BIANCA-BRICK-CAPI-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | BitValue HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.7 | Nodecapi | |||
| 1.3.6.1.4.1.272.4.7.1 | TablecapiApplTable | not-accessible | mandatory | The capiApplTable contains information for all currently registered CAPI 1.1 and CAPI 2.0 applications, and their respective CAPI_REGISTER information. Creatin… |
| 1.3.6.1.4.1.272.4.7.1.1 | RowcapiApplEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.1.1.1 | ColumncapiApplNumber | read-only | mandatory | Identification number of the registered application. |
| 1.3.6.1.4.1.272.4.7.1.1.2 | ColumncapiApplVersion | read-only | mandatory | The version number of the registered application. |
| 1.3.6.1.4.1.272.4.7.1.1.3 | ColumncapiApplByteOrder | read-only | mandatory | The byte order used by the application. |
| 1.3.6.1.4.1.272.4.7.1.1.4 | ColumncapiApplRegLevel3Cnt | read-only | mandatory | CAPI_REGISTER: The number of level 3 connections this application accepts. |
| 1.3.6.1.4.1.272.4.7.1.1.5 | ColumncapiApplRegMsgCnt | read-only | mandatory | CAPI_REGISTER: The number of registered CAPI messages this application accepts. |
| 1.3.6.1.4.1.272.4.7.1.1.6 | ColumncapiApplRegDblkCnt | read-only | mandatory | CAPI_REGISTER: The number of registered B3 data blocks this application accepts. |
| 1.3.6.1.4.1.272.4.7.1.1.7 | ColumncapiApplRegDblkSize | read-only | mandatory | CAPI_REGISTER: The size of registered B3 data blocks this application accepts. |
| 1.3.6.1.4.1.272.4.7.1.1.8 | ColumncapiApplInfoStr | read-only | mandatory | Information string of CAPI instance: IP address and TCP port of connecting system and user name if any. |
| 1.3.6.1.4.1.272.4.7.2 | TablecapiListenTable | not-accessible | mandatory | The capiListenTable contains the listen settings for each CAPI application. Creating entries: Entries can only be created by the system and is performed automa… |
| 1.3.6.1.4.1.272.4.7.2.1 | RowcapiListenEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.2.1.1 | ColumncapiListenApplication | read-only | mandatory | The application-number (capiApplNumber). |
| 1.3.6.1.4.1.272.4.7.2.1.2 | ColumncapiListenController | read-only | mandatory | The ISDN controller number. This value refers to the isdnStkNumber. |
| 1.3.6.1.4.1.272.4.7.2.1.3 | ColumncapiListenServiceMask | read-only | mandatory | The bit mask of CAPI 1.1 listen services. Specifies which 1TR6 services to listen for (CAPI 1.1 only). |
| 1.3.6.1.4.1.272.4.7.2.1.4 | ColumncapiListenEazMask | read-only | mandatory | The bit mask of CAPI 1.1 listen-EAZs (CAPI 1.1 only). |
| 1.3.6.1.4.1.272.4.7.2.1.5 | ColumncapiListenInfoMask | read-only | mandatory | The bit mask of the CAPI 1.1/2.0 listen InfoMask setting. The purpose of infomask is to specify the type of information for a physical connection or controller… |
| 1.3.6.1.4.1.272.4.7.2.1.6 | ColumncapiListenCipMask | read-only | mandatory | The bit mask of CAPI 2.0 listen CIPMask. The purpose of the CIPMask parameter is to select basic classes of incoming calls. CAPI 2.0 applications only. |
| 1.3.6.1.4.1.272.4.7.2.1.7 | ColumncapiListenCipMask2 | read-only | mandatory | The bit mask of CAPI 2.0 listen CIPMask. |
| 1.3.6.1.4.1.272.4.7.3 | TablecapiPlciTable | not-accessible | mandatory | The capiPlciTable contains information for each currently connected CAPI application (i.e. has a Physical Link Connection Identifier associated with it). Creat… |
| 1.3.6.1.4.1.272.4.7.3.1 | RowcapiPlciEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.3.1.1 | ColumncapiPlciNumber | read-only | mandatory | The PLCI (physical link connection identifier) of the application. |
| 1.3.6.1.4.1.272.4.7.3.1.2 | ColumncapiPlciApplication | read-only | mandatory | The application-number (capiApplNumber). |
| 1.3.6.1.4.1.272.4.7.3.1.3 | ColumncapiPlciController | read-only | mandatory | The ISDN controller number. This value refers to the isdnStkNumber. |
| 1.3.6.1.4.1.272.4.7.3.1.4 | ColumncapiPlciState | read-only | mandatory | The current link state as described in the CAPI state diagram. |
| 1.3.6.1.4.1.272.4.7.3.1.5 | ColumncapiPlciSelectB2Proto | read-only | mandatory | The current B2 protocol setting (CAPI 1.1 applications only). |
| 1.3.6.1.4.1.272.4.7.3.1.6 | ColumncapiPlciSelectB2Dlpd | read-only | mandatory | Current B2 protocol descriptor. DLPD = data link protocol descriptor (CAPI 1.1 applications only). |
| 1.3.6.1.4.1.272.4.7.3.1.7 | ColumncapiPlciSelectB3Proto | read-only | mandatory | Current B3 protocol setting (CAPI 1.1 applications only). |
| 1.3.6.1.4.1.272.4.7.3.1.8 | ColumncapiPlciSelectB3Ncpd | read-only | mandatory | The current B3 Ncpd setting. NCPD = network control protocol descriptor (CAPI 1.1 applications only). |
| 1.3.6.1.4.1.272.4.7.3.1.9 | ColumncapiPlciB1Proto | read-only | mandatory | Current CAPI 2.0 B1 protocol setting. |
| 1.3.6.1.4.1.272.4.7.3.1.10 | ColumncapiPlciB1Config | read-only | mandatory | Current CAPI 2.0 B1 protocol configuration setting. |
| 1.3.6.1.4.1.272.4.7.3.1.11 | ColumncapiPlciB2Proto | read-only | mandatory | Current CAPI 2.0 B2 protocol setting. |
| 1.3.6.1.4.1.272.4.7.3.1.12 | ColumncapiPlciB2Config | read-only | mandatory | Current CAPI 2.0 B2 protocol configuration setting. |
| 1.3.6.1.4.1.272.4.7.3.1.13 | ColumncapiPlciB3Proto | read-only | mandatory | Current CAPI 2.0 B3 protocol setting. |
| 1.3.6.1.4.1.272.4.7.3.1.14 | ColumncapiPlciB3Config | read-only | mandatory | Current CAPI 2.0 B3 protocol configuration setting. |
| 1.3.6.1.4.1.272.4.7.3.1.15 | ColumncapiPlciCipValue | read-only | mandatory | The current CIPValue setting. |
| 1.3.6.1.4.1.272.4.7.3.1.16 | ColumncapiPlciInfoMask | read-only | mandatory | The current InfoMask setting. |
| 1.3.6.1.4.1.272.4.7.4 | TablecapiNcciTable | not-accessible | mandatory | The capiNcciTable contains information for each CAPI NCCI (network control connection identifier). An NCCI describes a logical connection on level 3. Several N… |
| 1.3.6.1.4.1.272.4.7.4.1 | RowcapiNcciEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.4.1.1 | ColumncapiNcciNumber | read-only | mandatory | The NCCI number assigned by the system. |
| 1.3.6.1.4.1.272.4.7.4.1.2 | ColumncapiNcciApplication | read-only | mandatory | The application number (capiApplNumber). |
| 1.3.6.1.4.1.272.4.7.4.1.3 | ColumncapiNcciPlci | read-only | mandatory | The CAPI PLCI number (capiPlciNumber). |
| 1.3.6.1.4.1.272.4.7.4.1.4 | ColumncapiNcciState | read-only | mandatory | The current state of the NCCI, as described in the CAPI state diagram. |
| 1.3.6.1.4.1.272.4.7.5 | TablecapiInfoTable | not-accessible | mandatory | The capiInfoTable contains the last 10 CAPI info codes and their message identifiers for where the error occured. The most recent message is at inx 09 with old… |
| 1.3.6.1.4.1.272.4.7.5.1 | RowcapiInfoEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.5.1.1 | ColumncapiInfoApplication | read-only | mandatory | The application number (capiApplNumber). |
| 1.3.6.1.4.1.272.4.7.5.1.2 | ColumncapiInfoPlci | read-only | mandatory | The CAPI PLCI number (capiPlciNumber). |
| 1.3.6.1.4.1.272.4.7.5.1.3 | ColumncapiInfoNcci | read-only | mandatory | The NCCI number (capiNcciNumber). |
| 1.3.6.1.4.1.272.4.7.5.1.4 | ColumncapiInfoC1Command | read-only | mandatory | The CAPI 1.1 command where the info occurred. |
| 1.3.6.1.4.1.272.4.7.5.1.5 | ColumncapiInfoC2Command | read-only | mandatory | The CAPI 2.0 command where the info occurred. |
| 1.3.6.1.4.1.272.4.7.5.1.6 | ColumncapiInfoSubCommand | read-only | mandatory | The CAPI 1.1/2.0 subcommand. |
| 1.3.6.1.4.1.272.4.7.5.1.7 | ColumncapiInfoNumber | read-only | mandatory | The info value as specified in the CAPI 1.1/2.0 specification. See the Software Reference Manual for a listing of CAPI 1.1 and CAPI 2.0 info values. |
| 1.3.6.1.4.1.272.4.7.6 | TablecapiConfigTable | not-accessible | mandatory | The capiConfigTable contains configuration information for each ISDN stack. Setting these fields is optional, and is not required. Creating entries: Entries ar… |
| 1.3.6.1.4.1.272.4.7.6.1 | RowcapiConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.6.1.1 | ColumncapiConfigStkNumber | read-only | mandatory | The isdnStkNumber this configuration belongs to. |
| 1.3.6.1.4.1.272.4.7.6.1.2 | ColumncapiConfigFaxG3RcvSpeed | read-write | mandatory | The G3 facsimile receive speed. For CM-EBRI this should be set to maximum. Set this field to `delete' to remove this entry. The entry can be deleted only if th… |
| 1.3.6.1.4.1.272.4.7.6.1.3 | ColumncapiConfigFaxG3ECM | read-write | mandatory | Specifies whether ECM (error correction mode) should be used for G3 facsimile transmissions. |
| 1.3.6.1.4.1.272.4.7.6.1.4 | ColumncapiConfigFaxG3Header | read-write | mandatory | Specifies whether the header-line and logo ('BIANCA/FAX'), should appear on outgoing facsimiles. The value 'logo_header' allows the header-line and the logo to… |
| 1.3.6.1.4.1.272.4.7.6.1.5 | ColumncapiConfigVoiceCoding | read-write | mandatory | Switches the bit order for voice-data. |
| 1.3.6.1.4.1.272.4.7.6.1.6 | ColumncapiConfigSendAlerting | read-write | mandatory | For CAPI 1.1 this specifies when the CAPI server should send alert messages for incoming calls. |
| 1.3.6.1.4.1.272.4.7.6.1.7 | ColumncapiConfigV42bis | read-write | mandatory | Specifies whether V.42bis data compression should be used. If data compression is activated here,the receiving or sending side is first queried whether it supp… |
| 1.3.6.1.4.1.272.4.7.6.1.8 | ColumncapiConfigModemDefault | read-write | mandatory | Specifies the modem profile of the mdmProfileTable which contains the default modem parameters to use for modem connections. |
| 1.3.6.1.4.1.272.4.7.6.1.9 | ColumncapiConfigFaxModulation | read-write | mandatory | Set the default transmission protocol for fax. - v17 max. 14400 Bps new standard - v33 max. 14000 Bps early standard - v29 max. 9600 Bps fax standard - v17s v1… |
| 1.3.6.1.4.1.272.4.7.6.1.10 | ColumncapiConfigFax12000 | read-write | mandatory | Enable or disable the 12000Bps Mode for fax transmission. A lot of fax receivers have problems with this tranmission mode. Default value is off |
| 1.3.6.1.4.1.272.4.7.6.1.11 | ColumncapiConfigFaxTXLevel | read-write | mandatory | Set the transmit level to -x dB db0 = 0dB, db3 = -3dB. In Germany -6dB (db6) is normally used for facsimile transmission. |
| 1.3.6.1.4.1.272.4.7.7 | TablecapiMultiControllerTable | not-accessible | mandatory | This table contains mappings between controller numbers used by CAPI applications and the ISDN stacks available on the BRICK (i.e., the Number field of the isd… |
| 1.3.6.1.4.1.272.4.7.7.1 | RowcapiMultiControllerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.7.7.1.1 | ColumncapiControllerNumber | read-write | mandatory | The controller number requested by the CAPI application. |
| 1.3.6.1.4.1.272.4.7.7.1.2 | ColumncapiControllerStkMask | read-write | mandatory | This binary number defines the ISDN stack(s) to use for the specified CAPI 1.1 or CAPI 2.0 applications. For example; `Number=1 StkMask=0b1111 Version=capi20' … |
| 1.3.6.1.4.1.272.4.7.7.1.3 | ColumncapiControllerVersion | read-write | mandatory | Specifies which CAPI applications (CAPI version 1.1, or 2.0) this entry applies to. Set this field to `delete' to delete this entry. |
| 1.3.6.1.4.1.272.4.7.9 | ScalarcapiAdminStatus | read-write | mandatory | Enable or disable CAPI |
| 1.3.6.1.4.1.272.4.7.10 | ScalarcapiTcpNoDelay | read-write | mandatory | Enable or Disable TCP Nagle Algorithm for CAPI. disable: Normal operation with Nagle support. enable : Disable Nagle TCP Algorithm. Enable TcpNoDelay increases… |
| 1.3.6.1.4.1.272.4.7.11 | ScalarcapiFaxG3Header | read-write | mandatory | Specifies whether the header-line and logo ('BIANCA/FAX'), should appear on outgoing facsimiles. The value 'logo_header' allows the header-line and the logo to… |
| 1.3.6.1.4.1.272.4.7.12 | ScalarcapiX25DefWinSize | read-write | mandatory | Specifies the X.25 default Windowsize used in ISO8208 (X.25 DTE <-> DTE) Filetransferprotocol. Applications such as OFTP normally uses 7 but some Applications … |