BIANCA-BRICK-ADSL-MIB
153 objects
The MIB module defining objects for the management of a pair of ADSL modems at each end of the ADSL line. Each such line has an entry in an ifTable which may include multiple modem lines. An agent may reside at either end of the ADSL line however the MIB is designed to require no management communication between them beyond that inherent in the low-level ADSL line protocol. The agent may monitor and control this protocol for its needs. ADSL lines may support optional Fast or Interleaved channels. If these are supported, additional entries corresponding to the supported channels must be created in the ifTable. Thus an ADSL line that supports both channels will have three entries in the ifTable, one for each physical, fast, and interleaved, whose ifType values are equal to adsl(94), fast(125), and interleaved(124), respectively. The ifStackTable is used to represent the relationship between the entries. Naming Conventions: Atuc - (ATUC) modem at near (Central) end of line Atur - (ATUR) modem at Remote end of line Curr - mandatory Prev - Previous Atn - Attenuation ES - Errored Second. LCS - Line Code Specific Lof - Loss of Frame Lol - Loss of Link Los - Loss of Signal Lpr - Loss of Power xxxs- interval of Seconds in which xxx occurs (e.g., xxx=Lof, Los, Lpr) Max - Maximum Mgn - Margin Min - Minimum Psd - Power Spectral Density Snr - Signal to Noise Ratio Tx - Transmit Blks- Blocks, a data unit, see adslAtuXChanCrcBlockLength Build from Initial Version, published as RFC 2662
Imported Objects
| BINTEC-MIB MISSING | adsl |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | Counter32 enterprises MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.5.1 | NodeadslLineMib | |||
| 1.3.6.1.4.1.13464.1.5.1.1 | NodeadslMibObjects | |||
| 1.3.6.1.4.1.13464.1.5.1.1.1 | TableadslLineTable | not-accessible | current | This table includes common attributes describing far end (ATU-R) of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are tho… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1 | RowadslLineEntry | not-accessible | current | An entry in adslLineTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.1 | ColumnadslLineIfIndex | read-only | current | Specifies the ADSL interface index used on this line. |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.2 | ColumnadslLineCoding | read-only | current | Specifies the ADSL coding type used on this line. |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.3 | ColumnadslLineOpenMode | read-write | current | Specifies the ADSL opening mode used on this line. Possible values: open (3): do not use adsl line, ansiT1dot413 (5): ANSI T1.413, gdmt (6): ADSL classic, G.DM… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.4 | ColumnadslLineOperationalMode | read-only | current | Current operational mode : unknown (1), ansiT1dot413 (2): ANSI T1.413, itug992dot1 (3): ADSL classic, G.DMT, ITU-T G.992.1, itug992dot2 (4): Splitterless ADSL,… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.5 | ColumnadslLineTxGainOffset | read-write | current | This parameter allows the user to add an offset to the Tx gain of the CPE of the modem. The offset range is limited between -10dB and +3dB. It is expressed in … |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.6 | ColumnadslLineRxGainOffset | read-write | current | This parameter allows the user to add an offset to the Rx gain of the CPE of the modem. The offset range is limited between -5dB and +3dB. It is expressed in t… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.7 | ColumnadslLineType | read-write | current | This parameter indicates the adsl line type. |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.8 | ColumnadslLineMarginThreshold | read-write | current | This parameter allows the user to specify a threshold for triggering a retrain, if the downstream margin drops below the threshold. The offset range is between… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.9 | ColumnadslLineAnnexType | read-write | current | This parameter allows the user to specify the used ADSL Annex type. annexA (1): use annex A for related adsl interface, annexB (2): use annex B for related ads… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.10 | ColumnadslLineDyingGasp | read-write | current | This parameter controls the behavior when the dying gasp condition is detected. The dying gasp condition is detected when the power input falls below a certain… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.11 | ColumnadslLineBitSwapping | read-write | current | This parameter controls the behavior of up- and downstream bit swapping. Setting the bit enables the bit swapping in the corresponding direction. |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.13 | ColumnadslLineProfile | read-write | current | This parameter adapts the training behaviour, to comply with some special configurations used on some ADSL lines or during approval tests of their respective A… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.19 | ColumnadslLineCodingGainOffset | read-write | current | This parameter allows the user to control the Coding Gain of the CPE of the modem. The coding gain range is limited between 0dB and 7dB, a value of -1 lets the… |
| 1.3.6.1.4.1.13464.1.5.1.1.1.1.20 | ColumnadslLineModemCapabilities | read-only | current | This bitfield describes which open modes ADSL modem supports: annexA : The modem supports ADSL Annex A modes annexB : The modem supports ADSL Annex B modes mul… |
| 1.3.6.1.4.1.13464.1.5.1.1.2 | TableadslAtucPhysTable | not-accessible | current | This table provides one row for each ATUC. Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries wh… |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1 | RowadslAtucPhysEntry | not-accessible | current | An entry in the adslAtucPhysTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.1 | ColumnadslAtucIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.2 | ColumnadslAtucInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.3 | ColumnadslAtucInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.4 | ColumnadslAtucCurrStatus | read-only | current | Indicates mandatory state of the ATUC line, i.e. the state of the line as seen by ATUC. This is a bit-map of possible conditions. The various bit positions are… |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.5 | ColumnadslAtucCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.6 | ColumnadslAtucCurrAttainableRate | read-only | current | Indicates the maximum mandatoryly attainable data rate by the ATU. This value will be equal or greater than the mandatory line rate. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.7 | ColumnadslAtucCurrSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.8 | ColumnadslAtucCurrAtn | read-only | current | Measured difference between the total power transmitted by the peer ATU and the total power received by this ATU in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.2.1.9 | ColumnadslAtucCurrPowercutback | read-only | current | Indicates the powercutback by the ATU in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.3 | TableadslAturPhysTable | not-accessible | current | This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries whe… |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1 | RowadslAturPhysEntry | not-accessible | current | An entry in the adslAturPhysTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.1 | ColumnadslAturIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.2 | ColumnadslAturInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.3 | ColumnadslAturInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.4 | ColumnadslAturInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.5 | ColumnadslAturCurrSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.6 | ColumnadslAturCurrAtn | read-only | current | Measured difference between the total power transmitted by the peer ATU and the total power received by this ATU in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.7 | ColumnadslAturCurrStatus | read-only | current | Indicates mandatory state of the ATUR line, i.e. the state of the line as seen by ATUR. This is a bit-map of possible conditions. Due to the isolation of the A… |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.8 | ColumnadslAturCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.9 | ColumnadslAturCurrAttainableRate | read-write | current | Indicates the maximum mandatoryly attainable data rate by the ATU. This value will be equal or greater than the mandatory line rate. |
| 1.3.6.1.4.1.13464.1.5.1.1.3.1.10 | ColumnadslAturCurrPowercutback | read-only | current | Indicates the powercutback by the ATU in tenth dB. |
| 1.3.6.1.4.1.13464.1.5.1.1.4 | TableadslAtucChanTable | not-accessible | current | This table provides one row for each ATUC channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1 | RowadslAtucChanEntry | not-accessible | current | An entry in the adslAtucChanTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1.1 | ColumnadslAtucChanIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1.2 | ColumnadslAtucChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1.3 | ColumnadslAtucChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1.4 | ColumnadslAtucChanPrevTxRate | read-only | current | The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucTh… |
| 1.3.6.1.4.1.13464.1.5.1.1.4.1.5 | ColumnadslAtucChanInterleaveDepth | read-only | current | The interleaver depth. |
| 1.3.6.1.4.1.13464.1.5.1.1.5 | TableadslAturChanTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1 | RowadslAturChanEntry | not-accessible | current | An entry in the adslAturChanTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.1 | ColumnadslAturChanIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.2 | ColumnadslAturChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.3 | ColumnadslAturChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.4 | ColumnadslAturChanPrevTxRate | read-only | current | The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturTh… |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.5 | ColumnadslAturChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information. |
| 1.3.6.1.4.1.13464.1.5.1.1.5.1.6 | ColumnadslAturChanInterleaveDepth | read-only | current | The interleaver depth. |
| 1.3.6.1.4.1.13464.1.5.1.1.7 | TableadslAturPerfDataTable | not-accessible | current | This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1 | RowadslAturPerfDataEntry | not-accessible | current | An entry in adslAturPerfDataTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.1 | ColumnadslAturPerfIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.2 | ColumnadslAturPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.3 | ColumnadslAturPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.4 | ColumnadslAturPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.5 | ColumnadslAturPerfESs | read-only | current | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.6 | ColumnadslAturPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.7 | ColumnadslAturPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero excep… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.8 | ColumnadslAturPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.9 | ColumnadslAturPerfCurr15MinLofs | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.10 | ColumnadslAturPerfCurr15MinLoss | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.11 | ColumnadslAturPerfCurr15MinLprs | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.12 | ColumnadslAturPerfCurr15MinESs | read-only | current | Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomal… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.13 | ColumnadslAturPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.14 | ColumnadslAturPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.15 | ColumnadslAturPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.16 | ColumnadslAturPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.17 | ColumnadslAturPerfCurr1DayESs | read-only | current | Count of Errored Seconds during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second interva… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.18 | ColumnadslAturPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.19 | ColumnadslAturPerfPrev1DayLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.20 | ColumnadslAturPerfPrev1DayLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.21 | ColumnadslAturPerfPrev1DayLprs | read-only | current | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.7.1.22 | ColumnadslAturPerfPrev1DayESs | read-only | current | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.4.1.13464.1.5.1.1.11 | TableadslAturChanPerfDataTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1 | RowadslAturChanPerfDataEntry | not-accessible | current | An entry in adslAturChanPerfDataTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.1 | ColumnadslAturChanPerfIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.2 | ColumnadslAturChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.3 | ColumnadslAturChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.4 | ColumnadslAturChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.5 | ColumnadslAturChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.6 | ColumnadslAturChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.7 | ColumnadslAturChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero e… |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.8 | ColumnadslAturChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.9 | ColumnadslAturChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.10 | ColumnadslAturChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.11 | ColumnadslAturChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.12 | ColumnadslAturChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.13 | ColumnadslAturChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.14 | ColumnadslAturChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.15 | ColumnadslAturChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.16 | ColumnadslAturChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.17 | ColumnadslAturChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.18 | ColumnadslAturChanPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.19 | ColumnadslAturChanPerfPrev1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.20 | ColumnadslAturChanPerfPrev1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.21 | ColumnadslAturChanPerfPrev1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.11.1.22 | ColumnadslAturChanPerfPrev1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.12 | TableadslAtucPerfDataTable | not-accessible | current | This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1 | RowadslAtucPerfDataEntry | not-accessible | current | An entry in adslAtucPerfDataTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.1 | ColumnadslAtucPerfIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.2 | ColumnadslAtucPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.3 | ColumnadslAtucPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.4 | ColumnadslAtucPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.5 | ColumnadslAtucPerfESs | read-only | current | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.6 | ColumnadslAtucPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.7 | ColumnadslAtucPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero excep… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.8 | ColumnadslAtucPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.9 | ColumnadslAtucPerfCurr15MinLofs | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.10 | ColumnadslAtucPerfCurr15MinLoss | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.11 | ColumnadslAtucPerfCurr15MinLprs | read-only | current | Count of seconds in the mandatory 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.12 | ColumnadslAtucPerfCurr15MinESs | read-only | current | Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomal… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.13 | ColumnadslAtucPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.14 | ColumnadslAtucPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.15 | ColumnadslAtucPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.16 | ColumnadslAtucPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.17 | ColumnadslAtucPerfCurr1DayESs | read-only | current | Count of Errored Seconds during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second interva… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.18 | ColumnadslAtucPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.19 | ColumnadslAtucPerfPrev1DayLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.20 | ColumnadslAtucPerfPrev1DayLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.21 | ColumnadslAtucPerfPrev1DayLprs | read-only | current | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.12.1.22 | ColumnadslAtucPerfPrev1DayESs | read-only | current | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.4.1.13464.1.5.1.1.13 | TableadslAtucChanPerfDataTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1 | RowadslAtucChanPerfDataEntry | not-accessible | current | An entry in adslAtucChanPerfDataTable. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.1 | ColumnadslAtucChanPerfIfIndex | read-only | current | Specifies the ADSL interface index. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.2 | ColumnadslAtucChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.3 | ColumnadslAtucChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.4 | ColumnadslAtucChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.5 | ColumnadslAtucChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.6 | ColumnadslAtucChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.7 | ColumnadslAtucChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero e… |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.8 | ColumnadslAtucChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.9 | ColumnadslAtucChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.10 | ColumnadslAtucChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.11 | ColumnadslAtucChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.12 | ColumnadslAtucChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.13 | ColumnadslAtucChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the mandatory 1-day interval. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.14 | ColumnadslAtucChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.15 | ColumnadslAtucChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.16 | ColumnadslAtucChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.17 | ColumnadslAtucChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.18 | ColumnadslAtucChanPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.19 | ColumnadslAtucChanPerfPrev1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.20 | ColumnadslAtucChanPerfPrev1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.21 | ColumnadslAtucChanPerfPrev1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.1.1.13.1.22 | ColumnadslAtucChanPerfPrev1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.13464.1.5.250 | IdentityadslMIB | The MIB module defining objects for the management of a pair of ADSL modems at each end of the ADSL line. Each such line has an entry in an ifTable which may i… |