BIANCA-BRICK-ALIVE-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | Date HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.36 | Nodealive | |||
| 1.3.6.1.4.1.272.4.36.1 | TablealiveTable | not-accessible | mandatory | The aliveTable contains entries defining any kind of surveillance. It is a more general version of ipHostsAliveTable that only deals with reachability of hosts… |
| 1.3.6.1.4.1.272.4.36.1.1 | RowaliveEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.36.1.1.1 | ColumnaliveSurveillance | read-write | mandatory | Specifies what kind of event may trigger an alive entry. Being a generalisation of MIB table ipHostsAliveTable the latter table may be replaced by it. Possible… |
| 1.3.6.1.4.1.272.4.36.1.1.2 | ColumnaliveIfIndex | read-write | mandatory | The index of interface to monitor the operation status. Like referenced in the ifTable. Applicable for surveillance mode 'interface'. |
| 1.3.6.1.4.1.272.4.36.1.1.3 | ColumnaliveState | read-only | mandatory | The state of the watched entity. Possible values are 'unknown', 'up' or 'down'. This value is not used for surveillance mode 'brrp'. The default value is 'unkn… |
| 1.3.6.1.4.1.272.4.36.1.1.4 | ColumnaliveTrigger | read-write | mandatory | The variable trigger defines on change to what state (depending on the surveillance mode) the defined action is performed. Possible values are 'up' or 'down'. |
| 1.3.6.1.4.1.272.4.36.1.1.5 | ColumnaliveAction | read-write | mandatory | This action is performed upon status change of the respective entity to the given trigger condition. Possible actions are 'up', 'down' or 'none'. The default v… |
| 1.3.6.1.4.1.272.4.36.1.1.6 | ColumnaliveFirstIfIndex | read-write | mandatory | The first interface index affected by the action. This value is not used for surveillance mode 'brrp'. |
| 1.3.6.1.4.1.272.4.36.1.1.7 | ColumnaliveIfIndexRange | read-write | mandatory | A range of interface indexes affected by the action counted from aliveFirstIfIndex. Value '0' means that only interface aliveFirstIfIndex is affected. This val… |
| 1.3.6.1.4.1.272.4.36.1.1.8 | ColumnaliveTaskId | read-write | mandatory | The id of the task definition used exclusively for table sorting purposes (multiple instances are possible). The default value is 1. |
| 1.3.6.1.4.1.272.4.36.1.1.9 | ColumnaliveMasterProto | read-write | mandatory | The protocol used for interface keepalive monitoring. Possible values are: o brrp - monitoring via the Bintec Router Redundancy Protocol which is a derivate of… |
| 1.3.6.1.4.1.272.4.36.1.1.10 | ColumnaliveMasterVrId | read-write | mandatory | The id of the virtual router used for monitoring the interface. The associated BRRP configuration is stored in the biboBrrpOperTable. |
| 1.3.6.1.4.1.272.4.36.1.1.11 | ColumnaliveMasterBrrpState | read-write | mandatory | The operation state of the virtual router which triggers the specified action on the slave BRRP virtual router. The states 'initialize', 'backup' and 'master' … |
| 1.3.6.1.4.1.272.4.36.1.1.12 | ColumnaliveSlaveProto | read-write | mandatory | The protocol used for the slave (or backup) interface (or virtual router) keepalive operation status switching. o brrp - monitoring via the Bintec Router Redun… |
| 1.3.6.1.4.1.272.4.36.1.1.13 | ColumnaliveSlaveVrId | read-write | mandatory | The virtual router id used for interface admin status switching. The associated BRRP configuration is stored in the biboBrrpOperTable. |
| 1.3.6.1.4.1.272.4.36.1.1.14 | ColumnaliveSlaveBrrpState | read-write | mandatory | The admin state of the virtual router controlling the slave interface. down(1) up(2) master state according to the basic configuration found in the biboBrrpOpe… |
| 1.3.6.1.4.1.272.4.36.1.1.15 | ColumnaliveSlaveBrrpDecrPrio | read-write | mandatory | This value is used to decrement 'biboBrrpOperPriority' when virtual router state switches from 'up' to 'decrPrio' (see 'aliveSlaveBrrpState') It is used again … |