BIANCA-BRICK-PPPOE-MIB
45 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| RFC1213-MIB | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.24 | Nodepppoe | |||
| 1.3.6.1.4.1.272.4.24.1 | TablepppoeCallTable | not-accessible | mandatory | The pppoeCallTable displays all currently active PPPoE calls (incoming and outgoing). Only the system can add or remove entries to this table. Creating entries… |
| 1.3.6.1.4.1.272.4.24.1.1 | RowpppoeCallEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.24.1.1.1 | ColumnpppoeCallId | read-only | mandatory | System internal and unique ID for the related PPPoE call. |
| 1.3.6.1.4.1.272.4.24.1.1.2 | ColumnpppoeCallDirection | read-only | mandatory | Direction of the PPPoE call, incoming(1) or outgoing(2). |
| 1.3.6.1.4.1.272.4.24.1.1.3 | ColumnpppoeCallAge | read-only | mandatory | The age of the call. For outgoing calls, the time since the call began, or for incoming calls, the time since the call was received. The format is in hh:mm:ss.… |
| 1.3.6.1.4.1.272.4.24.1.1.4 | ColumnpppoeCallState | read-write | mandatory | The state of the PPPoE discovery stage according RFC 2516. |
| 1.3.6.1.4.1.272.4.24.1.1.5 | ColumnpppoeCallRemotePhysAddress | read-only | mandatory | Peer's Ethernet address. |
| 1.3.6.1.4.1.272.4.24.1.1.6 | ColumnpppoeCallLocalPhysAddress | read-only | mandatory | Local Ethernet Address. |
| 1.3.6.1.4.1.272.4.24.1.1.7 | ColumnpppoeCallAcName | read-only | mandatory | The PPPoE access concentrator's name. |
| 1.3.6.1.4.1.272.4.24.1.1.8 | ColumnpppoeCallService | read-only | mandatory | The PPPoE service name, indicating the service the Host is requesting. |
| 1.3.6.1.4.1.272.4.24.1.1.9 | ColumnpppoeCallReceivedPackets | read-only | mandatory | Count of received valid GRE-encapsulated packets. |
| 1.3.6.1.4.1.272.4.24.1.1.10 | ColumnpppoeCallReceivedOctets | read-only | mandatory | Count of received valid Octets. |
| 1.3.6.1.4.1.272.4.24.1.1.11 | ColumnpppoeCallReceivedErrors | read-only | mandatory | Count of received invalid GRE-encapsulated packets. |
| 1.3.6.1.4.1.272.4.24.1.1.12 | ColumnpppoeCallTransmitPackets | read-only | mandatory | Count of transmitted GRE-encapsulated packets. |
| 1.3.6.1.4.1.272.4.24.1.1.13 | ColumnpppoeCallTransmitOctets | read-only | mandatory | Count of transmitted Octets. |
| 1.3.6.1.4.1.272.4.24.1.1.14 | ColumnpppoeCallTransmitErrors | read-only | mandatory | Count of transmit errors. |
| 1.3.6.1.4.1.272.4.24.1.1.15 | ColumnpppoeCallInfo | read-only | mandatory | Additional information to identify the PPPoE call |
| 1.3.6.1.4.1.272.4.24.1.1.16 | ColumnpppoeCallSessionId | read-only | mandatory | The PPPoE session ID, assigned via PPPoE Active Discovery Session-Confirmation (PADS). |
| 1.3.6.1.4.1.272.4.24.1.1.17 | ColumnpppoeCallEthIfIndex | read-only | mandatory | The interface index (ifIndex) of the associated Ethernet device. |
| 1.3.6.1.4.1.272.4.24.1.1.18 | ColumnpppoeCallAssociatedIfIndex | read-only | mandatory | The index of the associated virtual interface. |
| 1.3.6.1.4.1.272.4.24.2 | TablepppoeCreditsTable | not-accessible | mandatory | The pppoeCreditsTable contains informations about current used resources and maximum allowed 'PPPoE-Service'-dependent resources. during a specified interval s… |
| 1.3.6.1.4.1.272.4.24.2.1 | RowpppoeCreditsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.24.2.1.1 | ColumnpppoeCreditsService | read-write | mandatory | The PPPoE service name, indicating the service the Host is requesting. |
| 1.3.6.1.4.1.272.4.24.2.1.2 | ColumnpppoeCreditsSurveillance | read-write | mandatory | Surveillance on or off. |
| 1.3.6.1.4.1.272.4.24.2.1.3 | ColumnpppoeCreditsMeasuretime | read-write | mandatory | Time of one observation interval in seconds. |
| 1.3.6.1.4.1.272.4.24.2.1.4 | ColumnpppoeCreditsMaxInCon | read-write | mandatory | Maximum number of allowed incoming connections during the observation interval. -1 disables this limit. |
| 1.3.6.1.4.1.272.4.24.2.1.5 | ColumnpppoeCreditsMaxOutCon | read-write | mandatory | Maximum number of allowed outgoing connections during the observation interval. -1 disables this limit. |
| 1.3.6.1.4.1.272.4.24.2.1.6 | ColumnpppoeCreditsMaxInDuration | read-write | mandatory | Maximum connect time for incoming connections in seconds during the observation interval. -1 disables this limit. |
| 1.3.6.1.4.1.272.4.24.2.1.7 | ColumnpppoeCreditsMaxOutDuration | read-write | mandatory | Maximum connect time for outgoing connections in seconds during the observation interval. -1 disables this limit |
| 1.3.6.1.4.1.272.4.24.2.1.8 | ColumnpppoeCreditsTimeleft | read-write | mandatory | Time in seconds left in current interval. Writing to Timeleft will restart the observation interval. |
| 1.3.6.1.4.1.272.4.24.2.1.9 | ColumnpppoeCreditsCurrentInCon | read-only | mandatory | Current number of incoming connections. |
| 1.3.6.1.4.1.272.4.24.2.1.10 | ColumnpppoeCreditsCurrentOutCon | read-only | mandatory | Current number of outgoing connections. |
| 1.3.6.1.4.1.272.4.24.2.1.11 | ColumnpppoeCreditsTotalInCon | read-only | mandatory | Total count of incoming connections during the observation interval. |
| 1.3.6.1.4.1.272.4.24.2.1.12 | ColumnpppoeCreditsTotalOutCon | read-only | mandatory | Total count of outgoing connections during the observation interval. |
| 1.3.6.1.4.1.272.4.24.2.1.13 | ColumnpppoeCreditsTotalInDuration | read-only | mandatory | Total connect time of incoming connections during the observation interval. |
| 1.3.6.1.4.1.272.4.24.2.1.14 | ColumnpppoeCreditsTotalOutDuration | read-only | mandatory | Total connect time of outgoing connections during the observation interval. |
| 1.3.6.1.4.1.272.4.24.2.1.15 | ColumnpppoeCreditsCurrentAccount | read-only | mandatory | Total connect time of all outgoing connections during the observation interval calculated in percent of 'pppoeCreditsMaxOutDuration'. |
| 1.3.6.1.4.1.272.4.24.5 | TablepppoePassThroughTable | not-accessible | mandatory | The pppoePassThroughTable is used to enable the PPPoE mode between the two specified Ethernet interfaces. Creating entries: Entries are added by the user. Dele… |
| 1.3.6.1.4.1.272.4.24.5.1 | RowpppoePassThroughEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.24.5.1.1 | ColumnpppoePassThroughEthIfIndex1 | read-write | mandatory | The interface index (ifIndex) of the first associated Ethernet interface. |
| 1.3.6.1.4.1.272.4.24.5.1.2 | ColumnpppoePassThroughEthIfIndex2 | read-write | mandatory | The interface index (ifIndex) of the secondassociated Ethernet interface. |
| 1.3.6.1.4.1.272.4.24.5.1.3 | ColumnpppoePassThroughStatus | read-write | mandatory | The administrative status of this entry. |