MIB Viewer

Avaya-96xxIPTelephone-MIB

248 objects
MIB Module for 96xx IP Telephones as of Release S3.1 in accordance with 96xx IP RFS 110716, Issue 3.1. Copyright 2009 by Avaya Inc. All rights reserved.
Imported Objects
RFC1213-MIBDisplayString
SNMPv2-SMIenterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.4.1.6889Nodeavaya
1.3.6.1.4.1.6889.1Nodeproducts
1.3.6.1.4.1.6889.1.69NodeavayaipEndpointProd
1.3.6.1.4.1.6889.2NodeavayaMibs
1.3.6.1.4.1.6889.2.69NodeipEndpointMIBs
1.3.6.1.4.1.6889.2.69.2Identityavaya96xxMIBMIB Module for 96xx IP Telephones as of Release S3.1 in accordance with 96xx IP RFS 110716, Issue 3.1. Copyright 2009 by Avaya Inc. All rights reserved.
1.3.6.1.4.1.6889.2.69.2.1NodeendptID
1.3.6.1.4.1.6889.2.69.2.1.1ScalarendptAGCHANDread-onlycurrentHandset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability is currently enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.1.2ScalarendptAGCHEADread-onlycurrentHeadset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability is currently enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.1.3ScalarendptAGCSPKRread-onlycurrentSpeakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability is currently enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.1.4ScalarendptAPPINUSEread-onlycurrentApplication file name. This variable returns the name of the application file in the endpoint.
1.3.6.1.4.1.6889.2.69.2.1.5ScalarendptAPPNAMEread-onlycurrentApplication file ID. This variable returns a string specifying the system-specific application file that should be used for telephone operation.
1.3.6.1.4.1.6889.2.69.2.1.6ScalarendptBAKLIGHTOFFread-onlycurrentBacklight idle timer setting. This variable returns the number of minutes of idle time, after which the telephone backlightis turned off. Range is 0-999, with …
1.3.6.1.4.1.6889.2.69.2.1.7ScalarendptBOOTNAMEread-onlycurrentBoot code file ID. This variable returns a string specifying the boot code file used to initiate telephone operation.
1.3.6.1.4.1.6889.2.69.2.1.8ScalarendptBRURIread-onlycurrentBackup and restore URI. This variable returns a string specifying the URI used for backup and restore files.
1.3.6.1.4.1.6889.2.69.2.1.9ScalarendptCNAPORTread-onlycurrentChatter server port. This variable returns the Chatter server registration transport-layer port number (from 0 to 65535; default is 8888).
1.3.6.1.4.1.6889.2.69.2.1.10ScalarendptCNASRVRread-onlycurrentCNA server addresses. This variable returns zero or more Chatter server addresses for network analysis, in dotted decimal or DNS format.
1.3.6.1.4.1.6889.2.69.2.1.11ScalarendptCODECRread-onlycurrentReceive codec. This variable returns the designation of the Receive codec currently in use.
1.3.6.1.4.1.6889.2.69.2.1.12ScalarendptCODECTread-onlycurrentTransmit codec. This variable returns the designation of the Transmit codec currently in use.
1.3.6.1.4.1.6889.2.69.2.1.13ScalarendptDHCPLEASEREBINDread-onlycurrentRebind time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to rebind the IPADD lease, in seconds as received …
1.3.6.1.4.1.6889.2.69.2.1.14ScalarendptDHCPLEASERENEWread-onlycurrentRenewal time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to renew the IPADD lease, in seconds as received …
1.3.6.1.4.1.6889.2.69.2.1.15ScalarendptDHCPLEASETIMEread-onlycurrentDuration of IPADD lease. This variable returns an unsigned integer specifying the length of time of the IPADD lease, in seconds as received by DHCP option 51.
1.3.6.1.4.1.6889.2.69.2.1.16ScalarendptDNSSRVRread-onlycurrentList of DNS server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of DNS servers available for …
1.3.6.1.4.1.6889.2.69.2.1.17ScalarendptDOMAINread-onlycurrentList of DNS domain labels. This variable returns a sequence of labels, separated by periods, for use as the highest-level domain in resolving DNS names in syst…
1.3.6.1.4.1.6889.2.69.2.1.18ScalarendptDOT1Xread-onlycurrentCurrent value for 802.1X handling. This variable returns 0 if Supplicant operation is Enabled, 1 if Supplicant operation is Enabled with proxy Logoff, and 2 if…
1.3.6.1.4.1.6889.2.69.2.1.19ScalarendptDSCPAUDread-onlycurrentDSCP for audio. This variable specifies the Differentiated Services Code Point for audio currently in use (between 0 and 63 inclusive).
1.3.6.1.4.1.6889.2.69.2.1.20ScalarendptDSCPBBEread-onlycurrentDSCP BBE priority value. This variable returns an integer between 0 and 7 inclusive specifying the far-end endpoint's DiffServ Better than Best Effort audio pr…
1.3.6.1.4.1.6889.2.69.2.1.21ScalarendptDSCPSIGread-onlycurrentDSCP for signaling. This variable specifies the Differentiated Services Code Point for signaling currently in use (between 0 and 63 inclusive).
1.3.6.1.4.1.6889.2.69.2.1.22ScalarendptDSPVERSIONread-onlycurrentDSP Version. This variable returns a string of up to 10 characters, that identifies the version of the DSP firmware in the endpoint.
1.3.6.1.4.1.6889.2.69.2.1.23ScalarendptFEIPADDread-onlycurrentAudio endpoint address. This variable returns a 4-octet string specifying the address of the far-end audio endpoint currently in use.
1.3.6.1.4.1.6889.2.69.2.1.24ScalarendptFEPORTread-onlycurrentAudio endpoint port number. This variable returns the far-end endpoint's transport layer port number for audio, currently in use.
1.3.6.1.4.1.6889.2.69.2.1.25ScalarendptGIPADDread-onlycurrentList of router addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of routers available for use.
1.3.6.1.4.1.6889.2.69.2.1.26ScalarendptGIPINUSEread-onlycurrentRouter address. This variable returns a 4-octet string specifying the IP address of the router currently in use.
1.3.6.1.4.1.6889.2.69.2.1.27ScalarendptGROUPread-onlycurrentGroup identifier. This variable returns the integer corresponding to the current group identifier.
1.3.6.1.4.1.6889.2.69.2.1.28ScalarendptHTTPDIRread-onlycurrentHTTP server Directory. This variable returns the path used in formation of the URI for HTTP GET operations.
1.3.6.1.4.1.6889.2.69.2.1.29ScalarendptHTTPSRVRread-onlycurrentHTTP server IP addresses. This variable returns a comma-separated list of HTTP server IP addresses available for use, in dotted-decimal or DNS format.
1.3.6.1.4.1.6889.2.69.2.1.30ScalarendptHTTPUSEDread-onlycurrentHTTP initialization server IP address. This variable returns a 4-octet IP address for the HTTP server used during initialization (all zeroes if no server succe…
1.3.6.1.4.1.6889.2.69.2.1.31ScalarendptICMPDUread-onlycurrentCurrent value for ICMP Destination message handling. This variable returns 0 if the telephone does not transmit ICMP Destination Unreachable messages are not t…
1.3.6.1.4.1.6889.2.69.2.1.32ScalarendptICMPREDread-onlycurrentCurrent value for ICMP Redirect message handling. This variable returns 1 if received Redict messages are handled as specified in RFC 1122, Sections 3.2.2.2 an…
1.3.6.1.4.1.6889.2.69.2.1.33ScalarendptIPADDread-onlycurrentEndpoint IP address. This variable returns a 4-octet string specifying the endpoint's current IP address.
1.3.6.1.4.1.6889.2.69.2.1.34ScalarendptJMSECread-onlycurrentJitter buffer size. This variable returns the number of milliseconds of delay added to compensate for network jitter, from 0-300 milliseconds. The default is 1…
1.3.6.1.4.1.6889.2.69.2.1.35ScalarendptL2Qread-onlycurrent802.1Q framing flag. This variable returns 0 if the Layer 2 802.1Q framing parameter is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled.
1.3.6.1.4.1.6889.2.69.2.1.36ScalarendptL2QAUDread-onlycurrentAudio priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q audio priority value.
1.3.6.1.4.1.6889.2.69.2.1.37ScalarendptL2QSIGread-onlycurrentSignaling priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q signaling priority value.
1.3.6.1.4.1.6889.2.69.2.1.38ScalarendptL2QSTATread-onlycurrent802.1Q tagging flag. This variable returns 0 if the Layer 2 802.1Q tagging parameter is currently OFF, else 1.
1.3.6.1.4.1.6889.2.69.2.1.39ScalarendptL2QVLANread-onlycurrentAdministered Telephone VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the administered Layer 2 802.1Q VLAN Identifie…
1.3.6.1.4.1.6889.2.69.2.1.40ScalarendptL2QVLANINUSEread-onlycurrentTelephone VLAN Identifier in use. This variable returns an integer between 0 and 4094 inclusive specifying the current Layer 2 802.1Q VLAN Identifier value.
1.3.6.1.4.1.6889.2.69.2.1.41ScalarendptLOGSRVRread-onlycurrentEvent Log server address. This variable returns at most one IP address, in dotted-decimal or DNS format, of the server to be used for event logging. This funct…
1.3.6.1.4.1.6889.2.69.2.1.42ScalarendptMACADDRread-onlycurrentMAC address. This variable returns a 6-octet string specifying the endpoint's MAC address.
1.3.6.1.4.1.6889.2.69.2.1.43ScalarendptMODELread-onlycurrentModel identifier. This variable returns a string of up to 8 ASCII characters.
1.3.6.1.4.1.6889.2.69.2.1.44ScalarendptNETMASKread-onlycurrentSubnet mask. This variable returns a 4-octet string specifying the subnet mask currently in use.
1.3.6.1.4.1.6889.2.69.2.1.45ScalarendptPHONECCread-onlycurrentPhone comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode of the endpoint itself.
1.3.6.1.4.1.6889.2.69.2.1.46ScalarendptPHONESNread-onlycurrentHousing serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the outside of the endpoint's housing.
1.3.6.1.4.1.6889.2.69.2.1.47ScalarendptPHY1DUPLEXread-onlycurrentEthernet line interface duplex setting. This variable returns 1 if the interface is half-duplex and 2 if the interface is full duplex.
1.3.6.1.4.1.6889.2.69.2.1.48ScalarendptPHY1SPEEDread-onlycurrentEthernet interface speed. This variable returns a string specifying the endpoint's Ethernet interface speed in Mbps: '100' or '10'.
1.3.6.1.4.1.6889.2.69.2.1.49ScalarendptPHY1STATread-onlycurrentEthernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface is currently NOT enabled, 1 if the Ethernet line interface is…
1.3.6.1.4.1.6889.2.69.2.1.50ScalarendptPHY2DUPLEXread-onlycurrentSecondary Ethernet interface duplex setting. This variable returns 0 if no link is established, 1 if the interface is half-duplex,and 2 if the interface is ful…
1.3.6.1.4.1.6889.2.69.2.1.51ScalarendptPHY2PRIOread-onlycurrentSecondary Ethernet interface Layer 2 priority. This variable returns 0 through 7, and is used with endptVLANSEP. The default is 0.
1.3.6.1.4.1.6889.2.69.2.1.52ScalarendptPHY2SPEEDread-onlycurrentSecondary Ethernet speed. This variable returns a string specifying the endpoint's Ethernet interface speed in Mbps: '100' or '10' or '0'.
1.3.6.1.4.1.6889.2.69.2.1.53ScalarendptPHY2STATread-onlycurrentSecondary Ethernet interface status. This variable returns 0 if the endpoint's Secondary Ethernet interface is currently NOT enabled, 1 if the Secondary Ethern…
1.3.6.1.4.1.6889.2.69.2.1.54ScalarendptPHY2VLANread-onlycurrentSecondary Ethernet interface VLAN ID. This variable returns an integer between 0 and 4094 inclusive specifying the current Layer 2 802.1Q VLAN Identifier value…
1.3.6.1.4.1.6889.2.69.2.1.55ScalarendptPORTAUDread-onlycurrentTransport-layer audio port. This variable returns the endpoint's transport layer port number for audio, currently in use.
1.3.6.1.4.1.6889.2.69.2.1.56ScalarendptPROCPSWDread-onlycurrentLocal Procedure Password. This variable returns 0 if the Local Procedure Password is null, else 1.
1.3.6.1.4.1.6889.2.69.2.1.57ScalarendptPROCSTATread-onlycurrentLocal Procedure flag. This variable returns 0 if Local Procedures are currently allowed for this telephone, else 1.
1.3.6.1.4.1.6889.2.69.2.1.58ScalarendptPWBCCread-onlycurrentPWB comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode or version number of the printed wiring board of the endpoi…
1.3.6.1.4.1.6889.2.69.2.1.59ScalarendptPWBSNread-onlycurrentPWB serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the endpoint's printed wiring board, or N/A if …
1.3.6.1.4.1.6889.2.69.2.1.60ScalarendptRTCPCONTread-onlycurrentRTCP Control flag. This variable returns 0 if the RTCP control status is off/disabled, else 1.
1.3.6.1.4.1.6889.2.69.2.1.61ScalarendptRTCPFLOWread-onlycurrentRTCP Flowrate. This variable returns an integer between 5 and 30 inclusive specifying the RTCP flowrate in milliseconds.
1.3.6.1.4.1.6889.2.69.2.1.62ScalarendptRTCPMONread-onlycurrentRTCP Monitor address. This variable returns a 4-octet string specifying the IP address of the RTCP monitor currently in use.
1.3.6.1.4.1.6889.2.69.2.1.63ScalarendptRSVPCONTread-onlycurrentRSVP Control flag. This variable returns 0 if the RSVP control status is off/disabled, else 1.
1.3.6.1.4.1.6889.2.69.2.1.64ScalarendptRSVPRFRSHread-onlycurrentRSVP Refresh rate. This variable returns an integer between 1 and 3600 inclusive specifying the RSVP refresh rate in milliseconds.
1.3.6.1.4.1.6889.2.69.2.1.65ScalarendptRSVPRTRYread-onlycurrentRSVP Failed Retry flag. This variable returns 0 if the RSVP Failed Retry Reservation control status is off/disabled, else 1.
1.3.6.1.4.1.6889.2.69.2.1.66ScalarendptRSVPPROFread-onlycurrentRSVP profile flag. This variable returns 0 if the RSVP profile is guaranteed, else 1 for controlled load.
1.3.6.1.4.1.6889.2.69.2.1.67ScalarendptSIGread-onlycurrentSignaling protocol download flag. This variable returns the integer corresponding to the current signaling protocol.
1.3.6.1.4.1.6889.2.69.2.1.68ScalarendptSNMPADDread-onlycurrentSNMP source addresses. This variable returns one or more allowable source IP addresses for SNMP queries, in dotted decimal or DNS format.
1.3.6.1.4.1.6889.2.69.2.1.69ScalarendptSTATICread-onlycurrentStatic programming override flag. This variable returns the integer corresponding to the current level of override permissions for static programming.
1.3.6.1.4.1.6889.2.69.2.1.70ScalarendptTLSSRVRread-onlycurrentTLS server addresses. This variable returns zero or more Transport Layer Security server addresses for software download, in dotted decimal or DNS format.
1.3.6.1.4.1.6889.2.69.2.1.71ScalarendptTLSUSEDread-onlycurrentTLS server address used. This variable returns the TLS server address from TLSSRVR used, if any, during initialization, or all zeroes if no TLS server was used.
1.3.6.1.4.1.6889.2.69.2.1.72ScalarendptTMSECread-onlycurrentTransmit buffer fill level. This variable returns the transmit buffer minimum fill level, in msec, currently in use.
1.3.6.1.4.1.6889.2.69.2.1.73ScalarendptVLANLISTread-onlycurrentVLAN ID list. This variable returns a list of zero or more VLAN IDs.
1.3.6.1.4.1.6889.2.69.2.1.74ScalarendptVLANSEPread-onlycurrentVLAN separation value. This variable returns 0 if frames received on the secondary Ethernet interface are unchanged before forwarding; else 1, which is the def…
1.3.6.1.4.1.6889.2.69.2.1.75ScalarendptFONTread-onlycurrentFont file identifier. This variable returns a text string with the name of the font file stored in the phone, if any.
1.3.6.1.4.1.6889.2.69.2.1.76ScalarendptLANGFILESread-onlycurrentLanguage file list. This variable returns a comma-separated text string listing the language files stored in the phone, if any.
1.3.6.1.4.1.6889.2.69.2.1.77ScalarendptPHNEMERGNUMread-onlycurrentEmergency Number. This variable returns a telephone number to be dialed when an Emergency softkey is pressed.
1.3.6.1.4.1.6889.2.69.2.1.78ScalarendptAUDIOENVread-onlycurrentAudio Environment parameter. This variable returns the current value of AUDIOENV.
1.3.6.1.4.1.6889.2.69.2.1.79ScalarendptAUDIOSTHDread-onlycurrentAudio Handset Sidetone parameter. This variable returns the current value of AUDIOSTHD.
1.3.6.1.4.1.6889.2.69.2.1.80ScalarendptAUDIOSTHSread-onlycurrentAudio Headset Sidetone parameter. This variable returns the current value of AUDIOSTHS.
1.3.6.1.4.1.6889.2.69.2.1.81ScalarendptBRAUTHread-onlycurrentBackup/Restore authentication control. This variable returns 0 if the call server IP address and telephone's registration password is NOT not included as crede…
1.3.6.1.4.1.6889.2.69.2.1.82ScalarendptDHCPINUSEread-onlycurrentIP address of DHCP server from which phone's IP address was obtained. This variable returns four zeroes by default or when the telephone is manually programmed.
1.3.6.1.4.1.6889.2.69.2.1.83ScalarendptDHCPLEASEEXPread-onlycurrentDHCP lease expiration. This variable returns the time (in seconds) remaining until the expiration of the current DHCP lease; or 0 if the lease has expired.
1.3.6.1.4.1.6889.2.69.2.1.84ScalarendptDHCPSTDread-onlycurrentDHCP compliance flag. This variable returns 0 (the default) if the telephone ignores the DHCP standard and continues using its IP address after its lease has e…
1.3.6.1.4.1.6889.2.69.2.1.85ScalarendptDHCPT1REMread-onlycurrentDHCP lease renewal expiration. This variable returns the time (in seconds) until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if th…
1.3.6.1.4.1.6889.2.69.2.1.86ScalarendptDHCPT2REMread-onlycurrentDHCP lease rebinding expiration. This variable returns the time (in seconds) remaining until the start of IP address lease renewal, -1 if the lease is infinite…
1.3.6.1.4.1.6889.2.69.2.1.87ScalarendptDOT1XSTATread-onlycurrent802.1X Supplicant status. This variable returns 0 if 802.1X Supplicant mode is Disabled; 1 (the default) if the supplicant mode is set to Unicast-only, and 2 i…
1.3.6.1.4.1.6889.2.69.2.1.88ScalarendptHTTPPORTread-onlycurrentHTTP port number. This variable returns the TCP port number used for HTTP file downloading.
1.3.6.1.4.1.6889.2.69.2.1.89ScalarendptTLSDIRread-onlycurrentTLS Server Directory. This variable returns the path that is prepended to all file names used in HTTPS GET operations.
1.3.6.1.4.1.6889.2.69.2.1.90ScalarendptTLSPORTread-onlycurrentTLS server port number. This variable returns the TCP port number used for HTTPS file downloading.
1.3.6.1.4.1.6889.2.69.2.1.91ScalarendptMEMHEAPFREEread-onlycurrentHeap allocation. This variable returns the number of bytes of volatile memory currently allocated for, but unused by, the Heap.
1.3.6.1.4.1.6889.2.69.2.1.92ScalarendptSSONCONTENTread-onlycurrentSSON Content. This variable returns the data portion of the DHCP site-specific option designated by NVSSON, exactly as received.
1.3.6.1.4.1.6889.2.69.2.1.93ScalarendptTLSSRVRIDread-onlycurrentTLS server ID flag. This variable returns 1 if the TLS server identity is to be checked against its certificate, otherwise 0.
1.3.6.1.4.1.6889.2.69.2.1.94ScalarendptTRUSTCERTSread-onlycurrentTrusted Certificates list. This variable returns the current trusted certificates to be downloaded; 0-255 ASCII characters, 0 or more filenames or URLs separat…
1.3.6.1.4.1.6889.2.69.2.1.95ScalarendptVOXFILESread-onlycurrentVoice language files list. This variable returns the current list of voice langauge files to be downloaded; 0-255 ASCII characters, 0 or more filenames separat…
1.3.6.1.4.1.6889.2.69.2.1.96ScalarendptGRATARPread-onlycurrentGratuitous ARP flag. This variable returns 1 oif gratuitous ARP messages are to be process; else 0.
1.3.6.1.4.1.6889.2.69.2.2NodeendptNVM
1.3.6.1.4.1.6889.2.69.2.2.1ScalarendptNVAGCHANDread-onlycurrentNon-Volatile Memory (NVM)Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability in NVM is currently enabled, e…
1.3.6.1.4.1.6889.2.69.2.2.2ScalarendptNVAGCHEADread-onlycurrentNVM Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability in NVM is currently enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.2.3ScalarendptNVAGCSPKRread-onlycurrentSpeakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability in NVM is currently enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.2.4ScalarendptNVALERTread-onlyobsoleteAlerting Mode flag. This variable returns 1 if the alerting mode setting in non-volatile memory is enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.2.5ScalarendptNVAUTHread-onlycurrentScript file authentication flag. This variable returns 1 if the endpoint must authenticate script files, else 0.
1.3.6.1.4.1.6889.2.69.2.2.6ScalarendptNVBRIGHTNESSread-onlycurrentDisplay Brightness setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-5, with 4 the default.
1.3.6.1.4.1.6889.2.69.2.2.7ScalarendptNVCALLSRVRread-onlyobsoleteNVM IP address of call server if manually entered. Default is four zeroes.
1.3.6.1.4.1.6889.2.69.2.2.8ScalarendptNVCHADDRread-onlycurrentManually-entered DHCP chaddr value. This variable returns a manually-entered value for the DHCP chaddr field as stored in non-volatile memory, if any. A Hexade…
1.3.6.1.4.1.6889.2.69.2.2.9ScalarendptNVCONTRASTread-onlycurrentDisplay Contrast setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-15, with 8 the default.
1.3.6.1.4.1.6889.2.69.2.2.10ScalarendptNVFILESRVRread-onlyobsoleteNVM File server address. This variable returns a 4-octet string specifying the IP address of the file server as stored in NVM.
1.3.6.1.4.1.6889.2.69.2.2.11ScalarendptNVGIPADDread-onlycurrentNVM Router address. This variable returns a 4- octet string specifying the IP address of the router as stored in NVM.
1.3.6.1.4.1.6889.2.69.2.2.12ScalarendptNVIPADDread-onlycurrentNVM IP address. This variable returns a 4-octet string specifying the endpoint's IP address stored in NVM.
1.3.6.1.4.1.6889.2.69.2.2.13ScalarendptNVL2Qread-onlycurrentNVM 802.1Q flag. This variable returns 0 if the Layer 2 802.1Q framing parameter in NVM is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled.
1.3.6.1.4.1.6889.2.69.2.2.14ScalarendptNVL2QVLANread-onlycurrentNVM VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the Layer 2 802.1Q VLAN Identifier value stored in NVM.
1.3.6.1.4.1.6889.2.69.2.2.15ScalarendptNVLOGSTATread-onlycurrentNVM Event Log flag. This variable returns 0 if the endpoint's event logging capability in NVM is currently NOT enabled, else 1.
1.3.6.1.4.1.6889.2.69.2.2.16ScalarendptNVNETMASKread-onlycurrentNVM Subnet mask. This variable returns a 4-octet string specifying the subnet mask as stored in NVM.
1.3.6.1.4.1.6889.2.69.2.2.17ScalarendptNVPHY1STATread-onlycurrentNVM Ethernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface in NVM iscurrently NOT enabled, 1 if the Ethernet line in…
1.3.6.1.4.1.6889.2.69.2.2.18ScalarendptNVPHY2STATread-onlycurrentNVM Secondary Ethernet interface setting. This variable returns 0 if the endpoint's secondary Ethernet interface in NVM is currently NOT enabled(or none exists…
1.3.6.1.4.1.6889.2.69.2.2.19ScalarendptNVSSONread-onlycurrentNVM Site-specific option number. This variable returns an integer between 128 and 254 inclusive, specifying the SSON stored in NVM. The default is 176.
1.3.6.1.4.1.6889.2.69.2.2.20ScalarendptNVVLANTESTread-onlycurrentNVM VLAN pause parameter. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLA…
1.3.6.1.4.1.6889.2.69.2.2.21ScalarendptNVLANGFILEread-onlycurrentLanguage file. This variable returns the name of the language file in non-volatile memory.
1.3.6.1.4.1.6889.2.69.2.2.22ScalarendptNVTRUSTLISTread-onlycurrentList of trusted certificates. This variable returns 0-255 ASCII characters: 0 or more filenames or URLs separated by commas and without intervening spaces, con…
1.3.6.1.4.1.6889.2.69.2.2.23ScalarendptNVVOXFILEread-onlycurrentVoice language file. This variable returns 0-32 ASCII characters: 0 or 1filename, identifying the voice language file, if any, in non-volatile memory.
1.3.6.1.4.1.6889.2.69.2.2.24ScalarendptNVRINGTONESTYLEread-onlycurrentRinging style identifier. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLA…
1.3.6.1.4.1.6889.2.69.2.2.25ScalarendptNVSBM24BRIGHTNESS1read-onlycurrentSBM24 backlight level. This variable returns the value of the backlight brightness for the first SBM24 attached, to the telephone, if any. Valid values are int…
1.3.6.1.4.1.6889.2.69.2.2.26ScalarendptNVSBM24BRIGHTNESS2read-onlycurrentSBM24 backlight level. This variable returns the value of the backlight brightness for the second SBM24 attached, to the telephone, if any. Valid values are in…
1.3.6.1.4.1.6889.2.69.2.2.27ScalarendptNVSBM24BRIGHTNESS3read-onlycurrentSBM24 backlight level. This variable returns the value of the backlight brightness for the third SBM24 attached, to the telephone, if any. Valid values are int…
1.3.6.1.4.1.6889.2.69.2.3NodeendptMaintenance
1.3.6.1.4.1.6889.2.69.2.3.1ScalarendptAPPSTATread-onlycurrentApplication download flag. This variable returns '0' if the most recent attempt to download and store an application file was successful. This variable returns…
1.3.6.1.4.1.6889.2.69.2.3.2ScalarendptUPGRADESTATread-onlycurrentScript loading status flag. This variable returns '0' if a 96xxupgrade.txt file was successfully obtained and interpreted since the last power-up or reset. Thi…
1.3.6.1.4.1.6889.2.69.2.3.3TableendptRecentLognot-accessiblecurrentEach entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entr…
1.3.6.1.4.1.6889.2.69.2.3.3.1RowendptRecentLogEntrynot-accessiblecurrentEach entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entr…
1.3.6.1.4.1.6889.2.69.2.3.3.1.1ColumnendptRecentLogTextread-onlycurrentSyslog event message.
1.3.6.1.4.1.6889.2.69.2.3.4TableendptResetLognot-accessiblecurrentEach entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL.…
1.3.6.1.4.1.6889.2.69.2.3.4.1RowendptResetLogEntrynot-accessiblecurrentEach entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL.…
1.3.6.1.4.1.6889.2.69.2.3.4.1.1ColumnendptResetLogTextread-onlycurrentSyslog event message.
1.3.6.1.4.1.6889.2.69.2.4NodeendptApps
1.3.6.1.4.1.6889.2.69.2.4.1ScalarendptAUDIOPATHread-onlycurrentUser audio path. This variable returns 0 if the telephone does not support a 2-way speaker or does not have a headset jack; 1 if the user audio path is with th…
1.3.6.1.4.1.6889.2.69.2.4.2ScalarendptENHDIALSTATread-onlycurrentEnhanced Local Dialing status. This variable returns 0 if the Enhanced Local Dialing status is off/disabled, else 1.
1.3.6.1.4.1.6889.2.69.2.4.3ScalarendptSUBSCRIBELISTread-onlycurrent96xx Web push subscription list. This variable returns a string containing one or more fully qualified URLs to which the phone's Browser application subscribes…
1.3.6.1.4.1.6889.2.69.2.4.4ScalarendptTPSLISTread-onlycurrent96xxWeb Trusted Push Server list. This variable returns a string containing one or more domains and paths in DNS format, used to determine for validation of pu…
1.3.6.1.4.1.6889.2.69.2.4.5ScalarendptWMLEXCEPTread-onlycurrent96xx Web Proxy Server Exception List. This variable returns a string specifying a list of one or more HTTP proxy server Exception domains, separated by commas …
1.3.6.1.4.1.6889.2.69.2.4.6ScalarendptWMLHOMEread-onlycurrent96xx Web application URL. This variable returns a URL of the Home page for the 96xx Browser application.
1.3.6.1.4.1.6889.2.69.2.4.7ScalarendptWMLIDLETIMEread-onlycurrentWeb Idle Timer. This variable returns the number of minutes, from 1 to 60 inclusive, of idle activity on the telephone before the Web Idle Timer URI is display…
1.3.6.1.4.1.6889.2.69.2.4.8ScalarendptWMLIDLEURIread-onlycurrentWeb Idle Timer URI. This variable returns the URI of the WML page displayed after the 96xxWeb Idle Timer expires.
1.3.6.1.4.1.6889.2.69.2.4.9ScalarendptWMLPORTread-onlycurrent96xx Browser application TCP port. This variable returns an integer specifying the TCP port most recently used for the HTTP proxy server. Used by the 96xx Brow…
1.3.6.1.4.1.6889.2.69.2.4.10ScalarendptWMLPROXYread-onlycurrent96xx Web Proxy Server. This variable returns an IP addresses, in dotted-decimal or DNS format, of an HTTP proxy server. Used by the 96xx Browser application.
1.3.6.1.4.1.6889.2.69.2.4.11ScalarendptGUESTDURATIONread-onlycurrent96xx Guest Login Duration. This variable returns an integer specifying the number of hours from 1-12 for the Guest Login duration. The default is 2.
1.3.6.1.4.1.6889.2.69.2.4.12ScalarendptGUESTLOGINSTATread-onlycurrent96xx Guest Login permission flag. This variable returns 1 if the user is allowed to initiate a Guest Login, otherwise 0.
1.3.6.1.4.1.6889.2.69.2.4.13ScalarendptGUESTWARNINGread-onlycurrent96xx Guest Login Warning interval. This variable returns an integer specifying the number of minutes from 1-15 before the expiration of a Guest Login that a wa…
1.3.6.1.4.1.6889.2.69.2.4.14ScalarendptPUSHCAPread-onlycurrentPush capabilities. This variable returns a 4-digit integer specifying the phone administration for audio transmit, audi receive, display (web), and Top Line pu…
1.3.6.1.4.1.6889.2.69.2.4.15ScalarendptPUSHPORTread-onlycurrentPush listening port. This variable returns an integer specifying the TCP listening port most recently used for the HTTP server..
1.3.6.1.4.1.6889.2.69.2.4.16ScalarendptQKLOGINSTATread-onlycurrentQuick Login permission flag. This variable returns 1 (the default) if users are permitted to use the # button to use a previous login and password during regis…
1.3.6.1.4.1.6889.2.69.2.4.17ScalarendptSCREENSAVERread-onlycurrentCustom screen saver URL. This variable returns a filename from 0-32 characters that specifies an image displayed in lieu of the Avaya screen saver.
1.3.6.1.4.1.6889.2.69.2.4.18ScalarendptWMLSMALLread-onlycurrent9610 Web application URL. This variable returns a URL of the Home page for the 9610 Browser application.
1.3.6.1.4.1.6889.2.69.2.4.19ScalarendptCLDELCALLBKread-onlycurrentCall Log Callback Deletion flag. This variable returns 1 if a Missed Call Log entry is deleted from the Call Log if the user Calls that entry from the Call Log…
1.3.6.1.4.1.6889.2.69.2.4.20ScalarendptFBONCASCREENread-onlycurrentFeature Buttons on Call Appearance List flag. This variable returns 1 if administered feature buttons are allowed to be listed on the Call Appearance Screen, e…
1.3.6.1.4.1.6889.2.69.2.4.21ScalarendptLOGBACKUPread-onlycurrentCall Log backup permission flag. This variable returns 1 (the default) if the telephone is to automatically store and retrieve a file of Call Log entries, else…
1.3.6.1.4.1.6889.2.69.2.4.22ScalarendptLOGMISSEDONCEread-onlycurrentMissed Call Log Counter flag. This variable returns 1 if the telephone keeps only one Missed Call Log record for a given Name and Number, as well as a counter …
1.3.6.1.4.1.6889.2.69.2.4.23ScalarendptLOGUNSEENread-onlycurrentLog redirected calls permission flag. This variable returns 1 if the telephone is to create Call Log entries for calls that are redirected from the physical te…
1.3.6.1.4.1.6889.2.69.2.4.24ScalarendptAPPSTATVALUEread-onlycurrentApplications permission status. This variable returns the current value of the APPSTAT parameter, which can restrict the availability of some of the telephone …
1.3.6.1.4.1.6889.2.69.2.4.25ScalarendptOPSTATread-onlycurrentOptions permission status. This variable returns the current value of the OPSTAT parameter, which can restrict the availability of some of the telephone option…
1.3.6.1.4.1.6889.2.69.2.4.26ScalarendptOPSTAT2read-onlycurrentOptions permission override parameter. This variable returns the current value of the OPSTAT2 parameter, which can override specific functionality of the OPSTA…
1.3.6.1.4.1.6889.2.69.2.5NodeendptAdjuncts
1.3.6.1.4.1.6889.2.69.2.5.1ScalarendptBMODSread-onlycurrentButton Module interface usage. This variable returns the number of devicess attached (or daisy-chained) to the endpoint through the button module interface.
1.3.6.1.4.1.6889.2.69.2.5.2ScalarendptBTADHWVERread-onlycurrentBluetooth adapter hardware version. This variable returns the hardware version of an attached Bluetooth Adapter, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.3ScalarendptBTADSTATread-onlycurrentBluetooth adapter presence. This variable returns 1 if the presence. of a Bluetooth adapter is detected, else 0.
1.3.6.1.4.1.6889.2.69.2.5.4ScalarendptBTADSWVERread-onlycurrentBluetooth adapter software version. This variable returns the software version of an attached Bluetooth Adapter, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.5ScalarendptGIGEHWVERread-onlycurrentGigE adapter hardware version. This variable returns the hardware version of an attached GigE Adapter, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.6ScalarendptGIGESTATread-onlycurrentGigE adapter presence. This variable returns 1 if the presence. of a GigE adapter is detected, else 0.
1.3.6.1.4.1.6889.2.69.2.5.7ScalarendptGIGESWVERread-onlycurrentGigE adapter software version. This variable returns the software version of an attached GigE Adapter, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.8ScalarendptSBM1HWVERread-onlycurrentSBM #1 hardware version. This variable returns the hardware version of the first button module, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.9ScalarendptSBM1SWVERread-onlycurrentSBM #1 software version. This variable returns the software version of the first button module, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.10ScalarendptSBM2HWVERread-onlycurrentSBM #2 hardware version. This variable returns the hardware version of the second button module, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.11ScalarendptSBM2SWVERread-onlycurrentSBM #2 software version. This variable returns the software version of the second button module, if any.
1.3.6.1.4.1.6889.2.69.2.5.12ScalarendptSBM3HWVERread-onlycurrentSBM #3 hardware version. This variable returns the hardware version of the third button module, if any. If none, null is returned.
1.3.6.1.4.1.6889.2.69.2.5.13ScalarendptSBM3SWVERread-onlycurrentSBM #3 software version. This variable returns the software version of the third button module, if any.
1.3.6.1.4.1.6889.2.69.2.5.14ScalarendptSBMSTATread-onlycurrentButton Modules attached. This variable returns the number of Button Modules attached (or daisy-chained) to the endpoint.
1.3.6.1.4.1.6889.2.69.2.5.15ScalarendptUSBPOWERread-onlycurrentUSB Power Provision. This variable returns 0 if the telephone is to disable USB power, 1 if USB power is enabled only if the telephone is Aux powered, 2 if USB…
1.3.6.1.4.1.6889.2.69.2.6NodeendptH323
1.3.6.1.4.1.6889.2.69.2.6.1ScalarendptMCIPADDread-onlycurrentList of call server addresses. This variable returns a sequence of IP addresses, in dotted-decimal or DNS format and separated by commas, of call server IP add…
1.3.6.1.4.1.6889.2.69.2.6.2ScalarendptGKINUSEread-onlycurrentGatekeeper in use address. This variable returns a 4-octet string specifying the IP address of the gatekeeper currently in use.
1.3.6.1.4.1.6889.2.69.2.6.3ScalarendptNVPHONEXTread-onlycurrentEndpoint's phone extension. This variable returns a text string identifying the endpoint's extension, in free text format. The default value is NULL.
1.3.6.1.4.1.6889.2.69.2.6.4TableendptRASGkListnot-accessiblecurrentEach entry is one of up to 75 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the or…
1.3.6.1.4.1.6889.2.69.2.6.4.1RowendptRASGkEntrynot-accessiblecurrentEach entry is one of up to 75 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the or…
1.3.6.1.4.1.6889.2.69.2.6.4.1.1ColumnendptRASGkEntryDataread-onlycurrentData for an individual RAS-provided Gatekeeper.
1.3.6.1.4.1.6889.2.69.2.6.5ScalarendptREREGISTERread-onlycurrentReregistration Timer value. This variable returns the number of minutes from 1 to 120 inclusive the telephone waits between re-registration attempts if unnamed…
1.3.6.1.4.1.6889.2.69.2.6.6ScalarendptSERVICESTATread-onlycurrentStatus of phone in service. This variable returns 0 if the phone is not in service nor is attempting to register, 1 if the telephone has failed Gatekeeper Disc…
1.3.6.1.4.1.6889.2.69.2.6.7ScalarendptGKTCPPORTread-onlycurrentGatekeeper Port. This variable returns 0 if the telephone is not currently registered, otherwise it returns the TCP port number on the gatekeeper with which th…
1.3.6.1.4.1.6889.2.69.2.8NodeendptCERT
1.3.6.1.4.1.6889.2.69.2.8.1ScalarendptMYCERTCAIDread-onlycurrentCertificate Authority ID. This variable returns the Certificate Authority Identifier to be used in a certificate request.
1.3.6.1.4.1.6889.2.69.2.8.2ScalarendptMYCERTCNread-onlycurrentCertificate Common Name. This variable returns the Common Name of the Subject of a certificate request.
1.3.6.1.4.1.6889.2.69.2.8.3ScalarendptMYCERTDNread-onlycurrentCertificate Distinguished Name. This variable returns additional information (sometimes common country and organizational information) that, together with the …
1.3.6.1.4.1.6889.2.69.2.8.4ScalarendptMYCERTKEYLENread-onlycurrentKey length. This variable returns the bit length of the public and private keys generated for a certificate request
1.3.6.1.4.1.6889.2.69.2.8.5ScalarendptMYCERTRENEWread-onlycurrentCertificate Renewal interval. This variable returns the percentage of a certificate Validity interval after which renewal procedures will be initiated.
1.3.6.1.4.1.6889.2.69.2.8.6ScalarendptMYCERTURLread-onlycurrentSCEP URL. This variable returns the URL to be used to contact an SCEP server.
1.3.6.1.4.1.6889.2.69.2.8.7ScalarendptMYCERTWAITread-onlycurrentCertificate wait flag. This variable returns 0 if the telephone will wait until a pending certificate request is complete, else 1 if it will periodically check…
1.3.6.1.4.1.6889.2.69.2.9NodeendptVPN
1.3.6.1.4.1.6889.2.69.2.9.1ScalarendptALWCLRNOTIFYread-onlycurrentISAKP Notification flag. This variable returns 1 if unencrypted ISAKMP Notification Payloads will be accepted, else 0.
1.3.6.1.4.1.6889.2.69.2.9.2ScalarendptAUTHTYPEread-onlycurrentVPN Authentication Method. This variable returns 3 if the VPN authentication method is Pre-Shared Key (PSK); 4 if the method is PSK with XAUTH, 5 if the method…
1.3.6.1.4.1.6889.2.69.2.9.3ScalarendptCFGPROFread-onlycurrentVPN Configuration Profile. This variable returns 2 if the VPN Configuration Profile is based on Checkpoint Security Gateway, 3 if the profile is based on Cisco…
1.3.6.1.4.1.6889.2.69.2.9.4ScalarendptCOPYTOSread-onlycurrentTOS Copy flag. This variable returns 1 if the value of the TOS bits will be copied from the inner IP header to the outer IP header, else this variable returns …
1.3.6.1.4.1.6889.2.69.2.9.5ScalarendptDHCPSRVRread-onlycurrentList of DHCP server addresses. This variable returns a sequence of zero or more IP addresses, in dotted-decimal format and separated by commas, of enterprise D…
1.3.6.1.4.1.6889.2.69.2.9.6ScalarendptDROPCLEARread-onlycurrentClear IPSec packet treatment. This variable returns 1 if received unencrypted (clear) IPsec packets are to be dropped, else 0
1.3.6.1.4.1.6889.2.69.2.9.7ScalarendptENCAPSread-onlycurrentEncapsulation Port Numbers. This variable returns 0 if negotiation of NAT traversal is as specified in IETF RFC 3947 (except that IKE negotiation begins with a…
1.3.6.1.4.1.6889.2.69.2.9.8ScalarendptEXTDNSSRVRread-onlycurrentList of external DNS server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of DNS servers avail…
1.3.6.1.4.1.6889.2.69.2.9.9ScalarendptEXTGIPADDread-onlycurrentList of external router addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of routers available for…
1.3.6.1.4.1.6889.2.69.2.9.10ScalarendptEXTIPADDread-onlycurrentEndpoint External IP address. This variable returns a 4-octet string specifying the endpoint's current outer IP address when in VPN mode.
1.3.6.1.4.1.6889.2.69.2.9.11ScalarendptEXTNETMASKread-onlycurrentExternal Subnet mask. This variable returns a 4-octet string specifying the subnet mask to be used outside of the VPN tunnel when in VPN mode.
1.3.6.1.4.1.6889.2.69.2.9.12ScalarendptIKECONFIGMODEread-onlycurrentIKE Configuration flag. This variable returns 1 if the ISAKMP configuration method to be used, else 2..
1.3.6.1.4.1.6889.2.69.2.9.13ScalarendptIKEDHread-onlycurrentIn-Use Diffie-Hellman Group for IKE SA. This variable returns the negotiated IKE Phase 1 DH Group number.
1.3.6.1.4.1.6889.2.69.2.9.14ScalarendptIKEDHGRPread-onlycurrentProposed Diffie-Hellman Group for IKE SA. This variable returns 1 if the DH Group Description proposed for IKE Phase 1 is the First Oakley Group, 2 if the prop…
1.3.6.1.4.1.6889.2.69.2.9.15ScalarendptIKEIDread-onlycurrentIKE Phase 1 identity, This variable returns the identity (also known as in XAUTH as group name) used during IKE Phase 1 negotiation.
1.3.6.1.4.1.6889.2.69.2.9.16ScalarendptIKEIDTYPEread-onlycurrentIKE SA identification type. This varable returns 1 if the Identification Type used for IKE Phase 1 is ID_IPV4_ADDR, 2 if the ID Type is ID_FQDN, 3 if the ID Ty…
1.3.6.1.4.1.6889.2.69.2.9.17ScalarendptIKEOVERTCPread-onlycurrentIKE TCP usage policy. This variable returns 0 if IKE is only to use UDP, 1 if TCP is to be tried after an IKE times out using UDP, or 2 if only TCP is to be us…
1.3.6.1.4.1.6889.2.69.2.9.18ScalarendptIKEP1AUTHread-onlycurrentIn-Use IKE Phase 1 authentication algorithm. This variable returns 1 if MD5 was negotiated, and 2 if SHA was negotiated.
1.3.6.1.4.1.6889.2.69.2.9.19ScalarendptIKEP1AUTHALGread-onlycurrentProposed IKE Phase 1 authentication algorithm. This variable returns 0 if if either hash algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if…
1.3.6.1.4.1.6889.2.69.2.9.20ScalarendptIKEP1ENCread-onlycurrentIn-Use IKE Phase 1 encryption algorithm. This variable returns 1 if AES-CBC-128 was negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if…
1.3.6.1.4.1.6889.2.69.2.9.21ScalarendptIKEP1ENCALGread-onlycurrentIKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC…
1.3.6.1.4.1.6889.2.69.2.9.22ScalarendptIKEP1LIFESECread-onlycurrentIKE Security Association lifetime. This variable returns the proposed number of seconds for the SA Life Duration for IKE Phase 1.
1.3.6.1.4.1.6889.2.69.2.9.23ScalarendptIKEP2AUTHread-onlycurrentIn-Use IKE Phase 2 authentication algorithm. This variable returns 1 if MD5 was negotiated, and 2 if SHA was negotiated.
1.3.6.1.4.1.6889.2.69.2.9.24ScalarendptIKEP2AUTHALGread-onlycurrentIKE Phase 2 authentication algorithm. This variable returns 0 if either hash algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is prop…
1.3.6.1.4.1.6889.2.69.2.9.25ScalarendptIKEP2ENCread-onlycurrentIn-Use IKE Phase 2 encryption algorithm. This variable returns 1 if AES-CBC-128 was negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if…
1.3.6.1.4.1.6889.2.69.2.9.26ScalarendptIKEP2ENCALGread-onlycurrentIKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC…
1.3.6.1.4.1.6889.2.69.2.9.27ScalarendptIKEP2LIFESECread-onlycurrentIPsec Security Association lifetime. This variable returns the proposed number of seconds for the SA Life Duration for IKE Phase 2.
1.3.6.1.4.1.6889.2.69.2.9.28ScalarendptIKESALIFEKBread-onlycurrentIKE Security Association KB Lifetime. This variable returns the IKE SA lifetime in kilobytes.
1.3.6.1.4.1.6889.2.69.2.9.29ScalarendptIKESALIFESECread-onlycurrentIKE Security Association time Lifetime. This variable returns the IKE SA lifetime in seconds.
1.3.6.1.4.1.6889.2.69.2.9.30ScalarendptIKETRANSPORTread-onlycurrentIn-Use IKE transport protocol. This variable returns 0 if IKE is not in use, 1 if UDP is being used for IKE transport, or 2 if TCP is being used for IKE transp…
1.3.6.1.4.1.6889.2.69.2.9.31ScalarendptIKEXCHGMODEread-onlycurrentIKE Phase 1 negotiation mode. This variable returns 1 if the IKE Phase 1 exchange usesd is Aggressive Mode, else 2 for Main Mode.
1.3.6.1.4.1.6889.2.69.2.9.32ScalarendptIPSECSALIFEKBread-onlycurrentIPsec Security Association KB Lifetime. This variable returns the IPsec SA lifetime in kilobytes.
1.3.6.1.4.1.6889.2.69.2.9.33ScalarendptIPSECSALIFESECread-onlycurrentIPsec Security Association time Lifetime. This variable returns the IPsec SA lifetime in seconds.
1.3.6.1.4.1.6889.2.69.2.9.34ScalarendptIPSECSUBNETread-onlycurrentVPN Tunnel IP Address ranges. This variable returns the IP address ranges that will use the VPN tunnel, with 0.0.0.0/0 meaning all IP addresses.
1.3.6.1.4.1.6889.2.69.2.9.35ScalarendptNORTELAUTHread-onlycurrentNortel gateway authentication method. If Nortel gateway user authentication is to be used, this variable returns 1 if a local username and password are to be u…
1.3.6.1.4.1.6889.2.69.2.9.36ScalarendptPFSDHread-onlycurrentIn-Use Diffie-Hellman Group for IPsec SA. This variable returns the negotiated IKE PFS DH Group number.
1.3.6.1.4.1.6889.2.69.2.9.37ScalarendptPFSDHGRPread-onlycurrentDiffie-Hellman Group for IPsec SA. This variable returns 1 if the DH Group Description proposed for IPSec SA is the First Oakley Group, 2 if the proposal is fo…
1.3.6.1.4.1.6889.2.69.2.9.38ScalarendptPSWDTYPEread-onlycurrentVPN Password Permissions. This variable returns 1 if the password may be alphanumeric and is to be stored in non-volatile memory as the value of NVVPNPSWD, 2 i…
1.3.6.1.4.1.6889.2.69.2.9.39ScalarendptSGINUSEread-onlycurrentVPN Security Gateway address. This variable returns a 4-octet string specifying the IP address of the VPN Security Gateway in use, else 0.0.0.0.
1.3.6.1.4.1.6889.2.69.2.9.40ScalarendptSGIPread-onlycurrentVPN Security Gateway list. This variable returns the list of VPN security gateway IP addresses available to the telephone.
1.3.6.1.4.1.6889.2.69.2.9.41ScalarendptSGVENDORread-onlycurrentVPN Security Gateway Vendor. This variable returns 1 if the IKE implementation matches Juniper/NetScreen, 2 if it matches Cisco, 3 if it matches Check Point/No…
1.3.6.1.4.1.6889.2.69.2.9.42ScalarendptSGVERSIONread-onlycurrentSecurity Gateway Version. This variable returns the version information, if any, of the Security Gateway with wich the telephone has a VPN tunnel established, …
1.3.6.1.4.1.6889.2.69.2.9.43ScalarendptVPNMODEread-onlycurrentVPN Support Specification. This variable returns 1 if VPN functionality is enabled, else 0.
1.3.6.1.4.1.6889.2.69.2.9.44ScalarendptVPNUSERread-onlycurrentVPN User Name. This variable returns the user name to be used during authentication.
1.3.6.1.4.1.6889.2.69.2.9.45ScalarendptVPNUSERTYPEread-onlycurrentVPN User Name Permissions. This variable returns 1 if the user can change the VPN username, else 0.
1.3.6.1.4.1.6889.2.69.2.9.46ScalarendptXAUTHread-onlycurrentXAUTH status. This variable returns 2 if XAUTH is disabled, else 1.
MIB Viewer