BIANCA-BRICK-L2TP-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.23 | Nodevpn | |||
| 1.3.6.1.4.1.272.4.23.8 | Nodel2tp | |||
| 1.3.6.1.4.1.272.4.23.8.10 | Nodel2tpGlobals | |||
| 1.3.6.1.4.1.272.4.23.8.10.10 | Scalarl2tpGlobUdpPort | read-write | mandatory | The UDP port which is monitored by L2TP for tunnel establishment requests received from remote hosts. |
| 1.3.6.1.4.1.272.4.23.8.10.20 | Scalarl2tpGlobPortUsage | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.23.8.20 | Tablel2tpTunnelProfileTable | not-accessible | mandatory | This table contains profile information for L2TP tunnels. |
| 1.3.6.1.4.1.272.4.23.8.20.10 | Rowl2tpTunnelProfileEntry | not-accessible | mandatory | An entry in the l2tpTunnelProfileTable. |
| 1.3.6.1.4.1.272.4.23.8.20.10.10 | Columnl2tpTunnelProfileIndex | read-write | mandatory | The unique index for this entry. |
| 1.3.6.1.4.1.272.4.23.8.20.10.15 | Columnl2tpTunnelProfileName | read-write | mandatory | The friendly name for this entry. |
| 1.3.6.1.4.1.272.4.23.8.20.10.20 | Columnl2tpTunnelProfileRemoteIpAddress | read-write | mandatory | The main remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and th… |
| 1.3.6.1.4.1.272.4.23.8.20.10.25 | Columnl2tpTunnelProfileRemoteIpAddressBackup | read-write | mandatory | The backup remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and … |
| 1.3.6.1.4.1.272.4.23.8.20.10.30 | Columnl2tpTunnelProfileRemoteUdpPort | read-write | mandatory | The remote UDP port number for the tunnel. Only meaningful in LAC mode. |
| 1.3.6.1.4.1.272.4.23.8.20.10.40 | Columnl2tpTunnelProfileRemoteHostname | read-write | mandatory | The name of the remote host. Use an empty string for default profile. |
| 1.3.6.1.4.1.272.4.23.8.20.10.50 | Columnl2tpTunnelProfileLocalIpAddress | read-write | mandatory | The local IP address for the tunnel. If this value is set to 0, the IP address of the egress interface will be used in outgoing L2TP packets. |
| 1.3.6.1.4.1.272.4.23.8.20.10.60 | Columnl2tpTunnelProfileLocalUdpPort | read-write | mandatory | The local UDP port number for the tunnel. Only meaningful in LAC mode. If this value is set to 0 (zero), the port number is allocated dynamically. |
| 1.3.6.1.4.1.272.4.23.8.20.10.70 | Columnl2tpTunnelProfileLocalHostname | read-write | mandatory | The name of the local host. |
| 1.3.6.1.4.1.272.4.23.8.20.10.80 | Columnl2tpTunnelProfilePassword | read-write | mandatory | The password used for tunnel authentication. |
| 1.3.6.1.4.1.272.4.23.8.20.10.90 | Columnl2tpTunnelProfileReceiveWindowSize | read-write | mandatory | The received window size used by L2TP on the local side of this tunnel. Currently, the only supported value is 1. |
| 1.3.6.1.4.1.272.4.23.8.20.10.100 | Columnl2tpTunnelProfileHelloInterval | read-write | mandatory | The interval in seconds between two consecutive hello requests sent by L2TP during the tunnel life. If this object is set to 0 (zero), no hello requests are se… |
| 1.3.6.1.4.1.272.4.23.8.20.10.110 | Columnl2tpTunnelProfileSessionDataSequencing | read-write | mandatory | This object specifies if sequence numbers are used on the data channel of sessions supported by this tunnel. Additionally, if this object is set to delete (1),… |
| 1.3.6.1.4.1.272.4.23.8.20.10.120 | Columnl2tpTunnelProfileMinRetryTime | read-write | mandatory | The initial interval in seconds between two consecutive attempts to send an L2TP control packet. The value of this interval is doubled with each new attempt, u… |
| 1.3.6.1.4.1.272.4.23.8.20.10.130 | Columnl2tpTunnelProfileMaxRetryTime | read-write | mandatory | The maximum interval in seconds between two consecutive attempts to send an L2TP control packet. |
| 1.3.6.1.4.1.272.4.23.8.20.10.140 | Columnl2tpTunnelProfileMaxRetries | read-write | mandatory | The maximum number of retries to send an L2TP control packet. The total number of attempts will be one more than this value. |
| 1.3.6.1.4.1.272.4.23.8.20.10.150 | Columnl2tpTunnelProfileRadiusAssignment | read-write | mandatory | This object enables/disables the use of Radius for requesting main and backup remote IP addresses. Only meaningful in LAC mode. |
| 1.3.6.1.4.1.272.4.23.8.20.10.160 | Columnl2tpTunnelProfileRadiusGroupId | read-write | mandatory | Determines the logical RADIUS server group to be addressed for sending the RADIUS Access-Request messages. Only meaningful in LAC mode. See also radiusSrvGroup… |
| 1.3.6.1.4.1.272.4.23.8.30 | Tablel2tpTunnelTable | not-accessible | mandatory | This table contains information for L2TP tunnels. |
| 1.3.6.1.4.1.272.4.23.8.30.10 | Rowl2tpTunnelEntry | not-accessible | mandatory | Entries in this table are created by the system. |
| 1.3.6.1.4.1.272.4.23.8.30.10.10 | Columnl2tpTunnelRemoteIpAddress | read-only | mandatory | The remote IP address for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.20 | Columnl2tpTunnelRemoteUdpPort | read-only | mandatory | The remote UDP port number for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.30 | Columnl2tpTunnelRemoteTunnelId | read-only | mandatory | The ID used by the remote end for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.35 | Columnl2tpTunnelRemoteReceiveWindowSize | read-only | mandatory | The receive window size used by L2TP on the remote side of this tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.40 | Columnl2tpTunnelRemoteHostname | read-only | mandatory | The name of the remote host. |
| 1.3.6.1.4.1.272.4.23.8.30.10.50 | Columnl2tpTunnelRemoteVendorName | read-only | mandatory | The vendor name of the remote host L2TP layer. |
| 1.3.6.1.4.1.272.4.23.8.30.10.60 | Columnl2tpTunnelLocalIpAddress | read-only | mandatory | The local IP address for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.70 | Columnl2tpTunnelLocalUdpPort | read-only | mandatory | The local UDP port number for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.80 | Columnl2tpTunnelLocalTunnelId | read-only | mandatory | The ID used by the local end for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.85 | Columnl2tpTunnelLocalReceiveWindowSize | read-only | mandatory | The receive window size used by L2TP on the local side of this tunnel. Currently, the only supported value is 1. |
| 1.3.6.1.4.1.272.4.23.8.30.10.90 | Columnl2tpTunnelLocalHostname | read-only | mandatory | The name of the local host. |
| 1.3.6.1.4.1.272.4.23.8.30.10.100 | Columnl2tpTunnelPassword | read-only | mandatory | The password used for tunnel authentication. |
| 1.3.6.1.4.1.272.4.23.8.30.10.120 | Columnl2tpTunnelHelloInterval | read-write | mandatory | The interval in seconds between two consecutive hello requests sent by L2TP during the tunnel life. If this object is set to 0 (zero), no hello requests are se… |
| 1.3.6.1.4.1.272.4.23.8.30.10.130 | Columnl2tpTunnelSessionDataSequencing | read-write | mandatory | This object specifies if sequence numbers are used on the data channel of sessions supported by this tunnel. |
| 1.3.6.1.4.1.272.4.23.8.30.10.140 | Columnl2tpTunnelMinRetryTime | read-write | mandatory | The initial interval in seconds between two consecutive attempts to send an L2TP control packet. The value of this interval is doubled with each new attempt, u… |
| 1.3.6.1.4.1.272.4.23.8.30.10.150 | Columnl2tpTunnelMaxRetryTime | read-write | mandatory | The maximum interval in seconds between two consecutive attempts to send an L2TP control packet. |
| 1.3.6.1.4.1.272.4.23.8.30.10.160 | Columnl2tpTunnelMaxRetries | read-write | mandatory | The maximum number of retries to send an L2TP control packet. The total number of attempts will be one more than this value. |
| 1.3.6.1.4.1.272.4.23.8.30.10.170 | Columnl2tpTunnelState | read-write | mandatory | The current state of the tunnel as specified in RFC2661. Selecting shutdown(5) value results in tunnel hangup. Any other value is ignored. |
| 1.3.6.1.4.1.272.4.23.8.40 | Tablel2tpSessionTable | not-accessible | mandatory | This Table contains information for L2TP sessions. |
| 1.3.6.1.4.1.272.4.23.8.40.10 | Rowl2tpSessionEntry | not-accessible | mandatory | Entries in this table are created by the system. |
| 1.3.6.1.4.1.272.4.23.8.40.10.10 | Columnl2tpSessionRemoteIpAddress | read-only | mandatory | The remote IP address for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.20 | Columnl2tpSessionRemoteUdpPort | read-only | mandatory | The remote UDP port number for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.30 | Columnl2tpSessionRemoteTunnelId | read-only | mandatory | The ID used by the remote end for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.40 | Columnl2tpSessionRemoteSessionId | read-only | mandatory | The ID used by the remote end for the session. |
| 1.3.6.1.4.1.272.4.23.8.40.10.50 | Columnl2tpSessionRemoteHostname | read-only | mandatory | The name of the remote host. |
| 1.3.6.1.4.1.272.4.23.8.40.10.60 | Columnl2tpSessionLocalIpAddress | read-only | mandatory | The local IP address for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.70 | Columnl2tpSessionLocalUdpPort | read-only | mandatory | The local UDP port number for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.80 | Columnl2tpSessionLocalTunnelId | read-only | mandatory | The ID used by the local end for the tunnel. |
| 1.3.6.1.4.1.272.4.23.8.40.10.90 | Columnl2tpSessionLocalSessionId | read-only | mandatory | The ID used by the local end for the session. |
| 1.3.6.1.4.1.272.4.23.8.40.10.100 | Columnl2tpSessionLocalHostname | read-only | mandatory | The name of the local host. |
| 1.3.6.1.4.1.272.4.23.8.40.10.110 | Columnl2tpSessionCallSerialNumber | read-only | mandatory | The call serial number for the session. |
| 1.3.6.1.4.1.272.4.23.8.40.10.120 | Columnl2tpSessionDataSequencing | read-write | mandatory | This object specifies if sequence numbers are used on the data channel of the session. |
| 1.3.6.1.4.1.272.4.23.8.40.10.130 | Columnl2tpSessionState | read-write | mandatory | The current state of the session as specified in RFC2661. Selecting shutdown(7) value results in session hangup. Any other value is ignored. |
| 1.3.6.1.4.1.272.4.23.8.40.10.140 | Columnl2tpSessionInfo | read-only | mandatory | Info on the state of the session. |
| 1.3.6.1.4.1.272.4.23.8.40.10.150 | Columnl2tpSessionClientPPPCrcErrors | read-only | mandatory | The number of PPP CRC errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |
| 1.3.6.1.4.1.272.4.23.8.40.10.160 | Columnl2tpSessionClientPPPFramingErrors | read-only | mandatory | The number of PPP framing errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |
| 1.3.6.1.4.1.272.4.23.8.40.10.170 | Columnl2tpSessionClientPPPHardwareOverruns | read-only | mandatory | The number of PPP hardware overruns detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |
| 1.3.6.1.4.1.272.4.23.8.40.10.180 | Columnl2tpSessionClientPPPBufferOverruns | read-only | mandatory | The number of PPP buffer overruns detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |
| 1.3.6.1.4.1.272.4.23.8.40.10.190 | Columnl2tpSessionClientPPPTimeoutErrors | read-only | mandatory | The number of PPP timeout errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |
| 1.3.6.1.4.1.272.4.23.8.40.10.200 | Columnl2tpSessionClientPPPAlignmentErrors | read-only | mandatory | The number of PPP alignment errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode. |