BASIS-GENERIC-MIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| BASIS-MIB | cardGeneric |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1 | NodecardInformation | |||
| 1.3.6.1.4.1.351.110.2.1.1 | ScalarmoduleSlotNumber | read-only | mandatory | Slot number this card is present |
| 1.3.6.1.4.1.351.110.2.1.2 | ScalarfunctionModuleType | read-only | mandatory | This object holds the type of the card. The card can type is for Processor module as well as service module. |
| 1.3.6.1.4.1.351.110.2.1.3 | ScalarfunctionModuleDescription | read-only | mandatory | Describes the card |
| 1.3.6.1.4.1.351.110.2.1.4 | ScalarfunctionModuleSerialNum | read-only | mandatory | Serial number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.5 | ScalarfunctionModuleHWRev | read-only | mandatory | Hardware revision number for function Module. |
| 1.3.6.1.4.1.351.110.2.1.6 | ScalarfunctionModuleFWRev | read-only | mandatory | Firmware revision number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.7 | ScalarfunctionModuleState | read-only | mandatory | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. standby(2) : card in standby state. … |
| 1.3.6.1.4.1.351.110.2.1.8 | ScalarfunctionModuleResetReason | read-only | mandatory | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) : watchdog resourceOverflow (4) : reso… |
| 1.3.6.1.4.1.351.110.2.1.9 | ScalarlineModuleType | read-only | mandatory | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physical devices. These are specific … |
| 1.3.6.1.4.1.351.110.2.1.10 | ScalarlineModuleDescription | read-only | mandatory | This object contains description of the line module. |
| 1.3.6.1.4.1.351.110.2.1.11 | ScalarlineModuleSerialNum | read-only | mandatory | This object contains Serial number of the line module. |
| 1.3.6.1.4.1.351.110.2.1.12 | ScalarlineModuleHWRev | read-only | mandatory | This object contains Hardware revision for line module. |
| 1.3.6.1.4.1.351.110.2.1.13 | ScalarlineModuleFWRev | read-only | mandatory | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet string. |
| 1.3.6.1.4.1.351.110.2.1.14 | ScalarlineModuleState | read-only | mandatory | line module status. |
| 1.3.6.1.4.1.351.110.2.1.15 | ScalarmoduleTrapAlarmSeverity | read-only | mandatory | This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. Th… |
| 1.3.6.1.4.1.351.110.2.1.16 | ScalarmibVersionNumber | read-only | mandatory | MIB version number. Updated when any part of the MIB changes. |
| 1.3.6.1.4.1.351.110.2.1.17 | ScalarconfigChangeTypeBitMap | read-only | mandatory | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Configuration Change bit 3 set = … |
| 1.3.6.1.4.1.351.110.2.1.18 | ScalarconfigChangeObjectIndex | read-only | mandatory | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port resouce partition change (bit 17)… |
| 1.3.6.1.4.1.351.110.2.1.19 | ScalarconfigChangeStatus | read-only | mandatory | This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other object… |
| 1.3.6.1.4.1.351.110.2.1.20 | ScalarcardIntegratedAlarmBitMap | read-only | mandatory | Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: LineModuleSt… |
| 1.3.6.1.4.1.351.110.2.1.21 | ScalarcleiCode | read-only | mandatory | Common Language Equipment(CLEI) Code. |
| 1.3.6.1.4.1.351.110.2.1.22 | ScalarmacAddress | read-only | mandatory | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
| 1.3.6.1.4.1.351.110.2.1.23 | ScalarmacAddrBlkSize | read-only | mandatory | The MAC address block size, entered by manufacturing. |
| 1.3.6.1.4.1.351.110.2.1.24 | ScalarfinalTestTechnician | read-only | mandatory | The Final Test Technician Employee Identification Number. |
| 1.3.6.1.4.1.351.110.2.1.25 | ScalarhwFailures | read-only | mandatory | Hardware failure code. |
| 1.3.6.1.4.1.351.110.2.1.26 | ScalarhwHistory | read-only | mandatory | RMA Test History - RMA Failure Code. |
| 1.3.6.1.4.1.351.110.2.1.27 | ScalarsecLineModuleType | read-only | mandatory | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally with connectors for physical… |
| 1.3.6.1.4.1.351.110.2.1.28 | ScalarsecLineModuleDescription | read-only | mandatory | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.29 | ScalarsecLineModuleSerialNum | read-only | mandatory | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.30 | ScalarsecLineModuleHWRev | read-only | mandatory | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.31 | ScalarsecLineModuleFWRev | read-only | mandatory | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revision, then this object returns… |
| 1.3.6.1.4.1.351.110.2.1.32 | ScalarsecLineModuleState | read-only | mandatory | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.33 | ScalarconfigChangeParentObjectIndex | read-only | mandatory | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (line or port) of configChange… |
| 1.3.6.1.4.1.351.110.2.1.34 | ScalarconfigChangeGrandParentObjectIndex | read-only | mandatory | Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) of configChangeParentObjectInd… |
| 1.3.6.1.4.1.351.110.2.1.35 | ScalarconfigChangeSMSpecificObject | read-only | mandatory | configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the s… |
| 1.3.6.1.4.1.351.110.2.1.36 | ScalartransId | read-only | mandatory | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented by one for every configuration … |
| 1.3.6.1.4.1.351.110.2.2 | NodecardInterface | |||
| 1.3.6.1.4.1.351.110.2.2.1 | TableinterfaceLineTable | not-accessible | mandatory | This table has list of the physical interfaces and the services available on this module. |
| 1.3.6.1.4.1.351.110.2.2.1.1 | RowinterfaceLineEntry | not-accessible | mandatory | An entry for physical interface |
| 1.3.6.1.4.1.351.110.2.2.1.1.1 | ColumninterfaceLineNum | read-only | mandatory | An index to uniquely indentify the physical interface and service. Indices 1..8 are used for VISM-8T1/E1. |
| 1.3.6.1.4.1.351.110.2.2.1.1.2 | ColumninterfaceLineType | read-only | mandatory | This object indicates the type of interfaces provided by this Module. These numbers are from RFC1700. |
| 1.3.6.1.4.1.351.110.2.2.1.1.3 | ColumninterfaceNumOfPortsPerLine | read-only | mandatory | The number of physical ports of the line type. VISM has a port, but is not linked to these physical lines, hence value=0 is returned. |
| 1.3.6.1.4.1.351.110.2.2.1.1.4 | ColumninterfaceServiceType | read-only | mandatory | The services available on the interfaceLineType object |
| 1.3.6.1.4.1.351.110.2.2.1.1.5 | ColumninterfaceNumOfPVC | read-only | mandatory | The Max number of Permanent Virtual Channels available per physical line (line as defined in interfaceLineType). VISM has a PVC but is not linked to the lines,… |
| 1.3.6.1.4.1.351.110.2.2.1.1.6 | ColumninterfaceNumOfEgressQueue | read-only | mandatory | The Max number of Queues per port. Value=0 is returned for VISM card. |
| 1.3.6.1.4.1.351.110.2.2.2 | ScalarinterfaceNumOfValidEntries | read-only | mandatory | Number of rows in interface Table The number represents the physcial interfaces the module has. |
| 1.3.6.1.4.1.351.110.2.3 | NodecardSelfTest | |||
| 1.3.6.1.4.1.351.110.2.3.1 | ScalarselfTestEnable | read-write | mandatory | This object indicates the self test state 1 ==> self test enabled 2 ==> self test disabled |
| 1.3.6.1.4.1.351.110.2.3.2 | ScalarselfTestPeriod | read-write | mandatory | Interval (in minutes) for self test. |
| 1.3.6.1.4.1.351.110.2.3.3 | ScalarselfTestState | read-only | mandatory | Self test results for the module. |
| 1.3.6.1.4.1.351.110.2.3.4 | ScalarselfTestResultDescription | read-only | mandatory | Self test Result description |
| 1.3.6.1.4.1.351.110.2.3.5 | ScalarselfTestClrResultButton | read-write | mandatory | This object is used for clearing the result of an online diagnostics(or other self tests). |
| 1.3.6.1.4.1.351.110.2.4 | NodecontrolMsgCounter | |||
| 1.3.6.1.4.1.351.110.2.4.1 | ScalarriscXmtCtrlMsg | read-only | mandatory | The number of control Frames transmitted to SAR (from RISC) maintained by RISC |
| 1.3.6.1.4.1.351.110.2.4.2 | ScalarriscRcvCtrlMsg | read-only | mandatory | The number of control Frames received from SAR (to RISC) maintained by RISC |
| 1.3.6.1.4.1.351.110.2.4.3 | ScalarsarXmtCtrlMsg | read-only | mandatory | The number of control Frames transmitted to RISC from SAR maintained by SAR (should be equal to (riscRcvCtrlMsg) |
| 1.3.6.1.4.1.351.110.2.4.4 | ScalarsarRcvCtrlMsg | read-only | mandatory | The number of control Frames received to SAR from RISC maintained by SAR (should be equal to (riscXmtCtrlMsg) |
| 1.3.6.1.4.1.351.110.2.4.5 | ScalarsarCtrlMsgDiscLenErr | read-only | mandatory | Total control (management) frames (for MGX8800) or cells(for MGX8220) discarded due to illegal length error |
| 1.3.6.1.4.1.351.110.2.4.6 | ScalarsarCtrlMsgDiscCRCErr | read-only | mandatory | Total control (management) frames (MGX8800) or cells(MGX8220) discard due to illegal CRC error. |
| 1.3.6.1.4.1.351.110.2.4.7 | ScalarsarCtrlMsgDiscUnknownChan | read-only | mandatory | Count of discarded control message due to unknown channel error. |
| 1.3.6.1.4.1.351.110.2.4.8 | ScalarsarCtrlMsgLastUnkownChan | read-only | mandatory | The control cell header Rcvd of the last unknown channel. |
| 1.3.6.1.4.1.351.110.2.4.9 | ScalarctrlMsgClrButton | read-write | mandatory | This object is used for clearing the messages in controlMsgCounter group. |
| 1.3.6.1.4.1.351.110.2.5 | NodesarChannelCounter | |||
| 1.3.6.1.4.1.351.110.2.5.1 | TablesarChannelCounterTable | not-accessible | mandatory | The table is for logical channels This table contains the counters for cells transmitted on each channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1 | RowsarChannelCounterEntry | not-accessible | mandatory | An entry for logical channel |
| 1.3.6.1.4.1.351.110.2.5.1.1.1 | ColumnsarShelfNum | read-only | mandatory | Shelf number |
| 1.3.6.1.4.1.351.110.2.5.1.1.2 | ColumnsarSlotNum | read-only | mandatory | Slot number, the slot and shelf info is required here because BSC sends the OAM cells for the FRSM cards that have failed BSC could have upto 4000 connections … |
| 1.3.6.1.4.1.351.110.2.5.1.1.3 | ColumnsarChanNum | read-only | mandatory | BSC could have upto 4000 connections in this table |
| 1.3.6.1.4.1.351.110.2.5.1.1.4 | ColumnxmtCells | read-only | mandatory | The number of cells transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.5 | ColumnxmtCellsCLP | read-only | mandatory | The total number of CLP cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.6 | ColumnxmtCellsAIS | read-only | mandatory | The number of AIS cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.7 | ColumnxmtCellsFERF | read-only | mandatory | The number of FERF cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.8 | ColumnxmtCellsBCM | read-only | mandatory | The number of BCM cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.9 | ColumnxmtCellsEnd2EndLpBk | read-only | mandatory | The number of End2End loop cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.10 | ColumnxmtCellsSegmentLpBk | read-only | mandatory | The number of segment loop cells that were transmitted on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.11 | ColumnxmtCellsDiscShelfAlarm | read-only | mandatory | The number of cells discard due to Shelfalarm on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.12 | ColumnrcvCells | read-only | mandatory | The number of cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.13 | ColumnrcvCellsCLP | read-only | mandatory | The number of CLP cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.14 | ColumnrcvCellsAIS | read-only | mandatory | The number of AIS cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.15 | ColumnrcvCellsFERF | read-only | mandatory | The number of FERF cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.16 | ColumnrcvCellsBCM | read-only | mandatory | The number of BCM cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.17 | ColumnrcvCellsEnd2EndLpBk | read-only | mandatory | The number of End2End loop cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.18 | ColumnrcvCellsSegmentLpBk | read-only | mandatory | The number of segment loop cells that were received on this channel. |
| 1.3.6.1.4.1.351.110.2.5.1.1.19 | ColumnrcvCellsDiscOAM | read-only | mandatory | The number of cells that had CRC error on OAM cells |
| 1.3.6.1.4.1.351.110.2.5.1.1.20 | ColumnsarClrButton | read-write | mandatory | clear the counters in the table |
| 1.3.6.1.4.1.351.110.2.5.2 | ScalarchanNumOfValidEntries | read-only | mandatory | Number of entries in the sar channel table |