkSwAACLIPV4MACSrcMacMask | read-write | current | The MAC address Mask used by this source . |
| 1.3.6.1.4.1.207.8.17.18.5.1.9 | ColumnatiStkSwAACLIPV4MACDestMac | read-write | current | The MAC address used by this destination. |
| 1.3.6.1.4.1.207.8.17.18.5.1.10 | ColumnatiStkSwAACLIPV4MACDestMacMask | read-write | current | The MAC address Mask used by this destination. |
| 1.3.6.1.4.1.207.8.17.18.5.1.11 | ColumnatiStkSwAACLIPV4MACVlanId | read-write | current | This object specifies the Vlan ID of the ACL table. |
| 1.3.6.1.4.1.207.8.17.18.5.1.12 | ColumnatiStkSwAACLIPV4MACTimeRange | read-write | current | This object specifies the time range ACL. |
| 1.3.6.1.4.1.207.8.17.19 | NodeatiStkSwMSTPGroup | |||
| 1.3.6.1.4.1.207.8.17.19.1 | NodeatiStkSwMSTPMstConfigTable | |||
| 1.3.6.1.4.1.207.8.17.19.1.1 | ScalaratiStkSwMSTPMstRegion | read-write | current | Set the Region name for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.1.2 | ScalaratiStkSwMSTPMstRevision | read-write | current | Set the revision number for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.2 | TableatiStkSwMSTPMstInstanceConfigTable | not-accessible | current | This table contains a mst-config Instance associated attributes. |
| 1.3.6.1.4.1.207.8.17.19.2.1 | RowatiStkSwMSTPMstInstanceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMSTPMstInstanceConfigTable' that describes the mst config in the switch. |
| 1.3.6.1.4.1.207.8.17.19.2.1.1 | ColumnatiStkSwMSTPMstInstanceId | read-only | current | This object specifies the Instance ID for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.2.1.2 | ColumnatiStkSwMSTPMstInstanceVlan | read-write | current | This object associates the Instance ID with vlanId for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.2.1.3 | ColumnatiStkSwMSTPMstInstancePriority | read-write | current | This object associates the Instance ID with priority for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.3 | TableatiStkSwMSTPMstInterfaceConfigTable | not-accessible | current | This table contains a mstp interface level config. |
| 1.3.6.1.4.1.207.8.17.19.3.1 | RowatiStkSwMSTPMstInterfaceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMSTPMstInterfaceConfigTable' that describes the mstp interface levl config in the switch. |
| 1.3.6.1.4.1.207.8.17.19.3.1.1 | ColumnatiStkSwMSTPMstInterfaceModuleId | read-only | current | This object specifies the module ID for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.3.1.2 | ColumnatiStkSwMSTPMstInterfacePortId | read-only | current | This object specifies the port ID for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.3.1.3 | ColumnatiStkSwMSTPMstInterfaceInstanceId | read-write | current | This object associates the port ID with instance id for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.3.1.4 | ColumnatiStkSwMSTPMstInterfacePathCost | read-write | current | This object associates the path cost with instance id for MSTP. |
| 1.3.6.1.4.1.207.8.17.19.3.1.5 | ColumnatiStkSwMSTPMstInterfacePriority | read-write | current | This object associates the priority with instance id for MSTP. |
| 1.3.6.1.4.1.207.8.17.20 | NodeatiStkSwMVRGroup | |||
| 1.3.6.1.4.1.207.8.17.20.1 | NodeatiStkSwMVRConfigTable | |||
| 1.3.6.1.4.1.207.8.17.20.1.1 | ScalaratiStkSwMVRStatus | read-write | current | Set the status for MVR. |
| 1.3.6.1.4.1.207.8.17.20.1.3 | ScalaratiStkSwMVRVlan | read-write | current | Set the group IP address for MVR. |
| 1.3.6.1.4.1.207.8.17.20.2 | TableatiStkSwMVRInterfaceConfigTable | not-accessible | current | This table contains a MVR interface level attributes. |
| 1.3.6.1.4.1.207.8.17.20.2.1 | RowatiStkSwMVRInterfaceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMVRInterfaceConfigTable' that describes the MVR config in switch. |
| 1.3.6.1.4.1.207.8.17.20.2.1.1 | ColumnatiStkSwMVRInterfaceIndex | read-only | current | This object specifies the index for MVR. |
| 1.3.6.1.4.1.207.8.17.20.2.1.2 | ColumnatiStkSwMVRInterfacePortId | read-only | current | This object specifies the port ID for MVR. |
| 1.3.6.1.4.1.207.8.17.20.2.1.3 | ColumnatiStkSwMVRInterfaceType | read-write | current | This object associates the type with port Id for MSTP. |
| 1.3.6.1.4.1.207.8.17.20.3 | TableatiStkSwMVRConfigGroupIpTable | not-accessible | current | This table contains a MVR Group ip attributes. |
| 1.3.6.1.4.1.207.8.17.20.3.1 | RowatiStkSwMVRConfigGroupIpEntry | not-accessible | current | This object specifies an entry in 'atiStkSwMVRConfigGroupIpTable' that describes the MVR config Group ip in switch. |
| 1.3.6.1.4.1.207.8.17.20.3.1.1 | ColumnatiStkSwMVRGroupIpIndex | read-only | current | This object specifies the index for MVR Group ip. |
| 1.3.6.1.4.1.207.8.17.20.3.1.2 | ColumnatiStkSwMVRGroupIp | read-write | current | This object specifies the group ip for MVR. |
| 1.3.6.1.4.1.207.8.17.21 | NodeatiStkSwPSTACKGroup | |||
| 1.3.6.1.4.1.207.8.17.21.1 | NodeatiStkSwPSTACKConfigTable | |||
| 1.3.6.1.4.1.207.8.17.21.1.1 | ScalaratiStkSwPSTACKNoofModules | read-only | current | Set the Number of modules for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.2 | ScalaratiStkSwPSTACKTopology | read-only | current | Set the Topology for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.3 | ScalaratiStkSwPSTACKLclModID | read-only | current | Set the Local Module ID for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.4 | ScalaratiStkSwPSTACKLclMacAdd | read-only | current | Set the Mac Address for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.5 | ScalaratiStkSwPSTACKMasterModId | read-only | current | Set the Master Module ID for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.6 | ScalaratiStkSwPSTACKMasterMacAdd | read-only | current | Set the Master Mac Address for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.7 | ScalaratiStkSwPSTACKSlaveMacAdd1 | read-only | current | Set the Slave Mac Address 1 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.8 | ScalaratiStkSwPSTACKSlaveMacAdd2 | read-only | current | Set the Slave Mac Address 2 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.9 | ScalaratiStkSwPSTACKSlaveMacAdd3 | read-only | current | Set the Slave Mac Address 3 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.10 | ScalaratiStkSwPSTACKSlaveMacAdd4 | read-only | current | Set the Slave Mac Address 4 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.11 | ScalaratiStkSwPSTACKSlaveMacAdd5 | read-only | current | Set the Slave Mac Address 5 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.12 | ScalaratiStkSwPSTACKSlaveMacAdd6 | read-only | current | Set the Slave Mac Address 6 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.1.13 | ScalaratiStkSwPSTACKSlaveMacAdd7 | read-only | current | Set the Slave Mac Address 7 for PStack. |
| 1.3.6.1.4.1.207.8.17.21.2 | TableatiStkSwPSTACKInterfaceConfigTable | not-accessible | current | This table contains a PStack interface level attributes. |
| 1.3.6.1.4.1.207.8.17.21.2.1 | RowatiStkSwPSTACKInterfaceConfigEntry | not-accessible | current | This object specifies an entry in 'atiStkSwPStackInterfaceConfigTable' that describes the PStack config in switch. |
| 1.3.6.1.4.1.207.8.17.21.2.1.1 | ColumnatiStkSwPSTACKInterfaceDeviceId | read-only | current | This object specifies the Device ID for PStack. |
| 1.3.6.1.4.1.207.8.17.21.2.1.2 | ColumnatiStkSwPSTACKInterfaceMacAddress | read-only | current | This object associates the Mac Address with Device Id for PStack. |
| 1.3.6.1.4.1.207.8.17.21.2.1.3 | ColumnatiStkSwPSTACKInterfaceSwVersion | read-only | current | This object associates the Software Version with Device Id for PStack. |
| 1.3.6.1.4.1.207.8.17.21.2.1.4 | ColumnatiStkSwPSTACKInterfaceModel | read-only | current | This object associates the Model type with Device Id for PStack. |
| 1.3.6.1.4.1.207.8.17.21.3 | NodeatiStkSwPSTACKDeviceIDConfigTable | |||
| 1.3.6.1.4.1.207.8.17.21.3.1 | ScalaratiStkSwPSTACKDeviceID | read-write | current | Set the Device ID for PSTACK. |
| 1.3.6.1.4.1.207.8.17.21.4 | NodeatiStkSwPSTACKRebootConfigTable | |||
| 1.3.6.1.4.1.207.8.17.21.4.1 | ScalaratiStkSwPSTACKRebootDeviceID | read-write | current | Set Reboot for PSTACK. |
| 1.3.6.1.4.1.207.8.17.22 | NodeatiStkSwDhcpSvrGroup | |||
| 1.3.6.1.4.1.207.8.17.22.1 | TableatiStkSwDhcpPoolTable | not-accessible | current | This table contains a list of Dhcp Pool. |
| 1.3.6.1.4.1.207.8.17.22.1.1 | RowatiStkSwDhcpPoolEntry | not-accessible | current | This object specifies an entry in 'atiStkSwDhcpPoolTable' that describes a DHCP Pool configured on the switch. |
| 1.3.6.1.4.1.207.8.17.22.1.1.1 | ColumnatiDhcpPoolId | read-only | current | The Pool ID. |
| 1.3.6.1.4.1.207.8.17.22.1.1.2 | ColumnatiDhcpPoolName | read-write | current | The atiDhcpPoolName indicates Pool Name. |
| 1.3.6.1.4.1.207.8.17.22.1.1.3 | ColumnatiDhcpPoolNetwork | read-write | current | Pool Network |
| 1.3.6.1.4.1.207.8.17.22.1.1.4 | ColumnatiDhcpPoolNetmask | read-write | current | atiDhcpPoolNetmask |
| 1.3.6.1.4.1.207.8.17.22.1.1.5 | ColumnatiDhcpPoolSubnetmask | read-write | current | atiDhcpPoolSubnetmask. |
| 1.3.6.1.4.1.207.8.17.22.1.1.6 | ColumnatiDhcpPoolRangeList | read-only | current | Range list of this pool. |
| 1.3.6.1.4.1.207.8.17.22.1.1.7 | ColumnatiDhcpPoolExpireTime | read-write | current | The total expire time |
| 1.3.6.1.4.1.207.8.17.22.1.1.8 | ColumnatiDhcpPoolRouterList | read-only | current | atiDhcpPoolRouterList |
| 1.3.6.1.4.1.207.8.17.22.1.1.9 | ColumnatiDhcpPoolDNSSvrList | read-only | current | atiDhcpPoolDNSSvrList |
| 1.3.6.1.4.1.207.8.17.22.1.1.10 | ColumnatiDhcpPoolDomainName | read-write | current | atiDhcpPoolDomainName |
| 1.3.6.1.4.1.207.8.17.22.1.1.11 | ColumnatiDhcpPoolIpAdd | read-write | current | Ip address to be added to range |
| 1.3.6.1.4.1.207.8.17.22.1.1.12 | ColumnatiDhcpPoolIpDelete | read-write | current | Ip address to be deleted from range |
| 1.3.6.1.4.1.207.8.17.22.1.1.13 | ColumnatiDhcpPoolRouterAdd | read-write | current | The router to be added to router list |
| 1.3.6.1.4.1.207.8.17.22.1.1.14 | ColumnatiDhcpPoolRouterDelete | read-write | current | The router to be deleted from router list |
| 1.3.6.1.4.1.207.8.17.22.1.1.15 | ColumnatiDhcpPoolDNSAdd | read-write | current | The DNS to be added to DNS list |
| 1.3.6.1.4.1.207.8.17.22.1.1.16 | ColumnatiDhcpPoolDNSDelete | read-write | current | The DNS to be deleted from DNS list |
| 1.3.6.1.4.1.207.8.17.22.2 | TableatiStkSwDhcpBindingTable | not-accessible | current | This table contains a list of Dhcp Binding configured on the switch. |
| 1.3.6.1.4.1.207.8.17.22.2.1 | RowatiStkSwDhcpBindingEntry | not-accessible | current | This object specifies an entry in 'atiStkSwDhcpBindingTable' that describes a DHCP Binding configured on the switch. |
| 1.3.6.1.4.1.207.8.17.22.2.1.1 | ColumnatiDhcpBindingId | read-only | current | The atiDhcpBindingId is the Binding Id |
| 1.3.6.1.4.1.207.8.17.22.2.1.2 | ColumnatiDhcpClientMacAddress | read-only | current | The Client Mac Address is the Client Id |
| 1.3.6.1.4.1.207.8.17.22.2.1.3 | ColumnatiDhcpPortNumber | read-only | current | The Port Number indicates which port is offering this ip address. |
| 1.3.6.1.4.1.207.8.17.22.2.1.4 | ColumnatiDhcpIpAddress | read-only | current | switch offers ip address to client |
| 1.3.6.1.4.1.207.8.17.22.2.1.5 | ColumnatiDhcpExpireTime | read-only | current | The ip is valid within this Expire time. |
| 1.3.6.1.4.1.207.8.17.22.3 | NodeatiStkSwDhcpStatisticTable | |||
| 1.3.6.1.4.1.207.8.17.22.3.1 | ScalaratiInDiscover | read-only | current | The atiInDiscover reflects the counter of Dhcp Discover input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.2 | ScalaratiInDhcpRequest | read-only | current | The atiInDhcpDiscover reflects the counter of Dhcp Request input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.3 | ScalaratiInDecline | read-only | current | The atiInDecline reflects the counter of Dhcp Decline input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.4 | ScalaratiInRelease | read-only | current | The atiInRelease reflects the counter of Dhcp Release input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.5 | ScalaratiInInform | read-only | current | The atiInInform reflects the counter of Dhcp Inform input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.6 | ScalaratiInBootRequest | read-only | current | The atiInBootRequest reflects the counter of Dhcp Boot Request input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.7 | ScalaratiInLeaseQuery | read-only | current | The atiInLeaseQuery reflects the counter of Dhcp Lease Query input frames. |
| 1.3.6.1.4.1.207.8.17.22.3.8 | ScalaratiOutDhcpOffer | read-only | current | The atiOutDhcpOffer reflects the counter of Dhcp Offer Output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.9 | ScalaratiOutDhcpAck | read-only | current | The atiOutDhcpAck reflects the counter of Dhcp Ack output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.10 | ScalaratiOutDhcpNak | read-only | current | The atiOutDhcpNak reflects the counter of Dhcp Nak output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.11 | ScalaratiOutLeaseUnknown | read-only | current | The atiOutLeaseUnknow reflects the counter of Dhcp Lease Unknown output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.12 | ScalaratiOutLeaseActive | read-only | current | The atiOutLeaseActive reflects the counter of Dhcp Lease Active output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.13 | ScalaratiOutLeaseUnassigned | read-only | current | The atiOutLeaseUnassigned reflects the counter of Dhcp Lease Unassigned output frames. |
| 1.3.6.1.4.1.207.8.17.22.3.14 | ScalaratiOutBootReply | read-only | current | The atiOutBootReply reflects the counter of Dhcp Boot Reply output frames. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtiStkSwLldpMedCapabilities | BITS { capabilities (0), networkPolicy (1), location (2), extendedPSE (3), extendedPD (4), inventory (5) } | current | Bitmap that includes the MED organizationally defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Each bit in the bitmap corresponds to an L… |
| AtiStkSwLldpMedDeviceClass | INTEGER { notDefined (0), endpointClass1 (1), endpointClass2 (2), endpointClass3 (3), networkConnectivity (4) } | current | Device Class to which the device is a member. A value of notDefined(0) indicates that the device has capabilities not covered by any of the LLDP-MED classes. A value of endpointClass1(1) indicates that the device has en… |
| LocationSubtype | INTEGER { unknown (1), coordinateBased (2), civicAddress (3), elin (4) } | current | The location subtype advertised by the remote endpoint. A value coordinateBased(2) indicates that the location subtype advertised by the endpoint is defined to use the relevant sub- fields of the DHCP option for Coordin… |
| PolicyAppType | BITS { unknown(0), voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softPhoneVoice(5), videoconferencing(6), streamingVideo(7), videoSignaling(8) } | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. Having the bit voice(1) set indicates that the media type defining a primary function of the application for … |