BIANCA-BRICK-MIBMODEM-MIB
48 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.18 | Nodemdm | |||
| 1.3.6.1.4.1.272.4.18.1 | TablemdmProfileTable | not-accessible | mandatory | This Table contains entries for the modem profiles. For PPP connections, modem profiles are assigned to incoming connections via the isdnDispatchtable. For out… |
| 1.3.6.1.4.1.272.4.18.1.1 | RowmdmProfileEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.18.1.1.1 | ColumnmdmProfileName | read-only | mandatory | The name of the profile. Eight profiles are available. |
| 1.3.6.1.4.1.272.4.18.1.1.2 | ColumnmdmProfileDescr | read-write | mandatory | Profile Description. Info only. |
| 1.3.6.1.4.1.272.4.18.1.1.3 | ColumnmdmProfileModulation | read-write | mandatory | This object specifies the preferred modulation (automode on) or the modulation (automode disabled) to be used in originating or answering a connection. bell103… |
| 1.3.6.1.4.1.272.4.18.1.1.4 | ColumnmdmProfileMinBps | read-write | mandatory | This object specified the lowest rate, at which the modem may establish a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.5 | ColumnmdmProfileMaxRecvBps | read-write | mandatory | This object specifies the highest receive rate, at which the modem may establsh a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.6 | ColumnmdmProfileMaxXmitBps | read-write | mandatory | This object specifies the highest transmit rate, at which the modem may establsh a connection. |
| 1.3.6.1.4.1.272.4.18.1.1.7 | ColumnmdmProfileAutoMode | read-write | mandatory | When this object is set to on, the modem will automatically negotiate the best rates beginning with the selected Modulation and MaxBps values. Otherwise, it wi… |
| 1.3.6.1.4.1.272.4.18.1.1.8 | ColumnmdmProfileComprV42bis | read-write | mandatory | This object specifies, whether V.42bis compression shall be used for modem connections. When set to off, V.42bis compression will never be used. When set to au… |
| 1.3.6.1.4.1.272.4.18.1.1.9 | ColumnmdmProfileComprMNP5 | read-write | mandatory | This object specifies, whether MNP Class 5 compression shall be used for modem connections. When set to off, MNP Class 5 compression will never be used. When s… |
| 1.3.6.1.4.1.272.4.18.1.1.10 | ColumnmdmProfileErrorCorr | read-write | mandatory | This object specifies the kind of error correction being used for a connection: none no error correction will be used. required either LAPM or MNP will be used… |
| 1.3.6.1.4.1.272.4.18.1.1.11 | ColumnmdmProfileXmitLevel | read-write | mandatory | This object specifies the transmit attenuation in dB. |
| 1.3.6.1.4.1.272.4.18.1.1.12 | ColumnmdmProfileCDWaitTime | read-write | mandatory | This object specifies the amount of time in milliseconds, the modem will wait for the appearance of the carrier. If the carrier will not appear in this time pe… |
| 1.3.6.1.4.1.272.4.18.1.1.13 | ColumnmdmProfileCDRespTime | read-write | mandatory | This object specifies the period of time in milliseconds, a carrier has to be present, before it will be recognized as a carrier. |
| 1.3.6.1.4.1.272.4.18.1.1.14 | ColumnmdmProfileCDDiscTime | read-write | mandatory | This object specifies the amount of time, the carrier has to drop, before the modem will assume the carrier to be lost. |
| 1.3.6.1.4.1.272.4.18.1.1.15 | ColumnmdmProfileRetrain | read-write | mandatory | The modem will : off (1) : disable line quality monitor and auto-retrain. retrain (2) : enable line quality monitor and auto-retrain. fallbf (3) : enable line … |
| 1.3.6.1.4.1.272.4.18.1.1.16 | ColumnmdmProfileIdleTimerMode | read-write | mandatory | The idle timer is used to specify the duration of an interval between successive characters received from the modem which, when exceeded, will cause the modem … |
| 1.3.6.1.4.1.272.4.18.1.1.17 | ColumnmdmProfileIdleTimerFixedDelay | read-write | mandatory | This object specifies the duration of the idle timer in milliseconds (see the object mdmProfileIdleTimerMode for further description). Default: 5 |
| 1.3.6.1.4.1.272.4.18.1.1.18 | ColumnmdmProfileIdleTimerCharDelay | read-write | mandatory | This object specifies the number of characters (octets) which is used to calculate the idle timer corresponding to the actually used receive bit-rate of the mo… |
| 1.3.6.1.4.1.272.4.18.2 | TablemdmTable | not-accessible | mandatory | The mdmTable contains information for each modem. The entries contain various statistical data for modem connections. Only the system can add entries to this t… |
| 1.3.6.1.4.1.272.4.18.2.1 | RowmdmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.18.2.1.1 | ColumnmdmIndex | read-only | mandatory | Index of this modem (Slot/Cpu/Modem) |
| 1.3.6.1.4.1.272.4.18.2.1.2 | ColumnmdmAction | read-write | mandatory | Writing to this variable reboot (1) : initiates a reboot. disabled (2) : remove modem resource from allocation pool. enabled (3) : put modem to allocation reso… |
| 1.3.6.1.4.1.272.4.18.2.1.3 | ColumnmdmType | read-only | mandatory | Type of this modem csm56K (1) : CentralSiteModem K56Flex csm336 (2) : CentralSiteModem 33600 mdm144 (3) : ClientSiteModem 14400 mdm336 (4) : ClientSiteModem 33… |
| 1.3.6.1.4.1.272.4.18.2.1.4 | ColumnmdmState | read-only | mandatory | Current status of the modem. booting (1) : init phase idle (2) : this modem resource is available calling (3) : outgoing call initiated called (4) : incoming c… |
| 1.3.6.1.4.1.272.4.18.2.1.5 | ColumnmdmMode | read-only | mandatory | Type of mode modem (1) : modem native ppp (2) : modem native + async hdlc fax (3) : fax mode dtmf (4) : receive and signal DTMF touchtones voice (5) : support … |
| 1.3.6.1.4.1.272.4.18.2.1.6 | ColumnmdmModulation | read-only | mandatory | Negotiated modulation. same as mdmProfileModulation. |
| 1.3.6.1.4.1.272.4.18.2.1.7 | ColumnmdmErrorCorr | read-only | mandatory | Negotiated error correction protocol. none (1) : no error correction alt (2) : MNP error correction established lapm (3) : LAPM error correction established |
| 1.3.6.1.4.1.272.4.18.2.1.8 | ColumnmdmCompression | read-only | mandatory | Negotiated compression correction protocol. none (1) : no compression class5 (2) : MNP5 compression v42bis (3) : V.42bis compression |
| 1.3.6.1.4.1.272.4.18.2.1.9 | ColumnmdmXmitSpeed | read-only | mandatory | Negotiated transmit speed. |
| 1.3.6.1.4.1.272.4.18.2.1.10 | ColumnmdmRcvSpeed | read-only | mandatory | Negotiated receive speed. |
| 1.3.6.1.4.1.272.4.18.2.1.11 | ColumnmdmIfIndex | read-only | mandatory | the (ISDN) interface's slot this modem is connected to |
| 1.3.6.1.4.1.272.4.18.2.1.12 | ColumnmdmIfBchannel | read-only | mandatory | the (ISDN) interface's B channel this modem is connected to |
| 1.3.6.1.4.1.272.4.18.3 | TablevoipProfileTable | not-accessible | mandatory | This Table contains entries for the voice profiles supported by the installed modem. |
| 1.3.6.1.4.1.272.4.18.3.1 | RowvoipProfileEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.18.3.1.1 | ColumnvoipProfileName | read-only | mandatory | The name of the profile. A maximum of ten profiles is available depending on the hardware/firmware version and availability of license information. voip-profil… |
| 1.3.6.1.4.1.272.4.18.3.1.2 | ColumnvoipProfileDescr | read-write | mandatory | Profile Description. Info only. |
| 1.3.6.1.4.1.272.4.18.3.1.3 | ColumnvoipProfileEncoding | read-write | mandatory | This object specifies the preferred voice encoding algorithm. g711uLaw (1) : G.711 u-Law 64.0 kbit/s g711aLaw (2) : G.711 A-Law 64.0 kbit/s g729a (3) : G.729A … |
| 1.3.6.1.4.1.272.4.18.3.1.4 | ColumnvoipProfileEncapsulation | read-write | mandatory | This object specified the encapsulation mode of the voice data. |
| 1.3.6.1.4.1.272.4.18.3.1.5 | ColumnvoipProfileEchoCancellation | read-write | mandatory | This object enables or disables the G.164 echo cancellation. |
| 1.3.6.1.4.1.272.4.18.3.1.6 | ColumnvoipProfileComfortNoise | read-write | mandatory | This object enables or disables the voice activity detection and comfort noise generation. none (1) : linear voice stream vad (2) : voice activity detection cn… |
| 1.3.6.1.4.1.272.4.18.3.1.7 | ColumnvoipProfilePacketLength | read-write | mandatory | This object defines the default packet length in milliseconds of the different voice compression algorithms. g729 : 10 bytes / 10 ms g723-acelp : 20 bytes / 30… |
| 1.3.6.1.4.1.272.4.18.3.1.8 | ColumnvoipProfilePacketInterval | read-write | mandatory | This object specifies the number of ms coded in one voice data packet. Must be a multiple of the time implicitely defined by voipProfilePacketLength above. |
| 1.3.6.1.4.1.272.4.18.3.1.9 | ColumnvoipProfileJitterBufferDelay | read-write | mandatory | This object specifies the initial delay of the adaptive jitter buffer. |