BAY-STACK-RADIUS-MIB
60 objects
This MIB module is used for RADIUS configuration settings in Nortel's software and products.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.5.21 | IdentitybayStackRadiusMib | This MIB module is used for RADIUS configuration settings in Nortel's software and products. | ||
| 1.3.6.1.4.1.45.5.21.0 | NodebsRadiusNotifications | |||
| 1.3.6.1.4.1.45.5.21.0.1 | NotificationbsRadiusReachabilityServerDown | current | This notification is generated when a Radius server fails to respond to reachability requests. | |
| 1.3.6.1.4.1.45.5.21.0.2 | NotificationbsRadiusReachabilityServerUp | current | This notification is generated when a Radius server, which has previously failed to respond to reachability requests, responds to a reachability request. | |
| 1.3.6.1.4.1.45.5.21.1 | NodebsRadiusObjects | |||
| 1.3.6.1.4.1.45.5.21.1.1 | NodebsRadiusScalars | |||
| 1.3.6.1.4.1.45.5.21.1.1.1 | ScalarbsRadiusUseMgmtIp | read-write | current | This object controls whether RADIUS uses the system's management IP address as the source address for RADIUS requests. |
| 1.3.6.1.4.1.45.5.21.1.1.2 | ScalarbsRadiusAccountingEnabled | read-write | current | This object controls whether RADIUS accounting is enabled. |
| 1.3.6.1.4.1.45.5.21.1.1.3 | ScalarbsRadiusPasswordFallbackEnabled | read-write | current | This object controls whether RADIUS password fallback is enabled. |
| 1.3.6.1.4.1.45.5.21.1.1.4 | ScalarbsRadiusAccountingPort | read-write | current | This object controls the port used for RADIUS accounting. |
| 1.3.6.1.4.1.45.5.21.1.1.5 | ScalarbsRadiusAccountingInterimUpdates | read-write | current | This object controls whether RADIUS interim updates are enabled or disabled. |
| 1.3.6.1.4.1.45.5.21.1.1.6 | ScalarbsRadiusAccountingInterimUpdatesInterval | read-write | current | This object controls the interval for RADIUS interim updates. |
| 1.3.6.1.4.1.45.5.21.1.1.7 | ScalarbsRadiusAccountingInterimUpdatesIntervalSource | read-write | current | This object controls the source for the interval value for RADIUS interim updates. If the value is configuredValue(1), then the value of bsRadiusAccountingInte… |
| 1.3.6.1.4.1.45.5.21.1.1.8 | ScalarbsRadiusDynAuthReplayProtection | read-write | current | Globally enable or disable RADIUS replay protection. |
| 1.3.6.1.4.1.45.5.21.1.1.9 | ScalarbsRadiusReachability | read-write | current | Select the method used to test RADIUS server reachablity. |
| 1.3.6.1.4.1.45.5.21.1.1.10 | ScalarbsRadiusReachabilityUserName | read-write | current | The username used for the RADIUS server reachability useRadius option. |
| 1.3.6.1.4.1.45.5.21.1.1.11 | ScalarbsRadiusReachabilityPassword | read-write | current | The password used for the RADIUS server reachability useRadius option. |
| 1.3.6.1.4.1.45.5.21.1.1.12 | ScalarbsRadiusEncapsulationProtocol | read-write | current | This object specifies the type of encapsulation for RADIUS packets. |
| 1.3.6.1.4.1.45.5.21.1.1.13 | ScalarbsRadiusReachabilityTimeout | read-write | current | This object specifies the time interval to wait before re-sending a message to the RADIUS server . |
| 1.3.6.1.4.1.45.5.21.1.1.14 | ScalarbsRadiusReachabilityRetry | read-write | current | This object specifies the number of retry attempts to reach the RADIUS server. |
| 1.3.6.1.4.1.45.5.21.1.1.15 | ScalarbsRadiusReachabilityBadTimer | read-write | current | This object specifies the interval between checks when the RADIUS server is unreachable. |
| 1.3.6.1.4.1.45.5.21.1.1.16 | ScalarbsRadiusReachabilityGoodTimer | read-write | current | This object specifies the interval between checks when the RADIUS server is reachable. |
| 1.3.6.1.4.1.45.5.21.1.2 | TablebsRadiusServerTable | not-accessible | current | This table is used to control RADIUS server settings. |
| 1.3.6.1.4.1.45.5.21.1.2.1 | RowbsRadiusServerEntry | not-accessible | current | An entry containing objects defining how to connect to a RADIUS server. |
| 1.3.6.1.4.1.45.5.21.1.2.1.1 | ColumnbsRadiusServerIndex | not-accessible | current | A unique integer value used to identify entries in this table. |
| 1.3.6.1.4.1.45.5.21.1.2.1.2 | ColumnbsRadiusServerPriority | read-create | current | This value indicates the order in which entries in this table are used when attempting to contact a RADIUS server. Entries with a lower priority number are tri… |
| 1.3.6.1.4.1.45.5.21.1.2.1.3 | ColumnbsRadiusServerAddressType | read-create | current | The type of address contained in the corresponding instance of bsRadiusServerAddress. |
| 1.3.6.1.4.1.45.5.21.1.2.1.4 | ColumnbsRadiusServerAddress | read-create | current | The internet address to use when attempting to contact a RADIUS server. |
| 1.3.6.1.4.1.45.5.21.1.2.1.5 | ColumnbsRadiusServerUdpPort | read-create | current | The UDP port number to use when trying to contact the RADIUS server at the address contained in the corresponding instance of bsRadiusServerAddress. |
| 1.3.6.1.4.1.45.5.21.1.2.1.6 | ColumnbsRadiusServerTimeout | read-create | current | The time interval to wait before re-sending a message to this RADIUS server. |
| 1.3.6.1.4.1.45.5.21.1.2.1.7 | ColumnbsRadiusServerSecret | read-create | current | The shared RADIUS secret to use when communicating with the RADIUS server. Note that when this object is retrieved, its value will always by a zero-length octe… |
| 1.3.6.1.4.1.45.5.21.1.2.1.8 | ColumnbsRadiusServerRowStatus | read-create | current | Controls row creation/deletion in this table. |
| 1.3.6.1.4.1.45.5.21.1.2.1.9 | ColumnbsRadiusServerAccountingPort | read-write | current | The UDP accounting port number to use when trying to contact the RADIUS server at the address contained in the corresponding instance of bsRadiusServerAddress. |
| 1.3.6.1.4.1.45.5.21.1.2.1.10 | ColumnbsRadiusServerAccountingEnabled | read-write | current | This object controls whether RADIUS accounting is enabled for this RADIUS server instance. |
| 1.3.6.1.4.1.45.5.21.1.2.1.11 | ColumnbsRadiusServerRetryLimit | read-write | current | This object specifies the number of RADIUS retry attempts, for this RADIUS server instance. |
| 1.3.6.1.4.1.45.5.21.1.3 | TablebsRadiusDynAuthClientTable | not-accessible | current | This table is used to configure RADIUS Dynamic Authorization Clients. RADIUS Dynamic Authorization Clients are entities which can send Disconnect and Change Of… |
| 1.3.6.1.4.1.45.5.21.1.3.1 | RowbsRadiusDynAuthClientEntry | not-accessible | current | An entry containing objects defining RADIUS Dynamic Authorization Clients which can connect to this RADIUS Dynamic Authorization Server. |
| 1.3.6.1.4.1.45.5.21.1.3.1.1 | ColumnbsRadiusDynAuthClientAddressType | not-accessible | current | The type of address contained in the corresponding instance of bsRadiusDynAuthClientAddress. |
| 1.3.6.1.4.1.45.5.21.1.3.1.2 | ColumnbsRadiusDynAuthClientAddress | not-accessible | current | The internet address of a RADIUS Dynamic Authorization Client configured in this entry. |
| 1.3.6.1.4.1.45.5.21.1.3.1.3 | ColumnbsRadiusDynAuthClientUdpPort | read-create | current | The UDP port number the server/NAS listens on for requests from the RADIUS Dynamic Authorization Client configured in this entry. |
| 1.3.6.1.4.1.45.5.21.1.3.1.4 | ColumnbsRadiusDynAuthClientSecret | read-create | current | The secret shared between RADIUS Dynamic Authorization Client and Server. Note that when this object is retrieved, its value will always by a zero-length octet… |
| 1.3.6.1.4.1.45.5.21.1.3.1.5 | ColumnbsRadiusDynAuthClientEnabled | read-create | current | Enable or disable packet receive from this RADIUS Dynamic Authorization Client. The NAS will not listen for requests from the client unless this object is true… |
| 1.3.6.1.4.1.45.5.21.1.3.1.6 | ColumnbsRadiusDynAuthClientProcessDisconnectRequests | read-create | current | Enable or disable processing of Disconnect requests from the RADIUS Dynamic Authorization Client. |
| 1.3.6.1.4.1.45.5.21.1.3.1.7 | ColumnbsRadiusDynAuthClientProcessCoARequests | read-create | current | Enable or disable processing of Change-Of-Authorization requests from the RADIUS Dynamic Authorization Client. |
| 1.3.6.1.4.1.45.5.21.1.3.1.8 | ColumnbsRadiusDynAuthClientRowStatus | read-create | current | Controls row creation/deletion in this table. |
| 1.3.6.1.4.1.45.5.21.1.3.1.9 | ColumnbsRadiusDynAuthClientReplayProtection | read-create | current | Enable or disable RADIUS replay protection. |
| 1.3.6.1.4.1.45.5.21.1.3.1.10 | ColumnbsRadiusDynAuthClientProcessReAuthRequests | read-create | current | Enable or disable the processing of Reauthentication requests from the RADIUS Dynamic Authorization Client. |
| 1.3.6.1.4.1.45.5.21.1.4 | TablebsRadiusExtDynAuthClientTable | not-accessible | current | The (conceptual) table listing the RADIUS Dynamic Authorization Clients with which the server shares a secret. This is an extension of radiusDynAuthClientTable. |
| 1.3.6.1.4.1.45.5.21.1.4.1 | RowbsRadiusExtDynAuthClientEntry | not-accessible | current | An entry (conceptual row) representing one Dynamic Authorization Client with which the server shares a secret. |
| 1.3.6.1.4.1.45.5.21.1.4.1.1 | ColumnbsRadiusExtDynAuthServRcRequests | read-only | current | The number of RADIUS Reauthentication-requests received from this Dynamic Authorization Client. This also includes the Reauthentication requests that have a Se… |
| 1.3.6.1.4.1.45.5.21.1.4.1.2 | ColumnbsRadiusExtDynAuthServRcAuthOnlyRequests | read-only | current | The number of RADIUS Reauthentication-requests that include a Service-Type attribute with value 'Authorize Only' received from this Dynamic Authorization Clien… |
| 1.3.6.1.4.1.45.5.21.1.4.1.3 | ColumnbsRadiusExtDynAuthServRcDupRequests | read-only | current | The number of duplicate RADIUS Reauthentication-Request packets received from this Dynamic Authorization Client. This counter may experience a discontinuity wh… |
| 1.3.6.1.4.1.45.5.21.1.4.1.4 | ColumnbsRadiusExtDynAuthServRcAcks | read-only | current | The number of incoming Reauthentication packets from this Dynamic Authorization Client silently discarded by the server application for some reason other than … |
| 1.3.6.1.4.1.45.5.21.1.4.1.5 | ColumnbsRadiusExtDynAuthServRcNacks | read-only | current | The number of RADIUS Reauthentication-NAK packets sent to this Dynamic Authorization Client. This includes the RADIUS Reauthentication-NAK packets sent with a … |
| 1.3.6.1.4.1.45.5.21.1.4.1.6 | ColumnbsRadiusExtDynAuthServRcNacksAuthOnlyRequests | read-only | current | The number of RADIUS Reauthentication-NAK packets that include a Service-Type attribute with value 'Authorize Only' sent to this Dynamic Authorization Client. … |
| 1.3.6.1.4.1.45.5.21.1.4.1.7 | ColumnbsRadiusExtDynAuthServRcNacksNoSess | read-only | current | The number of RADIUS Reauthentication-NAK packets sent to this Dynamic Authorization Client because no session context was found. This counter may experience a… |
| 1.3.6.1.4.1.45.5.21.1.4.1.8 | ColumnbsRadiusExtDynAuthServRcSessReauthenticated | read-only | current | The number of user sessions reauthenticated for the Reauthentication-Requests received from this Dynamic Authorization Client. Depending on site- specific poli… |
| 1.3.6.1.4.1.45.5.21.1.4.1.9 | ColumnbsRadiusExtDynAuthServRcMalformed | read-only | current | The number of malformed RADIUS Reauthentication-Request packets received from this Dynamic Authorization Client. Bad authenticators and unknown types are not i… |
| 1.3.6.1.4.1.45.5.21.1.4.1.10 | ColumnbsRadiusExtDynAuthServRcDropped | read-only | current | The number of incoming Reauthentication packets from this Dynamic Authorization Client silently discarded by the server application for some reason other than … |
| 1.3.6.1.4.1.45.5.21.1.4.1.11 | ColumnbsRadiusExtDynAuthServRcBadAuths | read-only | current | The number of RADIUS Reauthentication-Request packets that contained an invalid Authenticator field received from this Dynamic Authorization Client. This count… |