BIANCA-BRICK-HDSL2SHDSL2-MIB
81 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.35 | Nodehdsl2shdsl | |||
| 1.3.6.1.4.1.272.4.35.1 | Nodehdsl2ShdslLineMib | |||
| 1.3.6.1.4.1.272.4.35.1.1 | Nodehdsl2ShdslMibObjects | |||
| 1.3.6.1.4.1.272.4.35.1.1.3 | Tablehdsl2ShdslInventoryTable | not-accessible | mandatory | This table supports retrieval of unit inventory information available via the EOC from units in a HDSL2/SHDSL line. Entries in this table are dynamically creat… |
| 1.3.6.1.4.1.272.4.35.1.1.3.1 | Rowhdsl2ShdslInventoryEntry | not-accessible | mandatory | An entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in a HDSL2/SHDSL line. It is indexed by the ifIndex of … |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.1 | Columnhdsl2ShdslInvIfIndex | read-only | mandatory | This object specifies the associated interface index of this HDSL2/SHDSL line. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.2 | Columnhdsl2ShdslInvIndex | read-only | mandatory | Each entry in this table corresponds to a physical element in a HDSL2/SHDSL Span. It is based on the EOC unit addressing scheme with reference to the xtuC. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.3 | Columnhdsl2ShdslInvVendorID | read-only | mandatory | Vendor ID as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.4 | Columnhdsl2ShdslInvVendorModelNumber | read-only | mandatory | Vendor model number as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.5 | Columnhdsl2ShdslInvVendorSerialNumber | read-only | mandatory | Vendor serial number as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.6 | Columnhdsl2ShdslInvVendorEOCSoftwareVersion | read-only | mandatory | Vendor EOC version as reported in a Discovery Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.7 | Columnhdsl2ShdslInvStandardVersion | read-only | mandatory | Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.8 | Columnhdsl2ShdslInvVendorListNumber | read-only | mandatory | Vendor list number as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.9 | Columnhdsl2ShdslInvVendorIssueNumber | read-only | mandatory | Vendor issue number as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.10 | Columnhdsl2ShdslInvVendorSoftwareVersion | read-only | mandatory | Vendor software version as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.11 | Columnhdsl2ShdslInvEquipmentCode | read-only | mandatory | Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.12 | Columnhdsl2ShdslInvVendorOther | read-only | mandatory | Other vendor information as reported in an Inventory Response message. |
| 1.3.6.1.4.1.272.4.35.1.1.3.1.13 | Columnhdsl2ShdslInvTransmissionModeCapability | read-only | mandatory | Contains the transmission mode capability of the SHDSL unit: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B |
| 1.3.6.1.4.1.272.4.35.1.1.4 | Tablehdsl2ShdslEndpointConfTable | not-accessible | mandatory | This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persi… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1 | Rowhdsl2ShdslEndpointConfEntry | not-accessible | mandatory | An entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/S… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.1 | Columnhdsl2ShdslEndpointConfIfIndex | read-only | mandatory | This object specifies the associated interface index of this HDSL2/SHDSL line. |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.2 | Columnhdsl2ShdslEndpointConfSide | read-write | mandatory | The side of the unit associated with this segment endpoint - Network/Customer side - as per the Hdsl2ShdslUnitSide textual convention. |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.5 | Columnhdsl2ShdslEndpointConfWireInterface | read-write | mandatory | This object configures the bonding mode of the SHDSL Line. twoWire(1) : no bonding is used fourWire(2) : four-wire mode fourWireStandard(3) : four-wire mode, d… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.6 | Columnhdsl2ShdslEndpointConfMinLineRate | read-write | mandatory | This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line r… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.7 | Columnhdsl2ShdslEndpointConfMaxLineRate | read-write | mandatory | This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line r… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.8 | Columnhdsl2ShdslEndpointConfTransmissionMode | read-write | mandatory | This object specifies the regional setting for the SHDSL line: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.11 | Columnhdsl2ShdslEndpointConfWorstCaseTargetMarginDown | read-write | mandatory | This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.13 | Columnhdsl2ShdslEndpointConfWorstCaseTargetMarginUp | read-write | mandatory | This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. … |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.14 | Columnhdsl2ShdslEndpointConfGroupId | read-write | mandatory | This object defines which wire-pairs belong to the same M-pair group or IMA group. Members of the same group have the same entry. |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.15 | Columnhdsl2ShdslEndpointConfLineProbeEnable | read-write | mandatory | This object specifies the configuration of the PMMS behavior: auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate < hdsl2ShdslEndpointConfMaxLine… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.16 | Columnhdsl2ShdslEndpointConfLicenseUsage | read-only | mandatory | Shows which license type is currently used for this SHDSL interface. |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.17 | Columnhdsl2ShdslEndpointConfPamMode | read-write | mandatory | This object specifies which modulation modes are allowed for this wire pair. 16 - 16-TCPAM, used for Annex A,B and F,G. 32 - 32-TCPAM, used for Annex F,G only.… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.18 | Columnhdsl2ShdslEndpointConfTotalMinLineRate | read-write | mandatory | This object configures the minimum transmission rate in bits-per-second (bps) for the associated SHDSL bundle. The associated interfaces go up only when the su… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.19 | Columnhdsl2ShdslEndpointConfMinWirePairs | read-write | mandatory | This object configures the minimum number of wire pairs for the associated SHDSL bundle. The associated interfaces go up only when at least the specified numbe… |
| 1.3.6.1.4.1.272.4.35.1.1.4.1.20 | Columnhdsl2ShdslEndpointConfCapListStyle | read-write | mandatory | This object specifies the data format of the capability list, that is exchanged during the G.994.1 handshake: auto - automatic detection of the used capability… |
| 1.3.6.1.4.1.272.4.35.1.1.5 | Tablehdsl2ShdslEndpointCurrTable | not-accessible | mandatory | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex,… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1 | Rowhdsl2ShdslEndpointCurrEntry | not-accessible | mandatory | An entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.1 | Columnhdsl2ShdslEndpointCurrIfIndex | read-only | mandatory | This object specifies the associated interface index of this HDSL2/SHDSL line. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.2 | Columnhdsl2ShdslEndpointCurrReceivedBlks | read-only | mandatory | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.3 | Columnhdsl2ShdslEndpointCurrTransmittedBlks | read-only | mandatory | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.4 | Columnhdsl2ShdslEndpointCurrCorrectedBlks | read-only | mandatory | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.5 | Columnhdsl2ShdslEndpointCurrUncorrectBlks | read-only | mandatory | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.6 | Columnhdsl2ShdslEndpointCurrAtn | read-only | mandatory | The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.7 | Columnhdsl2ShdslEndpointCurrSnrMgn | read-only | mandatory | The current SNR margin for this endpoint as reported in a Status Response/SNR message. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.8 | Columnhdsl2ShdslEndpointCurrStatus | read-only | mandatory | Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powe… |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.9 | Columnhdsl2ShdslEndpointES | read-only | mandatory | Count of Errored Seconds (ES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.10 | Columnhdsl2ShdslEndpointSES | read-only | mandatory | Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.11 | Columnhdsl2ShdslEndpointCRCanomalies | read-only | mandatory | Count of CRC anomalies on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.12 | Columnhdsl2ShdslEndpointLOSWS | read-only | mandatory | Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.13 | Columnhdsl2ShdslEndpointUAS | read-only | mandatory | Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.14 | Columnhdsl2ShdslEndpointCurr15MinReceivedBlks | read-only | mandatory | Count of all encoded blocks received on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.15 | Columnhdsl2ShdslEndpointCurr15MinTransmittedBlks | read-only | mandatory | Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.16 | Columnhdsl2ShdslEndpointCurr15MinCorrectedBlks | read-only | mandatory | Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.17 | Columnhdsl2ShdslEndpointCurr15MinUncorrectBlks | read-only | mandatory | Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.18 | Columnhdsl2ShdslEndpointCurr15MinTimeElapsed | read-only | mandatory | Total elapsed seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.19 | Columnhdsl2ShdslEndpointCurr15MinES | read-only | mandatory | Count of Errored Seconds (ES) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.20 | Columnhdsl2ShdslEndpointCurr15MinSES | read-only | mandatory | Count of Severely Errored Seconds (SES) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.21 | Columnhdsl2ShdslEndpointCurr15MinCRCanomalies | read-only | mandatory | Count of CRC anomalies in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.22 | Columnhdsl2ShdslEndpointCurr15MinLOSWS | read-only | mandatory | Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.23 | Columnhdsl2ShdslEndpointCurr15MinUAS | read-only | mandatory | Count of Unavailable Seconds (UAS) in the current 15-minute interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.24 | Columnhdsl2ShdslEndpointCurr1DayReceivedBlks | read-only | mandatory | Count of all encoded blocks received on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.25 | Columnhdsl2ShdslEndpointCurr1DayTransmittedBlks | read-only | mandatory | Count of all encoded blocks transmitted on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.26 | Columnhdsl2ShdslEndpointCurr1DayCorrectedBlks | read-only | mandatory | Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.27 | Columnhdsl2ShdslEndpointCurr1DayUncorrectBlks | read-only | mandatory | Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.28 | Columnhdsl2ShdslEndpointCurr1DayTimeElapsed | read-only | mandatory | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.29 | Columnhdsl2ShdslEndpointCurr1DayES | read-only | mandatory | Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.30 | Columnhdsl2ShdslEndpointCurr1DaySES | read-only | mandatory | Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.31 | Columnhdsl2ShdslEndpointCurr1DayCRCanomalies | read-only | mandatory | Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.32 | Columnhdsl2ShdslEndpointCurr1DayLOSWS | read-only | mandatory | Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.5.1.33 | Columnhdsl2ShdslEndpointCurr1DayUAS | read-only | mandatory | Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.272.4.35.1.1.10 | Tablehdsl2ShdslSpanConfProfileTable | not-accessible | mandatory | This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintain… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1 | Rowhdsl2ShdslSpanConfProfileEntry | not-accessible | mandatory | Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a … |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.1 | Columnhdsl2ShdslSpanConfProfileName | read-only | mandatory | This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanCo… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.2 | Columnhdsl2ShdslSpanConfWireInterface | read-write | mandatory | This object configures the bonding mode of the SHDSL Line. twoWire(1) : no bonding is used fourWire(2) : four-wire mode fourWireStandard(3) : four-wire mode, d… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.3 | Columnhdsl2ShdslSpanConfMinLineRate | read-write | mandatory | This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line r… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.4 | Columnhdsl2ShdslSpanConfMaxLineRate | read-write | mandatory | This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line r… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.6 | Columnhdsl2ShdslSpanConfTransmissionMode | read-write | mandatory | This object specifies the regional setting for the SHDSL line: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.10 | Columnhdsl2ShdslSpanConfWorstCaseTargetMarginDown | read-write | mandatory | This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR… |
| 1.3.6.1.4.1.272.4.35.1.1.10.1.12 | Columnhdsl2ShdslSpanConfWorstCaseTargetMarginUp | read-write | mandatory | This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. … |