BIANCA-BRICK-IMA-MIB
19 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | ima |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| RFC1213-MIB | PhysAddress |
| SNMPv2-SMI | Integer32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1 | TableimaGroupTable | not-accessible | current | The IMA Group Configuration table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1 | RowimaGroupEntry | not-accessible | current | An entry in the IMA Group table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.1 | ColumnimaGroupIndex | read-only | current | A unique value for the IMA Group. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.7 | ColumnimaGroupSymmetry | read-create | current | Symmetry of the IMA group. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.8 | ColumnimaGroupMinNumTxLinks | read-create | current | Minimum number of transmit links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.9 | ColumnimaGroupMinNumRxLinks | read-create | current | Minimum number of receive links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.17 | ColumnimaGroupTxFrameLength | read-create | current | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.19 | ColumnimaGroupDiffDelayMax | read-create | current | The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.22 | ColumnimaGroupAlphaValue | read-create | current | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sy… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.23 | ColumnimaGroupBetaValue | read-create | current | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Syn… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.24 | ColumnimaGroupGammaValue | read-create | current | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreS… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.25 | ColumnimaGroupErrorsLinkDown | read-create | current | This indicates the threshold of the number of ATM header errors per 100000 ATM cells, at which a link is inhibited. The number is compared with average value o… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.26 | ColumnimaGroupErrorIntervalLinkDown | read-create | current | This indicates the duration of the measure interval in seconds for the ATM header error counter. That is used for calculating an average, which is then compare… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.27 | ColumnimaGroupErrorsLinkUp | read-create | current | This indicates the threshold of the number of ATM header errors per 100000 ATM cells, at which a link is enabled again. The number is compared with average val… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.28 | ColumnimaGroupErrorIntervalLinkUp | read-create | current | This indicates the duration of the measure interval in seconds for the ATM header error counter. That is used for calculating an average, which is then compare… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.19.1.1.29 | ColumnimaGroupMinLinkDownTime | read-create | current | This indicates the minimum waiting time in seconds before a link can be enabled again, after it has been inhibited. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ImaFrameLength | INTEGER { m32(32), m64(64), m128(128), m256(256) } | current | Length of the IMA frames. |
| ImaGroupSymmetry | INTEGER { symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3) } | current | The group symmetry mode adjusted during the group start-up. |
| MilliSeconds | Integer32 | current | Time in milliseconds |