BAY-STACK-ADAC-MIB
33 objects
Avaya Auto-Discovery/Auto-Configuration of Avaya IP Phones MIB Copyright 2014 Avaya. All rights reserved. This Avaya SNMP Management Information Base Specification embodies Avaya confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList VlanIdOrNone |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.5.9 | IdentitybayStackAdacMib | Avaya Auto-Discovery/Auto-Configuration of Avaya IP Phones MIB Copyright 2014 Avaya. All rights reserved. This Avaya SNMP Management Information Base Specifica… | ||
| 1.3.6.1.4.1.45.5.9.0 | NodebsAdacNotifications | |||
| 1.3.6.1.4.1.45.5.9.0.1 | NotificationbsAdacPortConfigNotification | current | This notification indicates if the Auto-Configuration is applied or not on the port. It will be sent on every status change. | |
| 1.3.6.1.4.1.45.5.9.0.2 | NotificationbsAdacPortOperDisabledNotification | current | This notification indicates if a port having bsAdacPortAdminEnable set to true(1) changes its bsAdacPortOperEnable from true(1) to false(2) due to some conditi… | |
| 1.3.6.1.4.1.45.5.9.1 | NodebsAdacObjects | |||
| 1.3.6.1.4.1.45.5.9.1.1 | NodebsAdacScalars | |||
| 1.3.6.1.4.1.45.5.9.1.1.2 | ScalarbsAdacAdminEnable | read-write | current | This object is used to administratively enable or disable ADAC. A value of true(1) means ADAC should be enabled, while a value of false(2) means ADAC should be… |
| 1.3.6.1.4.1.45.5.9.1.1.3 | ScalarbsAdacOperatingMode | read-write | current | This operating mode must be set depending on how the IP Phones are configured to send frames (tagged/untagged) and on the desired level of complexity for auto-… |
| 1.3.6.1.4.1.45.5.9.1.1.4 | ScalarbsAdacCallServerPort | read-write | current | The port on which the Call Server is connected. This value is used only when the current operating mode is either untaggedFramesAdvanced(2) or taggedFrames(3).… |
| 1.3.6.1.4.1.45.5.9.1.1.5 | ScalarbsAdacUplinkPort | read-write | current | The uplink port is used usually when the Call Server is not connected directly to the current module/stack. This value is used only when the current operating … |
| 1.3.6.1.4.1.45.5.9.1.1.6 | ScalarbsAdacVoiceVlan | read-write | current | A value that uniquely identifies the Voice Virtual LAN associated with ADAC. This value it is used only when the current operating mode is untaggedFramesAdvanc… |
| 1.3.6.1.4.1.45.5.9.1.1.7 | ScalarbsAdacNotificationControlEnable | read-write | current | This object controls whether port status changes will result in generation of a bsAdacPortConfigNotification. The value true(1) means that the notifications wi… |
| 1.3.6.1.4.1.45.5.9.1.1.8 | ScalarbsAdacMacAddrRangeControl | read-write | current | This object always returns none(1) when retrieved. When set to clearTable(2), it will delete all entries from the bsAdacMacAddrRangeTable. When set to defaultT… |
| 1.3.6.1.4.1.45.5.9.1.1.9 | ScalarbsAdacOperEnable | read-only | current | This object indicates whether ADAC is operationally enabled. A value of true(1) indicates that it is enabled, while a value of false(2) indicates that it is di… |
| 1.3.6.1.4.1.45.5.9.1.1.10 | ScalarbsAdacCallServerPortList | read-write | current | The ports on which the Call Server is connected. This value is used only when the current operating mode is either untaggedFramesAdvanced(2) or taggedFrames(3)… |
| 1.3.6.1.4.1.45.5.9.1.1.11 | ScalarbsAdacUplinkPortList | read-write | current | The uplink ports are used usually when the Call Server is not connected directly to the current module/stack. This value is used only when the current operatin… |
| 1.3.6.1.4.1.45.5.9.1.1.12 | ScalarbsAdacUplinkType | read-write | current | The ADAC uplink type. A value of port(1) means that the ADAC uplink is the clasical port type uplink. bsAdacUplinkPortList will be used to specify the actual u… |
| 1.3.6.1.4.1.45.5.9.1.2 | TablebsAdacPortTable | not-accessible | current | A table of objects that display and control the port attributes of ADAC. |
| 1.3.6.1.4.1.45.5.9.1.2.1 | RowbsAdacPortEntry | not-accessible | current | A set of objects that display and control the port attributes of ADAC. |
| 1.3.6.1.4.1.45.5.9.1.2.1.1 | ColumnbsAdacPortIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.45.5.9.1.2.1.2 | ColumnbsAdacPortAdminEnable | read-write | current | true (1) Auto-Detection (and implicitly Auto-Configuration) of Avaya IP Phones is enabled on this interface. false (2) Auto-Detection (and implicitly Auto-Conf… |
| 1.3.6.1.4.1.45.5.9.1.2.1.3 | ColumnbsAdacPortConfigStatus | read-only | current | Describes the Auto-Configuration status for the port. A value of configApplied(1) means that the ADAC configuration is applied for this port. A value of config… |
| 1.3.6.1.4.1.45.5.9.1.2.1.4 | ColumnbsAdacPortTaggedFramesPvid | read-write | current | This is the PVID value that Auto-Configuration will try to apply for ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set to true(1)), and whi… |
| 1.3.6.1.4.1.45.5.9.1.2.1.5 | ColumnbsAdacPortTaggedFramesTagging | read-write | current | This is the tagging value that Auto-Configuration will apply for ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set to true(1)), and which a… |
| 1.3.6.1.4.1.45.5.9.1.2.1.6 | ColumnbsAdacPortType | read-only | current | Describes how ADAC classifies this port. A value of telephony(1) means that the Auto-Detection is enabled for this port (bsAdacPortAdminEnable is set to true(1… |
| 1.3.6.1.4.1.45.5.9.1.2.1.7 | ColumnbsAdacPortOperEnable | read-only | current | This object indicates whether Auto-Detection is operationally enabled on port. A value of true(1) indicates that it is enabled, while a value of false(2) indic… |
| 1.3.6.1.4.1.45.5.9.1.2.1.8 | ColumnbsAdacPortMacDetectionEnable | read-write | current | true (1) Auto-Detection of Avaya IP Phones based on MAC Address is enabled on this interface. false (2) Auto-Detection of Avaya IP Phones based on MAC Address … |
| 1.3.6.1.4.1.45.5.9.1.2.1.9 | ColumnbsAdacPortLldpDetectionEnable | read-write | current | true (1) Auto-Detection of Avaya IP Phones based on 802.1ab is enabled on this interface. false (2) Auto-Detection of Avaya IP Phones based on 802.1ab is disab… |
| 1.3.6.1.4.1.45.5.9.1.3 | TablebsAdacMacAddrRangeTable | not-accessible | current | A table of objects that display and control the attributes of the MAC Address ranges supported by ADAC. Overlapping ranges are not allowed and the attempts to … |
| 1.3.6.1.4.1.45.5.9.1.3.1 | RowbsAdacMacAddrRangeEntry | not-accessible | current | A set of objects that display and control the attributes of the MAC Address ranges supported by ADAC. |
| 1.3.6.1.4.1.45.5.9.1.3.1.1 | ColumnbsAdacMacAddrRangeLowEndIndex | not-accessible | current | The low end of the MAC Address range. |
| 1.3.6.1.4.1.45.5.9.1.3.1.2 | ColumnbsAdacMacAddrRangeHighEndIndex | not-accessible | current | The high end of the MAC Address range. |
| 1.3.6.1.4.1.45.5.9.1.3.1.3 | ColumnbsAdacMacAddrRangeRowStatus | read-create | current | This is used to control creation/deletion of entries in this table. |