BCN-NTP-MIB
67 objects
This module provides status as well as statistical information about the NTP service. Most of the OIDs defined on this MIB are based on the work done by A.S. Sethi and Dave Mills in the University of Delaware and published as: Management of the Network Time Protocol (NTP) with SNMP Technical Report No. 98-09 Other references used in the creation of this MIB are RFC-1305 and RFC-5905
Imported Objects
| BCN-SMI-MIB | bcnServices |
| BCN-TC-MIB | BcnAlarmSeverity |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13315.3.1.4 | NodebcnNtp | |||
| 1.3.6.1.4.1.13315.3.1.4.1 | IdentitybcnNtpMIB | This module provides status as well as statistical information about the NTP service. Most of the OIDs defined on this MIB are based on the work done by A.S. S… | ||
| 1.3.6.1.4.1.13315.3.1.4.2 | NodebcnNtpObjects | |||
| 1.3.6.1.4.1.13315.3.1.4.2.1 | IdentitybcnNtpServiceStatus | current | General state of the NTP Service. | |
| 1.3.6.1.4.1.13315.3.1.4.2.1.1 | ScalarbcnNtpSerOperState | read-only | current | Operational state of the Service. The possible states are: running(1) The service is running normally. notRunning(2) The service is stopped either intentionall… |
| 1.3.6.1.4.1.13315.3.1.4.2.2 | IdentitybcnNtpSystem | current | General NTP system information. | |
| 1.3.6.1.4.1.13315.3.1.4.2.2.1 | ScalarbcnNtpSysLeap | read-only | current | Two-bit code warning of an impending leap second to be inserted in the NTP timescale. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.2 | ScalarbcnNtpSysStratum | read-only | current | Indicating the stratum of the local clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP) |
| 1.3.6.1.4.1.13315.3.1.4.2.2.3 | ScalarbcnNtpSysPrecision | read-only | current | Signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.4 | ScalarbcnNtpSysRootDelay | read-only | current | The total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. This is an ASCII string representing a floatin… |
| 1.3.6.1.4.1.13315.3.1.4.2.2.5 | ScalarbcnNtpSysRootDispersion | read-only | current | The maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater than zero are po… |
| 1.3.6.1.4.1.13315.3.1.4.2.2.6 | ScalarbcnNtpSysRefId | read-only | current | The particular reference clock. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.7 | ScalarbcnNtpSysRefTime | read-only | current | The local time when the local clock was last updated. If the local clock has never been synchronized, the value is zero. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.8 | ScalarbcnNtpSysPoll | read-only | current | The minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.9 | ScalarbcnNtpSysPeer | read-only | current | The current synchronization source. This is the association ID of the system peer. The special value NULL indicates there is no currently valid synchronization… |
| 1.3.6.1.4.1.13315.3.1.4.2.2.10 | ScalarbcnNtpSysFreq | read-only | current | The clock frequency offset (PPM) This is an ASCII string representing a floating point number. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.11 | ScalarbcnNtpSysClock | read-only | current | The current local time. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used. |
| 1.3.6.1.4.1.13315.3.1.4.2.2.12 | ScalarbcnNtpSysSystem | read-only | current | The type of the local Operating System |
| 1.3.6.1.4.1.13315.3.1.4.2.2.13 | ScalarbcnNtpSysProcessor | read-only | current | The type of the local Processor |
| 1.3.6.1.4.1.13315.3.1.4.2.2.14 | ScalarbcnNtpSysJitter | read-only | current | Indicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string representing a float… |
| 1.3.6.1.4.1.13315.3.1.4.2.3 | IdentitybcnNtpPeers | current | NTP peers information. | |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1 | TablebcnNtpPeersVarTable | not-accessible | current | A table listing the peers known to the server as well as summary information of their state. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1 | RowbcnNtpPeersVarEntry | not-accessible | current | A logical row in the bcnNtpPeersVarTable. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.1 | ColumnbcnNtpPeersAssocId | not-accessible | current | Association ID of the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.2 | ColumnbcnNtpPeersConfigured | read-only | current | This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.3 | ColumnbcnNtpPeersPeerAddressType | read-only | current | The Internet address type of the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.4 | ColumnbcnNtpPeersPeerAddress | read-only | current | The Internet address of the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.5 | ColumnbcnNtpPeersPeerPort | read-only | current | 16-bit port number of the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.6 | ColumnbcnNtpPeersHostAddressType | read-only | current | The Internet address type of the host. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.7 | ColumnbcnNtpPeersHostAddress | read-only | current | The Internet address of the host. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.8 | ColumnbcnNtpPeersHostPort | read-only | current | 16-bit port number of the host. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.9 | ColumnbcnNtpPeersLeap | read-only | current | Two-bit code warning of an impending leap second to be inserted in the NTP timescale. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.10 | ColumnbcnNtpPeersMode | read-only | current | The association mode,with values coded as follows: 0, unspecified 1, symmetric active 2, symmetric passive 3, client 4, server 5, broadcast 6, reserved for NTP… |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.11 | ColumnbcnNtpPeersStratum | read-only | current | Indicates the stratum of the peer clock. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, secondary reference (via NTP) |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.12 | ColumnbcnNtpPeersPeerPoll | read-only | current | Poll interval of the peer |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.13 | ColumnbcnNtpPeersHostPoll | read-only | current | Poll interval of the host |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.14 | ColumnbcnNtpPeersPrecision | read-only | current | The same as the systemPrecision except this is for the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.15 | ColumnbcnNtpPeersRootDelay | read-only | current | The same as the systemRootDealy except this is for the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.16 | ColumnbcnNtpPeersRootDispersion | read-only | current | The same as the systemDispersion except this is for the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.17 | ColumnbcnNtpPeersRefId | read-only | current | The same as the systemRefid except this is for the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.18 | ColumnbcnNtpPeersRefTime | read-only | current | The same as the systemRefTime except this is for the peer. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.19 | ColumnbcnNtpPeersOrgTime | read-only | current | The local time at the peer when its latest NTP message was sent. If the peer becomes unreachable the value is set to zero. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.20 | ColumnbcnNtpPeersReceiveTime | read-only | current | The local time when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.21 | ColumnbcnNtpPeersTransmitTime | read-only | current | The local time at which the NTP message departed the sender. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.22 | ColumnbcnNtpPeersReach | read-only | current | A shift register of NTP.WINDOW bits used to determine the reachability status of the peer, with bits entering from the least significant (rightmost) end. A pee… |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.23 | ColumnbcnNtpPeersOffset | read-only | current | Filter offset. This is an ASCII string representing a floating point number. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.24 | ColumnbcnNtpPeersDelay | read-only | current | Filter delay. This is an ASCII string representing a floating point number. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.25 | ColumnbcnNtpPeersDispersion | read-only | current | Filter dispersion. This is an ASCII string representing a floating point number. |
| 1.3.6.1.4.1.13315.3.1.4.2.3.1.1.26 | ColumnbcnNtpPeersJitter | read-only | current | bcnNtpPeersJitter indicates how much the individual pulses vary from second to second (as measured by the operating system's clock). This is an ASCII string re… |
| 1.3.6.1.4.1.13315.3.1.4.3 | NodebcnNtpNotification | |||
| 1.3.6.1.4.1.13315.3.1.4.3.0 | NodebcnNtpNotificationEvents | |||
| 1.3.6.1.4.1.13315.3.1.4.3.0.1 | NotificationbcnNtpAlarmNotif | current | A bcnNtpAlarmNotif signifies that the NTP service has transitioned state or a particular event has been detected on the service. | |
| 1.3.6.1.4.1.13315.3.1.4.3.1 | NodebcnNtpNotificationData | |||
| 1.3.6.1.4.1.13315.3.1.4.3.1.1 | ScalarbcnNtpAlarmSeverity | accessible-for-notify | current | Severity classification for the alarm. |
| 1.3.6.1.4.1.13315.3.1.4.3.1.2 | ScalarbcnNtpAlarmInfo | accessible-for-notify | current | Descriptive information about the alarm event. |
| 1.3.6.1.4.1.13315.3.1.4.4 | NodebcnNtpConformance | |||
| 1.3.6.1.4.1.13315.3.1.4.4.1 | NodebcnNtpServiceCompliances | |||
| 1.3.6.1.4.1.13315.3.1.4.4.1.1 | CompliancebcnNtpStatusCompliance | current | Basic conformance | |
| 1.3.6.1.4.1.13315.3.1.4.4.2 | NodebcnNtpServiceGroups | |||
| 1.3.6.1.4.1.13315.3.1.4.4.2.1 | GroupbcnNtpServiceStatusGroup | current | Status conformance. | |
| 1.3.6.1.4.1.13315.3.1.4.4.2.2 | GroupbcnNtpSystemGroup | current | System variables conformance. | |
| 1.3.6.1.4.1.13315.3.1.4.4.2.3 | GroupbcnNtpPeersGroup | current | Peer variables conformance. | |
| 1.3.6.1.4.1.13315.3.1.4.4.2.4 | GroupbcnNtpNotificationEventGroup | current | Server statistics conformance. | |
| 1.3.6.1.4.1.13315.3.1.4.4.2.5 | GroupbcnNtpNotificationDataGroup | current | Server statistics conformance. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NTPLeapIndicator | INTEGER { noWarning(0), addSecond(1), subtractSecond(2), alarm(3) } | current | This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset after 00:00 on the following day. This causes the number of… |
| NTPRefId | OCTET STRING (SIZE (4)) bcnNtpServiceStatus OBJECT-IDENTITY STATUS current DESCRIPTION "General state of the NTP Service." ::= { bcnNtpObjects 1 } | current | 32-bit code identifying the particular server or reference clock. The interpretation depends on the value in the stratum field. For packet stratum 0 (unspecified or invalid), this is a four-character ASCII string. For s… |
| NTPTimeStamp | OCTET STRING (SIZE (8)) | current | NTP timestamps are represented as a 64-bit unsigned fixed-point number, in seconds relative to 00:00 on 1 January 1900. The integer part is in the first 32 bits and the fraction part is in the last 32 bits. |