BIANCA-BRICK-MIB
159 objects
MIB module for vendor specific box definitions. Note: bibo stands for BinTec box stemming from the times where the company was still called BinTec.
Imported Objects
| BINTEC-MIB MISSING | bibo bintec Date HexValue sys |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-MIB | sysDescr sysName |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.1 | Nodeadmin | |||
| 1.3.6.1.4.1.272.4.1.8 | ScalarbiboAdmIpAddr | read-write | current | Local IP address. If this object is set, it's value will be used as the source address for all IP packets that are sent. Otherwise, the IP address used will be… |
| 1.3.6.1.4.1.272.4.1.10 | TablebiboAdmTrapHostTable | not-accessible | current | The biboAdmTrapHostTable defines where traps are sent (i.e., which hosts). If the table is empty traps are broadcasted. Creating entries: Entries are added by … |
| 1.3.6.1.4.1.272.4.1.10.1 | RowbiboAdmTrapHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.10.1.1 | ColumnbiboAdmTrapHostAddr | read-write | current | Ip-Address where traps are sent. |
| 1.3.6.1.4.1.272.4.1.10.1.2 | ColumnbiboAdmTrapHostStatus | read-write | current | Status is always valid, and set to delete only to discard the whole entry. |
| 1.3.6.1.4.1.272.4.1.11 | ScalarbiboAdmSyslogMaxEntries | read-write | current | Maximum Number of syslog messages stored in memory. |
| 1.3.6.1.4.1.272.4.1.12 | TablebiboAdmSyslogTable | not-accessible | current | The biboAdmSyslogTable keeps track of syslog messages received. The size of the table (number of entries), is limited by the value of biboAdmSyslogMaxEntries. … |
| 1.3.6.1.4.1.272.4.1.12.1 | RowbiboAdmSyslogEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.12.1.1 | ColumnbiboAdmSyslogTimeStamp | read-only | current | Time message was generated. |
| 1.3.6.1.4.1.272.4.1.12.1.2 | ColumnbiboAdmSyslogLevel | read-only | current | Level of syslog message. |
| 1.3.6.1.4.1.272.4.1.12.1.4 | ColumnbiboAdmSyslogMessage | read-only | current | The text of the syslog message. |
| 1.3.6.1.4.1.272.4.1.12.1.5 | ColumnbiboAdmSyslogSubject | read-only | current | Subject of the syslog message. |
| 1.3.6.1.4.1.272.4.1.13 | TablebiboAdmLogHostTable | not-accessible | current | The biboAdmLogHostTable lists hosts which are to receive syslog messages. This table also defines which types and levels of messages to send. Creating entries:… |
| 1.3.6.1.4.1.272.4.1.13.1 | RowbiboAdmLogHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.13.1.1 | ColumnbiboAdmLogHostAddr | read-write | current | Ip-Address where syslog messages are sent. If the facility is set to memory or console, this field is not used. |
| 1.3.6.1.4.1.272.4.1.13.1.2 | ColumnbiboAdmLogHostLevel | read-write | current | Priorities lower or equal this level are sent to loghost. The delete priority is used to discard the whole entry. |
| 1.3.6.1.4.1.272.4.1.13.1.4 | ColumnbiboAdmLogHostFacility | read-write | current | The facility used for the syslog messages being generated. |
| 1.3.6.1.4.1.272.4.1.13.1.5 | ColumnbiboAdmLogHostType | read-write | current | The subject of the messages that are to be generated. system means all subjects except accounting, all means all subjects. |
| 1.3.6.1.4.1.272.4.1.13.1.6 | ColumnbiboAdmLogHostTimestamp | read-write | current | This object describes the format of the timestamp. none(1) = no timestamp, time(2) = only time is printed, all(3) = date and time is printed. |
| 1.3.6.1.4.1.272.4.1.13.1.7 | ColumnbiboAdmLogHostMethod | read-write | current | This object provides protocol for sending syslog messages: udp(1) = udp tcp(2) = tcp |
| 1.3.6.1.4.1.272.4.1.14 | TablebiboAdmConfigTable | not-accessible | current | The biboAdmConfigTable is used for assigning parameters for managing configuration files. Creating entries: Entries are added to this table by assigning a valu… |
| 1.3.6.1.4.1.272.4.1.14.1 | RowbiboAdmConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.14.1.1 | ColumnbiboAdmConfigCmd | read-write | current | Command for configuration handling. Possible values are : save(1) = save configuration (to FLASH) load(2) = load configuration (from FLASH) put(3) = write conf… |
| 1.3.6.1.4.1.272.4.1.14.1.2 | ColumnbiboAdmConfigObject | read-write | current | Table object id (OID) to save/load. If this field is set, only this table is saved/loaded. Otherwise all tables are saved/loaded. |
| 1.3.6.1.4.1.272.4.1.14.1.3 | ColumnbiboAdmConfigPath | read-write | current | NAme of the configuration file in flash memory to save/load. |
| 1.3.6.1.4.1.272.4.1.14.1.4 | ColumnbiboAdmConfigPathNew | read-write | current | New name of configuration file in flash memory to move/copy |
| 1.3.6.1.4.1.272.4.1.14.1.5 | ColumnbiboAdmConfigHost | read-write | current | TFTP host's IP address to send/receive the file to/from. The configuration is transfered directly from flash memory (biboAdmConfigPath) to TFTP-file (biboAdmCo… |
| 1.3.6.1.4.1.272.4.1.14.1.6 | ColumnbiboAdmConfigState | read-only | current | The state of this command (i.e., biboAdmConfigCmd). todo(1) : the command will start soon running(2) : the command is currently executing done(3) : the command… |
| 1.3.6.1.4.1.272.4.1.14.1.7 | ColumnbiboAdmConfigFile | read-write | current | TFTP filename to read/write from/to the specified host. The configuration file received is stored in flash memory specified by biboAdmConfigPath. The actual co… |
| 1.3.6.1.4.1.272.4.1.14.1.8 | ColumnbiboAdmConfigTimeout | read-write | current | Set this value (default 0) to delay a new command for this amount of seconds. The value is counting down to show the remaining time (State=delayed). To stop a … |
| 1.3.6.1.4.1.272.4.1.14.1.9 | ColumnbiboAdmConfigHostUrl | read-write | current | This is a host URL specifying the location to retrieve or store the configuration file. The last filename part must be missing and is given in biboAdmConfigFil… |
| 1.3.6.1.4.1.272.4.1.14.1.10 | ColumnbiboAdmConfigCertIndex | read-write | current | The index of the certificate to use (from the certTable). Only used for biboAdmConfigCmd = get / get-all and for use with biboAdmConfigHostUrl, of course. If s… |
| 1.3.6.1.4.1.272.4.1.15 | TablebiboAdmConfigDirTable | not-accessible | current | Configuration directory table. This table contains all available configuration files in flash memory. |
| 1.3.6.1.4.1.272.4.1.15.1 | RowbiboAdmConfigDirEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.15.1.1 | ColumnbiboAdmConfigDirName | read-only | current | Name of the configuration file in flash memory. |
| 1.3.6.1.4.1.272.4.1.15.1.2 | ColumnbiboAdmConfigDirCount | read-only | current | Number of tables saved in the file. |
| 1.3.6.1.4.1.272.4.1.15.1.3 | ColumnbiboAdmConfigDirContent | read-only | current | Description of directory's contents (e.g., <all> or a series of table numbers). |
| 1.3.6.1.4.1.272.4.1.17 | TablebiboAdmBoardTable | not-accessible | current | The biboAdmBoardTable lists information about the installed communications modules. This table is updated after every system boot up. Creating entries: Entries… |
| 1.3.6.1.4.1.272.4.1.17.1 | RowbiboAdmBoardEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.17.1.1 | ColumnbiboABrdSlot | read-only | current | The slot, or location of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.2 | ColumnbiboABrdType | read-only | current | The name of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.3 | ColumnbiboABrdHWRelease | read-only | current | The hardware release of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.4 | ColumnbiboABrdFWRelease | read-only | current | The firmware release of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.5 | ColumnbiboABrdPartNo | read-only | current | The part number of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.6 | ColumnbiboABrdConnector | read-write | obsolete | The type of connector used for this module. For modules with more than one connector this value can be changed/switched by setting this object. For example, th… |
| 1.3.6.1.4.1.272.4.1.17.1.7 | ColumnbiboABrdUnit | read-only | current | The logical unit number of this interface. |
| 1.3.6.1.4.1.272.4.1.17.1.8 | ColumnbiboABrdSerialNo | read-only | current | The serial number of this module. |
| 1.3.6.1.4.1.272.4.1.17.1.9 | ColumnbiboABrdCategory | read-only | current | Board category. It can be one of the following: system-board(1), ethernet(2), isdn-bri(3), isdn-pmx(4), pots(5), dsl(6), wlan(7), tty(8), dsp(9), usb(10), cryp… |
| 1.3.6.1.4.1.272.4.1.18 | TablebiboAdmUsrTrapTable | not-accessible | current | The biboAdmUsrTrapTable lists user-defined objects that are used to create traps. These traps are sent locally, but can also be sent to remote hosts using the … |
| 1.3.6.1.4.1.272.4.1.18.1 | RowbiboAdmUsrTrapEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.18.1.1 | ColumnbiboATrpObj | read-write | current | The object identifier of an object to use. Each time this object's value changes, a trap is created and sent. Either a single leaf (single variable) or a table… |
| 1.3.6.1.4.1.272.4.1.18.1.2 | ColumnbiboATrpStatus | read-write | current | The status of this entry. Upon creation of a new entry, this object's value is set to 'valid'. |
| 1.3.6.1.4.1.272.4.1.19 | ScalarbiboAdmDomainName | read-write | current | Domain name. |
| 1.3.6.1.4.1.272.4.1.20 | ScalarbiboAdmNameServer | read-write | current | IP address of name server. |
| 1.3.6.1.4.1.272.4.1.21 | ScalarbiboAdmNameServ2 | read-write | current | IP address of second name server. |
| 1.3.6.1.4.1.272.4.1.22 | ScalarbiboAdmBridgeEnable | read-write | current | Sets bridging to enable / disable status. |
| 1.3.6.1.4.1.272.4.1.23 | ScalarbiboAdmCapiTcpPort | read-write | current | TCP port for remote CAPI demon. |
| 1.3.6.1.4.1.272.4.1.24 | ScalarbiboAdmTraceTcpPort | read-write | current | TCP port for trace demon. |
| 1.3.6.1.4.1.272.4.1.25 | ScalarbiboAdmRipUdpPort | read-write | current | UDP port for RIP. Setting this object to zero disables RIP. |
| 1.3.6.1.4.1.272.4.1.26 | ScalarbiboAdmSWVersion | read-only | current | This is the software release version. It's either identical to biboAdmSWVersionOS or biboAdmSWVersionOEM. |
| 1.3.6.1.4.1.272.4.1.27 | ScalarbiboAdmTimeServer | read-only | current | The IP address of the time server. |
| 1.3.6.1.4.1.272.4.1.28 | ScalarbiboAdmTimeOffset | read-write | current | This is the time offset from GMT in seconds. If the set value is in the range from -24 to 24, it means hours, and is automatically converted to seconds. |
| 1.3.6.1.4.1.272.4.1.29 | ScalarbiboAdmConsoleSyslog | read-write | current | Specifies whether to direct syslog messages to the console. |
| 1.3.6.1.4.1.272.4.1.30 | ScalarbiboAdmSyslogTableLevel | read-write | current | Specifies which message levels to post to the biboAdmSyslogTable and the console, if applicable. |
| 1.3.6.1.4.1.272.4.1.31 | ScalarbiboAdmSystemId | read-only | current | This object contains the system Identification String. |
| 1.3.6.1.4.1.272.4.1.32 | TablebiboAdmLicInfoTable | not-accessible | current | This table contains an entry for each feature, that can be activated by a license. The licenses have to be entered in the biboAdmLicenseTable. This tabl indica… |
| 1.3.6.1.4.1.272.4.1.32.1 | RowbiboAdmLicInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.32.1.1 | ColumnbiboAdmLicInfoType | read-only | current | The licenseable feature. |
| 1.3.6.1.4.1.272.4.1.32.1.2 | ColumnbiboAdmLicInfoStatus | read-only | current | The current state of the license. |
| 1.3.6.1.4.1.272.4.1.32.1.3 | ColumnbiboAdmLicInfoId | read-only | current | The complete serial id string of the special license. |
| 1.3.6.1.4.1.272.4.1.32.1.4 | ColumnbiboAdmLicInfoSlot | read-only | current | In case of a hardware license corresponding to a dedicated module serial number, it is the slot number of the module. |
| 1.3.6.1.4.1.272.4.1.32.1.5 | ColumnbiboAdmLicInfoMaxLic | read-only | current | The max number of allowed chunks. |
| 1.3.6.1.4.1.272.4.1.32.1.6 | ColumnbiboAdmLicInfoInUse | read-only | current | The current number of chunks in use. |
| 1.3.6.1.4.1.272.4.1.32.1.7 | ColumnbiboAdmLicInfoHwSerial | read-only | current | The complete serial id string of the special license. |
| 1.3.6.1.4.1.272.4.1.32.1.8 | ColumnbiboAdmLicInfoUnit | read-only | current | In case of a hardware license corresponding to a dedicated module serial number, it is the unit number of the module. |
| 1.3.6.1.4.1.272.4.1.32.1.9 | ColumnbiboAdmLicInfoLimit | read-only | current | The maximum number of licenseable chunks. |
| 1.3.6.1.4.1.272.4.1.32.1.10 | ColumnbiboAdmLicInfoFree | read-only | current | The number of free default licences. |
| 1.3.6.1.4.1.272.4.1.33 | ScalarbiboAdmBootpRelayServer | read-write | current | This object contains the destination IP address to which BOOTP/DHCP request are forwarded by the BIANCA/BRICK BOOTP relay agent. If this entry is empty no BOOT… |
| 1.3.6.1.4.1.272.4.1.34 | ScalarbiboAdmRadiusServer | read-write | current | This object contains the IP address of the RADIUS server (remote dial in user service). If set to 0.0.0.0 RADIUS services are generally disabled (default). The… |
| 1.3.6.1.4.1.272.4.1.35 | ScalarbiboAdmLocalPPPIdent | read-write | current | This is the local ID string used for PPP authentication (PAP/CHAP). In pre4.3 versions the sysName has been used as the local ID string. This is, for increased… |
| 1.3.6.1.4.1.272.4.1.36 | ScalarbiboAdmHttpTcpPort | read-write | current | TCP port for the HTTP server. Default port is 80, 0 disables the HTTP server. |
| 1.3.6.1.4.1.272.4.1.37 | ScalarbiboAdmTapiTcpPort | read-write | current | TCP port for remote TAPI demon. |
| 1.3.6.1.4.1.272.4.1.38 | ScalarbiboAdmTimeProtocol | read-only | current | This field specifies from which source the bricks internal clock is synchronised: none(1) = no time synchronisation time-udp(2) = UDP/TIME (RFC 868), from bibo… |
| 1.3.6.1.4.1.272.4.1.39 | ScalarbiboAdmTimeUpdate | read-write | current | This is the interval for timeserver requests (in seconds). If the set value is in the range from -24 to 24, it means hours, and is automatically converted to s… |
| 1.3.6.1.4.1.272.4.1.40 | ScalarbiboAdmWINS1 | read-write | current | The IP address of the WINS server (NetBIOS Name Server). |
| 1.3.6.1.4.1.272.4.1.41 | ScalarbiboAdmWINS2 | read-write | current | The IP address of the alternate WINS server. |
| 1.3.6.1.4.1.272.4.1.42 | TablebiboAdmCardTable | not-accessible | current | The biboAdmCardTable lists installed cards. |
| 1.3.6.1.4.1.272.4.1.42.1 | RowbiboAdmCardEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.42.1.1 | ColumnbiboACrdSlot | read-only | current | The slot, or location of this card. |
| 1.3.6.1.4.1.272.4.1.42.1.2 | ColumnbiboACrdType | read-only | current | The name of this card. |
| 1.3.6.1.4.1.272.4.1.42.1.3 | ColumnbiboACrdState | read-only | current | State of the card. |
| 1.3.6.1.4.1.272.4.1.42.1.4 | ColumnbiboACrdCpldVersion | read-only | current | Version of onboard CPLD. |
| 1.3.6.1.4.1.272.4.1.42.1.5 | ColumnbiboACrdFpgaVersion | read-only | current | Version of loaded FPGA firmware. |
| 1.3.6.1.4.1.272.4.1.42.1.6 | ColumnbiboACrdTemp | read-only | current | This variable shows the actual card temperature in the unit Celsius. |
| 1.3.6.1.4.1.272.4.1.42.1.7 | ColumnbiboACrdTempAlarmThreshold | read-write | current | Card temperature threshold. |
| 1.3.6.1.4.1.272.4.1.42.1.8 | ColumnbiboACrdTempAlarmTrap | read-only | current | If the card temperature raises above the threshold, a trap is generated every 60 seconds. |
| 1.3.6.1.4.1.272.4.1.42.1.9 | ColumnbiboACrdAdmin | read-write | current | Administrative manipulation of card state. |
| 1.3.6.1.4.1.272.4.1.42.1.10 | ColumnbiboACrdTempAlarmThresholdCriticalLow | read-write | current | Lower Card temperature threshold to return state from critical to normal. Mustn't exceed biboACrdTempAlarmThreshold! When temperature reaches biboACrdTempAlarm… |
| 1.3.6.1.4.1.272.4.1.43 | NodebiboAdmTraps | |||
| 1.3.6.1.4.1.272.4.1.43.1 | NodebiboAdmTrapACrdTempCritical | This trap signifies that the Card temperature raises above the critical alarm-threshold | ||
| 1.3.6.1.4.1.272.4.1.43.2 | NodebiboAdmTrapACrdTempOk | A normal Card temperature has been restored. | ||
| 1.3.6.1.4.1.272.4.1.43.3 | NodebiboAdmTrapACrdDown | This trap signifies that the specified Card is down | ||
| 1.3.6.1.4.1.272.4.1.43.4 | NodebiboAdmTrapACrdRunning | This trap signifies that the specified Card is up/running | ||
| 1.3.6.1.4.1.272.4.1.43.5 | NodebiboAdmTrapACrdFailed | This trap signifies that the specified Card has failed | ||
| 1.3.6.1.4.1.272.4.1.43.6 | NodebiboAdmTrapACrdStopped | This trap signifies that the specified Card is stopped | ||
| 1.3.6.1.4.1.272.4.1.45 | ScalarbiboAdmExtendedBanner | read-write | current | This is an additional banner message which is displayed after the standard welcome message at boot time. This message is typically used to display info regardi… |
| 1.3.6.1.4.1.272.4.1.47 | ScalarbiboAdmBootpRelayServ2 | read-write | current | This object contains the second destination IP address to which BOOTP/DHCP request are forwarded by the BIANCA/BRICK BOOTP relay agent. If this entry is empty … |
| 1.3.6.1.4.1.272.4.1.48 | ScalarbiboAdmTimedBootPolicy | read-write | current | This object specifies the frequency with which the timed requests the time (using the specified time protocol) after system startup until the first reply is re… |
| 1.3.6.1.4.1.272.4.1.49 | ScalarbiboAdmAcctlogFormat | read-write | current | Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of random strings, backslash escaped sequences lik… |
| 1.3.6.1.4.1.272.4.1.50 | ScalarbiboAdmAcctlogMaxEntries | read-write | current | Maximum Number of accounting messages stored in memory. |
| 1.3.6.1.4.1.272.4.1.51 | TablebiboAdmAcctlogTable | not-accessible | current | The biboAdmAcctlogTable keeps track of accounting messages received. The columns specify attributes for each message generated. As this information only report… |
| 1.3.6.1.4.1.272.4.1.51.1 | RowbiboAdmAcctlogEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.1.51.1.1 | ColumnbiboAdmAcctlogTimeStamp | read-only | current | Time message was generated. |
| 1.3.6.1.4.1.272.4.1.51.1.2 | ColumnbiboAdmAcctlogLevel | read-only | current | Level of acct message. |
| 1.3.6.1.4.1.272.4.1.51.1.4 | ColumnbiboAdmAcctlogMessage | read-only | current | The text of the acct message. |
| 1.3.6.1.4.1.272.4.1.51.1.5 | ColumnbiboAdmAcctlogSubject | read-only | current | Subject of the acct message. |
| 1.3.6.1.4.1.272.4.1.52 | ScalarbiboAdmTimeSource | read-only | current | The source of the current system time. |
| 1.3.6.1.4.1.272.4.1.53 | ScalarbiboAdmIsdnTimeUpdate | read-write | current | This object specifies whether a time value which has been retrieved via ISDN should be used to set the system time. Note that the time retrieved via ISDN is ig… |
| 1.3.6.1.4.1.272.4.1.54 | TabletimeServerTable | not-accessible | current | This table contains the list of time servers. |
| 1.3.6.1.4.1.272.4.1.54.1 | RowtimeServerEntry | not-accessible | current | This object contains a time server entry. |
| 1.3.6.1.4.1.272.4.1.54.1.1 | ColumntimeSrvPriority | read-write | current | The priority of the time server. The time servers are queried in the order of ascending priority value, i.e. 0 first, 1 second ... . |
| 1.3.6.1.4.1.272.4.1.54.1.2 | ColumntimeSrvProtocol | read-write | current | The protocol used for the time server. |
| 1.3.6.1.4.1.272.4.1.54.1.3 | ColumntimeSrvAddress | read-write | current | The IP Address or DNS name of the time server. If a DNS name is specified here, it is resolved on demand. |
| 1.3.6.1.4.1.272.4.1.55 | ScalarbiboAdmSyslogTcpRetries | read-write | current | Maximum number of attempts to connect a syslog server over TCP. |
| 1.3.6.1.4.1.272.4.1.56 | ScalarbiboAdmSWVersionOS | read-only | current | This is the OS software release version as it was always found in biboAdmSWVersion. |
| 1.3.6.1.4.1.272.4.1.57 | ScalarbiboAdmSWVersionOEM | read-only | current | This is the OEM software release version. Either there's a separate OEM version defined or this is identical to biboAdmSWVersionOS. |
| 1.3.6.1.4.1.272.4.1.58 | ScalarbiboAdmStartMode | read-only | current | If service procedure is activated, mode is set to service, otherwise mode is set to normal. |
| 1.3.6.1.4.1.272.4.1.59 | ScalarbiboAdmNTPServer | read-write | current | This field controls the NTP server. If it is set to disabled(1) client requests will be ignored. Setting it to enabled(2) on every client request a server answ… |
| 1.3.6.1.4.1.272.4.1.60 | ScalarbiboAdmTimeZone | read-write | current | The name of the currently set timezone. The corresponding timezone must exist in timeZoneTable. |
| 1.3.6.1.4.1.272.4.1.61 | TabletimeZoneTable | not-accessible | current | This table contains the list of availabe timezones. |
| 1.3.6.1.4.1.272.4.1.61.1 | RowtimeZoneEntry | not-accessible | current | This object contains a time zone entry. |
| 1.3.6.1.4.1.272.4.1.61.1.1 | ColumntimeZoneIndex | read-only | current | Index in Timezone Table. |
| 1.3.6.1.4.1.272.4.1.61.1.2 | ColumntimeZoneName | read-only | current | The Name of a Timezone. |
| 1.3.6.1.4.1.272.4.1.61.1.3 | ColumntimeZoneAlias | read-only | current | The abbreviation of a timezone. |
| 1.3.6.1.4.1.272.4.1.61.1.4 | ColumntimeZoneOffset | read-only | current | Timezone offset from UTC in seconds. Note that this contains no information about daylight saving for this timezone |
| 1.3.6.1.4.1.272.4.17.500 | NodesysStat | |||
| 1.3.6.1.4.1.272.4.17.500.1 | ScalarsysStatBootConfig | read-only | current | After system boot this variable shows which configuration was loaded: none: no configuration whatsoever bootfac: factory boot configuration default: default co… |
| 1.3.6.1.4.1.272.4.17.500.2 | ScalarsysStatFunctionState | read-only | current | This variable contains the current function state, which is toggeled by pressing the function button on the device. |
| 1.3.6.1.4.1.272.4.22 | Nodeadmin-2 | |||
| 1.3.6.1.4.1.272.4.22.1 | Nodeextadmin | |||
| 1.3.6.1.4.1.272.4.22.1.1 | ScalarbiboExtAdmMonAddress | read-write | current | The IP address of the host machine running the Activity Monitor program. This program displays the information about the current state of all interfaces. Perio… |
| 1.3.6.1.4.1.272.4.22.1.2 | ScalarbiboExtAdmMonPort | read-write | current | UDP port for the Activity Monitor protocol. |
| 1.3.6.1.4.1.272.4.22.1.3 | ScalarbiboExtAdmMonType | read-write | current | This parameter configures the content of the Activity Monitor packets, or disables it: off : Activity Monitor disabled physical : send only physical interfaces… |
| 1.3.6.1.4.1.272.4.22.1.4 | ScalarbiboExtAdmMonUpdate | read-write | current | This is the time interval for the Activity Monitor for sending packets (in seconds) to the specified IP address. The value of 0 disables sending Activity Monit… |
| 1.3.6.1.4.1.272.4.22.1.5 | ScalarbiboExtAdmProcRouted | read-write | current | enabled: The routed process is running. RIP and/or OSPF are available (subject to licenses). This is the default behavior of the system. Hints: RIP may be enab… |
| 1.3.6.1.4.1.272.4.22.1.7 | ScalarbiboExtAdmProcWatchDog | read-write | current | enabled: The watchd process is running. up/down transitions on interfaces delivered by various protocols like ping/ifOperStatus/VRRP are processed by parsing a… |
| 1.3.6.1.4.1.272.4.22.1.8 | ScalarbiboExtAdmProcSSHd | read-write | current | enabled: The sshd process is running. disabled: The sshd process is stopped. |
| 1.3.6.1.4.1.272.4.22.1.9 | ScalarbiboExtAdmScheduleInterval | read-write | current | This is the time interval in seconds for the Schedule daemon watching any events (recommended value: 300). The value 0 disables the scheduler. Referring table:… |
| 1.3.6.1.4.1.272.4.22.1.10 | ScalarbiboExtAdmUpdatePath | read-write | current | This is the default URL for automatic SW updates. e.g. http://server/path/ This is used by the update procedure when no filename is given. If this object ends … |
| 1.3.6.1.4.1.272.4.22.1.11 | ScalarbiboExtAdmBackRtVerify | read-write | current | This object activates an additional check for incoming packets. If set to always (1), incoming packets are only accepted if return packets sent back to their s… |
| 1.3.6.1.4.1.272.4.22.1.12 | ScalarbiboExtAdmRerouteViaDefault | read-write | current | This object controls the behaviour of the routing algorithm when a network route exists for routing a packet, but is temporarily unusable because the status of… |
| 1.3.6.1.4.1.272.4.22.1.13 | ScalarbiboExtAdmGUILanguage | read-write | current | This object specifies the language used within the graphical user interface (currently new web based interface only). Valid abbreviations (in principle) are de… |
| 1.3.6.1.4.1.272.4.22.1.14 | ScalarbiboExtAdmIpLogging | read-write | current | This bitfield enables logging of dedicated subsystems within the INET subject: nat : NAT tcppr : TCP processing (MSS clamping, ...) dns : DNS ips : IP session … |
| 1.3.6.1.4.1.272.4.22.1.15 | ScalarbiboExtAdmRadiusNasId | read-write | current | An administratively-assigned NAS identifier for this managed node. If configured this variable is used for each RADIUS request in order to set the associated N… |
| 1.3.6.1.4.1.272.4.22.1.17 | ScalarbiboExtAdmConfigSaveDate | read-only | current | Timestamp when configuration gets/got saved (system local time). |
| 1.3.6.1.4.1.272.4.22.1.18 | ScalarbiboExtAdmSnmpShellPrompt | read-write | current | Defines prompt of application SNMP shell. A set of escape sequences is defined with escape character being a backslash '\': - 'e': gets replaced by escape char… |
| 1.3.6.1.4.1.272.4.22.1.19 | ScalarbiboExtAdmMinArpLifeTime | read-write | current | This object defines the minimum lifetime (in seconds) of ipNetToMediaTable entries. |
| 1.3.6.1.4.1.272.250 | IdentitybiboMIB | MIB module for vendor specific box definitions. Note: bibo stands for BinTec box stemming from the times where the company was still called BinTec. |